9389d5a95e
These variants have a few differences from the default AR9485 NIC, namely: * a non-default antenna switch config; * slightly different RX gain table setup; * an external XLNA hooked up to a GPIO pin; * (and not yet done) RSSI threshold differences when doing slow diversity. To make this possible: * Add the PCI device list from Linux ath9k, complete with vendor and sub-vendor IDs for various things to be enabled; * .. and until FreeBSD learns about a PCI device list like this, write a search function inspired by the USB device enumeration code; * add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this to initialise its local driver parameters upon attach; * copy these parameters over in the AR9300 HAL; * don't default to override the antenna switch - only do it for the chips that require it; * I brought over ar9300_attenuation_apply() from ath9k which is cleaner and easier to read for this particular NIC. This is a work in progress. I'm worried that there's some post-AR9380 NIC out there which doesn't work without the antenna override set as I currently haven't implemented bluetooth coexistence for the AR9380 and later HAL. But I'd rather have this code in the tree and fix it up before 11.0-RELEASE happens versus having a set of newer NICs in laptops be effectively RX deaf. Tested: * AR9380 (STA) * AR9485 CUS198 (STA) Obtained from: Qualcomm Atheros, Linux ath9k
84 lines
4.0 KiB
C
84 lines
4.0 KiB
C
#ifndef __AR9300_FREEBSD_H__
|
|
#define __AR9300_FREEBSD_H__
|
|
|
|
extern void ar9300_attach_freebsd_ops(struct ath_hal *ah);
|
|
extern HAL_BOOL ar9300_reset_freebsd(struct ath_hal *ah, HAL_OPMODE opmode,
|
|
struct ieee80211_channel *chan, HAL_BOOL bChannelChange,
|
|
HAL_STATUS *status);
|
|
extern void ar9300_config_pcie_freebsd(struct ath_hal *, HAL_BOOL, HAL_BOOL);
|
|
extern HAL_STATUS ar9300_eeprom_get_freebsd(struct ath_hal *, int param,
|
|
void *val);
|
|
extern HAL_BOOL ar9300_stop_tx_dma_freebsd(struct ath_hal *ah, u_int q);
|
|
extern void ar9300_ani_poll_freebsd(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan);
|
|
extern void ar9300_config_defaults_freebsd(struct ath_hal *ah,
|
|
HAL_OPS_CONFIG *ah_config);
|
|
extern HAL_BOOL ar9300_stop_dma_receive_freebsd(struct ath_hal *ah);
|
|
extern HAL_BOOL ar9300_get_pending_interrupts_freebsd(struct ath_hal *ah,
|
|
HAL_INT *masked);
|
|
extern HAL_INT ar9300_set_interrupts_freebsd(struct ath_hal *ah,
|
|
HAL_INT mask);
|
|
extern HAL_BOOL ar9300_per_calibration_freebsd(struct ath_hal *ah,
|
|
struct ieee80211_channel *chan, u_int rxchainmask,
|
|
HAL_BOOL longCal, HAL_BOOL *isCalDone);
|
|
extern HAL_BOOL ar9300_reset_cal_valid_freebsd(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan);
|
|
extern void ar9300_start_pcu_receive_freebsd(struct ath_hal *ah);
|
|
extern HAL_STATUS ar9300_proc_rx_desc_freebsd(struct ath_hal *ah,
|
|
struct ath_desc *ds, uint32_t pa, struct ath_desc *ds_next,
|
|
uint64_t tsf, struct ath_rx_status *rxs);
|
|
extern void ar9300_ani_rxmonitor_freebsd(struct ath_hal *ah,
|
|
const HAL_NODE_STATS *stats, const struct ieee80211_channel *chan);
|
|
extern void ar9300_freebsd_get_desc_link(struct ath_hal *, void *ds,
|
|
uint32_t *);
|
|
|
|
extern HAL_BOOL ar9300_freebsd_setup_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type,
|
|
u_int txPower, u_int txRate0, u_int txTries0, u_int keyIx,
|
|
u_int antMode, u_int flags, u_int rtsctsRate, u_int rtsCtsDuration,
|
|
u_int compicvLen, u_int compivLen, u_int comp);
|
|
extern HAL_BOOL ar9300_freebsd_setup_x_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, u_int txRate1, u_int txTries1,
|
|
u_int txRate2, u_int txTries2, u_int txRate3, u_int txTries3);
|
|
extern HAL_BOOL ar9300_freebsd_fill_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, HAL_DMA_ADDR *bufAddrList,
|
|
uint32_t *segLenList, u_int descId, u_int qId, HAL_BOOL firstSeg,
|
|
HAL_BOOL lastSeg, const struct ath_desc *ds0);
|
|
extern HAL_BOOL ar9300_freebsd_get_tx_completion_rates(struct ath_hal *ah,
|
|
const struct ath_desc *ds0, int *rates, int *tries);
|
|
extern void ar9300_freebsd_set_11n_rate_scenario(struct ath_hal *,
|
|
struct ath_desc *, u_int, u_int, HAL_11N_RATE_SERIES series[],
|
|
u_int, u_int);
|
|
|
|
extern HAL_BOOL ar9300_freebsd_chain_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds,
|
|
HAL_DMA_ADDR *bufAddrList,
|
|
uint32_t *segLenList,
|
|
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type,
|
|
u_int keyIx, HAL_CIPHER cipher, uint8_t numDelims,
|
|
HAL_BOOL firstSeg, HAL_BOOL lastSeg, HAL_BOOL lastAggr);
|
|
extern HAL_BOOL ar9300_freebsd_setup_first_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, u_int aggrLen, u_int flags, u_int txPower,
|
|
u_int txRate0, u_int txTries0, u_int antMode, u_int rtsctsRate,
|
|
u_int rtsctsDuration);
|
|
extern HAL_BOOL ar9300_freebsd_setup_last_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, const struct ath_desc *ds0);
|
|
|
|
extern void ar9300_freebsd_setup_11n_desc(struct ath_hal *ah,
|
|
void *ds, u_int pktLen, HAL_PKT_TYPE type, u_int txPower,
|
|
u_int keyIx, u_int flags);
|
|
|
|
extern HAL_STATUS ar9300_freebsd_proc_tx_desc(struct ath_hal *ah,
|
|
struct ath_desc *ds, struct ath_tx_status *ts);
|
|
|
|
extern void ar9300_freebsd_beacon_init(struct ath_hal *ah,
|
|
uint32_t next_beacon, uint32_t beacon_period);
|
|
|
|
extern HAL_BOOL ar9300_freebsd_get_mib_cycle_counts(struct ath_hal *ah,
|
|
HAL_SURVEY_SAMPLE *);
|
|
|
|
extern HAL_BOOL ar9300_freebsd_get_dfs_default_thresh(struct ath_hal *ah,
|
|
HAL_PHYERR_PARAM *pe);
|
|
|
|
#endif /* __AR9300_FREEBSD_H__ */
|