freebsd-dev/sys/mips/idt/uart_bus_rc32434.c
Ruslan Bukin c214a270f5 Allow setting access-width for UART registers.
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by:	kan, marcel
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D9785
2017-02-27 20:08:42 +00:00

101 lines
3.1 KiB
C

/*-
* Copyright (c) 2007 Bruce M. Simpson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* $Id$
*/
/*
* Skeleton of this file was based on respective code for ARM
* code written by Olivier Houchard.
*/
/*
* XXXMIPS: This file is hacked from arm/... . XXXMIPS here means this file is
* experimental and was written for MIPS32 port.
*/
#include "opt_uart.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <mips/idt/idtreg.h>
#include <dev/pci/pcivar.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_bus.h>
#include <dev/uart/uart_cpu.h>
#include <dev/ic/ns16550.h>
#include "uart_if.h"
static int uart_rc32434_probe(device_t dev);
extern struct uart_class uart_rc32434_uart_class;
static device_method_t uart_rc32434_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uart_rc32434_probe),
DEVMETHOD(device_attach, uart_bus_attach),
DEVMETHOD(device_detach, uart_bus_detach),
{ 0, 0 }
};
static driver_t uart_rc32434_driver = {
uart_driver_name,
uart_rc32434_methods,
sizeof(struct uart_softc),
};
extern SLIST_HEAD(uart_devinfo_list, uart_devinfo) uart_sysdevs;
static int
uart_rc32434_probe(device_t dev)
{
struct uart_softc *sc;
sc = device_get_softc(dev);
sc->sc_sysdev = SLIST_FIRST(&uart_sysdevs);
sc->sc_class = &uart_ns8250_class;
bcopy(&sc->sc_sysdev->bas, &sc->sc_bas, sizeof(sc->sc_bas));
sc->sc_sysdev->bas.regshft = 2;
sc->sc_sysdev->bas.bst = mips_bus_space_generic;
sc->sc_sysdev->bas.bsh = MIPS_PHYS_TO_KSEG1(IDT_BASE_UART0);
sc->sc_bas.regshft = 2;
sc->sc_bas.bst = mips_bus_space_generic;
sc->sc_bas.bsh = MIPS_PHYS_TO_KSEG1(IDT_BASE_UART0);
return (uart_bus_probe(dev, 2, 0, 330000000UL/2, 0, 0));
}
DRIVER_MODULE(uart, obio, uart_rc32434_driver, uart_devclass, 0, 0);