freebsd-dev/sys/mips/conf/AP93.hints
2017-05-29 07:57:01 +00:00

140 lines
3.3 KiB
Plaintext

# $FreeBSD$
# arge0 MDIO bus
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
# arge1 MDIO bus doesn't exist on the AR7240
# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
# MDIO bus.
# hint.arge.0.eeprommac=0x83fe9ff0
hint.arge.0.phymask=0x10 # PHY 4
# hint.arge.0.miimode=2 # MII
hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus
hint.arge.0.eeprommac=0x1fff0000
# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
hint.arge.1.phymask=0x0
# hint.arge.1.miimode=1 # GMII
hint.arge.1.media=1000 # Force to 1000BaseTX/full
hint.arge.1.fduplex=1
hint.arge.1.eeprommac=0x1fff0006
#
# AR7240 switch config
#
hint.arswitch.0.at="mdio0"
hint.arswitch.0.is_7240=1 # We need to be explicitly told this
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3)
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY
hint.arswitch.0.is_rgmii=0 # No, not RGMII
hint.arswitch.0.is_gmii=0 # No, not GMII
# ath0 hint - pcie slot 0
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
# ath0 - eeprom comes from here
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
# Signal leds
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="sig1"
hint.gpioled.0.pins=0x0001 # pin 0
hint.gpioled.1.at="gpiobus0"
hint.gpioled.1.name="sig2"
hint.gpioled.1.pins=0x0002 # pin 1
hint.gpioled.2.at="gpiobus0"
hint.gpioled.2.name="sig3"
hint.gpioled.2.pins=0x0800 # pin 11
hint.gpioled.3.at="gpiobus0"
hint.gpioled.3.name="sig4"
hint.gpioled.3.pins=0x0080 # pin 7
# nvram mapping - XXX ?
hint.nvram.0.base=0x1f030000
hint.nvram.0.maxsize=0x2000
hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
hint.nvram.1.base=0x1f032000
hint.nvram.1.maxsize=0x4000
hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
# GEOM_MAP
#
# From my AP93 environment:
#
# 256k - uboot
# 256k - uboot-env
# 3072k - spare-rootfs
# 1024k - spare-uImage
# 3072k - rootfs
# 1024k - uImage
# 64k - mib0
# 64k - mib1
# 4096k - ct
# 3392k - var
# 64k - ART
# To make it useful for FreeBSD for now, treat spare rootfs, spare
# uimage and rootfs as 'rootfs'.
hint.map.0.at="flash/spi0"
hint.map.0.start=0x00000000
hint.map.0.end=0x00040000
hint.map.0.name="uboot"
hint.map.0.readonly=1
hint.map.1.at="flash/spi0"
hint.map.1.start=0x00040000
hint.map.1.end=0x00080000
hint.map.1.name="uboot-env"
hint.map.1.readonly=1
hint.map.2.at="flash/spi0"
hint.map.2.start=0x00080000
hint.map.2.end="search:0x00080000:0x10000:.!/bin/sh"
hint.map.2.name="kernel"
hint.map.2.readonly=0
hint.map.3.at="flash/spi0"
hint.map.3.start="search:0x00080000:0x10000:.!/bin/sh"
hint.map.3.end=0x00880000
hint.map.3.name="rootfs"
hint.map.3.readonly=0
hint.map.4.at="flash/spi0"
hint.map.4.start=0x00880000
hint.map.4.end=0x00890000
# hint.map.4.name="mib0"
hint.map.4.name="cfg"
# hint.map.4.readonly=1
hint.map.5.at="flash/spi0"
hint.map.5.start=0x00890000
hint.map.5.end=0x008a0000
hint.map.5.name="mib1"
hint.map.5.readonly=1
hint.map.6.at="flash/spi0"
hint.map.6.start=0x008a0000
hint.map.6.end=0x00ca0000
hint.map.6.name="ct"
hint.map.6.readonly=1
hint.map.7.at="flash/spi0"
hint.map.7.start=0x00ca0000
hint.map.7.end=0x00ff0000
hint.map.7.name="var"
hint.map.7.readonly=1
hint.map.8.at="flash/spi0"
hint.map.8.start=0x00ff0000
hint.map.8.end=0x01000000 # 64k ART
hint.map.8.name="ART"
hint.map.8.readonly=1