freebsd-dev/sys/i4b/layer1/isic/i4b_tel_s08.c
Hellmuth Michaelis b5dd89c336 remove redundant definitions of card types:
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
 - remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
2001-01-24 08:41:52 +00:00

304 lines
8.9 KiB
C

/*
* Copyright (c) 1996 Arne Helme. All rights reserved.
*
* Copyright (c) 1996 Gary Jennejohn. All rights reserved.
*
* Copyright (c) 1997, 2001 Hellmuth Michaelis. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* 4. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software and/or documentation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* isic - I4B Siemens ISDN Chipset Driver for Teles S0/8 and clones
* ================================================================
*
* $FreeBSD$
*
* last edit-date: [Wed Jan 24 09:27:58 2001]
*
*---------------------------------------------------------------------------*/
#include "isic.h"
#include "opt_i4b.h"
#if NISIC > 0 && defined(TEL_S0_8)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <net/if.h>
#include <machine/md_var.h>
#include <machine/i4b_ioctl.h>
#include <machine/i4b_trace.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/isic/i4b_isic.h>
#include <i4b/layer1/isic/i4b_hscx.h>
#define TELES_S08_MEMSIZE 0x1000
static const bus_size_t offset[] = { 0x100, 0x180, 0x1c0 };
/*---------------------------------------------------------------------------*
* Teles S0/8 write register routine
*---------------------------------------------------------------------------*/
static void
tels08_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.mem);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.mem);
offs += offset[what];
if (offs & 0x01)
offs |= 0x200;
bus_space_write_1(t, h, offs, data);
}
/*---------------------------------------------------------------------------*
* Teles S0/8 read register routine
*---------------------------------------------------------------------------*/
static u_int8_t
tels08_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.mem);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.mem);
offs += offset[what];
if (offs & 0x01)
offs |= 0x200;
return bus_space_read_1(t, h, offs);
}
/*---------------------------------------------------------------------------*
* Teles S0/8 fifo write access
*---------------------------------------------------------------------------*/
static void
tels08_write_fifo(struct l1_softc *sc, int what, void *data, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.mem);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.mem);
bus_space_write_region_1(t, h, offset[what], data, size);
}
/*---------------------------------------------------------------------------*
* Teles S0/8 fifo read access
*---------------------------------------------------------------------------*/
static void
tels08_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.mem);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.mem);
bus_space_read_region_1(t, h, offset[what], buf, size);
}
/*---------------------------------------------------------------------------*
* isic_probe_s08 - probe for Teles S0/8 and compatibles
*---------------------------------------------------------------------------*/
int
isic_probe_s08(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* pointer to softc */
void *ih = 0; /* dummy */
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for Teles S0/8!\n",
unit, unit);
return(ENXIO);
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
/* see if an io base was supplied */
if((sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
/* the S0/8 is completely memory mapped ! */
bus_release_resource(dev,SYS_RES_IOPORT,
sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
printf("isic%d: Error, iobase specified for Teles S0/8!\n", unit);
return(ENXIO);
}
/* allocate memory */
if(!(sc->sc_resources.mem =
bus_alloc_resource(dev, SYS_RES_MEMORY,
&sc->sc_resources.mem_rid,
0ul, ~0ul, TELES_S08_MEMSIZE, RF_ACTIVE)))
{
printf("isic%d: Could not allocate memory for Teles S0/8!\n", unit);
return(ENXIO);
}
/*
* get virtual addr. it's just needed to see if it is in
* the valid range
*/
sc->sc_vmem_addr = rman_get_virtual(sc->sc_resources.mem);
/* check if inside memory range of 0xA0000 .. 0xDF000 */
if((kvtop(sc->sc_vmem_addr) < 0xa0000) ||
(kvtop(sc->sc_vmem_addr) > 0xdf000))
{
printf("isic%d: Error, mem addr 0x%lx outside 0xA0000-0xDF000 for Teles S0/8!\n",
unit, kvtop(sc->sc_vmem_addr));
bus_release_resource(dev,SYS_RES_MEMORY,
sc->sc_resources.mem_rid,
sc->sc_resources.mem);
sc->sc_resources.mem = 0;
return(ENXIO);
}
/* setup ISAC access routines */
sc->clearirq = NULL;
sc->readreg = tels08_read_reg;
sc->writereg = tels08_write_reg;
sc->readfifo = tels08_read_fifo;
sc->writefifo = tels08_write_fifo;
sc->sc_cardtyp = CARD_TYPEP_8; /* setup card type */
sc->sc_bustyp = BUS_TYPE_IOM1; /* setup IOM bus type */
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* setup ISAC base addr, though we don't really need it */
ISAC_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x100);
/* setup HSCX base addr */
HSCX_A_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x180);
HSCX_B_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x1c0);
/* allocate our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not allocate irq for Teles S0/8!\n",unit);
bus_release_resource(dev,SYS_RES_MEMORY,
sc->sc_resources.mem_rid,
sc->sc_resources.mem);
sc->sc_resources.mem = 0;
return ENXIO;
}
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
/* check IRQ validity */
switch(sc->sc_irq)
{
case 2:
case 9: /* XXX */
case 3:
case 4:
case 5:
case 6:
case 7:
break;
default:
printf("isic%d: Error, invalid IRQ [%d] specified for Teles S0/8!\n",
unit, sc->sc_irq);
bus_release_resource(dev,SYS_RES_IRQ,
sc->sc_resources.irq_rid,
sc->sc_resources.irq);
sc->sc_resources.irq = 0;
bus_release_resource(dev,SYS_RES_MEMORY,
sc->sc_resources.mem_rid,
sc->sc_resources.mem);
sc->sc_resources.mem = 0;
return(ENXIO);
break;
}
/* register interupt routine */
bus_setup_intr(dev, sc->sc_resources.irq,
INTR_TYPE_NET,
(void(*)(void *))(isicintr),
sc, &ih);
return (0);
}
/*---------------------------------------------------------------------------*
* isic_attach_s08 - attach Teles S0/8 and compatibles
*---------------------------------------------------------------------------*/
int
isic_attach_s08(device_t dev)
{
struct l1_softc *sc = &l1_sc[device_get_unit(dev)];
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.mem);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.mem);
/* set card off */
bus_space_write_1(t, h, 0x80, 0);
DELAY(SEC_DELAY / 5);
/* set card on */
bus_space_write_1(t, h, 0x80, 1);
DELAY(SEC_DELAY / 5);
return 0;
}
#endif /* ISIC > 0 */