freebsd-dev/sys/mips/conf/RSPRO.hints
Aleksandr Rybalko c11de6f059 Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards.
Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (menthor)
2012-11-07 22:46:30 +00:00

50 lines
1.2 KiB
Plaintext

# $FreeBSD$
# arge0 mdio bus
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
# arge0: dedicated switch port
hint.arge.0.phymask=0x10 # PHY4
hint.arge.0.miimode=3 # RGMII
hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
# arge1: nail to 1000/full, RGMII - connected to the switch
hint.arge.1.media=1000 # Map to 1000/full
hint.arge.1.fduplex=1 #
hint.arge.1.phymask=0x0 # no directly mapped PHYs
hint.arge.1.miimode=3 # RGMII
hint.arswitch.0.at="mdio0"
hint.arswitch.0.is_7240=0
hint.arswitch.0.numphys=4
hint.arswitch.0.phy4cpu=1
hint.arswitch.0.is_rgmii=1
hint.arswitch.0.is_gmii=0
# Don't flip on anything that isn't already enabled.
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
# not used here.
hint.gpio.0.function_set=0x00000000
hint.gpio.0.function_clear=0x00000000
# These are the GPIO LEDs and buttons which can be software controlled.
hint.gpio.0.pinmask=0x000000ff
# GPIO 0: Pin 1
# GPIO 1: Pin 2
# GPIO 2: RF LED
# GPIO 3: Pin 3
# GPIO 4: Pin 4
# GPIO 5: Pin 5
# GPIO 6: Pin 6
# GPIO 7: Pin 7
# RF led
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="rf"
# pin 2
hint.gpioled.0.pins=0x0004