d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
449ebf135b
freebsd-dev/sys/dev/ice/ice_lib.c
Eric Joyner 7d7af7f85b ice(4): Update to 0.26.16 
Summary of changes:

- Assorted bug fixes
- Support for newer versions of the device firmware
- Suspend/resume support
- Support for Lenient Link Mode for E82X devices (e.g. can try to link with
  SFP/QSFP modules with bad EEPROMs)
- Adds port-level rx_discards sysctl, similar to ixl(4)'s

This version of the driver is intended to be used with DDP package 1.3.16.0,
which has already been updated in a previous commit.

Tested by:	Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after:	3 days
MFC with:	r365332, r365550
Sponsored by:	Intel Corporation
Differential Revision:	https://reviews.freebsd.org/D26322
2020-09-10 23:46:13 +00:00

8175 lines
241 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause */
/* Copyright (c) 2020, Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD$*/
/**
* @file ice_lib.c
* @brief Generic device setup and sysctl functions
*
* Library of generic device functions not specific to the networking stack.
*
* This includes hardware initialization functions, as well as handlers for
* many of the device sysctls used to probe driver status or tune specific
* behaviors.
*/
#include "ice_lib.h"
#include "ice_iflib.h"
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <machine/resource.h>
#include <net/if_dl.h>
#include <sys/firmware.h>
#include <sys/priv.h>
/**
* @var M_ICE
* @brief main ice driver allocation type
*
* malloc(9) allocation type used by the majority of memory allocations in the
* ice driver.
*/
MALLOC_DEFINE(M_ICE, "ice", "Intel(R) 100Gb Network Driver lib allocations");
/*
* Helper function prototypes
*/
static int ice_get_next_vsi(struct ice_vsi **all_vsi, int size);
static void ice_set_default_vsi_ctx(struct ice_vsi_ctx *ctx);
static void ice_set_rss_vsi_ctx(struct ice_vsi_ctx *ctx, enum ice_vsi_type type);
static int ice_setup_vsi_qmap(struct ice_vsi *vsi, struct ice_vsi_ctx *ctx);
static int ice_setup_tx_ctx(struct ice_tx_queue *txq,
struct ice_tlan_ctx *tlan_ctx, u16 pf_q);
static int ice_setup_rx_ctx(struct ice_rx_queue *rxq);
static int ice_is_rxq_ready(struct ice_hw *hw, int pf_q, u32 *reg);
static void ice_free_fltr_list(struct ice_list_head *list);
static int ice_add_mac_to_list(struct ice_vsi *vsi, struct ice_list_head *list,
const u8 *addr, enum ice_sw_fwd_act_type action);
static void ice_check_ctrlq_errors(struct ice_softc *sc, const char *qname,
struct ice_ctl_q_info *cq);
static void ice_process_link_event(struct ice_softc *sc, struct ice_rq_event_info *e);
static void ice_process_ctrlq_event(struct ice_softc *sc, const char *qname,
struct ice_rq_event_info *event);
static void ice_nvm_version_str(struct ice_hw *hw, struct sbuf *buf);
static void ice_active_pkg_version_str(struct ice_hw *hw, struct sbuf *buf);
static void ice_os_pkg_version_str(struct ice_hw *hw, struct sbuf *buf);
static bool ice_filter_is_mcast(struct ice_vsi *vsi, struct ice_fltr_info *info);
static u_int ice_sync_one_mcast_filter(void *p, struct sockaddr_dl *sdl, u_int errors);
static void ice_add_debug_tunables(struct ice_softc *sc);
static void ice_add_debug_sysctls(struct ice_softc *sc);
static void ice_vsi_set_rss_params(struct ice_vsi *vsi);
static void ice_get_default_rss_key(u8 *seed);
static int ice_set_rss_key(struct ice_vsi *vsi);
static int ice_set_rss_lut(struct ice_vsi *vsi);
static void ice_set_rss_flow_flds(struct ice_vsi *vsi);
static void ice_clean_vsi_rss_cfg(struct ice_vsi *vsi);
static const char *ice_aq_speed_to_str(struct ice_port_info *pi);
static const char *ice_requested_fec_mode(struct ice_port_info *pi);
static const char *ice_negotiated_fec_mode(struct ice_port_info *pi);
static const char *ice_autoneg_mode(struct ice_port_info *pi);
static const char *ice_flowcontrol_mode(struct ice_port_info *pi);
static void ice_print_bus_link_data(device_t dev, struct ice_hw *hw);
static void ice_set_pci_link_status_data(struct ice_hw *hw, u16 link_status);
static uint8_t ice_pcie_bandwidth_check(struct ice_softc *sc);
static uint64_t ice_pcie_bus_speed_to_rate(enum ice_pcie_bus_speed speed);
static int ice_pcie_lnk_width_to_int(enum ice_pcie_link_width width);
static uint64_t ice_phy_types_to_max_rate(struct ice_port_info *pi);
static void ice_add_sysctls_sw_stats(struct ice_vsi *vsi,
struct sysctl_ctx_list *ctx,
struct sysctl_oid *parent);
static void ice_setup_vsi_common(struct ice_softc *sc, struct ice_vsi *vsi,
enum ice_vsi_type type, int idx,
bool dynamic);
static void ice_handle_mib_change_event(struct ice_softc *sc,
struct ice_rq_event_info *event);
static void
ice_handle_lan_overflow_event(struct ice_softc *sc,
struct ice_rq_event_info *event);
static int ice_add_ethertype_to_list(struct ice_vsi *vsi,
struct ice_list_head *list,
u16 ethertype, u16 direction,
enum ice_sw_fwd_act_type action);
static void ice_add_rx_lldp_filter(struct ice_softc *sc);
static void ice_del_rx_lldp_filter(struct ice_softc *sc);
static u16 ice_aq_phy_types_to_sysctl_speeds(u64 phy_type_low,
u64 phy_type_high);
static void
ice_apply_saved_phy_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg);
static void
ice_apply_saved_fec_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg);
static void
ice_apply_saved_user_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg);
static void
ice_apply_saved_fc_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_set_phy_cfg_data *cfg);
static void
ice_print_ldo_tlv(struct ice_softc *sc,
struct ice_link_default_override_tlv *tlv);
static void
ice_sysctl_speeds_to_aq_phy_types(u16 sysctl_speeds, u64 *phy_type_low,
u64 *phy_type_high);
static int
ice_intersect_media_types_with_caps(struct ice_softc *sc, u16 sysctl_speeds,
u64 *phy_type_low, u64 *phy_type_high);
static int
ice_get_auto_speeds(struct ice_softc *sc, u64 *phy_type_low,
u64 *phy_type_high);
static void
ice_apply_supported_speed_filter(u64 *phy_type_low, u64 *phy_type_high);
static enum ice_status
ice_get_phy_types(struct ice_softc *sc, u64 *phy_type_low, u64 *phy_type_high);
static int ice_module_init(void);
static int ice_module_exit(void);
/*
* package version comparison functions
*/
static bool pkg_ver_empty(struct ice_pkg_ver *pkg_ver, u8 *pkg_name);
static int pkg_ver_compatible(struct ice_pkg_ver *pkg_ver);
/*
* dynamic sysctl handlers
*/
static int ice_sysctl_show_fw(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_pkg_version(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_os_pkg_version(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_dump_mac_filters(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_dump_vlan_filters(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_dump_ethertype_filters(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_dump_ethertype_mac_filters(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_current_speed(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_request_reset(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_dump_state_flags(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_fec_config(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_fc_config(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_negotiated_fc(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_negotiated_fec(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_type_low(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_type_high(SYSCTL_HANDLER_ARGS);
static int __ice_sysctl_phy_type_handler(SYSCTL_HANDLER_ARGS,
bool is_phy_type_high);
static int ice_sysctl_advertise_speed(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_rx_itr(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_tx_itr(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_fw_lldp_agent(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_fw_cur_lldp_persist_status(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_fw_dflt_lldp_persist_status(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_caps(SYSCTL_HANDLER_ARGS, u8 report_mode);
static int ice_sysctl_phy_sw_caps(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_nvm_caps(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_topo_caps(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_phy_link_status(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_read_i2c_diag_data(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_tx_cso_stat(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_rx_cso_stat(SYSCTL_HANDLER_ARGS);
static int ice_sysctl_pba_number(SYSCTL_HANDLER_ARGS);
/**
* ice_map_bar - Map PCIe BAR memory
* @dev: the PCIe device
* @bar: the BAR info structure
* @bar_num: PCIe BAR number
*
* Maps the specified PCIe BAR. Stores the mapping data in struct
* ice_bar_info.
*/
int
ice_map_bar(device_t dev, struct ice_bar_info *bar, int bar_num)
{
if (bar->res != NULL) {
device_printf(dev, "PCI BAR%d already mapped\n", bar_num);
return (EDOOFUS);
}
bar->rid = PCIR_BAR(bar_num);
bar->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &bar->rid,
RF_ACTIVE);
if (!bar->res) {
device_printf(dev, "PCI BAR%d mapping failed\n", bar_num);
return (ENXIO);
}
bar->tag = rman_get_bustag(bar->res);
bar->handle = rman_get_bushandle(bar->res);
bar->size = rman_get_size(bar->res);
return (0);
}
/**
* ice_free_bar - Free PCIe BAR memory
* @dev: the PCIe device
* @bar: the BAR info structure
*
* Frees the specified PCIe BAR, releasing its resources.
*/
void
ice_free_bar(device_t dev, struct ice_bar_info *bar)
{
if (bar->res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, bar->rid, bar->res);
bar->res = NULL;
}
/**
* ice_set_ctrlq_len - Configure ctrlq lengths for a device
* @hw: the device hardware structure
*
* Configures the control queues for the given device, setting up the
* specified lengths, prior to initializing hardware.
*/
void
ice_set_ctrlq_len(struct ice_hw *hw)
{
hw->adminq.num_rq_entries = ICE_AQ_LEN;
hw->adminq.num_sq_entries = ICE_AQ_LEN;
hw->adminq.rq_buf_size = ICE_AQ_MAX_BUF_LEN;
hw->adminq.sq_buf_size = ICE_AQ_MAX_BUF_LEN;
hw->mailboxq.num_rq_entries = ICE_MBXQ_LEN;
hw->mailboxq.num_sq_entries = ICE_MBXQ_LEN;
hw->mailboxq.rq_buf_size = ICE_MBXQ_MAX_BUF_LEN;
hw->mailboxq.sq_buf_size = ICE_MBXQ_MAX_BUF_LEN;
}
/**
* ice_get_next_vsi - Get the next available VSI slot
* @all_vsi: the VSI list
* @size: the size of the VSI list
*
* Returns the index to the first available VSI slot. Will return size (one
* past the last index) if there are no slots available.
*/
static int
ice_get_next_vsi(struct ice_vsi **all_vsi, int size)
{
int i;
for (i = 0; i < size; i++) {
if (all_vsi[i] == NULL)
return i;
}
return size;
}
/**
* ice_setup_vsi_common - Common VSI setup for both dynamic and static VSIs
* @sc: the device private softc structure
* @vsi: the VSI to setup
* @type: the VSI type of the new VSI
* @idx: the index in the all_vsi array to use
* @dynamic: whether this VSI memory was dynamically allocated
*
* Perform setup for a VSI that is common to both dynamically allocated VSIs
* and the static PF VSI which is embedded in the softc structure.
*/
static void
ice_setup_vsi_common(struct ice_softc *sc, struct ice_vsi *vsi,
enum ice_vsi_type type, int idx, bool dynamic)
{
/* Store important values in VSI struct */
vsi->type = type;
vsi->sc = sc;
vsi->idx = idx;
sc->all_vsi[idx] = vsi;
vsi->dynamic = dynamic;
/* Setup the VSI tunables now */
ice_add_vsi_tunables(vsi, sc->vsi_sysctls);
}
/**
* ice_alloc_vsi - Allocate a dynamic VSI
* @sc: device softc structure
* @type: VSI type
*
* Allocates a new dynamic VSI structure and inserts it into the VSI list.
*/
struct ice_vsi *
ice_alloc_vsi(struct ice_softc *sc, enum ice_vsi_type type)
{
struct ice_vsi *vsi;
int idx;
/* Find an open index for a new VSI to be allocated. If the returned
* index is >= the num_available_vsi then it means no slot is
* available.
*/
idx = ice_get_next_vsi(sc->all_vsi, sc->num_available_vsi);
if (idx >= sc->num_available_vsi) {
device_printf(sc->dev, "No available VSI slots\n");
return NULL;
}
vsi = (struct ice_vsi *)malloc(sizeof(*vsi), M_ICE, M_WAITOK|M_ZERO);
if (!vsi) {
device_printf(sc->dev, "Unable to allocate VSI memory\n");
return NULL;
}
ice_setup_vsi_common(sc, vsi, type, idx, true);
return vsi;
}
/**
* ice_setup_pf_vsi - Setup the PF VSI
* @sc: the device private softc
*
* Setup the PF VSI structure which is embedded as sc->pf_vsi in the device
* private softc. Unlike other VSIs, the PF VSI memory is allocated as part of
* the softc memory, instead of being dynamically allocated at creation.
*/
void
ice_setup_pf_vsi(struct ice_softc *sc)
{
ice_setup_vsi_common(sc, &sc->pf_vsi, ICE_VSI_PF, 0, false);
}
/**
* ice_alloc_vsi_qmap
* @vsi: VSI structure
* @max_tx_queues: Number of transmit queues to identify
* @max_rx_queues: Number of receive queues to identify
*
* Allocates a max_[t|r]x_queues array of words for the VSI where each
* word contains the index of the queue it represents. In here, all
* words are initialized to an index of ICE_INVALID_RES_IDX, indicating
* all queues for this VSI are not yet assigned an index and thus,
* not ready for use.
*
* Returns an error code on failure.
*/
int
ice_alloc_vsi_qmap(struct ice_vsi *vsi, const int max_tx_queues,
const int max_rx_queues)
{
struct ice_softc *sc = vsi->sc;
int i;
MPASS(max_tx_queues > 0);
MPASS(max_rx_queues > 0);
/* Allocate Tx queue mapping memory */
if (!(vsi->tx_qmap =
(u16 *) malloc(sizeof(u16) * max_tx_queues, M_ICE, M_WAITOK))) {
device_printf(sc->dev, "Unable to allocate Tx qmap memory\n");
return (ENOMEM);
}
/* Allocate Rx queue mapping memory */
if (!(vsi->rx_qmap =
(u16 *) malloc(sizeof(u16) * max_rx_queues, M_ICE, M_WAITOK))) {
device_printf(sc->dev, "Unable to allocate Rx qmap memory\n");
goto free_tx_qmap;
}
/* Mark every queue map as invalid to start with */
for (i = 0; i < max_tx_queues; i++) {
vsi->tx_qmap[i] = ICE_INVALID_RES_IDX;
}
for (i = 0; i < max_rx_queues; i++) {
vsi->rx_qmap[i] = ICE_INVALID_RES_IDX;
}
return 0;
free_tx_qmap:
free(vsi->tx_qmap, M_ICE);
vsi->tx_qmap = NULL;
return (ENOMEM);
}
/**
* ice_free_vsi_qmaps - Free the PF qmaps associated with a VSI
* @vsi: the VSI private structure
*
* Frees the PF qmaps associated with the given VSI. Generally this will be
* called by ice_release_vsi, but may need to be called during attach cleanup,
* depending on when the qmaps were allocated.
*/
void
ice_free_vsi_qmaps(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
if (vsi->tx_qmap) {
ice_resmgr_release_map(&sc->tx_qmgr, vsi->tx_qmap,
vsi->num_tx_queues);
free(vsi->tx_qmap, M_ICE);
vsi->tx_qmap = NULL;
}
if (vsi->rx_qmap) {
ice_resmgr_release_map(&sc->rx_qmgr, vsi->rx_qmap,
vsi->num_rx_queues);
free(vsi->rx_qmap, M_ICE);
vsi->rx_qmap = NULL;
}
}
/**
* ice_set_default_vsi_ctx - Setup default VSI context parameters
* @ctx: the VSI context to initialize
*
* Initialize and prepare a default VSI context for configuring a new VSI.
*/
static void
ice_set_default_vsi_ctx(struct ice_vsi_ctx *ctx)
{
u32 table = 0;
memset(&ctx->info, 0, sizeof(ctx->info));
/* VSI will be allocated from shared pool */
ctx->alloc_from_pool = true;
/* Enable source pruning by default */
ctx->info.sw_flags = ICE_AQ_VSI_SW_FLAG_SRC_PRUNE;
/* Traffic from VSI can be sent to LAN */
ctx->info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
/* Allow all packets untagged/tagged */
ctx->info.vlan_flags = ((ICE_AQ_VSI_VLAN_MODE_ALL &
ICE_AQ_VSI_VLAN_MODE_M) >>
ICE_AQ_VSI_VLAN_MODE_S);
/* Show VLAN/UP from packets in Rx descriptors */
ctx->info.vlan_flags |= ((ICE_AQ_VSI_VLAN_EMOD_STR_BOTH &
ICE_AQ_VSI_VLAN_EMOD_M) >>
ICE_AQ_VSI_VLAN_EMOD_S);
/* Have 1:1 UP mapping for both ingress/egress tables */
table |= ICE_UP_TABLE_TRANSLATE(0, 0);
table |= ICE_UP_TABLE_TRANSLATE(1, 1);
table |= ICE_UP_TABLE_TRANSLATE(2, 2);
table |= ICE_UP_TABLE_TRANSLATE(3, 3);
table |= ICE_UP_TABLE_TRANSLATE(4, 4);
table |= ICE_UP_TABLE_TRANSLATE(5, 5);
table |= ICE_UP_TABLE_TRANSLATE(6, 6);
table |= ICE_UP_TABLE_TRANSLATE(7, 7);
ctx->info.ingress_table = CPU_TO_LE32(table);
ctx->info.egress_table = CPU_TO_LE32(table);
/* Have 1:1 UP mapping for outer to inner UP table */
ctx->info.outer_up_table = CPU_TO_LE32(table);
/* No Outer tag support, so outer_tag_flags remains zero */
}
/**
* ice_set_rss_vsi_ctx - Setup VSI context parameters for RSS
* @ctx: the VSI context to configure
* @type: the VSI type
*
* Configures the VSI context for RSS, based on the VSI type.
*/
static void
ice_set_rss_vsi_ctx(struct ice_vsi_ctx *ctx, enum ice_vsi_type type)
{
u8 lut_type, hash_type;
switch (type) {
case ICE_VSI_PF:
lut_type = ICE_AQ_VSI_Q_OPT_RSS_LUT_PF;
hash_type = ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
break;
case ICE_VSI_VF:
lut_type = ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI;
hash_type = ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
break;
default:
/* Other VSI types do not support RSS */
return;
}
ctx->info.q_opt_rss = (((lut_type << ICE_AQ_VSI_Q_OPT_RSS_LUT_S) &
ICE_AQ_VSI_Q_OPT_RSS_LUT_M) |
((hash_type << ICE_AQ_VSI_Q_OPT_RSS_HASH_S) &
ICE_AQ_VSI_Q_OPT_RSS_HASH_M));
}
/**
* ice_setup_vsi_qmap - Setup the queue mapping for a VSI
* @vsi: the VSI to configure
* @ctx: the VSI context to configure
*
* Configures the context for the given VSI, setting up how the firmware
* should map the queues for this VSI.
*/
static int
ice_setup_vsi_qmap(struct ice_vsi *vsi, struct ice_vsi_ctx *ctx)
{
int pow = 0;
u16 qmap;
MPASS(vsi->rx_qmap != NULL);
/* TODO:
* Handle multiple Traffic Classes
* Handle scattered queues (for VFs)
*/
if (vsi->qmap_type != ICE_RESMGR_ALLOC_CONTIGUOUS)
return (EOPNOTSUPP);
ctx->info.mapping_flags |= CPU_TO_LE16(ICE_AQ_VSI_Q_MAP_CONTIG);
ctx->info.q_mapping[0] = CPU_TO_LE16(vsi->rx_qmap[0]);
ctx->info.q_mapping[1] = CPU_TO_LE16(vsi->num_rx_queues);
/* Calculate the next power-of-2 of number of queues */
if (vsi->num_rx_queues)
pow = flsl(vsi->num_rx_queues - 1);
/* Assign all the queues to traffic class zero */
qmap = (pow << ICE_AQ_VSI_TC_Q_NUM_S) & ICE_AQ_VSI_TC_Q_NUM_M;
ctx->info.tc_mapping[0] = CPU_TO_LE16(qmap);
return 0;
}
/**
* ice_initialize_vsi - Initialize a VSI for use
* @vsi: the vsi to initialize
*
* Initialize a VSI over the adminq and prepare it for operation.
*/
int
ice_initialize_vsi(struct ice_vsi *vsi)
{
struct ice_vsi_ctx ctx = { 0 };
struct ice_hw *hw = &vsi->sc->hw;
u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 };
enum ice_status status;
int err;
/* For now, we only have code supporting PF VSIs */
switch (vsi->type) {
case ICE_VSI_PF:
ctx.flags = ICE_AQ_VSI_TYPE_PF;
break;
default:
return (ENODEV);
}
ice_set_default_vsi_ctx(&ctx);
ice_set_rss_vsi_ctx(&ctx, vsi->type);
/* XXX: VSIs of other types may need different port info? */
ctx.info.sw_id = hw->port_info->sw_id;
/* Set some RSS parameters based on the VSI type */
ice_vsi_set_rss_params(vsi);
/* Initialize the Rx queue mapping for this VSI */
err = ice_setup_vsi_qmap(vsi, &ctx);
if (err) {
return err;
}
/* (Re-)add VSI to HW VSI handle list */
status = ice_add_vsi(hw, vsi->idx, &ctx, NULL);
if (status != 0) {
device_printf(vsi->sc->dev,
"Add VSI AQ call failed, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
vsi->info = ctx.info;
/* TODO: DCB traffic class support? */
max_txqs[0] = vsi->num_tx_queues;
status = ice_cfg_vsi_lan(hw->port_info, vsi->idx,
ICE_DFLT_TRAFFIC_CLASS, max_txqs);
if (status) {
device_printf(vsi->sc->dev,
"Failed VSI lan queue config, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
ice_deinit_vsi(vsi);
return (ENODEV);
}
/* Reset VSI stats */
ice_reset_vsi_stats(vsi);
return 0;
}
/**
* ice_deinit_vsi - Tell firmware to release resources for a VSI
* @vsi: the VSI to release
*
* Helper function which requests the firmware to release the hardware
* resources associated with a given VSI.
*/
void
ice_deinit_vsi(struct ice_vsi *vsi)
{
struct ice_vsi_ctx ctx = { 0 };
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
enum ice_status status;
/* Assert that the VSI pointer matches in the list */
MPASS(vsi == sc->all_vsi[vsi->idx]);
ctx.info = vsi->info;
status = ice_rm_vsi_lan_cfg(hw->port_info, vsi->idx);
if (status) {
/*
* This should only fail if the VSI handle is invalid, or if
* any of the nodes have leaf nodes which are still in use.
*/
device_printf(sc->dev,
"Unable to remove scheduler nodes for VSI %d, err %s\n",
vsi->idx, ice_status_str(status));
}
/* Tell firmware to release the VSI resources */
status = ice_free_vsi(hw, vsi->idx, &ctx, false, NULL);
if (status != 0) {
device_printf(sc->dev,
"Free VSI %u AQ call failed, err %s aq_err %s\n",
vsi->idx, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
}
/**
* ice_release_vsi - Release resources associated with a VSI
* @vsi: the VSI to release
*
* Release software and firmware resources associated with a VSI. Release the
* queue managers associated with this VSI. Also free the VSI structure memory
* if the VSI was allocated dynamically using ice_alloc_vsi().
*/
void
ice_release_vsi(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
int idx = vsi->idx;
/* Assert that the VSI pointer matches in the list */
MPASS(vsi == sc->all_vsi[idx]);
/* Cleanup RSS configuration */
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_RSS))
ice_clean_vsi_rss_cfg(vsi);
ice_del_vsi_sysctl_ctx(vsi);
ice_deinit_vsi(vsi);
ice_free_vsi_qmaps(vsi);
if (vsi->dynamic) {
free(sc->all_vsi[idx], M_ICE);
}
sc->all_vsi[idx] = NULL;
}
/**
* ice_aq_speed_to_rate - Convert AdminQ speed enum to baudrate
* @pi: port info data
*
* Returns the baudrate value for the current link speed of a given port.
*/
uint64_t
ice_aq_speed_to_rate(struct ice_port_info *pi)
{
switch (pi->phy.link_info.link_speed) {
case ICE_AQ_LINK_SPEED_100GB:
return IF_Gbps(100);
case ICE_AQ_LINK_SPEED_50GB:
return IF_Gbps(50);
case ICE_AQ_LINK_SPEED_40GB:
return IF_Gbps(40);
case ICE_AQ_LINK_SPEED_25GB:
return IF_Gbps(25);
case ICE_AQ_LINK_SPEED_10GB:
return IF_Gbps(10);
case ICE_AQ_LINK_SPEED_5GB:
return IF_Gbps(5);
case ICE_AQ_LINK_SPEED_2500MB:
return IF_Mbps(2500);
case ICE_AQ_LINK_SPEED_1000MB:
return IF_Mbps(1000);
case ICE_AQ_LINK_SPEED_100MB:
return IF_Mbps(100);
case ICE_AQ_LINK_SPEED_10MB:
return IF_Mbps(10);
case ICE_AQ_LINK_SPEED_UNKNOWN:
default:
/* return 0 if we don't know the link speed */
return 0;
}
}
/**
* ice_aq_speed_to_str - Convert AdminQ speed enum to string representation
* @pi: port info data
*
* Returns the string representation of the current link speed for a given
* port.
*/
static const char *
ice_aq_speed_to_str(struct ice_port_info *pi)
{
switch (pi->phy.link_info.link_speed) {
case ICE_AQ_LINK_SPEED_100GB:
return "100 Gbps";
case ICE_AQ_LINK_SPEED_50GB:
return "50 Gbps";
case ICE_AQ_LINK_SPEED_40GB:
return "40 Gbps";
case ICE_AQ_LINK_SPEED_25GB:
return "25 Gbps";
case ICE_AQ_LINK_SPEED_20GB:
return "20 Gbps";
case ICE_AQ_LINK_SPEED_10GB:
return "10 Gbps";
case ICE_AQ_LINK_SPEED_5GB:
return "5 Gbps";
case ICE_AQ_LINK_SPEED_2500MB:
return "2.5 Gbps";
case ICE_AQ_LINK_SPEED_1000MB:
return "1 Gbps";
case ICE_AQ_LINK_SPEED_100MB:
return "100 Mbps";
case ICE_AQ_LINK_SPEED_10MB:
return "10 Mbps";
case ICE_AQ_LINK_SPEED_UNKNOWN:
default:
return "Unknown speed";
}
}
/**
* ice_get_phy_type_low - Get media associated with phy_type_low
* @phy_type_low: the low 64bits of phy_type from the AdminQ
*
* Given the lower 64bits of the phy_type from the hardware, return the
* ifm_active bit associated. Return IFM_UNKNOWN when phy_type_low is unknown.
* Note that only one of ice_get_phy_type_low or ice_get_phy_type_high should
* be called. If phy_type_low is zero, call ice_phy_type_high.
*/
int
ice_get_phy_type_low(uint64_t phy_type_low)
{
switch (phy_type_low) {
case ICE_PHY_TYPE_LOW_100BASE_TX:
return IFM_100_TX;
case ICE_PHY_TYPE_LOW_100M_SGMII:
return IFM_100_SGMII;
case ICE_PHY_TYPE_LOW_1000BASE_T:
return IFM_1000_T;
case ICE_PHY_TYPE_LOW_1000BASE_SX:
return IFM_1000_SX;
case ICE_PHY_TYPE_LOW_1000BASE_LX:
return IFM_1000_LX;
case ICE_PHY_TYPE_LOW_1000BASE_KX:
return IFM_1000_KX;
case ICE_PHY_TYPE_LOW_1G_SGMII:
return IFM_1000_SGMII;
case ICE_PHY_TYPE_LOW_2500BASE_T:
return IFM_2500_T;
case ICE_PHY_TYPE_LOW_2500BASE_X:
return IFM_2500_X;
case ICE_PHY_TYPE_LOW_2500BASE_KX:
return IFM_2500_KX;
case ICE_PHY_TYPE_LOW_5GBASE_T:
return IFM_5000_T;
case ICE_PHY_TYPE_LOW_5GBASE_KR:
return IFM_5000_KR;
case ICE_PHY_TYPE_LOW_10GBASE_T:
return IFM_10G_T;
case ICE_PHY_TYPE_LOW_10G_SFI_DA:
return IFM_10G_TWINAX;
case ICE_PHY_TYPE_LOW_10GBASE_SR:
return IFM_10G_SR;
case ICE_PHY_TYPE_LOW_10GBASE_LR:
return IFM_10G_LR;
case ICE_PHY_TYPE_LOW_10GBASE_KR_CR1:
return IFM_10G_KR;
case ICE_PHY_TYPE_LOW_10G_SFI_AOC_ACC:
return IFM_10G_AOC;
case ICE_PHY_TYPE_LOW_10G_SFI_C2C:
return IFM_10G_SFI;
case ICE_PHY_TYPE_LOW_25GBASE_T:
return IFM_25G_T;
case ICE_PHY_TYPE_LOW_25GBASE_CR:
return IFM_25G_CR;
case ICE_PHY_TYPE_LOW_25GBASE_CR_S:
return IFM_25G_CR_S;
case ICE_PHY_TYPE_LOW_25GBASE_CR1:
return IFM_25G_CR1;
case ICE_PHY_TYPE_LOW_25GBASE_SR:
return IFM_25G_SR;
case ICE_PHY_TYPE_LOW_25GBASE_LR:
return IFM_25G_LR;
case ICE_PHY_TYPE_LOW_25GBASE_KR:
return IFM_25G_KR;
case ICE_PHY_TYPE_LOW_25GBASE_KR_S:
return IFM_25G_KR_S;
case ICE_PHY_TYPE_LOW_25GBASE_KR1:
return IFM_25G_KR1;
case ICE_PHY_TYPE_LOW_25G_AUI_AOC_ACC:
return IFM_25G_AOC;
case ICE_PHY_TYPE_LOW_25G_AUI_C2C:
return IFM_25G_AUI;
case ICE_PHY_TYPE_LOW_40GBASE_CR4:
return IFM_40G_CR4;
case ICE_PHY_TYPE_LOW_40GBASE_SR4:
return IFM_40G_SR4;
case ICE_PHY_TYPE_LOW_40GBASE_LR4:
return IFM_40G_LR4;
case ICE_PHY_TYPE_LOW_40GBASE_KR4:
return IFM_40G_KR4;
case ICE_PHY_TYPE_LOW_40G_XLAUI_AOC_ACC:
return IFM_40G_XLAUI_AC;
case ICE_PHY_TYPE_LOW_40G_XLAUI:
return IFM_40G_XLAUI;
case ICE_PHY_TYPE_LOW_50GBASE_CR2:
return IFM_50G_CR2;
case ICE_PHY_TYPE_LOW_50GBASE_SR2:
return IFM_50G_SR2;
case ICE_PHY_TYPE_LOW_50GBASE_LR2:
return IFM_50G_LR2;
case ICE_PHY_TYPE_LOW_50GBASE_KR2:
return IFM_50G_KR2;
case ICE_PHY_TYPE_LOW_50G_LAUI2_AOC_ACC:
return IFM_50G_LAUI2_AC;
case ICE_PHY_TYPE_LOW_50G_LAUI2:
return IFM_50G_LAUI2;
case ICE_PHY_TYPE_LOW_50G_AUI2_AOC_ACC:
return IFM_50G_AUI2_AC;
case ICE_PHY_TYPE_LOW_50G_AUI2:
return IFM_50G_AUI2;
case ICE_PHY_TYPE_LOW_50GBASE_CP:
return IFM_50G_CP;
case ICE_PHY_TYPE_LOW_50GBASE_SR:
return IFM_50G_SR;
case ICE_PHY_TYPE_LOW_50GBASE_FR:
return IFM_50G_FR;
case ICE_PHY_TYPE_LOW_50GBASE_LR:
return IFM_50G_LR;
case ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4:
return IFM_50G_KR_PAM4;
case ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC:
return IFM_50G_AUI1_AC;
case ICE_PHY_TYPE_LOW_50G_AUI1:
return IFM_50G_AUI1;
case ICE_PHY_TYPE_LOW_100GBASE_CR4:
return IFM_100G_CR4;
case ICE_PHY_TYPE_LOW_100GBASE_SR4:
return IFM_100G_SR4;
case ICE_PHY_TYPE_LOW_100GBASE_LR4:
return IFM_100G_LR4;
case ICE_PHY_TYPE_LOW_100GBASE_KR4:
return IFM_100G_KR4;
case ICE_PHY_TYPE_LOW_100G_CAUI4_AOC_ACC:
return IFM_100G_CAUI4_AC;
case ICE_PHY_TYPE_LOW_100G_CAUI4:
return IFM_100G_CAUI4;
case ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC:
return IFM_100G_AUI4_AC;
case ICE_PHY_TYPE_LOW_100G_AUI4:
return IFM_100G_AUI4;
case ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4:
return IFM_100G_CR_PAM4;
case ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4:
return IFM_100G_KR_PAM4;
case ICE_PHY_TYPE_LOW_100GBASE_CP2:
return IFM_100G_CP2;
case ICE_PHY_TYPE_LOW_100GBASE_SR2:
return IFM_100G_SR2;
case ICE_PHY_TYPE_LOW_100GBASE_DR:
return IFM_100G_DR;
default:
return IFM_UNKNOWN;
}
}
/**
* ice_get_phy_type_high - Get media associated with phy_type_high
* @phy_type_high: the upper 64bits of phy_type from the AdminQ
*
* Given the upper 64bits of the phy_type from the hardware, return the
* ifm_active bit associated. Return IFM_UNKNOWN on an unknown value. Note
* that only one of ice_get_phy_type_low or ice_get_phy_type_high should be
* called. If phy_type_high is zero, call ice_get_phy_type_low.
*/
int
ice_get_phy_type_high(uint64_t phy_type_high)
{
switch (phy_type_high) {
case ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4:
return IFM_100G_KR2_PAM4;
case ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC:
return IFM_100G_CAUI2_AC;
case ICE_PHY_TYPE_HIGH_100G_CAUI2:
return IFM_100G_CAUI2;
case ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC:
return IFM_100G_AUI2_AC;
case ICE_PHY_TYPE_HIGH_100G_AUI2:
return IFM_100G_AUI2;
default:
return IFM_UNKNOWN;
}
}
/**
* ice_phy_types_to_max_rate - Returns port's max supported baudrate
* @pi: port info struct
*
* ice_aq_get_phy_caps() w/ ICE_AQC_REPORT_TOPO_CAP parameter needs to have
* been called before this function for it to work.
*/
static uint64_t
ice_phy_types_to_max_rate(struct ice_port_info *pi)
{
uint64_t phy_low = pi->phy.phy_type_low;
uint64_t phy_high = pi->phy.phy_type_high;
uint64_t max_rate = 0;
int bit;
/*
* These are based on the indices used in the BIT() macros for
* ICE_PHY_TYPE_LOW_*
*/
static const uint64_t phy_rates[] = {
IF_Mbps(100),
IF_Mbps(100),
IF_Gbps(1ULL),
IF_Gbps(1ULL),
IF_Gbps(1ULL),
IF_Gbps(1ULL),
IF_Gbps(1ULL),
IF_Mbps(2500ULL),
IF_Mbps(2500ULL),
IF_Mbps(2500ULL),
IF_Gbps(5ULL),
IF_Gbps(5ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(10ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(25ULL),
IF_Gbps(40ULL),
IF_Gbps(40ULL),
IF_Gbps(40ULL),
IF_Gbps(40ULL),
IF_Gbps(40ULL),
IF_Gbps(40ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(50ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
/* These rates are for ICE_PHY_TYPE_HIGH_* */
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL),
IF_Gbps(100ULL)
};
/* coverity[address_of] */
for_each_set_bit(bit, &phy_high, 64)
if ((bit + 64) < (int)ARRAY_SIZE(phy_rates))
max_rate = uqmax(max_rate, phy_rates[(bit + 64)]);
/* coverity[address_of] */
for_each_set_bit(bit, &phy_low, 64)
max_rate = uqmax(max_rate, phy_rates[bit]);
return (max_rate);
}
/* The if_media type is split over the original 5 bit media variant field,
* along with extended types using up extra bits in the options section.
* We want to convert this split number into a bitmap index, so we reverse the
* calculation of IFM_X here.
*/
#define IFM_IDX(x) (((x) & IFM_TMASK) | \
(((x) & IFM_ETH_XTYPE) >> IFM_ETH_XSHIFT))
/**
* ice_add_media_types - Add supported media types to the media structure
* @sc: ice private softc structure
* @media: ifmedia structure to setup
*
* Looks up the supported phy types, and initializes the various media types
* available.
*
* @pre this function must be protected from being called while another thread
* is accessing the ifmedia types.
*/
enum ice_status
ice_add_media_types(struct ice_softc *sc, struct ifmedia *media)
{
enum ice_status status;
uint64_t phy_low, phy_high;
int bit;
ASSERT_CFG_LOCKED(sc);
/* the maximum possible media type index is 511. We probably don't
* need most of this space, but this ensures future compatibility when
* additional media types are used.
*/
ice_declare_bitmap(already_added, 511);
/* Remove all previous media types */
ifmedia_removeall(media);
status = ice_get_phy_types(sc, &phy_low, &phy_high);
if (status != ICE_SUCCESS) {
/* Function already prints appropriate error
* message
*/
return (status);
}
/* make sure the added bitmap is zero'd */
memset(already_added, 0, sizeof(already_added));
/* coverity[address_of] */
for_each_set_bit(bit, &phy_low, 64) {
uint64_t type = BIT_ULL(bit);
int ostype;
/* get the OS media type */
ostype = ice_get_phy_type_low(type);
/* don't bother adding the unknown type */
if (ostype == IFM_UNKNOWN)
continue;
/* only add each media type to the list once */
if (ice_is_bit_set(already_added, IFM_IDX(ostype)))
continue;
ifmedia_add(media, IFM_ETHER | ostype, 0, NULL);
ice_set_bit(IFM_IDX(ostype), already_added);
}
/* coverity[address_of] */
for_each_set_bit(bit, &phy_high, 64) {
uint64_t type = BIT_ULL(bit);
int ostype;
/* get the OS media type */
ostype = ice_get_phy_type_high(type);
/* don't bother adding the unknown type */
if (ostype == IFM_UNKNOWN)
continue;
/* only add each media type to the list once */
if (ice_is_bit_set(already_added, IFM_IDX(ostype)))
continue;
ifmedia_add(media, IFM_ETHER | ostype, 0, NULL);
ice_set_bit(IFM_IDX(ostype), already_added);
}
/* Use autoselect media by default */
ifmedia_add(media, IFM_ETHER | IFM_AUTO, 0, NULL);
ifmedia_set(media, IFM_ETHER | IFM_AUTO);
return (ICE_SUCCESS);
}
/**
* ice_configure_rxq_interrupts - Configure HW Rx queues for MSI-X interrupts
* @vsi: the VSI to configure
*
* Called when setting up MSI-X interrupts to configure the Rx hardware queues.
*/
void
ice_configure_rxq_interrupts(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
for (i = 0; i < vsi->num_rx_queues; i++) {
struct ice_rx_queue *rxq = &vsi->rx_queues[i];
u32 val;
val = (QINT_RQCTL_CAUSE_ENA_M |
(ICE_RX_ITR << QINT_RQCTL_ITR_INDX_S) |
(rxq->irqv->me << QINT_RQCTL_MSIX_INDX_S));
wr32(hw, QINT_RQCTL(vsi->rx_qmap[rxq->me]), val);
}
ice_flush(hw);
}
/**
* ice_configure_txq_interrupts - Configure HW Tx queues for MSI-X interrupts
* @vsi: the VSI to configure
*
* Called when setting up MSI-X interrupts to configure the Tx hardware queues.
*/
void
ice_configure_txq_interrupts(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
for (i = 0; i < vsi->num_tx_queues; i++) {
struct ice_tx_queue *txq = &vsi->tx_queues[i];
u32 val;
val = (QINT_TQCTL_CAUSE_ENA_M |
(ICE_TX_ITR << QINT_TQCTL_ITR_INDX_S) |
(txq->irqv->me << QINT_TQCTL_MSIX_INDX_S));
wr32(hw, QINT_TQCTL(vsi->tx_qmap[txq->me]), val);
}
ice_flush(hw);
}
/**
* ice_flush_rxq_interrupts - Unconfigure Hw Rx queues MSI-X interrupt cause
* @vsi: the VSI to configure
*
* Unset the CAUSE_ENA flag of the TQCTL register for each queue, then trigger
* a software interrupt on that cause. This is required as part of the Rx
* queue disable logic to dissociate the Rx queue from the interrupt.
*
* Note: this function must be called prior to disabling Rx queues with
* ice_control_rx_queues, otherwise the Rx queue may not be disabled properly.
*/
void
ice_flush_rxq_interrupts(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
for (i = 0; i < vsi->num_rx_queues; i++) {
struct ice_rx_queue *rxq = &vsi->rx_queues[i];
u32 reg, val;
/* Clear the CAUSE_ENA flag */
reg = vsi->rx_qmap[rxq->me];
val = rd32(hw, QINT_RQCTL(reg));
val &= ~QINT_RQCTL_CAUSE_ENA_M;
wr32(hw, QINT_RQCTL(reg), val);
ice_flush(hw);
/* Trigger a software interrupt to complete interrupt
* dissociation.
*/
wr32(hw, GLINT_DYN_CTL(rxq->irqv->me),
GLINT_DYN_CTL_SWINT_TRIG_M | GLINT_DYN_CTL_INTENA_MSK_M);
}
}
/**
* ice_flush_txq_interrupts - Unconfigure Hw Tx queues MSI-X interrupt cause
* @vsi: the VSI to configure
*
* Unset the CAUSE_ENA flag of the TQCTL register for each queue, then trigger
* a software interrupt on that cause. This is required as part of the Tx
* queue disable logic to dissociate the Tx queue from the interrupt.
*
* Note: this function must be called prior to ice_vsi_disable_tx, otherwise
* the Tx queue disable may not complete properly.
*/
void
ice_flush_txq_interrupts(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
for (i = 0; i < vsi->num_tx_queues; i++) {
struct ice_tx_queue *txq = &vsi->tx_queues[i];
u32 reg, val;
/* Clear the CAUSE_ENA flag */
reg = vsi->tx_qmap[txq->me];
val = rd32(hw, QINT_TQCTL(reg));
val &= ~QINT_TQCTL_CAUSE_ENA_M;
wr32(hw, QINT_TQCTL(reg), val);
ice_flush(hw);
/* Trigger a software interrupt to complete interrupt
* dissociation.
*/
wr32(hw, GLINT_DYN_CTL(txq->irqv->me),
GLINT_DYN_CTL_SWINT_TRIG_M | GLINT_DYN_CTL_INTENA_MSK_M);
}
}
/**
* ice_configure_rx_itr - Configure the Rx ITR settings for this VSI
* @vsi: the VSI to configure
*
* Program the hardware ITR registers with the settings for this VSI.
*/
void
ice_configure_rx_itr(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
/* TODO: Handle per-queue/per-vector ITR? */
for (i = 0; i < vsi->num_rx_queues; i++) {
struct ice_rx_queue *rxq = &vsi->rx_queues[i];
wr32(hw, GLINT_ITR(ICE_RX_ITR, rxq->irqv->me),
ice_itr_to_reg(hw, vsi->rx_itr));
}
ice_flush(hw);
}
/**
* ice_configure_tx_itr - Configure the Tx ITR settings for this VSI
* @vsi: the VSI to configure
*
* Program the hardware ITR registers with the settings for this VSI.
*/
void
ice_configure_tx_itr(struct ice_vsi *vsi)
{
struct ice_hw *hw = &vsi->sc->hw;
int i;
/* TODO: Handle per-queue/per-vector ITR? */
for (i = 0; i < vsi->num_tx_queues; i++) {
struct ice_tx_queue *txq = &vsi->tx_queues[i];
wr32(hw, GLINT_ITR(ICE_TX_ITR, txq->irqv->me),
ice_itr_to_reg(hw, vsi->tx_itr));
}
ice_flush(hw);
}
/**
* ice_setup_tx_ctx - Setup an ice_tlan_ctx structure for a queue
* @txq: the Tx queue to configure
* @tlan_ctx: the Tx LAN queue context structure to initialize
* @pf_q: real queue number
*/
static int
ice_setup_tx_ctx(struct ice_tx_queue *txq, struct ice_tlan_ctx *tlan_ctx, u16 pf_q)
{
struct ice_vsi *vsi = txq->vsi;
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
tlan_ctx->port_num = hw->port_info->lport;
/* number of descriptors in the queue */
tlan_ctx->qlen = txq->desc_count;
/* set the transmit queue base address, defined in 128 byte units */
tlan_ctx->base = txq->tx_paddr >> 7;
tlan_ctx->pf_num = hw->pf_id;
/* For now, we only have code supporting PF VSIs */
switch (vsi->type) {
case ICE_VSI_PF:
tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_PF;
break;
default:
return (ENODEV);
}
tlan_ctx->src_vsi = ice_get_hw_vsi_num(hw, vsi->idx);
/* Enable TSO */
tlan_ctx->tso_ena = 1;
tlan_ctx->internal_usage_flag = 1;
tlan_ctx->tso_qnum = pf_q;
/*
* Stick with the older legacy Tx queue interface, instead of the new
* advanced queue interface.
*/
tlan_ctx->legacy_int = 1;
/* Descriptor WB mode */
tlan_ctx->wb_mode = 0;
return (0);
}
/**
* ice_cfg_vsi_for_tx - Configure the hardware for Tx
* @vsi: the VSI to configure
*
* Configure the device Tx queues through firmware AdminQ commands. After
* this, Tx queues will be ready for transmit.
*/
int
ice_cfg_vsi_for_tx(struct ice_vsi *vsi)
{
struct ice_aqc_add_tx_qgrp *qg;
struct ice_hw *hw = &vsi->sc->hw;
device_t dev = vsi->sc->dev;
enum ice_status status;
int i;
int err = 0;
u16 qg_size, pf_q;
qg_size = ice_struct_size(qg, txqs, 1);
qg = (struct ice_aqc_add_tx_qgrp *)malloc(qg_size, M_ICE, M_NOWAIT|M_ZERO);
if (!qg)
return (ENOMEM);
qg->num_txqs = 1;
for (i = 0; i < vsi->num_tx_queues; i++) {
struct ice_tlan_ctx tlan_ctx = { 0 };
struct ice_tx_queue *txq = &vsi->tx_queues[i];
pf_q = vsi->tx_qmap[txq->me];
qg->txqs[0].txq_id = htole16(pf_q);
err = ice_setup_tx_ctx(txq, &tlan_ctx, pf_q);
if (err)
goto free_txqg;
ice_set_ctx(hw, (u8 *)&tlan_ctx, qg->txqs[0].txq_ctx,
ice_tlan_ctx_info);
status = ice_ena_vsi_txq(hw->port_info, vsi->idx, 0,
i, 1, qg, qg_size, NULL);
if (status) {
device_printf(dev,
"Failed to set LAN Tx queue context, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
err = ENODEV;
goto free_txqg;
}
/* Keep track of the Tx queue TEID */
if (pf_q == le16toh(qg->txqs[0].txq_id))
txq->q_teid = le32toh(qg->txqs[0].q_teid);
}
free_txqg:
free(qg, M_ICE);
return (err);
}
/**
* ice_setup_rx_ctx - Setup an Rx context structure for a receive queue
* @rxq: the receive queue to program
*
* Setup an Rx queue context structure and program it into the hardware
* registers. This is a necessary step for enabling the Rx queue.
*
* @pre the VSI associated with this queue must have initialized mbuf_sz
*/
static int
ice_setup_rx_ctx(struct ice_rx_queue *rxq)
{
struct ice_rlan_ctx rlan_ctx = {0};
struct ice_vsi *vsi = rxq->vsi;
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
enum ice_status status;
u32 rxdid = ICE_RXDID_FLEX_NIC;
u32 regval;
u16 pf_q;
pf_q = vsi->rx_qmap[rxq->me];
/* set the receive queue base address, defined in 128 byte units */
rlan_ctx.base = rxq->rx_paddr >> 7;
rlan_ctx.qlen = rxq->desc_count;
rlan_ctx.dbuf = vsi->mbuf_sz >> ICE_RLAN_CTX_DBUF_S;
/* use 32 byte descriptors */
rlan_ctx.dsize = 1;
/* Strip the Ethernet CRC bytes before the packet is posted to the
* host memory.
*/
rlan_ctx.crcstrip = 1;
rlan_ctx.l2tsel = 1;
/* don't do header splitting */
rlan_ctx.dtype = ICE_RX_DTYPE_NO_SPLIT;
rlan_ctx.hsplit_0 = ICE_RLAN_RX_HSPLIT_0_NO_SPLIT;
rlan_ctx.hsplit_1 = ICE_RLAN_RX_HSPLIT_1_NO_SPLIT;
/* strip VLAN from inner headers */
rlan_ctx.showiv = 1;
rlan_ctx.rxmax = min(vsi->max_frame_size,
ICE_MAX_RX_SEGS * vsi->mbuf_sz);
rlan_ctx.lrxqthresh = 1;
if (vsi->type != ICE_VSI_VF) {
regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
regval &= ~QRXFLXP_CNTXT_RXDID_IDX_M;
regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
QRXFLXP_CNTXT_RXDID_IDX_M;
regval &= ~QRXFLXP_CNTXT_RXDID_PRIO_M;
regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
QRXFLXP_CNTXT_RXDID_PRIO_M;
wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
}
status = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
if (status) {
device_printf(sc->dev,
"Failed to set LAN Rx queue context, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
wr32(hw, rxq->tail, 0);
return 0;
}
/**
* ice_cfg_vsi_for_rx - Configure the hardware for Rx
* @vsi: the VSI to configure
*
* Prepare an Rx context descriptor and configure the device to receive
* traffic.
*
* @pre the VSI must have initialized mbuf_sz
*/
int
ice_cfg_vsi_for_rx(struct ice_vsi *vsi)
{
int i, err;
for (i = 0; i < vsi->num_rx_queues; i++) {
MPASS(vsi->mbuf_sz > 0);
err = ice_setup_rx_ctx(&vsi->rx_queues[i]);
if (err)
return err;
}
return (0);
}
/**
* ice_is_rxq_ready - Check if an Rx queue is ready
* @hw: ice hw structure
* @pf_q: absolute PF queue index to check
* @reg: on successful return, contains qrx_ctrl contents
*
* Reads the QRX_CTRL register and verifies if the queue is in a consistent
* state. That is, QENA_REQ matches QENA_STAT. Used to check before making
* a request to change the queue, as well as to verify the request has
* finished. The queue should change status within a few microseconds, so we
* use a small delay while polling the register.
*
* Returns an error code if the queue does not update after a few retries.
*/
static int
ice_is_rxq_ready(struct ice_hw *hw, int pf_q, u32 *reg)
{
u32 qrx_ctrl, qena_req, qena_stat;
int i;
for (i = 0; i < ICE_Q_WAIT_RETRY_LIMIT; i++) {
qrx_ctrl = rd32(hw, QRX_CTRL(pf_q));
qena_req = (qrx_ctrl >> QRX_CTRL_QENA_REQ_S) & 1;
qena_stat = (qrx_ctrl >> QRX_CTRL_QENA_STAT_S) & 1;
/* if the request and status bits equal, then the queue is
* fully disabled or enabled.
*/
if (qena_req == qena_stat) {
*reg = qrx_ctrl;
return (0);
}
/* wait a few microseconds before we check again */
DELAY(10);
}
return (ETIMEDOUT);
}
/**
* ice_control_rx_queues - Configure hardware to start or stop the Rx queues
* @vsi: VSI to enable/disable queues
* @enable: true to enable queues, false to disable
*
* Control the Rx queues through the QRX_CTRL register, enabling or disabling
* them. Wait for the appropriate time to ensure that the queues have actually
* reached the expected state.
*/
int
ice_control_rx_queues(struct ice_vsi *vsi, bool enable)
{
struct ice_hw *hw = &vsi->sc->hw;
device_t dev = vsi->sc->dev;
u32 qrx_ctrl = 0;
int i, err;
/* TODO: amortize waits by changing all queues up front and then
* checking their status afterwards. This will become more necessary
* when we have a large number of queues.
*/
for (i = 0; i < vsi->num_rx_queues; i++) {
struct ice_rx_queue *rxq = &vsi->rx_queues[i];
int pf_q = vsi->rx_qmap[rxq->me];
err = ice_is_rxq_ready(hw, pf_q, &qrx_ctrl);
if (err) {
device_printf(dev,
"Rx queue %d is not ready\n",
pf_q);
return err;
}
/* Skip if the queue is already in correct state */
if (enable == !!(qrx_ctrl & QRX_CTRL_QENA_STAT_M))
continue;
if (enable)
qrx_ctrl |= QRX_CTRL_QENA_REQ_M;
else
qrx_ctrl &= ~QRX_CTRL_QENA_REQ_M;
wr32(hw, QRX_CTRL(pf_q), qrx_ctrl);
/* wait for the queue to finalize the request */
err = ice_is_rxq_ready(hw, pf_q, &qrx_ctrl);
if (err) {
device_printf(dev,
"Rx queue %d %sable timeout\n",
pf_q, (enable ? "en" : "dis"));
return err;
}
/* this should never happen */
if (enable != !!(qrx_ctrl & QRX_CTRL_QENA_STAT_M)) {
device_printf(dev,
"Rx queue %d invalid state\n",
pf_q);
return (EDOOFUS);
}
}
return (0);
}
/**
* ice_add_mac_to_list - Add MAC filter to a MAC filter list
* @vsi: the VSI to forward to
* @list: list which contains MAC filter entries
* @addr: the MAC address to be added
* @action: filter action to perform on match
*
* Adds a MAC address filter to the list which will be forwarded to firmware
* to add a series of MAC address filters.
*
* Returns 0 on success, and an error code on failure.
*
*/
static int
ice_add_mac_to_list(struct ice_vsi *vsi, struct ice_list_head *list,
const u8 *addr, enum ice_sw_fwd_act_type action)
{
struct ice_fltr_list_entry *entry;
entry = (__typeof(entry))malloc(sizeof(*entry), M_ICE, M_NOWAIT|M_ZERO);
if (!entry)
return (ENOMEM);
entry->fltr_info.flag = ICE_FLTR_TX;
entry->fltr_info.src_id = ICE_SRC_ID_VSI;
entry->fltr_info.lkup_type = ICE_SW_LKUP_MAC;
entry->fltr_info.fltr_act = action;
entry->fltr_info.vsi_handle = vsi->idx;
bcopy(addr, entry->fltr_info.l_data.mac.mac_addr, ETHER_ADDR_LEN);
LIST_ADD(&entry->list_entry, list);
return 0;
}
/**
* ice_free_fltr_list - Free memory associated with a MAC address list
* @list: the list to free
*
* Free the memory of each entry associated with the list.
*/
static void
ice_free_fltr_list(struct ice_list_head *list)
{
struct ice_fltr_list_entry *e, *tmp;
LIST_FOR_EACH_ENTRY_SAFE(e, tmp, list, ice_fltr_list_entry, list_entry) {
LIST_DEL(&e->list_entry);
free(e, M_ICE);
}
}
/**
* ice_add_vsi_mac_filter - Add a MAC address filter for a VSI
* @vsi: the VSI to add the filter for
* @addr: MAC address to add a filter for
*
* Add a MAC address filter for a given VSI. This is a wrapper around
* ice_add_mac to simplify the interface. First, it only accepts a single
* address, so we don't have to mess around with the list setup in other
* functions. Second, it ignores the ICE_ERR_ALREADY_EXIST error, so that
* callers don't need to worry about attempting to add the same filter twice.
*/
int
ice_add_vsi_mac_filter(struct ice_vsi *vsi, const u8 *addr)
{
struct ice_list_head mac_addr_list;
struct ice_hw *hw = &vsi->sc->hw;
device_t dev = vsi->sc->dev;
enum ice_status status;
int err = 0;
INIT_LIST_HEAD(&mac_addr_list);
err = ice_add_mac_to_list(vsi, &mac_addr_list, addr, ICE_FWD_TO_VSI);
if (err)
goto free_mac_list;
status = ice_add_mac(hw, &mac_addr_list);
if (status == ICE_ERR_ALREADY_EXISTS) {
; /* Don't complain if we try to add a filter that already exists */
} else if (status) {
device_printf(dev,
"Failed to add a filter for MAC %6D, err %s aq_err %s\n",
addr, ":",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
}
free_mac_list:
ice_free_fltr_list(&mac_addr_list);
return err;
}
/**
* ice_cfg_pf_default_mac_filters - Setup default unicast and broadcast addrs
* @sc: device softc structure
*
* Program the default unicast and broadcast filters for the PF VSI.
*/
int
ice_cfg_pf_default_mac_filters(struct ice_softc *sc)
{
struct ice_vsi *vsi = &sc->pf_vsi;
struct ice_hw *hw = &sc->hw;
int err;
/* Add the LAN MAC address */
err = ice_add_vsi_mac_filter(vsi, hw->port_info->mac.lan_addr);
if (err)
return err;
/* Add the broadcast address */
err = ice_add_vsi_mac_filter(vsi, broadcastaddr);
if (err)
return err;
return (0);
}
/**
* ice_remove_vsi_mac_filter - Remove a MAC address filter for a VSI
* @vsi: the VSI to add the filter for
* @addr: MAC address to remove a filter for
*
* Remove a MAC address filter from a given VSI. This is a wrapper around
* ice_remove_mac to simplify the interface. First, it only accepts a single
* address, so we don't have to mess around with the list setup in other
* functions. Second, it ignores the ICE_ERR_DOES_NOT_EXIST error, so that
* callers don't need to worry about attempting to remove filters which
* haven't yet been added.
*/
int
ice_remove_vsi_mac_filter(struct ice_vsi *vsi, const u8 *addr)
{
struct ice_list_head mac_addr_list;
struct ice_hw *hw = &vsi->sc->hw;
device_t dev = vsi->sc->dev;
enum ice_status status;
int err = 0;
INIT_LIST_HEAD(&mac_addr_list);
err = ice_add_mac_to_list(vsi, &mac_addr_list, addr, ICE_FWD_TO_VSI);
if (err)
goto free_mac_list;
status = ice_remove_mac(hw, &mac_addr_list);
if (status == ICE_ERR_DOES_NOT_EXIST) {
; /* Don't complain if we try to remove a filter that doesn't exist */
} else if (status) {
device_printf(dev,
"Failed to remove a filter for MAC %6D, err %s aq_err %s\n",
addr, ":",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
}
free_mac_list:
ice_free_fltr_list(&mac_addr_list);
return err;
}
/**
* ice_rm_pf_default_mac_filters - Remove default unicast and broadcast addrs
* @sc: device softc structure
*
* Remove the default unicast and broadcast filters from the PF VSI.
*/
int
ice_rm_pf_default_mac_filters(struct ice_softc *sc)
{
struct ice_vsi *vsi = &sc->pf_vsi;
struct ice_hw *hw = &sc->hw;
int err;
/* Remove the LAN MAC address */
err = ice_remove_vsi_mac_filter(vsi, hw->port_info->mac.lan_addr);
if (err)
return err;
/* Remove the broadcast address */
err = ice_remove_vsi_mac_filter(vsi, broadcastaddr);
if (err)
return (EIO);
return (0);
}
/**
* ice_check_ctrlq_errors - Check for and report controlq errors
* @sc: device private structure
* @qname: name of the controlq
* @cq: the controlq to check
*
* Check and report controlq errors. Currently all we do is report them to the
* kernel message log, but we might want to improve this in the future, such
* as to keep track of statistics.
*/
static void
ice_check_ctrlq_errors(struct ice_softc *sc, const char *qname,
struct ice_ctl_q_info *cq)
{
struct ice_hw *hw = &sc->hw;
u32 val;
/* Check for error indications. Note that all the controlqs use the
* same register layout, so we use the PF_FW_AxQLEN defines only.
*/
val = rd32(hw, cq->rq.len);
if (val & (PF_FW_ARQLEN_ARQVFE_M | PF_FW_ARQLEN_ARQOVFL_M |
PF_FW_ARQLEN_ARQCRIT_M)) {
if (val & PF_FW_ARQLEN_ARQVFE_M)
device_printf(sc->dev,
"%s Receive Queue VF Error detected\n", qname);
if (val & PF_FW_ARQLEN_ARQOVFL_M)
device_printf(sc->dev,
"%s Receive Queue Overflow Error detected\n",
qname);
if (val & PF_FW_ARQLEN_ARQCRIT_M)
device_printf(sc->dev,
"%s Receive Queue Critical Error detected\n",
qname);
val &= ~(PF_FW_ARQLEN_ARQVFE_M | PF_FW_ARQLEN_ARQOVFL_M |
PF_FW_ARQLEN_ARQCRIT_M);
wr32(hw, cq->rq.len, val);
}
val = rd32(hw, cq->sq.len);
if (val & (PF_FW_ATQLEN_ATQVFE_M | PF_FW_ATQLEN_ATQOVFL_M |
PF_FW_ATQLEN_ATQCRIT_M)) {
if (val & PF_FW_ATQLEN_ATQVFE_M)
device_printf(sc->dev,
"%s Send Queue VF Error detected\n", qname);
if (val & PF_FW_ATQLEN_ATQOVFL_M)
device_printf(sc->dev,
"%s Send Queue Overflow Error detected\n",
qname);
if (val & PF_FW_ATQLEN_ATQCRIT_M)
device_printf(sc->dev,
"%s Send Queue Critical Error detected\n",
qname);
val &= ~(PF_FW_ATQLEN_ATQVFE_M | PF_FW_ATQLEN_ATQOVFL_M |
PF_FW_ATQLEN_ATQCRIT_M);
wr32(hw, cq->sq.len, val);
}
}
/**
* ice_process_link_event - Process a link event indication from firmware
* @sc: device softc structure
* @e: the received event data
*
* Gets the current link status from hardware, and may print a message if an
* unqualified is detected.
*/
static void
ice_process_link_event(struct ice_softc *sc,
struct ice_rq_event_info __invariant_only *e)
{
struct ice_port_info *pi = sc->hw.port_info;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
/* Sanity check that the data length matches */
MPASS(le16toh(e->desc.datalen) == sizeof(struct ice_aqc_get_link_status_data));
/*
* Even though the adapter gets link status information inside the
* event, it needs to send a Get Link Status AQ command in order
* to re-enable link events.
*/
pi->phy.get_link_info = true;
ice_get_link_status(pi, &sc->link_up);
if (pi->phy.link_info.topo_media_conflict &
(ICE_AQ_LINK_TOPO_CONFLICT | ICE_AQ_LINK_MEDIA_CONFLICT |
ICE_AQ_LINK_TOPO_CORRUPT))
device_printf(dev,
"Possible mis-configuration of the Ethernet port detected; please use the Intel (R) Ethernet Port Configuration Tool utility to address the issue.\n");
if ((pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) &&
!(pi->phy.link_info.link_info & ICE_AQ_LINK_UP) &&
!(pi->phy.link_info.an_info & ICE_AQ_QUALIFIED_MODULE))
device_printf(dev,
"Link is disabled on this device because an unsupported module type was detected! Refer to the Intel (R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
if (!(pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE)) {
if (!ice_testandset_state(&sc->state, ICE_STATE_NO_MEDIA)) {
status = ice_aq_set_link_restart_an(pi, false, NULL);
if (status != ICE_SUCCESS)
device_printf(dev,
"%s: ice_aq_set_link_restart_an: status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
}
/* ICE_STATE_NO_MEDIA is cleared when polling task detects media */
/* Indicate that link status must be reported again */
ice_clear_state(&sc->state, ICE_STATE_LINK_STATUS_REPORTED);
/* OS link info is updated elsewhere */
}
/**
* ice_process_ctrlq_event - Respond to a controlq event
* @sc: device private structure
* @qname: the name for this controlq
* @event: the event to process
*
* Perform actions in response to various controlq event notifications.
*/
static void
ice_process_ctrlq_event(struct ice_softc *sc, const char *qname,
struct ice_rq_event_info *event)
{
u16 opcode;
opcode = le16toh(event->desc.opcode);
switch (opcode) {
case ice_aqc_opc_get_link_status:
ice_process_link_event(sc, event);
break;
case ice_mbx_opc_send_msg_to_pf:
/* TODO: handle IOV event */
break;
case ice_aqc_opc_lldp_set_mib_change:
ice_handle_mib_change_event(sc, event);
break;
case ice_aqc_opc_event_lan_overflow:
ice_handle_lan_overflow_event(sc, event);
break;
default:
device_printf(sc->dev,
"%s Receive Queue unhandled event 0x%04x ignored\n",
qname, opcode);
}
}
/**
* ice_process_ctrlq - helper function to process controlq rings
* @sc: device private structure
* @q_type: specific control queue type
* @pending: return parameter to track remaining events
*
* Process controlq events for a given control queue type. Returns zero on
* success, and an error code on failure. If successful, pending is the number
* of remaining events left in the queue.
*/
int
ice_process_ctrlq(struct ice_softc *sc, enum ice_ctl_q q_type, u16 *pending)
{
struct ice_rq_event_info event = { { 0 } };
struct ice_hw *hw = &sc->hw;
struct ice_ctl_q_info *cq;
enum ice_status status;
const char *qname;
int loop = 0;
switch (q_type) {
case ICE_CTL_Q_ADMIN:
cq = &hw->adminq;
qname = "Admin";
break;
case ICE_CTL_Q_MAILBOX:
cq = &hw->mailboxq;
qname = "Mailbox";
break;
default:
device_printf(sc->dev,
"Unknown control queue type 0x%x\n",
q_type);
return 0;
}
ice_check_ctrlq_errors(sc, qname, cq);
/*
* Control queue processing happens during the admin task which may be
* holding a non-sleepable lock, so we *must* use M_NOWAIT here.
*/
event.buf_len = cq->rq_buf_size;
event.msg_buf = (u8 *)malloc(event.buf_len, M_ICE, M_ZERO | M_NOWAIT);
if (!event.msg_buf) {
device_printf(sc->dev,
"Unable to allocate memory for %s Receive Queue event\n",
qname);
return (ENOMEM);
}
do {
status = ice_clean_rq_elem(hw, cq, &event, pending);
if (status == ICE_ERR_AQ_NO_WORK)
break;
if (status) {
if (q_type == ICE_CTL_Q_ADMIN)
device_printf(sc->dev,
"%s Receive Queue event error %s aq_err %s\n",
qname, ice_status_str(status),
ice_aq_str(cq->rq_last_status));
else
device_printf(sc->dev,
"%s Receive Queue event error %s cq_err %d\n",
qname, ice_status_str(status), cq->rq_last_status);
free(event.msg_buf, M_ICE);
return (EIO);
}
/* XXX should we separate this handler by controlq type? */
ice_process_ctrlq_event(sc, qname, &event);
} while (*pending && (++loop < ICE_CTRLQ_WORK_LIMIT));
free(event.msg_buf, M_ICE);
return 0;
}
/**
* pkg_ver_empty - Check if a package version is empty
* @pkg_ver: the package version to check
* @pkg_name: the package name to check
*
* Checks if the package version structure is empty. We consider a package
* version as empty if none of the versions are non-zero and the name string
* is null as well.
*
* This is used to check if the package version was initialized by the driver,
* as we do not expect an actual DDP package file to have a zero'd version and
* name.
*
* @returns true if the package version is valid, or false otherwise.
*/
static bool
pkg_ver_empty(struct ice_pkg_ver *pkg_ver, u8 *pkg_name)
{
return (pkg_name[0] == '\0' &&
pkg_ver->major == 0 &&
pkg_ver->minor == 0 &&
pkg_ver->update == 0 &&
pkg_ver->draft == 0);
}
/**
* pkg_ver_compatible - Check if the package version is compatible
* @pkg_ver: the package version to check
*
* Compares the package version number to the driver's expected major/minor
* version. Returns an integer indicating whether the version is older, newer,
* or compatible with the driver.
*
* @returns 0 if the package version is compatible, -1 if the package version
* is older, and 1 if the package version is newer than the driver version.
*/
static int
pkg_ver_compatible(struct ice_pkg_ver *pkg_ver)
{
if (pkg_ver->major > ICE_PKG_SUPP_VER_MAJ)
return (1); /* newer */
else if ((pkg_ver->major == ICE_PKG_SUPP_VER_MAJ) &&
(pkg_ver->minor > ICE_PKG_SUPP_VER_MNR))
return (1); /* newer */
else if ((pkg_ver->major == ICE_PKG_SUPP_VER_MAJ) &&
(pkg_ver->minor == ICE_PKG_SUPP_VER_MNR))
return (0); /* compatible */
else
return (-1); /* older */
}
/**
* ice_os_pkg_version_str - Format OS package version info into a sbuf
* @hw: device hw structure
* @buf: string buffer to store name/version string
*
* Formats the name and version of the OS DDP package as found in the ice_ddp
* module into a string.
*
* @remark This will almost always be the same as the active package, but
* could be different in some cases. Use ice_active_pkg_version_str to get the
* version of the active DDP package.
*/
static void
ice_os_pkg_version_str(struct ice_hw *hw, struct sbuf *buf)
{
char name_buf[ICE_PKG_NAME_SIZE];
/* If the OS DDP package info is empty, use "None" */
if (pkg_ver_empty(&hw->pkg_ver, hw->pkg_name)) {
sbuf_printf(buf, "None");
return;
}
/*
* This should already be null-terminated, but since this is a raw
* value from an external source, strlcpy() into a new buffer to
* make sure.
*/
bzero(name_buf, sizeof(name_buf));
strlcpy(name_buf, (char *)hw->pkg_name, ICE_PKG_NAME_SIZE);
sbuf_printf(buf, "%s version %u.%u.%u.%u",
name_buf,
hw->pkg_ver.major,
hw->pkg_ver.minor,
hw->pkg_ver.update,
hw->pkg_ver.draft);
}
/**
* ice_active_pkg_version_str - Format active package version info into a sbuf
* @hw: device hw structure
* @buf: string buffer to store name/version string
*
* Formats the name and version of the active DDP package info into a string
* buffer for use.
*/
static void
ice_active_pkg_version_str(struct ice_hw *hw, struct sbuf *buf)
{
char name_buf[ICE_PKG_NAME_SIZE];
/* If the active DDP package info is empty, use "None" */
if (pkg_ver_empty(&hw->active_pkg_ver, hw->active_pkg_name)) {
sbuf_printf(buf, "None");
return;
}
/*
* This should already be null-terminated, but since this is a raw
* value from an external source, strlcpy() into a new buffer to
* make sure.
*/
bzero(name_buf, sizeof(name_buf));
strlcpy(name_buf, (char *)hw->active_pkg_name, ICE_PKG_NAME_SIZE);
sbuf_printf(buf, "%s version %u.%u.%u.%u",
name_buf,
hw->active_pkg_ver.major,
hw->active_pkg_ver.minor,
hw->active_pkg_ver.update,
hw->active_pkg_ver.draft);
if (hw->active_track_id != 0)
sbuf_printf(buf, ", track id 0x%08x", hw->active_track_id);
}
/**
* ice_nvm_version_str - Format the NVM version information into a sbuf
* @hw: device hw structure
* @buf: string buffer to store version string
*
* Formats the NVM information including firmware version, API version, NVM
* version, the EETRACK id, and OEM specific version information into a string
* buffer.
*/
static void
ice_nvm_version_str(struct ice_hw *hw, struct sbuf *buf)
{
struct ice_nvm_info *nvm = &hw->nvm;
struct ice_orom_info *orom = &nvm->orom;
struct ice_netlist_ver_info *netlist_ver = &hw->netlist_ver;
/* Note that the netlist versions are stored in packed Binary Coded
* Decimal format. The use of '%x' will correctly display these as
* decimal numbers. This works because every 4 bits will be displayed
* as a hexadecimal digit, and the BCD format will only use the values
* 0-9.
*/
sbuf_printf(buf,
"fw %u.%u.%u api %u.%u nvm %x.%02x etid %08x netlist %x.%x.%x-%x.%x.%x.%04x oem %u.%u.%u",
hw->fw_maj_ver, hw->fw_min_ver, hw->fw_patch,
hw->api_maj_ver, hw->api_min_ver,
nvm->major_ver, nvm->minor_ver, nvm->eetrack,
netlist_ver->major, netlist_ver->minor,
netlist_ver->type >> 16, netlist_ver->type & 0xFFFF,
netlist_ver->rev, netlist_ver->cust_ver, netlist_ver->hash,
orom->major, orom->build, orom->patch);
}
/**
* ice_print_nvm_version - Print the NVM info to the kernel message log
* @sc: the device softc structure
*
* Format and print an NVM version string using ice_nvm_version_str().
*/
void
ice_print_nvm_version(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
struct sbuf *sbuf;
sbuf = sbuf_new_auto();
ice_nvm_version_str(hw, sbuf);
sbuf_finish(sbuf);
device_printf(dev, "%s\n", sbuf_data(sbuf));
sbuf_delete(sbuf);
}
/**
* ice_update_vsi_hw_stats - Update VSI-specific ethernet statistics counters
* @vsi: the VSI to be updated
*
* Reads hardware stats and updates the ice_vsi_hw_stats tracking structure with
* the updated values.
*/
void
ice_update_vsi_hw_stats(struct ice_vsi *vsi)
{
struct ice_eth_stats *prev_es, *cur_es;
struct ice_hw *hw = &vsi->sc->hw;
u16 vsi_num;
if (!ice_is_vsi_valid(hw, vsi->idx))
return;
vsi_num = ice_get_hw_vsi_num(hw, vsi->idx); /* HW absolute index of a VSI */
prev_es = &vsi->hw_stats.prev;
cur_es = &vsi->hw_stats.cur;
#define ICE_VSI_STAT40(name, location) \
ice_stat_update40(hw, name ## L(vsi_num), \
vsi->hw_stats.offsets_loaded, \
&prev_es->location, &cur_es->location)
#define ICE_VSI_STAT32(name, location) \
ice_stat_update32(hw, name(vsi_num), \
vsi->hw_stats.offsets_loaded, \
&prev_es->location, &cur_es->location)
ICE_VSI_STAT40(GLV_GORC, rx_bytes);
ICE_VSI_STAT40(GLV_UPRC, rx_unicast);
ICE_VSI_STAT40(GLV_MPRC, rx_multicast);
ICE_VSI_STAT40(GLV_BPRC, rx_broadcast);
ICE_VSI_STAT32(GLV_RDPC, rx_discards);
ICE_VSI_STAT40(GLV_GOTC, tx_bytes);
ICE_VSI_STAT40(GLV_UPTC, tx_unicast);
ICE_VSI_STAT40(GLV_MPTC, tx_multicast);
ICE_VSI_STAT40(GLV_BPTC, tx_broadcast);
ICE_VSI_STAT32(GLV_TEPC, tx_errors);
ice_stat_update_repc(hw, vsi->idx, vsi->hw_stats.offsets_loaded,
cur_es);
#undef ICE_VSI_STAT40
#undef ICE_VSI_STAT32
vsi->hw_stats.offsets_loaded = true;
}
/**
* ice_reset_vsi_stats - Reset VSI statistics counters
* @vsi: VSI structure
*
* Resets the software tracking counters for the VSI statistics, and indicate
* that the offsets haven't been loaded. This is intended to be called
* post-reset so that VSI statistics count from zero again.
*/
void
ice_reset_vsi_stats(struct ice_vsi *vsi)
{
/* Reset HW stats */
memset(&vsi->hw_stats.prev, 0, sizeof(vsi->hw_stats.prev));
memset(&vsi->hw_stats.cur, 0, sizeof(vsi->hw_stats.cur));
vsi->hw_stats.offsets_loaded = false;
}
/**
* ice_update_pf_stats - Update port stats counters
* @sc: device private softc structure
*
* Reads hardware statistics registers and updates the software tracking
* structure with new values.
*/
void
ice_update_pf_stats(struct ice_softc *sc)
{
struct ice_hw_port_stats *prev_ps, *cur_ps;
struct ice_hw *hw = &sc->hw;
u8 lport;
MPASS(hw->port_info);
prev_ps = &sc->stats.prev;
cur_ps = &sc->stats.cur;
lport = hw->port_info->lport;
#define ICE_PF_STAT40(name, location) \
ice_stat_update40(hw, name ## L(lport), \
sc->stats.offsets_loaded, \
&prev_ps->location, &cur_ps->location)
#define ICE_PF_STAT32(name, location) \
ice_stat_update32(hw, name(lport), \
sc->stats.offsets_loaded, \
&prev_ps->location, &cur_ps->location)
ICE_PF_STAT40(GLPRT_GORC, eth.rx_bytes);
ICE_PF_STAT40(GLPRT_UPRC, eth.rx_unicast);
ICE_PF_STAT40(GLPRT_MPRC, eth.rx_multicast);
ICE_PF_STAT40(GLPRT_BPRC, eth.rx_broadcast);
ICE_PF_STAT40(GLPRT_GOTC, eth.tx_bytes);
ICE_PF_STAT40(GLPRT_UPTC, eth.tx_unicast);
ICE_PF_STAT40(GLPRT_MPTC, eth.tx_multicast);
ICE_PF_STAT40(GLPRT_BPTC, eth.tx_broadcast);
/* This stat register doesn't have an lport */
ice_stat_update32(hw, PRTRPB_RDPC,
sc->stats.offsets_loaded,
&prev_ps->eth.rx_discards, &cur_ps->eth.rx_discards);
ICE_PF_STAT32(GLPRT_TDOLD, tx_dropped_link_down);
ICE_PF_STAT40(GLPRT_PRC64, rx_size_64);
ICE_PF_STAT40(GLPRT_PRC127, rx_size_127);
ICE_PF_STAT40(GLPRT_PRC255, rx_size_255);
ICE_PF_STAT40(GLPRT_PRC511, rx_size_511);
ICE_PF_STAT40(GLPRT_PRC1023, rx_size_1023);
ICE_PF_STAT40(GLPRT_PRC1522, rx_size_1522);
ICE_PF_STAT40(GLPRT_PRC9522, rx_size_big);
ICE_PF_STAT40(GLPRT_PTC64, tx_size_64);
ICE_PF_STAT40(GLPRT_PTC127, tx_size_127);
ICE_PF_STAT40(GLPRT_PTC255, tx_size_255);
ICE_PF_STAT40(GLPRT_PTC511, tx_size_511);
ICE_PF_STAT40(GLPRT_PTC1023, tx_size_1023);
ICE_PF_STAT40(GLPRT_PTC1522, tx_size_1522);
ICE_PF_STAT40(GLPRT_PTC9522, tx_size_big);
ICE_PF_STAT32(GLPRT_LXONRXC, link_xon_rx);
ICE_PF_STAT32(GLPRT_LXOFFRXC, link_xoff_rx);
ICE_PF_STAT32(GLPRT_LXONTXC, link_xon_tx);
ICE_PF_STAT32(GLPRT_LXOFFTXC, link_xoff_tx);
ICE_PF_STAT32(GLPRT_CRCERRS, crc_errors);
ICE_PF_STAT32(GLPRT_ILLERRC, illegal_bytes);
ICE_PF_STAT32(GLPRT_MLFC, mac_local_faults);
ICE_PF_STAT32(GLPRT_MRFC, mac_remote_faults);
ICE_PF_STAT32(GLPRT_RLEC, rx_len_errors);
ICE_PF_STAT32(GLPRT_RUC, rx_undersize);
ICE_PF_STAT32(GLPRT_RFC, rx_fragments);
ICE_PF_STAT32(GLPRT_ROC, rx_oversize);
ICE_PF_STAT32(GLPRT_RJC, rx_jabber);
#undef ICE_PF_STAT40
#undef ICE_PF_STAT32
sc->stats.offsets_loaded = true;
}
/**
* ice_reset_pf_stats - Reset port stats counters
* @sc: Device private softc structure
*
* Reset software tracking values for statistics to zero, and indicate that
* offsets haven't been loaded. Intended to be called after a device reset so
* that statistics count from zero again.
*/
void
ice_reset_pf_stats(struct ice_softc *sc)
{
memset(&sc->stats.prev, 0, sizeof(sc->stats.prev));
memset(&sc->stats.cur, 0, sizeof(sc->stats.cur));
sc->stats.offsets_loaded = false;
}
/**
* ice_sysctl_show_fw - sysctl callback to show firmware information
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for the fw_version sysctl, to display the current firmware
* information found at hardware init time.
*/
static int
ice_sysctl_show_fw(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct sbuf *sbuf;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
ice_nvm_version_str(hw, sbuf);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_pba_number - sysctl callback to show PBA number
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for the pba_number sysctl, used to read the Product Board Assembly
* number for this device.
*/
static int
ice_sysctl_pba_number(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
u8 pba_string[32] = "";
enum ice_status status;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_read_pba_string(hw, pba_string, sizeof(pba_string));
if (status) {
device_printf(dev,
"%s: failed to read PBA string from NVM; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
return sysctl_handle_string(oidp, pba_string, sizeof(pba_string), req);
}
/**
* ice_sysctl_pkg_version - sysctl to show the active package version info
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for the pkg_version sysctl, to display the active DDP package name
* and version information.
*/
static int
ice_sysctl_pkg_version(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct sbuf *sbuf;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
ice_active_pkg_version_str(hw, sbuf);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_os_pkg_version - sysctl to show the OS package version info
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for the pkg_version sysctl, to display the OS DDP package name and
* version info found in the ice_ddp module.
*/
static int
ice_sysctl_os_pkg_version(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct sbuf *sbuf;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
ice_os_pkg_version_str(hw, sbuf);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_current_speed - sysctl callback to show current link speed
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for the current_speed sysctl, to display the string representing
* the current link speed.
*/
static int
ice_sysctl_current_speed(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct sbuf *sbuf;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 10, req);
sbuf_printf(sbuf, "%s", ice_aq_speed_to_str(hw->port_info));
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* @var phy_link_speeds
* @brief PHY link speed conversion array
*
* Array of link speeds to convert ICE_PHY_TYPE_LOW and ICE_PHY_TYPE_HIGH into
* link speeds used by the link speed sysctls.
*
* @remark these are based on the indices used in the BIT() macros for the
* ICE_PHY_TYPE_LOW_* and ICE_PHY_TYPE_HIGH_* definitions.
*/
static const uint16_t phy_link_speeds[] = {
ICE_AQ_LINK_SPEED_100MB,
ICE_AQ_LINK_SPEED_100MB,
ICE_AQ_LINK_SPEED_1000MB,
ICE_AQ_LINK_SPEED_1000MB,
ICE_AQ_LINK_SPEED_1000MB,
ICE_AQ_LINK_SPEED_1000MB,
ICE_AQ_LINK_SPEED_1000MB,
ICE_AQ_LINK_SPEED_2500MB,
ICE_AQ_LINK_SPEED_2500MB,
ICE_AQ_LINK_SPEED_2500MB,
ICE_AQ_LINK_SPEED_5GB,
ICE_AQ_LINK_SPEED_5GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_10GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_25GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_40GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_50GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
/* These rates are for ICE_PHY_TYPE_HIGH_* */
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB,
ICE_AQ_LINK_SPEED_100GB
};
#define ICE_SYSCTL_HELP_ADVERTISE_SPEED \
"\nControl advertised link speed." \
"\nFlags:" \
"\n\t 0x0 - Auto" \
"\n\t 0x1 - 10 Mb" \
"\n\t 0x2 - 100 Mb" \
"\n\t 0x4 - 1G" \
"\n\t 0x8 - 2.5G" \
"\n\t 0x10 - 5G" \
"\n\t 0x20 - 10G" \
"\n\t 0x40 - 20G" \
"\n\t 0x80 - 25G" \
"\n\t 0x100 - 40G" \
"\n\t 0x200 - 50G" \
"\n\t 0x400 - 100G" \
"\n\t0x8000 - Unknown" \
"\n\t" \
"\nUse \"sysctl -x\" to view flags properly."
#define ICE_PHYS_100MB \
(ICE_PHY_TYPE_LOW_100BASE_TX | \
ICE_PHY_TYPE_LOW_100M_SGMII)
#define ICE_PHYS_1000MB \
(ICE_PHY_TYPE_LOW_1000BASE_T | \
ICE_PHY_TYPE_LOW_1000BASE_SX | \
ICE_PHY_TYPE_LOW_1000BASE_LX | \
ICE_PHY_TYPE_LOW_1000BASE_KX | \
ICE_PHY_TYPE_LOW_1G_SGMII)
#define ICE_PHYS_2500MB \
(ICE_PHY_TYPE_LOW_2500BASE_T | \
ICE_PHY_TYPE_LOW_2500BASE_X | \
ICE_PHY_TYPE_LOW_2500BASE_KX)
#define ICE_PHYS_5GB \
(ICE_PHY_TYPE_LOW_5GBASE_T | \
ICE_PHY_TYPE_LOW_5GBASE_KR)
#define ICE_PHYS_10GB \
(ICE_PHY_TYPE_LOW_10GBASE_T | \
ICE_PHY_TYPE_LOW_10G_SFI_DA | \
ICE_PHY_TYPE_LOW_10GBASE_SR | \
ICE_PHY_TYPE_LOW_10GBASE_LR | \
ICE_PHY_TYPE_LOW_10GBASE_KR_CR1 | \
ICE_PHY_TYPE_LOW_10G_SFI_AOC_ACC | \
ICE_PHY_TYPE_LOW_10G_SFI_C2C)
#define ICE_PHYS_25GB \
(ICE_PHY_TYPE_LOW_25GBASE_T | \
ICE_PHY_TYPE_LOW_25GBASE_CR | \
ICE_PHY_TYPE_LOW_25GBASE_CR_S | \
ICE_PHY_TYPE_LOW_25GBASE_CR1 | \
ICE_PHY_TYPE_LOW_25GBASE_SR | \
ICE_PHY_TYPE_LOW_25GBASE_LR | \
ICE_PHY_TYPE_LOW_25GBASE_KR | \
ICE_PHY_TYPE_LOW_25GBASE_KR_S | \
ICE_PHY_TYPE_LOW_25GBASE_KR1 | \
ICE_PHY_TYPE_LOW_25G_AUI_AOC_ACC | \
ICE_PHY_TYPE_LOW_25G_AUI_C2C)
#define ICE_PHYS_40GB \
(ICE_PHY_TYPE_LOW_40GBASE_CR4 | \
ICE_PHY_TYPE_LOW_40GBASE_SR4 | \
ICE_PHY_TYPE_LOW_40GBASE_LR4 | \
ICE_PHY_TYPE_LOW_40GBASE_KR4 | \
ICE_PHY_TYPE_LOW_40G_XLAUI_AOC_ACC | \
ICE_PHY_TYPE_LOW_40G_XLAUI)
#define ICE_PHYS_50GB \
(ICE_PHY_TYPE_LOW_50GBASE_CR2 | \
ICE_PHY_TYPE_LOW_50GBASE_SR2 | \
ICE_PHY_TYPE_LOW_50GBASE_LR2 | \
ICE_PHY_TYPE_LOW_50GBASE_KR2 | \
ICE_PHY_TYPE_LOW_50G_LAUI2_AOC_ACC | \
ICE_PHY_TYPE_LOW_50G_LAUI2 | \
ICE_PHY_TYPE_LOW_50G_AUI2_AOC_ACC | \
ICE_PHY_TYPE_LOW_50G_AUI2 | \
ICE_PHY_TYPE_LOW_50GBASE_CP | \
ICE_PHY_TYPE_LOW_50GBASE_SR | \
ICE_PHY_TYPE_LOW_50GBASE_FR | \
ICE_PHY_TYPE_LOW_50GBASE_LR | \
ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4 | \
ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC | \
ICE_PHY_TYPE_LOW_50G_AUI1)
#define ICE_PHYS_100GB_LOW \
(ICE_PHY_TYPE_LOW_100GBASE_CR4 | \
ICE_PHY_TYPE_LOW_100GBASE_SR4 | \
ICE_PHY_TYPE_LOW_100GBASE_LR4 | \
ICE_PHY_TYPE_LOW_100GBASE_KR4 | \
ICE_PHY_TYPE_LOW_100G_CAUI4_AOC_ACC | \
ICE_PHY_TYPE_LOW_100G_CAUI4 | \
ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC | \
ICE_PHY_TYPE_LOW_100G_AUI4 | \
ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4 | \
ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4 | \
ICE_PHY_TYPE_LOW_100GBASE_CP2 | \
ICE_PHY_TYPE_LOW_100GBASE_SR2 | \
ICE_PHY_TYPE_LOW_100GBASE_DR)
#define ICE_PHYS_100GB_HIGH \
(ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4 | \
ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC | \
ICE_PHY_TYPE_HIGH_100G_CAUI2 | \
ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC | \
ICE_PHY_TYPE_HIGH_100G_AUI2)
/**
* ice_aq_phy_types_to_sysctl_speeds - Convert the PHY Types to speeds
* @phy_type_low: lower 64-bit PHY Type bitmask
* @phy_type_high: upper 64-bit PHY Type bitmask
*
* Convert the PHY Type fields from Get PHY Abilities and Set PHY Config into
* link speed flags. If phy_type_high has an unknown PHY type, then the return
* value will include the "ICE_AQ_LINK_SPEED_UNKNOWN" flag as well.
*/
static u16
ice_aq_phy_types_to_sysctl_speeds(u64 phy_type_low, u64 phy_type_high)
{
u16 sysctl_speeds = 0;
int bit;
/* coverity[address_of] */
for_each_set_bit(bit, &phy_type_low, 64)
sysctl_speeds |= phy_link_speeds[bit];
/* coverity[address_of] */
for_each_set_bit(bit, &phy_type_high, 64) {
if ((bit + 64) < (int)ARRAY_SIZE(phy_link_speeds))
sysctl_speeds |= phy_link_speeds[bit + 64];
else
sysctl_speeds |= ICE_AQ_LINK_SPEED_UNKNOWN;
}
return (sysctl_speeds);
}
/**
* ice_sysctl_speeds_to_aq_phy_types - Convert sysctl speed flags to AQ PHY flags
* @sysctl_speeds: 16-bit sysctl speeds or AQ_LINK_SPEED flags
* @phy_type_low: output parameter for lower AQ PHY flags
* @phy_type_high: output parameter for higher AQ PHY flags
*
* Converts the given link speed flags into AQ PHY type flag sets appropriate
* for use in a Set PHY Config command.
*/
static void
ice_sysctl_speeds_to_aq_phy_types(u16 sysctl_speeds, u64 *phy_type_low,
u64 *phy_type_high)
{
*phy_type_low = 0, *phy_type_high = 0;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_100MB)
*phy_type_low |= ICE_PHYS_100MB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_1000MB)
*phy_type_low |= ICE_PHYS_1000MB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_2500MB)
*phy_type_low |= ICE_PHYS_2500MB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_5GB)
*phy_type_low |= ICE_PHYS_5GB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_10GB)
*phy_type_low |= ICE_PHYS_10GB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_25GB)
*phy_type_low |= ICE_PHYS_25GB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_40GB)
*phy_type_low |= ICE_PHYS_40GB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_50GB)
*phy_type_low |= ICE_PHYS_50GB;
if (sysctl_speeds & ICE_AQ_LINK_SPEED_100GB) {
*phy_type_low |= ICE_PHYS_100GB_LOW;
*phy_type_high |= ICE_PHYS_100GB_HIGH;
}
}
/**
* ice_intersect_media_types_with_caps - Restrict input AQ PHY flags
* @sc: driver private structure
* @sysctl_speeds: current SW configuration of PHY types
* @phy_type_low: input/output flag set for low PHY types
* @phy_type_high: input/output flag set for high PHY types
*
* Intersects the input PHY flags with PHY flags retrieved from the adapter to
* ensure the flags are compatible.
*
* @returns 0 on success, EIO if an AQ command fails, or EINVAL if input PHY
* types have no intersection with TOPO_CAPS and the adapter is in non-lenient
* mode
*/
static int
ice_intersect_media_types_with_caps(struct ice_softc *sc, u16 sysctl_speeds,
u64 *phy_type_low, u64 *phy_type_high)
{
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_port_info *pi = sc->hw.port_info;
device_t dev = sc->dev;
enum ice_status status;
u64 temp_phy_low, temp_phy_high;
u64 final_phy_low, final_phy_high;
u16 topo_speeds;
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (TOPO_CAP) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(sc->hw.adminq.sq_last_status));
return (EIO);
}
final_phy_low = le64toh(pcaps.phy_type_low);
final_phy_high = le64toh(pcaps.phy_type_high);
topo_speeds = ice_aq_phy_types_to_sysctl_speeds(final_phy_low,
final_phy_high);
/*
* If the user specifies a subset of speeds the media is already
* capable of supporting, then we're good to go.
*/
if ((sysctl_speeds & topo_speeds) == sysctl_speeds)
goto intersect_final;
temp_phy_low = final_phy_low;
temp_phy_high = final_phy_high;
/*
* Otherwise, we'll have to use the superset if Lenient Mode is
* supported.
*/
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_LENIENT_LINK_MODE)) {
/*
* Start with masks that _don't_ include the PHY types
* discovered by the TOPO_CAP.
*/
ice_sysctl_speeds_to_aq_phy_types(topo_speeds, &final_phy_low,
&final_phy_high);
final_phy_low = ~final_phy_low;
final_phy_high = ~final_phy_high;
/* Get the PHY types the NVM says we can support */
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_NVM_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (NVM_CAP) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(sc->hw.adminq.sq_last_status));
return (status);
}
/*
* Clear out the unsupported PHY types, including those
* from TOPO_CAP.
*/
final_phy_low &= le64toh(pcaps.phy_type_low);
final_phy_high &= le64toh(pcaps.phy_type_high);
/*
* Include PHY types from TOPO_CAP (which may be a subset
* of the types the NVM specifies).
*/
final_phy_low |= temp_phy_low;
final_phy_high |= temp_phy_high;
}
intersect_final:
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_LENIENT_LINK_MODE))
ice_apply_supported_speed_filter(&final_phy_low, &final_phy_high);
ice_sysctl_speeds_to_aq_phy_types(sysctl_speeds, &temp_phy_low,
&temp_phy_high);
final_phy_low &= temp_phy_low;
final_phy_high &= temp_phy_high;
if (final_phy_low == 0 && final_phy_high == 0) {
device_printf(dev,
"The selected speed is not supported by the current media. Please select a link speed that is supported by the current media.\n");
return (EINVAL);
}
/* Overwrite input phy_type values and return */
*phy_type_low = final_phy_low;
*phy_type_high = final_phy_high;
return (0);
}
/**
* ice_get_auto_speeds - Get PHY type flags for "auto" speed
* @sc: driver private structure
* @phy_type_low: output low PHY type flags
* @phy_type_high: output high PHY type flags
*
* Retrieves a suitable set of PHY type flags to use for an "auto" speed
* setting by either using the NVM default overrides for speed, or retrieving
* a default from the adapter using Get PHY capabilities in TOPO_CAPS mode.
*
* @returns 0 on success or EIO on AQ command failure
*/
static int
ice_get_auto_speeds(struct ice_softc *sc, u64 *phy_type_low,
u64 *phy_type_high)
{
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_hw *hw = &sc->hw;
struct ice_port_info *pi = hw->port_info;
device_t dev = sc->dev;
enum ice_status status;
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_DEFAULT_OVERRIDE)) {
/* copy over speed settings from LDO TLV */
*phy_type_low = CPU_TO_LE64(sc->ldo_tlv.phy_type_low);
*phy_type_high = CPU_TO_LE64(sc->ldo_tlv.phy_type_high);
} else {
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (TOPO_CAP) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
*phy_type_low = le64toh(pcaps.phy_type_low);
*phy_type_high = le64toh(pcaps.phy_type_high);
}
return (0);
}
/**
* ice_sysctl_advertise_speed - Display/change link speeds supported by port
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the currently supported speeds
* On write: Sets the device's supported speeds
* Valid input flags: see ICE_SYSCTL_HELP_ADVERTISE_SPEED
*/
static int
ice_sysctl_advertise_speed(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_aqc_set_phy_cfg_data cfg = { 0 };
struct ice_hw *hw = &sc->hw;
struct ice_port_info *pi = hw->port_info;
device_t dev = sc->dev;
enum ice_status status;
u64 phy_low, phy_high;
u16 sysctl_speeds = 0;
int error = 0;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Get the current speeds from the adapter's "active" configuration. */
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (SW_CFG) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
phy_low = le64toh(pcaps.phy_type_low);
phy_high = le64toh(pcaps.phy_type_high);
sysctl_speeds = ice_aq_phy_types_to_sysctl_speeds(phy_low, phy_high);
error = sysctl_handle_16(oidp, &sysctl_speeds, 0, req);
if ((error) || (req->newptr == NULL))
return (error);
if (sysctl_speeds > 0x7FF) {
device_printf(dev,
"%s: \"%u\" is outside of the range of acceptable values.\n",
__func__, sysctl_speeds);
return (EINVAL);
}
/* 0 is treated as "Auto"; the driver will handle selecting the correct speeds,
* or apply an override if one is specified in the NVM.
*/
if (sysctl_speeds == 0) {
error = ice_get_auto_speeds(sc, &phy_low, &phy_high);
if (error)
/* Function already prints appropriate error message */
return (error);
} else {
error = ice_intersect_media_types_with_caps(sc, sysctl_speeds,
&phy_low, &phy_high);
if (error)
/* Function already prints appropriate error message */
return (error);
}
sysctl_speeds = ice_aq_phy_types_to_sysctl_speeds(phy_low, phy_high);
/* Cache new user setting for speeds */
pi->phy.curr_user_speed_req = sysctl_speeds;
/* Setup new PHY config with new input PHY types */
ice_copy_phy_caps_to_cfg(pi, &pcaps, &cfg);
cfg.phy_type_low = phy_low;
cfg.phy_type_high = phy_high;
cfg.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT | ICE_AQ_PHY_ENA_LINK;
status = ice_aq_set_phy_cfg(hw, pi, &cfg, NULL);
if (status != ICE_SUCCESS) {
/* Don't indicate failure if there's no media in the port -- the sysctl
* handler has saved the value and will apply it when media is inserted.
*/
if (status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY) {
device_printf(dev,
"%s: Setting will be applied when media is inserted\n", __func__);
return (0);
} else {
device_printf(dev,
"%s: ice_aq_set_phy_cfg failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
}
return (0);
}
#define ICE_SYSCTL_HELP_FEC_CONFIG \
"\nDisplay or set the port's requested FEC mode." \
"\n\tauto - " ICE_FEC_STRING_AUTO \
"\n\tfc - " ICE_FEC_STRING_BASER \
"\n\trs - " ICE_FEC_STRING_RS \
"\n\tnone - " ICE_FEC_STRING_NONE \
"\nEither of the left or right strings above can be used to set the requested mode."
/**
* ice_sysctl_fec_config - Display/change the configured FEC mode
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the configured FEC mode
* On write: Sets the device's FEC mode to the input string, if it's valid.
* Valid input strings: see ICE_SYSCTL_HELP_FEC_CONFIG
*/
static int
ice_sysctl_fec_config(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_port_info *pi = sc->hw.port_info;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_aqc_set_phy_cfg_data cfg = { 0 };
struct ice_hw *hw = &sc->hw;
enum ice_fec_mode new_mode;
enum ice_status status;
device_t dev = sc->dev;
char req_fec[32];
int error = 0;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
bzero(req_fec, sizeof(req_fec));
strlcpy(req_fec, ice_requested_fec_mode(pi), sizeof(req_fec));
error = sysctl_handle_string(oidp, req_fec, sizeof(req_fec), req);
if ((error) || (req->newptr == NULL))
return (error);
if (strcmp(req_fec, "auto") == 0 ||
strcmp(req_fec, ice_fec_str(ICE_FEC_AUTO)) == 0) {
new_mode = ICE_FEC_AUTO;
} else if (strcmp(req_fec, "fc") == 0 ||
strcmp(req_fec, ice_fec_str(ICE_FEC_BASER)) == 0) {
new_mode = ICE_FEC_BASER;
} else if (strcmp(req_fec, "rs") == 0 ||
strcmp(req_fec, ice_fec_str(ICE_FEC_RS)) == 0) {
new_mode = ICE_FEC_RS;
} else if (strcmp(req_fec, "none") == 0 ||
strcmp(req_fec, ice_fec_str(ICE_FEC_NONE)) == 0) {
new_mode = ICE_FEC_NONE;
} else {
device_printf(dev,
"%s: \"%s\" is not a valid FEC mode\n",
__func__, req_fec);
return (EINVAL);
}
/* Cache user FEC mode for later link ups */
pi->phy.curr_user_fec_req = new_mode;
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps failed (SW_CFG); status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
ice_copy_phy_caps_to_cfg(pi, &pcaps, &cfg);
/* Get link_fec_opt/AUTO_FEC mode from TOPO caps for base for new FEC mode */
memset(&pcaps, 0, sizeof(pcaps));
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps failed (TOPO_CAP); status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
/* Configure new FEC options using TOPO caps */
cfg.link_fec_opt = pcaps.link_fec_options;
cfg.caps &= ~ICE_AQ_PHY_ENA_AUTO_FEC;
if (pcaps.caps & ICE_AQC_PHY_EN_AUTO_FEC)
cfg.caps |= ICE_AQ_PHY_ENA_AUTO_FEC;
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_DEFAULT_OVERRIDE) &&
new_mode == ICE_FEC_AUTO) {
/* copy over FEC settings from LDO TLV */
cfg.link_fec_opt = sc->ldo_tlv.fec_options;
} else {
ice_cfg_phy_fec(pi, &cfg, new_mode);
/* Check if the new mode is valid, and exit with an error if not */
if (cfg.link_fec_opt &&
!(cfg.link_fec_opt & pcaps.link_fec_options)) {
device_printf(dev,
"%s: The requested FEC mode, %s, is not supported by current media\n",
__func__, ice_fec_str(new_mode));
return (ENOTSUP);
}
}
cfg.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT;
status = ice_aq_set_phy_cfg(hw, pi, &cfg, NULL);
if (status != ICE_SUCCESS) {
/* Don't indicate failure if there's no media in the port -- the sysctl
* handler has saved the value and will apply it when media is inserted.
*/
if (status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY) {
device_printf(dev,
"%s: Setting will be applied when media is inserted\n", __func__);
return (0);
} else {
device_printf(dev,
"%s: ice_aq_set_phy_cfg failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
}
return (0);
}
/**
* ice_sysctl_negotiated_fec - Display the negotiated FEC mode on the link
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the negotiated FEC mode, in a string
*/
static int
ice_sysctl_negotiated_fec(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
char neg_fec[32];
int error;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Copy const string into a buffer to drop const qualifier */
bzero(neg_fec, sizeof(neg_fec));
strlcpy(neg_fec, ice_negotiated_fec_mode(hw->port_info), sizeof(neg_fec));
error = sysctl_handle_string(oidp, neg_fec, 0, req);
if (req->newptr != NULL)
return (EPERM);
return (error);
}
#define ICE_SYSCTL_HELP_FC_CONFIG \
"\nDisplay or set the port's advertised flow control mode.\n" \
"\t0 - " ICE_FC_STRING_NONE \
"\n\t1 - " ICE_FC_STRING_RX \
"\n\t2 - " ICE_FC_STRING_TX \
"\n\t3 - " ICE_FC_STRING_FULL \
"\nEither the numbers or the strings above can be used to set the advertised mode."
/**
* ice_sysctl_fc_config - Display/change the advertised flow control mode
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the configured flow control mode
* On write: Sets the device's flow control mode to the input, if it's valid.
* Valid input strings: see ICE_SYSCTL_HELP_FC_CONFIG
*/
static int
ice_sysctl_fc_config(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_port_info *pi = sc->hw.port_info;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
enum ice_fc_mode old_mode, new_mode;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int error = 0, fc_num;
bool mode_set = false;
struct sbuf buf;
char *fc_str_end;
char fc_str[32];
u8 aq_failures;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
/* Convert HW response format to SW enum value */
if ((pcaps.caps & ICE_AQC_PHY_EN_TX_LINK_PAUSE) &&
(pcaps.caps & ICE_AQC_PHY_EN_RX_LINK_PAUSE))
old_mode = ICE_FC_FULL;
else if (pcaps.caps & ICE_AQC_PHY_EN_TX_LINK_PAUSE)
old_mode = ICE_FC_TX_PAUSE;
else if (pcaps.caps & ICE_AQC_PHY_EN_RX_LINK_PAUSE)
old_mode = ICE_FC_RX_PAUSE;
else
old_mode = ICE_FC_NONE;
/* Create "old" string for output */
bzero(fc_str, sizeof(fc_str));
sbuf_new_for_sysctl(&buf, fc_str, sizeof(fc_str), req);
sbuf_printf(&buf, "%d<%s>", old_mode, ice_fc_str(old_mode));
sbuf_finish(&buf);
sbuf_delete(&buf);
error = sysctl_handle_string(oidp, fc_str, sizeof(fc_str), req);
if ((error) || (req->newptr == NULL))
return (error);
/* Try to parse input as a string, first */
if (strcasecmp(ice_fc_str(ICE_FC_FULL), fc_str) == 0) {
new_mode = ICE_FC_FULL;
mode_set = true;
}
else if (strcasecmp(ice_fc_str(ICE_FC_TX_PAUSE), fc_str) == 0) {
new_mode = ICE_FC_TX_PAUSE;
mode_set = true;
}
else if (strcasecmp(ice_fc_str(ICE_FC_RX_PAUSE), fc_str) == 0) {
new_mode = ICE_FC_RX_PAUSE;
mode_set = true;
}
else if (strcasecmp(ice_fc_str(ICE_FC_NONE), fc_str) == 0) {
new_mode = ICE_FC_NONE;
mode_set = true;
}
/*
* Then check if it's an integer, for compatibility with the method
* used in older drivers.
*/
if (!mode_set) {
fc_num = strtol(fc_str, &fc_str_end, 0);
if (fc_str_end == fc_str)
fc_num = -1;
switch (fc_num) {
case 3:
new_mode = ICE_FC_FULL;
break;
case 2:
new_mode = ICE_FC_TX_PAUSE;
break;
case 1:
new_mode = ICE_FC_RX_PAUSE;
break;
case 0:
new_mode = ICE_FC_NONE;
break;
default:
device_printf(dev,
"%s: \"%s\" is not a valid flow control mode\n",
__func__, fc_str);
return (EINVAL);
}
}
/* Finally, set the flow control mode in FW */
hw->port_info->fc.req_mode = new_mode;
status = ice_set_fc(pi, &aq_failures, true);
if (status != ICE_SUCCESS) {
/* Don't indicate failure if there's no media in the port -- the sysctl
* handler has saved the value and will apply it when media is inserted.
*/
if (aq_failures == ICE_SET_FC_AQ_FAIL_SET &&
hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY) {
device_printf(dev,
"%s: Setting will be applied when media is inserted\n", __func__);
return (0);
} else {
device_printf(dev,
"%s: ice_set_fc AQ failure = %d\n", __func__, aq_failures);
return (EIO);
}
}
return (0);
}
/**
* ice_sysctl_negotiated_fc - Display currently negotiated FC mode
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the currently negotiated flow control settings.
*
* If link is not established, this will report ICE_FC_NONE, as no flow
* control is negotiated while link is down.
*/
static int
ice_sysctl_negotiated_fc(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_port_info *pi = sc->hw.port_info;
const char *negotiated_fc;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
negotiated_fc = ice_flowcontrol_mode(pi);
return sysctl_handle_string(oidp, __DECONST(char *, negotiated_fc), 0, req);
}
/**
* __ice_sysctl_phy_type_handler - Display/change supported PHY types/speeds
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
* @is_phy_type_high: if true, handle the high PHY type instead of the low PHY type
*
* Private handler for phy_type_high and phy_type_low sysctls.
*/
static int
__ice_sysctl_phy_type_handler(SYSCTL_HANDLER_ARGS, bool is_phy_type_high)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_aqc_set_phy_cfg_data cfg = { 0 };
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
uint64_t types;
int error = 0;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_aq_get_phy_caps(hw->port_info, false, ICE_AQC_REPORT_SW_CFG,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
if (is_phy_type_high)
types = pcaps.phy_type_high;
else
types = pcaps.phy_type_low;
error = sysctl_handle_64(oidp, &types, sizeof(types), req);
if ((error) || (req->newptr == NULL))
return (error);
ice_copy_phy_caps_to_cfg(hw->port_info, &pcaps, &cfg);
if (is_phy_type_high)
cfg.phy_type_high = types & hw->port_info->phy.phy_type_high;
else
cfg.phy_type_low = types & hw->port_info->phy.phy_type_low;
cfg.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT;
status = ice_aq_set_phy_cfg(hw, hw->port_info, &cfg, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_set_phy_cfg failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
return (0);
}
/**
* ice_sysctl_phy_type_low - Display/change supported lower PHY types/speeds
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the currently supported lower PHY types
* On write: Sets the device's supported low PHY types
*/
static int
ice_sysctl_phy_type_low(SYSCTL_HANDLER_ARGS)
{
return __ice_sysctl_phy_type_handler(oidp, arg1, arg2, req, false);
}
/**
* ice_sysctl_phy_type_high - Display/change supported higher PHY types/speeds
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the currently supported higher PHY types
* On write: Sets the device's supported high PHY types
*/
static int
ice_sysctl_phy_type_high(SYSCTL_HANDLER_ARGS)
{
return __ice_sysctl_phy_type_handler(oidp, arg1, arg2, req, true);
}
/**
* ice_sysctl_phy_caps - Display response from Get PHY abililties
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
* @report_mode: the mode to report
*
* On read: Display the response from Get PHY abillities with the given report
* mode.
*/
static int
ice_sysctl_phy_caps(SYSCTL_HANDLER_ARGS, u8 report_mode)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_hw *hw = &sc->hw;
struct ice_port_info *pi = hw->port_info;
device_t dev = sc->dev;
enum ice_status status;
int error;
UNREFERENCED_PARAMETER(arg2);
error = priv_check(curthread, PRIV_DRIVER);
if (error)
return (error);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_aq_get_phy_caps(pi, true, report_mode, &pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
error = sysctl_handle_opaque(oidp, &pcaps, sizeof(pcaps), req);
if (req->newptr != NULL)
return (EPERM);
return (error);
}
/**
* ice_sysctl_phy_sw_caps - Display response from Get PHY abililties
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Display the response from Get PHY abillities reporting the last
* software configuration.
*/
static int
ice_sysctl_phy_sw_caps(SYSCTL_HANDLER_ARGS)
{
return ice_sysctl_phy_caps(oidp, arg1, arg2, req,
ICE_AQC_REPORT_SW_CFG);
}
/**
* ice_sysctl_phy_nvm_caps - Display response from Get PHY abililties
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Display the response from Get PHY abillities reporting the NVM
* configuration.
*/
static int
ice_sysctl_phy_nvm_caps(SYSCTL_HANDLER_ARGS)
{
return ice_sysctl_phy_caps(oidp, arg1, arg2, req,
ICE_AQC_REPORT_NVM_CAP);
}
/**
* ice_sysctl_phy_topo_caps - Display response from Get PHY abililties
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Display the response from Get PHY abillities reporting the
* topology configuration.
*/
static int
ice_sysctl_phy_topo_caps(SYSCTL_HANDLER_ARGS)
{
return ice_sysctl_phy_caps(oidp, arg1, arg2, req,
ICE_AQC_REPORT_TOPO_CAP);
}
/**
* ice_sysctl_phy_link_status - Display response from Get Link Status
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Display the response from firmware for the Get Link Status
* request.
*/
static int
ice_sysctl_phy_link_status(SYSCTL_HANDLER_ARGS)
{
struct ice_aqc_get_link_status_data link_data = { 0 };
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct ice_port_info *pi = hw->port_info;
struct ice_aqc_get_link_status *resp;
struct ice_aq_desc desc;
device_t dev = sc->dev;
enum ice_status status;
int error;
UNREFERENCED_PARAMETER(arg2);
/*
* Ensure that only contexts with driver privilege are allowed to
* access this information
*/
error = priv_check(curthread, PRIV_DRIVER);
if (error)
return (error);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_link_status);
resp = &desc.params.get_link_status;
resp->lport_num = pi->lport;
status = ice_aq_send_cmd(hw, &desc, &link_data, sizeof(link_data), NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_send_cmd failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
error = sysctl_handle_opaque(oidp, &link_data, sizeof(link_data), req);
if (req->newptr != NULL)
return (EPERM);
return (error);
}
/**
* ice_sysctl_fw_cur_lldp_persist_status - Display current FW LLDP status
* @oidp: sysctl oid structure
* @arg1: pointer to private softc structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays current persistent LLDP status.
*/
static int
ice_sysctl_fw_cur_lldp_persist_status(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
struct sbuf *sbuf;
u32 lldp_state;
UNREFERENCED_PARAMETER(arg2);
UNREFERENCED_PARAMETER(oidp);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_get_cur_lldp_persist_status(hw, &lldp_state);
if (status) {
device_printf(dev,
"Could not acquire current LLDP persistence status, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
sbuf_printf(sbuf, "%s", ice_fw_lldp_status(lldp_state));
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_fw_dflt_lldp_persist_status - Display default FW LLDP status
* @oidp: sysctl oid structure
* @arg1: pointer to private softc structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays default persistent LLDP status.
*/
static int
ice_sysctl_fw_dflt_lldp_persist_status(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
struct sbuf *sbuf;
u32 lldp_state;
UNREFERENCED_PARAMETER(arg2);
UNREFERENCED_PARAMETER(oidp);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_get_dflt_lldp_persist_status(hw, &lldp_state);
if (status) {
device_printf(dev,
"Could not acquire default LLDP persistence status, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
sbuf_printf(sbuf, "%s", ice_fw_lldp_status(lldp_state));
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
#define ICE_SYSCTL_HELP_FW_LLDP_AGENT \
"\nDisplay or change FW LLDP agent state:" \
"\n\t0 - disabled" \
"\n\t1 - enabled"
/**
* ice_sysctl_fw_lldp_agent - Display or change the FW LLDP agent status
* @oidp: sysctl oid structure
* @arg1: pointer to private softc structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays whether the FW LLDP agent is running
* On write: Persistently enables or disables the FW LLDP agent
*/
static int
ice_sysctl_fw_lldp_agent(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int error = 0;
u32 old_state;
u8 fw_lldp_enabled;
bool retried_start_lldp = false;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
status = ice_get_cur_lldp_persist_status(hw, &old_state);
if (status) {
device_printf(dev,
"Could not acquire current LLDP persistence status, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
if (old_state > ICE_LLDP_ADMINSTATUS_ENA_RXTX) {
status = ice_get_dflt_lldp_persist_status(hw, &old_state);
if (status) {
device_printf(dev,
"Could not acquire default LLDP persistence status, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
}
if (old_state == 0)
fw_lldp_enabled = false;
else
fw_lldp_enabled = true;
error = sysctl_handle_bool(oidp, &fw_lldp_enabled, 0, req);
if ((error) || (req->newptr == NULL))
return (error);
if (old_state == 0 && fw_lldp_enabled == false)
return (0);
if (old_state != 0 && fw_lldp_enabled == true)
return (0);
if (fw_lldp_enabled == false) {
status = ice_aq_stop_lldp(hw, true, true, NULL);
/* EPERM is returned if the LLDP agent is already shutdown */
if (status && hw->adminq.sq_last_status != ICE_AQ_RC_EPERM) {
device_printf(dev,
"%s: ice_aq_stop_lldp failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
ice_aq_set_dcb_parameters(hw, true, NULL);
hw->port_info->qos_cfg.is_sw_lldp = true;
ice_add_rx_lldp_filter(sc);
} else {
ice_del_rx_lldp_filter(sc);
retry_start_lldp:
status = ice_aq_start_lldp(hw, true, NULL);
if (status) {
switch (hw->adminq.sq_last_status) {
/* EEXIST is returned if the LLDP agent is already started */
case ICE_AQ_RC_EEXIST:
break;
case ICE_AQ_RC_EAGAIN:
/* Retry command after a 2 second wait */
if (retried_start_lldp == false) {
retried_start_lldp = true;
pause("slldp", ICE_START_LLDP_RETRY_WAIT);
goto retry_start_lldp;
}
/* Fallthrough */
default:
device_printf(dev,
"%s: ice_aq_start_lldp failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
}
hw->port_info->qos_cfg.is_sw_lldp = false;
}
return (error);
}
/**
* ice_add_device_sysctls - add device specific dynamic sysctls
* @sc: device private structure
*
* Add per-device dynamic sysctls which show device configuration or enable
* configuring device functionality. For tunable values which can be set prior
* to load, see ice_add_device_tunables.
*
* This function depends on the sysctl layout setup by ice_add_device_tunables,
* and likely should be called near the end of the attach process.
*/
void
ice_add_device_sysctls(struct ice_softc *sc)
{
struct sysctl_oid *hw_node;
device_t dev = sc->dev;
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
struct sysctl_oid_list *ctx_list =
SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "fw_version", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_show_fw, "A", "Firmware version");
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "pba_number", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_pba_number, "A", "Product Board Assembly Number");
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "ddp_version", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_pkg_version, "A", "Active DDP package name and version");
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "current_speed", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_current_speed, "A", "Current Port Link Speed");
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "requested_fec", CTLTYPE_STRING | CTLFLAG_RW,
sc, 0, ice_sysctl_fec_config, "A", ICE_SYSCTL_HELP_FEC_CONFIG);
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "negotiated_fec", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_negotiated_fec, "A", "Current Negotiated FEC mode");
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "fc", CTLTYPE_STRING | CTLFLAG_RW,
sc, 0, ice_sysctl_fc_config, "A", ICE_SYSCTL_HELP_FC_CONFIG);
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "advertise_speed", CTLTYPE_U16 | CTLFLAG_RW,
sc, 0, ice_sysctl_advertise_speed, "SU", ICE_SYSCTL_HELP_ADVERTISE_SPEED);
SYSCTL_ADD_PROC(ctx, ctx_list,
OID_AUTO, "fw_lldp_agent", CTLTYPE_U8 | CTLFLAG_RWTUN,
sc, 0, ice_sysctl_fw_lldp_agent, "CU", ICE_SYSCTL_HELP_FW_LLDP_AGENT);
/* Differentiate software and hardware statistics, by keeping hw stats
* in their own node. This isn't in ice_add_device_tunables, because
* we won't have any CTLFLAG_TUN sysctls under this node.
*/
hw_node = SYSCTL_ADD_NODE(ctx, ctx_list, OID_AUTO, "hw", CTLFLAG_RD,
NULL, "Port Hardware Statistics");
ice_add_sysctls_mac_stats(ctx, hw_node, &sc->stats.cur);
/* Add the main PF VSI stats now. Other VSIs will add their own stats
* during creation
*/
ice_add_vsi_sysctls(&sc->pf_vsi);
/* Add sysctls related to debugging the device driver. This includes
* sysctls which display additional internal driver state for use in
* understanding what is happening within the driver.
*/
ice_add_debug_sysctls(sc);
}
/**
* @enum hmc_error_type
* @brief enumeration of HMC errors
*
* Enumeration defining the possible HMC errors that might occur.
*/
enum hmc_error_type {
HMC_ERR_PMF_INVALID = 0,
HMC_ERR_VF_IDX_INVALID = 1,
HMC_ERR_VF_PARENT_PF_INVALID = 2,
/* 3 is reserved */
HMC_ERR_INDEX_TOO_BIG = 4,
HMC_ERR_ADDRESS_TOO_LARGE = 5,
HMC_ERR_SEGMENT_DESC_INVALID = 6,
HMC_ERR_SEGMENT_DESC_TOO_SMALL = 7,
HMC_ERR_PAGE_DESC_INVALID = 8,
HMC_ERR_UNSUPPORTED_REQUEST_COMPLETION = 9,
/* 10 is reserved */
HMC_ERR_INVALID_OBJECT_TYPE = 11,
/* 12 is reserved */
};
/**
* ice_log_hmc_error - Log an HMC error message
* @hw: device hw structure
* @dev: the device to pass to device_printf()
*
* Log a message when an HMC error interrupt is triggered.
*/
void
ice_log_hmc_error(struct ice_hw *hw, device_t dev)
{
u32 info, data;
u8 index, errtype, objtype;
bool isvf;
info = rd32(hw, PFHMC_ERRORINFO);
data = rd32(hw, PFHMC_ERRORDATA);
index = (u8)(info & PFHMC_ERRORINFO_PMF_INDEX_M);
errtype = (u8)((info & PFHMC_ERRORINFO_HMC_ERROR_TYPE_M) >>
PFHMC_ERRORINFO_HMC_ERROR_TYPE_S);
objtype = (u8)((info & PFHMC_ERRORINFO_HMC_OBJECT_TYPE_M) >>
PFHMC_ERRORINFO_HMC_OBJECT_TYPE_S);
isvf = info & PFHMC_ERRORINFO_PMF_ISVF_M;
device_printf(dev, "%s HMC Error detected on PMF index %d:\n",
isvf ? "VF" : "PF", index);
device_printf(dev, "error type %d, object type %d, data 0x%08x\n",
errtype, objtype, data);
switch (errtype) {
case HMC_ERR_PMF_INVALID:
device_printf(dev, "Private Memory Function is not valid\n");
break;
case HMC_ERR_VF_IDX_INVALID:
device_printf(dev, "Invalid Private Memory Function index for PE enabled VF\n");
break;
case HMC_ERR_VF_PARENT_PF_INVALID:
device_printf(dev, "Invalid parent PF for PE enabled VF\n");
break;
case HMC_ERR_INDEX_TOO_BIG:
device_printf(dev, "Object index too big\n");
break;
case HMC_ERR_ADDRESS_TOO_LARGE:
device_printf(dev, "Address extends beyond segment descriptor limit\n");
break;
case HMC_ERR_SEGMENT_DESC_INVALID:
device_printf(dev, "Segment descriptor is invalid\n");
break;
case HMC_ERR_SEGMENT_DESC_TOO_SMALL:
device_printf(dev, "Segment descriptor is too small\n");
break;
case HMC_ERR_PAGE_DESC_INVALID:
device_printf(dev, "Page descriptor is invalid\n");
break;
case HMC_ERR_UNSUPPORTED_REQUEST_COMPLETION:
device_printf(dev, "Unsupported Request completion received from PCIe\n");
break;
case HMC_ERR_INVALID_OBJECT_TYPE:
device_printf(dev, "Invalid object type\n");
break;
default:
device_printf(dev, "Unknown HMC error\n");
}
/* Clear the error indication */
wr32(hw, PFHMC_ERRORINFO, 0);
}
/**
* @struct ice_sysctl_info
* @brief sysctl information
*
* Structure used to simplify the process of defining the many similar
* statistics sysctls.
*/
struct ice_sysctl_info {
u64 *stat;
const char *name;
const char *description;
};
/**
* ice_add_sysctls_eth_stats - Add sysctls for ethernet statistics
* @ctx: sysctl ctx to use
* @parent: the parent node to add sysctls under
* @stats: the ethernet stats structure to source values from
*
* Adds statistics sysctls for the ethernet statistics of the MAC or a VSI.
* Will add them under the parent node specified.
*
* Note that tx_errors is only meaningful for VSIs and not the global MAC/PF
* statistics, so it is not included here. Similarly, rx_discards has different
* descriptions for VSIs and MAC/PF stats, so it is also not included here.
*/
void
ice_add_sysctls_eth_stats(struct sysctl_ctx_list *ctx,
struct sysctl_oid *parent,
struct ice_eth_stats *stats)
{
const struct ice_sysctl_info ctls[] = {
/* Rx Stats */
{ &stats->rx_bytes, "good_octets_rcvd", "Good Octets Received" },
{ &stats->rx_unicast, "ucast_pkts_rcvd", "Unicast Packets Received" },
{ &stats->rx_multicast, "mcast_pkts_rcvd", "Multicast Packets Received" },
{ &stats->rx_broadcast, "bcast_pkts_rcvd", "Broadcast Packets Received" },
/* Tx Stats */
{ &stats->tx_bytes, "good_octets_txd", "Good Octets Transmitted" },
{ &stats->tx_unicast, "ucast_pkts_txd", "Unicast Packets Transmitted" },
{ &stats->tx_multicast, "mcast_pkts_txd", "Multicast Packets Transmitted" },
{ &stats->tx_broadcast, "bcast_pkts_txd", "Broadcast Packets Transmitted" },
/* End */
{ 0, 0, 0 }
};
struct sysctl_oid_list *parent_list = SYSCTL_CHILDREN(parent);
const struct ice_sysctl_info *entry = ctls;
while (entry->stat != 0) {
SYSCTL_ADD_U64(ctx, parent_list, OID_AUTO, entry->name,
CTLFLAG_RD | CTLFLAG_STATS, entry->stat, 0,
entry->description);
entry++;
}
}
/**
* ice_sysctl_tx_cso_stat - Display Tx checksum offload statistic
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: Tx CSO stat to read
* @req: sysctl request pointer
*
* On read: Sums the per-queue Tx CSO stat and displays it.
*/
static int
ice_sysctl_tx_cso_stat(SYSCTL_HANDLER_ARGS)
{
struct ice_vsi *vsi = (struct ice_vsi *)arg1;
enum ice_tx_cso_stat type = (enum ice_tx_cso_stat)arg2;
u64 stat = 0;
int i;
if (ice_driver_is_detaching(vsi->sc))
return (ESHUTDOWN);
/* Check that the type is valid */
if (type >= ICE_CSO_STAT_TX_COUNT)
return (EDOOFUS);
/* Sum the stat for each of the Tx queues */
for (i = 0; i < vsi->num_tx_queues; i++)
stat += vsi->tx_queues[i].stats.cso[type];
return sysctl_handle_64(oidp, NULL, stat, req);
}
/**
* ice_sysctl_rx_cso_stat - Display Rx checksum offload statistic
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: Rx CSO stat to read
* @req: sysctl request pointer
*
* On read: Sums the per-queue Rx CSO stat and displays it.
*/
static int
ice_sysctl_rx_cso_stat(SYSCTL_HANDLER_ARGS)
{
struct ice_vsi *vsi = (struct ice_vsi *)arg1;
enum ice_rx_cso_stat type = (enum ice_rx_cso_stat)arg2;
u64 stat = 0;
int i;
if (ice_driver_is_detaching(vsi->sc))
return (ESHUTDOWN);
/* Check that the type is valid */
if (type >= ICE_CSO_STAT_RX_COUNT)
return (EDOOFUS);
/* Sum the stat for each of the Rx queues */
for (i = 0; i < vsi->num_rx_queues; i++)
stat += vsi->rx_queues[i].stats.cso[type];
return sysctl_handle_64(oidp, NULL, stat, req);
}
/**
* @struct ice_rx_cso_stat_info
* @brief sysctl information for an Rx checksum offload statistic
*
* Structure used to simplify the process of defining the checksum offload
* statistics.
*/
struct ice_rx_cso_stat_info {
enum ice_rx_cso_stat type;
const char *name;
const char *description;
};
/**
* @struct ice_tx_cso_stat_info
* @brief sysctl information for a Tx checksum offload statistic
*
* Structure used to simplify the process of defining the checksum offload
* statistics.
*/
struct ice_tx_cso_stat_info {
enum ice_tx_cso_stat type;
const char *name;
const char *description;
};
/**
* ice_add_sysctls_sw_stats - Add sysctls for software statistics
* @vsi: pointer to the VSI to add sysctls for
* @ctx: sysctl ctx to use
* @parent: the parent node to add sysctls under
*
* Add statistics sysctls for software tracked statistics of a VSI.
*
* Currently this only adds checksum offload statistics, but more counters may
* be added in the future.
*/
static void
ice_add_sysctls_sw_stats(struct ice_vsi *vsi,
struct sysctl_ctx_list *ctx,
struct sysctl_oid *parent)
{
struct sysctl_oid *cso_node;
struct sysctl_oid_list *cso_list;
/* Tx CSO Stats */
const struct ice_tx_cso_stat_info tx_ctls[] = {
{ ICE_CSO_STAT_TX_TCP, "tx_tcp", "Transmit TCP Packets marked for HW checksum" },
{ ICE_CSO_STAT_TX_UDP, "tx_udp", "Transmit UDP Packets marked for HW checksum" },
{ ICE_CSO_STAT_TX_SCTP, "tx_sctp", "Transmit SCTP Packets marked for HW checksum" },
{ ICE_CSO_STAT_TX_IP4, "tx_ip4", "Transmit IPv4 Packets marked for HW checksum" },
{ ICE_CSO_STAT_TX_IP6, "tx_ip6", "Transmit IPv6 Packets marked for HW checksum" },
{ ICE_CSO_STAT_TX_L3_ERR, "tx_l3_err", "Transmit packets that driver failed to set L3 HW CSO bits for" },
{ ICE_CSO_STAT_TX_L4_ERR, "tx_l4_err", "Transmit packets that driver failed to set L4 HW CSO bits for" },
/* End */
{ ICE_CSO_STAT_TX_COUNT, 0, 0 }
};
/* Rx CSO Stats */
const struct ice_rx_cso_stat_info rx_ctls[] = {
{ ICE_CSO_STAT_RX_IP4_ERR, "rx_ip4_err", "Received packets with invalid IPv4 checksum indicated by HW" },
{ ICE_CSO_STAT_RX_IP6_ERR, "rx_ip6_err", "Received IPv6 packets with extension headers" },
{ ICE_CSO_STAT_RX_L3_ERR, "rx_l3_err", "Received packets with an unexpected invalid L3 checksum indicated by HW" },
{ ICE_CSO_STAT_RX_TCP_ERR, "rx_tcp_err", "Received packets with invalid TCP checksum indicated by HW" },
{ ICE_CSO_STAT_RX_UDP_ERR, "rx_udp_err", "Received packets with invalid UDP checksum indicated by HW" },
{ ICE_CSO_STAT_RX_SCTP_ERR, "rx_sctp_err", "Received packets with invalid SCTP checksum indicated by HW" },
{ ICE_CSO_STAT_RX_L4_ERR, "rx_l4_err", "Received packets with an unexpected invalid L4 checksum indicated by HW" },
/* End */
{ ICE_CSO_STAT_RX_COUNT, 0, 0 }
};
struct sysctl_oid_list *parent_list = SYSCTL_CHILDREN(parent);
/* Add a node for statistics tracked by software. */
cso_node = SYSCTL_ADD_NODE(ctx, parent_list, OID_AUTO, "cso", CTLFLAG_RD,
NULL, "Checksum offload Statistics");
cso_list = SYSCTL_CHILDREN(cso_node);
const struct ice_tx_cso_stat_info *tx_entry = tx_ctls;
while (tx_entry->name && tx_entry->description) {
SYSCTL_ADD_PROC(ctx, cso_list, OID_AUTO, tx_entry->name,
CTLTYPE_U64 | CTLFLAG_RD | CTLFLAG_STATS,
vsi, tx_entry->type, ice_sysctl_tx_cso_stat, "QU",
tx_entry->description);
tx_entry++;
}
const struct ice_rx_cso_stat_info *rx_entry = rx_ctls;
while (rx_entry->name && rx_entry->description) {
SYSCTL_ADD_PROC(ctx, cso_list, OID_AUTO, rx_entry->name,
CTLTYPE_U64 | CTLFLAG_RD | CTLFLAG_STATS,
vsi, rx_entry->type, ice_sysctl_rx_cso_stat, "QU",
rx_entry->description);
rx_entry++;
}
}
/**
* ice_add_vsi_sysctls - Add sysctls for a VSI
* @vsi: pointer to VSI structure
*
* Add various sysctls for a given VSI.
*/
void
ice_add_vsi_sysctls(struct ice_vsi *vsi)
{
struct sysctl_ctx_list *ctx = &vsi->ctx;
struct sysctl_oid *hw_node, *sw_node;
struct sysctl_oid_list *vsi_list, *hw_list, *sw_list;
vsi_list = SYSCTL_CHILDREN(vsi->vsi_node);
/* Keep hw stats in their own node. */
hw_node = SYSCTL_ADD_NODE(ctx, vsi_list, OID_AUTO, "hw", CTLFLAG_RD,
NULL, "VSI Hardware Statistics");
hw_list = SYSCTL_CHILDREN(hw_node);
/* Add the ethernet statistics for this VSI */
ice_add_sysctls_eth_stats(ctx, hw_node, &vsi->hw_stats.cur);
SYSCTL_ADD_U64(ctx, hw_list, OID_AUTO, "rx_discards",
CTLFLAG_RD | CTLFLAG_STATS, &vsi->hw_stats.cur.rx_discards,
0, "Discarded Rx Packets (see rx_errors or rx_no_desc)");
SYSCTL_ADD_U64(ctx, hw_list, OID_AUTO, "rx_errors",
CTLFLAG_RD | CTLFLAG_STATS, &vsi->hw_stats.cur.rx_errors,
0, "Rx Packets Discarded Due To Error");
SYSCTL_ADD_U64(ctx, hw_list, OID_AUTO, "rx_no_desc",
CTLFLAG_RD | CTLFLAG_STATS, &vsi->hw_stats.cur.rx_no_desc,
0, "Rx Packets Discarded Due To Lack Of Descriptors");
SYSCTL_ADD_U64(ctx, hw_list, OID_AUTO, "tx_errors",
CTLFLAG_RD | CTLFLAG_STATS, &vsi->hw_stats.cur.tx_errors,
0, "Tx Packets Discarded Due To Error");
/* Add a node for statistics tracked by software. */
sw_node = SYSCTL_ADD_NODE(ctx, vsi_list, OID_AUTO, "sw", CTLFLAG_RD,
NULL, "VSI Software Statistics");
sw_list = SYSCTL_CHILDREN(sw_node);
ice_add_sysctls_sw_stats(vsi, ctx, sw_node);
}
/**
* ice_add_sysctls_mac_stats - Add sysctls for global MAC statistics
* @ctx: the sysctl ctx to use
* @parent: parent node to add the sysctls under
* @stats: the hw ports stat structure to pull values from
*
* Add global MAC statistics sysctls.
*/
void
ice_add_sysctls_mac_stats(struct sysctl_ctx_list *ctx,
struct sysctl_oid *parent,
struct ice_hw_port_stats *stats)
{
struct sysctl_oid *mac_node;
struct sysctl_oid_list *parent_list, *mac_list;
parent_list = SYSCTL_CHILDREN(parent);
mac_node = SYSCTL_ADD_NODE(ctx, parent_list, OID_AUTO, "mac", CTLFLAG_RD,
NULL, "Mac Hardware Statistics");
mac_list = SYSCTL_CHILDREN(mac_node);
/* add the common ethernet statistics */
ice_add_sysctls_eth_stats(ctx, mac_node, &stats->eth);
const struct ice_sysctl_info ctls[] = {
/* Packet Reception Stats */
{&stats->rx_size_64, "rx_frames_64", "64 byte frames received"},
{&stats->rx_size_127, "rx_frames_65_127", "65-127 byte frames received"},
{&stats->rx_size_255, "rx_frames_128_255", "128-255 byte frames received"},
{&stats->rx_size_511, "rx_frames_256_511", "256-511 byte frames received"},
{&stats->rx_size_1023, "rx_frames_512_1023", "512-1023 byte frames received"},
{&stats->rx_size_1522, "rx_frames_1024_1522", "1024-1522 byte frames received"},
{&stats->rx_size_big, "rx_frames_big", "1523-9522 byte frames received"},
{&stats->rx_undersize, "rx_undersize", "Undersized packets received"},
{&stats->rx_fragments, "rx_fragmented", "Fragmented packets received"},
{&stats->rx_oversize, "rx_oversized", "Oversized packets received"},
{&stats->rx_jabber, "rx_jabber", "Received Jabber"},
{&stats->rx_len_errors, "rx_length_errors", "Receive Length Errors"},
{&stats->eth.rx_discards, "rx_discards",
"Discarded Rx Packets by Port (shortage of storage space)"},
/* Packet Transmission Stats */
{&stats->tx_size_64, "tx_frames_64", "64 byte frames transmitted"},
{&stats->tx_size_127, "tx_frames_65_127", "65-127 byte frames transmitted"},
{&stats->tx_size_255, "tx_frames_128_255", "128-255 byte frames transmitted"},
{&stats->tx_size_511, "tx_frames_256_511", "256-511 byte frames transmitted"},
{&stats->tx_size_1023, "tx_frames_512_1023", "512-1023 byte frames transmitted"},
{&stats->tx_size_1522, "tx_frames_1024_1522", "1024-1522 byte frames transmitted"},
{&stats->tx_size_big, "tx_frames_big", "1523-9522 byte frames transmitted"},
{&stats->tx_dropped_link_down, "tx_dropped", "Tx Dropped Due To Link Down"},
/* Flow control */
{&stats->link_xon_tx, "xon_txd", "Link XON transmitted"},
{&stats->link_xon_rx, "xon_recvd", "Link XON received"},
{&stats->link_xoff_tx, "xoff_txd", "Link XOFF transmitted"},
{&stats->link_xoff_rx, "xoff_recvd", "Link XOFF received"},
/* Other */
{&stats->crc_errors, "crc_errors", "CRC Errors"},
{&stats->illegal_bytes, "illegal_bytes", "Illegal Byte Errors"},
{&stats->mac_local_faults, "local_faults", "MAC Local Faults"},
{&stats->mac_remote_faults, "remote_faults", "MAC Remote Faults"},
/* End */
{ 0, 0, 0 }
};
const struct ice_sysctl_info *entry = ctls;
while (entry->stat != 0) {
SYSCTL_ADD_U64(ctx, mac_list, OID_AUTO, entry->name,
CTLFLAG_RD | CTLFLAG_STATS, entry->stat, 0,
entry->description);
entry++;
}
}
/**
* ice_configure_misc_interrupts - enable 'other' interrupt causes
* @sc: pointer to device private softc
*
* Enable various "other" interrupt causes, and associate them to interrupt 0,
* which is our administrative interrupt.
*/
void
ice_configure_misc_interrupts(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
u32 val;
/* Read the OICR register to clear it */
rd32(hw, PFINT_OICR);
/* Enable useful "other" interrupt causes */
val = (PFINT_OICR_ECC_ERR_M |
PFINT_OICR_MAL_DETECT_M |
PFINT_OICR_GRST_M |
PFINT_OICR_PCI_EXCEPTION_M |
PFINT_OICR_VFLR_M |
PFINT_OICR_HMC_ERR_M |
PFINT_OICR_PE_CRITERR_M);
wr32(hw, PFINT_OICR_ENA, val);
/* Note that since we're using MSI-X index 0, and ITR index 0, we do
* not explicitly program them when writing to the PFINT_*_CTL
* registers. Nevertheless, these writes are associating the
* interrupts with the ITR 0 vector
*/
/* Associate the OICR interrupt with ITR 0, and enable it */
wr32(hw, PFINT_OICR_CTL, PFINT_OICR_CTL_CAUSE_ENA_M);
/* Associate the Mailbox interrupt with ITR 0, and enable it */
wr32(hw, PFINT_MBX_CTL, PFINT_MBX_CTL_CAUSE_ENA_M);
/* Associate the AdminQ interrupt with ITR 0, and enable it */
wr32(hw, PFINT_FW_CTL, PFINT_FW_CTL_CAUSE_ENA_M);
}
/**
* ice_filter_is_mcast - Check if info is a multicast filter
* @vsi: vsi structure addresses are targeted towards
* @info: filter info
*
* @returns true if the provided info is a multicast filter, and false
* otherwise.
*/
static bool
ice_filter_is_mcast(struct ice_vsi *vsi, struct ice_fltr_info *info)
{
const u8 *addr = info->l_data.mac.mac_addr;
/*
* Check if this info matches a multicast filter added by
* ice_add_mac_to_list
*/
if ((info->flag == ICE_FLTR_TX) &&
(info->src_id == ICE_SRC_ID_VSI) &&
(info->lkup_type == ICE_SW_LKUP_MAC) &&
(info->vsi_handle == vsi->idx) &&
ETHER_IS_MULTICAST(addr) && !ETHER_IS_BROADCAST(addr))
return true;
return false;
}
/**
* @struct ice_mcast_sync_data
* @brief data used by ice_sync_one_mcast_filter function
*
* Structure used to store data needed for processing by the
* ice_sync_one_mcast_filter. This structure contains a linked list of filters
* to be added, an error indication, and a pointer to the device softc.
*/
struct ice_mcast_sync_data {
struct ice_list_head add_list;
struct ice_softc *sc;
int err;
};
/**
* ice_sync_one_mcast_filter - Check if we need to program the filter
* @p: void pointer to algorithm data
* @sdl: link level socket address
* @count: unused count value
*
* Called by if_foreach_llmaddr to operate on each filter in the ifp filter
* list. For the given address, search our internal list to see if we have
* found the filter. If not, add it to our list of filters that need to be
* programmed.
*
* @returns (1) if we've actually setup the filter to be added
*/
static u_int
ice_sync_one_mcast_filter(void *p, struct sockaddr_dl *sdl,
u_int __unused count)
{
struct ice_mcast_sync_data *data = (struct ice_mcast_sync_data *)p;
struct ice_softc *sc = data->sc;
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
const u8 *sdl_addr = (const u8 *)LLADDR(sdl);
struct ice_fltr_mgmt_list_entry *itr;
struct ice_list_head *rules;
int err;
rules = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules;
/*
* If a previous filter already indicated an error, there is no need
* for us to finish processing the rest of the filters.
*/
if (data->err)
return (0);
/* See if this filter has already been programmed */
LIST_FOR_EACH_ENTRY(itr, rules, ice_fltr_mgmt_list_entry, list_entry) {
struct ice_fltr_info *info = &itr->fltr_info;
const u8 *addr = info->l_data.mac.mac_addr;
/* Only check multicast filters */
if (!ice_filter_is_mcast(&sc->pf_vsi, info))
continue;
/*
* If this filter matches, mark the internal filter as
* "found", and exit.
*/
if (bcmp(addr, sdl_addr, ETHER_ADDR_LEN) == 0) {
itr->marker = ICE_FLTR_FOUND;
return (1);
}
}
/*
* If we failed to locate the filter in our internal list, we need to
* place it into our add list.
*/
err = ice_add_mac_to_list(&sc->pf_vsi, &data->add_list, sdl_addr,
ICE_FWD_TO_VSI);
if (err) {
device_printf(sc->dev,
"Failed to place MAC %6D onto add list, err %s\n",
sdl_addr, ":", ice_err_str(err));
data->err = err;
return (0);
}
return (1);
}
/**
* ice_sync_multicast_filters - Synchronize OS and internal filter list
* @sc: device private structure
*
* Called in response to SIOCDELMULTI to synchronize the operating system
* multicast address list with the internal list of filters programmed to
* firmware.
*
* Works in one phase to find added and deleted filters using a marker bit on
* the internal list.
*
* First, a loop over the internal list clears the marker bit. Second, for
* each filter in the ifp list is checked. If we find it in the internal list,
* the marker bit is set. Otherwise, the filter is added to the add list.
* Third, a loop over the internal list determines if any filters have not
* been found. Each of these is added to the delete list. Finally, the add and
* delete lists are programmed to firmware to update the filters.
*
* @returns zero on success or an integer error code on failure.
*/
int
ice_sync_multicast_filters(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
struct ice_fltr_mgmt_list_entry *itr;
struct ice_mcast_sync_data data = {};
struct ice_list_head *rules, remove_list;
enum ice_status status;
int err = 0;
INIT_LIST_HEAD(&data.add_list);
INIT_LIST_HEAD(&remove_list);
data.sc = sc;
data.err = 0;
rules = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules;
/* Acquire the lock for the entire duration */
ice_acquire_lock(&sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock);
/* (1) Reset the marker state for all filters */
LIST_FOR_EACH_ENTRY(itr, rules, ice_fltr_mgmt_list_entry, list_entry)
itr->marker = ICE_FLTR_NOT_FOUND;
/* (2) determine which filters need to be added and removed */
if_foreach_llmaddr(sc->ifp, ice_sync_one_mcast_filter, (void *)&data);
if (data.err) {
/* ice_sync_one_mcast_filter already prints an error */
err = data.err;
ice_release_lock(&sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock);
goto free_filter_lists;
}
LIST_FOR_EACH_ENTRY(itr, rules, ice_fltr_mgmt_list_entry, list_entry) {
struct ice_fltr_info *info = &itr->fltr_info;
const u8 *addr = info->l_data.mac.mac_addr;
/* Only check multicast filters */
if (!ice_filter_is_mcast(&sc->pf_vsi, info))
continue;
/*
* If the filter is not marked as found, then it must no
* longer be in the ifp address list, so we need to remove it.
*/
if (itr->marker == ICE_FLTR_NOT_FOUND) {
err = ice_add_mac_to_list(&sc->pf_vsi, &remove_list,
addr, ICE_FWD_TO_VSI);
if (err) {
device_printf(sc->dev,
"Failed to place MAC %6D onto remove list, err %s\n",
addr, ":", ice_err_str(err));
ice_release_lock(&sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock);
goto free_filter_lists;
}
}
}
ice_release_lock(&sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock);
status = ice_add_mac(hw, &data.add_list);
if (status) {
device_printf(sc->dev,
"Could not add new MAC filters, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
goto free_filter_lists;
}
status = ice_remove_mac(hw, &remove_list);
if (status) {
device_printf(sc->dev,
"Could not remove old MAC filters, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
goto free_filter_lists;
}
free_filter_lists:
ice_free_fltr_list(&data.add_list);
ice_free_fltr_list(&remove_list);
return (err);
}
/**
* ice_add_vlan_hw_filter - Add a VLAN filter for a given VSI
* @vsi: The VSI to add the filter for
* @vid: VLAN to add
*
* Programs a HW filter so that the given VSI will receive the specified VLAN.
*/
enum ice_status
ice_add_vlan_hw_filter(struct ice_vsi *vsi, u16 vid)
{
struct ice_hw *hw = &vsi->sc->hw;
struct ice_list_head vlan_list;
struct ice_fltr_list_entry vlan_entry;
INIT_LIST_HEAD(&vlan_list);
memset(&vlan_entry, 0, sizeof(vlan_entry));
vlan_entry.fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
vlan_entry.fltr_info.fltr_act = ICE_FWD_TO_VSI;
vlan_entry.fltr_info.flag = ICE_FLTR_TX;
vlan_entry.fltr_info.src_id = ICE_SRC_ID_VSI;
vlan_entry.fltr_info.vsi_handle = vsi->idx;
vlan_entry.fltr_info.l_data.vlan.vlan_id = vid;
LIST_ADD(&vlan_entry.list_entry, &vlan_list);
return ice_add_vlan(hw, &vlan_list);
}
/**
* ice_remove_vlan_hw_filter - Remove a VLAN filter for a given VSI
* @vsi: The VSI to add the filter for
* @vid: VLAN to remove
*
* Removes a previously programmed HW filter for the specified VSI.
*/
enum ice_status
ice_remove_vlan_hw_filter(struct ice_vsi *vsi, u16 vid)
{
struct ice_hw *hw = &vsi->sc->hw;
struct ice_list_head vlan_list;
struct ice_fltr_list_entry vlan_entry;
INIT_LIST_HEAD(&vlan_list);
memset(&vlan_entry, 0, sizeof(vlan_entry));
vlan_entry.fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
vlan_entry.fltr_info.fltr_act = ICE_FWD_TO_VSI;
vlan_entry.fltr_info.flag = ICE_FLTR_TX;
vlan_entry.fltr_info.src_id = ICE_SRC_ID_VSI;
vlan_entry.fltr_info.vsi_handle = vsi->idx;
vlan_entry.fltr_info.l_data.vlan.vlan_id = vid;
LIST_ADD(&vlan_entry.list_entry, &vlan_list);
return ice_remove_vlan(hw, &vlan_list);
}
#define ICE_SYSCTL_HELP_RX_ITR \
"\nControl Rx interrupt throttle rate." \
"\n\t0-8160 - sets interrupt rate in usecs" \
"\n\t -1 - reset the Rx itr to default"
/**
* ice_sysctl_rx_itr - Display or change the Rx ITR for a VSI
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the current Rx ITR value
* on write: Sets the Rx ITR value, reconfiguring device if it is up
*/
static int
ice_sysctl_rx_itr(SYSCTL_HANDLER_ARGS)
{
struct ice_vsi *vsi = (struct ice_vsi *)arg1;
struct ice_softc *sc = vsi->sc;
int increment, error = 0;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
error = sysctl_handle_16(oidp, &vsi->rx_itr, 0, req);
if ((error) || (req->newptr == NULL))
return (error);
if (vsi->rx_itr < 0)
vsi->rx_itr = ICE_DFLT_RX_ITR;
if (vsi->rx_itr > ICE_ITR_MAX)
vsi->rx_itr = ICE_ITR_MAX;
/* Assume 2usec increment if it hasn't been loaded yet */
increment = sc->hw.itr_gran ? : 2;
/* We need to round the value to the hardware's ITR granularity */
vsi->rx_itr = (vsi->rx_itr / increment ) * increment;
/* If the driver has finished initializing, then we need to reprogram
* the ITR registers now. Otherwise, they will be programmed during
* driver initialization.
*/
if (ice_test_state(&sc->state, ICE_STATE_DRIVER_INITIALIZED))
ice_configure_rx_itr(vsi);
return (0);
}
#define ICE_SYSCTL_HELP_TX_ITR \
"\nControl Tx interrupt throttle rate." \
"\n\t0-8160 - sets interrupt rate in usecs" \
"\n\t -1 - reset the Tx itr to default"
/**
* ice_sysctl_tx_itr - Display or change the Tx ITR for a VSI
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* On read: Displays the current Tx ITR value
* on write: Sets the Tx ITR value, reconfiguring device if it is up
*/
static int
ice_sysctl_tx_itr(SYSCTL_HANDLER_ARGS)
{
struct ice_vsi *vsi = (struct ice_vsi *)arg1;
struct ice_softc *sc = vsi->sc;
int increment, error = 0;
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
error = sysctl_handle_16(oidp, &vsi->tx_itr, 0, req);
if ((error) || (req->newptr == NULL))
return (error);
/* Allow configuring a negative value to reset to the default */
if (vsi->tx_itr < 0)
vsi->tx_itr = ICE_DFLT_TX_ITR;
if (vsi->tx_itr > ICE_ITR_MAX)
vsi->tx_itr = ICE_ITR_MAX;
/* Assume 2usec increment if it hasn't been loaded yet */
increment = sc->hw.itr_gran ? : 2;
/* We need to round the value to the hardware's ITR granularity */
vsi->tx_itr = (vsi->tx_itr / increment ) * increment;
/* If the driver has finished initializing, then we need to reprogram
* the ITR registers now. Otherwise, they will be programmed during
* driver initialization.
*/
if (ice_test_state(&sc->state, ICE_STATE_DRIVER_INITIALIZED))
ice_configure_tx_itr(vsi);
return (0);
}
/**
* ice_add_vsi_tunables - Add tunables and nodes for a VSI
* @vsi: pointer to VSI structure
* @parent: parent node to add the tunables under
*
* Create a sysctl context for the VSI, so that sysctls for the VSI can be
* dynamically removed upon VSI removal.
*
* Add various tunables and set up the basic node structure for the VSI. Must
* be called *prior* to ice_add_vsi_sysctls. It should be called as soon as
* possible after the VSI memory is initialized.
*
* VSI specific sysctls with CTLFLAG_TUN should be initialized here so that
* their values can be read from loader.conf prior to their first use in the
* driver.
*/
void
ice_add_vsi_tunables(struct ice_vsi *vsi, struct sysctl_oid *parent)
{
struct sysctl_oid_list *vsi_list;
char vsi_name[32], vsi_desc[32];
struct sysctl_oid_list *parent_list = SYSCTL_CHILDREN(parent);
/* Initialize the sysctl context for this VSI */
sysctl_ctx_init(&vsi->ctx);
/* Add a node to collect this VSI's statistics together */
snprintf(vsi_name, sizeof(vsi_name), "%u", vsi->idx);
snprintf(vsi_desc, sizeof(vsi_desc), "VSI %u", vsi->idx);
vsi->vsi_node = SYSCTL_ADD_NODE(&vsi->ctx, parent_list, OID_AUTO, vsi_name,
CTLFLAG_RD, NULL, vsi_desc);
vsi_list = SYSCTL_CHILDREN(vsi->vsi_node);
vsi->rx_itr = ICE_DFLT_TX_ITR;
SYSCTL_ADD_PROC(&vsi->ctx, vsi_list, OID_AUTO, "rx_itr",
CTLTYPE_S16 | CTLFLAG_RWTUN,
vsi, 0, ice_sysctl_rx_itr, "S",
ICE_SYSCTL_HELP_RX_ITR);
vsi->tx_itr = ICE_DFLT_TX_ITR;
SYSCTL_ADD_PROC(&vsi->ctx, vsi_list, OID_AUTO, "tx_itr",
CTLTYPE_S16 | CTLFLAG_RWTUN,
vsi, 0, ice_sysctl_tx_itr, "S",
ICE_SYSCTL_HELP_TX_ITR);
}
/**
* ice_del_vsi_sysctl_ctx - Delete the sysctl context(s) of a VSI
* @vsi: the VSI to remove contexts for
*
* Free the context for the VSI sysctls. This includes the main context, as
* well as the per-queue sysctls.
*/
void
ice_del_vsi_sysctl_ctx(struct ice_vsi *vsi)
{
device_t dev = vsi->sc->dev;
int err;
if (vsi->vsi_node) {
err = sysctl_ctx_free(&vsi->ctx);
if (err)
device_printf(dev, "failed to free VSI %d sysctl context, err %s\n",
vsi->idx, ice_err_str(err));
vsi->vsi_node = NULL;
}
}
/**
* ice_add_device_tunables - Add early tunable sysctls and sysctl nodes
* @sc: device private structure
*
* Add per-device dynamic tunable sysctls, and setup the general sysctl trees
* for re-use by ice_add_device_sysctls.
*
* In order for the sysctl fields to be initialized before use, this function
* should be called as early as possible during attach activities.
*
* Any non-global sysctl marked as CTLFLAG_TUN should likely be initialized
* here in this function, rather than later in ice_add_device_sysctls.
*
* To make things easier, this function is also expected to setup the various
* sysctl nodes in addition to tunables so that other sysctls which can't be
* initialized early can hook into the same nodes.
*/
void
ice_add_device_tunables(struct ice_softc *sc)
{
device_t dev = sc->dev;
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
struct sysctl_oid_list *ctx_list =
SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
/* Add a node to track VSI sysctls. Keep track of the node in the
* softc so that we can hook other sysctls into it later. This
* includes both the VSI statistics, as well as potentially dynamic
* VSIs in the future.
*/
sc->vsi_sysctls = SYSCTL_ADD_NODE(ctx, ctx_list, OID_AUTO, "vsi",
CTLFLAG_RD, NULL, "VSI Configuration and Statistics");
/* Add debug tunables */
ice_add_debug_tunables(sc);
}
/**
* ice_sysctl_dump_mac_filters - Dump a list of all HW MAC Filters
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "mac_filters" sysctl to dump the programmed MAC filters.
*/
static int
ice_sysctl_dump_mac_filters(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
struct ice_fltr_mgmt_list_entry *fm_entry;
struct ice_list_head *rule_head;
struct ice_lock *rule_lock;
struct ice_fltr_info *fi;
struct sbuf *sbuf;
int ret;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Wire the old buffer so we can take a non-sleepable lock */
ret = sysctl_wire_old_buffer(req, 0);
if (ret)
return (ret);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
rule_lock = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock;
rule_head = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules;
sbuf_printf(sbuf, "MAC Filter List");
ice_acquire_lock(rule_lock);
LIST_FOR_EACH_ENTRY(fm_entry, rule_head, ice_fltr_mgmt_list_entry, list_entry) {
fi = &fm_entry->fltr_info;
sbuf_printf(sbuf,
"\nmac = %6D, vsi_handle = %3d, fw_act_flag = %5s, lb_en = %1d, lan_en = %1d, fltr_act = %15s, fltr_rule_id = %d",
fi->l_data.mac.mac_addr, ":", fi->vsi_handle,
ice_fltr_flag_str(fi->flag), fi->lb_en, fi->lan_en,
ice_fwd_act_str(fi->fltr_act), fi->fltr_rule_id);
/* if we have a vsi_list_info, print some information about that */
if (fm_entry->vsi_list_info) {
sbuf_printf(sbuf,
", vsi_count = %3d, vsi_list_id = %3d, ref_cnt = %3d",
fm_entry->vsi_count,
fm_entry->vsi_list_info->vsi_list_id,
fm_entry->vsi_list_info->ref_cnt);
}
}
ice_release_lock(rule_lock);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_dump_vlan_filters - Dump a list of all HW VLAN Filters
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "vlan_filters" sysctl to dump the programmed VLAN filters.
*/
static int
ice_sysctl_dump_vlan_filters(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
struct ice_fltr_mgmt_list_entry *fm_entry;
struct ice_list_head *rule_head;
struct ice_lock *rule_lock;
struct ice_fltr_info *fi;
struct sbuf *sbuf;
int ret;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Wire the old buffer so we can take a non-sleepable lock */
ret = sysctl_wire_old_buffer(req, 0);
if (ret)
return (ret);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
rule_lock = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rule_lock;
rule_head = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rules;
sbuf_printf(sbuf, "VLAN Filter List");
ice_acquire_lock(rule_lock);
LIST_FOR_EACH_ENTRY(fm_entry, rule_head, ice_fltr_mgmt_list_entry, list_entry) {
fi = &fm_entry->fltr_info;
sbuf_printf(sbuf,
"\nvlan_id = %4d, vsi_handle = %3d, fw_act_flag = %5s, lb_en = %1d, lan_en = %1d, fltr_act = %15s, fltr_rule_id = %4d",
fi->l_data.vlan.vlan_id, fi->vsi_handle,
ice_fltr_flag_str(fi->flag), fi->lb_en, fi->lan_en,
ice_fwd_act_str(fi->fltr_act), fi->fltr_rule_id);
/* if we have a vsi_list_info, print some information about that */
if (fm_entry->vsi_list_info) {
sbuf_printf(sbuf,
", vsi_count = %3d, vsi_list_id = %3d, ref_cnt = %3d",
fm_entry->vsi_count,
fm_entry->vsi_list_info->vsi_list_id,
fm_entry->vsi_list_info->ref_cnt);
}
}
ice_release_lock(rule_lock);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_dump_ethertype_filters - Dump a list of all HW Ethertype filters
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "ethertype_filters" sysctl to dump the programmed Ethertype
* filters.
*/
static int
ice_sysctl_dump_ethertype_filters(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
struct ice_fltr_mgmt_list_entry *fm_entry;
struct ice_list_head *rule_head;
struct ice_lock *rule_lock;
struct ice_fltr_info *fi;
struct sbuf *sbuf;
int ret;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Wire the old buffer so we can take a non-sleepable lock */
ret = sysctl_wire_old_buffer(req, 0);
if (ret)
return (ret);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
rule_lock = &sw->recp_list[ICE_SW_LKUP_ETHERTYPE].filt_rule_lock;
rule_head = &sw->recp_list[ICE_SW_LKUP_ETHERTYPE].filt_rules;
sbuf_printf(sbuf, "Ethertype Filter List");
ice_acquire_lock(rule_lock);
LIST_FOR_EACH_ENTRY(fm_entry, rule_head, ice_fltr_mgmt_list_entry, list_entry) {
fi = &fm_entry->fltr_info;
sbuf_printf(sbuf,
"\nethertype = 0x%04x, vsi_handle = %3d, fw_act_flag = %5s, lb_en = %1d, lan_en = %1d, fltr_act = %15s, fltr_rule_id = %4d",
fi->l_data.ethertype_mac.ethertype,
fi->vsi_handle, ice_fltr_flag_str(fi->flag),
fi->lb_en, fi->lan_en, ice_fwd_act_str(fi->fltr_act),
fi->fltr_rule_id);
/* if we have a vsi_list_info, print some information about that */
if (fm_entry->vsi_list_info) {
sbuf_printf(sbuf,
", vsi_count = %3d, vsi_list_id = %3d, ref_cnt = %3d",
fm_entry->vsi_count,
fm_entry->vsi_list_info->vsi_list_id,
fm_entry->vsi_list_info->ref_cnt);
}
}
ice_release_lock(rule_lock);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_dump_ethertype_mac_filters - Dump a list of all HW Ethertype/MAC filters
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "ethertype_mac_filters" sysctl to dump the programmed
* Ethertype/MAC filters.
*/
static int
ice_sysctl_dump_ethertype_mac_filters(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
struct ice_switch_info *sw = hw->switch_info;
struct ice_fltr_mgmt_list_entry *fm_entry;
struct ice_list_head *rule_head;
struct ice_lock *rule_lock;
struct ice_fltr_info *fi;
struct sbuf *sbuf;
int ret;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Wire the old buffer so we can take a non-sleepable lock */
ret = sysctl_wire_old_buffer(req, 0);
if (ret)
return (ret);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
rule_lock = &sw->recp_list[ICE_SW_LKUP_ETHERTYPE_MAC].filt_rule_lock;
rule_head = &sw->recp_list[ICE_SW_LKUP_ETHERTYPE_MAC].filt_rules;
sbuf_printf(sbuf, "Ethertype/MAC Filter List");
ice_acquire_lock(rule_lock);
LIST_FOR_EACH_ENTRY(fm_entry, rule_head, ice_fltr_mgmt_list_entry, list_entry) {
fi = &fm_entry->fltr_info;
sbuf_printf(sbuf,
"\nethertype = 0x%04x, mac = %6D, vsi_handle = %3d, fw_act_flag = %5s, lb_en = %1d, lan_en = %1d, fltr_act = %15s, fltr_rule_id = %4d",
fi->l_data.ethertype_mac.ethertype,
fi->l_data.ethertype_mac.mac_addr, ":",
fi->vsi_handle, ice_fltr_flag_str(fi->flag),
fi->lb_en, fi->lan_en, ice_fwd_act_str(fi->fltr_act),
fi->fltr_rule_id);
/* if we have a vsi_list_info, print some information about that */
if (fm_entry->vsi_list_info) {
sbuf_printf(sbuf,
", vsi_count = %3d, vsi_list_id = %3d, ref_cnt = %3d",
fm_entry->vsi_count,
fm_entry->vsi_list_info->vsi_list_id,
fm_entry->vsi_list_info->ref_cnt);
}
}
ice_release_lock(rule_lock);
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_sysctl_dump_state_flags - Dump device driver state flags
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "state" sysctl to display currently set driver state flags.
*/
static int
ice_sysctl_dump_state_flags(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct sbuf *sbuf;
u32 copied_state;
unsigned int i;
bool at_least_one = false;
UNREFERENCED_PARAMETER(oidp);
UNREFERENCED_PARAMETER(arg2);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Make a copy of the state to ensure we display coherent values */
copied_state = atomic_load_acq_32(&sc->state);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
/* Add the string for each set state to the sbuf */
for (i = 0; i < 32; i++) {
if (copied_state & BIT(i)) {
const char *str = ice_state_to_str((enum ice_state)i);
at_least_one = true;
if (str)
sbuf_printf(sbuf, "\n%s", str);
else
sbuf_printf(sbuf, "\nBIT(%u)", i);
}
}
if (!at_least_one)
sbuf_printf(sbuf, "Nothing set");
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_add_debug_tunables - Add tunables helpful for debugging the device driver
* @sc: device private structure
*
* Add sysctl tunable values related to debugging the device driver. For now,
* this means a tunable to set the debug mask early during driver load.
*
* The debug node will be marked CTLFLAG_SKIP unless INVARIANTS is defined, so
* that in normal kernel builds, these will all be hidden, but on a debug
* kernel they will be more easily visible.
*/
static void
ice_add_debug_tunables(struct ice_softc *sc)
{
struct sysctl_oid_list *debug_list;
device_t dev = sc->dev;
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
struct sysctl_oid_list *ctx_list =
SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
sc->debug_sysctls = SYSCTL_ADD_NODE(ctx, ctx_list, OID_AUTO, "debug",
ICE_CTLFLAG_DEBUG | CTLFLAG_RD,
NULL, "Debug Sysctls");
debug_list = SYSCTL_CHILDREN(sc->debug_sysctls);
SYSCTL_ADD_U64(ctx, debug_list, OID_AUTO, "debug_mask",
CTLFLAG_RW | CTLFLAG_TUN, &sc->hw.debug_mask, 0,
"Debug message enable/disable mask");
/* Load the default value from the global sysctl first */
sc->enable_tx_fc_filter = ice_enable_tx_fc_filter;
SYSCTL_ADD_BOOL(ctx, debug_list, OID_AUTO, "enable_tx_fc_filter",
CTLFLAG_RDTUN, &sc->enable_tx_fc_filter, 0,
"Drop Ethertype 0x8808 control frames originating from software on this PF");
/* Load the default value from the global sysctl first */
sc->enable_tx_lldp_filter = ice_enable_tx_lldp_filter;
SYSCTL_ADD_BOOL(ctx, debug_list, OID_AUTO, "enable_tx_lldp_filter",
CTLFLAG_RDTUN, &sc->enable_tx_lldp_filter, 0,
"Drop Ethertype 0x88cc LLDP frames originating from software on this PF");
}
#define ICE_SYSCTL_HELP_REQUEST_RESET \
"\nRequest the driver to initiate a reset." \
"\n\tpfr - Initiate a PF reset" \
"\n\tcorer - Initiate a CORE reset" \
"\n\tglobr - Initiate a GLOBAL reset"
/**
* @var rl_sysctl_ticks
* @brief timestamp for latest reset request sysctl call
*
* Helps rate-limit the call to the sysctl which resets the device
*/
int rl_sysctl_ticks = 0;
/**
* ice_sysctl_request_reset - Request that the driver initiate a reset
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Callback for "request_reset" sysctl to request that the driver initiate
* a reset. Expects to be passed one of the following strings
*
* "pfr" - Initiate a PF reset
* "corer" - Initiate a CORE reset
* "globr" - Initiate a Global reset
*/
static int
ice_sysctl_request_reset(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
struct ice_hw *hw = &sc->hw;
enum ice_status status;
enum ice_reset_req reset_type = ICE_RESET_INVAL;
const char *reset_message;
int error = 0;
/* Buffer to store the requested reset string. Must contain enough
* space to store the largest expected reset string, which currently
* means 6 bytes of space.
*/
char reset[6] = "";
UNREFERENCED_PARAMETER(arg2);
error = priv_check(curthread, PRIV_DRIVER);
if (error)
return (error);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
/* Read in the requested reset type. */
error = sysctl_handle_string(oidp, reset, sizeof(reset), req);
if ((error) || (req->newptr == NULL))
return (error);
if (strcmp(reset, "pfr") == 0) {
reset_message = "Requesting a PF reset";
reset_type = ICE_RESET_PFR;
} else if (strcmp(reset, "corer") == 0) {
reset_message = "Initiating a CORE reset";
reset_type = ICE_RESET_CORER;
} else if (strcmp(reset, "globr") == 0) {
reset_message = "Initiating a GLOBAL reset";
reset_type = ICE_RESET_GLOBR;
} else if (strcmp(reset, "empr") == 0) {
device_printf(sc->dev, "Triggering an EMP reset via software is not currently supported\n");
return (EOPNOTSUPP);
}
if (reset_type == ICE_RESET_INVAL) {
device_printf(sc->dev, "%s is not a valid reset request\n", reset);
return (EINVAL);
}
/*
* Rate-limit the frequency at which this function is called.
* Assuming this is called successfully once, typically,
* everything should be handled within the allotted time frame.
* However, in the odd setup situations, we've also put in
* guards for when the reset has finished, but we're in the
* process of rebuilding. And instead of queueing an intent,
* simply error out and let the caller retry, if so desired.
*/
if (TICKS_2_MSEC(ticks - rl_sysctl_ticks) < 500) {
device_printf(sc->dev,
"Call frequency too high. Operation aborted.\n");
return (EBUSY);
}
rl_sysctl_ticks = ticks;
if (TICKS_2_MSEC(ticks - sc->rebuild_ticks) < 100) {
device_printf(sc->dev, "Device rebuilding. Operation aborted.\n");
return (EBUSY);
}
if (rd32(hw, GLGEN_RSTAT) & GLGEN_RSTAT_DEVSTATE_M) {
device_printf(sc->dev, "Device in reset. Operation aborted.\n");
return (EBUSY);
}
device_printf(sc->dev, "%s\n", reset_message);
/* Initiate the PF reset during the admin status task */
if (reset_type == ICE_RESET_PFR) {
ice_set_state(&sc->state, ICE_STATE_RESET_PFR_REQ);
return (0);
}
/*
* Other types of resets including CORE and GLOBAL resets trigger an
* interrupt on all PFs. Initiate the reset now. Preparation and
* rebuild logic will be handled by the admin status task.
*/
status = ice_reset(hw, reset_type);
/*
* Resets can take a long time and we still don't want another call
* to this function before we settle down.
*/
rl_sysctl_ticks = ticks;
if (status) {
device_printf(sc->dev, "failed to initiate device reset, err %s\n",
ice_status_str(status));
ice_set_state(&sc->state, ICE_STATE_RESET_FAILED);
return (EFAULT);
}
return (0);
}
/**
* ice_add_debug_sysctls - Add sysctls helpful for debugging the device driver
* @sc: device private structure
*
* Add sysctls related to debugging the device driver. Generally these should
* simply be sysctls which dump internal driver state, to aid in understanding
* what the driver is doing.
*/
static void
ice_add_debug_sysctls(struct ice_softc *sc)
{
struct sysctl_oid *sw_node;
struct sysctl_oid_list *debug_list, *sw_list;
device_t dev = sc->dev;
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
debug_list = SYSCTL_CHILDREN(sc->debug_sysctls);
SYSCTL_ADD_PROC(ctx, debug_list, OID_AUTO, "request_reset",
CTLTYPE_STRING | CTLFLAG_WR, sc, 0,
ice_sysctl_request_reset, "A",
ICE_SYSCTL_HELP_REQUEST_RESET);
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "pfr_count", CTLFLAG_RD,
&sc->soft_stats.pfr_count, 0, "# of PF resets handled");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "corer_count", CTLFLAG_RD,
&sc->soft_stats.corer_count, 0, "# of CORE resets handled");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "globr_count", CTLFLAG_RD,
&sc->soft_stats.globr_count, 0, "# of Global resets handled");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "empr_count", CTLFLAG_RD,
&sc->soft_stats.empr_count, 0, "# of EMP resets handled");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "tx_mdd_count", CTLFLAG_RD,
&sc->soft_stats.tx_mdd_count, 0, "# of Tx MDD events detected");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "rx_mdd_count", CTLFLAG_RD,
&sc->soft_stats.rx_mdd_count, 0, "# of Rx MDD events detected");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "state", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_dump_state_flags, "A", "Driver State Flags");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_type_low", CTLTYPE_U64 | CTLFLAG_RW,
sc, 0, ice_sysctl_phy_type_low, "QU",
"PHY type Low from Get PHY Caps/Set PHY Cfg");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_type_high", CTLTYPE_U64 | CTLFLAG_RW,
sc, 0, ice_sysctl_phy_type_high, "QU",
"PHY type High from Get PHY Caps/Set PHY Cfg");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_sw_caps", CTLTYPE_STRUCT | CTLFLAG_RD,
sc, 0, ice_sysctl_phy_sw_caps, "",
"Get PHY Capabilities (Software configuration)");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_nvm_caps", CTLTYPE_STRUCT | CTLFLAG_RD,
sc, 0, ice_sysctl_phy_nvm_caps, "",
"Get PHY Capabilities (NVM configuration)");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_topo_caps", CTLTYPE_STRUCT | CTLFLAG_RD,
sc, 0, ice_sysctl_phy_topo_caps, "",
"Get PHY Capabilities (Topology configuration)");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "phy_link_status", CTLTYPE_STRUCT | CTLFLAG_RD,
sc, 0, ice_sysctl_phy_link_status, "",
"Get PHY Link Status");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "read_i2c_diag_data", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_read_i2c_diag_data, "A",
"Dump selected diagnostic data from FW");
SYSCTL_ADD_U32(ctx, debug_list, OID_AUTO, "fw_build", CTLFLAG_RD,
&sc->hw.fw_build, 0, "FW Build ID");
SYSCTL_ADD_PROC(ctx, debug_list, OID_AUTO, "os_ddp_version", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_os_pkg_version, "A",
"DDP package name and version found in ice_ddp");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "cur_lldp_persist_status", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_fw_cur_lldp_persist_status, "A", "Current LLDP persistent status");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "dflt_lldp_persist_status", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_fw_dflt_lldp_persist_status, "A", "Default LLDP persistent status");
SYSCTL_ADD_PROC(ctx, debug_list,
OID_AUTO, "negotiated_fc", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_negotiated_fc, "A", "Current Negotiated Flow Control mode");
sw_node = SYSCTL_ADD_NODE(ctx, debug_list, OID_AUTO, "switch",
CTLFLAG_RD, NULL, "Switch Configuration");
sw_list = SYSCTL_CHILDREN(sw_node);
SYSCTL_ADD_PROC(ctx, sw_list,
OID_AUTO, "mac_filters", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_dump_mac_filters, "A", "MAC Filters");
SYSCTL_ADD_PROC(ctx, sw_list,
OID_AUTO, "vlan_filters", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_dump_vlan_filters, "A", "VLAN Filters");
SYSCTL_ADD_PROC(ctx, sw_list,
OID_AUTO, "ethertype_filters", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_dump_ethertype_filters, "A", "Ethertype Filters");
SYSCTL_ADD_PROC(ctx, sw_list,
OID_AUTO, "ethertype_mac_filters", CTLTYPE_STRING | CTLFLAG_RD,
sc, 0, ice_sysctl_dump_ethertype_mac_filters, "A", "Ethertype/MAC Filters");
}
/**
* ice_vsi_disable_tx - Disable (unconfigure) Tx queues for a VSI
* @vsi: the VSI to disable
*
* Disables the Tx queues associated with this VSI. Essentially the opposite
* of ice_cfg_vsi_for_tx.
*/
int
ice_vsi_disable_tx(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
enum ice_status status;
u32 *q_teids;
u16 *q_ids, *q_handles;
int i, err = 0;
if (vsi->num_tx_queues > 255)
return (ENOSYS);
q_teids = (u32 *)malloc(sizeof(*q_teids) * vsi->num_tx_queues,
M_ICE, M_NOWAIT|M_ZERO);
if (!q_teids)
return (ENOMEM);
q_ids = (u16 *)malloc(sizeof(*q_ids) * vsi->num_tx_queues,
M_ICE, M_NOWAIT|M_ZERO);
if (!q_ids) {
err = (ENOMEM);
goto free_q_teids;
}
q_handles = (u16 *)malloc(sizeof(*q_handles) * vsi->num_tx_queues,
M_ICE, M_NOWAIT|M_ZERO);
if (!q_handles) {
err = (ENOMEM);
goto free_q_ids;
}
for (i = 0; i < vsi->num_tx_queues; i++) {
struct ice_tx_queue *txq = &vsi->tx_queues[i];
q_ids[i] = vsi->tx_qmap[i];
q_handles[i] = i;
q_teids[i] = txq->q_teid;
}
status = ice_dis_vsi_txq(hw->port_info, vsi->idx, 0, vsi->num_tx_queues,
q_handles, q_ids, q_teids, ICE_NO_RESET, 0, NULL);
if (status == ICE_ERR_DOES_NOT_EXIST) {
; /* Queues have already been disabled, no need to report this as an error */
} else if (status == ICE_ERR_RESET_ONGOING) {
device_printf(sc->dev,
"Reset in progress. LAN Tx queues already disabled\n");
} else if (status) {
device_printf(sc->dev,
"Failed to disable LAN Tx queues: err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
err = (ENODEV);
}
/* free_q_handles: */
free(q_handles, M_ICE);
free_q_ids:
free(q_ids, M_ICE);
free_q_teids:
free(q_teids, M_ICE);
return err;
}
/**
* ice_vsi_set_rss_params - Set the RSS parameters for the VSI
* @vsi: the VSI to configure
*
* Sets the RSS table size and lookup table type for the VSI based on its
* VSI type.
*/
static void
ice_vsi_set_rss_params(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
struct ice_hw_common_caps *cap;
cap = &sc->hw.func_caps.common_cap;
switch (vsi->type) {
case ICE_VSI_PF:
/* The PF VSI inherits RSS instance of the PF */
vsi->rss_table_size = cap->rss_table_size;
vsi->rss_lut_type = ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_PF;
break;
case ICE_VSI_VF:
vsi->rss_table_size = ICE_VSIQF_HLUT_ARRAY_SIZE;
vsi->rss_lut_type = ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_VSI;
break;
default:
device_printf(sc->dev,
"VSI %d: RSS not supported for VSI type %d\n",
vsi->idx, vsi->type);
break;
}
}
/**
* ice_vsi_add_txqs_ctx - Create a sysctl context and node to store txq sysctls
* @vsi: The VSI to add the context for
*
* Creates a sysctl context for storing txq sysctls. Additionally creates
* a node rooted at the given VSI's main sysctl node. This context will be
* used to store per-txq sysctls which may need to be released during the
* driver's lifetime.
*/
void
ice_vsi_add_txqs_ctx(struct ice_vsi *vsi)
{
struct sysctl_oid_list *vsi_list;
sysctl_ctx_init(&vsi->txqs_ctx);
vsi_list = SYSCTL_CHILDREN(vsi->vsi_node);
vsi->txqs_node = SYSCTL_ADD_NODE(&vsi->txqs_ctx, vsi_list, OID_AUTO, "txqs",
CTLFLAG_RD, NULL, "Tx Queues");
}
/**
* ice_vsi_add_rxqs_ctx - Create a sysctl context and node to store rxq sysctls
* @vsi: The VSI to add the context for
*
* Creates a sysctl context for storing rxq sysctls. Additionally creates
* a node rooted at the given VSI's main sysctl node. This context will be
* used to store per-rxq sysctls which may need to be released during the
* driver's lifetime.
*/
void
ice_vsi_add_rxqs_ctx(struct ice_vsi *vsi)
{
struct sysctl_oid_list *vsi_list;
sysctl_ctx_init(&vsi->rxqs_ctx);
vsi_list = SYSCTL_CHILDREN(vsi->vsi_node);
vsi->rxqs_node = SYSCTL_ADD_NODE(&vsi->rxqs_ctx, vsi_list, OID_AUTO, "rxqs",
CTLFLAG_RD, NULL, "Rx Queues");
}
/**
* ice_vsi_del_txqs_ctx - Delete the Tx queue sysctl context for this VSI
* @vsi: The VSI to delete from
*
* Frees the txq sysctl context created for storing the per-queue Tx sysctls.
* Must be called prior to freeing the Tx queue memory, in order to avoid
* having sysctls point at stale memory.
*/
void
ice_vsi_del_txqs_ctx(struct ice_vsi *vsi)
{
device_t dev = vsi->sc->dev;
int err;
if (vsi->txqs_node) {
err = sysctl_ctx_free(&vsi->txqs_ctx);
if (err)
device_printf(dev, "failed to free VSI %d txqs_ctx, err %s\n",
vsi->idx, ice_err_str(err));
vsi->txqs_node = NULL;
}
}
/**
* ice_vsi_del_rxqs_ctx - Delete the Rx queue sysctl context for this VSI
* @vsi: The VSI to delete from
*
* Frees the rxq sysctl context created for storing the per-queue Rx sysctls.
* Must be called prior to freeing the Rx queue memory, in order to avoid
* having sysctls point at stale memory.
*/
void
ice_vsi_del_rxqs_ctx(struct ice_vsi *vsi)
{
device_t dev = vsi->sc->dev;
int err;
if (vsi->rxqs_node) {
err = sysctl_ctx_free(&vsi->rxqs_ctx);
if (err)
device_printf(dev, "failed to free VSI %d rxqs_ctx, err %s\n",
vsi->idx, ice_err_str(err));
vsi->rxqs_node = NULL;
}
}
/**
* ice_add_txq_sysctls - Add per-queue sysctls for a Tx queue
* @txq: pointer to the Tx queue
*
* Add per-queue sysctls for a given Tx queue. Can't be called during
* ice_add_vsi_sysctls, since the queue memory has not yet been setup.
*/
void
ice_add_txq_sysctls(struct ice_tx_queue *txq)
{
struct ice_vsi *vsi = txq->vsi;
struct sysctl_ctx_list *ctx = &vsi->txqs_ctx;
struct sysctl_oid_list *txqs_list, *this_txq_list;
struct sysctl_oid *txq_node;
char txq_name[32], txq_desc[32];
const struct ice_sysctl_info ctls[] = {
{ &txq->stats.tx_packets, "tx_packets", "Queue Packets Transmitted" },
{ &txq->stats.tx_bytes, "tx_bytes", "Queue Bytes Transmitted" },
{ &txq->stats.mss_too_small, "mss_too_small", "TSO sends with an MSS less than 64" },
{ 0, 0, 0 }
};
const struct ice_sysctl_info *entry = ctls;
txqs_list = SYSCTL_CHILDREN(vsi->txqs_node);
snprintf(txq_name, sizeof(txq_name), "%u", txq->me);
snprintf(txq_desc, sizeof(txq_desc), "Tx Queue %u", txq->me);
txq_node = SYSCTL_ADD_NODE(ctx, txqs_list, OID_AUTO, txq_name,
CTLFLAG_RD, NULL, txq_desc);
this_txq_list = SYSCTL_CHILDREN(txq_node);
/* Add the Tx queue statistics */
while (entry->stat != 0) {
SYSCTL_ADD_U64(ctx, this_txq_list, OID_AUTO, entry->name,
CTLFLAG_RD | CTLFLAG_STATS, entry->stat, 0,
entry->description);
entry++;
}
}
/**
* ice_add_rxq_sysctls - Add per-queue sysctls for an Rx queue
* @rxq: pointer to the Rx queue
*
* Add per-queue sysctls for a given Rx queue. Can't be called during
* ice_add_vsi_sysctls, since the queue memory has not yet been setup.
*/
void
ice_add_rxq_sysctls(struct ice_rx_queue *rxq)
{
struct ice_vsi *vsi = rxq->vsi;
struct sysctl_ctx_list *ctx = &vsi->rxqs_ctx;
struct sysctl_oid_list *rxqs_list, *this_rxq_list;
struct sysctl_oid *rxq_node;
char rxq_name[32], rxq_desc[32];
const struct ice_sysctl_info ctls[] = {
{ &rxq->stats.rx_packets, "rx_packets", "Queue Packets Received" },
{ &rxq->stats.rx_bytes, "rx_bytes", "Queue Bytes Received" },
{ &rxq->stats.desc_errs, "rx_desc_errs", "Queue Rx Descriptor Errors" },
{ 0, 0, 0 }
};
const struct ice_sysctl_info *entry = ctls;
rxqs_list = SYSCTL_CHILDREN(vsi->rxqs_node);
snprintf(rxq_name, sizeof(rxq_name), "%u", rxq->me);
snprintf(rxq_desc, sizeof(rxq_desc), "Rx Queue %u", rxq->me);
rxq_node = SYSCTL_ADD_NODE(ctx, rxqs_list, OID_AUTO, rxq_name,
CTLFLAG_RD, NULL, rxq_desc);
this_rxq_list = SYSCTL_CHILDREN(rxq_node);
/* Add the Rx queue statistics */
while (entry->stat != 0) {
SYSCTL_ADD_U64(ctx, this_rxq_list, OID_AUTO, entry->name,
CTLFLAG_RD | CTLFLAG_STATS, entry->stat, 0,
entry->description);
entry++;
}
}
/**
* ice_get_default_rss_key - Obtain a default RSS key
* @seed: storage for the RSS key data
*
* Copies a pre-generated RSS key into the seed memory. The seed pointer must
* point to a block of memory that is at least 40 bytes in size.
*
* The key isn't randomly generated each time this function is called because
* that makes the RSS key change every time we reconfigure RSS. This does mean
* that we're hard coding a possibly 'well known' key. We might want to
* investigate randomly generating this key once during the first call.
*/
static void
ice_get_default_rss_key(u8 *seed)
{
const u8 default_seed[ICE_AQC_GET_SET_RSS_KEY_DATA_RSS_KEY_SIZE] = {
0x39, 0xed, 0xff, 0x4d, 0x43, 0x58, 0x42, 0xc3, 0x5f, 0xb8,
0xa5, 0x32, 0x95, 0x65, 0x81, 0xcd, 0x36, 0x79, 0x71, 0x97,
0xde, 0xa4, 0x41, 0x40, 0x6f, 0x27, 0xe9, 0x81, 0x13, 0xa0,
0x95, 0x93, 0x5b, 0x1e, 0x9d, 0x27, 0x9d, 0x24, 0x84, 0xb5,
};
bcopy(default_seed, seed, ICE_AQC_GET_SET_RSS_KEY_DATA_RSS_KEY_SIZE);
}
/**
* ice_set_rss_key - Configure a given VSI with the default RSS key
* @vsi: the VSI to configure
*
* Program the hardware RSS key. We use rss_getkey to grab the kernel RSS key.
* If the kernel RSS interface is not available, this will fall back to our
* pre-generated hash seed from ice_get_default_rss_key().
*/
static int
ice_set_rss_key(struct ice_vsi *vsi)
{
struct ice_aqc_get_set_rss_keys keydata = { .standard_rss_key = {0} };
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
enum ice_status status;
/*
* If the RSS kernel interface is disabled, this will return the
* default RSS key above.
*/
rss_getkey(keydata.standard_rss_key);
status = ice_aq_set_rss_key(hw, vsi->idx, &keydata);
if (status) {
device_printf(sc->dev,
"ice_aq_set_rss_key status %s, error %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
return (0);
}
/**
* ice_set_rss_flow_flds - Program the RSS hash flows after package init
* @vsi: the VSI to configure
*
* If the package file is initialized, the default RSS flows are reset. We
* need to reprogram the expected hash configuration. We'll use
* rss_gethashconfig() to determine which flows to enable. If RSS kernel
* support is not enabled, this macro will fall back to suitable defaults.
*/
static void
ice_set_rss_flow_flds(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
u_int rss_hash_config;
rss_hash_config = rss_gethashconfig();
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV4) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_FLOW_HASH_IPV4,
ICE_FLOW_SEG_HDR_IPV4);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for ipv4 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV4) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_HASH_TCP_IPV4,
ICE_FLOW_SEG_HDR_TCP | ICE_FLOW_SEG_HDR_IPV4);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for tcp4 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV4) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_HASH_UDP_IPV4,
ICE_FLOW_SEG_HDR_UDP | ICE_FLOW_SEG_HDR_IPV4);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for udp4 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
if (rss_hash_config & (RSS_HASHTYPE_RSS_IPV6 | RSS_HASHTYPE_RSS_IPV6_EX)) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_FLOW_HASH_IPV6,
ICE_FLOW_SEG_HDR_IPV6);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for ipv6 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV6) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_HASH_TCP_IPV6,
ICE_FLOW_SEG_HDR_TCP | ICE_FLOW_SEG_HDR_IPV6);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for tcp6 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV6) {
status = ice_add_rss_cfg(hw, vsi->idx, ICE_HASH_UDP_IPV6,
ICE_FLOW_SEG_HDR_UDP | ICE_FLOW_SEG_HDR_IPV6);
if (status)
device_printf(dev,
"ice_add_rss_cfg on VSI %d failed for udp6 flow, err %s aq_err %s\n",
vsi->idx, ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
}
/* Warn about RSS hash types which are not supported */
/* coverity[dead_error_condition] */
if (rss_hash_config & ~ICE_DEFAULT_RSS_HASH_CONFIG) {
device_printf(dev,
"ice_add_rss_cfg on VSI %d could not configure every requested hash type\n",
vsi->idx);
}
}
/**
* ice_set_rss_lut - Program the RSS lookup table for a VSI
* @vsi: the VSI to configure
*
* Programs the RSS lookup table for a given VSI. We use
* rss_get_indirection_to_bucket which will use the indirection table provided
* by the kernel RSS interface when available. If the kernel RSS interface is
* not available, we will fall back to a simple round-robin fashion queue
* assignment.
*/
static int
ice_set_rss_lut(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int i, err = 0;
u8 *lut;
lut = (u8 *)malloc(vsi->rss_table_size, M_ICE, M_NOWAIT|M_ZERO);
if (!lut) {
device_printf(dev, "Failed to allocate RSS lut memory\n");
return (ENOMEM);
}
/* Populate the LUT with max no. of queues. If the RSS kernel
* interface is disabled, this will assign the lookup table in
* a simple round robin fashion
*/
for (i = 0; i < vsi->rss_table_size; i++) {
/* XXX: this needs to be changed if num_rx_queues ever counts
* more than just the RSS queues */
lut[i] = rss_get_indirection_to_bucket(i) % vsi->num_rx_queues;
}
status = ice_aq_set_rss_lut(hw, vsi->idx, vsi->rss_lut_type,
lut, vsi->rss_table_size);
if (status) {
device_printf(dev,
"Cannot set RSS lut, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
}
free(lut, M_ICE);
return err;
}
/**
* ice_config_rss - Configure RSS for a VSI
* @vsi: the VSI to configure
*
* If FEATURE_RSS is enabled, configures the RSS lookup table and hash key for
* a given VSI.
*/
int
ice_config_rss(struct ice_vsi *vsi)
{
int err;
/* Nothing to do, if RSS is not enabled */
if (!ice_is_bit_set(vsi->sc->feat_en, ICE_FEATURE_RSS))
return 0;
err = ice_set_rss_key(vsi);
if (err)
return err;
ice_set_rss_flow_flds(vsi);
return ice_set_rss_lut(vsi);
}
/**
* ice_log_pkg_init - Log a message about status of DDP initialization
* @sc: the device softc pointer
* @pkg_status: the status result of ice_copy_and_init_pkg
*
* Called by ice_load_pkg after an attempt to download the DDP package
* contents to the device. Determines whether the download was successful or
* not and logs an appropriate message for the system administrator.
*
* @post if a DDP package was previously downloaded on another port and it
* is not compatible with this driver, pkg_status will be updated to reflect
* this, and the driver will transition to safe mode.
*/
void
ice_log_pkg_init(struct ice_softc *sc, enum ice_status *pkg_status)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
struct sbuf *active_pkg, *os_pkg;
active_pkg = sbuf_new_auto();
ice_active_pkg_version_str(hw, active_pkg);
sbuf_finish(active_pkg);
os_pkg = sbuf_new_auto();
ice_os_pkg_version_str(hw, os_pkg);
sbuf_finish(os_pkg);
switch (*pkg_status) {
case ICE_SUCCESS:
/* The package download AdminQ command returned success because
* this download succeeded or ICE_ERR_AQ_NO_WORK since there is
* already a package loaded on the device.
*/
if (hw->pkg_ver.major == hw->active_pkg_ver.major &&
hw->pkg_ver.minor == hw->active_pkg_ver.minor &&
hw->pkg_ver.update == hw->active_pkg_ver.update &&
hw->pkg_ver.draft == hw->active_pkg_ver.draft &&
!memcmp(hw->pkg_name, hw->active_pkg_name,
sizeof(hw->pkg_name))) {
switch (hw->pkg_dwnld_status) {
case ICE_AQ_RC_OK:
device_printf(dev,
"The DDP package was successfully loaded: %s.\n",
sbuf_data(active_pkg));
break;
case ICE_AQ_RC_EEXIST:
device_printf(dev,
"DDP package already present on device: %s.\n",
sbuf_data(active_pkg));
break;
default:
/* We do not expect this to occur, but the
* extra messaging is here in case something
* changes in the ice_init_pkg flow.
*/
device_printf(dev,
"DDP package already present on device: %s. An unexpected error occurred, pkg_dwnld_status %s.\n",
sbuf_data(active_pkg),
ice_aq_str(hw->pkg_dwnld_status));
break;
}
} else if (pkg_ver_compatible(&hw->active_pkg_ver) == 0) {
device_printf(dev,
"The driver could not load the DDP package file because a compatible DDP package is already present on the device. The device has package %s. The ice_ddp module has package: %s.\n",
sbuf_data(active_pkg),
sbuf_data(os_pkg));
} else if (pkg_ver_compatible(&hw->active_pkg_ver) > 0) {
device_printf(dev,
"The device has a DDP package that is higher than the driver supports. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
*pkg_status = ICE_ERR_NOT_SUPPORTED;
} else {
device_printf(dev,
"The device has a DDP package that is lower than the driver supports. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
*pkg_status = ICE_ERR_NOT_SUPPORTED;
}
break;
case ICE_ERR_NOT_SUPPORTED:
/*
* This assumes that the active_pkg_ver will not be
* initialized if the ice_ddp package version is not
* supported.
*/
if (pkg_ver_empty(&hw->active_pkg_ver, hw->active_pkg_name)) {
/* The ice_ddp version is not supported */
if (pkg_ver_compatible(&hw->pkg_ver) > 0) {
device_printf(dev,
"The DDP package in the ice_ddp module is higher than the driver supports. The ice_ddp module has package %s. The driver requires version %d.%d.x.x. Please use an updated driver. Entering Safe Mode.\n",
sbuf_data(os_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
} else if (pkg_ver_compatible(&hw->pkg_ver) < 0) {
device_printf(dev,
"The DDP package in the ice_ddp module is lower than the driver supports. The ice_ddp module has package %s. The driver requires version %d.%d.x.x. Please use an updated ice_ddp module. Entering Safe Mode.\n",
sbuf_data(os_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
} else {
device_printf(dev,
"An unknown error (%s aq_err %s) occurred when loading the DDP package. The ice_ddp module has package %s. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
ice_status_str(*pkg_status),
ice_aq_str(hw->pkg_dwnld_status),
sbuf_data(os_pkg),
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
}
} else {
if (pkg_ver_compatible(&hw->active_pkg_ver) > 0) {
device_printf(dev,
"The device has a DDP package that is higher than the driver supports. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
} else if (pkg_ver_compatible(&hw->active_pkg_ver) < 0) {
device_printf(dev,
"The device has a DDP package that is lower than the driver supports. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
} else {
device_printf(dev,
"An unknown error (%s aq_err %s) occurred when loading the DDP package. The ice_ddp module has package %s. The device has package %s. The driver requires version %d.%d.x.x. Entering Safe Mode.\n",
ice_status_str(*pkg_status),
ice_aq_str(hw->pkg_dwnld_status),
sbuf_data(os_pkg),
sbuf_data(active_pkg),
ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR);
}
}
break;
case ICE_ERR_CFG:
case ICE_ERR_BUF_TOO_SHORT:
case ICE_ERR_PARAM:
device_printf(dev,
"The DDP package in the ice_ddp module is invalid. Entering Safe Mode\n");
break;
case ICE_ERR_FW_DDP_MISMATCH:
device_printf(dev,
"The firmware loaded on the device is not compatible with the DDP package. Please update the device's NVM. Entering safe mode.\n");
break;
case ICE_ERR_AQ_ERROR:
switch (hw->pkg_dwnld_status) {
case ICE_AQ_RC_ENOSEC:
case ICE_AQ_RC_EBADSIG:
device_printf(dev,
"The DDP package in the ice_ddp module cannot be loaded because its signature is not valid. Please use a valid ice_ddp module. Entering Safe Mode.\n");
goto free_sbufs;
case ICE_AQ_RC_ESVN:
device_printf(dev,
"The DDP package in the ice_ddp module could not be loaded because its security revision is too low. Please use an updated ice_ddp module. Entering Safe Mode.\n");
goto free_sbufs;
case ICE_AQ_RC_EBADMAN:
case ICE_AQ_RC_EBADBUF:
device_printf(dev,
"An error occurred on the device while loading the DDP package. Entering Safe Mode.\n");
goto free_sbufs;
default:
break;
}
/* fall-through */
default:
device_printf(dev,
"An unknown error (%s aq_err %s) occurred when loading the DDP package. Entering Safe Mode.\n",
ice_status_str(*pkg_status),
ice_aq_str(hw->pkg_dwnld_status));
break;
}
free_sbufs:
sbuf_delete(active_pkg);
sbuf_delete(os_pkg);
}
/**
* ice_load_pkg_file - Load the DDP package file using firmware_get
* @sc: device private softc
*
* Use firmware_get to load the DDP package memory and then request that
* firmware download the package contents and program the relevant hardware
* bits.
*
* This function makes a copy of the DDP package memory which is tracked in
* the ice_hw structure. The copy will be managed and released by
* ice_deinit_hw(). This allows the firmware reference to be immediately
* released using firmware_put.
*/
void
ice_load_pkg_file(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
const struct firmware *pkg;
pkg = firmware_get("ice_ddp");
if (!pkg) {
device_printf(dev, "The DDP package module (ice_ddp) failed to load or could not be found. Entering Safe Mode.\n");
if (cold)
device_printf(dev,
"The DDP package module cannot be automatically loaded while booting. You may want to specify ice_ddp_load=\"YES\" in your loader.conf\n");
ice_set_bit(ICE_FEATURE_SAFE_MODE, sc->feat_cap);
ice_set_bit(ICE_FEATURE_SAFE_MODE, sc->feat_en);
return;
}
/* Copy and download the pkg contents */
status = ice_copy_and_init_pkg(hw, (const u8 *)pkg->data, pkg->datasize);
/* Release the firmware reference */
firmware_put(pkg, FIRMWARE_UNLOAD);
/* Check the active DDP package version and log a message */
ice_log_pkg_init(sc, &status);
/* Place the driver into safe mode */
if (status != ICE_SUCCESS) {
ice_set_bit(ICE_FEATURE_SAFE_MODE, sc->feat_cap);
ice_set_bit(ICE_FEATURE_SAFE_MODE, sc->feat_en);
}
}
/**
* ice_get_ifnet_counter - Retrieve counter value for a given ifnet counter
* @vsi: the vsi to retrieve the value for
* @counter: the counter type to retrieve
*
* Returns the value for a given ifnet counter. To do so, we calculate the
* value based on the matching hardware statistics.
*/
uint64_t
ice_get_ifnet_counter(struct ice_vsi *vsi, ift_counter counter)
{
struct ice_hw_port_stats *hs = &vsi->sc->stats.cur;
struct ice_eth_stats *es = &vsi->hw_stats.cur;
/* For some statistics, especially those related to error flows, we do
* not have per-VSI counters. In this case, we just report the global
* counters.
*/
switch (counter) {
case IFCOUNTER_IPACKETS:
return (es->rx_unicast + es->rx_multicast + es->rx_broadcast);
case IFCOUNTER_IERRORS:
return (hs->crc_errors + hs->illegal_bytes +
hs->mac_local_faults + hs->mac_remote_faults +
hs->rx_len_errors + hs->rx_undersize +
hs->rx_oversize + hs->rx_fragments + hs->rx_jabber);
case IFCOUNTER_OPACKETS:
return (es->tx_unicast + es->tx_multicast + es->tx_broadcast);
case IFCOUNTER_OERRORS:
return (es->tx_errors);
case IFCOUNTER_COLLISIONS:
return (0);
case IFCOUNTER_IBYTES:
return (es->rx_bytes);
case IFCOUNTER_OBYTES:
return (es->tx_bytes);
case IFCOUNTER_IMCASTS:
return (es->rx_multicast);
case IFCOUNTER_OMCASTS:
return (es->tx_multicast);
case IFCOUNTER_IQDROPS:
return (es->rx_discards);
case IFCOUNTER_OQDROPS:
return (hs->tx_dropped_link_down);
case IFCOUNTER_NOPROTO:
return (es->rx_unknown_protocol);
default:
return if_get_counter_default(vsi->sc->ifp, counter);
}
}
/**
* ice_save_pci_info - Save PCI configuration fields in HW struct
* @hw: the ice_hw struct to save the PCI information in
* @dev: the device to get the PCI information from
*
* This should only be called once, early in the device attach
* process.
*/
void
ice_save_pci_info(struct ice_hw *hw, device_t dev)
{
hw->vendor_id = pci_get_vendor(dev);
hw->device_id = pci_get_device(dev);
hw->subsystem_vendor_id = pci_get_subvendor(dev);
hw->subsystem_device_id = pci_get_subdevice(dev);
hw->revision_id = pci_get_revid(dev);
hw->bus.device = pci_get_slot(dev);
hw->bus.func = pci_get_function(dev);
}
/**
* ice_replay_all_vsi_cfg - Replace configuration for all VSIs after reset
* @sc: the device softc
*
* Replace the configuration for each VSI, and then cleanup replay
* information. Called after a hardware reset in order to reconfigure the
* active VSIs.
*/
int
ice_replay_all_vsi_cfg(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
enum ice_status status;
int i;
for (i = 0 ; i < sc->num_available_vsi; i++) {
struct ice_vsi *vsi = sc->all_vsi[i];
if (!vsi)
continue;
status = ice_replay_vsi(hw, vsi->idx);
if (status) {
device_printf(sc->dev, "Failed to replay VSI %d, err %s aq_err %s\n",
vsi->idx, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
}
/* Cleanup replay filters after successful reconfiguration */
ice_replay_post(hw);
return (0);
}
/**
* ice_clean_vsi_rss_cfg - Cleanup RSS configuration for a given VSI
* @vsi: pointer to the VSI structure
*
* Cleanup the advanced RSS configuration for a given VSI. This is necessary
* during driver removal to ensure that all RSS resources are properly
* released.
*
* @remark this function doesn't report an error as it is expected to be
* called during driver reset and unload, and there isn't much the driver can
* do if freeing RSS resources fails.
*/
static void
ice_clean_vsi_rss_cfg(struct ice_vsi *vsi)
{
struct ice_softc *sc = vsi->sc;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
status = ice_rem_vsi_rss_cfg(hw, vsi->idx);
if (status)
device_printf(dev,
"Failed to remove RSS configuration for VSI %d, err %s\n",
vsi->idx, ice_status_str(status));
/* Remove this VSI from the RSS list */
ice_rem_vsi_rss_list(hw, vsi->idx);
}
/**
* ice_clean_all_vsi_rss_cfg - Cleanup RSS configuration for all VSIs
* @sc: the device softc pointer
*
* Cleanup the advanced RSS configuration for all VSIs on a given PF
* interface.
*
* @remark This should be called while preparing for a reset, to cleanup stale
* RSS configuration for all VSIs.
*/
void
ice_clean_all_vsi_rss_cfg(struct ice_softc *sc)
{
int i;
/* No need to cleanup if RSS is not enabled */
if (!ice_is_bit_set(sc->feat_en, ICE_FEATURE_RSS))
return;
for (i = 0; i < sc->num_available_vsi; i++) {
struct ice_vsi *vsi = sc->all_vsi[i];
if (vsi)
ice_clean_vsi_rss_cfg(vsi);
}
}
/**
* ice_requested_fec_mode - Return the requested FEC mode as a string
* @pi: The port info structure
*
* Return a string representing the requested FEC mode.
*/
static const char *
ice_requested_fec_mode(struct ice_port_info *pi)
{
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
enum ice_status status;
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG,
&pcaps, NULL);
if (status)
/* Just report unknown if we can't get capabilities */
return "Unknown";
/* Check if RS-FEC has been requested first */
if (pcaps.link_fec_options & (ICE_AQC_PHY_FEC_25G_RS_528_REQ |
ICE_AQC_PHY_FEC_25G_RS_544_REQ))
return ice_fec_str(ICE_FEC_RS);
/* If RS FEC has not been requested, then check BASE-R */
if (pcaps.link_fec_options & (ICE_AQC_PHY_FEC_10G_KR_40G_KR4_REQ |
ICE_AQC_PHY_FEC_25G_KR_REQ))
return ice_fec_str(ICE_FEC_BASER);
return ice_fec_str(ICE_FEC_NONE);
}
/**
* ice_negotiated_fec_mode - Return the negotiated FEC mode as a string
* @pi: The port info structure
*
* Return a string representing the current FEC mode.
*/
static const char *
ice_negotiated_fec_mode(struct ice_port_info *pi)
{
/* First, check if RS has been requested first */
if (pi->phy.link_info.fec_info & (ICE_AQ_LINK_25G_RS_528_FEC_EN |
ICE_AQ_LINK_25G_RS_544_FEC_EN))
return ice_fec_str(ICE_FEC_RS);
/* If RS FEC has not been requested, then check BASE-R */
if (pi->phy.link_info.fec_info & ICE_AQ_LINK_25G_KR_FEC_EN)
return ice_fec_str(ICE_FEC_BASER);
return ice_fec_str(ICE_FEC_NONE);
}
/**
* ice_autoneg_mode - Return string indicating of autoneg completed
* @pi: The port info structure
*
* Return "True" if autonegotiation is completed, "False" otherwise.
*/
static const char *
ice_autoneg_mode(struct ice_port_info *pi)
{
if (pi->phy.link_info.an_info & ICE_AQ_AN_COMPLETED)
return "True";
else
return "False";
}
/**
* ice_flowcontrol_mode - Return string indicating the Flow Control mode
* @pi: The port info structure
*
* Returns the current Flow Control mode as a string.
*/
static const char *
ice_flowcontrol_mode(struct ice_port_info *pi)
{
return ice_fc_str(pi->fc.current_mode);
}
/**
* ice_link_up_msg - Log a link up message with associated info
* @sc: the device private softc
*
* Log a link up message with LOG_NOTICE message level. Include information
* about the duplex, FEC mode, autonegotiation and flow control.
*/
void
ice_link_up_msg(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
struct ifnet *ifp = sc->ifp;
const char *speed, *req_fec, *neg_fec, *autoneg, *flowcontrol;
speed = ice_aq_speed_to_str(hw->port_info);
req_fec = ice_requested_fec_mode(hw->port_info);
neg_fec = ice_negotiated_fec_mode(hw->port_info);
autoneg = ice_autoneg_mode(hw->port_info);
flowcontrol = ice_flowcontrol_mode(hw->port_info);
log(LOG_NOTICE, "%s: Link is up, %s Full Duplex, Requested FEC: %s, Negotiated FEC: %s, Autoneg: %s, Flow Control: %s\n",
ifp->if_xname, speed, req_fec, neg_fec, autoneg, flowcontrol);
}
/**
* ice_update_laa_mac - Update MAC address if Locally Administered
* @sc: the device softc
*
* Update the device MAC address when a Locally Administered Address is
* assigned.
*
* This function does *not* update the MAC filter list itself. Instead, it
* should be called after ice_rm_pf_default_mac_filters, so that the previous
* address filter will be removed, and before ice_cfg_pf_default_mac_filters,
* so that the new address filter will be assigned.
*/
int
ice_update_laa_mac(struct ice_softc *sc)
{
const u8 *lladdr = (const u8 *)IF_LLADDR(sc->ifp);
struct ice_hw *hw = &sc->hw;
enum ice_status status;
/* If the address is the same, then there is nothing to update */
if (!memcmp(lladdr, hw->port_info->mac.lan_addr, ETHER_ADDR_LEN))
return (0);
/* Reject Multicast addresses */
if (ETHER_IS_MULTICAST(lladdr))
return (EINVAL);
status = ice_aq_manage_mac_write(hw, lladdr, ICE_AQC_MAN_MAC_UPDATE_LAA_WOL, NULL);
if (status) {
device_printf(sc->dev, "Failed to write mac %6D to firmware, err %s aq_err %s\n",
lladdr, ":", ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return (EFAULT);
}
/* Copy the address into place of the LAN address. */
bcopy(lladdr, hw->port_info->mac.lan_addr, ETHER_ADDR_LEN);
return (0);
}
/**
* ice_get_and_print_bus_info - Save (PCI) bus info and print messages
* @sc: device softc
*
* This will potentially print out a warning message if bus bandwidth
* is insufficient for full-speed operation.
*
* This should only be called once, during the attach process, after
* hw->port_info has been filled out with port link topology information
* (from the Get PHY Capabilities Admin Queue command).
*/
void
ice_get_and_print_bus_info(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
u16 pci_link_status;
int offset;
pci_find_cap(dev, PCIY_EXPRESS, &offset);
pci_link_status = pci_read_config(dev, offset + PCIER_LINK_STA, 2);
/* Fill out hw struct with PCIE link status info */
ice_set_pci_link_status_data(hw, pci_link_status);
/* Use info to print out bandwidth messages */
ice_print_bus_link_data(dev, hw);
if (ice_pcie_bandwidth_check(sc)) {
device_printf(dev,
"PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
device_printf(dev,
"Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
}
}
/**
* ice_pcie_bus_speed_to_rate - Convert driver bus speed enum value to
* a 64-bit baudrate.
* @speed: enum value to convert
*
* This only goes up to PCIE Gen 4.
*/
static uint64_t
ice_pcie_bus_speed_to_rate(enum ice_pcie_bus_speed speed)
{
/* If the PCI-E speed is Gen1 or Gen2, then report
* only 80% of bus speed to account for encoding overhead.
*/
switch (speed) {
case ice_pcie_speed_2_5GT:
return IF_Gbps(2);
case ice_pcie_speed_5_0GT:
return IF_Gbps(4);
case ice_pcie_speed_8_0GT:
return IF_Gbps(8);
case ice_pcie_speed_16_0GT:
return IF_Gbps(16);
case ice_pcie_speed_unknown:
default:
return 0;
}
}
/**
* ice_pcie_lnk_width_to_int - Convert driver pci-e width enum value to
* a 32-bit number.
* @width: enum value to convert
*/
static int
ice_pcie_lnk_width_to_int(enum ice_pcie_link_width width)
{
switch (width) {
case ice_pcie_lnk_x1:
return (1);
case ice_pcie_lnk_x2:
return (2);
case ice_pcie_lnk_x4:
return (4);
case ice_pcie_lnk_x8:
return (8);
case ice_pcie_lnk_x12:
return (12);
case ice_pcie_lnk_x16:
return (16);
case ice_pcie_lnk_x32:
return (32);
case ice_pcie_lnk_width_resrv:
case ice_pcie_lnk_width_unknown:
default:
return (0);
}
}
/**
* ice_pcie_bandwidth_check - Check if PCI-E bandwidth is sufficient for
* full-speed device operation.
* @sc: adapter softc
*
* Returns 0 if sufficient; 1 if not.
*/
static uint8_t
ice_pcie_bandwidth_check(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
int num_ports, pcie_width;
u64 pcie_speed, port_speed;
MPASS(hw->port_info);
num_ports = bitcount32(hw->func_caps.common_cap.valid_functions);
port_speed = ice_phy_types_to_max_rate(hw->port_info);
pcie_speed = ice_pcie_bus_speed_to_rate(hw->bus.speed);
pcie_width = ice_pcie_lnk_width_to_int(hw->bus.width);
/*
* If 2x100, clamp ports to 1 -- 2nd port is intended for
* failover.
*/
if (port_speed == IF_Gbps(100))
num_ports = 1;
return !!((num_ports * port_speed) > pcie_speed * pcie_width);
}
/**
* ice_print_bus_link_data - Print PCI-E bandwidth information
* @dev: device to print string for
* @hw: hw struct with PCI-e link information
*/
static void
ice_print_bus_link_data(device_t dev, struct ice_hw *hw)
{
device_printf(dev, "PCI Express Bus: Speed %s %s\n",
((hw->bus.speed == ice_pcie_speed_16_0GT) ? "16.0GT/s" :
(hw->bus.speed == ice_pcie_speed_8_0GT) ? "8.0GT/s" :
(hw->bus.speed == ice_pcie_speed_5_0GT) ? "5.0GT/s" :
(hw->bus.speed == ice_pcie_speed_2_5GT) ? "2.5GT/s" : "Unknown"),
(hw->bus.width == ice_pcie_lnk_x32) ? "Width x32" :
(hw->bus.width == ice_pcie_lnk_x16) ? "Width x16" :
(hw->bus.width == ice_pcie_lnk_x12) ? "Width x12" :
(hw->bus.width == ice_pcie_lnk_x8) ? "Width x8" :
(hw->bus.width == ice_pcie_lnk_x4) ? "Width x4" :
(hw->bus.width == ice_pcie_lnk_x2) ? "Width x2" :
(hw->bus.width == ice_pcie_lnk_x1) ? "Width x1" : "Width Unknown");
}
/**
* ice_set_pci_link_status_data - store PCI bus info
* @hw: pointer to hardware structure
* @link_status: the link status word from PCI config space
*
* Stores the PCI bus info (speed, width, type) within the ice_hw structure
**/
static void
ice_set_pci_link_status_data(struct ice_hw *hw, u16 link_status)
{
u16 reg;
hw->bus.type = ice_bus_pci_express;
reg = (link_status & PCIEM_LINK_STA_WIDTH) >> 4;
switch (reg) {
case ice_pcie_lnk_x1:
case ice_pcie_lnk_x2:
case ice_pcie_lnk_x4:
case ice_pcie_lnk_x8:
case ice_pcie_lnk_x12:
case ice_pcie_lnk_x16:
case ice_pcie_lnk_x32:
hw->bus.width = (enum ice_pcie_link_width)reg;
break;
default:
hw->bus.width = ice_pcie_lnk_width_unknown;
break;
}
reg = (link_status & PCIEM_LINK_STA_SPEED) + 0x13;
switch (reg) {
case ice_pcie_speed_2_5GT:
case ice_pcie_speed_5_0GT:
case ice_pcie_speed_8_0GT:
case ice_pcie_speed_16_0GT:
hw->bus.speed = (enum ice_pcie_bus_speed)reg;
break;
default:
hw->bus.speed = ice_pcie_speed_unknown;
break;
}
}
/**
* ice_init_link_events - Initialize Link Status Events mask
* @sc: the device softc
*
* Initialize the Link Status Events mask to disable notification of link
* events we don't care about in software. Also request that link status
* events be enabled.
*/
int
ice_init_link_events(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
enum ice_status status;
u16 wanted_events;
/* Set the bits for the events that we want to be notified by */
wanted_events = (ICE_AQ_LINK_EVENT_UPDOWN |
ICE_AQ_LINK_EVENT_MEDIA_NA |
ICE_AQ_LINK_EVENT_MODULE_QUAL_FAIL);
/* request that every event except the wanted events be masked */
status = ice_aq_set_event_mask(hw, hw->port_info->lport, ~wanted_events, NULL);
if (status) {
device_printf(sc->dev,
"Failed to set link status event mask, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
/* Request link info with the LSE bit set to enable link status events */
status = ice_aq_get_link_info(hw->port_info, true, NULL, NULL);
if (status) {
device_printf(sc->dev,
"Failed to enable link status events, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
return (0);
}
/**
* ice_handle_mdd_event - Handle possibly malicious events
* @sc: the device softc
*
* Called by the admin task if an MDD detection interrupt is triggered.
* Identifies possibly malicious events coming from VFs. Also triggers for
* similar incorrect behavior from the PF as well.
*/
void
ice_handle_mdd_event(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
bool mdd_detected = false, request_reinit = false;
device_t dev = sc->dev;
u32 reg;
if (!ice_testandclear_state(&sc->state, ICE_STATE_MDD_PENDING))
return;
reg = rd32(hw, GL_MDET_TX_TCLAN);
if (reg & GL_MDET_TX_TCLAN_VALID_M) {
u8 pf_num = (reg & GL_MDET_TX_TCLAN_PF_NUM_M) >> GL_MDET_TX_TCLAN_PF_NUM_S;
u16 vf_num = (reg & GL_MDET_TX_TCLAN_VF_NUM_M) >> GL_MDET_TX_TCLAN_VF_NUM_S;
u8 event = (reg & GL_MDET_TX_TCLAN_MAL_TYPE_M) >> GL_MDET_TX_TCLAN_MAL_TYPE_S;
u16 queue = (reg & GL_MDET_TX_TCLAN_QNUM_M) >> GL_MDET_TX_TCLAN_QNUM_S;
device_printf(dev, "Malicious Driver Detection Tx Descriptor check event '%s' on Tx queue %u PF# %u VF# %u\n",
ice_mdd_tx_tclan_str(event), queue, pf_num, vf_num);
/* Only clear this event if it matches this PF, that way other
* PFs can read the event and determine VF and queue number.
*/
if (pf_num == hw->pf_id)
wr32(hw, GL_MDET_TX_TCLAN, 0xffffffff);
mdd_detected = true;
}
/* Determine what triggered the MDD event */
reg = rd32(hw, GL_MDET_TX_PQM);
if (reg & GL_MDET_TX_PQM_VALID_M) {
u8 pf_num = (reg & GL_MDET_TX_PQM_PF_NUM_M) >> GL_MDET_TX_PQM_PF_NUM_S;
u16 vf_num = (reg & GL_MDET_TX_PQM_VF_NUM_M) >> GL_MDET_TX_PQM_VF_NUM_S;
u8 event = (reg & GL_MDET_TX_PQM_MAL_TYPE_M) >> GL_MDET_TX_PQM_MAL_TYPE_S;
u16 queue = (reg & GL_MDET_TX_PQM_QNUM_M) >> GL_MDET_TX_PQM_QNUM_S;
device_printf(dev, "Malicious Driver Detection Tx Quanta check event '%s' on Tx queue %u PF# %u VF# %u\n",
ice_mdd_tx_pqm_str(event), queue, pf_num, vf_num);
/* Only clear this event if it matches this PF, that way other
* PFs can read the event and determine VF and queue number.
*/
if (pf_num == hw->pf_id)
wr32(hw, GL_MDET_TX_PQM, 0xffffffff);
mdd_detected = true;
}
reg = rd32(hw, GL_MDET_RX);
if (reg & GL_MDET_RX_VALID_M) {
u8 pf_num = (reg & GL_MDET_RX_PF_NUM_M) >> GL_MDET_RX_PF_NUM_S;
u16 vf_num = (reg & GL_MDET_RX_VF_NUM_M) >> GL_MDET_RX_VF_NUM_S;
u8 event = (reg & GL_MDET_RX_MAL_TYPE_M) >> GL_MDET_RX_MAL_TYPE_S;
u16 queue = (reg & GL_MDET_RX_QNUM_M) >> GL_MDET_RX_QNUM_S;
device_printf(dev, "Malicious Driver Detection Rx event '%s' on Rx queue %u PF# %u VF# %u\n",
ice_mdd_rx_str(event), queue, pf_num, vf_num);
/* Only clear this event if it matches this PF, that way other
* PFs can read the event and determine VF and queue number.
*/
if (pf_num == hw->pf_id)
wr32(hw, GL_MDET_RX, 0xffffffff);
mdd_detected = true;
}
/* Now, confirm that this event actually affects this PF, by checking
* the PF registers.
*/
if (mdd_detected) {
reg = rd32(hw, PF_MDET_TX_TCLAN);
if (reg & PF_MDET_TX_TCLAN_VALID_M) {
wr32(hw, PF_MDET_TX_TCLAN, 0xffff);
sc->soft_stats.tx_mdd_count++;
request_reinit = true;
}
reg = rd32(hw, PF_MDET_TX_PQM);
if (reg & PF_MDET_TX_PQM_VALID_M) {
wr32(hw, PF_MDET_TX_PQM, 0xffff);
sc->soft_stats.tx_mdd_count++;
request_reinit = true;
}
reg = rd32(hw, PF_MDET_RX);
if (reg & PF_MDET_RX_VALID_M) {
wr32(hw, PF_MDET_RX, 0xffff);
sc->soft_stats.rx_mdd_count++;
request_reinit = true;
}
}
/* TODO: Implement logic to detect and handle events caused by VFs. */
/* request that the upper stack re-initialize the Tx/Rx queues */
if (request_reinit)
ice_request_stack_reinit(sc);
ice_flush(hw);
}
/**
* ice_init_dcb_setup - Initialize DCB settings for HW
* @sc: the device softc
*
* This needs to be called after the fw_lldp_agent sysctl is added, since that
* can update the device's LLDP agent status if a tunable value is set.
*
* Get and store the initial state of DCB settings on driver load. Print out
* informational messages as well.
*/
void
ice_init_dcb_setup(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
bool dcbx_agent_status;
enum ice_status status;
/* Don't do anything if DCB isn't supported */
if (!hw->func_caps.common_cap.dcb) {
device_printf(dev, "%s: No DCB support\n",
__func__);
return;
}
hw->port_info->qos_cfg.dcbx_status = ice_get_dcbx_status(hw);
if (hw->port_info->qos_cfg.dcbx_status != ICE_DCBX_STATUS_DONE &&
hw->port_info->qos_cfg.dcbx_status != ICE_DCBX_STATUS_IN_PROGRESS) {
/*
* Start DCBX agent, but not LLDP. The return value isn't
* checked here because a more detailed dcbx agent status is
* retrieved and checked in ice_init_dcb() and below.
*/
ice_aq_start_stop_dcbx(hw, true, &dcbx_agent_status, NULL);
}
/* This sets hw->port_info->qos_cfg.is_sw_lldp */
status = ice_init_dcb(hw, true);
/* If there is an error, then FW LLDP is not in a usable state */
if (status != 0 && status != ICE_ERR_NOT_READY) {
/* Don't print an error message if the return code from the AQ
* cmd performed in ice_init_dcb() is is EPERM; that means the
* FW LLDP engine is disabled, and that is a valid state.
*/
if (!(status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EPERM)) {
device_printf(dev, "DCB init failed, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
hw->port_info->qos_cfg.dcbx_status = ICE_DCBX_STATUS_NOT_STARTED;
}
switch (hw->port_info->qos_cfg.dcbx_status) {
case ICE_DCBX_STATUS_DIS:
ice_debug(hw, ICE_DBG_DCB, "DCBX disabled\n");
break;
case ICE_DCBX_STATUS_NOT_STARTED:
ice_debug(hw, ICE_DBG_DCB, "DCBX not started\n");
break;
case ICE_DCBX_STATUS_MULTIPLE_PEERS:
ice_debug(hw, ICE_DBG_DCB, "DCBX detected multiple peers\n");
break;
default:
break;
}
/* LLDP disabled in FW */
if (hw->port_info->qos_cfg.is_sw_lldp) {
ice_add_rx_lldp_filter(sc);
device_printf(dev, "Firmware LLDP agent disabled\n");
}
}
/**
* ice_handle_mib_change_event - helper function to log LLDP MIB change events
* @sc: device softc
* @event: event received on a control queue
*
* Prints out the type of an LLDP MIB change event in a DCB debug message.
*
* XXX: Should be extended to do more if the driver decides to notify other SW
* of LLDP MIB changes, or needs to extract info from the MIB.
*/
static void
ice_handle_mib_change_event(struct ice_softc *sc, struct ice_rq_event_info *event)
{
struct ice_aqc_lldp_get_mib *params =
(struct ice_aqc_lldp_get_mib *)&event->desc.params.lldp_get_mib;
u8 mib_type, bridge_type, tx_status;
/* XXX: To get the contents of the MIB that caused the event, set the
* ICE_DBG_AQ debug mask and read that output
*/
static const char* mib_type_strings[] = {
"Local MIB",
"Remote MIB",
"Reserved",
"Reserved"
};
static const char* bridge_type_strings[] = {
"Nearest Bridge",
"Non-TPMR Bridge",
"Reserved",
"Reserved"
};
static const char* tx_status_strings[] = {
"Port's TX active",
"Port's TX suspended and drained",
"Reserved",
"Port's TX suspended and srained; blocked TC pipe flushed"
};
mib_type = (params->type & ICE_AQ_LLDP_MIB_TYPE_M) >>
ICE_AQ_LLDP_MIB_TYPE_S;
bridge_type = (params->type & ICE_AQ_LLDP_BRID_TYPE_M) >>
ICE_AQ_LLDP_BRID_TYPE_S;
tx_status = (params->type & ICE_AQ_LLDP_TX_M) >>
ICE_AQ_LLDP_TX_S;
ice_debug(&sc->hw, ICE_DBG_DCB, "LLDP MIB Change Event (%s, %s, %s)\n",
mib_type_strings[mib_type], bridge_type_strings[bridge_type],
tx_status_strings[tx_status]);
}
/**
* ice_send_version - Send driver version to firmware
* @sc: the device private softc
*
* Send the driver version to the firmware. This must be called as early as
* possible after ice_init_hw().
*/
int
ice_send_version(struct ice_softc *sc)
{
struct ice_driver_ver driver_version = {0};
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
driver_version.major_ver = ice_major_version;
driver_version.minor_ver = ice_minor_version;
driver_version.build_ver = ice_patch_version;
driver_version.subbuild_ver = ice_rc_version;
strlcpy((char *)driver_version.driver_string, ice_driver_version,
sizeof(driver_version.driver_string));
status = ice_aq_send_driver_ver(hw, &driver_version, NULL);
if (status) {
device_printf(dev, "Unable to send driver version to firmware, err %s aq_err %s\n",
ice_status_str(status), ice_aq_str(hw->adminq.sq_last_status));
return (EIO);
}
return (0);
}
/**
* ice_handle_lan_overflow_event - helper function to log LAN overflow events
* @sc: device softc
* @event: event received on a control queue
*
* Prints out a message when a LAN overflow event is detected on a receive
* queue.
*/
static void
ice_handle_lan_overflow_event(struct ice_softc *sc, struct ice_rq_event_info *event)
{
struct ice_aqc_event_lan_overflow *params =
(struct ice_aqc_event_lan_overflow *)&event->desc.params.lan_overflow;
struct ice_hw *hw = &sc->hw;
ice_debug(hw, ICE_DBG_DCB, "LAN overflow event detected, prtdcb_ruptq=0x%08x, qtx_ctl=0x%08x\n",
LE32_TO_CPU(params->prtdcb_ruptq),
LE32_TO_CPU(params->qtx_ctl));
}
/**
* ice_add_ethertype_to_list - Add an Ethertype filter to a filter list
* @vsi: the VSI to target packets to
* @list: the list to add the filter to
* @ethertype: the Ethertype to filter on
* @direction: The direction of the filter (Tx or Rx)
* @action: the action to take
*
* Add an Ethertype filter to a filter list. Used to forward a series of
* filters to the firmware for configuring the switch.
*
* Returns 0 on success, and an error code on failure.
*/
static int
ice_add_ethertype_to_list(struct ice_vsi *vsi, struct ice_list_head *list,
u16 ethertype, u16 direction,
enum ice_sw_fwd_act_type action)
{
struct ice_fltr_list_entry *entry;
MPASS((direction == ICE_FLTR_TX) || (direction == ICE_FLTR_RX));
entry = (__typeof(entry))malloc(sizeof(*entry), M_ICE, M_NOWAIT|M_ZERO);
if (!entry)
return (ENOMEM);
entry->fltr_info.flag = direction;
entry->fltr_info.src_id = ICE_SRC_ID_VSI;
entry->fltr_info.lkup_type = ICE_SW_LKUP_ETHERTYPE;
entry->fltr_info.fltr_act = action;
entry->fltr_info.vsi_handle = vsi->idx;
entry->fltr_info.l_data.ethertype_mac.ethertype = ethertype;
LIST_ADD(&entry->list_entry, list);
return 0;
}
#define ETHERTYPE_PAUSE_FRAMES 0x8808
#define ETHERTYPE_LLDP_FRAMES 0x88cc
/**
* ice_cfg_pf_ethertype_filters - Configure switch to drop ethertypes
* @sc: the device private softc
*
* Configure the switch to drop PAUSE frames and LLDP frames transmitted from
* the host. This prevents malicious VFs from sending these frames and being
* able to control or configure the network.
*/
int
ice_cfg_pf_ethertype_filters(struct ice_softc *sc)
{
struct ice_list_head ethertype_list;
struct ice_vsi *vsi = &sc->pf_vsi;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int err = 0;
INIT_LIST_HEAD(&ethertype_list);
/*
* Note that the switch filters will ignore the VSI index for the drop
* action, so we only need to program drop filters once for the main
* VSI.
*/
/* Configure switch to drop all Tx pause frames coming from any VSI. */
if (sc->enable_tx_fc_filter) {
err = ice_add_ethertype_to_list(vsi, &ethertype_list,
ETHERTYPE_PAUSE_FRAMES,
ICE_FLTR_TX, ICE_DROP_PACKET);
if (err)
goto free_ethertype_list;
}
/* Configure switch to drop LLDP frames coming from any VSI */
if (sc->enable_tx_lldp_filter) {
err = ice_add_ethertype_to_list(vsi, &ethertype_list,
ETHERTYPE_LLDP_FRAMES,
ICE_FLTR_TX, ICE_DROP_PACKET);
if (err)
goto free_ethertype_list;
}
status = ice_add_eth_mac(hw, &ethertype_list);
if (status) {
device_printf(dev,
"Failed to add Tx Ethertype filters, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
err = (EIO);
}
free_ethertype_list:
ice_free_fltr_list(&ethertype_list);
return err;
}
/**
* ice_add_rx_lldp_filter - add ethertype filter for Rx LLDP frames
* @sc: the device private structure
*
* Add a switch ethertype filter which forwards the LLDP frames to the main PF
* VSI. Called when the fw_lldp_agent is disabled, to allow the LLDP frames to
* be forwarded to the stack.
*/
static void
ice_add_rx_lldp_filter(struct ice_softc *sc)
{
struct ice_list_head ethertype_list;
struct ice_vsi *vsi = &sc->pf_vsi;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int err;
u16 vsi_num;
/*
* If FW is new enough, use a direct AQ command to perform the filter
* addition.
*/
if (ice_fw_supports_lldp_fltr_ctrl(hw)) {
vsi_num = ice_get_hw_vsi_num(hw, vsi->idx);
status = ice_lldp_fltr_add_remove(hw, vsi_num, true);
if (status) {
device_printf(dev,
"Failed to add Rx LLDP filter, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
} else
ice_set_state(&sc->state,
ICE_STATE_LLDP_RX_FLTR_FROM_DRIVER);
return;
}
INIT_LIST_HEAD(&ethertype_list);
/* Forward Rx LLDP frames to the stack */
err = ice_add_ethertype_to_list(vsi, &ethertype_list,
ETHERTYPE_LLDP_FRAMES,
ICE_FLTR_RX, ICE_FWD_TO_VSI);
if (err) {
device_printf(dev,
"Failed to add Rx LLDP filter, err %s\n",
ice_err_str(err));
goto free_ethertype_list;
}
status = ice_add_eth_mac(hw, &ethertype_list);
if (status && status != ICE_ERR_ALREADY_EXISTS) {
device_printf(dev,
"Failed to add Rx LLDP filter, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
} else {
/*
* If status == ICE_ERR_ALREADY_EXISTS, we won't treat an
* already existing filter as an error case.
*/
ice_set_state(&sc->state, ICE_STATE_LLDP_RX_FLTR_FROM_DRIVER);
}
free_ethertype_list:
ice_free_fltr_list(&ethertype_list);
}
/**
* ice_del_rx_lldp_filter - Remove ethertype filter for Rx LLDP frames
* @sc: the device private structure
*
* Remove the switch filter forwarding LLDP frames to the main PF VSI, called
* when the firmware LLDP agent is enabled, to stop routing LLDP frames to the
* stack.
*/
static void
ice_del_rx_lldp_filter(struct ice_softc *sc)
{
struct ice_list_head ethertype_list;
struct ice_vsi *vsi = &sc->pf_vsi;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
int err;
u16 vsi_num;
/*
* Only in the scenario where the driver added the filter during
* this session (while the driver was loaded) would we be able to
* delete this filter.
*/
if (!ice_test_state(&sc->state, ICE_STATE_LLDP_RX_FLTR_FROM_DRIVER))
return;
/*
* If FW is new enough, use a direct AQ command to perform the filter
* removal.
*/
if (ice_fw_supports_lldp_fltr_ctrl(hw)) {
vsi_num = ice_get_hw_vsi_num(hw, vsi->idx);
status = ice_lldp_fltr_add_remove(hw, vsi_num, false);
if (status) {
device_printf(dev,
"Failed to remove Rx LLDP filter, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
return;
}
INIT_LIST_HEAD(&ethertype_list);
/* Remove filter forwarding Rx LLDP frames to the stack */
err = ice_add_ethertype_to_list(vsi, &ethertype_list,
ETHERTYPE_LLDP_FRAMES,
ICE_FLTR_RX, ICE_FWD_TO_VSI);
if (err) {
device_printf(dev,
"Failed to remove Rx LLDP filter, err %s\n",
ice_err_str(err));
goto free_ethertype_list;
}
status = ice_remove_eth_mac(hw, &ethertype_list);
if (status == ICE_ERR_DOES_NOT_EXIST) {
; /* Don't complain if we try to remove a filter that doesn't exist */
} else if (status) {
device_printf(dev,
"Failed to remove Rx LLDP filter, err %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
free_ethertype_list:
ice_free_fltr_list(&ethertype_list);
}
/**
* ice_init_link_configuration -- Setup link in different ways depending
* on whether media is available or not.
* @sc: device private structure
*
* Called at the end of the attach process to either set default link
* parameters if there is media available, or force HW link down and
* set a state bit if there is no media.
*/
void
ice_init_link_configuration(struct ice_softc *sc)
{
struct ice_port_info *pi = sc->hw.port_info;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
pi->phy.get_link_info = true;
status = ice_get_link_status(pi, &sc->link_up);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_get_link_status failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return;
}
if (pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) {
ice_clear_state(&sc->state, ICE_STATE_NO_MEDIA);
/* Apply default link settings */
ice_apply_saved_phy_cfg(sc);
} else {
/* Set link down, and poll for media available in timer. This prevents the
* driver from receiving spurious link-related events.
*/
ice_set_state(&sc->state, ICE_STATE_NO_MEDIA);
status = ice_aq_set_link_restart_an(pi, false, NULL);
if (status != ICE_SUCCESS)
device_printf(dev,
"%s: ice_aq_set_link_restart_an: status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
}
/**
* ice_apply_saved_phy_req_to_cfg -- Write saved user PHY settings to cfg data
* @pi: port info struct
* @pcaps: TOPO_CAPS capability data to use for defaults
* @cfg: new PHY config data to be modified
*
* Applies user settings for advertised speeds to the PHY type fields in the
* supplied PHY config struct. It uses the data from pcaps to check if the
* saved settings are invalid and uses the pcaps data instead if they are
* invalid.
*/
static void
ice_apply_saved_phy_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg)
{
u64 phy_low = 0, phy_high = 0;
ice_update_phy_type(&phy_low, &phy_high, pi->phy.curr_user_speed_req);
cfg->phy_type_low = pcaps->phy_type_low & htole64(phy_low);
cfg->phy_type_high = pcaps->phy_type_high & htole64(phy_high);
/* Can't use saved user speed request; use NVM default PHY capabilities */
if (!cfg->phy_type_low && !cfg->phy_type_high) {
cfg->phy_type_low = pcaps->phy_type_low;
cfg->phy_type_high = pcaps->phy_type_high;
}
}
/**
* ice_apply_saved_fec_req_to_cfg -- Write saved user FEC mode to cfg data
* @pi: port info struct
* @pcaps: TOPO_CAPS capability data to use for defaults
* @cfg: new PHY config data to be modified
*
* Applies user setting for FEC mode to PHY config struct. It uses the data
* from pcaps to check if the saved settings are invalid and uses the pcaps
* data instead if they are invalid.
*/
static void
ice_apply_saved_fec_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg)
{
ice_cfg_phy_fec(pi, cfg, pi->phy.curr_user_fec_req);
/* Can't use saved user FEC mode; use NVM default PHY capabilities */
if (cfg->link_fec_opt &&
!(cfg->link_fec_opt & pcaps->link_fec_options)) {
cfg->caps |= pcaps->caps & ICE_AQC_PHY_EN_AUTO_FEC;
cfg->link_fec_opt = pcaps->link_fec_options;
}
}
/**
* ice_apply_saved_fc_req_to_cfg -- Write saved user flow control mode to cfg data
* @pi: port info struct
* @cfg: new PHY config data to be modified
*
* Applies user setting for flow control mode to PHY config struct. There are
* no invalid flow control mode settings; if there are, then this function
* treats them like "ICE_FC_NONE".
*/
static void
ice_apply_saved_fc_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_set_phy_cfg_data *cfg)
{
cfg->caps &= ~(ICE_AQ_PHY_ENA_TX_PAUSE_ABILITY |
ICE_AQ_PHY_ENA_RX_PAUSE_ABILITY);
switch (pi->phy.curr_user_fc_req) {
case ICE_FC_FULL:
cfg->caps |= ICE_AQ_PHY_ENA_TX_PAUSE_ABILITY |
ICE_AQ_PHY_ENA_RX_PAUSE_ABILITY;
break;
case ICE_FC_RX_PAUSE:
cfg->caps |= ICE_AQ_PHY_ENA_RX_PAUSE_ABILITY;
break;
case ICE_FC_TX_PAUSE:
cfg->caps |= ICE_AQ_PHY_ENA_TX_PAUSE_ABILITY;
break;
default:
/* ICE_FC_NONE */
break;
}
}
/**
* ice_apply_saved_user_req_to_cfg -- Apply all saved user settings to AQ cfg data
* @pi: port info struct
* @pcaps: TOPO_CAPS capability data to use for defaults
* @cfg: new PHY config data to be modified
*
* Applies user settings for advertised speeds, FEC mode, and flow control
* mode to the supplied PHY config struct; it uses the data from pcaps to check
* if the saved settings are invalid and uses the pcaps data instead if they
* are invalid.
*/
static void
ice_apply_saved_user_req_to_cfg(struct ice_port_info *pi,
struct ice_aqc_get_phy_caps_data *pcaps,
struct ice_aqc_set_phy_cfg_data *cfg)
{
ice_apply_saved_phy_req_to_cfg(pi, pcaps, cfg);
ice_apply_saved_fec_req_to_cfg(pi, pcaps, cfg);
ice_apply_saved_fc_req_to_cfg(pi, cfg);
}
/**
* ice_apply_saved_phy_cfg -- Re-apply user PHY config settings
* @sc: device private structure
*
* Takes the saved user PHY config settings, overwrites the NVM
* default with them if they're valid, and uses the Set PHY Config AQ command
* to apply them.
*
* Intended for use when media is inserted.
*
* @pre Port has media available
*/
void
ice_apply_saved_phy_cfg(struct ice_softc *sc)
{
struct ice_aqc_set_phy_cfg_data cfg = { 0 };
struct ice_port_info *pi = sc->hw.port_info;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (TOPO_CAP) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return;
}
/* Setup new PHY config */
ice_copy_phy_caps_to_cfg(pi, &pcaps, &cfg);
/* Apply settings requested by user */
ice_apply_saved_user_req_to_cfg(pi, &pcaps, &cfg);
/* Enable link and re-negotiate it */
cfg.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT | ICE_AQ_PHY_ENA_LINK;
status = ice_aq_set_phy_cfg(hw, pi, &cfg, NULL);
if (status != ICE_SUCCESS) {
if ((status == ICE_ERR_AQ_ERROR) &&
(hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY))
device_printf(dev,
"%s: User PHY cfg not applied; no media in port\n",
__func__);
else
device_printf(dev,
"%s: ice_aq_set_phy_cfg failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
}
/**
* ice_print_ldo_tlv - Print out LDO TLV information
* @sc: device private structure
* @tlv: LDO TLV information from the adapter NVM
*
* Dump out the information in tlv to the kernel message buffer; intended for
* debugging purposes.
*/
static void
ice_print_ldo_tlv(struct ice_softc *sc, struct ice_link_default_override_tlv *tlv)
{
device_t dev = sc->dev;
device_printf(dev, "TLV: -options 0x%02x\n", tlv->options);
device_printf(dev, " -phy_config 0x%02x\n", tlv->phy_config);
device_printf(dev, " -fec_options 0x%02x\n", tlv->fec_options);
device_printf(dev, " -phy_high 0x%016llx\n",
(unsigned long long)tlv->phy_type_high);
device_printf(dev, " -phy_low 0x%016llx\n",
(unsigned long long)tlv->phy_type_low);
}
/**
* ice_set_link_management_mode -- Strict or lenient link management
* @sc: device private structure
*
* Some NVMs give the adapter the option to advertise a superset of link
* configurations. This checks to see if that option is enabled.
* Further, the NVM could also provide a specific set of configurations
* to try; these are cached in the driver's private structure if they
* are available.
*/
void
ice_set_link_management_mode(struct ice_softc *sc)
{
struct ice_port_info *pi = sc->hw.port_info;
device_t dev = sc->dev;
struct ice_link_default_override_tlv tlv = { 0 };
enum ice_status status;
/* Port must be in strict mode if FW version is below a certain
* version. (i.e. Don't set lenient mode features)
*/
if (!(ice_fw_supports_link_override(&sc->hw)))
return;
status = ice_get_link_default_override(&tlv, pi);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_get_link_default_override failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(sc->hw.adminq.sq_last_status));
return;
}
if (sc->hw.debug_mask & ICE_DBG_LINK)
ice_print_ldo_tlv(sc, &tlv);
/* Set lenient link mode */
if (ice_is_bit_set(sc->feat_cap, ICE_FEATURE_LENIENT_LINK_MODE) &&
(!(tlv.options & ICE_LINK_OVERRIDE_STRICT_MODE)))
ice_set_bit(ICE_FEATURE_LENIENT_LINK_MODE, sc->feat_en);
/* Default overrides only work if in lenient link mode */
if (ice_is_bit_set(sc->feat_cap, ICE_FEATURE_DEFAULT_OVERRIDE) &&
ice_is_bit_set(sc->feat_en, ICE_FEATURE_LENIENT_LINK_MODE) &&
(tlv.options & ICE_LINK_OVERRIDE_EN))
ice_set_bit(ICE_FEATURE_DEFAULT_OVERRIDE, sc->feat_en);
/* Cache the LDO TLV structure in the driver, since it won't change
* during the driver's lifetime.
*/
sc->ldo_tlv = tlv;
}
/**
* ice_init_saved_phy_cfg -- Set cached user PHY cfg settings with NVM defaults
* @sc: device private structure
*
* This should be called before the tunables for these link settings
* (e.g. advertise_speed) are added -- so that these defaults don't overwrite
* the cached values that the sysctl handlers will write.
*
* This also needs to be called before ice_init_link_configuration, to ensure
* that there are sane values that can be written if there is media available
* in the port.
*/
void
ice_init_saved_phy_cfg(struct ice_softc *sc)
{
struct ice_port_info *pi = sc->hw.port_info;
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
u64 phy_low, phy_high;
status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
&pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (TOPO_CAP) failed; status %s, aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
return;
}
phy_low = le64toh(pcaps.phy_type_low);
phy_high = le64toh(pcaps.phy_type_high);
/* Save off initial config parameters */
pi->phy.curr_user_speed_req =
ice_aq_phy_types_to_sysctl_speeds(phy_low, phy_high);
pi->phy.curr_user_fec_req = ice_caps_to_fec_mode(pcaps.caps,
pcaps.link_fec_options);
pi->phy.curr_user_fc_req = ice_caps_to_fc_mode(pcaps.caps);
}
/**
* ice_module_init - Driver callback to handle module load
*
* Callback for handling module load events. This function should initialize
* any data structures that are used for the life of the device driver.
*/
static int
ice_module_init(void)
{
return (0);
}
/**
* ice_module_exit - Driver callback to handle module exit
*
* Callback for handling module unload events. This function should release
* any resources initialized during ice_module_init.
*
* If this function returns non-zero, the module will not be unloaded. It
* should only return such a value if the module cannot be unloaded at all,
* such as due to outstanding memory references that cannot be revoked.
*/
static int
ice_module_exit(void)
{
return (0);
}
/**
* ice_module_event_handler - Callback for module events
* @mod: unused module_t parameter
* @what: the event requested
* @arg: unused event argument
*
* Callback used to handle module events from the stack. Used to allow the
* driver to define custom behavior that should happen at module load and
* unload.
*/
int
ice_module_event_handler(module_t __unused mod, int what, void __unused *arg)
{
switch (what) {
case MOD_LOAD:
return ice_module_init();
case MOD_UNLOAD:
return ice_module_exit();
default:
/* TODO: do we need to handle MOD_QUIESCE and MOD_SHUTDOWN? */
return (EOPNOTSUPP);
}
}
/**
* ice_handle_nvm_access_ioctl - Handle an NVM access ioctl request
* @sc: the device private softc
* @ifd: ifdrv ioctl request pointer
*/
int
ice_handle_nvm_access_ioctl(struct ice_softc *sc, struct ifdrv *ifd)
{
union ice_nvm_access_data *data;
struct ice_nvm_access_cmd *cmd;
size_t ifd_len = ifd->ifd_len, malloc_len;
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
enum ice_status status;
u8 *nvm_buffer;
int err;
/*
* ifioctl forwards SIOCxDRVSPEC to iflib without performing
* a privilege check. In turn, iflib forwards the ioctl to the driver
* without performing a privilege check. Perform one here to ensure
* that non-privileged threads cannot access this interface.
*/
err = priv_check(curthread, PRIV_DRIVER);
if (err)
return (err);
if (ifd_len < sizeof(struct ice_nvm_access_cmd)) {
device_printf(dev, "%s: ifdrv length is too small. Got %zu, but expected %zu\n",
__func__, ifd_len, sizeof(struct ice_nvm_access_cmd));
return (EINVAL);
}
if (ifd->ifd_data == NULL) {
device_printf(dev, "%s: ifd data buffer not present.\n",
__func__);
return (EINVAL);
}
/*
* If everything works correctly, ice_handle_nvm_access should not
* modify data past the size of the ioctl length. However, it could
* lead to memory corruption if it did. Make sure to allocate at least
* enough space for the command and data regardless. This
* ensures that any access to the data union will not access invalid
* memory.
*/
malloc_len = max(ifd_len, sizeof(*data) + sizeof(*cmd));
nvm_buffer = (u8 *)malloc(malloc_len, M_ICE, M_ZERO | M_WAITOK);
if (!nvm_buffer)
return (ENOMEM);
/* Copy the NVM access command and data in from user space */
/* coverity[tainted_data_argument] */
err = copyin(ifd->ifd_data, nvm_buffer, ifd_len);
if (err) {
device_printf(dev, "%s: Copying request from user space failed, err %s\n",
__func__, ice_err_str(err));
goto cleanup_free_nvm_buffer;
}
/*
* The NVM command structure is immediately followed by data which
* varies in size based on the command.
*/
cmd = (struct ice_nvm_access_cmd *)nvm_buffer;
data = (union ice_nvm_access_data *)(nvm_buffer + sizeof(struct ice_nvm_access_cmd));
/* Handle the NVM access request */
status = ice_handle_nvm_access(hw, cmd, data);
if (status)
ice_debug(hw, ICE_DBG_NVM,
"NVM access request failed, err %s\n",
ice_status_str(status));
/* Copy the possibly modified contents of the handled request out */
err = copyout(nvm_buffer, ifd->ifd_data, ifd_len);
if (err) {
device_printf(dev, "%s: Copying response back to user space failed, err %s\n",
__func__, ice_err_str(err));
goto cleanup_free_nvm_buffer;
}
/* Convert private status to an error code for proper ioctl response */
switch (status) {
case ICE_SUCCESS:
err = (0);
break;
case ICE_ERR_NO_MEMORY:
err = (ENOMEM);
break;
case ICE_ERR_OUT_OF_RANGE:
err = (ENOTTY);
break;
case ICE_ERR_PARAM:
default:
err = (EINVAL);
break;
}
cleanup_free_nvm_buffer:
free(nvm_buffer, M_ICE);
return err;
}
/**
* ice_read_sff_eeprom - Read data from SFF eeprom
* @sc: device softc
* @dev_addr: I2C device address (typically 0xA0 or 0xA2)
* @offset: offset into the eeprom
* @data: pointer to data buffer to store read data in
* @length: length to read; max length is 16
*
* Read from the SFF eeprom in the module for this PF's port. For more details
* on the contents of an SFF eeprom, refer to SFF-8724 (SFP), SFF-8636 (QSFP),
* and SFF-8024 (both).
*/
int
ice_read_sff_eeprom(struct ice_softc *sc, u16 dev_addr, u16 offset, u8* data, u16 length)
{
struct ice_hw *hw = &sc->hw;
int error = 0, retries = 0;
enum ice_status status;
if (length > 16)
return (EINVAL);
if (ice_test_state(&sc->state, ICE_STATE_RECOVERY_MODE))
return (ENOSYS);
if (ice_test_state(&sc->state, ICE_STATE_NO_MEDIA))
return (ENXIO);
do {
status = ice_aq_sff_eeprom(hw, 0, dev_addr,
offset, 0, 0, data, length,
false, NULL);
if (!status) {
error = 0;
break;
}
if (status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY) {
error = EBUSY;
continue;
}
if (status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EACCES) {
/* FW says I2C access isn't supported */
error = EACCES;
break;
}
if (status == ICE_ERR_AQ_ERROR &&
hw->adminq.sq_last_status == ICE_AQ_RC_EPERM) {
device_printf(sc->dev,
"%s: Module pointer location specified in command does not permit the required operation.\n",
__func__);
error = EPERM;
break;
} else {
device_printf(sc->dev,
"%s: Error reading I2C data: err %s aq_err %s\n",
__func__, ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
error = EIO;
break;
}
} while (retries++ < ICE_I2C_MAX_RETRIES);
if (error == EBUSY)
device_printf(sc->dev,
"%s: Error reading I2C data after %d retries\n",
__func__, ICE_I2C_MAX_RETRIES);
return (error);
}
/**
* ice_handle_i2c_req - Driver independent I2C request handler
* @sc: device softc
* @req: The I2C parameters to use
*
* Read from the port's I2C eeprom using the parameters from the ioctl.
*/
int
ice_handle_i2c_req(struct ice_softc *sc, struct ifi2creq *req)
{
return ice_read_sff_eeprom(sc, req->dev_addr, req->offset, req->data, req->len);
}
/**
* ice_sysctl_read_i2c_diag_data - Read some module diagnostic data via i2c
* @oidp: sysctl oid structure
* @arg1: pointer to private data structure
* @arg2: unused
* @req: sysctl request pointer
*
* Read 8 bytes of diagnostic data from the SFF eeprom in the (Q)SFP module
* inserted into the port.
*
* | SFP A2 | QSFP Lower Page
* ------------|---------|----------------
* Temperature | 96-97 | 22-23
* Vcc | 98-99 | 26-27
* TX power | 102-103 | 34-35..40-41
* RX power | 104-105 | 50-51..56-57
*/
static int
ice_sysctl_read_i2c_diag_data(SYSCTL_HANDLER_ARGS)
{
struct ice_softc *sc = (struct ice_softc *)arg1;
device_t dev = sc->dev;
struct sbuf *sbuf;
int error = 0;
u8 data[16];
UNREFERENCED_PARAMETER(arg2);
UNREFERENCED_PARAMETER(oidp);
if (ice_driver_is_detaching(sc))
return (ESHUTDOWN);
if (req->oldptr == NULL) {
error = SYSCTL_OUT(req, 0, 128);
return (error);
}
error = ice_read_sff_eeprom(sc, 0xA0, 0, data, 1);
if (error)
return (error);
/* 0x3 for SFP; 0xD/0x11 for QSFP+/QSFP28 */
if (data[0] == 0x3) {
/*
* Check for:
* - Internally calibrated data
* - Diagnostic monitoring is implemented
*/
ice_read_sff_eeprom(sc, 0xA0, 92, data, 1);
if (!(data[0] & 0x60)) {
device_printf(dev, "Module doesn't support diagnostics: 0xA0[92] = %02X\n", data[0]);
return (ENODEV);
}
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
ice_read_sff_eeprom(sc, 0xA2, 96, data, 4);
for (int i = 0; i < 4; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
ice_read_sff_eeprom(sc, 0xA2, 102, data, 4);
for (int i = 0; i < 4; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
} else if (data[0] == 0xD || data[0] == 0x11) {
/*
* QSFP+ modules are always internally calibrated, and must indicate
* what types of diagnostic monitoring are implemented
*/
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
ice_read_sff_eeprom(sc, 0xA0, 22, data, 2);
for (int i = 0; i < 2; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
ice_read_sff_eeprom(sc, 0xA0, 26, data, 2);
for (int i = 0; i < 2; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
ice_read_sff_eeprom(sc, 0xA0, 34, data, 2);
for (int i = 0; i < 2; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
ice_read_sff_eeprom(sc, 0xA0, 50, data, 2);
for (int i = 0; i < 2; i++)
sbuf_printf(sbuf, "%02X ", data[i]);
} else {
device_printf(dev, "Module is not SFP/SFP+/SFP28/QSFP+ (%02X)\n", data[0]);
return (ENODEV);
}
sbuf_finish(sbuf);
sbuf_delete(sbuf);
return (0);
}
/**
* ice_alloc_intr_tracking - Setup interrupt tracking structures
* @sc: device softc structure
*
* Sets up the resource manager for keeping track of interrupt allocations,
* and initializes the tracking maps for the PF's interrupt allocations.
*
* Unlike the scheme for queues, this is done in one step since both the
* manager and the maps both have the same lifetime.
*
* @returns 0 on success, or an error code on failure.
*/
int
ice_alloc_intr_tracking(struct ice_softc *sc)
{
struct ice_hw *hw = &sc->hw;
device_t dev = sc->dev;
int err;
/* Initialize the interrupt allocation manager */
err = ice_resmgr_init_contig_only(&sc->imgr,
hw->func_caps.common_cap.num_msix_vectors);
if (err) {
device_printf(dev, "Unable to initialize PF interrupt manager: %s\n",
ice_err_str(err));
return (err);
}
/* Allocate PF interrupt mapping storage */
if (!(sc->pf_imap =
(u16 *)malloc(sizeof(u16) * hw->func_caps.common_cap.num_msix_vectors,
M_ICE, M_NOWAIT))) {
device_printf(dev, "Unable to allocate PF imap memory\n");
err = ENOMEM;
goto free_imgr;
}
for (u32 i = 0; i < hw->func_caps.common_cap.num_msix_vectors; i++) {
sc->pf_imap[i] = ICE_INVALID_RES_IDX;
}
return (0);
free_imgr:
ice_resmgr_destroy(&sc->imgr);
return (err);
}
/**
* ice_free_intr_tracking - Free PF interrupt tracking structures
* @sc: device softc structure
*
* Frees the interrupt resource allocation manager and the PF's owned maps.
*
* VF maps are released when the owning VF's are destroyed, which should always
* happen before this function is called.
*/
void
ice_free_intr_tracking(struct ice_softc *sc)
{
if (sc->pf_imap) {
ice_resmgr_release_map(&sc->imgr, sc->pf_imap,
sc->lan_vectors);
free(sc->pf_imap, M_ICE);
sc->pf_imap = NULL;
}
ice_resmgr_destroy(&sc->imgr);
}
/**
* ice_apply_supported_speed_filter - Mask off unsupported speeds
* @phy_type_low: bit-field for the low quad word of PHY types
* @phy_type_high: bit-field for the high quad word of PHY types
*
* Given the two quad words containing the supported PHY types,
* this function will mask off the speeds that are not currently
* supported by the device.
*/
static void
ice_apply_supported_speed_filter(u64 *phy_type_low, u64 *phy_type_high)
{
u64 phylow_mask;
/* We won't offer anything lower than 1G for any part,
* but we also won't offer anything under 25G for 100G
* parts.
*/
phylow_mask = ~(ICE_PHY_TYPE_LOW_1000BASE_T - 1);
if (*phy_type_high ||
*phy_type_low & ~(ICE_PHY_TYPE_LOW_100GBASE_CR4 - 1))
phylow_mask = ~(ICE_PHY_TYPE_LOW_25GBASE_T - 1);
*phy_type_low &= phylow_mask;
}
/**
* ice_get_phy_types - Report appropriate PHY types
* @sc: device softc structure
* @phy_type_low: bit-field for the low quad word of PHY types
* @phy_type_high: bit-field for the high quad word of PHY types
*
* Populate the two quad words with bits representing the PHY types
* supported by the device. This is really just a wrapper around
* the ice_aq_get_phy_caps() that chooses the appropriate report
* mode (lenient or strict) and reports back only the relevant PHY
* types. In lenient mode the capabilities are retrieved with the
* NVM_CAP report mode, otherwise they're retrieved using the
* TOPO_CAP report mode (NVM intersected with current media).
*
* @returns 0 on success, or an error code on failure.
*/
static enum ice_status
ice_get_phy_types(struct ice_softc *sc, u64 *phy_type_low, u64 *phy_type_high)
{
struct ice_aqc_get_phy_caps_data pcaps = { 0 };
struct ice_port_info *pi = sc->hw.port_info;
device_t dev = sc->dev;
enum ice_status status;
u8 report_mode;
if (ice_is_bit_set(sc->feat_en, ICE_FEATURE_LENIENT_LINK_MODE))
report_mode = ICE_AQC_REPORT_NVM_CAP;
else
report_mode = ICE_AQC_REPORT_TOPO_CAP;
status = ice_aq_get_phy_caps(pi, false, report_mode, &pcaps, NULL);
if (status != ICE_SUCCESS) {
device_printf(dev,
"%s: ice_aq_get_phy_caps (%s) failed; status %s, aq_err %s\n",
__func__, (report_mode) ? "TOPO_CAP" : "NVM_CAP",
ice_status_str(status),
ice_aq_str(sc->hw.adminq.sq_last_status));
return (status);
}
*phy_type_low = le64toh(pcaps.phy_type_low);
*phy_type_high = le64toh(pcaps.phy_type_high);
return (ICE_SUCCESS);
}
/**
* ice_set_default_local_lldp_mib - Set Local LLDP MIB to default settings
* @sc: device softc structure
*
* This function needs to be called after link up; it makes sure the FW
* has certain PFC/DCB settings. This is intended to workaround a FW behavior
* where these settings seem to be cleared on link up.
*/
void
ice_set_default_local_lldp_mib(struct ice_softc *sc)
{
struct ice_dcbx_cfg *dcbcfg;
struct ice_hw *hw = &sc->hw;
struct ice_port_info *pi;
device_t dev = sc->dev;
enum ice_status status;
pi = hw->port_info;
dcbcfg = &pi->qos_cfg.local_dcbx_cfg;
/* This value is only 3 bits; 8 TCs maps to 0 */
u8 maxtcs = hw->func_caps.common_cap.maxtc & ICE_IEEE_ETS_MAXTC_M;
/**
* Setup the default settings used by the driver for the Set Local
* LLDP MIB Admin Queue command (0x0A08). (1TC w/ 100% BW, ETS, no
* PFC).
*/
memset(dcbcfg, 0, sizeof(*dcbcfg));
dcbcfg->etscfg.willing = 1;
dcbcfg->etscfg.tcbwtable[0] = 100;
dcbcfg->etscfg.maxtcs = maxtcs;
dcbcfg->etsrec.willing = 1;
dcbcfg->etsrec.tcbwtable[0] = 100;
dcbcfg->etsrec.maxtcs = maxtcs;
dcbcfg->pfc.willing = 1;
dcbcfg->pfc.pfccap = maxtcs;
status = ice_set_dcb_cfg(pi);
if (status)
device_printf(dev,
"Error setting Local LLDP MIB: %s aq_err %s\n",
ice_status_str(status),
ice_aq_str(hw->adminq.sq_last_status));
}
Reference in New Issue View Git Blame Copy Permalink