freebsd-dev/sys/dev/ppbus/lpt.c
Julian Elischer b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

975 lines
25 KiB
C

/*
* Copyright (c) 1990 William F. Jolitz, TeleMuse
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This software is a component of "386BSD" developed by
* William F. Jolitz, TeleMuse.
* 4. Neither the name of the developer nor the name "386BSD"
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
* AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
* SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
* THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
* NOT MAKE USE OF THIS WORK.
*
* FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
* BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
* REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES
* (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
* JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
* LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
* ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
* OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: unknown origin, 386BSD 0.1
* From Id: lpt.c,v 1.55.2.1 1996/11/12 09:08:38 phk Exp
* From Id: nlpt.c,v 1.14 1999/02/08 13:55:43 des Exp
* $FreeBSD$
*/
/*
* Device Driver for AT parallel printer port
* Written by William Jolitz 12/18/90
*/
/*
* Updated for ppbus by Nicolas Souchu
* [Mon Jul 28 1997]
*/
#include "opt_lpt.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/uio.h>
#include <sys/syslog.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <dev/ppbus/lptio.h>
#include <dev/ppbus/ppbconf.h>
#include <dev/ppbus/ppb_1284.h>
#include <dev/ppbus/lpt.h>
#include "ppbus_if.h"
#include <dev/ppbus/ppbio.h>
#ifndef LPT_DEBUG
#define lprintf(args)
#else
#define lprintf(args) \
do { \
if (lptflag) \
printf args; \
} while (0)
static int volatile lptflag = 1;
#endif
#define LPINITRDY 4 /* wait up to 4 seconds for a ready */
#define LPTOUTINITIAL 10 /* initial timeout to wait for ready 1/10 s */
#define LPTOUTMAX 1 /* maximal timeout 1 s */
#define LPPRI (PZERO+8)
#define BUFSIZE 1024
#define BUFSTATSIZE 32
#define LPTUNIT(s) ((s)&0x03)
#define LPTFLAGS(s) ((s)&0xfc)
struct lpt_data {
short sc_state;
/* default case: negative prime, negative ack, handshake strobe,
prime once */
u_char sc_control;
char sc_flags;
#define LP_POS_INIT 0x04 /* if we are a postive init signal */
#define LP_POS_ACK 0x08 /* if we are a positive going ack */
#define LP_NO_PRIME 0x10 /* don't prime the printer at all */
#define LP_PRIMEOPEN 0x20 /* prime on every open */
#define LP_AUTOLF 0x40 /* tell printer to do an automatic lf */
#define LP_BYPASS 0x80 /* bypass printer ready checks */
void *sc_inbuf;
void *sc_statbuf;
short sc_xfercnt ;
char sc_primed;
char *sc_cp ;
u_short sc_irq ; /* IRQ status of port */
#define LP_HAS_IRQ 0x01 /* we have an irq available */
#define LP_USE_IRQ 0x02 /* we are using our irq */
#define LP_ENABLE_IRQ 0x04 /* enable IRQ on open */
#define LP_ENABLE_EXT 0x10 /* we shall use advanced mode when possible */
u_char sc_backoff ; /* time to call lptout() again */
struct resource *intr_resource; /* interrupt resource */
void *intr_cookie; /* interrupt registration cookie */
};
#define LPT_NAME "lpt" /* our official name */
static timeout_t lptout;
static int lpt_port_test(device_t dev, u_char data, u_char mask);
static int lpt_detect(device_t dev);
#define DEVTOSOFTC(dev) \
((struct lpt_data *)device_get_softc(dev))
#define UNITOSOFTC(unit) \
((struct lpt_data *)devclass_get_softc(lpt_devclass, (unit)))
#define UNITODEVICE(unit) \
(devclass_get_device(lpt_devclass, (unit)))
static void lptintr(device_t dev);
static void lpt_intr(void *arg); /* without spls */
static devclass_t lpt_devclass;
/* bits for state */
#define OPEN (1<<0) /* device is open */
#define ASLP (1<<1) /* awaiting draining of printer */
#define EERROR (1<<2) /* error was received from printer */
#define OBUSY (1<<3) /* printer is busy doing output */
#define LPTOUT (1<<4) /* timeout while not selected */
#define TOUT (1<<5) /* timeout while not selected */
#define LPTINIT (1<<6) /* waiting to initialize for open */
#define INTERRUPTED (1<<7) /* write call was interrupted */
#define HAVEBUS (1<<8) /* the driver owns the bus */
/* status masks to interrogate printer status */
#define RDY_MASK (LPS_SEL|LPS_OUT|LPS_NBSY|LPS_NERR) /* ready ? */
#define LP_READY (LPS_SEL|LPS_NBSY|LPS_NERR)
/* Printer Ready condition - from lpa.c */
/* Only used in polling code */
#define LPS_INVERT (LPS_NBSY | LPS_NACK | LPS_SEL | LPS_NERR)
#define LPS_MASK (LPS_NBSY | LPS_NACK | LPS_OUT | LPS_SEL | LPS_NERR)
#define NOT_READY(ppbus) ((ppb_rstr(ppbus)^LPS_INVERT)&LPS_MASK)
#define MAX_SLEEP (hz*5) /* Timeout while waiting for device ready */
#define MAX_SPIN 20 /* Max delay for device ready in usecs */
static d_open_t lptopen;
static d_close_t lptclose;
static d_write_t lptwrite;
static d_read_t lptread;
static d_ioctl_t lptioctl;
#define CDEV_MAJOR 16
static struct cdevsw lpt_cdevsw = {
/* open */ lptopen,
/* close */ lptclose,
/* read */ lptread,
/* write */ lptwrite,
/* ioctl */ lptioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ LPT_NAME,
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
};
static int
lpt_request_ppbus(device_t dev, int how)
{
device_t ppbus = device_get_parent(dev);
struct lpt_data *sc = DEVTOSOFTC(dev);
int error;
if (sc->sc_state & HAVEBUS)
return (0);
/* we have the bus only if the request succeded */
if ((error = ppb_request_bus(ppbus, dev, how)) == 0)
sc->sc_state |= HAVEBUS;
return (error);
}
static int
lpt_release_ppbus(device_t dev)
{
device_t ppbus = device_get_parent(dev);
struct lpt_data *sc = DEVTOSOFTC(dev);
int error = 0;
if ((error = ppb_release_bus(ppbus, dev)) == 0)
sc->sc_state &= ~HAVEBUS;
return (error);
}
/*
* Internal routine to lptprobe to do port tests of one byte value
*/
static int
lpt_port_test(device_t ppbus, u_char data, u_char mask)
{
int temp, timeout;
data = data & mask;
ppb_wdtr(ppbus, data);
timeout = 10000;
do {
DELAY(10);
temp = ppb_rdtr(ppbus) & mask;
}
while (temp != data && --timeout);
lprintf(("out=%x\tin=%x\ttout=%d\n", data, temp, timeout));
return (temp == data);
}
/*
* Probe simplified by replacing multiple loops with a hardcoded
* test pattern - 1999/02/08 des@freebsd.org
*
* New lpt port probe Geoff Rehmet - Rhodes University - 14/2/94
* Based partially on Rod Grimes' printer probe
*
* Logic:
* 1) If no port address was given, use the bios detected ports
* and autodetect what ports the printers are on.
* 2) Otherwise, probe the data port at the address given,
* using the method in Rod Grimes' port probe.
* (Much code ripped off directly from Rod's probe.)
*
* Comments from Rod's probe:
* Logic:
* 1) You should be able to write to and read back the same value
* to the data port. Do an alternating zeros, alternating ones,
* walking zero, and walking one test to check for stuck bits.
*
* 2) You should be able to write to and read back the same value
* to the control port lower 5 bits, the upper 3 bits are reserved
* per the IBM PC technical reference manauls and different boards
* do different things with them. Do an alternating zeros, alternating
* ones, walking zero, and walking one test to check for stuck bits.
*
* Some printers drag the strobe line down when the are powered off
* so this bit has been masked out of the control port test.
*
* XXX Some printers may not like a fast pulse on init or strobe, I
* don't know at this point, if that becomes a problem these bits
* should be turned off in the mask byte for the control port test.
*
* We are finally left with a mask of 0x14, due to some printers
* being adamant about holding other bits high ........
*
* Before probing the control port, we write a 0 to the data port -
* If not, some printers chuck out garbage when the strobe line
* gets toggled.
*
* 3) Set the data and control ports to a value of 0
*
* This probe routine has been tested on Epson Lx-800, HP LJ3P,
* Epson FX-1170 and C.Itoh 8510RM
* printers.
* Quick exit on fail added.
*/
static int
lpt_detect(device_t dev)
{
device_t ppbus = device_get_parent(dev);
static u_char testbyte[18] = {
0x55, /* alternating zeros */
0xaa, /* alternating ones */
0xfe, 0xfd, 0xfb, 0xf7,
0xef, 0xdf, 0xbf, 0x7f, /* walking zero */
0x01, 0x02, 0x04, 0x08,
0x10, 0x20, 0x40, 0x80 /* walking one */
};
int i, error, status;
status = 1; /* assume success */
if ((error = lpt_request_ppbus(dev, PPB_DONTWAIT))) {
printf(LPT_NAME ": cannot alloc ppbus (%d)!\n", error);
status = 0;
goto end_probe;
}
for (i = 0; i < 18 && status; i++)
if (!lpt_port_test(ppbus, testbyte[i], 0xff)) {
status = 0;
goto end_probe;
}
end_probe:
/* write 0's to control and data ports */
ppb_wdtr(ppbus, 0);
ppb_wctr(ppbus, 0);
lpt_release_ppbus(dev);
return (status);
}
static void
lpt_identify(driver_t *driver, device_t parent)
{
BUS_ADD_CHILD(parent, 0, LPT_NAME, 0);
}
/*
* lpt_probe()
*/
static int
lpt_probe(device_t dev)
{
struct lpt_data *sc;
sc = DEVTOSOFTC(dev);
bzero(sc, sizeof(struct lpt_data));
/*
* Now, try to detect the printer.
*/
if (!lpt_detect(dev))
return (ENXIO);
device_set_desc(dev, "Printer");
return (0);
}
static int
lpt_attach(device_t dev)
{
device_t ppbus = device_get_parent(dev);
struct lpt_data *sc = DEVTOSOFTC(dev);
int zero = 0, unit = device_get_unit(dev);
int error;
uintptr_t irq;
sc->sc_primed = 0; /* not primed yet */
if ((error = lpt_request_ppbus(dev, PPB_DONTWAIT))) {
printf(LPT_NAME ": cannot alloc ppbus (%d)!\n", error);
return (0);
}
ppb_wctr(ppbus, LPC_NINIT);
/* check if we can use interrupt, should be done by ppc stuff */
lprintf(("oldirq %x\n", sc->sc_irq));
/* retrieve the ppbus irq */
BUS_READ_IVAR(ppbus, dev, PPBUS_IVAR_IRQ, &irq);
if (irq > 0) {
/* declare our interrupt handler */
sc->intr_resource = bus_alloc_resource(dev, SYS_RES_IRQ,
&zero, irq, irq, 1, RF_SHAREABLE);
}
if (sc->intr_resource) {
sc->sc_irq = LP_HAS_IRQ | LP_USE_IRQ | LP_ENABLE_IRQ;
device_printf(dev, "Interrupt-driven port\n");
} else {
sc->sc_irq = 0;
device_printf(dev, "Polled port\n");
}
lprintf(("irq %x %x\n", irq, sc->sc_irq));
lpt_release_ppbus(dev);
make_dev(&lpt_cdevsw, unit,
UID_ROOT, GID_WHEEL, 0600, LPT_NAME "%d", unit);
make_dev(&lpt_cdevsw, unit | LP_BYPASS,
UID_ROOT, GID_WHEEL, 0600, LPT_NAME "%d.ctl", unit);
return (0);
}
static void
lptout(void *arg)
{
device_t dev = (device_t)arg;
struct lpt_data *sc = DEVTOSOFTC(dev);
#ifdef LPT_DEBUG
device_t ppbus = device_get_parent(dev);
#endif
lprintf(("T %x ", ppb_rstr(ppbus)));
if (sc->sc_state & OPEN) {
sc->sc_backoff++;
if (sc->sc_backoff > hz/LPTOUTMAX)
sc->sc_backoff = sc->sc_backoff > hz/LPTOUTMAX;
timeout(lptout, (caddr_t)dev, sc->sc_backoff);
} else
sc->sc_state &= ~TOUT;
if (sc->sc_state & EERROR)
sc->sc_state &= ~EERROR;
/*
* Avoid possible hangs due to missed interrupts
*/
if (sc->sc_xfercnt) {
lptintr(dev);
} else {
sc->sc_state &= ~OBUSY;
wakeup((caddr_t)dev);
}
}
/*
* lptopen -- reset the printer, then wait until it's selected and not busy.
* If LP_BYPASS flag is selected, then we do not try to select the
* printer -- this is just used for passing ioctls.
*/
static int
lptopen(dev_t dev, int flags, int fmt, struct thread *td)
{
int s;
int trys, err;
u_int unit = LPTUNIT(minor(dev));
struct lpt_data *sc = UNITOSOFTC(unit);
device_t lptdev = UNITODEVICE(unit);
device_t ppbus = device_get_parent(lptdev);
if (!sc)
return (ENXIO);
if (sc->sc_state) {
lprintf((LPT_NAME ": still open %x\n", sc->sc_state));
return(EBUSY);
} else
sc->sc_state |= LPTINIT;
sc->sc_flags = LPTFLAGS(minor(dev));
/* Check for open with BYPASS flag set. */
if (sc->sc_flags & LP_BYPASS) {
sc->sc_state = OPEN;
return(0);
}
/* request the ppbus only if we don't have it already */
if ((err = lpt_request_ppbus(lptdev, PPB_WAIT|PPB_INTR)) != 0) {
/* give it a chance to try later */
sc->sc_state = 0;
return (err);
}
s = spltty();
lprintf((LPT_NAME " flags 0x%x\n", sc->sc_flags));
/* set IRQ status according to ENABLE_IRQ flag
*/
if (sc->sc_irq & LP_ENABLE_IRQ)
sc->sc_irq |= LP_USE_IRQ;
else
sc->sc_irq &= ~LP_USE_IRQ;
/* init printer */
if ((sc->sc_flags & LP_NO_PRIME) == 0) {
if((sc->sc_flags & LP_PRIMEOPEN) || sc->sc_primed == 0) {
ppb_wctr(ppbus, 0);
sc->sc_primed++;
DELAY(500);
}
}
ppb_wctr(ppbus, LPC_SEL|LPC_NINIT);
/* wait till ready (printer running diagnostics) */
trys = 0;
do {
/* ran out of waiting for the printer */
if (trys++ >= LPINITRDY*4) {
splx(s);
sc->sc_state = 0;
lprintf(("status %x\n", ppb_rstr(ppbus)));
lpt_release_ppbus(lptdev);
return (EBUSY);
}
/* wait 1/4 second, give up if we get a signal */
if (tsleep((caddr_t)lptdev, LPPRI|PCATCH, "lptinit", hz/4) !=
EWOULDBLOCK) {
sc->sc_state = 0;
splx(s);
lpt_release_ppbus(lptdev);
return (EBUSY);
}
/* is printer online and ready for output */
} while ((ppb_rstr(ppbus) &
(LPS_SEL|LPS_OUT|LPS_NBSY|LPS_NERR)) !=
(LPS_SEL|LPS_NBSY|LPS_NERR));
sc->sc_control = LPC_SEL|LPC_NINIT;
if (sc->sc_flags & LP_AUTOLF)
sc->sc_control |= LPC_AUTOL;
/* enable interrupt if interrupt-driven */
if (sc->sc_irq & LP_USE_IRQ)
sc->sc_control |= LPC_ENA;
ppb_wctr(ppbus, sc->sc_control);
sc->sc_state = OPEN;
sc->sc_inbuf = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
sc->sc_statbuf = malloc(BUFSTATSIZE, M_DEVBUF, M_WAITOK);
sc->sc_xfercnt = 0;
splx(s);
/* release the ppbus */
lpt_release_ppbus(lptdev);
/* only use timeout if using interrupt */
lprintf(("irq %x\n", sc->sc_irq));
if (sc->sc_irq & LP_USE_IRQ) {
sc->sc_state |= TOUT;
timeout(lptout, (caddr_t)lptdev,
(sc->sc_backoff = hz/LPTOUTINITIAL));
}
lprintf(("opened.\n"));
return(0);
}
/*
* lptclose -- close the device, free the local line buffer.
*
* Check for interrupted write call added.
*/
static int
lptclose(dev_t dev, int flags, int fmt, struct thread *td)
{
u_int unit = LPTUNIT(minor(dev));
struct lpt_data *sc = UNITOSOFTC(unit);
device_t lptdev = UNITODEVICE(unit);
device_t ppbus = device_get_parent(lptdev);
int err;
if(sc->sc_flags & LP_BYPASS)
goto end_close;
if ((err = lpt_request_ppbus(lptdev, PPB_WAIT|PPB_INTR)) != 0)
return (err);
sc->sc_state &= ~OPEN;
/* if the last write was interrupted, don't complete it */
if((!(sc->sc_state & INTERRUPTED)) && (sc->sc_irq & LP_USE_IRQ))
while ((ppb_rstr(ppbus) &
(LPS_SEL|LPS_OUT|LPS_NBSY|LPS_NERR)) !=
(LPS_SEL|LPS_NBSY|LPS_NERR) || sc->sc_xfercnt)
/* wait 1/4 second, give up if we get a signal */
if (tsleep((caddr_t)lptdev, LPPRI|PCATCH,
"lpclose", hz) != EWOULDBLOCK)
break;
ppb_wctr(ppbus, LPC_NINIT);
free(sc->sc_inbuf, M_DEVBUF);
free(sc->sc_statbuf, M_DEVBUF);
end_close:
/* release the bus anyway
* unregistration of interrupt forced by release
*/
lpt_release_ppbus(lptdev);
sc->sc_state = 0;
sc->sc_xfercnt = 0;
lprintf(("closed.\n"));
return(0);
}
/*
* lpt_pushbytes()
* Workhorse for actually spinning and writing bytes to printer
* Derived from lpa.c
* Originally by ?
*
* This code is only used when we are polling the port
*/
static int
lpt_pushbytes(device_t dev)
{
struct lpt_data *sc = DEVTOSOFTC(dev);
device_t ppbus = device_get_parent(dev);
int spin, err, tic;
char ch;
lprintf(("p"));
/* loop for every character .. */
while (sc->sc_xfercnt > 0) {
/* printer data */
ch = *(sc->sc_cp);
sc->sc_cp++;
sc->sc_xfercnt--;
/*
* Wait for printer ready.
* Loop 20 usecs testing BUSY bit, then sleep
* for exponentially increasing timeout. (vak)
*/
for (spin = 0; NOT_READY(ppbus) && spin < MAX_SPIN; ++spin)
DELAY(1); /* XXX delay is NOT this accurate! */
if (spin >= MAX_SPIN) {
tic = 0;
while (NOT_READY(ppbus)) {
/*
* Now sleep, every cycle a
* little longer ..
*/
tic = tic + tic + 1;
/*
* But no more than 10 seconds. (vak)
*/
if (tic > MAX_SLEEP)
tic = MAX_SLEEP;
err = tsleep((caddr_t)dev, LPPRI,
LPT_NAME "poll", tic);
if (err != EWOULDBLOCK) {
return (err);
}
}
}
/* output data */
ppb_wdtr(ppbus, ch);
/* strobe */
ppb_wctr(ppbus, sc->sc_control|LPC_STB);
ppb_wctr(ppbus, sc->sc_control);
}
return(0);
}
/*
* lptread --retrieve printer status in IEEE1284 NIBBLE mode
*/
static int
lptread(dev_t dev, struct uio *uio, int ioflag)
{
u_int unit = LPTUNIT(minor(dev));
struct lpt_data *sc = UNITOSOFTC(unit);
device_t lptdev = UNITODEVICE(unit);
device_t ppbus = device_get_parent(lptdev);
int error = 0, len;
if (sc->sc_flags & LP_BYPASS) {
/* we can't do reads in bypass mode */
return (EPERM);
}
if ((error = ppb_1284_negociate(ppbus, PPB_NIBBLE, 0)))
return (error);
/* read data in an other buffer, read/write may be simultaneous */
len = 0;
while (uio->uio_resid) {
if ((error = ppb_1284_read(ppbus, PPB_NIBBLE,
sc->sc_statbuf, min(BUFSTATSIZE,
uio->uio_resid), &len))) {
goto error;
}
if (!len)
goto error; /* no more data */
if ((error = uiomove(sc->sc_statbuf, len, uio)))
goto error;
}
error:
ppb_1284_terminate(ppbus);
return (error);
}
/*
* lptwrite --copy a line from user space to a local buffer, then call
* putc to get the chars moved to the output queue.
*
* Flagging of interrupted write added.
*/
static int
lptwrite(dev_t dev, struct uio *uio, int ioflag)
{
register unsigned n;
int err;
u_int unit = LPTUNIT(minor(dev));
struct lpt_data *sc = UNITOSOFTC(unit);
device_t lptdev = UNITODEVICE(unit);
device_t ppbus = device_get_parent(lptdev);
if(sc->sc_flags & LP_BYPASS) {
/* we can't do writes in bypass mode */
return(EPERM);
}
/* request the ppbus only if we don't have it already */
/* XXX interrupt registration?! */
if ((err = lpt_request_ppbus(lptdev, PPB_WAIT|PPB_INTR)) != 0)
return (err);
/* if interrupts are working, register the handler */
if (sc->sc_irq & LP_USE_IRQ) {
/* register our interrupt handler */
err = BUS_SETUP_INTR(ppbus, lptdev, sc->intr_resource,
INTR_TYPE_TTY, lpt_intr, lptdev,
&sc->intr_cookie);
if (err) {
device_printf(lptdev, "handler registration failed, polled mode.\n");
sc->sc_irq &= ~LP_USE_IRQ;
}
}
sc->sc_state &= ~INTERRUPTED;
while ((n = min(BUFSIZE, uio->uio_resid)) != 0) {
sc->sc_cp = sc->sc_inbuf;
uiomove(sc->sc_cp, n, uio);
sc->sc_xfercnt = n ;
if (sc->sc_irq & LP_ENABLE_EXT) {
/* try any extended mode */
err = ppb_write(ppbus, sc->sc_cp,
sc->sc_xfercnt, 0);
switch (err) {
case 0:
/* if not all data was sent, we could rely
* on polling for the last bytes */
sc->sc_xfercnt = 0;
break;
case EINTR:
sc->sc_state |= INTERRUPTED;
return(err);
case EINVAL:
/* advanced mode not avail */
log(LOG_NOTICE, LPT_NAME "%d: advanced mode not avail, polling\n", unit);
break;
default:
return(err);
}
} else while ((sc->sc_xfercnt > 0)&&(sc->sc_irq & LP_USE_IRQ)) {
lprintf(("i"));
/* if the printer is ready for a char, */
/* give it one */
if ((sc->sc_state & OBUSY) == 0){
lprintf(("\nC %d. ", sc->sc_xfercnt));
lptintr(lptdev);
}
lprintf(("W "));
if (sc->sc_state & OBUSY)
if ((err = tsleep((caddr_t)lptdev,
LPPRI|PCATCH, LPT_NAME "write", 0))) {
sc->sc_state |= INTERRUPTED;
return(err);
}
}
/* check to see if we must do a polled write */
if(!(sc->sc_irq & LP_USE_IRQ) && (sc->sc_xfercnt)) {
lprintf(("p"));
err = lpt_pushbytes(lptdev);
if (err)
return(err);
}
}
/* we have not been interrupted, release the ppbus */
lpt_release_ppbus(lptdev);
return(0);
}
/*
* lpt_intr -- handle printer interrupts which occur when the printer is
* ready to accept another char.
*
* do checking for interrupted write call.
*/
static void
lpt_intr(void *arg)
{
device_t lptdev = (device_t)arg;
device_t ppbus = device_get_parent(lptdev);
struct lpt_data *sc = DEVTOSOFTC(lptdev);
int sts = 0;
int i;
/* we must own the bus to use it */
if ((sc->sc_state & HAVEBUS) == 0)
return;
/*
* Is printer online and ready for output?
*
* Avoid falling back to lptout() too quickly. First spin-loop
* to see if the printer will become ready ``really soon now''.
*/
for (i = 0; i < 100 &&
((sts=ppb_rstr(ppbus)) & RDY_MASK) != LP_READY; i++) ;
if ((sts & RDY_MASK) == LP_READY) {
sc->sc_state = (sc->sc_state | OBUSY) & ~EERROR;
sc->sc_backoff = hz/LPTOUTINITIAL;
if (sc->sc_xfercnt) {
/* send char */
/*lprintf(("%x ", *sc->sc_cp)); */
ppb_wdtr(ppbus, *sc->sc_cp++) ;
ppb_wctr(ppbus, sc->sc_control|LPC_STB);
/* DELAY(X) */
ppb_wctr(ppbus, sc->sc_control);
/* any more data for printer */
if(--(sc->sc_xfercnt) > 0) return;
}
/*
* No more data waiting for printer.
* Wakeup is not done if write call was not interrupted.
*/
sc->sc_state &= ~OBUSY;
if(!(sc->sc_state & INTERRUPTED))
wakeup((caddr_t)lptdev);
lprintf(("w "));
return;
} else { /* check for error */
if(((sts & (LPS_NERR | LPS_OUT) ) != LPS_NERR) &&
(sc->sc_state & OPEN))
sc->sc_state |= EERROR;
/* lptout() will jump in and try to restart. */
}
lprintf(("sts %x ", sts));
}
static void
lptintr(device_t dev)
{
/* call the interrupt at required spl level */
int s = spltty();
lpt_intr(dev);
splx(s);
return;
}
static int
lptioctl(dev_t dev, u_long cmd, caddr_t data, int flags, struct thread *td)
{
int error = 0;
u_int unit = LPTUNIT(minor(dev));
struct lpt_data *sc = UNITOSOFTC(unit);
u_char old_sc_irq; /* old printer IRQ status */
switch (cmd) {
case LPT_IRQ :
if(sc->sc_irq & LP_HAS_IRQ) {
/*
* NOTE:
* If the IRQ status is changed,
* this will only be visible on the
* next open.
*
* If interrupt status changes,
* this gets syslog'd.
*/
old_sc_irq = sc->sc_irq;
switch(*(int*)data) {
case 0:
sc->sc_irq &= (~LP_ENABLE_IRQ);
break;
case 1:
sc->sc_irq &= (~LP_ENABLE_EXT);
sc->sc_irq |= LP_ENABLE_IRQ;
break;
case 2:
/* classic irq based transfer and advanced
* modes are in conflict
*/
sc->sc_irq &= (~LP_ENABLE_IRQ);
sc->sc_irq |= LP_ENABLE_EXT;
break;
case 3:
sc->sc_irq &= (~LP_ENABLE_EXT);
break;
default:
break;
}
if (old_sc_irq != sc->sc_irq )
log(LOG_NOTICE, LPT_NAME "%d: switched to %s %s mode\n",
unit,
(sc->sc_irq & LP_ENABLE_IRQ)?
"interrupt-driven":"polled",
(sc->sc_irq & LP_ENABLE_EXT)?
"extended":"standard");
} else /* polled port */
error = EOPNOTSUPP;
break;
default:
error = ENODEV;
}
return(error);
}
static device_method_t lpt_methods[] = {
/* device interface */
DEVMETHOD(device_identify, lpt_identify),
DEVMETHOD(device_probe, lpt_probe),
DEVMETHOD(device_attach, lpt_attach),
{ 0, 0 }
};
static driver_t lpt_driver = {
LPT_NAME,
lpt_methods,
sizeof(struct lpt_data),
};
DRIVER_MODULE(lpt, ppbus, lpt_driver, lpt_devclass, 0, 0);