1dbb2b5ac0
prototype for trm_detach and freeing all resources. While I'm there, handle better errors in trm_attach and remove the PCI_BASE_ADDR0 definition, since it's what PCIR_MAPS is used for. MFC after: 3 days
3398 lines
89 KiB
C
3398 lines
89 KiB
C
/*
|
|
* O.S : FreeBSD CAM
|
|
* FILE NAME : trm.c
|
|
* BY : C.L. Huang (ching@tekram.com.tw)
|
|
* Erich Chen (erich@tekram.com.tw)
|
|
* Description: Device Driver for Tekram DC395U/UW/F ,DC315/U
|
|
* PCI SCSI Bus Master Host Adapter
|
|
* (SCSI chip set used Tekram ASIC TRM-S1040)
|
|
* (C)Copyright 1995-1999 Tekram Technology Co., Ltd.
|
|
*/
|
|
|
|
/*
|
|
* HISTORY:
|
|
*
|
|
* REV# DATE NAME DESCRIPTION
|
|
* 1.05 05/01/1999 ERICH CHEN First released for 3.x.x (CAM)
|
|
* 1.06 07/29/1999 ERICH CHEN Modify for NEW PCI
|
|
* 1.07 12/12/1999 ERICH CHEN Modify for 3.3.x ,DCB no free
|
|
* 1.08 06/12/2000 ERICH CHEN Modify for 4.x.x
|
|
*/
|
|
|
|
/*
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Imported into FreeBSD source repository, and updated to compile under
|
|
* FreeBSD-3.0-DEVELOPMENT, by Stefan Esser <se@FreeBSD.Org>, 1996-12-17
|
|
*/
|
|
|
|
/*
|
|
* Updated to compile under FreeBSD 5.0-CURRENT by Olivier Houchard
|
|
* <doginou@ci0.org>, 2002-03-04
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/queue.h>
|
|
#if __FreeBSD_version >= 500000
|
|
#include <sys/bio.h>
|
|
#endif
|
|
#include <sys/buf.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/clock.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/cam_debug.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
|
|
#include <dev/trm/trm.h>
|
|
|
|
#define trm_reg_read8(reg) bus_space_read_1(pACB->tag, pACB->bsh, reg)
|
|
#define trm_reg_read16(reg) bus_space_read_2(pACB->tag, pACB->bsh, reg)
|
|
#define trm_reg_read32(reg) bus_space_read_4(pACB->tag, pACB->bsh, reg)
|
|
#define trm_reg_write8(value,reg) bus_space_write_1(pACB->tag, pACB->bsh,\
|
|
reg, value)
|
|
#define trm_reg_write16(value,reg) bus_space_write_2(pACB->tag, pACB->bsh,\
|
|
reg, value)
|
|
#define trm_reg_write32(value,reg) bus_space_write_4(pACB->tag, pACB->bsh,\
|
|
reg, value)
|
|
|
|
#define PCI_Vendor_ID_TEKRAM 0x1DE1
|
|
#define PCI_Device_ID_TRM_S1040 0x0391
|
|
#define PCI_DEVICEID_TRMS1040 0x03911DE1
|
|
|
|
#ifdef trm_DEBUG1
|
|
#define TRM_DPRINTF(fmt, arg...) printf("trm: " fmt, ##arg)
|
|
#else
|
|
#define TRM_DPRINTF(fmt, arg...) {}
|
|
#endif /* TRM_DEBUG */
|
|
|
|
static void trm_check_eeprom(PNVRAMTYPE pEEpromBuf,PACB pACB);
|
|
static void TRM_read_all(PNVRAMTYPE pEEpromBuf,PACB pACB);
|
|
static u_int8_t TRM_get_data(PACB pACB, u_int8_t bAddr);
|
|
static void TRM_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB);
|
|
static void TRM_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData);
|
|
static void TRM_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr);
|
|
static void TRM_wait_30us(PACB pACB);
|
|
|
|
static void trm_Interrupt(void *vpACB);
|
|
static void trm_DataOutPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_DataInPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_CommandPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_StatusPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_MsgOutPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_MsgInPhase0(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_DataOutPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_DataInPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_CommandPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_StatusPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_MsgOutPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_MsgInPhase1(PACB pACB, PSRB pSRB,
|
|
u_int8_t * pscsi_status);
|
|
static void trm_Nop0(PACB pACB, PSRB pSRB, u_int8_t * pscsi_status);
|
|
static void trm_Nop1(PACB pACB, PSRB pSRB, u_int8_t * pscsi_status);
|
|
static void trm_SetXferRate(PACB pACB, PSRB pSRB,PDCB pDCB);
|
|
static void trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir);
|
|
static void trm_Disconnect(PACB pACB);
|
|
static void trm_Reselect(PACB pACB);
|
|
static void trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB);
|
|
static void trm_DoingSRB_Done(PACB pACB);
|
|
static void trm_ScsiRstDetect(PACB pACB);
|
|
static void trm_ResetSCSIBus(PACB pACB);
|
|
static void trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB);
|
|
static void trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB);
|
|
static void trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB);
|
|
static void trm_SendSRB(PACB pACB, PSRB pSRB);
|
|
static int trm_probe(device_t tag);
|
|
static int trm_attach(device_t tag);
|
|
static void trm_reset(PACB pACB);
|
|
|
|
static u_int16_t trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB);
|
|
|
|
static int trm_initAdapter(PACB pACB, u_int16_t unit,
|
|
device_t pci_config_id);
|
|
static void trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit,
|
|
u_int32_t i, u_int32_t j);
|
|
static void trm_initSRB(PSRB psrb);
|
|
static void trm_linkSRB(PACB pACB);
|
|
static void trm_initACB(PACB pACB, u_int16_t unit);
|
|
/* CAM SIM entry points */
|
|
#define ccb_trmsrb_ptr spriv_ptr0
|
|
#define ccb_trmacb_ptr spriv_ptr1
|
|
static void trm_action(struct cam_sim *psim, union ccb *pccb);
|
|
static void trm_poll(struct cam_sim *psim);
|
|
|
|
|
|
static void * trm_SCSI_phase0[] = {
|
|
trm_DataOutPhase0, /* phase:0 */
|
|
trm_DataInPhase0, /* phase:1 */
|
|
trm_CommandPhase0, /* phase:2 */
|
|
trm_StatusPhase0, /* phase:3 */
|
|
trm_Nop0, /* phase:4 */
|
|
trm_Nop1, /* phase:5 */
|
|
trm_MsgOutPhase0, /* phase:6 */
|
|
trm_MsgInPhase0, /* phase:7 */
|
|
};
|
|
|
|
/*
|
|
*
|
|
* stateV = (void *) trm_SCSI_phase1[phase]
|
|
*
|
|
*/
|
|
static void * trm_SCSI_phase1[] = {
|
|
trm_DataOutPhase1, /* phase:0 */
|
|
trm_DataInPhase1, /* phase:1 */
|
|
trm_CommandPhase1, /* phase:2 */
|
|
trm_StatusPhase1, /* phase:3 */
|
|
trm_Nop0, /* phase:4 */
|
|
trm_Nop1, /* phase:5 */
|
|
trm_MsgOutPhase1, /* phase:6 */
|
|
trm_MsgInPhase1, /* phase:7 */
|
|
};
|
|
|
|
|
|
NVRAMTYPE trm_eepromBuf[MAX_ADAPTER_NUM];
|
|
/*
|
|
*Fast20: 000 50ns, 20.0 Mbytes/s
|
|
* 001 75ns, 13.3 Mbytes/s
|
|
* 010 100ns, 10.0 Mbytes/s
|
|
* 011 125ns, 8.0 Mbytes/s
|
|
* 100 150ns, 6.6 Mbytes/s
|
|
* 101 175ns, 5.7 Mbytes/s
|
|
* 110 200ns, 5.0 Mbytes/s
|
|
* 111 250ns, 4.0 Mbytes/s
|
|
*
|
|
*Fast40: 000 25ns, 40.0 Mbytes/s
|
|
* 001 50ns, 20.0 Mbytes/s
|
|
* 010 75ns, 13.3 Mbytes/s
|
|
* 011 100ns, 10.0 Mbytes/s
|
|
* 100 125ns, 8.0 Mbytes/s
|
|
* 101 150ns, 6.6 Mbytes/s
|
|
* 110 175ns, 5.7 Mbytes/s
|
|
* 111 200ns, 5.0 Mbytes/s
|
|
*/
|
|
/* real period: */
|
|
u_int8_t dc395x_trm_clock_period[] = {
|
|
12,/* 48 ns 20 MB/sec */
|
|
18,/* 72 ns 13.3 MB/sec */
|
|
25,/* 100 ns 10.0 MB/sec */
|
|
31,/* 124 ns 8.0 MB/sec */
|
|
37,/* 148 ns 6.6 MB/sec */
|
|
43,/* 172 ns 5.7 MB/sec */
|
|
50,/* 200 ns 5.0 MB/sec */
|
|
62 /* 248 ns 4.0 MB/sec */
|
|
};
|
|
|
|
u_int8_t dc395x_trm_tinfo_sync_period[] = {
|
|
12,/* 20.0 MB/sec */
|
|
18,/* 13.3 MB/sec */
|
|
25,/* 10.0 MB/sec */
|
|
31,/* 8.0 MB/sec */
|
|
37,/* 6.6 MB/sec */
|
|
43,/* 5.7 MB/sec */
|
|
50,/* 5.0 MB/sec */
|
|
62,/* 4.0 MB/sec */
|
|
};
|
|
|
|
static PSRB
|
|
trm_GetSRB(PACB pACB)
|
|
{
|
|
int intflag;
|
|
PSRB pSRB;
|
|
|
|
intflag = splcam();
|
|
pSRB = pACB->pFreeSRB;
|
|
if (pSRB) {
|
|
pACB->pFreeSRB = pSRB->pNextSRB;
|
|
pSRB->pNextSRB = NULL;
|
|
}
|
|
splx(intflag);
|
|
return (pSRB);
|
|
}
|
|
|
|
static void
|
|
trm_RewaitSRB0(PDCB pDCB, PSRB pSRB)
|
|
{
|
|
PSRB psrb1;
|
|
int intflag;
|
|
|
|
intflag = splcam();
|
|
if ((psrb1 = pDCB->pWaitingSRB)) {
|
|
pSRB->pNextSRB = psrb1;
|
|
pDCB->pWaitingSRB = pSRB;
|
|
} else {
|
|
pSRB->pNextSRB = NULL;
|
|
pDCB->pWaitingSRB = pSRB;
|
|
pDCB->pWaitLastSRB = pSRB;
|
|
}
|
|
splx(intflag);
|
|
}
|
|
|
|
static void
|
|
trm_RewaitSRB(PDCB pDCB, PSRB pSRB)
|
|
{
|
|
PSRB psrb1;
|
|
int intflag;
|
|
u_int8_t bval;
|
|
|
|
intflag = splcam();
|
|
pDCB->GoingSRBCnt--;
|
|
psrb1 = pDCB->pGoingSRB;
|
|
if (pSRB == psrb1)
|
|
pDCB->pGoingSRB = psrb1->pNextSRB;
|
|
else {
|
|
while (pSRB != psrb1->pNextSRB)
|
|
psrb1 = psrb1->pNextSRB;
|
|
psrb1->pNextSRB = pSRB->pNextSRB;
|
|
if (pSRB == pDCB->pGoingLastSRB)
|
|
pDCB->pGoingLastSRB = psrb1;
|
|
}
|
|
if ((psrb1 = pDCB->pWaitingSRB)) {
|
|
pSRB->pNextSRB = psrb1;
|
|
pDCB->pWaitingSRB = pSRB;
|
|
} else {
|
|
pSRB->pNextSRB = NULL;
|
|
pDCB->pWaitingSRB = pSRB;
|
|
pDCB->pWaitLastSRB = pSRB;
|
|
}
|
|
bval = pSRB->TagNumber;
|
|
pDCB->TagMask &= (~(1 << bval)); /* Free TAG number */
|
|
splx(intflag);
|
|
}
|
|
|
|
static void
|
|
trm_DoWaitingSRB(PACB pACB)
|
|
{
|
|
int intflag;
|
|
PDCB ptr, ptr1;
|
|
PSRB pSRB;
|
|
|
|
intflag = splcam();
|
|
if (!(pACB->pActiveDCB) &&
|
|
!(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) {
|
|
ptr = pACB->pDCBRunRobin;
|
|
if (!ptr) {
|
|
ptr = pACB->pLinkDCB;
|
|
pACB->pDCBRunRobin = ptr;
|
|
}
|
|
ptr1 = ptr;
|
|
for (;ptr1 ;) {
|
|
pACB->pDCBRunRobin = ptr1->pNextDCB;
|
|
if (!(ptr1->MaxCommand > ptr1->GoingSRBCnt)
|
|
|| !(pSRB = ptr1->pWaitingSRB)) {
|
|
if (pACB->pDCBRunRobin == ptr)
|
|
break;
|
|
ptr1 = ptr1->pNextDCB;
|
|
} else {
|
|
if (!trm_StartSCSI(pACB, ptr1, pSRB)) {
|
|
/*
|
|
* If trm_StartSCSI return 0 :
|
|
* current interrupt status is interrupt enable
|
|
* It's said that SCSI processor is unoccupied
|
|
*/
|
|
ptr1->GoingSRBCnt++;
|
|
if (ptr1->pWaitLastSRB == pSRB) {
|
|
ptr1->pWaitingSRB = NULL;
|
|
ptr1->pWaitLastSRB = NULL;
|
|
} else
|
|
ptr1->pWaitingSRB = pSRB->pNextSRB;
|
|
pSRB->pNextSRB = NULL;
|
|
if (ptr1->pGoingSRB)
|
|
ptr1->pGoingLastSRB->pNextSRB = pSRB;
|
|
else
|
|
ptr1->pGoingSRB = pSRB;
|
|
ptr1->pGoingLastSRB = pSRB;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
splx(intflag);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
trm_SRBwaiting(PDCB pDCB, PSRB pSRB)
|
|
{
|
|
|
|
if (pDCB->pWaitingSRB) {
|
|
pDCB->pWaitLastSRB->pNextSRB = pSRB;
|
|
pDCB->pWaitLastSRB = pSRB;
|
|
pSRB->pNextSRB = NULL;
|
|
} else {
|
|
pDCB->pWaitingSRB = pSRB;
|
|
pDCB->pWaitLastSRB = pSRB;
|
|
}
|
|
}
|
|
|
|
static void
|
|
trm_ExecuteSRB(void *arg, bus_dma_segment_t *dm_segs, int nseg, int vp)
|
|
{
|
|
int flags;
|
|
PACB pACB;
|
|
PSRB pSRB;
|
|
union ccb *ccb;
|
|
u_long totalxferlen=0;
|
|
|
|
pSRB = (PSRB)arg;
|
|
ccb = pSRB->pccb;
|
|
pACB = (PACB)ccb->ccb_h.ccb_trmacb_ptr;
|
|
TRM_DPRINTF("trm_ExecuteSRB..........\n");
|
|
if (nseg != 0) {
|
|
PSEG psg;
|
|
bus_dma_segment_t *end_seg;
|
|
bus_dmasync_op_t op;
|
|
|
|
/* Copy the segments into our SG list */
|
|
end_seg = dm_segs + nseg;
|
|
psg = (PSEG) &pSRB->SegmentX[0];
|
|
pSRB->SRBSGListPointer= psg;
|
|
while (dm_segs < end_seg) {
|
|
psg->address = vp?(u_long)vtophys(dm_segs->ds_addr)
|
|
:(u_long)dm_segs->ds_addr;
|
|
psg->length = (u_long)dm_segs->ds_len;
|
|
totalxferlen += dm_segs->ds_len;
|
|
psg++;
|
|
dm_segs++;
|
|
}
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
op = BUS_DMASYNC_PREREAD;
|
|
} else {
|
|
op = BUS_DMASYNC_PREWRITE;
|
|
}
|
|
bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op);
|
|
}
|
|
pSRB->RetryCnt = 0;
|
|
pSRB->SRBTotalXferLength=totalxferlen;
|
|
pSRB->SRBSGCount = nseg;
|
|
pSRB->SRBSGIndex = 0;
|
|
pSRB->AdaptStatus = 0;
|
|
pSRB->TargetStatus = 0;
|
|
pSRB->MsgCnt = 0;
|
|
pSRB->SRBStatus = 0;
|
|
pSRB->SRBFlag = 0;
|
|
pSRB->SRBState = 0;
|
|
pSRB->ScsiPhase = PH_BUS_FREE; /* SCSI bus free Phase */
|
|
|
|
flags = splcam();
|
|
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
|
|
if (nseg != 0)
|
|
bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap);
|
|
pSRB->pNextSRB = pACB->pFreeSRB;
|
|
pACB->pFreeSRB = pSRB;
|
|
xpt_done(ccb);
|
|
splx(flags);
|
|
return;
|
|
}
|
|
ccb->ccb_h.status |= CAM_SIM_QUEUED;
|
|
#if 0
|
|
/* XXX Need a timeout handler */
|
|
ccb->ccb_h.timeout_ch = timeout(trmtimeout, (caddr_t)srb, (ccb->ccb_h.timeout * hz) / 1000);
|
|
#endif
|
|
trm_SendSRB(pACB, pSRB);
|
|
splx(flags);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
trm_SendSRB(PACB pACB, PSRB pSRB)
|
|
{
|
|
int intflag;
|
|
PDCB pDCB;
|
|
|
|
intflag = splcam();
|
|
pDCB = pSRB->pSRBDCB;
|
|
if (!(pDCB->MaxCommand > pDCB->GoingSRBCnt) || (pACB->pActiveDCB)
|
|
|| (pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) {
|
|
TRM_DPRINTF("pDCB->MaxCommand=%d \n",pDCB->MaxCommand);
|
|
TRM_DPRINTF("pDCB->GoingSRBCnt=%d \n",pDCB->GoingSRBCnt);
|
|
TRM_DPRINTF("pACB->pActiveDCB=%8x \n",(u_int)pACB->pActiveDCB);
|
|
TRM_DPRINTF("pACB->ACBFlag=%x \n",pACB->ACBFlag);
|
|
trm_SRBwaiting(pDCB, pSRB);
|
|
goto SND_EXIT;
|
|
}
|
|
|
|
if (pDCB->pWaitingSRB) {
|
|
trm_SRBwaiting(pDCB, pSRB);
|
|
pSRB = pDCB->pWaitingSRB;
|
|
pDCB->pWaitingSRB = pSRB->pNextSRB;
|
|
pSRB->pNextSRB = NULL;
|
|
}
|
|
|
|
if (!trm_StartSCSI(pACB, pDCB, pSRB)) {
|
|
/*
|
|
* If trm_StartSCSI return 0 :
|
|
* current interrupt status is interrupt enable
|
|
* It's said that SCSI processor is unoccupied
|
|
*/
|
|
pDCB->GoingSRBCnt++; /* stack waiting SRB*/
|
|
if (pDCB->pGoingSRB) {
|
|
pDCB->pGoingLastSRB->pNextSRB = pSRB;
|
|
pDCB->pGoingLastSRB = pSRB;
|
|
} else {
|
|
pDCB->pGoingSRB = pSRB;
|
|
pDCB->pGoingLastSRB = pSRB;
|
|
}
|
|
} else {
|
|
/*
|
|
* If trm_StartSCSI return 1 :
|
|
* current interrupt status is interrupt disreenable
|
|
* It's said that SCSI processor has more one SRB need to do
|
|
*/
|
|
trm_RewaitSRB0(pDCB, pSRB);
|
|
}
|
|
SND_EXIT:
|
|
splx(intflag);
|
|
/*
|
|
* enable interrupt
|
|
*/
|
|
return;
|
|
}
|
|
|
|
|
|
static void
|
|
trm_action(struct cam_sim *psim, union ccb *pccb)
|
|
{
|
|
PACB pACB;
|
|
u_int target_id,target_lun;
|
|
|
|
CAM_DEBUG(pccb->ccb_h.path, CAM_DEBUG_TRACE, ("trm_action\n"));
|
|
|
|
pACB = (PACB) cam_sim_softc(psim);
|
|
target_id = pccb->ccb_h.target_id;
|
|
target_lun = pccb->ccb_h.target_lun;
|
|
|
|
switch (pccb->ccb_h.func_code) {
|
|
case XPT_NOOP:
|
|
TRM_DPRINTF(" XPT_NOOP \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Execute the requested I/O operation
|
|
*/
|
|
case XPT_SCSI_IO: {
|
|
PDCB pDCB = NULL;
|
|
PSRB pSRB;
|
|
struct ccb_scsiio *pcsio;
|
|
|
|
pcsio = &pccb->csio;
|
|
TRM_DPRINTF(" XPT_SCSI_IO \n");
|
|
TRM_DPRINTF("trm: target_id= %d target_lun= %d \n"
|
|
,target_id, target_lun);
|
|
TRM_DPRINTF(
|
|
"pACB->scan_devices[target_id][target_lun]= %d \n"
|
|
,pACB->scan_devices[target_id][target_lun]);
|
|
pDCB = pACB->pDCB[target_id][target_lun];
|
|
/*
|
|
* Assign an SRB and connect it with this ccb.
|
|
*/
|
|
pSRB = trm_GetSRB(pACB);
|
|
if (!pSRB) {
|
|
/* Freeze SIMQ */
|
|
pccb->ccb_h.status = CAM_RESRC_UNAVAIL;
|
|
xpt_done(pccb);
|
|
return;
|
|
}
|
|
pSRB->pSRBDCB = pDCB;
|
|
pccb->ccb_h.ccb_trmsrb_ptr = pSRB;
|
|
pccb->ccb_h.ccb_trmacb_ptr = pACB;
|
|
pSRB->pccb = pccb;
|
|
pSRB->ScsiCmdLen = pcsio->cdb_len;
|
|
/*
|
|
* move layer of CAM command block to layer of SCSI
|
|
* Request Block for SCSI processor command doing
|
|
*/
|
|
bcopy(pcsio->cdb_io.cdb_bytes,pSRB->CmdBlock
|
|
,pcsio->cdb_len);
|
|
if ((pccb->ccb_h.flags & CAM_DIR_MASK)
|
|
!= CAM_DIR_NONE) {
|
|
if ((pccb->ccb_h.flags &
|
|
CAM_SCATTER_VALID) == 0) {
|
|
if ((pccb->ccb_h.flags
|
|
& CAM_DATA_PHYS) == 0) {
|
|
int flags;
|
|
int error;
|
|
|
|
flags = splsoftvm();
|
|
error = bus_dmamap_load(
|
|
pACB->buffer_dmat,
|
|
pSRB->dmamap,
|
|
pcsio->data_ptr,
|
|
pcsio->dxfer_len,
|
|
trm_ExecuteSRB,
|
|
pSRB,
|
|
0);
|
|
if (error == EINPROGRESS) {
|
|
xpt_freeze_simq(
|
|
pACB->psim,
|
|
1);
|
|
pccb->ccb_h.status |=
|
|
CAM_RELEASE_SIMQ;
|
|
}
|
|
splx(flags);
|
|
} else {
|
|
struct bus_dma_segment seg;
|
|
|
|
/* Pointer to physical buffer */
|
|
seg.ds_addr =
|
|
(bus_addr_t)pcsio->data_ptr;
|
|
seg.ds_len = pcsio->dxfer_len;
|
|
trm_ExecuteSRB(pSRB, &seg, 1,
|
|
0);
|
|
}
|
|
} else {
|
|
/* CAM_SCATTER_VALID */
|
|
struct bus_dma_segment *segs;
|
|
|
|
if ((pccb->ccb_h.flags &
|
|
CAM_SG_LIST_PHYS) == 0 ||
|
|
(pccb->ccb_h.flags
|
|
& CAM_DATA_PHYS) != 0) {
|
|
pSRB->pNextSRB = pACB->pFreeSRB;
|
|
pACB->pFreeSRB = pSRB;
|
|
pccb->ccb_h.status =
|
|
CAM_PROVIDE_FAIL;
|
|
xpt_done(pccb);
|
|
return;
|
|
}
|
|
|
|
/* cam SG list is physical,
|
|
* cam data is virtual
|
|
*/
|
|
segs = (struct bus_dma_segment *)
|
|
pcsio->data_ptr;
|
|
trm_ExecuteSRB(pSRB, segs,
|
|
pcsio->sglist_cnt, 1);
|
|
} /* CAM_SCATTER_VALID */
|
|
} else
|
|
trm_ExecuteSRB(pSRB, NULL, 0, 0);
|
|
}
|
|
break;
|
|
case XPT_GDEV_TYPE:
|
|
TRM_DPRINTF(" XPT_GDEV_TYPE \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
case XPT_GDEVLIST:
|
|
TRM_DPRINTF(" XPT_GDEVLIST \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Path routing inquiry
|
|
* Path Inquiry CCB
|
|
*/
|
|
case XPT_PATH_INQ: {
|
|
struct ccb_pathinq *cpi = &pccb->cpi;
|
|
|
|
TRM_DPRINTF(" XPT_PATH_INQ \n");
|
|
cpi->version_num = 1;
|
|
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
|
|
cpi->target_sprt = 0;
|
|
cpi->hba_misc = 0;
|
|
cpi->hba_eng_cnt = 0;
|
|
cpi->max_target = 15 ;
|
|
cpi->max_lun = pACB->max_lun; /* 7 or 0 */
|
|
cpi->initiator_id = pACB->AdaptSCSIID;
|
|
cpi->bus_id = cam_sim_bus(psim);
|
|
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(cpi->hba_vid, "Tekram_TRM", HBA_IDLEN);
|
|
strncpy(cpi->dev_name, cam_sim_name(psim), DEV_IDLEN);
|
|
cpi->unit_number = cam_sim_unit(psim);
|
|
cpi->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(pccb);
|
|
}
|
|
break;
|
|
/*
|
|
* Release a frozen SIM queue
|
|
* Release SIM Queue
|
|
*/
|
|
case XPT_REL_SIMQ:
|
|
TRM_DPRINTF(" XPT_REL_SIMQ \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Set Asynchronous Callback Parameters
|
|
* Set Asynchronous Callback CCB
|
|
*/
|
|
case XPT_SASYNC_CB:
|
|
TRM_DPRINTF(" XPT_SASYNC_CB \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Set device type information
|
|
* Set Device Type CCB
|
|
*/
|
|
case XPT_SDEV_TYPE:
|
|
TRM_DPRINTF(" XPT_SDEV_TYPE \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* (Re)Scan the SCSI Bus
|
|
* Rescan the given bus, or bus/target/lun
|
|
*/
|
|
case XPT_SCAN_BUS:
|
|
TRM_DPRINTF(" XPT_SCAN_BUS \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Get EDT entries matching the given pattern
|
|
*/
|
|
case XPT_DEV_MATCH:
|
|
TRM_DPRINTF(" XPT_DEV_MATCH \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Turn on debugging for a bus, target or lun
|
|
*/
|
|
case XPT_DEBUG:
|
|
TRM_DPRINTF(" XPT_DEBUG \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* XPT_ABORT = 0x10, Abort the specified CCB
|
|
* Abort XPT request CCB
|
|
*/
|
|
case XPT_ABORT:
|
|
TRM_DPRINTF(" XPT_ABORT \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Reset the specified SCSI bus
|
|
* Reset SCSI Bus CCB
|
|
*/
|
|
case XPT_RESET_BUS: {
|
|
int i;
|
|
|
|
TRM_DPRINTF(" XPT_RESET_BUS \n");
|
|
trm_reset(pACB);
|
|
pACB->ACBFlag=0;
|
|
for (i=0; i<500; i++)
|
|
DELAY(1000);
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(pccb);
|
|
}
|
|
break;
|
|
/*
|
|
* Bus Device Reset the specified SCSI device
|
|
* Reset SCSI Device CCB
|
|
*/
|
|
case XPT_RESET_DEV:
|
|
/*
|
|
* Don't (yet?) support vendor
|
|
* specific commands.
|
|
*/
|
|
TRM_DPRINTF(" XPT_RESET_DEV \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Terminate the I/O process
|
|
* Terminate I/O Process Request CCB
|
|
*/
|
|
case XPT_TERM_IO:
|
|
TRM_DPRINTF(" XPT_TERM_IO \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Scan Logical Unit
|
|
*/
|
|
case XPT_SCAN_LUN:
|
|
TRM_DPRINTF(" XPT_SCAN_LUN \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
|
|
/*
|
|
* Get/Set transfer rate/width/disconnection/tag queueing
|
|
* settings
|
|
* (GET) default/user transfer settings for the target
|
|
*/
|
|
case XPT_GET_TRAN_SETTINGS: {
|
|
struct ccb_trans_settings *cts;
|
|
int intflag;
|
|
struct trm_transinfo *tinfo;
|
|
PDCB pDCB;
|
|
|
|
TRM_DPRINTF(" XPT_GET_TRAN_SETTINGS \n");
|
|
cts = &pccb->cts;
|
|
pDCB = pACB->pDCB[target_id][target_lun];
|
|
intflag = splcam();
|
|
/*
|
|
* disable interrupt
|
|
*/
|
|
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
|
|
/* current transfer settings */
|
|
if (pDCB->tinfo.disc_tag & TRM_CUR_DISCENB)
|
|
cts->flags = CCB_TRANS_DISC_ENB;
|
|
else
|
|
cts->flags = 0;/* no tag & disconnect */
|
|
if (pDCB->tinfo.disc_tag & TRM_CUR_TAGENB)
|
|
cts->flags |= CCB_TRANS_TAG_ENB;
|
|
tinfo = &pDCB->tinfo.current;
|
|
TRM_DPRINTF("CURRENT: cts->flags= %2x \n",
|
|
cts->flags);
|
|
} else {
|
|
/* default(user) transfer settings */
|
|
if (pDCB->tinfo.disc_tag & TRM_USR_DISCENB)
|
|
cts->flags = CCB_TRANS_DISC_ENB;
|
|
else
|
|
cts->flags = 0;
|
|
if (pDCB->tinfo.disc_tag & TRM_USR_TAGENB)
|
|
cts->flags |= CCB_TRANS_TAG_ENB;
|
|
tinfo = &pDCB->tinfo.user;
|
|
TRM_DPRINTF("USER: cts->flags= %2x \n",
|
|
cts->flags);
|
|
}
|
|
cts->sync_period = tinfo->period;
|
|
cts->sync_offset = tinfo->offset;
|
|
cts->bus_width = tinfo->width;
|
|
TRM_DPRINTF("pDCB->SyncPeriod: %d \n",
|
|
pDCB->SyncPeriod);
|
|
TRM_DPRINTF("period: %d \n", tinfo->period);
|
|
TRM_DPRINTF("offset: %d \n", tinfo->offset);
|
|
TRM_DPRINTF("width: %d \n", tinfo->width);
|
|
|
|
splx(intflag);
|
|
cts->valid = CCB_TRANS_SYNC_RATE_VALID |
|
|
CCB_TRANS_SYNC_OFFSET_VALID |
|
|
CCB_TRANS_BUS_WIDTH_VALID |
|
|
CCB_TRANS_DISC_VALID |
|
|
CCB_TRANS_TQ_VALID;
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(pccb);
|
|
}
|
|
break;
|
|
/*
|
|
* Get/Set transfer rate/width/disconnection/tag queueing
|
|
* settings
|
|
* (Set) transfer rate/width negotiation settings
|
|
*/
|
|
case XPT_SET_TRAN_SETTINGS: {
|
|
struct ccb_trans_settings *cts;
|
|
u_int update_type;
|
|
int intflag;
|
|
PDCB pDCB;
|
|
|
|
TRM_DPRINTF(" XPT_SET_TRAN_SETTINGS \n");
|
|
cts = &pccb->cts;
|
|
update_type = 0;
|
|
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
|
|
update_type |= TRM_TRANS_GOAL;
|
|
if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0)
|
|
update_type |= TRM_TRANS_USER;
|
|
intflag = splcam();
|
|
pDCB = pACB->pDCB[target_id][target_lun];
|
|
|
|
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
|
|
/*ccb disc enables */
|
|
if (update_type & TRM_TRANS_GOAL) {
|
|
if ((cts->flags & CCB_TRANS_DISC_ENB)
|
|
!= 0)
|
|
pDCB->tinfo.disc_tag
|
|
|= TRM_CUR_DISCENB;
|
|
else
|
|
pDCB->tinfo.disc_tag &=
|
|
~TRM_CUR_DISCENB;
|
|
}
|
|
if (update_type & TRM_TRANS_USER) {
|
|
if ((cts->flags & CCB_TRANS_DISC_ENB)
|
|
!= 0)
|
|
pDCB->tinfo.disc_tag
|
|
|= TRM_USR_DISCENB;
|
|
else
|
|
pDCB->tinfo.disc_tag &=
|
|
~TRM_USR_DISCENB;
|
|
}
|
|
}
|
|
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
|
|
/* if ccb tag q active */
|
|
if (update_type & TRM_TRANS_GOAL) {
|
|
if ((cts->flags & CCB_TRANS_TAG_ENB)
|
|
!= 0)
|
|
pDCB->tinfo.disc_tag |=
|
|
TRM_CUR_TAGENB;
|
|
else
|
|
pDCB->tinfo.disc_tag &=
|
|
~TRM_CUR_TAGENB;
|
|
}
|
|
if (update_type & TRM_TRANS_USER) {
|
|
if ((cts->flags & CCB_TRANS_TAG_ENB)
|
|
!= 0)
|
|
pDCB->tinfo.disc_tag |=
|
|
TRM_USR_TAGENB;
|
|
else
|
|
pDCB->tinfo.disc_tag &=
|
|
~TRM_USR_TAGENB;
|
|
}
|
|
}
|
|
/* Minimum sync period factor */
|
|
|
|
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) {
|
|
/* if ccb sync active */
|
|
/* TRM-S1040 MinSyncPeriod = 4 clocks/byte */
|
|
if ((cts->sync_period != 0) &&
|
|
(cts->sync_period < 125))
|
|
cts->sync_period = 125;
|
|
/* 1/(125*4) minsync 2 MByte/sec */
|
|
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID)
|
|
!= 0) {
|
|
if (cts->sync_offset == 0)
|
|
cts->sync_period = 0;
|
|
/* TRM-S1040 MaxSyncOffset = 15 bytes*/
|
|
if (cts->sync_offset > 15)
|
|
cts->sync_offset = 15;
|
|
}
|
|
}
|
|
if ((update_type & TRM_TRANS_USER) != 0) {
|
|
pDCB->tinfo.user.period = cts->sync_period;
|
|
pDCB->tinfo.user.offset = cts->sync_offset;
|
|
pDCB->tinfo.user.width = cts->bus_width;
|
|
}
|
|
if ((update_type & TRM_TRANS_GOAL) != 0) {
|
|
pDCB->tinfo.goal.period = cts->sync_period;
|
|
pDCB->tinfo.goal.offset = cts->sync_offset;
|
|
pDCB->tinfo.goal.width = cts->bus_width;
|
|
}
|
|
splx(intflag);
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(pccb);
|
|
break;
|
|
}
|
|
/*
|
|
* Calculate the geometry parameters for a device give
|
|
* the sector size and volume size.
|
|
*/
|
|
case XPT_CALC_GEOMETRY: {
|
|
struct ccb_calc_geometry *ccg;
|
|
u_int32_t size_mb;
|
|
u_int32_t secs_per_cylinder;
|
|
int extended;
|
|
|
|
TRM_DPRINTF(" XPT_CALC_GEOMETRY \n");
|
|
ccg = &pccb->ccg;
|
|
size_mb = ccg->volume_size /
|
|
((1024L * 1024L) / ccg->block_size);
|
|
extended = 1;
|
|
if (size_mb > 1024 && extended) {
|
|
ccg->heads = 255;
|
|
ccg->secs_per_track = 63;
|
|
} else {
|
|
ccg->heads = 64;
|
|
ccg->secs_per_track = 32;
|
|
}
|
|
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
|
|
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(pccb);
|
|
}
|
|
break;
|
|
case XPT_ENG_INQ:
|
|
TRM_DPRINTF(" XPT_ENG_INQ \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* HBA execute engine request
|
|
* This structure must match SCSIIO size
|
|
*/
|
|
case XPT_ENG_EXEC:
|
|
TRM_DPRINTF(" XPT_ENG_EXEC \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* XPT_EN_LUN = 0x30, Enable LUN as a target
|
|
* Target mode structures.
|
|
*/
|
|
case XPT_EN_LUN:
|
|
/*
|
|
* Don't (yet?) support vendor
|
|
* specific commands.
|
|
*/
|
|
TRM_DPRINTF(" XPT_EN_LUN \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Execute target I/O request
|
|
*/
|
|
case XPT_TARGET_IO:
|
|
/*
|
|
* Don't (yet?) support vendor
|
|
* specific commands.
|
|
*/
|
|
TRM_DPRINTF(" XPT_TARGET_IO \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Accept Host Target Mode CDB
|
|
*/
|
|
case XPT_ACCEPT_TARGET_IO:
|
|
/*
|
|
* Don't (yet?) support vendor
|
|
* specific commands.
|
|
*/
|
|
TRM_DPRINTF(" XPT_ACCEPT_TARGET_IO \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Continue Host Target I/O Connection
|
|
*/
|
|
case XPT_CONT_TARGET_IO:
|
|
/*
|
|
* Don't (yet?) support vendor
|
|
* specific commands.
|
|
*/
|
|
TRM_DPRINTF(" XPT_CONT_TARGET_IO \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Notify Host Target driver of event
|
|
*/
|
|
case XPT_IMMED_NOTIFY:
|
|
TRM_DPRINTF(" XPT_IMMED_NOTIFY \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* Acknowledgement of event
|
|
*/
|
|
case XPT_NOTIFY_ACK:
|
|
TRM_DPRINTF(" XPT_NOTIFY_ACK \n");
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
/*
|
|
* XPT_VUNIQUE = 0x80
|
|
*/
|
|
case XPT_VUNIQUE:
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
default:
|
|
pccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(pccb);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
trm_poll(struct cam_sim *psim)
|
|
{
|
|
|
|
}
|
|
|
|
static void
|
|
trm_ResetDevParam(PACB pACB)
|
|
{
|
|
PDCB pDCB, pdcb;
|
|
PNVRAMTYPE pEEpromBuf;
|
|
u_int8_t PeriodIndex;
|
|
|
|
pDCB = pACB->pLinkDCB;
|
|
if (pDCB == NULL)
|
|
return;
|
|
pdcb = pDCB;
|
|
do {
|
|
pDCB->SyncMode &= ~(SYNC_NEGO_DONE+ WIDE_NEGO_DONE);
|
|
pDCB->SyncPeriod = 0;
|
|
pDCB->SyncOffset = 0;
|
|
pEEpromBuf = &trm_eepromBuf[pACB->AdapterUnit];
|
|
pDCB->DevMode =
|
|
pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarCfg0;
|
|
pDCB->AdpMode = pEEpromBuf->NvramChannelCfg;
|
|
PeriodIndex =
|
|
pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarPeriod & 0x07;
|
|
pDCB->MaxNegoPeriod = dc395x_trm_clock_period[PeriodIndex];
|
|
if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) &&
|
|
(pACB->Config & HCC_WIDE_CARD))
|
|
pDCB->SyncMode |= WIDE_NEGO_ENABLE;
|
|
pDCB = pDCB->pNextDCB;
|
|
}
|
|
while (pdcb != pDCB);
|
|
}
|
|
|
|
static void
|
|
trm_RecoverSRB(PACB pACB)
|
|
{
|
|
PDCB pDCB, pdcb;
|
|
PSRB psrb, psrb2;
|
|
u_int16_t cnt, i;
|
|
|
|
pDCB = pACB->pLinkDCB;
|
|
if (pDCB == NULL)
|
|
return;
|
|
pdcb = pDCB;
|
|
do {
|
|
cnt = pdcb->GoingSRBCnt;
|
|
psrb = pdcb->pGoingSRB;
|
|
for (i = 0; i < cnt; i++) {
|
|
psrb2 = psrb;
|
|
psrb = psrb->pNextSRB;
|
|
if (pdcb->pWaitingSRB) {
|
|
psrb2->pNextSRB = pdcb->pWaitingSRB;
|
|
pdcb->pWaitingSRB = psrb2;
|
|
} else {
|
|
pdcb->pWaitingSRB = psrb2;
|
|
pdcb->pWaitLastSRB = psrb2;
|
|
psrb2->pNextSRB = NULL;
|
|
}
|
|
}
|
|
pdcb->GoingSRBCnt = 0;
|
|
pdcb->pGoingSRB = NULL;
|
|
pdcb->TagMask = 0;
|
|
pdcb = pdcb->pNextDCB;
|
|
}
|
|
while (pdcb != pDCB);
|
|
}
|
|
|
|
static void
|
|
trm_reset(PACB pACB)
|
|
{
|
|
int intflag;
|
|
u_int16_t i;
|
|
|
|
TRM_DPRINTF("trm: RESET");
|
|
intflag = splcam();
|
|
trm_reg_write8(0x00, TRMREG_DMA_INTEN);
|
|
trm_reg_write8(0x00, TRMREG_SCSI_INTEN);
|
|
|
|
trm_ResetSCSIBus(pACB);
|
|
for (i = 0; i < 500; i++)
|
|
DELAY(1000);
|
|
trm_reg_write8(0x7F, TRMREG_SCSI_INTEN);
|
|
/* Enable DMA interrupt */
|
|
trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN);
|
|
/* Clear DMA FIFO */
|
|
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
|
|
/* Clear SCSI FIFO */
|
|
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
|
|
trm_ResetDevParam(pACB);
|
|
trm_DoingSRB_Done(pACB);
|
|
pACB->pActiveDCB = NULL;
|
|
pACB->ACBFlag = 0;/* RESET_DETECT, RESET_DONE ,RESET_DEV */
|
|
trm_DoWaitingSRB(pACB);
|
|
/* Tell the XPT layer that a bus reset occured */
|
|
if (pACB->ppath != NULL)
|
|
xpt_async(AC_BUS_RESET, pACB->ppath, NULL);
|
|
splx(intflag);
|
|
return;
|
|
}
|
|
|
|
static u_int16_t
|
|
trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB)
|
|
{
|
|
u_int16_t return_code;
|
|
u_int8_t tag_number, scsicommand, i,command,identify_message;
|
|
u_int8_t * ptr;
|
|
u_long tag_mask;
|
|
union ccb *pccb;
|
|
struct ccb_scsiio *pcsio;
|
|
|
|
pccb = pSRB->pccb;
|
|
pcsio = &pccb->csio;
|
|
pSRB->TagNumber = 31;
|
|
|
|
trm_reg_write8(pACB->AdaptSCSIID, TRMREG_SCSI_HOSTID);
|
|
trm_reg_write8(pDCB->TargetID, TRMREG_SCSI_TARGETID);
|
|
trm_reg_write8(pDCB->SyncPeriod, TRMREG_SCSI_SYNC);
|
|
trm_reg_write8(pDCB->SyncOffset, TRMREG_SCSI_OFFSET);
|
|
pSRB->ScsiPhase = PH_BUS_FREE;/* initial phase */
|
|
/* Flush FIFO */
|
|
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
|
|
|
|
identify_message = pDCB->IdentifyMsg;
|
|
|
|
if ((pSRB->CmdBlock[0] == INQUIRY) ||
|
|
(pSRB->CmdBlock[0] == REQUEST_SENSE) ||
|
|
(pSRB->SRBFlag & AUTO_REQSENSE)) {
|
|
if (((pDCB->SyncMode & WIDE_NEGO_ENABLE) &&
|
|
!(pDCB->SyncMode & WIDE_NEGO_DONE)) \
|
|
|| ((pDCB->SyncMode & SYNC_NEGO_ENABLE) &&
|
|
!(pDCB->SyncMode & SYNC_NEGO_DONE))) {
|
|
if (!(pDCB->IdentifyMsg & 7) ||
|
|
(pSRB->CmdBlock[0] != INQUIRY)) {
|
|
scsicommand = SCMD_SEL_ATNSTOP;
|
|
pSRB->SRBState = SRB_MSGOUT;
|
|
goto polling;
|
|
}
|
|
}
|
|
/*
|
|
* Send identify message
|
|
*/
|
|
trm_reg_write8((identify_message & 0xBF) ,TRMREG_SCSI_FIFO);
|
|
scsicommand = SCMD_SEL_ATN;
|
|
pSRB->SRBState = SRB_START_;
|
|
} else {
|
|
/* not inquiry,request sense,auto request sense */
|
|
/*
|
|
* Send identify message
|
|
*/
|
|
trm_reg_write8(identify_message,TRMREG_SCSI_FIFO);
|
|
scsicommand = SCMD_SEL_ATN;
|
|
pSRB->SRBState = SRB_START_;
|
|
if (pDCB->SyncMode & EN_TAG_QUEUING) {
|
|
/* Send Tag message */
|
|
/*
|
|
* Get tag id
|
|
*/
|
|
tag_mask = 1;
|
|
tag_number = 0;
|
|
while (tag_mask & pDCB->TagMask) {
|
|
tag_mask = tag_mask << 1;
|
|
tag_number++;
|
|
}
|
|
/*
|
|
* Send Tag id
|
|
*/
|
|
trm_reg_write8(MSG_SIMPLE_QTAG, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(tag_number, TRMREG_SCSI_FIFO);
|
|
pDCB->TagMask |= tag_mask;
|
|
pSRB->TagNumber = tag_number;
|
|
scsicommand = SCMD_SEL_ATN3;
|
|
pSRB->SRBState = SRB_START_;
|
|
}
|
|
}
|
|
polling:
|
|
/*
|
|
* Send CDB ..command block .........
|
|
*/
|
|
if (pSRB->SRBFlag & AUTO_REQSENSE) {
|
|
trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
} else {
|
|
ptr = (u_int8_t *) pSRB->CmdBlock;
|
|
for (i = 0; i < pSRB->ScsiCmdLen ; i++) {
|
|
command = *ptr++;
|
|
trm_reg_write8(command,TRMREG_SCSI_FIFO);
|
|
}
|
|
}
|
|
if (trm_reg_read16(TRMREG_SCSI_STATUS) & SCSIINTERRUPT) {
|
|
/*
|
|
* If trm_StartSCSI return 1 :
|
|
* current interrupt status is interrupt disreenable
|
|
* It's said that SCSI processor has more one SRB need to do,
|
|
* SCSI processor has been occupied by one SRB.
|
|
*/
|
|
pSRB->SRBState = SRB_READY;
|
|
pDCB->TagMask &= ~(1 << pSRB->TagNumber);
|
|
return_code = 1;
|
|
} else {
|
|
/*
|
|
* If trm_StartSCSI return 0 :
|
|
* current interrupt status is interrupt enable
|
|
* It's said that SCSI processor is unoccupied
|
|
*/
|
|
pSRB->ScsiPhase = SCSI_NOP1; /* SCSI bus free Phase */
|
|
pACB->pActiveDCB = pDCB;
|
|
pDCB->pActiveSRB = pSRB;
|
|
return_code = 0;
|
|
trm_reg_write16(DO_DATALATCH | DO_HWRESELECT,
|
|
TRMREG_SCSI_CONTROL);/* it's important for atn stop*/
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(scsicommand,TRMREG_SCSI_COMMAND);
|
|
}
|
|
return (return_code);
|
|
}
|
|
|
|
static void
|
|
trm_Interrupt(vpACB)
|
|
void *vpACB;
|
|
{
|
|
PACB pACB;
|
|
PDCB pDCB;
|
|
PSRB pSRB;
|
|
u_int16_t phase;
|
|
void (*stateV)(PACB, PSRB, u_int8_t *);
|
|
u_int8_t scsi_status=0, scsi_intstatus;
|
|
|
|
pACB = vpACB;
|
|
|
|
if (pACB == NULL) {
|
|
TRM_DPRINTF("trm_Interrupt: pACB NULL return......");
|
|
return;
|
|
}
|
|
|
|
scsi_status = trm_reg_read16(TRMREG_SCSI_STATUS);
|
|
if (!(scsi_status & SCSIINTERRUPT)) {
|
|
TRM_DPRINTF("trm_Interrupt: TRMREG_SCSI_STATUS scsi_status = NULL ,return......");
|
|
return;
|
|
}
|
|
TRM_DPRINTF("scsi_status=%2x,",scsi_status);
|
|
|
|
scsi_intstatus = trm_reg_read8(TRMREG_SCSI_INTSTATUS);
|
|
|
|
TRM_DPRINTF("scsi_intstatus=%2x,",scsi_intstatus);
|
|
|
|
if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) {
|
|
trm_Disconnect(pACB);
|
|
return;
|
|
}
|
|
|
|
if (scsi_intstatus & INT_RESELECTED) {
|
|
trm_Reselect(pACB);
|
|
return;
|
|
}
|
|
if (scsi_intstatus & INT_SCSIRESET) {
|
|
trm_ScsiRstDetect(pACB);
|
|
return;
|
|
}
|
|
|
|
if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) {
|
|
pDCB = pACB->pActiveDCB;
|
|
pSRB = pDCB->pActiveSRB;
|
|
if (pDCB) {
|
|
if (pDCB->DCBFlag & ABORT_DEV_)
|
|
trm_EnableMsgOutAbort1(pACB, pSRB);
|
|
}
|
|
phase = (u_int16_t) pSRB->ScsiPhase; /* phase: */
|
|
stateV = (void *) trm_SCSI_phase0[phase];
|
|
stateV(pACB, pSRB, &scsi_status);
|
|
pSRB->ScsiPhase = scsi_status & PHASEMASK;
|
|
/* phase:0,1,2,3,4,5,6,7 */
|
|
phase = (u_int16_t) scsi_status & PHASEMASK;
|
|
stateV = (void *) trm_SCSI_phase1[phase];
|
|
stateV(pACB, pSRB, &scsi_status);
|
|
}
|
|
}
|
|
|
|
static void
|
|
trm_MsgOutPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
if (pSRB->SRBState & (SRB_UNEXPECT_RESEL+SRB_ABORT_SENT))
|
|
*pscsi_status = PH_BUS_FREE;
|
|
/*.. initial phase*/
|
|
}
|
|
|
|
static void
|
|
trm_MsgOutPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
u_int8_t bval;
|
|
u_int16_t i, cnt;
|
|
u_int8_t * ptr;
|
|
PDCB pDCB;
|
|
|
|
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
|
|
pDCB = pACB->pActiveDCB;
|
|
if (!(pSRB->SRBState & SRB_MSGOUT)) {
|
|
cnt = pSRB->MsgCnt;
|
|
if (cnt) {
|
|
ptr = (u_int8_t *) pSRB->MsgOutBuf;
|
|
for (i = 0; i < cnt; i++) {
|
|
trm_reg_write8(*ptr, TRMREG_SCSI_FIFO);
|
|
ptr++;
|
|
}
|
|
pSRB->MsgCnt = 0;
|
|
if ((pDCB->DCBFlag & ABORT_DEV_) &&
|
|
(pSRB->MsgOutBuf[0] == MSG_ABORT)) {
|
|
pSRB->SRBState = SRB_ABORT_SENT;
|
|
}
|
|
} else {
|
|
bval = MSG_ABORT;
|
|
if ((pSRB->CmdBlock[0] == INQUIRY) ||
|
|
(pSRB->CmdBlock[0] == REQUEST_SENSE) ||
|
|
(pSRB->SRBFlag & AUTO_REQSENSE)) {
|
|
if (pDCB->SyncMode & SYNC_NEGO_ENABLE) {
|
|
goto mop1;
|
|
}
|
|
}
|
|
trm_reg_write8(bval, TRMREG_SCSI_FIFO);
|
|
}
|
|
} else {
|
|
mop1: /* message out phase */
|
|
if (!(pSRB->SRBState & SRB_DO_WIDE_NEGO)
|
|
&& (pDCB->SyncMode & WIDE_NEGO_ENABLE)) {
|
|
/*
|
|
* WIDE DATA TRANSFER REQUEST code (03h)
|
|
*/
|
|
pDCB->SyncMode &= ~(SYNC_NEGO_DONE | EN_ATN_STOP);
|
|
trm_reg_write8((pDCB->IdentifyMsg & 0xBF),
|
|
TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO);
|
|
/* (01h) */
|
|
trm_reg_write8(2,TRMREG_SCSI_FIFO);
|
|
/* Message length (02h) */
|
|
trm_reg_write8(3,TRMREG_SCSI_FIFO);
|
|
/* wide data xfer (03h) */
|
|
trm_reg_write8(1,TRMREG_SCSI_FIFO);
|
|
/* width:0(8bit),1(16bit),2(32bit) */
|
|
pSRB->SRBState |= SRB_DO_WIDE_NEGO;
|
|
} else if (!(pSRB->SRBState & SRB_DO_SYNC_NEGO)
|
|
&& (pDCB->SyncMode & SYNC_NEGO_ENABLE)) {
|
|
/*
|
|
* SYNCHRONOUS DATA TRANSFER REQUEST code (01h)
|
|
*/
|
|
if (!(pDCB->SyncMode & WIDE_NEGO_DONE))
|
|
trm_reg_write8((pDCB->IdentifyMsg & 0xBF),
|
|
TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO);
|
|
/* (01h) */
|
|
trm_reg_write8(3,TRMREG_SCSI_FIFO);
|
|
/* Message length (03h) */
|
|
trm_reg_write8(1,TRMREG_SCSI_FIFO);
|
|
/* SYNCHRONOUS DATA TRANSFER REQUEST code (01h) */
|
|
trm_reg_write8(pDCB->MaxNegoPeriod,TRMREG_SCSI_FIFO);
|
|
/* Transfer peeriod factor */
|
|
trm_reg_write8(SYNC_NEGO_OFFSET,TRMREG_SCSI_FIFO);
|
|
/* REQ/ACK offset */
|
|
pSRB->SRBState |= SRB_DO_SYNC_NEGO;
|
|
}
|
|
}
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
static void
|
|
trm_CommandPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
}
|
|
|
|
static void
|
|
trm_CommandPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
PDCB pDCB;
|
|
u_int8_t * ptr;
|
|
u_int16_t i, cnt;
|
|
union ccb *pccb;
|
|
struct ccb_scsiio *pcsio;
|
|
|
|
pccb = pSRB->pccb;
|
|
pcsio = &pccb->csio;
|
|
|
|
trm_reg_write16(DO_CLRATN | DO_CLRFIFO , TRMREG_SCSI_CONTROL);
|
|
if (!(pSRB->SRBFlag & AUTO_REQSENSE)) {
|
|
cnt = (u_int16_t) pSRB->ScsiCmdLen;
|
|
ptr = (u_int8_t *) pSRB->CmdBlock;
|
|
for (i = 0; i < cnt; i++) {
|
|
trm_reg_write8(*ptr, TRMREG_SCSI_FIFO);
|
|
ptr++;
|
|
}
|
|
} else {
|
|
trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO);
|
|
pDCB = pACB->pActiveDCB;
|
|
/* target id */
|
|
trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
/* sizeof(struct scsi_sense_data) */
|
|
trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO);
|
|
trm_reg_write8(0, TRMREG_SCSI_FIFO);
|
|
}
|
|
pSRB->SRBState = SRB_COMMAND;
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop*/
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
static void
|
|
trm_DataOutPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
PDCB pDCB;
|
|
u_int8_t TempDMAstatus,SGIndexTemp;
|
|
u_int16_t scsi_status;
|
|
PSEG pseg;
|
|
u_long TempSRBXferredLength,dLeftCounter=0;
|
|
|
|
pDCB = pSRB->pSRBDCB;
|
|
scsi_status = *pscsi_status;
|
|
|
|
if (!(pSRB->SRBState & SRB_XFERPAD)) {
|
|
if (scsi_status & PARITYERROR)
|
|
pSRB->SRBStatus |= PARITY_ERROR;
|
|
if (!(scsi_status & SCSIXFERDONE)) {
|
|
/*
|
|
* when data transfer from DMA FIFO to SCSI FIFO
|
|
* if there was some data left in SCSI FIFO
|
|
*/
|
|
dLeftCounter = (u_long)
|
|
(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x1F);
|
|
if (pDCB->SyncPeriod & WIDE_SYNC) {
|
|
/*
|
|
* if WIDE scsi SCSI FIFOCNT unit is word
|
|
* so need to * 2
|
|
*/
|
|
dLeftCounter <<= 1;
|
|
}
|
|
}
|
|
/*
|
|
* caculate all the residue data that not yet tranfered
|
|
* SCSI transfer counter + left in SCSI FIFO data
|
|
*
|
|
* .....TRM_SCSI_COUNTER (24bits)
|
|
* The counter always decrement by one for every SCSI byte
|
|
*transfer.
|
|
* .....TRM_SCSI_FIFOCNT (5bits)
|
|
* The counter is SCSI FIFO offset counter
|
|
*/
|
|
dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER);
|
|
if (dLeftCounter == 1) {
|
|
dLeftCounter = 0;
|
|
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
|
|
}
|
|
if ((dLeftCounter == 0) ||
|
|
(scsi_status & SCSIXFERCNT_2_ZERO)) {
|
|
TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS);
|
|
while (!(TempDMAstatus & DMAXFERCOMP)) {
|
|
TempDMAstatus =
|
|
trm_reg_read8(TRMREG_DMA_STATUS);
|
|
}
|
|
pSRB->SRBTotalXferLength = 0;
|
|
} else {
|
|
/* Update SG list */
|
|
/*
|
|
* if transfer not yet complete
|
|
* there were some data residue in SCSI FIFO or
|
|
* SCSI transfer counter not empty
|
|
*/
|
|
if (pSRB->SRBTotalXferLength != dLeftCounter) {
|
|
/*
|
|
* data that had transferred length
|
|
*/
|
|
TempSRBXferredLength =
|
|
pSRB->SRBTotalXferLength - dLeftCounter;
|
|
/*
|
|
* next time to be transferred length
|
|
*/
|
|
pSRB->SRBTotalXferLength = dLeftCounter;
|
|
/*
|
|
* parsing from last time disconnect SRBSGIndex
|
|
*/
|
|
pseg =
|
|
pSRB->SRBSGListPointer + pSRB->SRBSGIndex;
|
|
for (SGIndexTemp = pSRB->SRBSGIndex;
|
|
SGIndexTemp < pSRB->SRBSGCount;
|
|
SGIndexTemp++) {
|
|
/*
|
|
* find last time which SG transfer be
|
|
* disconnect
|
|
*/
|
|
if (TempSRBXferredLength >=
|
|
pseg->length)
|
|
TempSRBXferredLength -=
|
|
pseg->length;
|
|
else {
|
|
/*
|
|
* update last time disconnected SG
|
|
* list
|
|
*/
|
|
pseg->length -=
|
|
TempSRBXferredLength;
|
|
/* residue data length */
|
|
pseg->address +=
|
|
TempSRBXferredLength;
|
|
/* residue data pointer */
|
|
pSRB->SRBSGIndex = SGIndexTemp;
|
|
break;
|
|
}
|
|
pseg++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
trm_reg_write8(STOPDMAXFER ,TRMREG_DMA_CONTROL);
|
|
}
|
|
|
|
|
|
static void
|
|
trm_DataOutPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
u_int16_t ioDir;
|
|
/*
|
|
* do prepare befor transfer when data out phase
|
|
*/
|
|
|
|
ioDir = XFERDATAOUT;
|
|
trm_DataIO_transfer(pACB, pSRB, ioDir);
|
|
}
|
|
|
|
static void
|
|
trm_DataInPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
u_int8_t bval,SGIndexTemp;
|
|
u_int16_t scsi_status;
|
|
PSEG pseg;
|
|
u_long TempSRBXferredLength,dLeftCounter = 0;
|
|
|
|
scsi_status = *pscsi_status;
|
|
if (!(pSRB->SRBState & SRB_XFERPAD)) {
|
|
if (scsi_status & PARITYERROR)
|
|
pSRB->SRBStatus |= PARITY_ERROR;
|
|
dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER);
|
|
if ((dLeftCounter == 0) || (scsi_status & SCSIXFERCNT_2_ZERO)) {
|
|
bval = trm_reg_read8(TRMREG_DMA_STATUS);
|
|
while (!(bval & DMAXFERCOMP))
|
|
bval = trm_reg_read8(TRMREG_DMA_STATUS);
|
|
pSRB->SRBTotalXferLength = 0;
|
|
} else {
|
|
/*
|
|
* parsing the case:
|
|
* when a transfer not yet complete
|
|
* but be disconnected by uper layer
|
|
* if transfer not yet complete
|
|
* there were some data residue in SCSI FIFO or
|
|
* SCSI transfer counter not empty
|
|
*/
|
|
if (pSRB->SRBTotalXferLength != dLeftCounter) {
|
|
/*
|
|
* data that had transferred length
|
|
*/
|
|
TempSRBXferredLength =
|
|
pSRB->SRBTotalXferLength - dLeftCounter;
|
|
/*
|
|
* next time to be transferred length
|
|
*/
|
|
pSRB->SRBTotalXferLength = dLeftCounter;
|
|
/*
|
|
* parsing from last time disconnect SRBSGIndex
|
|
*/
|
|
pseg = pSRB->SRBSGListPointer + pSRB->SRBSGIndex;
|
|
for (SGIndexTemp = pSRB->SRBSGIndex;
|
|
SGIndexTemp < pSRB->SRBSGCount;
|
|
SGIndexTemp++) {
|
|
/*
|
|
* find last time which SG transfer be disconnect
|
|
*/
|
|
if (TempSRBXferredLength >= pseg->length)
|
|
TempSRBXferredLength -= pseg->length;
|
|
else {
|
|
/*
|
|
* update last time disconnected SG list
|
|
*/
|
|
pseg->length -= TempSRBXferredLength;
|
|
/* residue data length */
|
|
pseg->address += TempSRBXferredLength;
|
|
/* residue data pointer */
|
|
pSRB->SRBSGIndex = SGIndexTemp;
|
|
break;
|
|
}
|
|
pseg++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
trm_DataInPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
u_int16_t ioDir;
|
|
/*
|
|
* do prepare befor transfer when data in phase
|
|
*/
|
|
|
|
ioDir = XFERDATAIN;
|
|
trm_DataIO_transfer(pACB, pSRB, ioDir);
|
|
}
|
|
|
|
static void
|
|
trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir)
|
|
{
|
|
u_int8_t bval;
|
|
PDCB pDCB;
|
|
|
|
pDCB = pSRB->pSRBDCB;
|
|
if (pSRB->SRBSGIndex < pSRB->SRBSGCount) {
|
|
if (pSRB->SRBTotalXferLength != 0) {
|
|
pSRB->SRBSGPhyAddr = vtophys(pSRB->SRBSGListPointer);
|
|
/*
|
|
* load what physical address of Scatter/Gather list
|
|
table want to be transfer
|
|
*/
|
|
pSRB->SRBState = SRB_DATA_XFER;
|
|
trm_reg_write32(0, TRMREG_DMA_XHIGHADDR);
|
|
trm_reg_write32(
|
|
(pSRB->SRBSGPhyAddr +
|
|
((u_long)pSRB->SRBSGIndex << 3)),
|
|
TRMREG_DMA_XLOWADDR);
|
|
/*
|
|
* load how many bytes in the Scatter/Gather
|
|
* list table
|
|
*/
|
|
trm_reg_write32(
|
|
((u_long)(pSRB->SRBSGCount - pSRB->SRBSGIndex) << 3),
|
|
TRMREG_DMA_XCNT);
|
|
/*
|
|
* load total transfer length (24bits) max value
|
|
* 16Mbyte
|
|
*/
|
|
trm_reg_write32(pSRB->SRBTotalXferLength,
|
|
TRMREG_SCSI_COUNTER);
|
|
/* Start DMA transfer */
|
|
trm_reg_write16(ioDir, TRMREG_DMA_COMMAND);
|
|
/* Start SCSI transfer */
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
bval = (ioDir == XFERDATAOUT) ?
|
|
SCMD_DMA_OUT : SCMD_DMA_IN;
|
|
trm_reg_write8(bval, TRMREG_SCSI_COMMAND);
|
|
} else {
|
|
/* xfer pad */
|
|
if (pSRB->SRBSGCount) {
|
|
pSRB->AdaptStatus = H_OVER_UNDER_RUN;
|
|
pSRB->SRBStatus |= OVER_RUN;
|
|
}
|
|
if (pDCB->SyncPeriod & WIDE_SYNC)
|
|
trm_reg_write32(2,TRMREG_SCSI_COUNTER);
|
|
else
|
|
trm_reg_write32(1,TRMREG_SCSI_COUNTER);
|
|
if (ioDir == XFERDATAOUT)
|
|
trm_reg_write16(0, TRMREG_SCSI_FIFO);
|
|
else
|
|
trm_reg_read16(TRMREG_SCSI_FIFO);
|
|
pSRB->SRBState |= SRB_XFERPAD;
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
bval = (ioDir == XFERDATAOUT) ?
|
|
SCMD_FIFO_OUT : SCMD_FIFO_IN;
|
|
trm_reg_write8(bval, TRMREG_SCSI_COMMAND);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
trm_StatusPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
pSRB->TargetStatus = trm_reg_read8(TRMREG_SCSI_FIFO);
|
|
pSRB->SRBState = SRB_COMPLETED;
|
|
*pscsi_status = PH_BUS_FREE;
|
|
/*.. initial phase*/
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
trm_StatusPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
if (trm_reg_read16(TRMREG_DMA_COMMAND) & 0x0001) {
|
|
if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40))
|
|
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
|
|
if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000))
|
|
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
|
|
} else {
|
|
if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000))
|
|
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
|
|
if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40))
|
|
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
|
|
}
|
|
pSRB->SRBState = SRB_STATUS;
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_COMP, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
/*
|
|
*scsiiom
|
|
* trm_MsgInPhase0: one of trm_SCSI_phase0[] vectors
|
|
* stateV = (void *) trm_SCSI_phase0[phase]
|
|
* if phase =7
|
|
* extended message codes:
|
|
*
|
|
* code description
|
|
*
|
|
* 02h Reserved
|
|
* 00h MODIFY DATA POINTER
|
|
* 01h SYNCHRONOUS DATA TRANSFER REQUEST
|
|
* 03h WIDE DATA TRANSFER REQUEST
|
|
* 04h - 7Fh Reserved
|
|
* 80h - FFh Vendor specific
|
|
*
|
|
*/
|
|
|
|
static void
|
|
trm_MsgInPhase0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
u_int8_t message_in_code,bIndex,message_in_tag_id;
|
|
PDCB pDCB;
|
|
PSRB pSRBTemp;
|
|
|
|
pDCB = pACB->pActiveDCB;
|
|
|
|
message_in_code = trm_reg_read8(TRMREG_SCSI_FIFO);
|
|
if (!(pSRB->SRBState & SRB_EXTEND_MSGIN)) {
|
|
if (message_in_code == MSG_DISCONNECT) {
|
|
pSRB->SRBState = SRB_DISCONNECT;
|
|
goto min6;
|
|
} else if (message_in_code == MSG_SAVE_PTR) {
|
|
goto min6;
|
|
} else if ((message_in_code == MSG_EXTENDED) ||
|
|
((message_in_code >= MSG_SIMPLE_QTAG) &&
|
|
(message_in_code <= MSG_ORDER_QTAG))) {
|
|
pSRB->SRBState |= SRB_EXTEND_MSGIN;
|
|
pSRB->MsgInBuf[0] = message_in_code;
|
|
/* extended message (01h) */
|
|
pSRB->MsgCnt = 1;
|
|
pSRB->pMsgPtr = &pSRB->MsgInBuf[1];
|
|
/* extended message length (n) */
|
|
goto min6;
|
|
} else if (message_in_code == MSG_REJECT_) {
|
|
/* Reject message */
|
|
if (pDCB->SyncMode & WIDE_NEGO_ENABLE) {
|
|
/* do wide nego reject */
|
|
pDCB = pSRB->pSRBDCB;
|
|
pDCB->SyncMode |= WIDE_NEGO_DONE;
|
|
pDCB->SyncMode &= ~(SYNC_NEGO_DONE |
|
|
EN_ATN_STOP | WIDE_NEGO_ENABLE);
|
|
pSRB->SRBState &= ~(SRB_DO_WIDE_NEGO+SRB_MSGIN);
|
|
if ((pDCB->SyncMode & SYNC_NEGO_ENABLE)
|
|
&& !(pDCB->SyncMode & SYNC_NEGO_DONE)) {
|
|
/* Set ATN, in case ATN was clear */
|
|
pSRB->SRBState |= SRB_MSGOUT;
|
|
trm_reg_write16(
|
|
DO_SETATN,
|
|
TRMREG_SCSI_CONTROL);
|
|
} else {
|
|
/* Clear ATN */
|
|
trm_reg_write16(
|
|
DO_CLRATN,
|
|
TRMREG_SCSI_CONTROL);
|
|
}
|
|
} else if (pDCB->SyncMode & SYNC_NEGO_ENABLE) {
|
|
/* do sync nego reject */
|
|
trm_reg_write16(DO_CLRATN,TRMREG_SCSI_CONTROL);
|
|
if (pSRB->SRBState & SRB_DO_SYNC_NEGO) {
|
|
pDCB = pSRB->pSRBDCB;
|
|
pDCB->SyncMode &=
|
|
~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE);
|
|
pDCB->SyncPeriod = 0;
|
|
pDCB->SyncOffset = 0;
|
|
goto re_prog;
|
|
}
|
|
}
|
|
goto min6;
|
|
} else if (message_in_code == MSG_IGNOREWIDE) {
|
|
trm_reg_write32(1, TRMREG_SCSI_COUNTER);
|
|
trm_reg_read8(TRMREG_SCSI_FIFO);
|
|
goto min6;
|
|
} else {
|
|
/* Restore data pointer message */
|
|
/* Save data pointer message */
|
|
/* Completion message */
|
|
/* NOP message */
|
|
goto min6;
|
|
}
|
|
} else {
|
|
/*
|
|
* Parsing incomming extented messages
|
|
*/
|
|
*pSRB->pMsgPtr = message_in_code;
|
|
pSRB->MsgCnt++;
|
|
pSRB->pMsgPtr++;
|
|
TRM_DPRINTF("pSRB->MsgInBuf[0]=%2x \n ",pSRB->MsgInBuf[0]);
|
|
TRM_DPRINTF("pSRB->MsgInBuf[1]=%2x \n ",pSRB->MsgInBuf[1]);
|
|
TRM_DPRINTF("pSRB->MsgInBuf[2]=%2x \n ",pSRB->MsgInBuf[2]);
|
|
TRM_DPRINTF("pSRB->MsgInBuf[3]=%2x \n ",pSRB->MsgInBuf[3]);
|
|
TRM_DPRINTF("pSRB->MsgInBuf[4]=%2x \n ",pSRB->MsgInBuf[4]);
|
|
if ((pSRB->MsgInBuf[0] >= MSG_SIMPLE_QTAG)
|
|
&& (pSRB->MsgInBuf[0] <= MSG_ORDER_QTAG)) {
|
|
/*
|
|
* is QUEUE tag message :
|
|
*
|
|
* byte 0:
|
|
* HEAD QUEUE TAG (20h)
|
|
* ORDERED QUEUE TAG (21h)
|
|
* SIMPLE QUEUE TAG (22h)
|
|
* byte 1:
|
|
* Queue tag (00h - FFh)
|
|
*/
|
|
if (pSRB->MsgCnt == 2) {
|
|
pSRB->SRBState = 0;
|
|
message_in_tag_id = pSRB->MsgInBuf[1];
|
|
pSRB = pDCB->pGoingSRB;
|
|
pSRBTemp = pDCB->pGoingLastSRB;
|
|
if (pSRB) {
|
|
for (;;) {
|
|
if (pSRB->TagNumber !=
|
|
message_in_tag_id) {
|
|
if (pSRB == pSRBTemp) {
|
|
goto mingx0;
|
|
}
|
|
pSRB = pSRB->pNextSRB;
|
|
} else
|
|
break;
|
|
}
|
|
if (pDCB->DCBFlag & ABORT_DEV_) {
|
|
pSRB->SRBState = SRB_ABORT_SENT;
|
|
trm_EnableMsgOutAbort1(
|
|
pACB, pSRB);
|
|
}
|
|
if (!(pSRB->SRBState & SRB_DISCONNECT))
|
|
goto mingx0;
|
|
pDCB->pActiveSRB = pSRB;
|
|
pSRB->SRBState = SRB_DATA_XFER;
|
|
} else {
|
|
mingx0:
|
|
pSRB = pACB->pTmpSRB;
|
|
pSRB->SRBState = SRB_UNEXPECT_RESEL;
|
|
pDCB->pActiveSRB = pSRB;
|
|
pSRB->MsgOutBuf[0] = MSG_ABORT_TAG;
|
|
trm_EnableMsgOutAbort2(
|
|
pACB,
|
|
pSRB);
|
|
}
|
|
}
|
|
} else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) &&
|
|
(pSRB->MsgInBuf[2] == 3) && (pSRB->MsgCnt == 4)) {
|
|
/*
|
|
* is Wide data xfer Extended message :
|
|
* ======================================
|
|
* WIDE DATA TRANSFER REQUEST
|
|
* ======================================
|
|
* byte 0 : Extended message (01h)
|
|
* byte 1 : Extended message length (02h)
|
|
* byte 2 : WIDE DATA TRANSFER code (03h)
|
|
* byte 3 : Transfer width exponent
|
|
*/
|
|
pDCB = pSRB->pSRBDCB;
|
|
pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_WIDE_NEGO);
|
|
if ((pSRB->MsgInBuf[1] != 2)) {
|
|
/* Length is wrong, reject it */
|
|
pDCB->SyncMode &=
|
|
~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE);
|
|
pSRB->MsgCnt = 1;
|
|
pSRB->MsgInBuf[0] = MSG_REJECT_;
|
|
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
|
|
goto min6;
|
|
}
|
|
if (pDCB->SyncMode & WIDE_NEGO_ENABLE) {
|
|
/* Do wide negoniation */
|
|
if (pSRB->MsgInBuf[3] > 2) {
|
|
/* > 32 bit */
|
|
/* reject_msg: */
|
|
pDCB->SyncMode &=
|
|
~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE);
|
|
pSRB->MsgCnt = 1;
|
|
pSRB->MsgInBuf[0] = MSG_REJECT_;
|
|
trm_reg_write16(DO_SETATN,
|
|
TRMREG_SCSI_CONTROL);
|
|
goto min6;
|
|
}
|
|
if (pSRB->MsgInBuf[3] == 2) {
|
|
pSRB->MsgInBuf[3] = 1;
|
|
/* do 16 bits */
|
|
} else {
|
|
if (!(pDCB->SyncMode
|
|
& WIDE_NEGO_DONE)) {
|
|
pSRB->SRBState &=
|
|
~(SRB_DO_WIDE_NEGO+SRB_MSGIN);
|
|
pDCB->SyncMode |=
|
|
WIDE_NEGO_DONE;
|
|
pDCB->SyncMode &=
|
|
~(SYNC_NEGO_DONE |
|
|
EN_ATN_STOP |
|
|
WIDE_NEGO_ENABLE);
|
|
if (pSRB->MsgInBuf[3] != 0) {
|
|
/* is Wide data xfer */
|
|
pDCB->SyncPeriod |=
|
|
WIDE_SYNC;
|
|
pDCB->tinfo.current.width
|
|
= MSG_EXT_WDTR_BUS_16_BIT;
|
|
pDCB->tinfo.goal.width
|
|
= MSG_EXT_WDTR_BUS_16_BIT;
|
|
}
|
|
}
|
|
}
|
|
} else
|
|
pSRB->MsgInBuf[3] = 0;
|
|
pSRB->SRBState |= SRB_MSGOUT;
|
|
trm_reg_write16(DO_SETATN,TRMREG_SCSI_CONTROL);
|
|
goto min6;
|
|
} else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) &&
|
|
(pSRB->MsgInBuf[2] == 1) && (pSRB->MsgCnt == 5)) {
|
|
/*
|
|
* is 8bit transfer Extended message :
|
|
* =================================
|
|
* SYNCHRONOUS DATA TRANSFER REQUEST
|
|
* =================================
|
|
* byte 0 : Extended message (01h)
|
|
* byte 1 : Extended message length (03)
|
|
* byte 2 : SYNCHRONOUS DATA TRANSFER code (01h)
|
|
* byte 3 : Transfer period factor
|
|
* byte 4 : REQ/ACK offset
|
|
*/
|
|
pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_SYNC_NEGO);
|
|
if ((pSRB->MsgInBuf[1] != 3) ||
|
|
(pSRB->MsgInBuf[2] != 1)) {
|
|
/* reject_msg: */
|
|
pSRB->MsgCnt = 1;
|
|
pSRB->MsgInBuf[0] = MSG_REJECT_;
|
|
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
|
|
} else if (!(pSRB->MsgInBuf[3]) || !(pSRB->MsgInBuf[4])) {
|
|
/* set async */
|
|
pDCB = pSRB->pSRBDCB;
|
|
/* disable sync & sync nego */
|
|
pDCB->SyncMode &=
|
|
~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE);
|
|
pDCB->SyncPeriod = 0;
|
|
pDCB->SyncOffset = 0;
|
|
pDCB->tinfo.goal.period = 0;
|
|
pDCB->tinfo.goal.offset = 0;
|
|
pDCB->tinfo.current.period = 0;
|
|
pDCB->tinfo.current.offset = 0;
|
|
pDCB->tinfo.current.width =
|
|
MSG_EXT_WDTR_BUS_8_BIT;
|
|
goto re_prog;
|
|
} else {
|
|
/* set sync */
|
|
pDCB = pSRB->pSRBDCB;
|
|
pDCB->SyncMode |=
|
|
SYNC_NEGO_ENABLE+SYNC_NEGO_DONE;
|
|
pDCB->MaxNegoPeriod = pSRB->MsgInBuf[3];
|
|
/* Transfer period factor */
|
|
pDCB->SyncOffset = pSRB->MsgInBuf[4];
|
|
/* REQ/ACK offset */
|
|
for (bIndex = 0; bIndex < 7; bIndex++) {
|
|
if (pSRB->MsgInBuf[3] <=
|
|
dc395x_trm_clock_period[bIndex]) {
|
|
break;
|
|
}
|
|
}
|
|
pDCB->tinfo.goal.period =
|
|
dc395x_trm_tinfo_sync_period[bIndex];
|
|
pDCB->tinfo.current.period =
|
|
dc395x_trm_tinfo_sync_period[bIndex];
|
|
pDCB->tinfo.goal.offset = pDCB->SyncOffset;
|
|
pDCB->tinfo.current.offset = pDCB->SyncOffset;
|
|
pDCB->SyncPeriod |= (bIndex | ALT_SYNC);
|
|
re_prog:
|
|
/*
|
|
*
|
|
* program SCSI control register
|
|
*
|
|
*/
|
|
trm_reg_write8(pDCB->SyncPeriod,
|
|
TRMREG_SCSI_SYNC);
|
|
trm_reg_write8(pDCB->SyncOffset,
|
|
TRMREG_SCSI_OFFSET);
|
|
trm_SetXferRate(pACB,pSRB,pDCB);
|
|
}
|
|
}
|
|
}
|
|
min6:
|
|
*pscsi_status = PH_BUS_FREE;
|
|
/* .. initial phase */
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop */
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
static void
|
|
trm_MsgInPhase1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
|
|
trm_reg_write32(1,TRMREG_SCSI_COUNTER);
|
|
if (!(pSRB->SRBState & SRB_MSGIN)) {
|
|
pSRB->SRBState &= SRB_DISCONNECT;
|
|
pSRB->SRBState |= SRB_MSGIN;
|
|
}
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop*/
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_FIFO_IN, TRMREG_SCSI_COMMAND);
|
|
}
|
|
|
|
static void
|
|
trm_Nop0(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
}
|
|
|
|
static void
|
|
trm_Nop1(PACB pACB, PSRB pSRB, u_int8_t *pscsi_status)
|
|
{
|
|
|
|
}
|
|
|
|
static void
|
|
trm_SetXferRate(PACB pACB,PSRB pSRB, PDCB pDCB)
|
|
{
|
|
u_int16_t cnt, i;
|
|
u_int8_t bval;
|
|
PDCB pDCBTemp;
|
|
u_int target_id,target_lun;
|
|
|
|
/*
|
|
* set all lun device's period , offset
|
|
*/
|
|
target_id = pSRB->pccb->ccb_h.target_id;
|
|
target_lun = pSRB->pccb->ccb_h.target_lun;
|
|
TRM_DPRINTF("trm_SetXferRate:target_id= %d ,target_lun= %d \n"
|
|
,target_id,target_lun);
|
|
if (!(pDCB->IdentifyMsg & 0x07)) {
|
|
if (!pACB->scan_devices[target_id][target_lun]) {
|
|
pDCBTemp = pACB->pLinkDCB;
|
|
cnt = pACB->DeviceCnt;
|
|
bval = pDCB->TargetID;
|
|
for (i = 0; i < cnt; i++) {
|
|
if (pDCBTemp->TargetID == bval) {
|
|
pDCBTemp->SyncPeriod = pDCB->SyncPeriod;
|
|
pDCBTemp->SyncOffset = pDCB->SyncOffset;
|
|
pDCBTemp->SyncMode = pDCB->SyncMode;
|
|
}
|
|
pDCBTemp = pDCBTemp->pNextDCB;
|
|
}
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* scsiiom
|
|
* trm_Interrupt
|
|
*
|
|
*
|
|
* ---SCSI bus phase
|
|
*
|
|
* PH_DATA_OUT 0x00 Data out phase
|
|
* PH_DATA_IN 0x01 Data in phase
|
|
* PH_COMMAND 0x02 Command phase
|
|
* PH_STATUS 0x03 Status phase
|
|
* PH_BUS_FREE 0x04 Invalid phase used as bus free
|
|
* PH_BUS_FREE 0x05 Invalid phase used as bus free
|
|
* PH_MSG_OUT 0x06 Message out phase
|
|
* PH_MSG_IN 0x07 Message in phase
|
|
*
|
|
*/
|
|
static void
|
|
trm_Disconnect(PACB pACB)
|
|
{
|
|
PDCB pDCB;
|
|
PSRB pSRB, psrb;
|
|
int intflag;
|
|
u_int16_t i,j, cnt;
|
|
u_int8_t bval;
|
|
u_int target_id,target_lun;
|
|
|
|
TRM_DPRINTF("trm_Disconnect...............\n ");
|
|
|
|
intflag = splcam();
|
|
pDCB = pACB->pActiveDCB;
|
|
if (!pDCB) {
|
|
TRM_DPRINTF(" Exception Disconnect DCB=NULL..............\n ");
|
|
j = 400;
|
|
while (--j)
|
|
DELAY(1);
|
|
/* 1 msec */
|
|
trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT),
|
|
TRMREG_SCSI_CONTROL);
|
|
return;
|
|
}
|
|
pSRB = pDCB->pActiveSRB;
|
|
/* bug pSRB=0 */
|
|
target_id = pSRB->pccb->ccb_h.target_id;
|
|
target_lun = pSRB->pccb->ccb_h.target_lun;
|
|
TRM_DPRINTF(":pDCB->pActiveSRB= %8x \n ",(u_int) pDCB->pActiveSRB);
|
|
pACB->pActiveDCB = 0;
|
|
pSRB->ScsiPhase = PH_BUS_FREE;
|
|
/* SCSI bus free Phase */
|
|
trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT), TRMREG_SCSI_CONTROL);
|
|
if (pSRB->SRBState & SRB_UNEXPECT_RESEL) {
|
|
pSRB->SRBState = 0;
|
|
trm_DoWaitingSRB(pACB);
|
|
} else if (pSRB->SRBState & SRB_ABORT_SENT) {
|
|
pDCB->TagMask = 0;
|
|
pDCB->DCBFlag = 0;
|
|
cnt = pDCB->GoingSRBCnt;
|
|
pDCB->GoingSRBCnt = 0;
|
|
pSRB = pDCB->pGoingSRB;
|
|
for (i = 0; i < cnt; i++) {
|
|
psrb = pSRB->pNextSRB;
|
|
pSRB->pNextSRB = pACB->pFreeSRB;
|
|
pACB->pFreeSRB = pSRB;
|
|
pSRB = psrb;
|
|
}
|
|
pDCB->pGoingSRB = 0;
|
|
trm_DoWaitingSRB(pACB);
|
|
} else {
|
|
if ((pSRB->SRBState & (SRB_START_+SRB_MSGOUT)) ||
|
|
!(pSRB->SRBState & (SRB_DISCONNECT+SRB_COMPLETED))) {
|
|
/* Selection time out */
|
|
if (!(pACB->scan_devices[target_id][target_lun])) {
|
|
pSRB->SRBState = SRB_READY;
|
|
trm_RewaitSRB(pDCB, pSRB);
|
|
} else {
|
|
pSRB->TargetStatus = SCSI_STAT_SEL_TIMEOUT;
|
|
goto disc1;
|
|
}
|
|
} else if (pSRB->SRBState & SRB_DISCONNECT) {
|
|
/*
|
|
* SRB_DISCONNECT
|
|
*/
|
|
trm_DoWaitingSRB(pACB);
|
|
} else if (pSRB->SRBState & SRB_COMPLETED) {
|
|
disc1:
|
|
/*
|
|
* SRB_COMPLETED
|
|
*/
|
|
if (pDCB->MaxCommand > 1) {
|
|
bval = pSRB->TagNumber;
|
|
pDCB->TagMask &= (~(1 << bval));
|
|
/* free tag mask */
|
|
}
|
|
pDCB->pActiveSRB = 0;
|
|
pSRB->SRBState = SRB_FREE;
|
|
trm_SRBdone(pACB, pDCB, pSRB);
|
|
}
|
|
}
|
|
splx(intflag);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
trm_Reselect(PACB pACB)
|
|
{
|
|
PDCB pDCB;
|
|
PSRB pSRB;
|
|
u_int16_t RselTarLunId;
|
|
|
|
TRM_DPRINTF("trm_Reselect................. \n");
|
|
pDCB = pACB->pActiveDCB;
|
|
if (pDCB) {
|
|
/* Arbitration lost but Reselection win */
|
|
pSRB = pDCB->pActiveSRB;
|
|
pSRB->SRBState = SRB_READY;
|
|
trm_RewaitSRB(pDCB, pSRB);
|
|
}
|
|
/* Read Reselected Target Id and LUN */
|
|
RselTarLunId = trm_reg_read16(TRMREG_SCSI_TARGETID) & 0x1FFF;
|
|
pDCB = pACB->pLinkDCB;
|
|
while (RselTarLunId != *((u_int16_t *) &pDCB->TargetID)) {
|
|
/* get pDCB of the reselect id */
|
|
pDCB = pDCB->pNextDCB;
|
|
}
|
|
|
|
pACB->pActiveDCB = pDCB;
|
|
if (pDCB->SyncMode & EN_TAG_QUEUING) {
|
|
pSRB = pACB->pTmpSRB;
|
|
pDCB->pActiveSRB = pSRB;
|
|
} else {
|
|
pSRB = pDCB->pActiveSRB;
|
|
if (!pSRB || !(pSRB->SRBState & SRB_DISCONNECT)) {
|
|
/*
|
|
* abort command
|
|
*/
|
|
pSRB = pACB->pTmpSRB;
|
|
pSRB->SRBState = SRB_UNEXPECT_RESEL;
|
|
pDCB->pActiveSRB = pSRB;
|
|
trm_EnableMsgOutAbort1(pACB, pSRB);
|
|
} else {
|
|
if (pDCB->DCBFlag & ABORT_DEV_) {
|
|
pSRB->SRBState = SRB_ABORT_SENT;
|
|
trm_EnableMsgOutAbort1(pACB, pSRB);
|
|
} else
|
|
pSRB->SRBState = SRB_DATA_XFER;
|
|
}
|
|
}
|
|
pSRB->ScsiPhase = PH_BUS_FREE;
|
|
/* SCSI bus free Phase */
|
|
/*
|
|
* Program HA ID, target ID, period and offset
|
|
*/
|
|
trm_reg_write8((u_int8_t) RselTarLunId,TRMREG_SCSI_TARGETID);
|
|
/* target ID */
|
|
trm_reg_write8(pACB->AdaptSCSIID,TRMREG_SCSI_HOSTID);
|
|
/* host ID */
|
|
trm_reg_write8(pDCB->SyncPeriod,TRMREG_SCSI_SYNC);
|
|
/* period */
|
|
trm_reg_write8(pDCB->SyncOffset,TRMREG_SCSI_OFFSET);
|
|
/* offset */
|
|
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
|
|
/* it's important for atn stop*/
|
|
/*
|
|
* SCSI cammand
|
|
*/
|
|
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
|
|
/* to rls the /ACK signal */
|
|
}
|
|
|
|
static void
|
|
trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB)
|
|
{
|
|
PSRB psrb;
|
|
u_int8_t bval, bval1,status;
|
|
union ccb *pccb;
|
|
struct ccb_scsiio *pcsio;
|
|
PSCSI_INQDATA ptr;
|
|
int intflag;
|
|
u_int target_id,target_lun;
|
|
PDCB pTempDCB;
|
|
|
|
pccb = pSRB->pccb;
|
|
if (pccb == NULL)
|
|
return;
|
|
pcsio = &pccb->csio;
|
|
target_id = pSRB->pccb->ccb_h.target_id;
|
|
target_lun = pSRB->pccb->ccb_h.target_lun;
|
|
if ((pccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
|
|
bus_dmasync_op_t op;
|
|
if ((pccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
|
|
op = BUS_DMASYNC_POSTREAD;
|
|
else
|
|
op = BUS_DMASYNC_POSTWRITE;
|
|
bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op);
|
|
bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap);
|
|
}
|
|
/*
|
|
*
|
|
* target status
|
|
*
|
|
*/
|
|
status = pSRB->TargetStatus;
|
|
pcsio->scsi_status=SCSI_STAT_GOOD;
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
if (pSRB->SRBFlag & AUTO_REQSENSE) {
|
|
/*
|
|
* status of auto request sense
|
|
*/
|
|
pSRB->SRBFlag &= ~AUTO_REQSENSE;
|
|
pSRB->AdaptStatus = 0;
|
|
pSRB->TargetStatus = SCSI_STATUS_CHECK_COND;
|
|
|
|
if (status == SCSI_STATUS_CHECK_COND) {
|
|
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
goto ckc_e;
|
|
}
|
|
*((u_long *) &(pSRB->CmdBlock[0])) = pSRB->Segment0[0];
|
|
*((u_long *) &(pSRB->CmdBlock[4])) = pSRB->Segment0[1];
|
|
pSRB->SRBTotalXferLength = pSRB->Segment1[1];
|
|
pSRB->SegmentX[0].address = pSRB->SgSenseTemp.address;
|
|
pSRB->SegmentX[0].length = pSRB->SgSenseTemp.length;
|
|
pcsio->scsi_status = SCSI_STATUS_CHECK_COND;
|
|
pccb->ccb_h.status = CAM_AUTOSNS_VALID;
|
|
goto ckc_e;
|
|
}
|
|
/*
|
|
* target status
|
|
*/
|
|
if (status) {
|
|
if (status == SCSI_STATUS_CHECK_COND) {
|
|
if ((pcsio->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0) {
|
|
TRM_DPRINTF("trm_RequestSense..................\n");
|
|
trm_RequestSense(pACB, pDCB, pSRB);
|
|
return;
|
|
}
|
|
pcsio->scsi_status = SCSI_STATUS_CHECK_COND;
|
|
pccb->ccb_h.status = CAM_AUTOSNS_VALID |
|
|
CAM_SCSI_STATUS_ERROR;
|
|
goto ckc_e;
|
|
} else if (status == SCSI_STAT_QUEUEFULL) {
|
|
bval = (u_int8_t) pDCB->GoingSRBCnt;
|
|
bval--;
|
|
pDCB->MaxCommand = bval;
|
|
trm_RewaitSRB(pDCB, pSRB);
|
|
pSRB->AdaptStatus = 0;
|
|
pSRB->TargetStatus = 0;
|
|
pcsio->scsi_status = SCSI_STAT_QUEUEFULL;
|
|
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
|
|
goto ckc_e;
|
|
} else if (status == SCSI_STAT_SEL_TIMEOUT) {
|
|
pSRB->AdaptStatus = H_SEL_TIMEOUT;
|
|
pSRB->TargetStatus = 0;
|
|
pcsio->scsi_status = SCSI_STAT_SEL_TIMEOUT;
|
|
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
} else if (status == SCSI_STAT_BUSY) {
|
|
TRM_DPRINTF("trm: target busy at %s %d\n",
|
|
__FILE__, __LINE__);
|
|
pcsio->scsi_status = SCSI_STAT_BUSY;
|
|
pccb->ccb_h.status = CAM_SCSI_BUSY;
|
|
/* The device busy, try again later? */
|
|
} else if (status == SCSI_STAT_RESCONFLICT) {
|
|
TRM_DPRINTF("trm: target reserved at %s %d\n",
|
|
__FILE__, __LINE__);
|
|
pcsio->scsi_status = SCSI_STAT_RESCONFLICT;
|
|
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; /*XXX*/
|
|
} else {
|
|
pSRB->AdaptStatus = 0;
|
|
if (pSRB->RetryCnt) {
|
|
pSRB->RetryCnt--;
|
|
pSRB->TargetStatus = 0;
|
|
pSRB->SRBSGIndex = 0;
|
|
pSRB->SRBSGListPointer = (PSEG)
|
|
&pSRB->SegmentX[0];
|
|
if (trm_StartSCSI(pACB, pDCB, pSRB)) {
|
|
/*
|
|
* If trm_StartSCSI return 1 :
|
|
* current interrupt status is interrupt
|
|
* disreenable
|
|
* It's said that SCSI processor has more
|
|
* one SRB need to do
|
|
*/
|
|
trm_RewaitSRB(pDCB, pSRB);
|
|
}
|
|
return;
|
|
} else {
|
|
TRM_DPRINTF("trm: driver stuffup at %s %d\n",
|
|
__FILE__, __LINE__);
|
|
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* process initiator status..........................
|
|
* Adapter (initiator) status
|
|
*/
|
|
status = pSRB->AdaptStatus;
|
|
if (status & H_OVER_UNDER_RUN) {
|
|
pSRB->TargetStatus = 0;
|
|
pccb->ccb_h.status = CAM_DATA_RUN_ERR;
|
|
/* Illegal length (over/under run) */
|
|
} else if (pSRB->SRBStatus & PARITY_ERROR) {
|
|
TRM_DPRINTF("trm: driver stuffup %s %d\n",
|
|
__FILE__, __LINE__);
|
|
pDCB->tinfo.goal.period = 0;
|
|
pDCB->tinfo.goal.offset = 0;
|
|
/* Driver failed to perform operation */
|
|
pccb->ccb_h.status = CAM_UNCOR_PARITY;
|
|
} else {
|
|
/* no error */
|
|
pSRB->AdaptStatus = 0;
|
|
pSRB->TargetStatus = 0;
|
|
pccb->ccb_h.status = CAM_REQ_CMP;
|
|
/* there is no error, (sense is invalid) */
|
|
}
|
|
}
|
|
ckc_e:
|
|
if (pACB->scan_devices[target_id][target_lun]) {
|
|
/*
|
|
* if SCSI command in "scan devices" duty
|
|
*/
|
|
if (pSRB->CmdBlock[0] == TEST_UNIT_READY)
|
|
pACB->scan_devices[target_id][target_lun] = 0;
|
|
/* SCSI command phase :test unit ready */
|
|
else if (pSRB->CmdBlock[0] == INQUIRY) {
|
|
/*
|
|
* SCSI command phase :inquiry scsi device data
|
|
* (type,capacity,manufacture....
|
|
*/
|
|
if (pccb->ccb_h.status == CAM_SEL_TIMEOUT)
|
|
goto NO_DEV;
|
|
ptr = (PSCSI_INQDATA) pcsio->data_ptr;
|
|
/* page fault */
|
|
TRM_DPRINTF("trm_SRBdone..PSCSI_INQDATA:%2x \n",
|
|
ptr->DevType);
|
|
bval1 = ptr->DevType & SCSI_DEVTYPE;
|
|
if (bval1 == SCSI_NODEV) {
|
|
NO_DEV:
|
|
TRM_DPRINTF("trm_SRBdone NO Device:target_id= %d ,target_lun= %d \n",
|
|
target_id,
|
|
target_lun);
|
|
intflag = splcam();
|
|
pACB->scan_devices[target_id][target_lun] = 0;
|
|
/* no device set scan device flag =0*/
|
|
/* pDCB Q link */
|
|
/* move the head of DCB to tempDCB*/
|
|
pTempDCB=pACB->pLinkDCB;
|
|
/* search current DCB for pass link */
|
|
while (pTempDCB->pNextDCB != pDCB) {
|
|
pTempDCB = pTempDCB->pNextDCB;
|
|
}
|
|
/*
|
|
* when the current DCB found than connect
|
|
* current DCB tail
|
|
*/
|
|
/* to the DCB tail that before current DCB */
|
|
pTempDCB->pNextDCB = pDCB->pNextDCB;
|
|
/*
|
|
* if there was only one DCB ,connect his tail
|
|
* to his head
|
|
*/
|
|
if (pACB->pLinkDCB == pDCB)
|
|
pACB->pLinkDCB = pTempDCB->pNextDCB;
|
|
if (pACB->pDCBRunRobin == pDCB)
|
|
pACB->pDCBRunRobin = pTempDCB->pNextDCB;
|
|
pACB->DeviceCnt--;
|
|
if (pACB->DeviceCnt == 0) {
|
|
pACB->pLinkDCB = NULL;
|
|
pACB->pDCBRunRobin = NULL;
|
|
}
|
|
splx(intflag);
|
|
} else {
|
|
#ifdef trm_DEBUG1
|
|
int j;
|
|
for (j = 0; j < 28; j++) {
|
|
TRM_DPRINTF("ptr=%2x ",
|
|
((u_int8_t *)ptr)[j]);
|
|
}
|
|
#endif
|
|
pDCB->DevType = bval1;
|
|
if (bval1 == SCSI_DASD ||
|
|
bval1 == SCSI_OPTICAL) {
|
|
if ((((ptr->Vers & 0x07) >= 2) ||
|
|
((ptr->RDF & 0x0F) == 2)) &&
|
|
(ptr->Flags & SCSI_INQ_CMDQUEUE) &&
|
|
(pDCB->DevMode & TAG_QUEUING_) &&
|
|
(pDCB->DevMode & EN_DISCONNECT_)) {
|
|
if (pDCB->DevMode &
|
|
TAG_QUEUING_) {
|
|
pDCB->MaxCommand =
|
|
pACB->TagMaxNum;
|
|
pDCB->SyncMode |=
|
|
EN_TAG_QUEUING;
|
|
pDCB->TagMask = 0;
|
|
pDCB->tinfo.disc_tag |=
|
|
TRM_CUR_TAGENB;
|
|
} else {
|
|
pDCB->SyncMode |=
|
|
EN_ATN_STOP;
|
|
pDCB->tinfo.disc_tag &=
|
|
~TRM_CUR_TAGENB;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* pSRB->CmdBlock[0] == INQUIRY */
|
|
}
|
|
/* pACB->scan_devices[target_id][target_lun] */
|
|
}
|
|
intflag = splcam();
|
|
/* ReleaseSRB(pDCB, pSRB); */
|
|
if (pSRB == pDCB->pGoingSRB)
|
|
pDCB->pGoingSRB = pSRB->pNextSRB;
|
|
else {
|
|
psrb = pDCB->pGoingSRB;
|
|
while (psrb->pNextSRB != pSRB) {
|
|
psrb = psrb->pNextSRB;
|
|
}
|
|
psrb->pNextSRB = pSRB->pNextSRB;
|
|
if (pSRB == pDCB->pGoingLastSRB) {
|
|
pDCB->pGoingLastSRB = psrb;
|
|
}
|
|
}
|
|
pSRB->pNextSRB = pACB->pFreeSRB;
|
|
pACB->pFreeSRB = pSRB;
|
|
pDCB->GoingSRBCnt--;
|
|
trm_DoWaitingSRB(pACB);
|
|
|
|
splx(intflag);
|
|
/* Notify cmd done */
|
|
xpt_done (pccb);
|
|
}
|
|
|
|
static void
|
|
trm_DoingSRB_Done(PACB pACB)
|
|
{
|
|
PDCB pDCB, pdcb;
|
|
PSRB psrb, psrb2;
|
|
u_int16_t cnt, i;
|
|
union ccb *pccb;
|
|
|
|
pDCB = pACB->pLinkDCB;
|
|
if (pDCB == NULL)
|
|
return;
|
|
pdcb = pDCB;
|
|
do {
|
|
cnt = pdcb->GoingSRBCnt;
|
|
psrb = pdcb->pGoingSRB;
|
|
for (i = 0; i < cnt; i++) {
|
|
psrb2 = psrb->pNextSRB;
|
|
pccb = psrb->pccb;
|
|
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
/* ReleaseSRB(pDCB, pSRB); */
|
|
psrb->pNextSRB = pACB->pFreeSRB;
|
|
pACB->pFreeSRB = psrb;
|
|
xpt_done(pccb);
|
|
psrb = psrb2;
|
|
}
|
|
pdcb->GoingSRBCnt = 0;;
|
|
pdcb->pGoingSRB = NULL;
|
|
pdcb->TagMask = 0;
|
|
pdcb = pdcb->pNextDCB;
|
|
}
|
|
while (pdcb != pDCB);
|
|
}
|
|
|
|
static void
|
|
trm_ResetSCSIBus(PACB pACB)
|
|
{
|
|
int intflag;
|
|
|
|
intflag = splcam();
|
|
pACB->ACBFlag |= RESET_DEV;
|
|
|
|
trm_reg_write16(DO_RSTSCSI,TRMREG_SCSI_CONTROL);
|
|
while (!(trm_reg_read16(TRMREG_SCSI_INTSTATUS) & INT_SCSIRESET));
|
|
splx(intflag);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
trm_ScsiRstDetect(PACB pACB)
|
|
{
|
|
int intflag;
|
|
u_long wlval;
|
|
|
|
TRM_DPRINTF("trm_ScsiRstDetect \n");
|
|
wlval = 1000;
|
|
while (--wlval)
|
|
DELAY(1000);
|
|
intflag = splcam();
|
|
trm_reg_write8(STOPDMAXFER,TRMREG_DMA_CONTROL);
|
|
|
|
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
|
|
|
|
if (pACB->ACBFlag & RESET_DEV)
|
|
pACB->ACBFlag |= RESET_DONE;
|
|
else {
|
|
pACB->ACBFlag |= RESET_DETECT;
|
|
trm_ResetDevParam(pACB);
|
|
/* trm_DoingSRB_Done(pACB); ???? */
|
|
trm_RecoverSRB(pACB);
|
|
pACB->pActiveDCB = NULL;
|
|
pACB->ACBFlag = 0;
|
|
trm_DoWaitingSRB(pACB);
|
|
}
|
|
splx(intflag);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB)
|
|
{
|
|
union ccb *pccb;
|
|
struct ccb_scsiio *pcsio;
|
|
|
|
pccb = pSRB->pccb;
|
|
pcsio = &pccb->csio;
|
|
|
|
pSRB->SRBFlag |= AUTO_REQSENSE;
|
|
pSRB->Segment0[0] = *((u_long *) &(pSRB->CmdBlock[0]));
|
|
pSRB->Segment0[1] = *((u_long *) &(pSRB->CmdBlock[4]));
|
|
pSRB->Segment1[0] = (u_long) ((pSRB->ScsiCmdLen << 8) +
|
|
pSRB->SRBSGCount);
|
|
pSRB->Segment1[1] = pSRB->SRBTotalXferLength; /* ?????????? */
|
|
|
|
/* $$$$$$ Status of initiator/target $$$$$$$$ */
|
|
pSRB->AdaptStatus = 0;
|
|
pSRB->TargetStatus = 0;
|
|
/* $$$$$$ Status of initiator/target $$$$$$$$ */
|
|
|
|
pSRB->SRBTotalXferLength = sizeof(pcsio->sense_data);
|
|
pSRB->SgSenseTemp.address = pSRB->SegmentX[0].address;
|
|
pSRB->SgSenseTemp.length = pSRB->SegmentX[0].length;
|
|
pSRB->SegmentX[0].address = (u_long) vtophys(&pcsio->sense_data);
|
|
pSRB->SegmentX[0].length = (u_long) pcsio->sense_len;
|
|
pSRB->SRBSGListPointer = &pSRB->SegmentX[0];
|
|
pSRB->SRBSGCount = 1;
|
|
pSRB->SRBSGIndex = 0;
|
|
|
|
*((u_long *) &(pSRB->CmdBlock[0])) = 0x00000003;
|
|
pSRB->CmdBlock[1] = pDCB->IdentifyMsg << 5;
|
|
*((u_int16_t *) &(pSRB->CmdBlock[4])) = pcsio->sense_len;
|
|
pSRB->ScsiCmdLen = 6;
|
|
|
|
if (trm_StartSCSI(pACB, pDCB, pSRB))
|
|
/*
|
|
* If trm_StartSCSI return 1 :
|
|
* current interrupt status is interrupt disreenable
|
|
* It's said that SCSI processor has more one SRB need to do
|
|
*/
|
|
trm_RewaitSRB(pDCB, pSRB);
|
|
}
|
|
|
|
static void
|
|
trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB)
|
|
{
|
|
|
|
pSRB->MsgCnt = 1;
|
|
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
|
|
}
|
|
|
|
static void
|
|
trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB)
|
|
{
|
|
|
|
pSRB->MsgOutBuf[0] = MSG_ABORT;
|
|
trm_EnableMsgOutAbort2(pACB, pSRB);
|
|
}
|
|
|
|
static void
|
|
trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit,u_int32_t i,u_int32_t j)
|
|
{
|
|
PNVRAMTYPE pEEpromBuf;
|
|
u_int8_t bval,PeriodIndex;
|
|
u_int target_id,target_lun;
|
|
PDCB pTempDCB;
|
|
int intflag;
|
|
|
|
target_id = i;
|
|
target_lun = j;
|
|
|
|
intflag = splcam();
|
|
if (pACB->pLinkDCB == 0) {
|
|
pACB->pLinkDCB = pDCB;
|
|
/*
|
|
* RunRobin impersonate the role
|
|
* that let each device had good proportion
|
|
* about SCSI command proceeding
|
|
*/
|
|
pACB->pDCBRunRobin = pDCB;
|
|
pDCB->pNextDCB = pDCB;
|
|
} else {
|
|
pTempDCB=pACB->pLinkDCB;
|
|
/* search the last nod of DCB link */
|
|
while (pTempDCB->pNextDCB != pACB->pLinkDCB)
|
|
pTempDCB = pTempDCB->pNextDCB;
|
|
/* connect current DCB with last DCB tail */
|
|
pTempDCB->pNextDCB = pDCB;
|
|
/* connect current DCB tail to this DCB Q head */
|
|
pDCB->pNextDCB=pACB->pLinkDCB;
|
|
}
|
|
splx(intflag);
|
|
|
|
pACB->DeviceCnt++;
|
|
pDCB->pDCBACB = pACB;
|
|
pDCB->TargetID = target_id;
|
|
pDCB->TargetLUN = target_lun;
|
|
pDCB->pWaitingSRB = NULL;
|
|
pDCB->pGoingSRB = NULL;
|
|
pDCB->GoingSRBCnt = 0;
|
|
pDCB->pActiveSRB = NULL;
|
|
pDCB->TagMask = 0;
|
|
pDCB->MaxCommand = 1;
|
|
pDCB->DCBFlag = 0;
|
|
/* $$$$$$$ */
|
|
pEEpromBuf = &trm_eepromBuf[unit];
|
|
pDCB->DevMode = pEEpromBuf->NvramTarget[target_id].NvmTarCfg0;
|
|
pDCB->AdpMode = pEEpromBuf->NvramChannelCfg;
|
|
/* $$$$$$$ */
|
|
/*
|
|
* disconnect enable ?
|
|
*/
|
|
if (pDCB->DevMode & NTC_DO_DISCONNECT) {
|
|
bval = 0xC0;
|
|
pDCB->tinfo.disc_tag |= TRM_USR_DISCENB ;
|
|
} else {
|
|
bval = 0x80;
|
|
pDCB->tinfo.disc_tag &= ~(TRM_USR_DISCENB);
|
|
}
|
|
bval |= target_lun;
|
|
pDCB->IdentifyMsg = bval;
|
|
/* $$$$$$$ */
|
|
/*
|
|
* tag Qing enable ?
|
|
*/
|
|
if (pDCB->DevMode & TAG_QUEUING_) {
|
|
pDCB->tinfo.disc_tag |= TRM_USR_TAGENB ;
|
|
} else
|
|
pDCB->tinfo.disc_tag &= ~(TRM_USR_TAGENB);
|
|
/* $$$$$$$ */
|
|
/*
|
|
* wide nego ,sync nego enable ?
|
|
*/
|
|
pDCB->SyncPeriod = 0;
|
|
pDCB->SyncOffset = 0;
|
|
PeriodIndex = pEEpromBuf->NvramTarget[target_id].NvmTarPeriod & 0x07;
|
|
pDCB->MaxNegoPeriod = dc395x_trm_clock_period[ PeriodIndex ] ;
|
|
pDCB->SyncMode = 0;
|
|
if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) &&
|
|
(pACB->Config & HCC_WIDE_CARD))
|
|
pDCB->SyncMode |= WIDE_NEGO_ENABLE;
|
|
/* enable wide nego */
|
|
if (pDCB->DevMode & NTC_DO_SYNC_NEGO)
|
|
pDCB->SyncMode |= SYNC_NEGO_ENABLE;
|
|
/* enable sync nego */
|
|
/* $$$$$$$ */
|
|
/*
|
|
* Fill in tinfo structure.
|
|
*/
|
|
pDCB->tinfo.user.period = pDCB->MaxNegoPeriod;
|
|
pDCB->tinfo.user.offset = (pDCB->SyncMode & SYNC_NEGO_ENABLE) ? 15 : 0;
|
|
pDCB->tinfo.user.width = (pDCB->SyncMode & WIDE_NEGO_ENABLE) ?
|
|
MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT;
|
|
|
|
pDCB->tinfo.current.period = 0;
|
|
pDCB->tinfo.current.offset = 0;
|
|
pDCB->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
}
|
|
|
|
static void
|
|
trm_initSRB(PSRB psrb)
|
|
{
|
|
|
|
psrb->PhysSRB = vtophys(psrb);
|
|
}
|
|
|
|
static void
|
|
trm_linkSRB(PACB pACB)
|
|
{
|
|
u_int16_t i;
|
|
|
|
for (i = 0; i < MAX_SRB_CNT; i++) {
|
|
if (i != MAX_SRB_CNT - 1)
|
|
/*
|
|
* link all SRB
|
|
*/
|
|
pACB->SRB_array[i].pNextSRB = &pACB->SRB_array[i+1];
|
|
else
|
|
/*
|
|
* load NULL to NextSRB of the last SRB
|
|
*/
|
|
pACB->SRB_array[i].pNextSRB = NULL;
|
|
/*
|
|
* convert and save physical address of SRB to pSRB->PhysSRB
|
|
*/
|
|
trm_initSRB((PSRB) &pACB->SRB_array[i]);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
trm_initACB(PACB pACB, u_int16_t unit)
|
|
{
|
|
PNVRAMTYPE pEEpromBuf;
|
|
u_int16_t i,j;
|
|
|
|
pEEpromBuf = &trm_eepromBuf[unit];
|
|
pACB->max_id = 15;
|
|
|
|
if (pEEpromBuf->NvramChannelCfg & NAC_SCANLUN)
|
|
pACB->max_lun = 7;
|
|
else
|
|
pACB->max_lun = 0;
|
|
|
|
TRM_DPRINTF("trm: pACB->max_id= %d pACB->max_lun= %d \n",
|
|
pACB->max_id, pACB->max_lun);
|
|
|
|
pACB->pLinkDCB = NULL;
|
|
pACB->pDCBRunRobin = NULL;
|
|
pACB->pActiveDCB = NULL;
|
|
pACB->pFreeSRB = pACB->SRB_array;
|
|
pACB->AdapterUnit = unit;
|
|
pACB->AdaptSCSIID = pEEpromBuf->NvramScsiId;
|
|
pACB->AdaptSCSILUN = 0;
|
|
pACB->DeviceCnt = 0;
|
|
pACB->TagMaxNum = 2 << pEEpromBuf->NvramMaxTag ;
|
|
pACB->ACBFlag = 0;
|
|
/*
|
|
* link all device's SRB Q of this adapter
|
|
*/
|
|
trm_linkSRB(pACB);
|
|
/*
|
|
* temp SRB for Q tag used or abord command used
|
|
*/
|
|
pACB->pTmpSRB = &pACB->TmpSRB;
|
|
/*
|
|
* convert and save physical address of SRB to pSRB->PhysSRB
|
|
*/
|
|
trm_initSRB(pACB->pTmpSRB);
|
|
/* allocate DCB array for scan device */
|
|
for (i = 0; i < (pACB->max_id +1); i++) {
|
|
if (pACB->AdaptSCSIID != i) {
|
|
for (j = 0; j < (pACB->max_lun +1); j++) {
|
|
pACB->scan_devices[i][j] = 1;
|
|
pACB->pDCB[i][j]= (PDCB) malloc (
|
|
sizeof (struct _DCB), M_DEVBUF, M_WAITOK);
|
|
trm_initDCB(pACB,
|
|
pACB->pDCB[i][j], unit, i, j);
|
|
TRM_DPRINTF("pDCB= %8x \n",
|
|
(u_int)pACB->pDCB[i][j]);
|
|
}
|
|
}
|
|
}
|
|
TRM_DPRINTF("sizeof(struct _DCB)= %8x \n",sizeof(struct _DCB));
|
|
TRM_DPRINTF("sizeof(struct _ACB)= %8x \n",sizeof(struct _ACB));
|
|
TRM_DPRINTF("sizeof(struct _SRB)= %8x \n",sizeof(struct _SRB));
|
|
}
|
|
|
|
static void
|
|
TRM_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB)
|
|
{
|
|
u_int8_t *bpEeprom = (u_int8_t *) pEEpromBuf;
|
|
u_int8_t bAddr;
|
|
|
|
/* Enable SEEPROM */
|
|
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM),
|
|
TRMREG_GEN_CONTROL);
|
|
/*
|
|
* Write enable
|
|
*/
|
|
TRM_write_cmd(pACB, 0x04, 0xFF);
|
|
trm_reg_write8(0, TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++) {
|
|
TRM_set_data(pACB, bAddr, *bpEeprom);
|
|
}
|
|
/*
|
|
* Write disable
|
|
*/
|
|
TRM_write_cmd(pACB, 0x04, 0x00);
|
|
trm_reg_write8(0 , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
/* Disable SEEPROM */
|
|
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM),
|
|
TRMREG_GEN_CONTROL);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
TRM_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData)
|
|
{
|
|
int i;
|
|
u_int8_t bSendData;
|
|
/*
|
|
* Send write command & address
|
|
*/
|
|
|
|
TRM_write_cmd(pACB, 0x05, bAddr);
|
|
/*
|
|
* Write data
|
|
*/
|
|
for (i = 0; i < 8; i++, bData <<= 1) {
|
|
bSendData = NVR_SELECT;
|
|
if (bData & 0x80)
|
|
/* Start from bit 7 */
|
|
bSendData |= NVR_BITOUT;
|
|
trm_reg_write8(bSendData , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
}
|
|
trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
/*
|
|
* Disable chip select
|
|
*/
|
|
trm_reg_write8(0 , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8(NVR_SELECT ,TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
/*
|
|
* Wait for write ready
|
|
*/
|
|
while (1) {
|
|
trm_reg_write8((NVR_SELECT | NVR_CLOCK), TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
if (trm_reg_read8(TRMREG_GEN_NVRAM) & NVR_BITIN) {
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* Disable chip select
|
|
*/
|
|
trm_reg_write8(0, TRMREG_GEN_NVRAM);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
TRM_read_all(PNVRAMTYPE pEEpromBuf, PACB pACB)
|
|
{
|
|
u_int8_t *bpEeprom = (u_int8_t*) pEEpromBuf;
|
|
u_int8_t bAddr;
|
|
|
|
/*
|
|
* Enable SEEPROM
|
|
*/
|
|
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM),
|
|
TRMREG_GEN_CONTROL);
|
|
for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++)
|
|
*bpEeprom = TRM_get_data(pACB, bAddr);
|
|
/*
|
|
* Disable SEEPROM
|
|
*/
|
|
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM),
|
|
TRMREG_GEN_CONTROL);
|
|
return;
|
|
}
|
|
|
|
static u_int8_t
|
|
TRM_get_data(PACB pACB, u_int8_t bAddr)
|
|
{
|
|
int i;
|
|
u_int8_t bReadData, bData = 0;
|
|
/*
|
|
* Send read command & address
|
|
*/
|
|
|
|
TRM_write_cmd(pACB, 0x06, bAddr);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
/*
|
|
* Read data
|
|
*/
|
|
trm_reg_write8((NVR_SELECT | NVR_CLOCK) , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM);
|
|
/*
|
|
* Get data bit while falling edge
|
|
*/
|
|
bReadData = trm_reg_read8(TRMREG_GEN_NVRAM);
|
|
bData <<= 1;
|
|
if (bReadData & NVR_BITIN) {
|
|
bData |= 1;
|
|
}
|
|
TRM_wait_30us(pACB);
|
|
}
|
|
/*
|
|
* Disable chip select
|
|
*/
|
|
trm_reg_write8(0, TRMREG_GEN_NVRAM);
|
|
return (bData);
|
|
}
|
|
|
|
static void
|
|
TRM_wait_30us(PACB pACB)
|
|
{
|
|
|
|
/* ScsiPortStallExecution(30); wait 30 us */
|
|
trm_reg_write8(5, TRMREG_GEN_TIMER);
|
|
while (!(trm_reg_read8(TRMREG_GEN_STATUS) & GTIMEOUT));
|
|
return;
|
|
}
|
|
|
|
static void
|
|
TRM_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr)
|
|
{
|
|
int i;
|
|
u_int8_t bSendData;
|
|
|
|
for (i = 0; i < 3; i++, bCmd <<= 1) {
|
|
/*
|
|
* Program SB+OP code
|
|
*/
|
|
bSendData = NVR_SELECT;
|
|
if (bCmd & 0x04)
|
|
bSendData |= NVR_BITOUT;
|
|
/* start from bit 2 */
|
|
trm_reg_write8(bSendData, TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
}
|
|
for (i = 0; i < 7; i++, bAddr <<= 1) {
|
|
/*
|
|
* Program address
|
|
*/
|
|
bSendData = NVR_SELECT;
|
|
if (bAddr & 0x40)
|
|
/* Start from bit 6 */
|
|
bSendData |= NVR_BITOUT;
|
|
trm_reg_write8(bSendData , TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
}
|
|
trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM);
|
|
TRM_wait_30us(pACB);
|
|
}
|
|
|
|
static void
|
|
trm_check_eeprom(PNVRAMTYPE pEEpromBuf, PACB pACB)
|
|
{
|
|
u_int16_t *wpEeprom = (u_int16_t *) pEEpromBuf;
|
|
u_int16_t wAddr, wCheckSum;
|
|
u_long dAddr, *dpEeprom;
|
|
|
|
TRM_read_all(pEEpromBuf,pACB);
|
|
wCheckSum = 0;
|
|
for (wAddr = 0, wpEeprom = (u_int16_t *) pEEpromBuf;
|
|
wAddr < 64; wAddr++, wpEeprom++) {
|
|
wCheckSum += *wpEeprom;
|
|
}
|
|
if (wCheckSum != 0x1234) {
|
|
/*
|
|
* Checksum error, load default
|
|
*/
|
|
pEEpromBuf->NvramSubVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM;
|
|
pEEpromBuf->NvramSubVendorID[1] =
|
|
(u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8);
|
|
pEEpromBuf->NvramSubSysID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040;
|
|
pEEpromBuf->NvramSubSysID[1] =
|
|
(u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8);
|
|
pEEpromBuf->NvramSubClass = 0x00;
|
|
pEEpromBuf->NvramVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM;
|
|
pEEpromBuf->NvramVendorID[1] =
|
|
(u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8);
|
|
pEEpromBuf->NvramDeviceID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040;
|
|
pEEpromBuf->NvramDeviceID[1] =
|
|
(u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8);
|
|
pEEpromBuf->NvramReserved = 0x00;
|
|
|
|
for (dAddr = 0, dpEeprom = (u_long *) pEEpromBuf->NvramTarget;
|
|
dAddr < 16; dAddr++, dpEeprom++) {
|
|
*dpEeprom = 0x00000077;
|
|
/* NvmTarCfg3,NvmTarCfg2,NvmTarPeriod,NvmTarCfg0 */
|
|
}
|
|
|
|
*dpEeprom++ = 0x04000F07;
|
|
/* NvramMaxTag,NvramDelayTime,NvramChannelCfg,NvramScsiId */
|
|
*dpEeprom++ = 0x00000015;
|
|
/* NvramReserved1,NvramBootLun,NvramBootTarget,NvramReserved0 */
|
|
for (dAddr = 0; dAddr < 12; dAddr++, dpEeprom++)
|
|
*dpEeprom = 0x00;
|
|
pEEpromBuf->NvramCheckSum = 0x00;
|
|
for (wAddr = 0, wCheckSum = 0, wpEeprom = (u_int16_t *) pEEpromBuf;
|
|
wAddr < 63; wAddr++, wpEeprom++)
|
|
wCheckSum += *wpEeprom;
|
|
*wpEeprom = 0x1234 - wCheckSum;
|
|
TRM_write_all(pEEpromBuf,pACB);
|
|
}
|
|
return;
|
|
}
|
|
static int
|
|
trm_initAdapter(PACB pACB, u_int16_t unit, device_t pci_config_id)
|
|
{
|
|
PNVRAMTYPE pEEpromBuf;
|
|
u_int16_t wval;
|
|
u_int8_t bval;
|
|
|
|
pEEpromBuf = &trm_eepromBuf[unit];
|
|
|
|
/* 250ms selection timeout */
|
|
trm_reg_write8(SEL_TIMEOUT, TRMREG_SCSI_TIMEOUT);
|
|
/* Mask all the interrupt */
|
|
trm_reg_write8(0x00, TRMREG_DMA_INTEN);
|
|
trm_reg_write8(0x00, TRMREG_SCSI_INTEN);
|
|
/* Reset SCSI module */
|
|
trm_reg_write16(DO_RSTMODULE, TRMREG_SCSI_CONTROL);
|
|
/* program configuration 0 */
|
|
pACB->Config = HCC_AUTOTERM | HCC_PARITY;
|
|
if (trm_reg_read8(TRMREG_GEN_STATUS) & WIDESCSI)
|
|
pACB->Config |= HCC_WIDE_CARD;
|
|
if (pEEpromBuf->NvramChannelCfg & NAC_POWERON_SCSI_RESET)
|
|
pACB->Config |= HCC_SCSI_RESET;
|
|
if (pACB->Config & HCC_PARITY)
|
|
bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;
|
|
else
|
|
bval = PHASELATCH | INITIATOR | BLOCKRST ;
|
|
trm_reg_write8(bval,TRMREG_SCSI_CONFIG0);
|
|
/* program configuration 1 */
|
|
trm_reg_write8(0x13, TRMREG_SCSI_CONFIG1);
|
|
/* program Host ID */
|
|
bval = pEEpromBuf->NvramScsiId;
|
|
trm_reg_write8(bval, TRMREG_SCSI_HOSTID);
|
|
/* set ansynchronous transfer */
|
|
trm_reg_write8(0x00, TRMREG_SCSI_OFFSET);
|
|
/* Trun LED control off*/
|
|
wval = trm_reg_read16(TRMREG_GEN_CONTROL) & 0x7F;
|
|
trm_reg_write16(wval, TRMREG_GEN_CONTROL);
|
|
/* DMA config */
|
|
wval = trm_reg_read16(TRMREG_DMA_CONFIG) | DMA_ENHANCE;
|
|
trm_reg_write16(wval, TRMREG_DMA_CONFIG);
|
|
/* Clear pending interrupt status */
|
|
trm_reg_read8(TRMREG_SCSI_INTSTATUS);
|
|
/* Enable SCSI interrupt */
|
|
trm_reg_write8(0x7F, TRMREG_SCSI_INTEN);
|
|
trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN);
|
|
return (0);
|
|
}
|
|
|
|
static PACB
|
|
trm_init(u_int16_t unit, device_t pci_config_id)
|
|
{
|
|
PACB pACB;
|
|
int rid = PCIR_MAPS;
|
|
|
|
pACB = (PACB) device_get_softc(pci_config_id);
|
|
if (!pACB) {
|
|
printf("trm%d: cannot allocate ACB !\n", unit);
|
|
return (NULL);
|
|
}
|
|
bzero (pACB, sizeof (struct _ACB));
|
|
pACB->iores = bus_alloc_resource(pci_config_id, SYS_RES_IOPORT,
|
|
&rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (pACB->iores == NULL) {
|
|
printf("trm_init: bus_alloc_resource failed!\n");
|
|
return (NULL);
|
|
}
|
|
pACB->tag = rman_get_bustag(pACB->iores);
|
|
pACB->bsh = rman_get_bushandle(pACB->iores);
|
|
if (bus_dma_tag_create(/*parent_dmat*/ NULL,
|
|
/*alignment*/ 1,
|
|
/*boundary*/ 0,
|
|
/*lowaddr*/ BUS_SPACE_MAXADDR_32BIT,
|
|
/*highaddr*/ BUS_SPACE_MAXADDR,
|
|
/*filter*/ NULL,
|
|
/*filterarg*/ NULL,
|
|
/*maxsize*/ MAXBSIZE,
|
|
/*nsegments*/ TRM_NSEG,
|
|
/*maxsegsz*/ TRM_MAXTRANSFER_SIZE,
|
|
/*flags*/ BUS_DMA_ALLOCNOW,
|
|
&pACB->buffer_dmat) != 0)
|
|
goto bad;
|
|
trm_check_eeprom(&trm_eepromBuf[unit],pACB);
|
|
trm_initACB(pACB, unit);
|
|
if (trm_initAdapter(pACB, unit, pci_config_id)) {
|
|
printf("trm_initAdapter: initial ERROR\n");
|
|
goto bad;
|
|
}
|
|
return (pACB);
|
|
bad:
|
|
if (pACB->iores)
|
|
bus_release_resource(pci_config_id, SYS_RES_IOPORT, PCIR_MAPS,
|
|
pACB->iores);
|
|
if (pACB->buffer_dmat)
|
|
bus_dma_tag_destroy(pACB->buffer_dmat);
|
|
return (NULL);
|
|
}
|
|
|
|
static int
|
|
trm_attach(device_t pci_config_id)
|
|
{
|
|
struct cam_devq *device_Q;
|
|
u_long device_id;
|
|
PACB pACB = 0;
|
|
int rid = 0;
|
|
int unit = device_get_unit(pci_config_id);
|
|
|
|
device_id = pci_get_devid(pci_config_id);
|
|
/*
|
|
* These cards do not allow memory mapped accesses
|
|
*/
|
|
if (device_id == PCI_DEVICEID_TRMS1040) {
|
|
if ((pACB=trm_init((u_int16_t) unit,
|
|
pci_config_id)) == NULL) {
|
|
printf("trm%d: trm_init error!\n",unit);
|
|
return (ENXIO);
|
|
}
|
|
} else
|
|
return (ENXIO);
|
|
/* After setting up the adapter, map our interrupt */
|
|
/*
|
|
* Now let the CAM generic SCSI layer find the SCSI devices on the bus
|
|
* start queue to reset to the idle loop.
|
|
* Create device queue of SIM(s)
|
|
* (MAX_START_JOB - 1) : max_sim_transactions
|
|
*/
|
|
pACB->irq = bus_alloc_resource(pci_config_id, SYS_RES_IRQ, &rid, 0,
|
|
~0, 1, RF_SHAREABLE | RF_ACTIVE);
|
|
if (pACB->irq == NULL ||
|
|
bus_setup_intr(pci_config_id, pACB->irq,
|
|
INTR_TYPE_CAM, trm_Interrupt, pACB, &pACB->ih)) {
|
|
printf("trm%d: register Interrupt handler error!\n", unit);
|
|
goto bad;
|
|
}
|
|
device_Q = cam_simq_alloc(MAX_START_JOB);
|
|
if (device_Q == NULL){
|
|
printf("trm%d: device_Q == NULL !\n",unit);
|
|
goto bad;
|
|
}
|
|
/*
|
|
* Now tell the generic SCSI layer
|
|
* about our bus.
|
|
* If this is the xpt layer creating a sim, then it's OK
|
|
* to wait for an allocation.
|
|
* XXX Should we pass in a flag to indicate that wait is OK?
|
|
*
|
|
* SIM allocation
|
|
*
|
|
* SCSI Interface Modules
|
|
* The sim driver creates a sim for each controller. The sim device
|
|
* queue is separately created in order to allow resource sharing betwee
|
|
* sims. For instance, a driver may create one sim for each channel of
|
|
* a multi-channel controller and use the same queue for each channel.
|
|
* In this way, the queue resources are shared across all the channels
|
|
* of the multi-channel controller.
|
|
* trm_action : sim_action_func
|
|
* trm_poll : sim_poll_func
|
|
* "trm" : sim_name ,if sim_name = "xpt" ..M_DEVBUF,M_WAITOK
|
|
* pACB : *softc if sim_name <> "xpt" ..M_DEVBUF,M_NOWAIT
|
|
* pACB->unit : unit
|
|
* 1 : max_dev_transactions
|
|
* MAX_TAGS : max_tagged_dev_transactions
|
|
*
|
|
* *******Construct our first channel SIM entry
|
|
*/
|
|
pACB->psim = cam_sim_alloc(trm_action,
|
|
trm_poll,
|
|
"trm",
|
|
pACB,
|
|
unit,
|
|
1,
|
|
MAX_TAGS_CMD_QUEUE,
|
|
device_Q);
|
|
if (pACB->psim == NULL) {
|
|
printf("trm%d: SIM allocate fault !\n",unit);
|
|
cam_simq_free(device_Q); /* SIM allocate fault*/
|
|
goto bad;
|
|
}
|
|
if (xpt_bus_register(pACB->psim, 0) != CAM_SUCCESS) {
|
|
printf("trm%d: xpt_bus_register fault !\n",unit);
|
|
goto bad;
|
|
}
|
|
if (xpt_create_path(&pACB->ppath,
|
|
NULL,
|
|
cam_sim_path(pACB->psim),
|
|
CAM_TARGET_WILDCARD,
|
|
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
printf("trm%d: xpt_create_path fault !\n",unit);
|
|
xpt_bus_deregister(cam_sim_path(pACB->psim));
|
|
goto bad;
|
|
/*
|
|
* cam_sim_free(pACB->psim, TRUE); free_devq
|
|
* pACB->psim = NULL;
|
|
*/
|
|
return (ENXIO);
|
|
}
|
|
return (0);
|
|
bad:
|
|
if (pACB->iores)
|
|
bus_release_resource(pci_config_id, SYS_RES_IOPORT, PCIR_MAPS,
|
|
pACB->iores);
|
|
if (pACB->buffer_dmat)
|
|
bus_dma_tag_destroy(pACB->buffer_dmat);
|
|
if (pACB->ih)
|
|
bus_teardown_intr(pci_config_id, pACB->irq, pACB->ih);
|
|
if (pACB->irq)
|
|
bus_release_resource(pci_config_id, SYS_RES_IRQ, 0, pACB->irq);
|
|
if (pACB->psim)
|
|
cam_sim_free(pACB->psim, TRUE);
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
/*
|
|
* pci_device
|
|
* trm_probe (device_t tag, pcidi_t type)
|
|
*
|
|
*/
|
|
static int
|
|
trm_probe(device_t tag)
|
|
{
|
|
|
|
if (pci_get_devid(tag) == PCI_DEVICEID_TRMS1040) {
|
|
device_set_desc(tag,
|
|
"Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter");
|
|
return (0);
|
|
} else
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
trm_detach(device_t dev)
|
|
{
|
|
PACB pACB = device_get_softc(dev);
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS, pACB->iores);
|
|
bus_dma_tag_destroy(pACB->buffer_dmat);
|
|
bus_teardown_intr(dev, pACB->irq, pACB->ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, pACB->irq);
|
|
xpt_async(AC_LOST_DEVICE, pACB->ppath, NULL);
|
|
xpt_free_path(pACB->ppath);
|
|
xpt_bus_deregister(cam_sim_path(pACB->psim));
|
|
cam_sim_free(pACB->psim, TRUE);
|
|
return (0);
|
|
}
|
|
static device_method_t trm_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, trm_probe),
|
|
DEVMETHOD(device_attach, trm_attach),
|
|
DEVMETHOD(device_detach, trm_detach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t trm_driver = {
|
|
"trm", trm_methods, sizeof(struct _ACB)
|
|
};
|
|
|
|
static devclass_t trm_devclass;
|
|
DRIVER_MODULE(trm, pci, trm_driver, trm_devclass, 0, 0);
|