278 lines
8.9 KiB
C
278 lines
8.9 KiB
C
/*-
|
|
* SPDX-License-Identifier: ISC
|
|
*
|
|
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#include "opt_ah.h"
|
|
|
|
#include "ah.h"
|
|
#include "ah_internal.h"
|
|
|
|
#include "ar5212/ar5212.h"
|
|
#include "ar5212/ar5212reg.h"
|
|
#include "ar5212/ar5212desc.h"
|
|
|
|
/*
|
|
* Return the hardware NextTBTT in TSF
|
|
*/
|
|
uint64_t
|
|
ar5212GetNextTBTT(struct ath_hal *ah)
|
|
{
|
|
#define TU_TO_TSF(_tu) (((uint64_t)(_tu)) << 10)
|
|
return TU_TO_TSF(OS_REG_READ(ah, AR_TIMER0));
|
|
#undef TU_TO_TSF
|
|
}
|
|
|
|
/*
|
|
* Initialize all of the hardware registers used to
|
|
* send beacons. Note that for station operation the
|
|
* driver calls ar5212SetStaBeaconTimers instead.
|
|
*/
|
|
void
|
|
ar5212SetBeaconTimers(struct ath_hal *ah, const HAL_BEACON_TIMERS *bt)
|
|
{
|
|
struct ath_hal_5212 *ahp = AH5212(ah);
|
|
|
|
/*
|
|
* Limit the timers to their specific resolutions:
|
|
*
|
|
* + Timer 0 - 0..15 0xffff TU
|
|
* + Timer 1 - 0..18 0x7ffff TU/8
|
|
* + Timer 2 - 0..24 0x1ffffff TU/8
|
|
* + Timer 3 - 0..15 0xffff TU
|
|
*/
|
|
OS_REG_WRITE(ah, AR_TIMER0, bt->bt_nexttbtt & 0xffff);
|
|
OS_REG_WRITE(ah, AR_TIMER1, bt->bt_nextdba & 0x7ffff);
|
|
OS_REG_WRITE(ah, AR_TIMER2, bt->bt_nextswba & 0x1ffffff);
|
|
/* XXX force nextatim to be non-zero? */
|
|
OS_REG_WRITE(ah, AR_TIMER3, bt->bt_nextatim & 0xffff);
|
|
/*
|
|
* Set the Beacon register after setting all timers.
|
|
*/
|
|
if (bt->bt_intval & AR_BEACON_RESET_TSF) {
|
|
/*
|
|
* When resetting the TSF,
|
|
* write twice to the corresponding register; each
|
|
* write to the RESET_TSF bit toggles the internal
|
|
* signal to cause a reset of the TSF - but if the signal
|
|
* is left high, it will reset the TSF on the next
|
|
* chip reset also! writing the bit an even number
|
|
* of times fixes this issue
|
|
*/
|
|
OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_RESET_TSF);
|
|
}
|
|
OS_REG_WRITE(ah, AR_BEACON, bt->bt_intval);
|
|
ahp->ah_beaconInterval = (bt->bt_intval & HAL_BEACON_PERIOD);
|
|
}
|
|
|
|
/*
|
|
* Old api for setting up beacon timer registers when
|
|
* operating in !station mode. Note the fixed constants
|
|
* adjusting the DBA and SWBA timers and the fixed ATIM
|
|
* window.
|
|
*/
|
|
void
|
|
ar5212BeaconInit(struct ath_hal *ah,
|
|
uint32_t next_beacon, uint32_t beacon_period)
|
|
{
|
|
HAL_BEACON_TIMERS bt;
|
|
|
|
bt.bt_nexttbtt = next_beacon;
|
|
/*
|
|
* TIMER1: in AP/adhoc mode this controls the DMA beacon
|
|
* alert timer; otherwise it controls the next wakeup time.
|
|
* TIMER2: in AP mode, it controls the SBA beacon alert
|
|
* interrupt; otherwise it sets the start of the next CFP.
|
|
*/
|
|
switch (AH_PRIVATE(ah)->ah_opmode) {
|
|
case HAL_M_STA:
|
|
case HAL_M_MONITOR:
|
|
bt.bt_nextdba = 0xffff;
|
|
bt.bt_nextswba = 0x7ffff;
|
|
break;
|
|
case HAL_M_HOSTAP:
|
|
case HAL_M_IBSS:
|
|
bt.bt_nextdba = (next_beacon -
|
|
ah->ah_config.ah_dma_beacon_response_time) << 3; /* 1/8 TU */
|
|
bt.bt_nextswba = (next_beacon -
|
|
ah->ah_config.ah_sw_beacon_response_time) << 3; /* 1/8 TU */
|
|
break;
|
|
}
|
|
/*
|
|
* Set the ATIM window
|
|
* Our hardware does not support an ATIM window of 0
|
|
* (beacons will not work). If the ATIM windows is 0,
|
|
* force it to 1.
|
|
*/
|
|
bt.bt_nextatim = next_beacon + 1;
|
|
bt.bt_intval = beacon_period &
|
|
(AR_BEACON_PERIOD | AR_BEACON_RESET_TSF | AR_BEACON_EN);
|
|
ar5212SetBeaconTimers(ah, &bt);
|
|
}
|
|
|
|
void
|
|
ar5212ResetStaBeaconTimers(struct ath_hal *ah)
|
|
{
|
|
uint32_t val;
|
|
|
|
OS_REG_WRITE(ah, AR_TIMER0, 0); /* no beacons */
|
|
val = OS_REG_READ(ah, AR_STA_ID1);
|
|
val |= AR_STA_ID1_PWR_SAV; /* XXX */
|
|
/* tell the h/w that the associated AP is not PCF capable */
|
|
OS_REG_WRITE(ah, AR_STA_ID1,
|
|
val & ~(AR_STA_ID1_USE_DEFANT | AR_STA_ID1_PCF));
|
|
OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_PERIOD);
|
|
}
|
|
|
|
/*
|
|
* Set all the beacon related bits on the h/w for stations
|
|
* i.e. initializes the corresponding h/w timers;
|
|
* also tells the h/w whether to anticipate PCF beacons
|
|
*/
|
|
void
|
|
ar5212SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *bs)
|
|
{
|
|
struct ath_hal_5212 *ahp = AH5212(ah);
|
|
uint32_t nextTbtt, nextdtim,beaconintval, dtimperiod;
|
|
|
|
HALASSERT(bs->bs_intval != 0);
|
|
/* if the AP will do PCF */
|
|
if (bs->bs_cfpmaxduration != 0) {
|
|
/* tell the h/w that the associated AP is PCF capable */
|
|
OS_REG_WRITE(ah, AR_STA_ID1,
|
|
OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PCF);
|
|
|
|
/* set CFP_PERIOD(1.024ms) register */
|
|
OS_REG_WRITE(ah, AR_CFP_PERIOD, bs->bs_cfpperiod);
|
|
|
|
/* set CFP_DUR(1.024ms) register to max cfp duration */
|
|
OS_REG_WRITE(ah, AR_CFP_DUR, bs->bs_cfpmaxduration);
|
|
|
|
/* set TIMER2(128us) to anticipated time of next CFP */
|
|
OS_REG_WRITE(ah, AR_TIMER2, bs->bs_cfpnext << 3);
|
|
} else {
|
|
/* tell the h/w that the associated AP is not PCF capable */
|
|
OS_REG_WRITE(ah, AR_STA_ID1,
|
|
OS_REG_READ(ah, AR_STA_ID1) &~ AR_STA_ID1_PCF);
|
|
}
|
|
|
|
/*
|
|
* Set TIMER0(1.024ms) to the anticipated time of the next beacon.
|
|
*/
|
|
OS_REG_WRITE(ah, AR_TIMER0, bs->bs_nexttbtt);
|
|
|
|
/*
|
|
* Start the beacon timers by setting the BEACON register
|
|
* to the beacon interval; also write the tim offset which
|
|
* we should know by now. The code, in ar5211WriteAssocid,
|
|
* also sets the tim offset once the AID is known which can
|
|
* be left as such for now.
|
|
*/
|
|
OS_REG_WRITE(ah, AR_BEACON,
|
|
(OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_PERIOD|AR_BEACON_TIM))
|
|
| SM(bs->bs_intval, AR_BEACON_PERIOD)
|
|
| SM(bs->bs_timoffset ? bs->bs_timoffset + 4 : 0, AR_BEACON_TIM)
|
|
);
|
|
|
|
/*
|
|
* Configure the BMISS interrupt. Note that we
|
|
* assume the caller blocks interrupts while enabling
|
|
* the threshold.
|
|
*/
|
|
HALASSERT(bs->bs_bmissthreshold <= MS(0xffffffff, AR_RSSI_THR_BM_THR));
|
|
ahp->ah_rssiThr = (ahp->ah_rssiThr &~ AR_RSSI_THR_BM_THR)
|
|
| SM(bs->bs_bmissthreshold, AR_RSSI_THR_BM_THR);
|
|
OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr);
|
|
|
|
/*
|
|
* Program the sleep registers to correlate with the beacon setup.
|
|
*/
|
|
|
|
/*
|
|
* Oahu beacons timers on the station were used for power
|
|
* save operation (waking up in anticipation of a beacon)
|
|
* and any CFP function; Venice does sleep/power-save timers
|
|
* differently - so this is the right place to set them up;
|
|
* don't think the beacon timers are used by venice sta hw
|
|
* for any useful purpose anymore
|
|
* Setup venice's sleep related timers
|
|
* Current implementation assumes sw processing of beacons -
|
|
* assuming an interrupt is generated every beacon which
|
|
* causes the hardware to become awake until the sw tells
|
|
* it to go to sleep again; beacon timeout is to allow for
|
|
* beacon jitter; cab timeout is max time to wait for cab
|
|
* after seeing the last DTIM or MORE CAB bit
|
|
*/
|
|
#define CAB_TIMEOUT_VAL 10 /* in TU */
|
|
#define BEACON_TIMEOUT_VAL 10 /* in TU */
|
|
#define SLEEP_SLOP 3 /* in TU */
|
|
|
|
/*
|
|
* For max powersave mode we may want to sleep for longer than a
|
|
* beacon period and not want to receive all beacons; modify the
|
|
* timers accordingly; make sure to align the next TIM to the
|
|
* next DTIM if we decide to wake for DTIMs only
|
|
*/
|
|
beaconintval = bs->bs_intval & HAL_BEACON_PERIOD;
|
|
HALASSERT(beaconintval != 0);
|
|
if (bs->bs_sleepduration > beaconintval) {
|
|
HALASSERT(roundup(bs->bs_sleepduration, beaconintval) ==
|
|
bs->bs_sleepduration);
|
|
beaconintval = bs->bs_sleepduration;
|
|
}
|
|
dtimperiod = bs->bs_dtimperiod;
|
|
if (bs->bs_sleepduration > dtimperiod) {
|
|
HALASSERT(dtimperiod == 0 ||
|
|
roundup(bs->bs_sleepduration, dtimperiod) ==
|
|
bs->bs_sleepduration);
|
|
dtimperiod = bs->bs_sleepduration;
|
|
}
|
|
HALASSERT(beaconintval <= dtimperiod);
|
|
if (beaconintval == dtimperiod)
|
|
nextTbtt = bs->bs_nextdtim;
|
|
else
|
|
nextTbtt = bs->bs_nexttbtt;
|
|
nextdtim = bs->bs_nextdtim;
|
|
|
|
OS_REG_WRITE(ah, AR_SLEEP1,
|
|
SM((nextdtim - SLEEP_SLOP) << 3, AR_SLEEP1_NEXT_DTIM)
|
|
| SM(CAB_TIMEOUT_VAL, AR_SLEEP1_CAB_TIMEOUT)
|
|
| AR_SLEEP1_ASSUME_DTIM
|
|
| AR_SLEEP1_ENH_SLEEP_ENA
|
|
);
|
|
OS_REG_WRITE(ah, AR_SLEEP2,
|
|
SM((nextTbtt - SLEEP_SLOP) << 3, AR_SLEEP2_NEXT_TIM)
|
|
| SM(BEACON_TIMEOUT_VAL, AR_SLEEP2_BEACON_TIMEOUT)
|
|
);
|
|
OS_REG_WRITE(ah, AR_SLEEP3,
|
|
SM(beaconintval, AR_SLEEP3_TIM_PERIOD)
|
|
| SM(dtimperiod, AR_SLEEP3_DTIM_PERIOD)
|
|
);
|
|
HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: next DTIM %d\n",
|
|
__func__, bs->bs_nextdtim);
|
|
HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: next beacon %d\n",
|
|
__func__, nextTbtt);
|
|
HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: beacon period %d\n",
|
|
__func__, beaconintval);
|
|
HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: DTIM period %d\n",
|
|
__func__, dtimperiod);
|
|
#undef CAB_TIMEOUT_VAL
|
|
#undef BEACON_TIMEOUT_VAL
|
|
#undef SLEEP_SLOP
|
|
}
|