f6930bec33
Replace various void * / int argument combinations with common structures: - ieee80211_ratectl_tx_status for *_tx_complete(); - ieee80211_ratectl_tx_stats for *_tx_update(); While here, improve amrr_tx_update() for a bit: 1. In case, if receiver is not known (typical for Ralink USB drivers), refresh Tx rate for all nodes on the interface. 2. There was a misuse: - otus(4) sends non-decreasing counters (as originally intended); - but ural(4), rum(4) and run(4) are using 'read & clear' registers to obtain statistics for some period of time (and those 'last period' values are used as arguments for tx_update()). If arguments are not big enough, they are just discarded after the next call. Fix: move counting into *_tx_update() (now otus(4) will zero out all node counters after every tx_update() call) Tested with: - Intel 3945BG (wpi(4)), STA mode. - WUSB54GC (rum(4)), STA / HOSTAP mode. - RTL8188EU (urtwn(4)), STA mode. Reviewed by: adrian Differential Revision: https://reviews.freebsd.org/D8037
211 lines
5.4 KiB
C
211 lines
5.4 KiB
C
/*-
|
|
* Copyright (c) 2007 Damien Bergamini <damien.bergamini@free.fr>
|
|
* Copyright (c) 2012 Bernhard Schmidt <bschmidt@FreeBSD.org>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $OpenBSD: rt2860var.h,v 1.20 2010/09/07 16:21:42 deraadt Exp $
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#define RT2860_TX_RING_COUNT 64
|
|
#define RT2860_RX_RING_COUNT 128
|
|
#define RT2860_TX_POOL_COUNT (RT2860_TX_RING_COUNT * 2)
|
|
|
|
#define RT2860_MAX_SCATTER ((RT2860_TX_RING_COUNT * 2) - 1)
|
|
|
|
/* HW supports up to 255 STAs */
|
|
#define RT2860_WCID_MAX 254
|
|
#define RT2860_AID2WCID(aid) ((aid) & 0xff)
|
|
|
|
struct rt2860_rx_radiotap_header {
|
|
struct ieee80211_radiotap_header wr_ihdr;
|
|
uint64_t wr_tsf;
|
|
uint8_t wr_flags;
|
|
uint8_t wr_rate;
|
|
uint16_t wr_chan_freq;
|
|
uint16_t wr_chan_flags;
|
|
uint8_t wr_antenna;
|
|
int8_t wr_antsignal;
|
|
int8_t wr_antnoise;
|
|
} __packed __aligned(8);
|
|
|
|
#define RT2860_RX_RADIOTAP_PRESENT \
|
|
((1 << IEEE80211_RADIOTAP_TSFT) | \
|
|
(1 << IEEE80211_RADIOTAP_FLAGS) | \
|
|
(1 << IEEE80211_RADIOTAP_RATE) | \
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
|
|
(1 << IEEE80211_RADIOTAP_ANTENNA) | \
|
|
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \
|
|
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE))
|
|
|
|
struct rt2860_tx_radiotap_header {
|
|
struct ieee80211_radiotap_header wt_ihdr;
|
|
uint8_t wt_flags;
|
|
uint8_t wt_rate;
|
|
uint16_t wt_chan_freq;
|
|
uint16_t wt_chan_flags;
|
|
} __packed __aligned(8);
|
|
|
|
#define RT2860_TX_RADIOTAP_PRESENT \
|
|
((1 << IEEE80211_RADIOTAP_FLAGS) | \
|
|
(1 << IEEE80211_RADIOTAP_RATE) | \
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL))
|
|
|
|
struct rt2860_tx_data {
|
|
struct rt2860_txwi *txwi;
|
|
struct mbuf *m;
|
|
struct ieee80211_node *ni;
|
|
bus_dmamap_t map;
|
|
bus_addr_t paddr;
|
|
SLIST_ENTRY(rt2860_tx_data) next;
|
|
};
|
|
|
|
struct rt2860_tx_ring {
|
|
struct rt2860_txd *txd;
|
|
bus_addr_t paddr;
|
|
bus_dma_tag_t desc_dmat;
|
|
bus_dmamap_t desc_map;
|
|
bus_dma_segment_t seg;
|
|
struct rt2860_tx_data *data[RT2860_TX_RING_COUNT];
|
|
int cur;
|
|
int next;
|
|
int queued;
|
|
};
|
|
|
|
struct rt2860_rx_data {
|
|
struct mbuf *m;
|
|
bus_dmamap_t map;
|
|
};
|
|
|
|
struct rt2860_rx_ring {
|
|
struct rt2860_rxd *rxd;
|
|
bus_addr_t paddr;
|
|
bus_dma_tag_t desc_dmat;
|
|
bus_dmamap_t desc_map;
|
|
bus_dma_tag_t data_dmat;
|
|
bus_dma_segment_t seg;
|
|
unsigned int cur; /* must be unsigned */
|
|
struct rt2860_rx_data data[RT2860_RX_RING_COUNT];
|
|
};
|
|
|
|
struct rt2860_node {
|
|
struct ieee80211_node ni;
|
|
uint8_t wcid;
|
|
uint8_t ridx[IEEE80211_RATE_MAXSIZE];
|
|
uint8_t ctl_ridx[IEEE80211_RATE_MAXSIZE];
|
|
};
|
|
|
|
struct rt2860_vap {
|
|
struct ieee80211vap ral_vap;
|
|
|
|
int (*ral_newstate)(struct ieee80211vap *,
|
|
enum ieee80211_state, int);
|
|
};
|
|
#define RT2860_VAP(vap) ((struct rt2860_vap *)(vap))
|
|
|
|
struct rt2860_softc {
|
|
struct ieee80211com sc_ic;
|
|
struct ieee80211_ratectl_tx_status sc_txs;
|
|
struct mbufq sc_snd;
|
|
struct mtx sc_mtx;
|
|
device_t sc_dev;
|
|
bus_space_tag_t sc_st;
|
|
bus_space_handle_t sc_sh;
|
|
|
|
struct callout watchdog_ch;
|
|
|
|
int sc_invalid;
|
|
int sc_debug;
|
|
/*
|
|
* The same in both up to here
|
|
* ------------------------------------------------
|
|
*/
|
|
|
|
uint16_t (*sc_srom_read)(struct rt2860_softc *,
|
|
uint16_t);
|
|
void (*sc_node_free)(struct ieee80211_node *);
|
|
|
|
int sc_flags;
|
|
#define RT2860_ENABLED (1 << 0)
|
|
#define RT2860_ADVANCED_PS (1 << 1)
|
|
#define RT2860_PCIE (1 << 2)
|
|
#define RT2860_RUNNING (1 << 3)
|
|
|
|
struct ieee80211_node *wcid2ni[RT2860_WCID_MAX];
|
|
|
|
struct rt2860_tx_ring txq[6];
|
|
struct rt2860_rx_ring rxq;
|
|
|
|
SLIST_HEAD(, rt2860_tx_data) data_pool;
|
|
struct rt2860_tx_data data[RT2860_TX_POOL_COUNT];
|
|
bus_dma_tag_t txwi_dmat;
|
|
bus_dmamap_t txwi_map;
|
|
bus_dma_segment_t txwi_seg;
|
|
caddr_t txwi_vaddr;
|
|
|
|
int sc_tx_timer;
|
|
int mgtqid;
|
|
uint8_t qfullmsk;
|
|
|
|
uint16_t mac_ver;
|
|
uint16_t mac_rev;
|
|
uint16_t rf_rev;
|
|
uint8_t freq;
|
|
uint8_t ntxchains;
|
|
uint8_t nrxchains;
|
|
uint8_t pslevel;
|
|
int8_t txpow1[54];
|
|
int8_t txpow2[54];
|
|
int8_t rssi_2ghz[3];
|
|
int8_t rssi_5ghz[3];
|
|
uint8_t lna[4];
|
|
uint8_t rf24_20mhz;
|
|
uint8_t rf24_40mhz;
|
|
uint8_t patch_dac;
|
|
uint8_t rfswitch;
|
|
uint8_t ext_2ghz_lna;
|
|
uint8_t ext_5ghz_lna;
|
|
uint8_t calib_2ghz;
|
|
uint8_t calib_5ghz;
|
|
uint8_t txmixgain_2ghz;
|
|
uint8_t txmixgain_5ghz;
|
|
uint8_t tssi_2ghz[9];
|
|
uint8_t tssi_5ghz[9];
|
|
uint8_t step_2ghz;
|
|
uint8_t step_5ghz;
|
|
struct {
|
|
uint8_t reg;
|
|
uint8_t val;
|
|
} bbp[8], rf[10];
|
|
uint8_t leds;
|
|
uint16_t led[3];
|
|
uint32_t txpow20mhz[5];
|
|
uint32_t txpow40mhz_2ghz[5];
|
|
uint32_t txpow40mhz_5ghz[5];
|
|
|
|
struct rt2860_rx_radiotap_header sc_rxtap;
|
|
struct rt2860_tx_radiotap_header sc_txtap;
|
|
};
|
|
|
|
int rt2860_attach(device_t, int);
|
|
int rt2860_detach(void *);
|
|
void rt2860_shutdown(void *);
|
|
void rt2860_suspend(void *);
|
|
void rt2860_resume(void *);
|
|
void rt2860_intr(void *);
|
|
|
|
#define RAL_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
|
|
#define RAL_LOCK_ASSERT(sc) mtx_assert(&(sc)->sc_mtx, MA_OWNED)
|
|
#define RAL_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)
|