freebsd-dev/sys/dev/ppbus/ppb_msq.c
David E. O'Brien aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00

340 lines
7.6 KiB
C

/*-
* Copyright (c) 1998, 1999 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <machine/stdarg.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <dev/ppbus/ppbconf.h>
#include <dev/ppbus/ppb_msq.h>
#include "ppbus_if.h"
/* msq index (see PPB_MAX_XFER)
* These are device modes
*/
#define COMPAT_MSQ 0x0
#define NIBBLE_MSQ 0x1
#define PS2_MSQ 0x2
#define EPP17_MSQ 0x3
#define EPP19_MSQ 0x4
#define ECP_MSQ 0x5
/*
* Device mode to submsq conversion
*/
static struct ppb_xfer *
mode2xfer(device_t bus, struct ppb_device *ppbdev, int opcode)
{
int index, epp;
struct ppb_xfer *table;
switch (opcode) {
case MS_OP_GET:
table = ppbdev->get_xfer;
break;
case MS_OP_PUT:
table = ppbdev->put_xfer;
break;
default:
panic("%s: unknown opcode (%d)", __func__, opcode);
}
/* retrieve the device operating mode */
switch (ppb_get_mode(bus)) {
case PPB_COMPATIBLE:
index = COMPAT_MSQ;
break;
case PPB_NIBBLE:
index = NIBBLE_MSQ;
break;
case PPB_PS2:
index = PS2_MSQ;
break;
case PPB_EPP:
switch ((epp = ppb_get_epp_protocol(bus))) {
case EPP_1_7:
index = EPP17_MSQ;
break;
case EPP_1_9:
index = EPP19_MSQ;
break;
default:
panic("%s: unknown EPP protocol (0x%x)!", __func__,
epp);
}
break;
case PPB_ECP:
index = ECP_MSQ;
break;
default:
panic("%s: unknown mode (%d)", __func__, ppbdev->mode);
}
return (&table[index]);
}
/*
* ppb_MS_init()
*
* Initialize device dependent submicrosequence of the current mode
*
*/
int
ppb_MS_init(device_t bus, device_t dev, struct ppb_microseq *loop, int opcode)
{
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
struct ppb_xfer *xfer = mode2xfer(bus, ppbdev, opcode);
xfer->loop = loop;
return (0);
}
/*
* ppb_MS_exec()
*
* Execute any microsequence opcode - expensive
*
*/
int
ppb_MS_exec(device_t bus, device_t dev, int opcode, union ppb_insarg param1,
union ppb_insarg param2, union ppb_insarg param3, int *ret)
{
struct ppb_microseq msq[] = {
{ MS_UNKNOWN, { { MS_UNKNOWN }, { MS_UNKNOWN }, { MS_UNKNOWN } } },
MS_RET(0)
};
/* initialize the corresponding microseq */
msq[0].opcode = opcode;
msq[0].arg[0] = param1;
msq[0].arg[1] = param2;
msq[0].arg[2] = param3;
/* execute the microseq */
return (ppb_MS_microseq(bus, dev, msq, ret));
}
/*
* ppb_MS_loop()
*
* Execute a microseq loop
*
*/
int
ppb_MS_loop(device_t bus, device_t dev, struct ppb_microseq *prolog,
struct ppb_microseq *body, struct ppb_microseq *epilog,
int iter, int *ret)
{
struct ppb_microseq loop_microseq[] = {
MS_CALL(0), /* execute prolog */
MS_SET(MS_UNKNOWN), /* set size of transfer */
/* loop: */
MS_CALL(0), /* execute body */
MS_DBRA(-1 /* loop: */),
MS_CALL(0), /* execute epilog */
MS_RET(0)
};
/* initialize the structure */
loop_microseq[0].arg[0].p = (void *)prolog;
loop_microseq[1].arg[0].i = iter;
loop_microseq[2].arg[0].p = (void *)body;
loop_microseq[4].arg[0].p = (void *)epilog;
/* execute the loop */
return (ppb_MS_microseq(bus, dev, loop_microseq, ret));
}
/*
* ppb_MS_init_msq()
*
* Initialize a microsequence - see macros in ppb_msq.h
*
*/
int
ppb_MS_init_msq(struct ppb_microseq *msq, int nbparam, ...)
{
int i;
int param, ins, arg, type;
va_list p_list;
va_start(p_list, nbparam);
for (i=0; i<nbparam; i++) {
/* retrieve the parameter descriptor */
param = va_arg(p_list, int);
ins = MS_INS(param);
arg = MS_ARG(param);
type = MS_TYP(param);
/* check the instruction position */
if (arg >= PPB_MS_MAXARGS)
panic("%s: parameter out of range (0x%x)!",
__func__, param);
#if 0
printf("%s: param = %d, ins = %d, arg = %d, type = %d\n",
__func__, param, ins, arg, type);
#endif
/* properly cast the parameter */
switch (type) {
case MS_TYP_INT:
msq[ins].arg[arg].i = va_arg(p_list, int);
break;
case MS_TYP_CHA:
msq[ins].arg[arg].i = (int)va_arg(p_list, int);
break;
case MS_TYP_PTR:
msq[ins].arg[arg].p = va_arg(p_list, void *);
break;
case MS_TYP_FUN:
msq[ins].arg[arg].f = va_arg(p_list, void *);
break;
default:
panic("%s: unknown parameter (0x%x)!", __func__,
param);
}
}
return (0);
}
/*
* ppb_MS_microseq()
*
* Interprete a microsequence. Some microinstructions are executed at adapter
* level to avoid function call overhead between ppbus and the adapter
*/
int
ppb_MS_microseq(device_t bus, device_t dev, struct ppb_microseq *msq, int *ret)
{
struct ppb_data *ppb = (struct ppb_data *)device_get_softc(bus);
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
struct ppb_microseq *mi; /* current microinstruction */
int error;
struct ppb_xfer *xfer;
/* microsequence executed to initialize the transfer */
struct ppb_microseq initxfer[] = {
MS_PTR(MS_UNKNOWN), /* set ptr to buffer */
MS_SET(MS_UNKNOWN), /* set transfer size */
MS_RET(0)
};
if (ppb->ppb_owner != dev)
return (EACCES);
#define INCR_PC (mi ++)
mi = msq;
for (;;) {
switch (mi->opcode) {
case MS_OP_PUT:
case MS_OP_GET:
/* attempt to choose the best mode for the device */
xfer = mode2xfer(bus, ppbdev, mi->opcode);
/* figure out if we should use ieee1284 code */
if (!xfer->loop) {
if (mi->opcode == MS_OP_PUT) {
if ((error = PPBUS_WRITE(
device_get_parent(bus),
(char *)mi->arg[0].p,
mi->arg[1].i, 0)))
goto error;
INCR_PC;
goto next;
} else
panic("%s: IEEE1284 read not supported", __func__);
}
/* XXX should use ppb_MS_init_msq() */
initxfer[0].arg[0].p = mi->arg[0].p;
initxfer[1].arg[0].i = mi->arg[1].i;
/* initialize transfer */
ppb_MS_microseq(bus, dev, initxfer, &error);
if (error)
goto error;
/* the xfer microsequence should not contain any
* MS_OP_PUT or MS_OP_GET!
*/
ppb_MS_microseq(bus, dev, xfer->loop, &error);
if (error)
goto error;
INCR_PC;
break;
case MS_OP_RET:
if (ret)
*ret = mi->arg[0].i; /* return code */
return (0);
break;
default:
/* executing microinstructions at ppc level is
* faster. This is the default if the microinstr
* is unknown here
*/
if ((error = PPBUS_EXEC_MICROSEQ(
device_get_parent(bus), &mi)))
goto error;
break;
}
next:
continue;
}
error:
return (error);
}