freebsd-dev/sys/gnu/fs/ext2fs/ext2_bmap.c
Alan Cox 4221e284a3 The VFS/BIO subsystem contained a number of hacks in order to optimize
piecemeal, middle-of-file writes for NFS.  These hacks have caused no
end of trouble, especially when combined with mmap().  I've removed
them.  Instead, NFS will issue a read-before-write to fully
instantiate the struct buf containing the write.  NFS does, however,
optimize piecemeal appends to files.  For most common file operations,
you will not notice the difference.  The sole remaining fragment in
the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache
coherency issues with read-merge-write style operations.  NFS also
optimizes the write-covers-entire-buffer case by avoiding the
read-before-write.  There is quite a bit of room for further
optimization in these areas.

The VM system marks pages fully-valid (AKA vm_page_t->valid =
VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault.  This
is not correct operation.  The vm_pager_get_pages() code is now
responsible for marking VM pages all-valid.  A number of VM helper
routines have been added to aid in zeroing-out the invalid portions of
a VM page prior to the page being marked all-valid.  This operation is
necessary to properly support mmap().  The zeroing occurs most often
when dealing with file-EOF situations.  Several bugs have been fixed
in the NFS subsystem, including bits handling file and directory EOF
situations and buf->b_flags consistancy issues relating to clearing
B_ERROR & B_INVAL, and handling B_DONE.

getblk() and allocbuf() have been rewritten.  B_CACHE operation is now
formally defined in comments and more straightforward in
implementation.  B_CACHE for VMIO buffers is based on the validity of
the backing store.  B_CACHE for non-VMIO buffers is based simply on
whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear,
and vise-versa).  biodone() is now responsible for setting B_CACHE
when a successful read completes.  B_CACHE is also set when a bdwrite()
is initiated and when a bwrite() is initiated.  VFS VOP_BWRITE
routines (there are only two - nfs_bwrite() and bwrite()) are now
expected to set B_CACHE.  This means that bowrite() and bawrite() also
set B_CACHE indirectly.

There are a number of places in the code which were previously using
buf->b_bufsize (which is DEV_BSIZE aligned) when they should have
been using buf->b_bcount.  These have been fixed.  getblk() now clears
B_DONE on return because the rest of the system is so bad about
dealing with B_DONE.

Major fixes to NFS/TCP have been made.  A server-side bug could cause
requests to be lost by the server due to nfs_realign() overwriting
other rpc's in the same TCP mbuf chain.  The server's kernel must be
recompiled to get the benefit of the fixes.

Submitted by:	Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00

356 lines
10 KiB
C

/*
* Copyright (c) 1989, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_bmap.c 8.7 (Berkeley) 3/21/95
* $Id: ufs_bmap.c,v 1.25 1999/01/28 00:57:55 dillon Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/resourcevar.h>
#include <sys/conf.h>
#include <ufs/ufs/quota.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/ufs_extern.h>
#include <miscfs/specfs/specdev.h>
/*
* Bmap converts a the logical block number of a file to its physical block
* number on the disk. The conversion is done by using the logical block
* number to index into the array of block pointers described by the dinode.
*/
int
ufs_bmap(ap)
struct vop_bmap_args /* {
struct vnode *a_vp;
ufs_daddr_t a_bn;
struct vnode **a_vpp;
ufs_daddr_t *a_bnp;
int *a_runp;
int *a_runb;
} */ *ap;
{
/*
* Check for underlying vnode requests and ensure that logical
* to physical mapping is requested.
*/
if (ap->a_vpp != NULL)
*ap->a_vpp = VTOI(ap->a_vp)->i_devvp;
if (ap->a_bnp == NULL)
return (0);
return (ufs_bmaparray(ap->a_vp, ap->a_bn, ap->a_bnp, NULL, NULL,
ap->a_runp, ap->a_runb));
}
/*
* Indirect blocks are now on the vnode for the file. They are given negative
* logical block numbers. Indirect blocks are addressed by the negative
* address of the first data block to which they point. Double indirect blocks
* are addressed by one less than the address of the first indirect block to
* which they point. Triple indirect blocks are addressed by one less than
* the address of the first double indirect block to which they point.
*
* ufs_bmaparray does the bmap conversion, and if requested returns the
* array of logical blocks which must be traversed to get to a block.
* Each entry contains the offset into that block that gets you to the
* next block and the disk address of the block (if it is assigned).
*/
int
ufs_bmaparray(vp, bn, bnp, ap, nump, runp, runb)
struct vnode *vp;
ufs_daddr_t bn;
ufs_daddr_t *bnp;
struct indir *ap;
int *nump;
int *runp;
int *runb;
{
register struct inode *ip;
struct buf *bp;
struct ufsmount *ump;
struct mount *mp;
struct vnode *devvp;
struct indir a[NIADDR+1], *xap;
ufs_daddr_t daddr;
long metalbn;
int error, maxrun = 0, num;
ip = VTOI(vp);
mp = vp->v_mount;
ump = VFSTOUFS(mp);
#ifdef DIAGNOSTIC
if ((ap != NULL && nump == NULL) || (ap == NULL && nump != NULL))
panic("ufs_bmaparray: invalid arguments");
#endif
if (runp) {
*runp = 0;
}
if (runb) {
*runb = 0;
}
maxrun = 0;
if (runp || runb || (vp->v_maxio == 0)) {
struct vnode *devvp;
int blksize;
blksize = mp->mnt_stat.f_iosize;
/*
* XXX
* If MAXPHYS is the largest transfer the disks can handle,
* we probably want maxrun to be 1 block less so that we
* don't create a block larger than the device can handle.
*/
devvp = ip->i_devvp;
if (devvp != NULL && devvp->v_tag != VT_MFS &&
devvp->v_type == VBLK) {
if (bdevsw[major(devvp->v_rdev)]->d_maxio > MAXPHYS) {
maxrun = MAXPHYS;
vp->v_maxio = MAXPHYS;
} else {
maxrun = bdevsw[major(devvp->v_rdev)]->d_maxio;
vp->v_maxio = bdevsw[major(devvp->v_rdev)]->d_maxio;
}
maxrun = maxrun / blksize;
maxrun -= 1;
}
if (maxrun <= 0) {
vp->v_maxio = DFLTPHYS;
maxrun = DFLTPHYS / blksize;
maxrun -= 1;
}
}
xap = ap == NULL ? a : ap;
if (!nump)
nump = &num;
error = ufs_getlbns(vp, bn, xap, nump);
if (error)
return (error);
num = *nump;
if (num == 0) {
*bnp = blkptrtodb(ump, ip->i_db[bn]);
if (*bnp == 0)
*bnp = -1;
else if (runp) {
daddr_t bnb = bn;
for (++bn; bn < NDADDR && *runp < maxrun &&
is_sequential(ump, ip->i_db[bn - 1], ip->i_db[bn]);
++bn, ++*runp);
bn = bnb;
if (runb && (bn > 0)) {
for (--bn; (bn >= 0) && (*runb < maxrun) &&
is_sequential(ump, ip->i_db[bn],
ip->i_db[bn+1]);
--bn, ++*runb);
}
}
return (0);
}
/* Get disk address out of indirect block array */
daddr = ip->i_ib[xap->in_off];
devvp = VFSTOUFS(vp->v_mount)->um_devvp;
for (bp = NULL, ++xap; --num; ++xap) {
/*
* Exit the loop if there is no disk address assigned yet and
* the indirect block isn't in the cache, or if we were
* looking for an indirect block and we've found it.
*/
metalbn = xap->in_lbn;
if ((daddr == 0 && !incore(vp, metalbn)) || metalbn == bn)
break;
/*
* If we get here, we've either got the block in the cache
* or we have a disk address for it, go fetch it.
*/
if (bp)
bqrelse(bp);
xap->in_exists = 1;
bp = getblk(vp, metalbn, mp->mnt_stat.f_iosize, 0, 0);
if ((bp->b_flags & B_CACHE) == 0) {
#ifdef DIAGNOSTIC
if (!daddr)
panic("ufs_bmaparray: indirect block not in cache");
#endif
bp->b_blkno = blkptrtodb(ump, daddr);
bp->b_flags |= B_READ;
bp->b_flags &= ~(B_INVAL|B_ERROR);
vfs_busy_pages(bp, 0);
VOP_STRATEGY(bp->b_vp, bp);
curproc->p_stats->p_ru.ru_inblock++; /* XXX */
error = biowait(bp);
if (error) {
brelse(bp);
return (error);
}
}
daddr = ((ufs_daddr_t *)bp->b_data)[xap->in_off];
if (num == 1 && daddr && runp) {
for (bn = xap->in_off + 1;
bn < MNINDIR(ump) && *runp < maxrun &&
is_sequential(ump,
((ufs_daddr_t *)bp->b_data)[bn - 1],
((ufs_daddr_t *)bp->b_data)[bn]);
++bn, ++*runp);
bn = xap->in_off;
if (runb && bn) {
for(--bn; bn > 0 && *runb < maxrun &&
is_sequential(ump, ((daddr_t *)bp->b_data)[bn],
((daddr_t *)bp->b_data)[bn+1]);
--bn, ++*runb);
}
}
}
if (bp)
bqrelse(bp);
daddr = blkptrtodb(ump, daddr);
*bnp = daddr == 0 ? -1 : daddr;
return (0);
}
/*
* Create an array of logical block number/offset pairs which represent the
* path of indirect blocks required to access a data block. The first "pair"
* contains the logical block number of the appropriate single, double or
* triple indirect block and the offset into the inode indirect block array.
* Note, the logical block number of the inode single/double/triple indirect
* block appears twice in the array, once with the offset into the i_ib and
* once with the offset into the page itself.
*/
int
ufs_getlbns(vp, bn, ap, nump)
struct vnode *vp;
ufs_daddr_t bn;
struct indir *ap;
int *nump;
{
long blockcnt, metalbn, realbn;
struct ufsmount *ump;
int i, numlevels, off;
int64_t qblockcnt;
ump = VFSTOUFS(vp->v_mount);
if (nump)
*nump = 0;
numlevels = 0;
realbn = bn;
if ((long)bn < 0)
bn = -(long)bn;
/* The first NDADDR blocks are direct blocks. */
if (bn < NDADDR)
return (0);
/*
* Determine the number of levels of indirection. After this loop
* is done, blockcnt indicates the number of data blocks possible
* at the previous level of indirection, and NIADDR - i is the number
* of levels of indirection needed to locate the requested block.
*/
for (blockcnt = 1, i = NIADDR, bn -= NDADDR;; i--, bn -= blockcnt) {
if (i == 0)
return (EFBIG);
/*
* Use int64_t's here to avoid overflow for triple indirect
* blocks when longs have 32 bits and the block size is more
* than 4K.
*/
qblockcnt = (int64_t)blockcnt * MNINDIR(ump);
if (bn < qblockcnt)
break;
blockcnt = qblockcnt;
}
/* Calculate the address of the first meta-block. */
if (realbn >= 0)
metalbn = -(realbn - bn + NIADDR - i);
else
metalbn = -(-realbn - bn + NIADDR - i);
/*
* At each iteration, off is the offset into the bap array which is
* an array of disk addresses at the current level of indirection.
* The logical block number and the offset in that block are stored
* into the argument array.
*/
ap->in_lbn = metalbn;
ap->in_off = off = NIADDR - i;
ap->in_exists = 0;
ap++;
for (++numlevels; i <= NIADDR; i++) {
/* If searching for a meta-data block, quit when found. */
if (metalbn == realbn)
break;
off = (bn / blockcnt) % MNINDIR(ump);
++numlevels;
ap->in_lbn = metalbn;
ap->in_off = off;
ap->in_exists = 0;
++ap;
metalbn -= -1 + off * blockcnt;
blockcnt /= MNINDIR(ump);
}
if (nump)
*nump = numlevels;
return (0);
}