111d7cb2e3
Adds support for probing and initializing bhndb(4) bridge state using the bhnd_erom API, ensuring that full bridge configuration is available *prior* to actually attaching and enumerating the bhnd(4) child device, allowing us to safely allocate bus-level agent/device resources during bhnd(4) bus enumeration. - Add a bhnd_erom_probe() method usable by bhndb(4). This is an analogue to the existing bhnd_erom_probe_static() method, and allows the bhndb bridge to discover the best available erom parser class prior to newbus probing of its children. - Add support for supplying identification hints when probing erom devices. This is required on early EXTIF-only chipsets, where chip identification registers are not available. - Migrate bhndb over to the new bhnd_erom API, using bhnd_core_info records rather than bridged bhnd(4) device_t references to determine the bridged chipsets' capability/bridge configuration. - The bhndb parent (e.g. if_bwn) is now required to supply a hardware priority table to the bridge. The default table is currently sufficient for our supported devices. - Drop the two-pass attach approach we used for compatibility with bhndb(4) in the bhnd(4) bus drivers, and instead perform bus enumeration immediately, and allocate bridged per-child bus-level resources during that enumeration. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D7768
1372 lines
35 KiB
C
1372 lines
35 KiB
C
/*-
|
|
* Copyright (c) 2015 Landon Fuller <landon@landonf.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
|
|
* redistribution must be conditioned upon including a substantially
|
|
* similar Disclaimer requirement for further binary redistribution.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/limits.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/bhnd/cores/chipc/chipcreg.h>
|
|
|
|
#include "bcma_eromreg.h"
|
|
#include "bcma_eromvar.h"
|
|
|
|
/*
|
|
* BCMA Enumeration ROM (EROM) Table
|
|
*
|
|
* Provides auto-discovery of BCMA cores on Broadcom's HND SoC.
|
|
*
|
|
* The EROM core address can be found at BCMA_CC_EROM_ADDR within the
|
|
* ChipCommon registers. The table itself is comprised of 32-bit
|
|
* type-tagged entries, organized into an array of variable-length
|
|
* core descriptor records.
|
|
*
|
|
* The final core descriptor is followed by a 32-bit BCMA_EROM_TABLE_EOF (0xF)
|
|
* marker.
|
|
*/
|
|
|
|
struct bcma_erom_io;
|
|
|
|
static const char *bcma_erom_entry_type_name (uint8_t entry);
|
|
|
|
static uint32_t bcma_eio_read4(struct bcma_erom_io *io,
|
|
bus_size_t offset);
|
|
|
|
static int bcma_erom_read32(struct bcma_erom *erom,
|
|
uint32_t *entry);
|
|
static int bcma_erom_skip32(struct bcma_erom *erom);
|
|
|
|
static int bcma_erom_skip_core(struct bcma_erom *erom);
|
|
static int bcma_erom_skip_mport(struct bcma_erom *erom);
|
|
static int bcma_erom_skip_sport_region(struct bcma_erom *erom);
|
|
|
|
static int bcma_erom_seek_next(struct bcma_erom *erom,
|
|
uint8_t etype);
|
|
static int bcma_erom_region_to_port_type(struct bcma_erom *erom,
|
|
uint8_t region_type, bhnd_port_type *port_type);
|
|
|
|
|
|
static int bcma_erom_peek32(struct bcma_erom *erom,
|
|
uint32_t *entry);
|
|
|
|
static bus_size_t bcma_erom_tell(struct bcma_erom *erom);
|
|
static void bcma_erom_seek(struct bcma_erom *erom,
|
|
bus_size_t offset);
|
|
static void bcma_erom_reset(struct bcma_erom *erom);
|
|
|
|
static int bcma_erom_seek_matching_core(struct bcma_erom *sc,
|
|
const struct bhnd_core_match *desc,
|
|
struct bhnd_core_info *core);
|
|
|
|
static int bcma_erom_parse_core(struct bcma_erom *erom,
|
|
struct bcma_erom_core *core);
|
|
|
|
static int bcma_erom_parse_mport(struct bcma_erom *erom,
|
|
struct bcma_erom_mport *mport);
|
|
|
|
static int bcma_erom_parse_sport_region(struct bcma_erom *erom,
|
|
struct bcma_erom_sport_region *region);
|
|
|
|
static void bcma_erom_to_core_info(const struct bcma_erom_core *core,
|
|
u_int core_idx, int core_unit,
|
|
struct bhnd_core_info *info);
|
|
|
|
/**
|
|
* BCMA EROM generic I/O context
|
|
*/
|
|
struct bcma_erom_io {
|
|
struct bhnd_resource *res; /**< memory resource, or NULL if initialized
|
|
with bus space tag and handle */
|
|
int rid; /**< memory resource id, or -1 */
|
|
|
|
bus_space_tag_t bst; /**< bus space tag, if any */
|
|
bus_space_handle_t bsh; /**< bus space handle, if any */
|
|
|
|
bus_size_t start; /**< base read offset */
|
|
};
|
|
|
|
/**
|
|
* BCMA EROM per-instance state.
|
|
*/
|
|
struct bcma_erom {
|
|
struct bhnd_erom obj;
|
|
device_t dev; /**< parent device, or NULL if none. */
|
|
struct bcma_erom_io io; /**< I/O context */
|
|
bus_size_t offset; /**< current read offset */
|
|
};
|
|
|
|
#define EROM_LOG(erom, fmt, ...) do { \
|
|
if (erom->dev != NULL) { \
|
|
device_printf(erom->dev, "erom[0x%llx]: " fmt, \
|
|
(unsigned long long) (erom->offset), ##__VA_ARGS__);\
|
|
} else { \
|
|
printf("erom[0x%llx]: " fmt, \
|
|
(unsigned long long) (erom->offset), ##__VA_ARGS__);\
|
|
} \
|
|
} while(0)
|
|
|
|
/** Return the type name for an EROM entry */
|
|
static const char *
|
|
bcma_erom_entry_type_name (uint8_t entry)
|
|
{
|
|
switch (BCMA_EROM_GET_ATTR(entry, ENTRY_TYPE)) {
|
|
case BCMA_EROM_ENTRY_TYPE_CORE:
|
|
return "core";
|
|
case BCMA_EROM_ENTRY_TYPE_MPORT:
|
|
return "mport";
|
|
case BCMA_EROM_ENTRY_TYPE_REGION:
|
|
return "region";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* Read a 32-bit value from an EROM I/O context.
|
|
*
|
|
* @param io EROM I/O context.
|
|
* @param offset Read offset.
|
|
*/
|
|
static uint32_t
|
|
bcma_eio_read4(struct bcma_erom_io *io, bus_size_t offset)
|
|
{
|
|
bus_size_t read_off;
|
|
|
|
read_off = io->start + offset;
|
|
if (io->res != NULL)
|
|
return (bhnd_bus_read_4(io->res, read_off));
|
|
else
|
|
return (bus_space_read_4(io->bst, io->bsh, read_off));
|
|
}
|
|
|
|
/* Initialize bcma_erom resource I/O context */
|
|
static void
|
|
bcma_eio_init(struct bcma_erom_io *io, struct bhnd_resource *res, int rid,
|
|
bus_size_t offset)
|
|
{
|
|
io->res = res;
|
|
io->rid = rid;
|
|
io->start = offset;
|
|
}
|
|
|
|
/* Initialize bcma_erom bus space I/O context */
|
|
static void
|
|
bcma_eio_init_static(struct bcma_erom_io *io, bus_space_tag_t bst,
|
|
bus_space_handle_t bsh, bus_size_t offset)
|
|
{
|
|
io->res = NULL;
|
|
io->rid = -1;
|
|
io->bst = bst;
|
|
io->bsh = bsh;
|
|
io->start = offset;
|
|
}
|
|
|
|
/* BCMA implementation of BHND_EROM_INIT() */
|
|
static int
|
|
bcma_erom_init(bhnd_erom_t *erom, const struct bhnd_chipid *cid,
|
|
device_t parent, int rid)
|
|
{
|
|
struct bcma_erom *sc;
|
|
struct bhnd_resource *res;
|
|
|
|
sc = (struct bcma_erom *)erom;
|
|
sc->dev = parent;
|
|
sc->offset = 0;
|
|
|
|
res = bhnd_alloc_resource(parent, SYS_RES_MEMORY, &rid, cid->enum_addr,
|
|
cid->enum_addr + BCMA_EROM_TABLE_SIZE - 1, BCMA_EROM_TABLE_SIZE,
|
|
RF_ACTIVE|RF_SHAREABLE);
|
|
|
|
if (res == NULL)
|
|
return (ENOMEM);
|
|
|
|
bcma_eio_init(&sc->io, res, rid, BCMA_EROM_TABLE_START);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* BCMA implementation of BHND_EROM_INIT_STATIC() */
|
|
static int
|
|
bcma_erom_init_static(bhnd_erom_t *erom, const struct bhnd_chipid *cid,
|
|
bus_space_tag_t bst, bus_space_handle_t bsh)
|
|
{
|
|
struct bcma_erom *sc;
|
|
|
|
sc = (struct bcma_erom *)erom;
|
|
sc->dev = NULL;
|
|
sc->offset = 0;
|
|
|
|
bcma_eio_init_static(&sc->io, bst, bsh, BCMA_EROM_TABLE_START);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* Common implementation of BHND_EROM_PROBE/BHND_EROM_PROBE_STATIC */
|
|
static int
|
|
bcma_erom_probe_common(struct bcma_erom_io *io, const struct bhnd_chipid *hint,
|
|
struct bhnd_chipid *cid)
|
|
{
|
|
uint32_t idreg, eromptr;
|
|
|
|
/* Hints aren't supported; all BCMA devices have a ChipCommon
|
|
* core */
|
|
if (hint != NULL)
|
|
return (EINVAL);
|
|
|
|
/* Confirm CHIPC_EROMPTR availability */
|
|
idreg = bcma_eio_read4(io, CHIPC_ID);
|
|
if (!BHND_CHIPTYPE_HAS_EROM(CHIPC_GET_BITS(idreg, CHIPC_ID_BUS)))
|
|
return (ENXIO);
|
|
|
|
/* Fetch EROM address */
|
|
eromptr = bcma_eio_read4(io, CHIPC_EROMPTR);
|
|
|
|
/* Parse chip identifier */
|
|
*cid = bhnd_parse_chipid(idreg, eromptr);
|
|
|
|
/* Verify chip type */
|
|
switch (cid->chip_type) {
|
|
case BHND_CHIPTYPE_BCMA:
|
|
return (BUS_PROBE_DEFAULT);
|
|
|
|
case BHND_CHIPTYPE_BCMA_ALT:
|
|
case BHND_CHIPTYPE_UBUS:
|
|
return (BUS_PROBE_GENERIC);
|
|
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
static int
|
|
bcma_erom_probe(bhnd_erom_class_t *cls, struct bhnd_resource *res,
|
|
bus_size_t offset, const struct bhnd_chipid *hint, struct bhnd_chipid *cid)
|
|
{
|
|
struct bcma_erom_io io;
|
|
|
|
bcma_eio_init(&io, res, rman_get_rid(res->res),
|
|
offset + BCMA_EROM_TABLE_START);
|
|
|
|
return (bcma_erom_probe_common(&io, hint, cid));
|
|
}
|
|
|
|
static int
|
|
bcma_erom_probe_static(bhnd_erom_class_t *cls, bus_space_tag_t bst,
|
|
bus_space_handle_t bsh, bus_addr_t paddr, const struct bhnd_chipid *hint,
|
|
struct bhnd_chipid *cid)
|
|
{
|
|
struct bcma_erom_io io;
|
|
|
|
bcma_eio_init_static(&io, bst, bsh, BCMA_EROM_TABLE_START);
|
|
return (bcma_erom_probe_common(&io, hint, cid));
|
|
}
|
|
|
|
|
|
static void
|
|
bcma_erom_fini(bhnd_erom_t *erom)
|
|
{
|
|
struct bcma_erom *sc = (struct bcma_erom *)erom;
|
|
|
|
if (sc->io.res != NULL) {
|
|
bhnd_release_resource(sc->dev, SYS_RES_MEMORY, sc->io.rid,
|
|
sc->io.res);
|
|
|
|
sc->io.res = NULL;
|
|
sc->io.rid = -1;
|
|
}
|
|
}
|
|
|
|
static int
|
|
bcma_erom_lookup_core(bhnd_erom_t *erom, const struct bhnd_core_match *desc,
|
|
struct bhnd_core_info *core)
|
|
{
|
|
struct bcma_erom *sc = (struct bcma_erom *)erom;
|
|
|
|
/* Search for the first matching core */
|
|
return (bcma_erom_seek_matching_core(sc, desc, core));
|
|
}
|
|
|
|
static int
|
|
bcma_erom_lookup_core_addr(bhnd_erom_t *erom, const struct bhnd_core_match *desc,
|
|
bhnd_port_type port_type, u_int port_num, u_int region_num,
|
|
struct bhnd_core_info *core, bhnd_addr_t *addr, bhnd_size_t *size)
|
|
{
|
|
struct bcma_erom *sc;
|
|
struct bcma_erom_core ec;
|
|
uint32_t entry;
|
|
uint8_t region_port, region_type;
|
|
bool found;
|
|
int error;
|
|
|
|
sc = (struct bcma_erom *)erom;
|
|
|
|
/* Seek to the first matching core and provide the core info
|
|
* to the caller */
|
|
if ((error = bcma_erom_seek_matching_core(sc, desc, core)))
|
|
return (error);
|
|
|
|
if ((error = bcma_erom_parse_core(sc, &ec)))
|
|
return (error);
|
|
|
|
/* Skip master ports */
|
|
for (u_long i = 0; i < ec.num_mport; i++) {
|
|
if ((error = bcma_erom_skip_mport(sc)))
|
|
return (error);
|
|
}
|
|
|
|
/* Seek to the region block for the given port type */
|
|
found = false;
|
|
while (1) {
|
|
bhnd_port_type p_type;
|
|
uint8_t r_type;
|
|
|
|
if ((error = bcma_erom_peek32(sc, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, REGION))
|
|
return (ENOENT);
|
|
|
|
/* Expected region type? */
|
|
r_type = BCMA_EROM_GET_ATTR(entry, REGION_TYPE);
|
|
error = bcma_erom_region_to_port_type(sc, r_type, &p_type);
|
|
if (error)
|
|
return (error);
|
|
|
|
if (p_type == port_type) {
|
|
found = true;
|
|
break;
|
|
}
|
|
|
|
/* Skip to next entry */
|
|
if ((error = bcma_erom_skip_sport_region(sc)))
|
|
return (error);
|
|
}
|
|
|
|
if (!found)
|
|
return (ENOENT);
|
|
|
|
/* Found the appropriate port type block; now find the region records
|
|
* for the given port number */
|
|
found = false;
|
|
for (u_int i = 0; i <= port_num; i++) {
|
|
bhnd_port_type p_type;
|
|
|
|
if ((error = bcma_erom_peek32(sc, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, REGION))
|
|
return (ENOENT);
|
|
|
|
/* Fetch the type/port of the first region entry */
|
|
region_type = BCMA_EROM_GET_ATTR(entry, REGION_TYPE);
|
|
region_port = BCMA_EROM_GET_ATTR(entry, REGION_PORT);
|
|
|
|
/* Have we found the region entries for the desired port? */
|
|
if (i == port_num) {
|
|
error = bcma_erom_region_to_port_type(sc, region_type,
|
|
&p_type);
|
|
if (error)
|
|
return (error);
|
|
|
|
if (p_type == port_type)
|
|
found = true;
|
|
|
|
break;
|
|
}
|
|
|
|
/* Otherwise, seek to next block of region records */
|
|
while (1) {
|
|
uint8_t next_type, next_port;
|
|
|
|
if ((error = bcma_erom_skip_sport_region(sc)))
|
|
return (error);
|
|
|
|
if ((error = bcma_erom_peek32(sc, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, REGION))
|
|
return (ENOENT);
|
|
|
|
next_type = BCMA_EROM_GET_ATTR(entry, REGION_TYPE);
|
|
next_port = BCMA_EROM_GET_ATTR(entry, REGION_PORT);
|
|
|
|
if (next_type != region_type ||
|
|
next_port != region_port)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found)
|
|
return (ENOENT);
|
|
|
|
/* Finally, search for the requested region number */
|
|
for (u_int i = 0; i <= region_num; i++) {
|
|
struct bcma_erom_sport_region region;
|
|
uint8_t next_port, next_type;
|
|
|
|
if ((error = bcma_erom_peek32(sc, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, REGION))
|
|
return (ENOENT);
|
|
|
|
/* Check for the end of the region block */
|
|
next_type = BCMA_EROM_GET_ATTR(entry, REGION_TYPE);
|
|
next_port = BCMA_EROM_GET_ATTR(entry, REGION_PORT);
|
|
|
|
if (next_type != region_type ||
|
|
next_port != region_port)
|
|
break;
|
|
|
|
/* Parse the region */
|
|
if ((error = bcma_erom_parse_sport_region(sc, ®ion)))
|
|
return (error);
|
|
|
|
/* Is this our target region_num? */
|
|
if (i == region_num) {
|
|
/* Found */
|
|
*addr = region.base_addr;
|
|
*size = region.size;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/* Not found */
|
|
return (ENOENT);
|
|
};
|
|
|
|
static int
|
|
bcma_erom_get_core_table(bhnd_erom_t *erom, struct bhnd_core_info **cores,
|
|
u_int *num_cores)
|
|
{
|
|
struct bcma_erom *sc;
|
|
struct bhnd_core_info *buffer;
|
|
bus_size_t initial_offset;
|
|
u_int count;
|
|
int error;
|
|
|
|
sc = (struct bcma_erom *)erom;
|
|
|
|
buffer = NULL;
|
|
initial_offset = bcma_erom_tell(sc);
|
|
|
|
/* Determine the core count */
|
|
bcma_erom_reset(sc);
|
|
for (count = 0, error = 0; !error; count++) {
|
|
struct bcma_erom_core core;
|
|
|
|
/* Seek to the first readable core entry */
|
|
error = bcma_erom_seek_next(sc, BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error == ENOENT)
|
|
break;
|
|
else if (error)
|
|
goto cleanup;
|
|
|
|
/* Read past the core descriptor */
|
|
if ((error = bcma_erom_parse_core(sc, &core)))
|
|
goto cleanup;
|
|
}
|
|
|
|
/* Allocate our output buffer */
|
|
buffer = malloc(sizeof(struct bhnd_core_info) * count, M_BHND,
|
|
M_NOWAIT);
|
|
if (buffer == NULL) {
|
|
error = ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
/* Parse all core descriptors */
|
|
bcma_erom_reset(sc);
|
|
for (u_int i = 0; i < count; i++) {
|
|
struct bcma_erom_core core;
|
|
int unit;
|
|
|
|
/* Parse the core */
|
|
error = bcma_erom_seek_next(sc, BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error)
|
|
goto cleanup;
|
|
|
|
error = bcma_erom_parse_core(sc, &core);
|
|
if (error)
|
|
goto cleanup;
|
|
|
|
/* Determine the unit number */
|
|
unit = 0;
|
|
for (u_int j = 0; j < i; j++) {
|
|
if (buffer[i].vendor == buffer[j].vendor &&
|
|
buffer[i].device == buffer[j].device)
|
|
unit++;
|
|
}
|
|
|
|
/* Convert to a bhnd info record */
|
|
bcma_erom_to_core_info(&core, i, unit, &buffer[i]);
|
|
}
|
|
|
|
cleanup:
|
|
if (!error) {
|
|
*cores = buffer;
|
|
*num_cores = count;
|
|
} else {
|
|
if (buffer != NULL)
|
|
free(buffer, M_BHND);
|
|
}
|
|
|
|
/* Restore the initial position */
|
|
bcma_erom_seek(sc, initial_offset);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
bcma_erom_free_core_table(bhnd_erom_t *erom, struct bhnd_core_info *cores)
|
|
{
|
|
free(cores, M_BHND);
|
|
}
|
|
|
|
/**
|
|
* Return the current read position.
|
|
*/
|
|
static bus_size_t
|
|
bcma_erom_tell(struct bcma_erom *erom)
|
|
{
|
|
return (erom->offset);
|
|
}
|
|
|
|
/**
|
|
* Seek to an absolute read position.
|
|
*/
|
|
static void
|
|
bcma_erom_seek(struct bcma_erom *erom, bus_size_t offset)
|
|
{
|
|
erom->offset = offset;
|
|
}
|
|
|
|
/**
|
|
* Read a 32-bit entry value from the EROM table without advancing the
|
|
* read position.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param entry Will contain the read result on success.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_peek32(struct bcma_erom *erom, uint32_t *entry)
|
|
{
|
|
if (erom->offset >= (BCMA_EROM_TABLE_SIZE - sizeof(uint32_t))) {
|
|
EROM_LOG(erom, "BCMA EROM table missing terminating EOF\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
*entry = bcma_eio_read4(&erom->io, erom->offset);
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* Read a 32-bit entry value from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param entry Will contain the read result on success.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_read32(struct bcma_erom *erom, uint32_t *entry)
|
|
{
|
|
int error;
|
|
|
|
if ((error = bcma_erom_peek32(erom, entry)) == 0)
|
|
erom->offset += 4;
|
|
|
|
return (error);
|
|
}
|
|
|
|
/**
|
|
* Read and discard 32-bit entry value from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_skip32(struct bcma_erom *erom)
|
|
{
|
|
uint32_t entry;
|
|
|
|
return bcma_erom_read32(erom, &entry);
|
|
}
|
|
|
|
/**
|
|
* Read and discard a core descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_skip_core(struct bcma_erom *erom)
|
|
{
|
|
struct bcma_erom_core core;
|
|
return (bcma_erom_parse_core(erom, &core));
|
|
}
|
|
|
|
/**
|
|
* Read and discard a master port descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_skip_mport(struct bcma_erom *erom)
|
|
{
|
|
struct bcma_erom_mport mp;
|
|
return (bcma_erom_parse_mport(erom, &mp));
|
|
}
|
|
|
|
/**
|
|
* Read and discard a port region descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero The read could not be completed.
|
|
*/
|
|
static int
|
|
bcma_erom_skip_sport_region(struct bcma_erom *erom)
|
|
{
|
|
struct bcma_erom_sport_region r;
|
|
return (bcma_erom_parse_sport_region(erom, &r));
|
|
}
|
|
|
|
/**
|
|
* Seek to the next entry matching the given EROM entry type.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param etype One of BCMA_EROM_ENTRY_TYPE_CORE,
|
|
* BCMA_EROM_ENTRY_TYPE_MPORT, or BCMA_EROM_ENTRY_TYPE_REGION.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero Reading or parsing the descriptor failed.
|
|
*/
|
|
static int
|
|
bcma_erom_seek_next(struct bcma_erom *erom, uint8_t etype)
|
|
{
|
|
uint32_t entry;
|
|
int error;
|
|
|
|
/* Iterate until we hit an entry matching the requested type. */
|
|
while (!(error = bcma_erom_peek32(erom, &entry))) {
|
|
/* Handle EOF */
|
|
if (entry == BCMA_EROM_TABLE_EOF)
|
|
return (ENOENT);
|
|
|
|
/* Invalid entry */
|
|
if (!BCMA_EROM_GET_ATTR(entry, ENTRY_ISVALID))
|
|
return (EINVAL);
|
|
|
|
/* Entry type matches? */
|
|
if (BCMA_EROM_GET_ATTR(entry, ENTRY_TYPE) == etype)
|
|
return (0);
|
|
|
|
/* Skip non-matching entry types. */
|
|
switch (BCMA_EROM_GET_ATTR(entry, ENTRY_TYPE)) {
|
|
case BCMA_EROM_ENTRY_TYPE_CORE:
|
|
if ((error = bcma_erom_skip_core(erom)))
|
|
return (error);
|
|
|
|
break;
|
|
|
|
case BCMA_EROM_ENTRY_TYPE_MPORT:
|
|
if ((error = bcma_erom_skip_mport(erom)))
|
|
return (error);
|
|
|
|
break;
|
|
|
|
case BCMA_EROM_ENTRY_TYPE_REGION:
|
|
if ((error = bcma_erom_skip_sport_region(erom)))
|
|
return (error);
|
|
break;
|
|
|
|
default:
|
|
/* Unknown entry type! */
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/**
|
|
* Return the read position to the start of the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
*/
|
|
static void
|
|
bcma_erom_reset(struct bcma_erom *erom)
|
|
{
|
|
erom->offset = 0;
|
|
}
|
|
|
|
/**
|
|
* Seek to the first core entry matching @p desc.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param desc The core match descriptor.
|
|
* @param[out] core On success, the matching core info. If the core info
|
|
* is not desired, a NULL pointer may be provided.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached before @p index was
|
|
* found.
|
|
* @retval non-zero Reading or parsing failed.
|
|
*/
|
|
static int
|
|
bcma_erom_seek_matching_core(struct bcma_erom *sc,
|
|
const struct bhnd_core_match *desc, struct bhnd_core_info *core)
|
|
{
|
|
struct bhnd_core_match imatch;
|
|
bus_size_t core_offset, next_offset;
|
|
int error;
|
|
|
|
/* Seek to table start. */
|
|
bcma_erom_reset(sc);
|
|
|
|
/* We can't determine a core's unit number during the initial scan. */
|
|
imatch = *desc;
|
|
imatch.m.match.core_unit = 0;
|
|
|
|
/* Locate the first matching core */
|
|
for (u_int i = 0; i < UINT_MAX; i++) {
|
|
struct bcma_erom_core ec;
|
|
struct bhnd_core_info ci;
|
|
|
|
/* Seek to the next core */
|
|
error = bcma_erom_seek_next(sc, BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Save the core offset */
|
|
core_offset = bcma_erom_tell(sc);
|
|
|
|
/* Parse the core */
|
|
if ((error = bcma_erom_parse_core(sc, &ec)))
|
|
return (error);
|
|
|
|
bcma_erom_to_core_info(&ec, i, 0, &ci);
|
|
|
|
/* Check for initial match */
|
|
if (!bhnd_core_matches(&ci, &imatch))
|
|
continue;
|
|
|
|
/* Re-scan preceding cores to determine the unit number. */
|
|
next_offset = bcma_erom_tell(sc);
|
|
bcma_erom_reset(sc);
|
|
for (u_int j = 0; j < i; j++) {
|
|
/* Parse the core */
|
|
error = bcma_erom_seek_next(sc,
|
|
BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error)
|
|
return (error);
|
|
|
|
if ((error = bcma_erom_parse_core(sc, &ec)))
|
|
return (error);
|
|
|
|
/* Bump the unit number? */
|
|
if (ec.vendor == ci.vendor && ec.device == ci.device)
|
|
ci.unit++;
|
|
}
|
|
|
|
/* Check for full match against now-valid unit number */
|
|
if (!bhnd_core_matches(&ci, desc)) {
|
|
/* Reposition to allow reading the next core */
|
|
bcma_erom_seek(sc, next_offset);
|
|
continue;
|
|
}
|
|
|
|
/* Found; seek to the core's initial offset and provide
|
|
* the core info to the caller */
|
|
bcma_erom_seek(sc, core_offset);
|
|
if (core != NULL)
|
|
*core = ci;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* Not found, or a parse error occured */
|
|
return (error);
|
|
}
|
|
|
|
/**
|
|
* Read the next core descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param[out] core On success, will be populated with the parsed core
|
|
* descriptor data.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the EROM table was reached.
|
|
* @retval non-zero Reading or parsing the core descriptor failed.
|
|
*/
|
|
static int
|
|
bcma_erom_parse_core(struct bcma_erom *erom, struct bcma_erom_core *core)
|
|
{
|
|
uint32_t entry;
|
|
int error;
|
|
|
|
/* Parse CoreDescA */
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
|
|
/* Handle EOF */
|
|
if (entry == BCMA_EROM_TABLE_EOF)
|
|
return (ENOENT);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, CORE)) {
|
|
EROM_LOG(erom, "Unexpected EROM entry 0x%x (type=%s)\n",
|
|
entry, bcma_erom_entry_type_name(entry));
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
core->vendor = BCMA_EROM_GET_ATTR(entry, COREA_DESIGNER);
|
|
core->device = BCMA_EROM_GET_ATTR(entry, COREA_ID);
|
|
|
|
/* Parse CoreDescB */
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, CORE)) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
core->rev = BCMA_EROM_GET_ATTR(entry, COREB_REV);
|
|
core->num_mport = BCMA_EROM_GET_ATTR(entry, COREB_NUM_MP);
|
|
core->num_dport = BCMA_EROM_GET_ATTR(entry, COREB_NUM_DP);
|
|
core->num_mwrap = BCMA_EROM_GET_ATTR(entry, COREB_NUM_WMP);
|
|
core->num_swrap = BCMA_EROM_GET_ATTR(entry, COREB_NUM_WSP);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* Read the next master port descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param[out] mport On success, will be populated with the parsed
|
|
* descriptor data.
|
|
* @retval 0 success
|
|
* @retval non-zero Reading or parsing the descriptor failed.
|
|
*/
|
|
static int
|
|
bcma_erom_parse_mport(struct bcma_erom *erom, struct bcma_erom_mport *mport)
|
|
{
|
|
uint32_t entry;
|
|
int error;
|
|
|
|
/* Parse the master port descriptor */
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
|
|
if (!BCMA_EROM_ENTRY_IS(entry, MPORT))
|
|
return (EINVAL);
|
|
|
|
mport->port_vid = BCMA_EROM_GET_ATTR(entry, MPORT_ID);
|
|
mport->port_num = BCMA_EROM_GET_ATTR(entry, MPORT_NUM);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* Read the next slave port region descriptor from the EROM table.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param[out] mport On success, will be populated with the parsed
|
|
* descriptor data.
|
|
* @retval 0 success
|
|
* @retval ENOENT The end of the region descriptor table was reached.
|
|
* @retval non-zero Reading or parsing the descriptor failed.
|
|
*/
|
|
static int
|
|
bcma_erom_parse_sport_region(struct bcma_erom *erom,
|
|
struct bcma_erom_sport_region *region)
|
|
{
|
|
uint32_t entry;
|
|
uint8_t size_type;
|
|
int error;
|
|
|
|
/* Peek at the region descriptor */
|
|
if (bcma_erom_peek32(erom, &entry))
|
|
return (EINVAL);
|
|
|
|
/* A non-region entry signals the end of the region table */
|
|
if (!BCMA_EROM_ENTRY_IS(entry, REGION)) {
|
|
return (ENOENT);
|
|
} else {
|
|
bcma_erom_skip32(erom);
|
|
}
|
|
|
|
region->base_addr = BCMA_EROM_GET_ATTR(entry, REGION_BASE);
|
|
region->region_type = BCMA_EROM_GET_ATTR(entry, REGION_TYPE);
|
|
region->region_port = BCMA_EROM_GET_ATTR(entry, REGION_PORT);
|
|
size_type = BCMA_EROM_GET_ATTR(entry, REGION_SIZE);
|
|
|
|
/* If region address is 64-bit, fetch the high bits. */
|
|
if (BCMA_EROM_GET_ATTR(entry, REGION_64BIT)) {
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
|
|
region->base_addr |= ((bhnd_addr_t) entry << 32);
|
|
}
|
|
|
|
/* Parse the region size; it's either encoded as the binary logarithm
|
|
* of the number of 4K pages (i.e. log2 n), or its encoded as a
|
|
* 32-bit/64-bit literal value directly following the current entry. */
|
|
if (size_type == BCMA_EROM_REGION_SIZE_OTHER) {
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
|
|
region->size = BCMA_EROM_GET_ATTR(entry, RSIZE_VAL);
|
|
|
|
if (BCMA_EROM_GET_ATTR(entry, RSIZE_64BIT)) {
|
|
if ((error = bcma_erom_read32(erom, &entry)))
|
|
return (error);
|
|
region->size |= ((bhnd_size_t) entry << 32);
|
|
}
|
|
} else {
|
|
region->size = BCMA_EROM_REGION_SIZE_BASE << size_type;
|
|
}
|
|
|
|
/* Verify that addr+size does not overflow. */
|
|
if (region->size != 0 &&
|
|
BHND_ADDR_MAX - (region->size - 1) < region->base_addr)
|
|
{
|
|
EROM_LOG(erom, "%s%u: invalid address map %llx:%llx\n",
|
|
bcma_erom_entry_type_name(region->region_type),
|
|
region->region_port,
|
|
(unsigned long long) region->base_addr,
|
|
(unsigned long long) region->size);
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* Convert a bcma_erom_core record to its bhnd_core_info representation.
|
|
*
|
|
* @param core EROM core record to convert.
|
|
* @param core_idx The core index of @p core.
|
|
* @param core_unit The core unit of @p core.
|
|
* @param[out] info The populated bhnd_core_info representation.
|
|
*/
|
|
static void
|
|
bcma_erom_to_core_info(const struct bcma_erom_core *core, u_int core_idx,
|
|
int core_unit, struct bhnd_core_info *info)
|
|
{
|
|
info->vendor = core->vendor;
|
|
info->device = core->device;
|
|
info->hwrev = core->rev;
|
|
info->core_idx = core_idx;
|
|
info->unit = core_unit;
|
|
}
|
|
|
|
/**
|
|
* Map an EROM region type to its corresponding port type.
|
|
*
|
|
* @param region_type Region type value.
|
|
* @param[out] port_type On success, the corresponding port type.
|
|
*/
|
|
static int
|
|
bcma_erom_region_to_port_type(struct bcma_erom *erom, uint8_t region_type,
|
|
bhnd_port_type *port_type)
|
|
{
|
|
switch (region_type) {
|
|
case BCMA_EROM_REGION_TYPE_DEVICE:
|
|
*port_type = BHND_PORT_DEVICE;
|
|
return (0);
|
|
case BCMA_EROM_REGION_TYPE_BRIDGE:
|
|
*port_type = BHND_PORT_BRIDGE;
|
|
return (0);
|
|
case BCMA_EROM_REGION_TYPE_MWRAP:
|
|
case BCMA_EROM_REGION_TYPE_SWRAP:
|
|
*port_type = BHND_PORT_AGENT;
|
|
return (0);
|
|
default:
|
|
EROM_LOG(erom, "unsupported region type %hhx\n",
|
|
region_type);
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Register all MMIO region descriptors for the given slave port.
|
|
*
|
|
* @param erom EROM read state.
|
|
* @param corecfg Core info to be populated with the scanned port regions.
|
|
* @param port_num Port index for which regions will be parsed.
|
|
* @param region_type The region type to be parsed.
|
|
* @param[out] offset The offset at which to perform parsing. On success, this
|
|
* will be updated to point to the next EROM table entry.
|
|
*/
|
|
static int
|
|
bcma_erom_corecfg_fill_port_regions(struct bcma_erom *erom,
|
|
struct bcma_corecfg *corecfg, bcma_pid_t port_num,
|
|
uint8_t region_type)
|
|
{
|
|
struct bcma_sport *sport;
|
|
struct bcma_sport_list *sports;
|
|
bus_size_t entry_offset;
|
|
int error;
|
|
bhnd_port_type port_type;
|
|
|
|
error = 0;
|
|
|
|
/* Determine the port type for this region type. */
|
|
error = bcma_erom_region_to_port_type(erom, region_type, &port_type);
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Fetch the list to be populated */
|
|
sports = bcma_corecfg_get_port_list(corecfg, port_type);
|
|
|
|
/* Allocate a new port descriptor */
|
|
sport = bcma_alloc_sport(port_num, port_type);
|
|
if (sport == NULL)
|
|
return (ENOMEM);
|
|
|
|
/* Read all address regions defined for this port */
|
|
for (bcma_rmid_t region_num = 0;; region_num++) {
|
|
struct bcma_map *map;
|
|
struct bcma_erom_sport_region spr;
|
|
|
|
/* No valid port definition should come anywhere near
|
|
* BCMA_RMID_MAX. */
|
|
if (region_num == BCMA_RMID_MAX) {
|
|
EROM_LOG(erom, "core%u %s%u: region count reached "
|
|
"upper limit of %u\n",
|
|
corecfg->core_info.core_idx,
|
|
bhnd_port_type_name(port_type),
|
|
port_num, BCMA_RMID_MAX);
|
|
|
|
error = EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
/* Parse the next region entry. */
|
|
entry_offset = bcma_erom_tell(erom);
|
|
error = bcma_erom_parse_sport_region(erom, &spr);
|
|
if (error && error != ENOENT) {
|
|
EROM_LOG(erom, "core%u %s%u.%u: invalid slave port "
|
|
"address region\n",
|
|
corecfg->core_info.core_idx,
|
|
bhnd_port_type_name(port_type),
|
|
port_num, region_num);
|
|
goto cleanup;
|
|
}
|
|
|
|
/* ENOENT signals no further region entries */
|
|
if (error == ENOENT) {
|
|
/* No further entries */
|
|
error = 0;
|
|
break;
|
|
}
|
|
|
|
/* A region or type mismatch also signals no further region
|
|
* entries */
|
|
if (spr.region_port != port_num ||
|
|
spr.region_type != region_type)
|
|
{
|
|
/* We don't want to consume this entry */
|
|
bcma_erom_seek(erom, entry_offset);
|
|
|
|
error = 0;
|
|
goto cleanup;
|
|
}
|
|
|
|
/*
|
|
* Create the map entry.
|
|
*/
|
|
map = malloc(sizeof(struct bcma_map), M_BHND, M_NOWAIT);
|
|
if (map == NULL) {
|
|
error = ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
map->m_region_num = region_num;
|
|
map->m_base = spr.base_addr;
|
|
map->m_size = spr.size;
|
|
map->m_rid = -1;
|
|
|
|
/* Add the region map to the port */
|
|
STAILQ_INSERT_TAIL(&sport->sp_maps, map, m_link);
|
|
sport->sp_num_maps++;
|
|
}
|
|
|
|
cleanup:
|
|
/* Append the new port descriptor on success, or deallocate the
|
|
* partially parsed descriptor on failure. */
|
|
if (error == 0) {
|
|
STAILQ_INSERT_TAIL(sports, sport, sp_link);
|
|
} else if (sport != NULL) {
|
|
bcma_free_sport(sport);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* Parse the next core entry from the EROM table and produce a bcma_corecfg
|
|
* to be owned by the caller.
|
|
*
|
|
* @param erom A bcma EROM instance.
|
|
* @param[out] result On success, the core's device info. The caller inherits
|
|
* ownership of this allocation.
|
|
*
|
|
* @return If successful, returns 0. If the end of the EROM table is hit,
|
|
* ENOENT will be returned. On error, returns a non-zero error value.
|
|
*/
|
|
int
|
|
bcma_erom_next_corecfg(struct bcma_erom *erom, struct bcma_corecfg **result)
|
|
{
|
|
struct bcma_corecfg *cfg;
|
|
struct bcma_erom_core core;
|
|
uint8_t first_region_type;
|
|
bus_size_t initial_offset;
|
|
u_int core_index;
|
|
int core_unit;
|
|
int error;
|
|
|
|
cfg = NULL;
|
|
initial_offset = bcma_erom_tell(erom);
|
|
|
|
/* Parse the next core entry */
|
|
if ((error = bcma_erom_parse_core(erom, &core)))
|
|
return (error);
|
|
|
|
/* Determine the core's index and unit numbers */
|
|
bcma_erom_reset(erom);
|
|
core_unit = 0;
|
|
core_index = 0;
|
|
for (; bcma_erom_tell(erom) != initial_offset; core_index++) {
|
|
struct bcma_erom_core prev_core;
|
|
|
|
/* Parse next core */
|
|
error = bcma_erom_seek_next(erom, BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error)
|
|
return (error);
|
|
|
|
if ((error = bcma_erom_parse_core(erom, &prev_core)))
|
|
return (error);
|
|
|
|
/* Is earlier unit? */
|
|
if (core.vendor == prev_core.vendor &&
|
|
core.device == prev_core.device)
|
|
{
|
|
core_unit++;
|
|
}
|
|
|
|
/* Seek to next core */
|
|
error = bcma_erom_seek_next(erom, BCMA_EROM_ENTRY_TYPE_CORE);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
|
|
/* We already parsed the core descriptor */
|
|
if ((error = bcma_erom_skip_core(erom)))
|
|
return (error);
|
|
|
|
/* Allocate our corecfg */
|
|
cfg = bcma_alloc_corecfg(core_index, core_unit, core.vendor,
|
|
core.device, core.rev);
|
|
if (cfg == NULL)
|
|
return (ENOMEM);
|
|
|
|
/* These are 5-bit values in the EROM table, and should never be able
|
|
* to overflow BCMA_PID_MAX. */
|
|
KASSERT(core.num_mport <= BCMA_PID_MAX, ("unsupported mport count"));
|
|
KASSERT(core.num_dport <= BCMA_PID_MAX, ("unsupported dport count"));
|
|
KASSERT(core.num_mwrap + core.num_swrap <= BCMA_PID_MAX,
|
|
("unsupported wport count"));
|
|
|
|
if (bootverbose) {
|
|
EROM_LOG(erom,
|
|
"core%u: %s %s (cid=%hx, rev=%hu, unit=%d)\n",
|
|
core_index,
|
|
bhnd_vendor_name(core.vendor),
|
|
bhnd_find_core_name(core.vendor, core.device),
|
|
core.device, core.rev, core_unit);
|
|
}
|
|
|
|
cfg->num_master_ports = core.num_mport;
|
|
cfg->num_dev_ports = 0; /* determined below */
|
|
cfg->num_bridge_ports = 0; /* determined blow */
|
|
cfg->num_wrapper_ports = core.num_mwrap + core.num_swrap;
|
|
|
|
/* Parse Master Port Descriptors */
|
|
for (uint8_t i = 0; i < core.num_mport; i++) {
|
|
struct bcma_mport *mport;
|
|
struct bcma_erom_mport mpd;
|
|
|
|
/* Parse the master port descriptor */
|
|
error = bcma_erom_parse_mport(erom, &mpd);
|
|
if (error)
|
|
goto failed;
|
|
|
|
/* Initialize a new bus mport structure */
|
|
mport = malloc(sizeof(struct bcma_mport), M_BHND, M_NOWAIT);
|
|
if (mport == NULL) {
|
|
error = ENOMEM;
|
|
goto failed;
|
|
}
|
|
|
|
mport->mp_vid = mpd.port_vid;
|
|
mport->mp_num = mpd.port_num;
|
|
|
|
/* Update dinfo */
|
|
STAILQ_INSERT_TAIL(&cfg->master_ports, mport, mp_link);
|
|
}
|
|
|
|
|
|
/*
|
|
* Determine whether this is a bridge device; if so, we can
|
|
* expect the first sequence of address region descriptors to
|
|
* be of EROM_REGION_TYPE_BRIDGE instead of
|
|
* BCMA_EROM_REGION_TYPE_DEVICE.
|
|
*
|
|
* It's unclear whether this is the correct mechanism by which we
|
|
* should detect/handle bridge devices, but this approach matches
|
|
* that of (some of) Broadcom's published drivers.
|
|
*/
|
|
if (core.num_dport > 0) {
|
|
uint32_t entry;
|
|
|
|
if ((error = bcma_erom_peek32(erom, &entry)))
|
|
goto failed;
|
|
|
|
if (BCMA_EROM_ENTRY_IS(entry, REGION) &&
|
|
BCMA_EROM_GET_ATTR(entry, REGION_TYPE) == BCMA_EROM_REGION_TYPE_BRIDGE)
|
|
{
|
|
first_region_type = BCMA_EROM_REGION_TYPE_BRIDGE;
|
|
cfg->num_dev_ports = 0;
|
|
cfg->num_bridge_ports = core.num_dport;
|
|
} else {
|
|
first_region_type = BCMA_EROM_REGION_TYPE_DEVICE;
|
|
cfg->num_dev_ports = core.num_dport;
|
|
cfg->num_bridge_ports = 0;
|
|
}
|
|
}
|
|
|
|
/* Device/bridge port descriptors */
|
|
for (uint8_t sp_num = 0; sp_num < core.num_dport; sp_num++) {
|
|
error = bcma_erom_corecfg_fill_port_regions(erom, cfg, sp_num,
|
|
first_region_type);
|
|
|
|
if (error)
|
|
goto failed;
|
|
}
|
|
|
|
/* Wrapper (aka device management) descriptors (for master ports). */
|
|
for (uint8_t sp_num = 0; sp_num < core.num_mwrap; sp_num++) {
|
|
error = bcma_erom_corecfg_fill_port_regions(erom, cfg, sp_num,
|
|
BCMA_EROM_REGION_TYPE_MWRAP);
|
|
|
|
if (error)
|
|
goto failed;
|
|
}
|
|
|
|
|
|
/* Wrapper (aka device management) descriptors (for slave ports). */
|
|
for (uint8_t i = 0; i < core.num_swrap; i++) {
|
|
/* Slave wrapper ports are not numbered distinctly from master
|
|
* wrapper ports. */
|
|
|
|
/*
|
|
* Broadcom DDR1/DDR2 Memory Controller
|
|
* (cid=82e, rev=1, unit=0, d/mw/sw = 2/0/1 ) ->
|
|
* bhnd0: erom[0xdc]: core6 agent0.0: mismatch got: 0x1 (0x2)
|
|
*
|
|
* ARM BP135 AMBA3 AXI to APB Bridge
|
|
* (cid=135, rev=0, unit=0, d/mw/sw = 1/0/1 ) ->
|
|
* bhnd0: erom[0x124]: core9 agent1.0: mismatch got: 0x0 (0x2)
|
|
*
|
|
* core.num_mwrap
|
|
* ===>
|
|
* (core.num_mwrap > 0) ?
|
|
* core.num_mwrap :
|
|
* ((core.vendor == BHND_MFGID_BCM) ? 1 : 0)
|
|
*/
|
|
uint8_t sp_num;
|
|
sp_num = (core.num_mwrap > 0) ?
|
|
core.num_mwrap :
|
|
((core.vendor == BHND_MFGID_BCM) ? 1 : 0) + i;
|
|
error = bcma_erom_corecfg_fill_port_regions(erom, cfg, sp_num,
|
|
BCMA_EROM_REGION_TYPE_SWRAP);
|
|
|
|
if (error)
|
|
goto failed;
|
|
}
|
|
|
|
*result = cfg;
|
|
return (0);
|
|
|
|
failed:
|
|
if (cfg != NULL)
|
|
bcma_free_corecfg(cfg);
|
|
|
|
return error;
|
|
}
|
|
|
|
static kobj_method_t bcma_erom_methods[] = {
|
|
KOBJMETHOD(bhnd_erom_probe, bcma_erom_probe),
|
|
KOBJMETHOD(bhnd_erom_probe_static, bcma_erom_probe_static),
|
|
KOBJMETHOD(bhnd_erom_init, bcma_erom_init),
|
|
KOBJMETHOD(bhnd_erom_init_static, bcma_erom_init_static),
|
|
KOBJMETHOD(bhnd_erom_fini, bcma_erom_fini),
|
|
KOBJMETHOD(bhnd_erom_get_core_table, bcma_erom_get_core_table),
|
|
KOBJMETHOD(bhnd_erom_free_core_table, bcma_erom_free_core_table),
|
|
KOBJMETHOD(bhnd_erom_lookup_core, bcma_erom_lookup_core),
|
|
KOBJMETHOD(bhnd_erom_lookup_core_addr, bcma_erom_lookup_core_addr),
|
|
|
|
KOBJMETHOD_END
|
|
};
|
|
|
|
BHND_EROM_DEFINE_CLASS(bcma_erom, bcma_erom_parser, bcma_erom_methods, sizeof(struct bcma_erom));
|