freebsd-dev/release/Makefile

599 lines
20 KiB
Makefile

# $Id: Makefile,v 1.243 1996/10/05 10:43:33 jkh Exp $
#
# How to roll a release:
#
# make release CHROOTDIR=<lots of disk> [ RELEASETAG=something ]
#
# As far as I know, this will roll everything nicely into the "stage"
# directory. I still need to write the two rules to move that into
# the "cdrom" and "ftp" directories.
# I also need to "make ports" and install those, but I'm not going to do
# that on a 14.4 line just yet...
#
# SET THIS !!!
#BUILDNAME=2.2-960501-SNAP
#CHROOTDIR=/junk/release
# If this is a RELEASE, then set
#RELEASETAG=RELENG_2_1_0
# Things which without too much trouble can be considered variables
EXPORT_DISTS= games manpages proflibs dict info doc
EXTRA_DISTS= krb des ${EXPORT_DISTS}
ALL_DISTS= bin ${EXTRA_DISTS}
KERNELS?= GENERIC
# Extra source tarballs; each argument is a pair of source dir and
# distribution name. The dist name should not exceed 7 characters
# (another "s" for "source" will be prepended).
EXTRA_SRC+= usr.sbin/sendmail/cf smailcf
BOOT1= etc/protocols etc/sysconfig
# mountpoint for filesystems.
MNT= /mnt
# other floppy parameters.
FDSIZE= 1200
FDLABEL= fd1200
ZIPNSPLIT= gzip --no-name -9 -c | split -b 240640 -
# Upper size for the mfs in the boot.flp kernel.
# These are adjusted down to the minimum needed by doFS.sh.
BOOTMFSSIZE= 1200
MFSINODE= 42000
# Things which will get you into trouble if you change them
DISTRIBUTIONS= bin ${EXTRA_DISTS}
MTREEFILES= ${.CURDIR}/../etc/mtree
RD= ${RELEASEDIR}/stage
FD= ${RELEASEDIR}/ftp
CD= ${RELEASEDIR}/cdrom
.if !defined(WHICH_CRUNCH)
WHICH_CRUNCH= boot fixit
.endif
REDO?= sysinstall
REDOSED= sed -e 's/dirs/release.1/' -e 's/trees/release.2/' \
-e 's/kerns/release.3/' -e 's/sysinstall/release.4/' \
-e 's/fixup/release.5/' -e 's/tarbin/release.6/' \
-e 's/tarsrc/release.7/' -e 's/boot\.flp/release.8/' \
-e 's/fixit\.flp/release.9/' -e 's/ftp/ftp.1/' \
-e 's/cdrom/cdrom.1/'
REDOREDO!= echo ${REDO} | ${REDOSED}
rerelease release:
.if !defined(CHROOTDIR) || !defined(BUILDNAME)
@echo "To make a release you must set CHROOTDIR and BUILDNAME" && false
.endif
.if make(release)
.if exists(${CHROOTDIR})
chflags -R noschg ${CHROOTDIR}/.
-rm -rf ${CHROOTDIR}
.endif
-mkdir -p ${CHROOTDIR}
cd ${.CURDIR}/../etc && ${MAKE} distrib-dirs DESTDIR=${CHROOTDIR}
cd ${.CURDIR}/../etc && ${MAKE} distribution DESTDIR=${CHROOTDIR}
cd ${.CURDIR}/.. && ${MAKE} install DESTDIR=${CHROOTDIR}
.if !defined(RELEASETAG)
cd ${CHROOTDIR}/usr && rm -rf src && \
cvs -d ${CVSROOT} co -P src
.if defined(INTCVSROOT)
cd ${CHROOTDIR}/usr && \
cvs -d ${INTCVSROOT} co -P src/secure src/eBones
.endif
.else
cd ${CHROOTDIR}/usr && rm -rf src && \
cvs co -d ${CVSROOT} -P -r ${RELEASETAG} src
.if defined(INTCVSROOT)
cd ${CHROOTDIR}/usr && \
cvs -d ${INTCVSROOT} co -P -r ${RELEASETAG} src/secure src/eBones
.endif
.endif
.if defined(LOCAL_PATCHES) && exists(${LOCAL_PATCHES})
cd ${CHROOTDIR}/usr/src && patch --silent < ${LOCAL_PATCHES}
.endif
.endif
.if make(rerelease)
.if !defined(RELEASENOUPDATE)
.if !defined(RELEASETAG)
cd ${CHROOTDIR}/usr/src && cvs -q update -P -d
.else
cd ${CHROOTDIR}/usr/src && cvs -q update -P -d -r ${RELEASETAG}
.endif
.endif
.endif
( cd ${CHROOTDIR}/usr/src/sys/conf && \
mv newvers.sh foo && \
sed "s/^RELEASE=.*/RELEASE=${BUILDNAME}/" foo > newvers.sh&& rm foo )
( cd ${CHROOTDIR}/usr/src/release/sysinstall && \
sed "s/__RELEASE/${BUILDNAME}/" version.h > version.h.new && \
mv version.h.new version.h && \
echo XXXX )
-test -f install.cfg && cp install.cfg ${CHROOTDIR}/usr/src/release
echo "#!/bin/sh" > ${CHROOTDIR}/mk
echo "set -ex" >> ${CHROOTDIR}/mk
echo "CFLAGS='-O2 -pipe'" >> ${CHROOTDIR}/mk
echo "export CFLAGS" >> ${CHROOTDIR}/mk
echo "RELEASEDIR=/R" >> ${CHROOTDIR}/mk
echo "export RELEASEDIR" >> ${CHROOTDIR}/mk
echo "cd /usr/src" >> ${CHROOTDIR}/mk
.if make(release)
echo "make world" >> ${CHROOTDIR}/mk
.endif
.if make(rerelease)
echo "make all install" >> ${CHROOTDIR}/mk
.endif
echo "cd /usr/src/release" >> ${CHROOTDIR}/mk
echo "make obj OBJLINK=yes" >> ${CHROOTDIR}/mk
echo "cd obj" >> ${CHROOTDIR}/mk
echo "rm -f ${REDOREDO}" >> ${CHROOTDIR}/mk
echo "cd /usr/src/release" >> ${CHROOTDIR}/mk
echo "make doRELEASE" >> ${CHROOTDIR}/mk
echo "echo make ${.TARGET} Finished" >> ${CHROOTDIR}/mk
chmod 755 ${CHROOTDIR}/mk
chroot ${CHROOTDIR} /mk
whap:
( cd ${CHROOTDIR}/usr/src/release/sysinstall && \
sed "s/__RELEASE/${BUILDNAME}/" version.h > version.h.new && mv version.h.new version.h )
clean:
rm -rf boot_crunch release.[0-9] release.1[0]
# Clean out ${RELEASEDIR} and make the directory structure.
release.1:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
-mkdir ${RELEASEDIR}
chflags -R noschg ${RELEASEDIR}/.
rm -rf ${RELEASEDIR}/*
mkdir ${RD}
mkdir ${RD}/floppies
mkdir ${RD}/trees
mkdir ${RD}/dists
mkdir ${RD}/kernels
for i in ${ALL_DISTS} ; do \
mkdir ${RD}/trees/$$i && \
mkdir ${RD}/dists/$$i && \
mtree -deU -f ${MTREEFILES}/BSD.root.dist \
-p ${RD}/trees/$$i > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.usr.dist \
-p ${RD}/trees/$$i/usr > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.include.dist \
-p ${RD}/trees/$$i/usr/include > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.var.dist \
-p ${RD}/trees/$$i/var > /dev/null ; \
done
touch release.1
# Install the system into the various distributions.
release.2:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
cd ${.CURDIR}/../etc && make distrib-dirs DESTDIR=${RD}/trees/bin
cd ${.CURDIR}/.. && make distribute DISTDIR=${RD}/trees
.if exists(${.CURDIR}/../eBones)
cd ${.CURDIR}/../eBones && ( \
make bootstrap &&\
make obj all help-distribute DISTDIR=${RD}/trees &&\
make kprog \
)
.endif
chflags -R noschg ${RD}/trees
touch release.2
# Make and install the generic kernel(s).
release.3:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
.for kernel in ${KERNELS}
rm -f ${RD}/kernels/${kernel}
rm -rf ${.CURDIR}/../sys/compile/${kernel}
cd ${.CURDIR} && ${MAKE} doKERNEL KERNEL=${kernel}
rm -rf ${.CURDIR}/../sys/compile/${kernel}
ln -f ${RD}/kernels/${kernel} ${RD}/trees/bin/kernel.${kernel}
.endfor
touch release.3
# Make and install the three crunched binaries which live on the floppies.
# You are not supposed to like this :-)
release.4:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
cd ${.CURDIR}/sysinstall && make depend all
rm -rf ${RD}/crunch
mkdir -p ${RD}/crunch
for j in ${WHICH_CRUNCH} ; do \
rm -rf $${j}_crunch && \
mkdir $${j}_crunch && \
( cd $${j}_crunch && \
crunchgen ${.CURDIR}/$${j}_crunch.conf && \
${MAKE} -f $${j}_crunch.mk all NOCRYPT=yes \
"CFLAGS=${CFLAGS} -DCRUNCHED_BINARY") && \
mv $${j}_crunch/$${j}_crunch ${RD}/crunch/$${j} && \
true || rm -rf $${j}_crunch ; \
done
touch release.4
#
# --==## Fix up the distributions. ##==--
#
release.5:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
# Handle some grief caused by the ammunition braindeadness.
for i in sbin/init bin/ed ; do \
( cd ${.CURDIR}/../$$i; \
make -DNOCRYPT clean all distribute DISTDIR=${RD}/trees ) ; \
done
# Move all the manpages out to their own dist
if [ -d ${RD}/trees/bin/usr/share/man ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/man . | \
tar xf - -C ${RD}/trees/manpages/usr/share/man && \
rm -rf ${RD}/trees/bin/usr/share/man; \
fi
# Move all the games out to their own dist
if [ -d ${RD}/trees/bin/usr/games ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/games . | \
tar -xf - -C ${RD}/trees/games/usr/games && \
rm -rf ${RD}/trees/bin/usr/games; \
fi
if [ -d ${RD}/trees/bin/usr/share/games ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/games . | \
tar -xf - -C ${RD}/trees/games/usr/share/games && \
rm -rf ${RD}/trees/bin/usr/share/games; \
fi
if [ -d ${RD}/trees/bin/var/games ] ; then \
tar -cf - -C ${RD}/trees/bin/var/games . | \
tar -xf - -C ${RD}/trees/games/var/games && \
rm -rf ${RD}/trees/bin/var/games; \
fi
# Move the dict out to their own dist
if [ -d ${RD}/trees/bin/usr/share/dict ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/dict . | \
tar -xf - -C ${RD}/trees/dict/usr/share/dict && \
rm -rf ${RD}/trees/bin/usr/share/dict; \
fi
for i in airport birthtoken flowers na.phone zipcodes ; do \
if [ -f ${RD}/trees/bin/usr/share/misc/$$i ] ; then \
mv ${RD}/trees/bin/usr/share/misc/$$i \
${RD}/trees/dict/usr/share/misc; \
fi ; \
done
# Move the info files out to their own dist
if [ -d ${RD}/trees/bin/usr/share/info ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/info . | \
tar -xf - -C ${RD}/trees/info/usr/share/info && \
rm -rf ${RD}/trees/bin/usr/share/info; \
fi
# Move the profiled libraries out to their own dist
for i in ${RD}/trees/bin/usr/lib/*_p.a ; do \
if [ -f $$i ] ; then \
mv $$i \
${RD}/trees/proflibs/usr/lib ; \
fi ; \
done
# Create symlinks for the MD5-based crypt lib, too. The
# automatically created links still point to the DES stuff,
# which went into its own distribution.
for i in ${RD}/trees/bin/usr/lib/libscrypt* ; do \
c=`echo $$i | sed -e 's/libscrypt/libcrypt/'` ; \
rm -f $$c ; \
ln -s `basename $$i` $$c ; \
done
# Remove some files we can faster regen after installing.
cd ${RD}/trees/bin/usr/share/misc && rm -f termcap.db vgrindefs.db
# Remove all the directories we don't need.
-cd ${RD}/trees && \
find ${EXTRA_DISTS} -depth -type d -print | xargs rmdir
touch release.5
#
# --==## Make binary dists ##==--
#
release.6:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/dists
mkdir -p ${RD}/dists
@for i in ${DISTRIBUTIONS} ; \
do \
if [ -d ${RD}/trees/$${i} ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
SD=${RD}/trees/$${i} \
TN=$$i TD=$$i ARG="." && \
echo "$${i} distribution is finished."; \
fi ; \
done
( cd ${RD}/dists && \
if [ -f krb/krb.aa ] ; then mv krb/* des && rmdir krb ; fi )
touch release.6
#
# --==## Make source dists ##==--
#
release.7:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
@cd ${.CURDIR} && $(MAKE) doTARBALL SD=/usr/src \
TD=src TN=sbase ARG="[A-Z]*"
@for i in `cd /usr/src && echo [a-z]*` ; do \
if [ -d /usr/src/$$i ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
TN=`echo s$$i | tr -d '.' | sed 's/usr/u/'` \
SD=/usr/src TD=src ARG="$$i" ; \
fi ; \
done
.if defined(EXTRA_SRC)
@set ${EXTRA_SRC} && \
while [ $$# -ge 2 ] ; do \
if [ -d /usr/src/$$1 ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
SD=/usr/src TN="s$$2" TD=src ARG="$$1" ; \
fi && shift && shift ; \
done
.endif
( cd ${RD}/dists/src && \
if [ -f ssecure.aa ] ; then mv ssecure.* ../des ; fi && \
if [ -f sebones.aa ] ; then mv sebones.* ../des ; fi && \
if [ -f ssecure.inf ] ; then mv ssecure.inf ../des ; fi && \
if [ -f sebones.inf ] ; then mv sebones.inf ../des ; fi ; )
@echo "src distribution is finished."
touch release.7
# Complete the bootfd
#
# Now, just to get this picture down once and for all:
#
# +------------------------------------------------------------------------+
# |boot.flp |
# +-----+-----+------------------------------------------------------------+
# |boot1|boot2|floppy filesystem "bootfd" |
# +-----+-----+-+--------------------------------------------------------+-+
# |kernel |
# +------------+-----------------------------------------+-+
# |mfs filesystem "mfsfd" |
# +-----------------------------------------+
#
release.8: write_mfs_in_kernel dumpnlist
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/mfsfd
mkdir ${RD}/mfsfd
cd ${RD}/mfsfd && \
mkdir -p dev mnt stand/help
@cd ${.CURDIR} && $(MAKE) installCRUNCH CRUNCH=boot \
DIR=${RD}/mfsfd/stand ZIP=false
( cd ${RD}/trees/bin/dev && \
ls console tty ttyv0 ttyv1 ttyv2 ttyv3 null zero \
*[sw]d* cuaa[01] cuaa[23] fd[01] rfd[01] \
cd0a mcd0a scd0a matcd0a wcd0c rst0 rft0 rwt0 | \
cpio -dump ${RD}/mfsfd/dev )
( cd ${RD}/mfsfd/dev && rm -f *[sw]d*[bdefgh] )
cd ${RD}/trees/bin && ls ${BOOT1} | cpio -dump ${RD}/mfsfd/stand
echo "nameserver 42/tcp name" > ${RD}/mfsfd/stand/etc/services
echo "ftp 21/tcp" >> ${RD}/mfsfd/stand/etc/services
echo "domain 53/tcp nameserver" >> ${RD}/mfsfd/stand/etc/services
echo "domain 53/udp nameserver" >> ${RD}/mfsfd/stand/etc/services
gzip -c ${.CURDIR}/../COPYRIGHT > ${RD}/mfsfd/stand/help/COPYRIGHT.hlp.gz
-test -f ${.CURDIR}/install.cfg && cp ${.CURDIR}/install.cfg ${RD}/mfsfd
# make the small bootfd
@echo "Making the small 4MB boot floppy."
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${BOOTMFSSIZE} ${RD}/mfsfd \
${MFSINODE} minimum
mv fs-image fs-image.4
mv fs-image.size fs-image.4.size
# add more stuff for the complete bootfd
@echo "Making the regular boot floppy."
tar --exclude CVS -cf - -C ${.CURDIR}/sysinstall help | \
tar xvf - -C ${RD}/mfsfd/stand
@echo "Compressing doc files..."
@gzip -9 ${RD}/mfsfd/stand/help/*.hlp
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${BOOTMFSSIZE} ${RD}/mfsfd \
${MFSINODE} minimum
mv fs-image fs-image.std
mv fs-image.size fs-image.std.size
cd ${.CURDIR} && ${MAKE} doMFSKERN FSIMAGE=4
cd ${.CURDIR} && ${MAKE} doMFSKERN FSIMAGE=std
mv ${RD}/floppies/bootstd.flp ${RD}/floppies/boot.flp
@echo "Regular boot floppy made."
touch release.8
#
# --==## Create a fixit floppy ##==--
#
release.9:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/fixitfd
mkdir ${RD}/fixitfd
cd ${RD}/fixitfd && \
mkdir dev stand bin sbin etc mnt mnt1 mnt2 mnt3 mnt4 tmp
@cd ${.CURDIR} && $(MAKE) installCRUNCH CRUNCH=fixit \
DIR=${RD}/fixitfd/stand ZIP=true
( cd ${RD}/fixitfd/dev && \
cp ${RD}/trees/bin/dev/MAKEDEV . && \
sh MAKEDEV all )
cp ${RD}/trees/bin/etc/spwd.db ${RD}/fixitfd/etc
cp ${.CURDIR}/fixit.profile ${RD}/fixitfd/.profile
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${FDSIZE} ${RD}/fixitfd \
10000 ${FDLABEL}
mv fs-image ${RD}/floppies/fixit.flp
touch release.9
#
# --==## Setup a suitable ftp-area ##==--
#
ftp.1:
mkdir -p ${FD}
cd ${RD} && find floppies -print | cpio -dumpl ${FD}
cd ${RD}/dists && find . -print | cpio -dumpl ${FD}
cp ${.CURDIR}/sysinstall/help/readme.hlp ${FD}/README.TXT
cp ${.CURDIR}/sysinstall/help/hardware.hlp ${FD}/HARDWARE.TXT
cp ${.CURDIR}/sysinstall/help/install.hlp ${FD}/INSTALL.TXT
cp ${.CURDIR}/sysinstall/help/relnotes.hlp ${FD}/RELNOTES.TXT
#
# --==## Setup a suitable cdrom-area ##==--
#
cdrom.1:
mkdir -p ${CD}/filesys
cd ${RD} && find floppies -print | cpio -dumpl ${CD}
cd ${RD}/dists && find . -print | cpio -dumpl ${CD}
ln -f ${RD}/kernels/MFSKERNEL.std ${CD}/kernel
ln -f ${RD}/trees/bin/usr/mdec/fbsdboot.exe ${CD}
for i in ${DISTRIBUTIONS} ; \
do \
if [ -d ${RD}/trees/$${i} ] ; then \
( cd ${RD}/trees/$${i} && \
find . -depth -print | cpio -dumpl ${CD}/filesys ) ; \
fi \
done
echo "CD_VERSION = ${BUILDNAME}" > ${CD}/cdrom.inf
cp ${.CURDIR}/sysinstall/help/readme.hlp ${CD}/README.TXT
cp ${.CURDIR}/sysinstall/help/hardware.hlp ${CD}/HARDWARE.TXT
cp ${.CURDIR}/sysinstall/help/install.hlp ${CD}/INSTALL.TXT
cp ${.CURDIR}/sysinstall/help/relnotes.hlp ${CD}/RELNOTES.TXT
# Various "subroutine" and other supporting targets.
doTARBALL:
.if !defined(SD)
@echo "SD undefined in doTARBALL" && exit 1
.endif
.if !defined(TD)
@echo "TB undefined in doTARBALL" && exit 1
.endif
.if !defined(ARG)
@echo "ARG undefined in doTARBALL" && exit 1
.endif
rm -rf ${RD}/dists/${TD}/${TN}*
mkdir -p ${RD}/dists/${TD}
( cd ${SD} && \
tn=`echo ${TN} | tr '[A-Z]' '[a-z]' | cut -c1-8` && \
echo rolling ${TD}/$$tn tarball &&\
tar --exclude CVS --exclude obj -cf - ${ARG} | \
${ZIPNSPLIT} ${RD}/dists/${TD}/$$tn. && \
mkdir -p ${TD} && sh ${.CURDIR}/info.sh \
${RD}/dists/${TD}/$$tn > ${RD}/dists/${TD}/$$tn.inf && \
if [ -f ${.CURDIR}/scripts/$${TD}-install.sh ]; then \
cp -p ${.CURDIR}/scripts/$${TD}-install.sh ${RD}/dists/${TD}/install.sh; \
fi && \
if [ "${SD}" != "/usr/src" ]; then \
mtree -c -i -p ${SD}/${ARG} \
-k gname,md5digest,mode,nlink,uname,size,link,type \
> ${RD}/dists/${TD}/$$tn.mtree ; else true; fi )
doRELEASE: release.1 release.2 release.3 release.4 release.5 release.6 \
release.7 release.8 release.9
cd ${.CURDIR} && ${MAKE} cdrom.1 ftp.1
@echo "Release done"
floppies:
cd ${.CURDIR} && ${MAKE} boot.flp
cd ${.CURDIR} && ${MAKE} fixit.flp
cd ${RD} && find floppies -print | cpio -dumpl ${FD}
boot.flp:
rm -f release.4 release.8
cd ${.CURDIR} && ${MAKE} release.4 release.8 WHICH_CRUNCH=boot
fixit.flp:
rm -f release.4 release.9
cd ${.CURDIR} && ${MAKE} release.4 release.9 WHICH_CRUNCH=fixit
write_mfs_in_kernel: ${.CURDIR}/write_mfs_in_kernel.c
${CC} ${CFLAGS} -o write_mfs_in_kernel ${.CURDIR}/write_mfs_in_kernel.c
dumpnlist: ${.CURDIR}/dumpnlist.c
${CC} ${CFLAGS} -o dumpnlist ${.CURDIR}/dumpnlist.c
ckRELEASEDIR:
.if !defined(RELEASEDIR)
@echo "To make a release RELEASEDIR must be defined" && false
.endif
installCRUNCH:
.if !defined(CRUNCH)
@echo "CRUNCH undefined in installCRUNCH" && exit 1
.endif
.if !defined(DIR)
@echo "DIR undefined in installCRUNCH" && exit 1
.endif
.if !defined(ZIP)
@echo "ZIP undefined in installCRUNCH" && exit 1
.endif
if ${ZIP} ; then \
gzip -9 < ${RD}/crunch/${CRUNCH} > ${DIR}/${CRUNCH}_crunch ; \
else \
ln -f ${RD}/crunch/${CRUNCH} ${DIR}/${CRUNCH}_crunch ; \
fi
chmod 555 ${DIR}/${CRUNCH}_crunch
for i in `crunchgen -l ${.CURDIR}/${CRUNCH}_crunch.conf` ; do \
ln -f ${DIR}/${CRUNCH}_crunch ${DIR}/$$i ; \
done
#
# --==## Compile a kernel by name ${KERNEL} ##==--
#
# We don't erase the sys/compile/${KERNEL} directory, since somebody
# may want to reuse it (release.8 presently)
#
doKERNEL:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -f ${RD}/kernels/${KERNEL}
cd ${.CURDIR}/../sys/i386/conf && config -n ${KERNEL}
cd ${.CURDIR}/../sys/compile/${KERNEL} && \
make depend && \
make kernel && \
cp kernel ${RD}/kernels/${KERNEL}
#
# --==## Put a filesystem into a BOOTMFS kernel ##==--
#
doMFSKERN:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
@rm -f ${RD}/kernels/BOOTMFS.${FSIMAGE}
@rm -f /sys/compile/BOOTMFS/mfs_vfsops.o
@cd ${.CURDIR}/../sys/i386/conf && \
sed -e '/SYSV/d' \
-e '/pty/d' \
-e '/PROCFS/d' \
-e '/KTRACE/d' \
-e 's/GENERIC/BOOTMFS/g' \
-e '/maxusers/s/10/4/' < GENERIC > BOOTMFS && \
echo "options MFS" >> BOOTMFS && \
echo "options NFS_NOSERVER" >> BOOTMFS && \
echo 'options "MAXCONS=4"' >> BOOTMFS && \
echo "options USERCONFIG_BOOT" >> BOOTMFS
@echo "options \"MFS_ROOT=`cat fs-image.${FSIMAGE}.size`\"" >> \
${.CURDIR}/../sys/i386/conf/BOOTMFS
cd ${.CURDIR} && ${MAKE} doKERNEL KERNEL=BOOTMFS
@rm -rf ${RD}/boot.${FSIMAGE}
@mkdir ${RD}/boot.${FSIMAGE}
@mv ${RD}/kernels/BOOTMFS ${RD}/kernels/BOOTMFS.${FSIMAGE}
@cp ${RD}/kernels/BOOTMFS.${FSIMAGE} ${RD}/boot.${FSIMAGE}/kernel
@vnconfig /dev/vn0 fs-image.${FSIMAGE}
@mkdir -p /tmp/mnt_xx
@mount /dev/vn0 /tmp/mnt_xx
./dumpnlist ${RD}/boot.${FSIMAGE}/kernel > /tmp/mnt_xx/stand/symbols
@umount /tmp/mnt_xx
@vnconfig -u /dev/vn0
@rmdir /tmp/mnt_xx
./write_mfs_in_kernel ${RD}/boot.${FSIMAGE}/kernel \
fs-image.${FSIMAGE}
kzip -v ${RD}/boot.${FSIMAGE}/kernel
@mv ${RD}/boot.${FSIMAGE}/kernel ${RD}/kernels/MFSKERNEL.${FSIMAGE}
@mv ${RD}/boot.${FSIMAGE}/kernel.kz ${RD}/boot.${FSIMAGE}/kernel
@ls -l ${RD}/boot.${FSIMAGE}/kernel
@rm -f ${RD}/floppies/boot${FSIMAGE}.flp
cat /usr/mdec/rawboot ${RD}/boot.${FSIMAGE}/kernel | \
dd conv=sync of=${RD}/floppies/boot${FSIMAGE}.flp
@echo 'USERCONFIG' > startup_foo
@echo 'intro' >> startup_foo
@echo 'visual' >> startup_foo
dd if=startup_foo of=${RD}/floppies/boot${FSIMAGE}.flp \
seek=1 bs=512 count=1 conv=sync
@rm -f startup_foo
.include <bsd.prog.mk>