917721a495
the larger, aligned write+erase sizes the driver currently implements. This preserves write behaviour but makes the flash driver usable for things like a read-only FFS or a geom_uzip/geom_compress . Note that since GEOM will now return the sector size as being smaller, writes of sector size/alignment will now fail with an EIO. Code which writes to the flash device will have to be (for now) manually taught about the flash write blocksize.
490 lines
12 KiB
C
490 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
|
|
* Copyright (c) 2009 Oleksandr Tymoshenko. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <geom/geom_disk.h>
|
|
|
|
#include <dev/spibus/spi.h>
|
|
#include "spibus_if.h"
|
|
|
|
#include <dev/flash/mx25lreg.h>
|
|
|
|
#define FL_NONE 0x00
|
|
#define FL_ERASE_4K 0x01
|
|
#define FL_ERASE_32K 0x02
|
|
|
|
/*
|
|
* Define the sectorsize to be a smaller size rather than the flash
|
|
* sector size. Trying to run FFS off of a 64k flash sector size
|
|
* results in a completely un-usable system.
|
|
*/
|
|
#define MX25L_SECTORSIZE 512
|
|
|
|
struct mx25l_flash_ident
|
|
{
|
|
const char *name;
|
|
uint8_t manufacturer_id;
|
|
uint16_t device_id;
|
|
unsigned int sectorsize;
|
|
unsigned int sectorcount;
|
|
unsigned int flags;
|
|
};
|
|
|
|
struct mx25l_softc
|
|
{
|
|
device_t sc_dev;
|
|
uint8_t sc_manufacturer_id;
|
|
uint16_t sc_device_id;
|
|
unsigned int sc_sectorsize;
|
|
struct mtx sc_mtx;
|
|
struct disk *sc_disk;
|
|
struct proc *sc_p;
|
|
struct bio_queue_head sc_bio_queue;
|
|
unsigned int sc_flags;
|
|
};
|
|
|
|
#define M25PXX_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
|
|
#define M25PXX_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
|
|
#define M25PXX_LOCK_INIT(_sc) \
|
|
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
|
|
"mx25l", MTX_DEF)
|
|
#define M25PXX_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
|
|
#define M25PXX_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
|
|
#define M25PXX_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
|
|
|
|
/* disk routines */
|
|
static int mx25l_open(struct disk *dp);
|
|
static int mx25l_close(struct disk *dp);
|
|
static int mx25l_ioctl(struct disk *, u_long, void *, int, struct thread *);
|
|
static void mx25l_strategy(struct bio *bp);
|
|
static void mx25l_task(void *arg);
|
|
|
|
struct mx25l_flash_ident flash_devices[] = {
|
|
{ "mx25ll32", 0xc2, 0x2016, 64 * 1024, 64, FL_NONE },
|
|
{ "m25p64", 0x20, 0x2017, 64 * 1024, 128, FL_NONE },
|
|
{ "mx25ll64", 0xc2, 0x2017, 64 * 1024, 128, FL_NONE },
|
|
{ "mx25ll128", 0xc2, 0x2018, 64 * 1024, 256, FL_ERASE_4K | FL_ERASE_32K },
|
|
{ "s25fl128", 0x01, 0x2018, 64 * 1024, 256, FL_NONE },
|
|
{ "s25sl064a", 0x01, 0x0216, 64 * 1024, 128, FL_NONE },
|
|
};
|
|
|
|
static uint8_t
|
|
mx25l_get_status(device_t dev)
|
|
{
|
|
uint8_t txBuf[2], rxBuf[2];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = CMD_READ_STATUS;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 2;
|
|
cmd.tx_cmd_sz = 2;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
return (rxBuf[1]);
|
|
}
|
|
|
|
static void
|
|
mx25l_wait_for_device_ready(device_t dev)
|
|
{
|
|
while ((mx25l_get_status(dev) & STATUS_WIP))
|
|
continue;
|
|
}
|
|
|
|
static struct mx25l_flash_ident*
|
|
mx25l_get_device_ident(struct mx25l_softc *sc)
|
|
{
|
|
device_t dev = sc->sc_dev;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
uint8_t manufacturer_id;
|
|
uint16_t dev_id;
|
|
int err, i;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = CMD_READ_IDENT;
|
|
cmd.tx_cmd = &txBuf;
|
|
cmd.rx_cmd = &rxBuf;
|
|
/*
|
|
* Some compatible devices has extended two-bytes ID
|
|
* We'll use only manufacturer/deviceid atm
|
|
*/
|
|
cmd.tx_cmd_sz = 4;
|
|
cmd.rx_cmd_sz = 4;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
if (err)
|
|
return (NULL);
|
|
|
|
manufacturer_id = rxBuf[1];
|
|
dev_id = (rxBuf[2] << 8) | (rxBuf[3]);
|
|
|
|
for (i = 0;
|
|
i < sizeof(flash_devices)/sizeof(struct mx25l_flash_ident); i++) {
|
|
if ((flash_devices[i].manufacturer_id == manufacturer_id) &&
|
|
(flash_devices[i].device_id == dev_id))
|
|
return &flash_devices[i];
|
|
}
|
|
|
|
printf("Unknown SPI flash device. Vendor: %02x, device id: %04x\n",
|
|
manufacturer_id, dev_id);
|
|
return (NULL);
|
|
}
|
|
|
|
static void
|
|
mx25l_set_writable(device_t dev, int writable)
|
|
{
|
|
uint8_t txBuf[1], rxBuf[1];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = writable ? CMD_WRITE_ENABLE : CMD_WRITE_DISABLE;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 1;
|
|
cmd.tx_cmd_sz = 1;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
}
|
|
|
|
static void
|
|
mx25l_erase_cmd(device_t dev, off_t sector, uint8_t ecmd)
|
|
{
|
|
uint8_t txBuf[4], rxBuf[4];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
mx25l_wait_for_device_ready(dev);
|
|
mx25l_set_writable(dev, 1);
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = ecmd;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 4;
|
|
cmd.tx_cmd_sz = 4;
|
|
txBuf[1] = ((sector >> 16) & 0xff);
|
|
txBuf[2] = ((sector >> 8) & 0xff);
|
|
txBuf[3] = (sector & 0xff);
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
}
|
|
|
|
static int
|
|
mx25l_write(device_t dev, off_t offset, caddr_t data, off_t count)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
off_t write_offset;
|
|
long bytes_to_write, bytes_writen;
|
|
device_t pdev;
|
|
int err = 0;
|
|
|
|
pdev = device_get_parent(dev);
|
|
sc = device_get_softc(dev);
|
|
|
|
cmd.tx_cmd_sz = 4;
|
|
cmd.rx_cmd_sz = 4;
|
|
|
|
bytes_writen = 0;
|
|
write_offset = offset;
|
|
|
|
/*
|
|
* Use the erase sectorsize here since blocks are fully erased
|
|
* first before they're written to.
|
|
*/
|
|
if (count % sc->sc_sectorsize != 0 || offset % sc->sc_sectorsize != 0)
|
|
return (EIO);
|
|
|
|
/*
|
|
* Assume here that we write per-sector only
|
|
* and sector size should be 256 bytes aligned
|
|
*/
|
|
KASSERT(write_offset % FLASH_PAGE_SIZE == 0,
|
|
("offset for BIO_WRITE is not page size (%d bytes) aligned",
|
|
FLASH_PAGE_SIZE));
|
|
|
|
/*
|
|
* Maximum write size for CMD_PAGE_PROGRAM is
|
|
* FLASH_PAGE_SIZE, so split data to chunks
|
|
* FLASH_PAGE_SIZE bytes eash and write them
|
|
* one by one
|
|
*/
|
|
while (bytes_writen < count) {
|
|
/*
|
|
* If we crossed sector boundary - erase next sector
|
|
*/
|
|
if (((offset + bytes_writen) % sc->sc_sectorsize) == 0)
|
|
mx25l_erase_cmd(dev, offset + bytes_writen, CMD_SECTOR_ERASE);
|
|
|
|
txBuf[0] = CMD_PAGE_PROGRAM;
|
|
txBuf[1] = ((write_offset >> 16) & 0xff);
|
|
txBuf[2] = ((write_offset >> 8) & 0xff);
|
|
txBuf[3] = (write_offset & 0xff);
|
|
|
|
bytes_to_write = MIN(FLASH_PAGE_SIZE,
|
|
count - bytes_writen);
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.tx_data = data + bytes_writen;
|
|
cmd.tx_data_sz = bytes_to_write;
|
|
cmd.rx_data = data + bytes_writen;
|
|
cmd.rx_data_sz = bytes_to_write;
|
|
|
|
/*
|
|
* Eash completed write operation resets WEL
|
|
* (write enable latch) to disabled state,
|
|
* so we re-enable it here
|
|
*/
|
|
mx25l_wait_for_device_ready(dev);
|
|
mx25l_set_writable(dev, 1);
|
|
|
|
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
|
if (err)
|
|
break;
|
|
|
|
bytes_writen += bytes_to_write;
|
|
write_offset += bytes_to_write;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mx25l_read(device_t dev, off_t offset, caddr_t data, off_t count)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
device_t pdev;
|
|
int err = 0;
|
|
|
|
pdev = device_get_parent(dev);
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* Enforce the disk read sectorsize not the erase sectorsize.
|
|
* In this way, smaller read IO is possible,dramatically
|
|
* speeding up filesystem/geom_compress access.
|
|
*/
|
|
if (count % sc->sc_disk->d_sectorsize != 0
|
|
|| offset % sc->sc_disk->d_sectorsize != 0)
|
|
return (EIO);
|
|
|
|
txBuf[0] = CMD_FAST_READ;
|
|
cmd.tx_cmd_sz = 5;
|
|
cmd.rx_cmd_sz = 5;
|
|
|
|
txBuf[1] = ((offset >> 16) & 0xff);
|
|
txBuf[2] = ((offset >> 8) & 0xff);
|
|
txBuf[3] = (offset & 0xff);
|
|
/* Dummy byte */
|
|
txBuf[4] = 0;
|
|
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.tx_data = data;
|
|
cmd.tx_data_sz = count;
|
|
cmd.rx_data = data;
|
|
cmd.rx_data_sz = count;
|
|
|
|
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mx25l_probe(device_t dev)
|
|
{
|
|
device_set_desc(dev, "M25Pxx Flash Family");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_attach(device_t dev)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
struct mx25l_flash_ident *ident;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
M25PXX_LOCK_INIT(sc);
|
|
|
|
ident = mx25l_get_device_ident(sc);
|
|
if (ident == NULL)
|
|
return (ENXIO);
|
|
|
|
mx25l_wait_for_device_ready(sc->sc_dev);
|
|
|
|
sc->sc_disk = disk_alloc();
|
|
sc->sc_disk->d_open = mx25l_open;
|
|
sc->sc_disk->d_close = mx25l_close;
|
|
sc->sc_disk->d_strategy = mx25l_strategy;
|
|
sc->sc_disk->d_ioctl = mx25l_ioctl;
|
|
sc->sc_disk->d_name = "flash/spi";
|
|
sc->sc_disk->d_drv1 = sc;
|
|
sc->sc_disk->d_maxsize = DFLTPHYS;
|
|
sc->sc_disk->d_sectorsize = MX25L_SECTORSIZE;
|
|
sc->sc_disk->d_mediasize = ident->sectorsize * ident->sectorcount;
|
|
sc->sc_disk->d_unit = device_get_unit(sc->sc_dev);
|
|
sc->sc_disk->d_dump = NULL; /* NB: no dumps */
|
|
/* Sectorsize for erase operations */
|
|
sc->sc_sectorsize = ident->sectorsize;
|
|
sc->sc_flags = ident->flags;
|
|
|
|
/* NB: use stripesize to hold the erase/region size for RedBoot */
|
|
sc->sc_disk->d_stripesize = ident->sectorsize;
|
|
|
|
disk_create(sc->sc_disk, DISK_VERSION);
|
|
bioq_init(&sc->sc_bio_queue);
|
|
|
|
kproc_create(&mx25l_task, sc, &sc->sc_p, 0, 0, "task: mx25l flash");
|
|
device_printf(sc->sc_dev, "%s, sector %d bytes, %d sectors\n",
|
|
ident->name, ident->sectorsize, ident->sectorcount);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_detach(device_t dev)
|
|
{
|
|
|
|
return (EIO);
|
|
}
|
|
|
|
static int
|
|
mx25l_open(struct disk *dp)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_close(struct disk *dp)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_ioctl(struct disk *dp, u_long cmd, void *data, int fflag,
|
|
struct thread *td)
|
|
{
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static void
|
|
mx25l_strategy(struct bio *bp)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
|
|
sc = (struct mx25l_softc *)bp->bio_disk->d_drv1;
|
|
M25PXX_LOCK(sc);
|
|
bioq_disksort(&sc->sc_bio_queue, bp);
|
|
wakeup(sc);
|
|
M25PXX_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
mx25l_task(void *arg)
|
|
{
|
|
struct mx25l_softc *sc = (struct mx25l_softc*)arg;
|
|
struct bio *bp;
|
|
device_t dev;
|
|
|
|
for (;;) {
|
|
dev = sc->sc_dev;
|
|
M25PXX_LOCK(sc);
|
|
do {
|
|
bp = bioq_first(&sc->sc_bio_queue);
|
|
if (bp == NULL)
|
|
msleep(sc, &sc->sc_mtx, PRIBIO, "jobqueue", 0);
|
|
} while (bp == NULL);
|
|
bioq_remove(&sc->sc_bio_queue, bp);
|
|
M25PXX_UNLOCK(sc);
|
|
|
|
switch (bp->bio_cmd) {
|
|
case BIO_READ:
|
|
bp->bio_error = mx25l_read(dev, bp->bio_offset,
|
|
bp->bio_data, bp->bio_bcount);
|
|
break;
|
|
case BIO_WRITE:
|
|
bp->bio_error = mx25l_write(dev, bp->bio_offset,
|
|
bp->bio_data, bp->bio_bcount);
|
|
break;
|
|
default:
|
|
bp->bio_error = EINVAL;
|
|
}
|
|
|
|
|
|
biodone(bp);
|
|
}
|
|
}
|
|
|
|
static devclass_t mx25l_devclass;
|
|
|
|
static device_method_t mx25l_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mx25l_probe),
|
|
DEVMETHOD(device_attach, mx25l_attach),
|
|
DEVMETHOD(device_detach, mx25l_detach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t mx25l_driver = {
|
|
"mx25l",
|
|
mx25l_methods,
|
|
sizeof(struct mx25l_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(mx25l, spibus, mx25l_driver, mx25l_devclass, 0, 0);
|