freebsd-dev/bin/dd/position.c
Pedro F. Giffuni 8a16b7a18f General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00

218 lines
5.8 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1991, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Keith Muller of the University of California, San Diego and Lance
* Visser of Convex Computer Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
#if 0
static char sccsid[] = "@(#)position.c 8.3 (Berkeley) 4/2/94";
#endif
#endif /* not lint */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/mtio.h>
#include <err.h>
#include <errno.h>
#include <inttypes.h>
#include <limits.h>
#include <signal.h>
#include <unistd.h>
#include "dd.h"
#include "extern.h"
static off_t
seek_offset(IO *io)
{
off_t n;
size_t sz;
n = io->offset;
sz = io->dbsz;
_Static_assert(sizeof(io->offset) == sizeof(int64_t), "64-bit off_t");
/*
* If the lseek offset will be negative, verify that this is a special
* device file. Some such files (e.g. /dev/kmem) permit "negative"
* offsets.
*
* Bail out if the calculation of a file offset would overflow.
*/
if ((io->flags & ISCHR) == 0 && (n < 0 || n > OFF_MAX / (ssize_t)sz))
errx(1, "seek offsets cannot be larger than %jd",
(intmax_t)OFF_MAX);
else if ((io->flags & ISCHR) != 0 && (uint64_t)n > UINT64_MAX / sz)
errx(1, "seek offsets cannot be larger than %ju",
(uintmax_t)UINT64_MAX);
return ((off_t)( (uint64_t)n * sz ));
}
/*
* Position input/output data streams before starting the copy. Device type
* dependent. Seekable devices use lseek, and the rest position by reading.
* Seeking past the end of file can cause null blocks to be written to the
* output.
*/
void
pos_in(void)
{
off_t cnt;
int warned;
ssize_t nr;
size_t bcnt;
/* If known to be seekable, try to seek on it. */
if (in.flags & ISSEEK) {
errno = 0;
if (lseek(in.fd, seek_offset(&in), SEEK_CUR) == -1 &&
errno != 0)
err(1, "%s", in.name);
return;
}
/* Don't try to read a really weird amount (like negative). */
if (in.offset < 0)
errx(1, "%s: illegal offset", "iseek/skip");
/*
* Read the data. If a pipe, read until satisfy the number of bytes
* being skipped. No differentiation for reading complete and partial
* blocks for other devices.
*/
for (bcnt = in.dbsz, cnt = in.offset, warned = 0; cnt;) {
if ((nr = read(in.fd, in.db, bcnt)) > 0) {
if (in.flags & ISPIPE) {
if (!(bcnt -= nr)) {
bcnt = in.dbsz;
--cnt;
}
} else
--cnt;
if (need_summary)
summary();
continue;
}
if (nr == 0) {
if (files_cnt > 1) {
--files_cnt;
continue;
}
errx(1, "skip reached end of input");
}
/*
* Input error -- either EOF with no more files, or I/O error.
* If noerror not set die. POSIX requires that the warning
* message be followed by an I/O display.
*/
if (ddflags & C_NOERROR) {
if (!warned) {
warn("%s", in.name);
warned = 1;
summary();
}
continue;
}
err(1, "%s", in.name);
}
}
void
pos_out(void)
{
struct mtop t_op;
off_t cnt;
ssize_t n;
/*
* If not a tape, try seeking on the file. Seeking on a pipe is
* going to fail, but don't protect the user -- they shouldn't
* have specified the seek operand.
*/
if (out.flags & (ISSEEK | ISPIPE)) {
errno = 0;
if (lseek(out.fd, seek_offset(&out), SEEK_CUR) == -1 &&
errno != 0)
err(1, "%s", out.name);
return;
}
/* Don't try to read a really weird amount (like negative). */
if (out.offset < 0)
errx(1, "%s: illegal offset", "oseek/seek");
/* If no read access, try using mtio. */
if (out.flags & NOREAD) {
t_op.mt_op = MTFSR;
t_op.mt_count = out.offset;
if (ioctl(out.fd, MTIOCTOP, &t_op) == -1)
err(1, "%s", out.name);
return;
}
/* Read it. */
for (cnt = 0; cnt < out.offset; ++cnt) {
if ((n = read(out.fd, out.db, out.dbsz)) > 0)
continue;
if (n == -1)
err(1, "%s", out.name);
/*
* If reach EOF, fill with NUL characters; first, back up over
* the EOF mark. Note, cnt has not yet been incremented, so
* the EOF read does not count as a seek'd block.
*/
t_op.mt_op = MTBSR;
t_op.mt_count = 1;
if (ioctl(out.fd, MTIOCTOP, &t_op) == -1)
err(1, "%s", out.name);
while (cnt++ < out.offset) {
n = write(out.fd, out.db, out.dbsz);
if (n == -1)
err(1, "%s", out.name);
if (n != out.dbsz)
errx(1, "%s: write failure", out.name);
}
break;
}
}