f246e4a17f
network layer (ether). - Don't abuse module names to facilitate ifconfig module loading; such abuse isn't really needed. (And if we do need type information associated with a module then we should make it explicit and not use hacks.)
1880 lines
46 KiB
C
1880 lines
46 KiB
C
/*
|
|
* Copyright (c) 2002 Myson Technology Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Written by: yen_cw@myson.com.tw available at: http://www.myson.com.tw/
|
|
*
|
|
* Myson fast ethernet PCI NIC driver
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
|
|
#define NBPFILTER 1
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/bpf.h>
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
/*
|
|
* #define MY_USEIOSPACE
|
|
*/
|
|
|
|
static int MY_USEIOSPACE = 1;
|
|
|
|
#if (MY_USEIOSPACE)
|
|
#define MY_RES SYS_RES_IOPORT
|
|
#define MY_RID MY_PCI_LOIO
|
|
#else
|
|
#define MY_RES SYS_RES_MEMORY
|
|
#define MY_RID MY_PCI_LOMEM
|
|
#endif
|
|
|
|
|
|
#include <dev/my/if_myreg.h>
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$Id: if_my.c,v 1.50 2001/12/03 04:15:33 <yen_cw@myson.com.tw> wpaul Exp $";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
struct my_type *my_info_tmp;
|
|
static struct my_type my_devs[] = {
|
|
{MYSONVENDORID, MTD800ID, "Myson MTD80X Based Fast Ethernet Card"},
|
|
{MYSONVENDORID, MTD803ID, "Myson MTD80X Based Fast Ethernet Card"},
|
|
{MYSONVENDORID, MTD891ID, "Myson MTD89X Based Giga Ethernet Card"},
|
|
{0, 0, NULL}
|
|
};
|
|
|
|
/*
|
|
* Various supported PHY vendors/types and their names. Note that this driver
|
|
* will work with pretty much any MII-compliant PHY, so failure to positively
|
|
* identify the chip is not a fatal error.
|
|
*/
|
|
static struct my_type my_phys[] = {
|
|
{MysonPHYID0, MysonPHYID0, "<MYSON MTD981>"},
|
|
{SeeqPHYID0, SeeqPHYID0, "<SEEQ 80225>"},
|
|
{AhdocPHYID0, AhdocPHYID0, "<AHDOC 101>"},
|
|
{MarvellPHYID0, MarvellPHYID0, "<MARVELL 88E1000>"},
|
|
{LevelOnePHYID0, LevelOnePHYID0, "<LevelOne LXT1000>"},
|
|
{0, 0, "<MII-compliant physical interface>"}
|
|
};
|
|
|
|
static int my_probe(device_t);
|
|
static int my_attach(device_t);
|
|
static int my_detach(device_t);
|
|
static int my_newbuf(struct my_softc *, struct my_chain_onefrag *);
|
|
static int my_encap(struct my_softc *, struct my_chain *, struct mbuf *);
|
|
static void my_rxeof(struct my_softc *);
|
|
static void my_txeof(struct my_softc *);
|
|
static void my_txeoc(struct my_softc *);
|
|
static void my_intr(void *);
|
|
static void my_start(struct ifnet *);
|
|
static int my_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void my_init(void *);
|
|
static void my_stop(struct my_softc *);
|
|
static void my_watchdog(struct ifnet *);
|
|
static void my_shutdown(device_t);
|
|
static int my_ifmedia_upd(struct ifnet *);
|
|
static void my_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
static u_int16_t my_phy_readreg(struct my_softc *, int);
|
|
static void my_phy_writereg(struct my_softc *, int, int);
|
|
static void my_autoneg_xmit(struct my_softc *);
|
|
static void my_autoneg_mii(struct my_softc *, int, int);
|
|
static void my_setmode_mii(struct my_softc *, int);
|
|
static void my_getmode_mii(struct my_softc *);
|
|
static void my_setcfg(struct my_softc *, int);
|
|
static u_int8_t my_calchash(caddr_t);
|
|
static void my_setmulti(struct my_softc *);
|
|
static void my_reset(struct my_softc *);
|
|
static int my_list_rx_init(struct my_softc *);
|
|
static int my_list_tx_init(struct my_softc *);
|
|
static long my_send_cmd_to_phy(struct my_softc *, int, int);
|
|
|
|
#define MY_SETBIT(sc, reg, x) CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
|
|
#define MY_CLRBIT(sc, reg, x) CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
|
|
|
|
static device_method_t my_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, my_probe),
|
|
DEVMETHOD(device_attach, my_attach),
|
|
DEVMETHOD(device_detach, my_detach),
|
|
DEVMETHOD(device_shutdown, my_shutdown),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t my_driver = {
|
|
"my",
|
|
my_methods,
|
|
sizeof(struct my_softc)
|
|
};
|
|
|
|
static devclass_t my_devclass;
|
|
|
|
DRIVER_MODULE(my, pci, my_driver, my_devclass, 0, 0);
|
|
MODULE_DEPEND(my, pci, 1, 1, 1);
|
|
MODULE_DEPEND(my, ether, 1, 1, 1);
|
|
|
|
static long
|
|
my_send_cmd_to_phy(struct my_softc * sc, int opcode, int regad)
|
|
{
|
|
long miir;
|
|
int i;
|
|
int mask, data;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
/* enable MII output */
|
|
miir = CSR_READ_4(sc, MY_MANAGEMENT);
|
|
miir &= 0xfffffff0;
|
|
|
|
miir |= MY_MASK_MIIR_MII_WRITE + MY_MASK_MIIR_MII_MDO;
|
|
|
|
/* send 32 1's preamble */
|
|
for (i = 0; i < 32; i++) {
|
|
/* low MDC; MDO is already high (miir) */
|
|
miir &= ~MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
|
|
/* high MDC */
|
|
miir |= MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
}
|
|
|
|
/* calculate ST+OP+PHYAD+REGAD+TA */
|
|
data = opcode | (sc->my_phy_addr << 7) | (regad << 2);
|
|
|
|
/* sent out */
|
|
mask = 0x8000;
|
|
while (mask) {
|
|
/* low MDC, prepare MDO */
|
|
miir &= ~(MY_MASK_MIIR_MII_MDC + MY_MASK_MIIR_MII_MDO);
|
|
if (mask & data)
|
|
miir |= MY_MASK_MIIR_MII_MDO;
|
|
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
/* high MDC */
|
|
miir |= MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
DELAY(30);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
if (mask == 0x2 && opcode == MY_OP_READ)
|
|
miir &= ~MY_MASK_MIIR_MII_WRITE;
|
|
}
|
|
|
|
MY_UNLOCK(sc);
|
|
return miir;
|
|
}
|
|
|
|
|
|
static u_int16_t
|
|
my_phy_readreg(struct my_softc * sc, int reg)
|
|
{
|
|
long miir;
|
|
int mask, data;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
if (sc->my_info->my_did == MTD803ID)
|
|
data = CSR_READ_2(sc, MY_PHYBASE + reg * 2);
|
|
else {
|
|
miir = my_send_cmd_to_phy(sc, MY_OP_READ, reg);
|
|
|
|
/* read data */
|
|
mask = 0x8000;
|
|
data = 0;
|
|
while (mask) {
|
|
/* low MDC */
|
|
miir &= ~MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
|
|
/* read MDI */
|
|
miir = CSR_READ_4(sc, MY_MANAGEMENT);
|
|
if (miir & MY_MASK_MIIR_MII_MDI)
|
|
data |= mask;
|
|
|
|
/* high MDC, and wait */
|
|
miir |= MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
DELAY(30);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* low MDC */
|
|
miir &= ~MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
}
|
|
|
|
MY_UNLOCK(sc);
|
|
return (u_int16_t) data;
|
|
}
|
|
|
|
|
|
static void
|
|
my_phy_writereg(struct my_softc * sc, int reg, int data)
|
|
{
|
|
long miir;
|
|
int mask;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
if (sc->my_info->my_did == MTD803ID)
|
|
CSR_WRITE_2(sc, MY_PHYBASE + reg * 2, data);
|
|
else {
|
|
miir = my_send_cmd_to_phy(sc, MY_OP_WRITE, reg);
|
|
|
|
/* write data */
|
|
mask = 0x8000;
|
|
while (mask) {
|
|
/* low MDC, prepare MDO */
|
|
miir &= ~(MY_MASK_MIIR_MII_MDC + MY_MASK_MIIR_MII_MDO);
|
|
if (mask & data)
|
|
miir |= MY_MASK_MIIR_MII_MDO;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
DELAY(1);
|
|
|
|
/* high MDC */
|
|
miir |= MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
DELAY(1);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* low MDC */
|
|
miir &= ~MY_MASK_MIIR_MII_MDC;
|
|
CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
static u_int8_t
|
|
my_calchash(caddr_t addr)
|
|
{
|
|
u_int32_t crc, carry;
|
|
int i, j;
|
|
u_int8_t c;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
c = *(addr + i);
|
|
for (j = 0; j < 8; j++) {
|
|
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
|
|
crc <<= 1;
|
|
c >>= 1;
|
|
if (carry)
|
|
crc = (crc ^ 0x04c11db6) | carry;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* return the filter bit position Note: I arrived at the following
|
|
* nonsense through experimentation. It's not the usual way to
|
|
* generate the bit position but it's the only thing I could come up
|
|
* with that works.
|
|
*/
|
|
return (~(crc >> 26) & 0x0000003F);
|
|
}
|
|
|
|
|
|
/*
|
|
* Program the 64-bit multicast hash filter.
|
|
*/
|
|
static void
|
|
my_setmulti(struct my_softc * sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
int h = 0;
|
|
u_int32_t hashes[2] = {0, 0};
|
|
struct ifmultiaddr *ifma;
|
|
u_int32_t rxfilt;
|
|
int mcnt = 0;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
rxfilt = CSR_READ_4(sc, MY_TCRRCR);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
rxfilt |= MY_AM;
|
|
CSR_WRITE_4(sc, MY_TCRRCR, rxfilt);
|
|
CSR_WRITE_4(sc, MY_MAR0, 0xFFFFFFFF);
|
|
CSR_WRITE_4(sc, MY_MAR1, 0xFFFFFFFF);
|
|
|
|
MY_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
/* first, zot all the existing hash bits */
|
|
CSR_WRITE_4(sc, MY_MAR0, 0);
|
|
CSR_WRITE_4(sc, MY_MAR1, 0);
|
|
|
|
/* now program new ones */
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = my_calchash(LLADDR((struct sockaddr_dl *) ifma->ifma_addr));
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
mcnt++;
|
|
}
|
|
|
|
if (mcnt)
|
|
rxfilt |= MY_AM;
|
|
else
|
|
rxfilt &= ~MY_AM;
|
|
CSR_WRITE_4(sc, MY_MAR0, hashes[0]);
|
|
CSR_WRITE_4(sc, MY_MAR1, hashes[1]);
|
|
CSR_WRITE_4(sc, MY_TCRRCR, rxfilt);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Initiate an autonegotiation session.
|
|
*/
|
|
static void
|
|
my_autoneg_xmit(struct my_softc * sc)
|
|
{
|
|
u_int16_t phy_sts = 0;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
my_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
|
|
DELAY(500);
|
|
while (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET);
|
|
|
|
phy_sts = my_phy_readreg(sc, PHY_BMCR);
|
|
phy_sts |= PHY_BMCR_AUTONEGENBL | PHY_BMCR_AUTONEGRSTR;
|
|
my_phy_writereg(sc, PHY_BMCR, phy_sts);
|
|
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* Invoke autonegotiation on a PHY.
|
|
*/
|
|
static void
|
|
my_autoneg_mii(struct my_softc * sc, int flag, int verbose)
|
|
{
|
|
u_int16_t phy_sts = 0, media, advert, ability;
|
|
u_int16_t ability2 = 0;
|
|
struct ifnet *ifp;
|
|
struct ifmedia *ifm;
|
|
|
|
MY_LOCK(sc);
|
|
|
|
ifm = &sc->ifmedia;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifm->ifm_media = IFM_ETHER | IFM_AUTO;
|
|
|
|
#ifndef FORCE_AUTONEG_TFOUR
|
|
/*
|
|
* First, see if autoneg is supported. If not, there's no point in
|
|
* continuing.
|
|
*/
|
|
phy_sts = my_phy_readreg(sc, PHY_BMSR);
|
|
if (!(phy_sts & PHY_BMSR_CANAUTONEG)) {
|
|
if (verbose)
|
|
printf("my%d: autonegotiation not supported\n",
|
|
sc->my_unit);
|
|
ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
switch (flag) {
|
|
case MY_FLAG_FORCEDELAY:
|
|
/*
|
|
* XXX Never use this option anywhere but in the probe
|
|
* routine: making the kernel stop dead in its tracks for
|
|
* three whole seconds after we've gone multi-user is really
|
|
* bad manners.
|
|
*/
|
|
my_autoneg_xmit(sc);
|
|
DELAY(5000000);
|
|
break;
|
|
case MY_FLAG_SCHEDDELAY:
|
|
/*
|
|
* Wait for the transmitter to go idle before starting an
|
|
* autoneg session, otherwise my_start() may clobber our
|
|
* timeout, and we don't want to allow transmission during an
|
|
* autoneg session since that can screw it up.
|
|
*/
|
|
if (sc->my_cdata.my_tx_head != NULL) {
|
|
sc->my_want_auto = 1;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
my_autoneg_xmit(sc);
|
|
ifp->if_timer = 5;
|
|
sc->my_autoneg = 1;
|
|
sc->my_want_auto = 0;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
case MY_FLAG_DELAYTIMEO:
|
|
ifp->if_timer = 0;
|
|
sc->my_autoneg = 0;
|
|
break;
|
|
default:
|
|
printf("my%d: invalid autoneg flag: %d\n", sc->my_unit, flag);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_AUTONEGCOMP) {
|
|
if (verbose)
|
|
printf("my%d: autoneg complete, ", sc->my_unit);
|
|
phy_sts = my_phy_readreg(sc, PHY_BMSR);
|
|
} else {
|
|
if (verbose)
|
|
printf("my%d: autoneg not complete, ", sc->my_unit);
|
|
}
|
|
|
|
media = my_phy_readreg(sc, PHY_BMCR);
|
|
|
|
/* Link is good. Report modes and set duplex mode. */
|
|
if (my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT) {
|
|
if (verbose)
|
|
printf("my%d: link status good. ", sc->my_unit);
|
|
advert = my_phy_readreg(sc, PHY_ANAR);
|
|
ability = my_phy_readreg(sc, PHY_LPAR);
|
|
if ((sc->my_pinfo->my_vid == MarvellPHYID0) ||
|
|
(sc->my_pinfo->my_vid == LevelOnePHYID0)) {
|
|
ability2 = my_phy_readreg(sc, PHY_1000SR);
|
|
if (ability2 & PHY_1000SR_1000BTXFULL) {
|
|
advert = 0;
|
|
ability = 0;
|
|
/*
|
|
* this version did not support 1000M,
|
|
* ifm->ifm_media =
|
|
* IFM_ETHER|IFM_1000_T|IFM_FDX;
|
|
*/
|
|
ifm->ifm_media =
|
|
IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_1000;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 1000Mbps)\n");
|
|
} else if (ability2 & PHY_1000SR_1000BTXHALF) {
|
|
advert = 0;
|
|
ability = 0;
|
|
/*
|
|
* this version did not support 1000M,
|
|
* ifm->ifm_media = IFM_ETHER|IFM_1000_T;
|
|
*/
|
|
ifm->ifm_media = IFM_ETHER | IFM_100_TX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
media |= PHY_BMCR_1000;
|
|
printf("(half-duplex, 1000Mbps)\n");
|
|
}
|
|
}
|
|
if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) {
|
|
ifm->ifm_media = IFM_ETHER | IFM_100_T4;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(100baseT4)\n");
|
|
} else if (advert & PHY_ANAR_100BTXFULL &&
|
|
ability & PHY_ANAR_100BTXFULL) {
|
|
ifm->ifm_media = IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_100BTXHALF &&
|
|
ability & PHY_ANAR_100BTXHALF) {
|
|
ifm->ifm_media = IFM_ETHER | IFM_100_TX | IFM_HDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_10BTFULL &&
|
|
ability & PHY_ANAR_10BTFULL) {
|
|
ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_FDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 10Mbps)\n");
|
|
} else if (advert) {
|
|
ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 10Mbps)\n");
|
|
}
|
|
media &= ~PHY_BMCR_AUTONEGENBL;
|
|
|
|
/* Set ASIC's duplex mode to match the PHY. */
|
|
my_phy_writereg(sc, PHY_BMCR, media);
|
|
my_setcfg(sc, media);
|
|
} else {
|
|
if (verbose)
|
|
printf("my%d: no carrier\n", sc->my_unit);
|
|
}
|
|
|
|
my_init(sc);
|
|
if (sc->my_tx_pend) {
|
|
sc->my_autoneg = 0;
|
|
sc->my_tx_pend = 0;
|
|
my_start(ifp);
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* To get PHY ability.
|
|
*/
|
|
static void
|
|
my_getmode_mii(struct my_softc * sc)
|
|
{
|
|
u_int16_t bmsr;
|
|
struct ifnet *ifp;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
bmsr = my_phy_readreg(sc, PHY_BMSR);
|
|
if (bootverbose)
|
|
printf("my%d: PHY status word: %x\n", sc->my_unit, bmsr);
|
|
|
|
/* fallback */
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
|
|
|
|
if (bmsr & PHY_BMSR_10BTHALF) {
|
|
if (bootverbose)
|
|
printf("my%d: 10Mbps half-duplex mode supported\n",
|
|
sc->my_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T | IFM_HDX,
|
|
0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T, 0, NULL);
|
|
}
|
|
if (bmsr & PHY_BMSR_10BTFULL) {
|
|
if (bootverbose)
|
|
printf("my%d: 10Mbps full-duplex mode supported\n",
|
|
sc->my_unit);
|
|
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T | IFM_FDX,
|
|
0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_10_T | IFM_FDX;
|
|
}
|
|
if (bmsr & PHY_BMSR_100BTXHALF) {
|
|
if (bootverbose)
|
|
printf("my%d: 100Mbps half-duplex mode supported\n",
|
|
sc->my_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX | IFM_HDX,
|
|
0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_TX | IFM_HDX;
|
|
}
|
|
if (bmsr & PHY_BMSR_100BTXFULL) {
|
|
if (bootverbose)
|
|
printf("my%d: 100Mbps full-duplex mode supported\n",
|
|
sc->my_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX | IFM_FDX,
|
|
0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
}
|
|
/* Some also support 100BaseT4. */
|
|
if (bmsr & PHY_BMSR_100BT4) {
|
|
if (bootverbose)
|
|
printf("my%d: 100baseT4 mode supported\n", sc->my_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_T4, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_T4;
|
|
#ifdef FORCE_AUTONEG_TFOUR
|
|
if (bootverbose)
|
|
printf("my%d: forcing on autoneg support for BT4\n",
|
|
sc->my_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_AUTO, 0 NULL):
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_AUTO;
|
|
#endif
|
|
}
|
|
#if 0 /* this version did not support 1000M, */
|
|
if (sc->my_pinfo->my_vid == MarvellPHYID0) {
|
|
if (bootverbose)
|
|
printf("my%d: 1000Mbps half-duplex mode supported\n",
|
|
sc->my_unit);
|
|
|
|
ifp->if_baudrate = 1000000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T | IFM_HDX,
|
|
0, NULL);
|
|
if (bootverbose)
|
|
printf("my%d: 1000Mbps full-duplex mode supported\n",
|
|
sc->my_unit);
|
|
ifp->if_baudrate = 1000000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T | IFM_FDX,
|
|
0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_1000_T | IFM_FDX;
|
|
}
|
|
#endif
|
|
if (bmsr & PHY_BMSR_CANAUTONEG) {
|
|
if (bootverbose)
|
|
printf("my%d: autoneg supported\n", sc->my_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER | IFM_AUTO;
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set speed and duplex mode.
|
|
*/
|
|
static void
|
|
my_setmode_mii(struct my_softc * sc, int media)
|
|
{
|
|
u_int16_t bmcr;
|
|
struct ifnet *ifp;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
/*
|
|
* If an autoneg session is in progress, stop it.
|
|
*/
|
|
if (sc->my_autoneg) {
|
|
printf("my%d: canceling autoneg session\n", sc->my_unit);
|
|
ifp->if_timer = sc->my_autoneg = sc->my_want_auto = 0;
|
|
bmcr = my_phy_readreg(sc, PHY_BMCR);
|
|
bmcr &= ~PHY_BMCR_AUTONEGENBL;
|
|
my_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
}
|
|
printf("my%d: selecting MII, ", sc->my_unit);
|
|
bmcr = my_phy_readreg(sc, PHY_BMCR);
|
|
bmcr &= ~(PHY_BMCR_AUTONEGENBL | PHY_BMCR_SPEEDSEL | PHY_BMCR_1000 |
|
|
PHY_BMCR_DUPLEX | PHY_BMCR_LOOPBK);
|
|
|
|
#if 0 /* this version did not support 1000M, */
|
|
if (IFM_SUBTYPE(media) == IFM_1000_T) {
|
|
printf("1000Mbps/T4, half-duplex\n");
|
|
bmcr &= ~PHY_BMCR_SPEEDSEL;
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
bmcr |= PHY_BMCR_1000;
|
|
}
|
|
#endif
|
|
if (IFM_SUBTYPE(media) == IFM_100_T4) {
|
|
printf("100Mbps/T4, half-duplex\n");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
printf("100Mbps, ");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
}
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
printf("10Mbps, ");
|
|
bmcr &= ~PHY_BMCR_SPEEDSEL;
|
|
}
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
printf("full duplex\n");
|
|
bmcr |= PHY_BMCR_DUPLEX;
|
|
} else {
|
|
printf("half duplex\n");
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
my_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
my_setcfg(sc, bmcr);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The Myson manual states that in order to fiddle with the 'full-duplex' and
|
|
* '100Mbps' bits in the netconfig register, we first have to put the
|
|
* transmit and/or receive logic in the idle state.
|
|
*/
|
|
static void
|
|
my_setcfg(struct my_softc * sc, int bmcr)
|
|
{
|
|
int i, restart = 0;
|
|
|
|
MY_LOCK(sc);
|
|
if (CSR_READ_4(sc, MY_TCRRCR) & (MY_TE | MY_RE)) {
|
|
restart = 1;
|
|
MY_CLRBIT(sc, MY_TCRRCR, (MY_TE | MY_RE));
|
|
for (i = 0; i < MY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_4(sc, MY_TCRRCR) &
|
|
(MY_TXRUN | MY_RXRUN)))
|
|
break;
|
|
}
|
|
if (i == MY_TIMEOUT)
|
|
printf("my%d: failed to force tx and rx to idle \n",
|
|
sc->my_unit);
|
|
}
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_PS1000);
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_PS10);
|
|
if (bmcr & PHY_BMCR_1000)
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_PS1000);
|
|
else if (!(bmcr & PHY_BMCR_SPEEDSEL))
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_PS10);
|
|
if (bmcr & PHY_BMCR_DUPLEX)
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_FD);
|
|
else
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_FD);
|
|
if (restart)
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_TE | MY_RE);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
my_reset(struct my_softc * sc)
|
|
{
|
|
register int i;
|
|
|
|
MY_LOCK(sc);
|
|
MY_SETBIT(sc, MY_BCR, MY_SWR);
|
|
for (i = 0; i < MY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_4(sc, MY_BCR) & MY_SWR))
|
|
break;
|
|
}
|
|
if (i == MY_TIMEOUT)
|
|
printf("m0x%d: reset never completed!\n", sc->my_unit);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for a Myson chip. Check the PCI vendor and device IDs against our
|
|
* list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
my_probe(device_t dev)
|
|
{
|
|
struct my_type *t;
|
|
|
|
t = my_devs;
|
|
while (t->my_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->my_vid) &&
|
|
(pci_get_device(dev) == t->my_did)) {
|
|
device_set_desc(dev, t->my_name);
|
|
my_info_tmp = t;
|
|
return (0);
|
|
}
|
|
t++;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia setup and
|
|
* ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
my_attach(device_t dev)
|
|
{
|
|
int s, i;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int32_t command, iobase;
|
|
struct my_softc *sc;
|
|
struct ifnet *ifp;
|
|
int media = IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
unsigned int round;
|
|
caddr_t roundptr;
|
|
struct my_type *p;
|
|
u_int16_t phy_vid, phy_did, phy_sts = 0;
|
|
int rid, unit, error = 0;
|
|
|
|
s = splimp();
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
if (sc == NULL) {
|
|
printf("my%d: no memory for softc struct!\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
|
|
}
|
|
bzero(sc, sizeof(struct my_softc));
|
|
mtx_init(&sc->my_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF | MTX_RECURSE);
|
|
MY_LOCK(sc);
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
#if 0
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
command |= (PCIM_CMD_PORTEN | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command & 0x000000ff, 4);
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
#endif
|
|
command = pci_read_config(dev, PCIR_COMMAND, 4);
|
|
command |= (PCIM_CMD_PORTEN | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCIR_COMMAND, command & 0x000000ff, 4);
|
|
command = pci_read_config(dev, PCIR_COMMAND, 4);
|
|
|
|
if (my_info_tmp->my_did == MTD800ID) {
|
|
iobase = pci_read_config(dev, MY_PCI_LOIO, 4);
|
|
if (iobase & 0x300)
|
|
MY_USEIOSPACE = 0;
|
|
}
|
|
if (MY_USEIOSPACE) {
|
|
if (!(command & PCIM_CMD_PORTEN)) {
|
|
printf("my%d: failed to enable I/O ports!\n", unit);
|
|
free(sc, M_DEVBUF);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
#if 0
|
|
if (!pci_map_port(config_id, MY_PCI_LOIO, (u_int16_t *) & (sc->my_bhandle))) {
|
|
printf("my%d: couldn't map ports\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->my_btag = I386_BUS_SPACE_IO;
|
|
#endif
|
|
} else {
|
|
if (!(command & PCIM_CMD_MEMEN)) {
|
|
printf("my%d: failed to enable memory mapping!\n",
|
|
unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
#if 0
|
|
if (!pci_map_mem(config_id, MY_PCI_LOMEM, &vbase, &pbase)) {
|
|
printf ("my%d: couldn't map memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
sc->my_btag = I386_BUS_SPACE_MEM;
|
|
sc->my_bhandle = vbase;
|
|
#endif
|
|
}
|
|
|
|
rid = MY_RID;
|
|
sc->my_res = bus_alloc_resource(dev, MY_RES, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
|
|
if (sc->my_res == NULL) {
|
|
printf("my%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
sc->my_btag = rman_get_bustag(sc->my_res);
|
|
sc->my_bhandle = rman_get_bushandle(sc->my_res);
|
|
|
|
rid = 0;
|
|
sc->my_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->my_irq == NULL) {
|
|
printf("my%d: couldn't map interrupt\n", unit);
|
|
bus_release_resource(dev, MY_RES, MY_RID, sc->my_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
error = bus_setup_intr(dev, sc->my_irq, INTR_TYPE_NET,
|
|
my_intr, sc, &sc->my_intrhand);
|
|
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->my_irq);
|
|
bus_release_resource(dev, MY_RES, MY_RID, sc->my_res);
|
|
printf("my%d: couldn't set up irq\n", unit);
|
|
goto fail;
|
|
}
|
|
callout_handle_init(&sc->my_stat_ch);
|
|
|
|
sc->my_info = my_info_tmp;
|
|
|
|
/* Reset the adapter. */
|
|
my_reset(sc);
|
|
|
|
/*
|
|
* Get station address
|
|
*/
|
|
for (i = 0; i < ETHER_ADDR_LEN; ++i)
|
|
eaddr[i] = CSR_READ_1(sc, MY_PAR0 + i);
|
|
|
|
/*
|
|
* A Myson chip was detected. Inform the world.
|
|
*/
|
|
printf("my%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->my_unit = unit;
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
sc->my_ldata_ptr = malloc(sizeof(struct my_list_data) + 8,
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (sc->my_ldata_ptr == NULL) {
|
|
free(sc, M_DEVBUF);
|
|
printf("my%d: no memory for list buffers!\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
sc->my_ldata = (struct my_list_data *) sc->my_ldata_ptr;
|
|
round = (uintptr_t)sc->my_ldata_ptr & 0xF;
|
|
roundptr = sc->my_ldata_ptr;
|
|
for (i = 0; i < 8; i++) {
|
|
if (round % 8) {
|
|
round++;
|
|
roundptr++;
|
|
} else
|
|
break;
|
|
}
|
|
sc->my_ldata = (struct my_list_data *) roundptr;
|
|
bzero(sc->my_ldata, sizeof(struct my_list_data));
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "my";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = my_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = my_start;
|
|
ifp->if_watchdog = my_watchdog;
|
|
ifp->if_init = my_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
|
|
|
|
if (sc->my_info->my_did == MTD803ID)
|
|
sc->my_pinfo = my_phys;
|
|
else {
|
|
if (bootverbose)
|
|
printf("my%d: probing for a PHY\n", sc->my_unit);
|
|
for (i = MY_PHYADDR_MIN; i < MY_PHYADDR_MAX + 1; i++) {
|
|
if (bootverbose)
|
|
printf("my%d: checking address: %d\n",
|
|
sc->my_unit, i);
|
|
sc->my_phy_addr = i;
|
|
phy_sts = my_phy_readreg(sc, PHY_BMSR);
|
|
if ((phy_sts != 0) && (phy_sts != 0xffff))
|
|
break;
|
|
else
|
|
phy_sts = 0;
|
|
}
|
|
if (phy_sts) {
|
|
phy_vid = my_phy_readreg(sc, PHY_VENID);
|
|
phy_did = my_phy_readreg(sc, PHY_DEVID);
|
|
if (bootverbose) {
|
|
printf("my%d: found PHY at address %d, ",
|
|
sc->my_unit, sc->my_phy_addr);
|
|
printf("vendor id: %x device id: %x\n",
|
|
phy_vid, phy_did);
|
|
}
|
|
p = my_phys;
|
|
while (p->my_vid) {
|
|
if (phy_vid == p->my_vid) {
|
|
sc->my_pinfo = p;
|
|
break;
|
|
}
|
|
p++;
|
|
}
|
|
if (sc->my_pinfo == NULL)
|
|
sc->my_pinfo = &my_phys[PHY_UNKNOWN];
|
|
if (bootverbose)
|
|
printf("my%d: PHY type: %s\n",
|
|
sc->my_unit, sc->my_pinfo->my_name);
|
|
} else {
|
|
printf("my%d: MII without any phy!\n", sc->my_unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Do ifmedia setup. */
|
|
ifmedia_init(&sc->ifmedia, 0, my_ifmedia_upd, my_ifmedia_sts);
|
|
my_getmode_mii(sc);
|
|
my_autoneg_mii(sc, MY_FLAG_FORCEDELAY, 1);
|
|
media = sc->ifmedia.ifm_media;
|
|
my_stop(sc);
|
|
ifmedia_set(&sc->ifmedia, media);
|
|
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
#if 0
|
|
at_shutdown(my_shutdown, sc, SHUTDOWN_POST_SYNC);
|
|
shutdownhook_establish(my_shutdown, sc);
|
|
#endif
|
|
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
|
|
fail:
|
|
MY_UNLOCK(sc);
|
|
mtx_destroy(&sc->my_mtx);
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
my_detach(device_t dev)
|
|
{
|
|
struct my_softc *sc;
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
s = splimp();
|
|
sc = device_get_softc(dev);
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
ether_ifdetach(ifp);
|
|
my_stop(sc);
|
|
|
|
#if 0
|
|
bus_generic_detach(dev);
|
|
device_delete_child(dev, sc->rl_miibus);
|
|
#endif
|
|
|
|
bus_teardown_intr(dev, sc->my_irq, sc->my_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->my_irq);
|
|
bus_release_resource(dev, MY_RES, MY_RID, sc->my_res);
|
|
#if 0
|
|
contigfree(sc->my_cdata.my_rx_buf, MY_RXBUFLEN + 32, M_DEVBUF);
|
|
#endif
|
|
free(sc, M_DEVBUF);
|
|
MY_UNLOCK(sc);
|
|
splx(s);
|
|
mtx_destroy(&sc->my_mtx);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int
|
|
my_list_tx_init(struct my_softc * sc)
|
|
{
|
|
struct my_chain_data *cd;
|
|
struct my_list_data *ld;
|
|
int i;
|
|
|
|
MY_LOCK(sc);
|
|
cd = &sc->my_cdata;
|
|
ld = sc->my_ldata;
|
|
for (i = 0; i < MY_TX_LIST_CNT; i++) {
|
|
cd->my_tx_chain[i].my_ptr = &ld->my_tx_list[i];
|
|
if (i == (MY_TX_LIST_CNT - 1))
|
|
cd->my_tx_chain[i].my_nextdesc = &cd->my_tx_chain[0];
|
|
else
|
|
cd->my_tx_chain[i].my_nextdesc =
|
|
&cd->my_tx_chain[i + 1];
|
|
}
|
|
cd->my_tx_free = &cd->my_tx_chain[0];
|
|
cd->my_tx_tail = cd->my_tx_head = NULL;
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that we
|
|
* arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int
|
|
my_list_rx_init(struct my_softc * sc)
|
|
{
|
|
struct my_chain_data *cd;
|
|
struct my_list_data *ld;
|
|
int i;
|
|
|
|
MY_LOCK(sc);
|
|
cd = &sc->my_cdata;
|
|
ld = sc->my_ldata;
|
|
for (i = 0; i < MY_RX_LIST_CNT; i++) {
|
|
cd->my_rx_chain[i].my_ptr =
|
|
(struct my_desc *) & ld->my_rx_list[i];
|
|
if (my_newbuf(sc, &cd->my_rx_chain[i]) == ENOBUFS) {
|
|
MY_UNLOCK(sc);
|
|
return (ENOBUFS);
|
|
}
|
|
if (i == (MY_RX_LIST_CNT - 1)) {
|
|
cd->my_rx_chain[i].my_nextdesc = &cd->my_rx_chain[0];
|
|
ld->my_rx_list[i].my_next = vtophys(&ld->my_rx_list[0]);
|
|
} else {
|
|
cd->my_rx_chain[i].my_nextdesc =
|
|
&cd->my_rx_chain[i + 1];
|
|
ld->my_rx_list[i].my_next =
|
|
vtophys(&ld->my_rx_list[i + 1]);
|
|
}
|
|
}
|
|
cd->my_rx_head = &cd->my_rx_chain[0];
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
static int
|
|
my_newbuf(struct my_softc * sc, struct my_chain_onefrag * c)
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
MY_LOCK(sc);
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("my%d: no memory for rx list -- packet dropped!\n",
|
|
sc->my_unit);
|
|
MY_UNLOCK(sc);
|
|
return (ENOBUFS);
|
|
}
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("my%d: no memory for rx list -- packet dropped!\n",
|
|
sc->my_unit);
|
|
m_freem(m_new);
|
|
MY_UNLOCK(sc);
|
|
return (ENOBUFS);
|
|
}
|
|
c->my_mbuf = m_new;
|
|
c->my_ptr->my_data = vtophys(mtod(m_new, caddr_t));
|
|
c->my_ptr->my_ctl = (MCLBYTES - 1) << MY_RBSShift;
|
|
c->my_ptr->my_status = MY_OWNByNIC;
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to the higher
|
|
* level protocols.
|
|
*/
|
|
static void
|
|
my_rxeof(struct my_softc * sc)
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct my_chain_onefrag *cur_rx;
|
|
int total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
while (!((rxstat = sc->my_cdata.my_rx_head->my_ptr->my_status)
|
|
& MY_OWNByNIC)) {
|
|
cur_rx = sc->my_cdata.my_rx_head;
|
|
sc->my_cdata.my_rx_head = cur_rx->my_nextdesc;
|
|
|
|
if (rxstat & MY_ES) { /* error summary: give up this rx pkt */
|
|
ifp->if_ierrors++;
|
|
cur_rx->my_ptr->my_status = MY_OWNByNIC;
|
|
continue;
|
|
}
|
|
/* No errors; receive the packet. */
|
|
total_len = (rxstat & MY_FLNGMASK) >> MY_FLNGShift;
|
|
total_len -= ETHER_CRC_LEN;
|
|
|
|
if (total_len < MINCLSIZE) {
|
|
m = m_devget(mtod(cur_rx->my_mbuf, char *),
|
|
total_len, 0, ifp, NULL);
|
|
cur_rx->my_ptr->my_status = MY_OWNByNIC;
|
|
if (m == NULL) {
|
|
ifp->if_ierrors++;
|
|
continue;
|
|
}
|
|
} else {
|
|
m = cur_rx->my_mbuf;
|
|
/*
|
|
* Try to conjure up a new mbuf cluster. If that
|
|
* fails, it means we have an out of memory condition
|
|
* and should leave the buffer in place and continue.
|
|
* This will result in a lost packet, but there's
|
|
* little else we can do in this situation.
|
|
*/
|
|
if (my_newbuf(sc, cur_rx) == ENOBUFS) {
|
|
ifp->if_ierrors++;
|
|
cur_rx->my_ptr->my_status = MY_OWNByNIC;
|
|
continue;
|
|
}
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
}
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's a
|
|
* broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf) {
|
|
BPF_MTAP(ifp, m);
|
|
if (ifp->if_flags & IFF_PROMISC &&
|
|
(bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up the list
|
|
* buffers.
|
|
*/
|
|
static void
|
|
my_txeof(struct my_softc * sc)
|
|
{
|
|
struct my_chain *cur_tx;
|
|
struct ifnet *ifp;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
if (sc->my_cdata.my_tx_head == NULL) {
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
/*
|
|
* Go through our tx list and free mbufs for those frames that have
|
|
* been transmitted.
|
|
*/
|
|
while (sc->my_cdata.my_tx_head->my_mbuf != NULL) {
|
|
u_int32_t txstat;
|
|
|
|
cur_tx = sc->my_cdata.my_tx_head;
|
|
txstat = MY_TXSTATUS(cur_tx);
|
|
if ((txstat & MY_OWNByNIC) || txstat == MY_UNSENT)
|
|
break;
|
|
if (!(CSR_READ_4(sc, MY_TCRRCR) & MY_Enhanced)) {
|
|
if (txstat & MY_TXERR) {
|
|
ifp->if_oerrors++;
|
|
if (txstat & MY_EC) /* excessive collision */
|
|
ifp->if_collisions++;
|
|
if (txstat & MY_LC) /* late collision */
|
|
ifp->if_collisions++;
|
|
}
|
|
ifp->if_collisions += (txstat & MY_NCRMASK) >>
|
|
MY_NCRShift;
|
|
}
|
|
ifp->if_opackets++;
|
|
m_freem(cur_tx->my_mbuf);
|
|
cur_tx->my_mbuf = NULL;
|
|
if (sc->my_cdata.my_tx_head == sc->my_cdata.my_tx_tail) {
|
|
sc->my_cdata.my_tx_head = NULL;
|
|
sc->my_cdata.my_tx_tail = NULL;
|
|
break;
|
|
}
|
|
sc->my_cdata.my_tx_head = cur_tx->my_nextdesc;
|
|
}
|
|
if (CSR_READ_4(sc, MY_TCRRCR) & MY_Enhanced) {
|
|
ifp->if_collisions += (CSR_READ_4(sc, MY_TSR) & MY_NCRMask);
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* TX 'end of channel' interrupt handler.
|
|
*/
|
|
static void
|
|
my_txeoc(struct my_softc * sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
if (sc->my_cdata.my_tx_head == NULL) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
sc->my_cdata.my_tx_tail = NULL;
|
|
if (sc->my_want_auto)
|
|
my_autoneg_mii(sc, MY_FLAG_SCHEDDELAY, 1);
|
|
} else {
|
|
if (MY_TXOWN(sc->my_cdata.my_tx_head) == MY_UNSENT) {
|
|
MY_TXOWN(sc->my_cdata.my_tx_head) = MY_OWNByNIC;
|
|
ifp->if_timer = 5;
|
|
CSR_WRITE_4(sc, MY_TXPDR, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
my_intr(void *arg)
|
|
{
|
|
struct my_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
sc = arg;
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, MY_IMR, 0x00000000);
|
|
|
|
for (;;) {
|
|
status = CSR_READ_4(sc, MY_ISR);
|
|
status &= MY_INTRS;
|
|
if (status)
|
|
CSR_WRITE_4(sc, MY_ISR, status);
|
|
else
|
|
break;
|
|
|
|
if (status & MY_RI) /* receive interrupt */
|
|
my_rxeof(sc);
|
|
|
|
if ((status & MY_RBU) || (status & MY_RxErr)) {
|
|
/* rx buffer unavailable or rx error */
|
|
ifp->if_ierrors++;
|
|
#ifdef foo
|
|
my_stop(sc);
|
|
my_reset(sc);
|
|
my_init(sc);
|
|
#endif
|
|
}
|
|
if (status & MY_TI) /* tx interrupt */
|
|
my_txeof(sc);
|
|
if (status & MY_ETI) /* tx early interrupt */
|
|
my_txeof(sc);
|
|
if (status & MY_TBU) /* tx buffer unavailable */
|
|
my_txeoc(sc);
|
|
|
|
#if 0 /* 90/1/18 delete */
|
|
if (status & MY_FBE) {
|
|
my_reset(sc);
|
|
my_init(sc);
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, MY_IMR, MY_INTRS);
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
my_start(ifp);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int
|
|
my_encap(struct my_softc * sc, struct my_chain * c, struct mbuf * m_head)
|
|
{
|
|
struct my_desc *f = NULL;
|
|
int total_len;
|
|
struct mbuf *m, *m_new = NULL;
|
|
|
|
MY_LOCK(sc);
|
|
/* calculate the total tx pkt length */
|
|
total_len = 0;
|
|
for (m = m_head; m != NULL; m = m->m_next)
|
|
total_len += m->m_len;
|
|
/*
|
|
* Start packing the mbufs in this chain into the fragment pointers.
|
|
* Stop when we run out of fragments or hit the end of the mbuf
|
|
* chain.
|
|
*/
|
|
m = m_head;
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("my%d: no memory for tx list", sc->my_unit);
|
|
MY_UNLOCK(sc);
|
|
return (1);
|
|
}
|
|
if (m_head->m_pkthdr.len > MHLEN) {
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
m_freem(m_new);
|
|
printf("my%d: no memory for tx list", sc->my_unit);
|
|
MY_UNLOCK(sc);
|
|
return (1);
|
|
}
|
|
}
|
|
m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t));
|
|
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
|
|
m_freem(m_head);
|
|
m_head = m_new;
|
|
f = &c->my_ptr->my_frag[0];
|
|
f->my_status = 0;
|
|
f->my_data = vtophys(mtod(m_new, caddr_t));
|
|
total_len = m_new->m_len;
|
|
f->my_ctl = MY_TXFD | MY_TXLD | MY_CRCEnable | MY_PADEnable;
|
|
f->my_ctl |= total_len << MY_PKTShift; /* pkt size */
|
|
f->my_ctl |= total_len; /* buffer size */
|
|
/* 89/12/29 add, for mtd891 *//* [ 89? ] */
|
|
if (sc->my_info->my_did == MTD891ID)
|
|
f->my_ctl |= MY_ETIControl | MY_RetryTxLC;
|
|
c->my_mbuf = m_head;
|
|
c->my_lastdesc = 0;
|
|
MY_TXNEXT(c) = vtophys(&c->my_nextdesc->my_ptr->my_frag[0]);
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
static void
|
|
my_start(struct ifnet * ifp)
|
|
{
|
|
struct my_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
struct my_chain *cur_tx = NULL, *start_tx;
|
|
|
|
sc = ifp->if_softc;
|
|
MY_LOCK(sc);
|
|
if (sc->my_autoneg) {
|
|
sc->my_tx_pend = 1;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
/*
|
|
* Check for an available queue slot. If there are none, punt.
|
|
*/
|
|
if (sc->my_cdata.my_tx_free->my_mbuf != NULL) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
start_tx = sc->my_cdata.my_tx_free;
|
|
while (sc->my_cdata.my_tx_free->my_mbuf == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/* Pick a descriptor off the free list. */
|
|
cur_tx = sc->my_cdata.my_tx_free;
|
|
sc->my_cdata.my_tx_free = cur_tx->my_nextdesc;
|
|
|
|
/* Pack the data into the descriptor. */
|
|
my_encap(sc, cur_tx, m_head);
|
|
|
|
if (cur_tx != start_tx)
|
|
MY_TXOWN(cur_tx) = MY_OWNByNIC;
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame to
|
|
* him.
|
|
*/
|
|
BPF_MTAP(ifp, cur_tx->my_mbuf);
|
|
#endif
|
|
}
|
|
/*
|
|
* If there are no packets queued, bail.
|
|
*/
|
|
if (cur_tx == NULL) {
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
/*
|
|
* Place the request for the upload interrupt in the last descriptor
|
|
* in the chain. This way, if we're chaining several packets at once,
|
|
* we'll only get an interupt once for the whole chain rather than
|
|
* once for each packet.
|
|
*/
|
|
MY_TXCTL(cur_tx) |= MY_TXIC;
|
|
cur_tx->my_ptr->my_frag[0].my_ctl |= MY_TXIC;
|
|
sc->my_cdata.my_tx_tail = cur_tx;
|
|
if (sc->my_cdata.my_tx_head == NULL)
|
|
sc->my_cdata.my_tx_head = start_tx;
|
|
MY_TXOWN(start_tx) = MY_OWNByNIC;
|
|
CSR_WRITE_4(sc, MY_TXPDR, 0xFFFFFFFF); /* tx polling demand */
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
my_init(void *xsc)
|
|
{
|
|
struct my_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int s;
|
|
u_int16_t phy_bmcr = 0;
|
|
|
|
MY_LOCK(sc);
|
|
if (sc->my_autoneg) {
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
s = splimp();
|
|
if (sc->my_pinfo != NULL)
|
|
phy_bmcr = my_phy_readreg(sc, PHY_BMCR);
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
my_stop(sc);
|
|
my_reset(sc);
|
|
|
|
/*
|
|
* Set cache alignment and burst length.
|
|
*/
|
|
#if 0 /* 89/9/1 modify, */
|
|
CSR_WRITE_4(sc, MY_BCR, MY_RPBLE512);
|
|
CSR_WRITE_4(sc, MY_TCRRCR, MY_TFTSF);
|
|
#endif
|
|
CSR_WRITE_4(sc, MY_BCR, MY_PBL8);
|
|
CSR_WRITE_4(sc, MY_TCRRCR, MY_TFTSF | MY_RBLEN | MY_RPBLE512);
|
|
/*
|
|
* 89/12/29 add, for mtd891,
|
|
*/
|
|
if (sc->my_info->my_did == MTD891ID) {
|
|
MY_SETBIT(sc, MY_BCR, MY_PROG);
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_Enhanced);
|
|
}
|
|
my_setcfg(sc, phy_bmcr);
|
|
/* Init circular RX list. */
|
|
if (my_list_rx_init(sc) == ENOBUFS) {
|
|
printf("my%d: init failed: no memory for rx buffers\n",
|
|
sc->my_unit);
|
|
my_stop(sc);
|
|
(void)splx(s);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
/* Init TX descriptors. */
|
|
my_list_tx_init(sc);
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_PROM);
|
|
else
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_PROM);
|
|
|
|
/*
|
|
* Set capture broadcast bit to capture broadcast frames.
|
|
*/
|
|
if (ifp->if_flags & IFF_BROADCAST)
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_AB);
|
|
else
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_AB);
|
|
|
|
/*
|
|
* Program the multicast filter, if necessary.
|
|
*/
|
|
my_setmulti(sc);
|
|
|
|
/*
|
|
* Load the address of the RX list.
|
|
*/
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_RE);
|
|
CSR_WRITE_4(sc, MY_RXLBA, vtophys(&sc->my_ldata->my_rx_list[0]));
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, MY_IMR, MY_INTRS);
|
|
CSR_WRITE_4(sc, MY_ISR, 0xFFFFFFFF);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_RE);
|
|
MY_CLRBIT(sc, MY_TCRRCR, MY_TE);
|
|
CSR_WRITE_4(sc, MY_TXLBA, vtophys(&sc->my_ldata->my_tx_list[0]));
|
|
MY_SETBIT(sc, MY_TCRRCR, MY_TE);
|
|
|
|
/* Restore state of BMCR */
|
|
if (sc->my_pinfo != NULL)
|
|
my_phy_writereg(sc, PHY_BMCR, phy_bmcr);
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
(void)splx(s);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
|
|
static int
|
|
my_ifmedia_upd(struct ifnet * ifp)
|
|
{
|
|
struct my_softc *sc;
|
|
struct ifmedia *ifm;
|
|
|
|
sc = ifp->if_softc;
|
|
MY_LOCK(sc);
|
|
ifm = &sc->ifmedia;
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) {
|
|
MY_UNLOCK(sc);
|
|
return (EINVAL);
|
|
}
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO)
|
|
my_autoneg_mii(sc, MY_FLAG_SCHEDDELAY, 1);
|
|
else
|
|
my_setmode_mii(sc, ifm->ifm_media);
|
|
MY_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
|
|
static void
|
|
my_ifmedia_sts(struct ifnet * ifp, struct ifmediareq * ifmr)
|
|
{
|
|
struct my_softc *sc;
|
|
u_int16_t advert = 0, ability = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
MY_LOCK(sc);
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
if (!(my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_AUTONEGENBL)) {
|
|
#if 0 /* this version did not support 1000M, */
|
|
if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_1000)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_1000TX;
|
|
#endif
|
|
if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_SPEEDSEL)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_100_TX;
|
|
else
|
|
ifmr->ifm_active = IFM_ETHER | IFM_10_T;
|
|
if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
ability = my_phy_readreg(sc, PHY_LPAR);
|
|
advert = my_phy_readreg(sc, PHY_ANAR);
|
|
|
|
#if 0 /* this version did not support 1000M, */
|
|
if (sc->my_pinfo->my_vid = MarvellPHYID0) {
|
|
ability2 = my_phy_readreg(sc, PHY_1000SR);
|
|
if (ability2 & PHY_1000SR_1000BTXFULL) {
|
|
advert = 0;
|
|
ability = 0;
|
|
ifmr->ifm_active = IFM_ETHER|IFM_1000_T|IFM_FDX;
|
|
} else if (ability & PHY_1000SR_1000BTXHALF) {
|
|
advert = 0;
|
|
ability = 0;
|
|
ifmr->ifm_active = IFM_ETHER|IFM_1000_T|IFM_HDX;
|
|
}
|
|
}
|
|
#endif
|
|
if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_100_T4;
|
|
else if (advert & PHY_ANAR_100BTXFULL && ability & PHY_ANAR_100BTXFULL)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
else if (advert & PHY_ANAR_100BTXHALF && ability & PHY_ANAR_100BTXHALF)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_100_TX | IFM_HDX;
|
|
else if (advert & PHY_ANAR_10BTFULL && ability & PHY_ANAR_10BTFULL)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_10_T | IFM_FDX;
|
|
else if (advert & PHY_ANAR_10BTHALF && ability & PHY_ANAR_10BTHALF)
|
|
ifmr->ifm_active = IFM_ETHER | IFM_10_T | IFM_HDX;
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
my_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
|
|
{
|
|
struct my_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
MY_LOCK(sc);
|
|
switch (command) {
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP)
|
|
my_init(sc);
|
|
else if (ifp->if_flags & IFF_RUNNING)
|
|
my_stop(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
my_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
MY_UNLOCK(sc);
|
|
(void)splx(s);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
my_watchdog(struct ifnet * ifp)
|
|
{
|
|
struct my_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
MY_LOCK(sc);
|
|
if (sc->my_autoneg) {
|
|
my_autoneg_mii(sc, MY_FLAG_DELAYTIMEO, 1);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
ifp->if_oerrors++;
|
|
printf("my%d: watchdog timeout\n", sc->my_unit);
|
|
if (!(my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
|
|
printf("my%d: no carrier - transceiver cable problem?\n",
|
|
sc->my_unit);
|
|
my_stop(sc);
|
|
my_reset(sc);
|
|
my_init(sc);
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
my_start(ifp);
|
|
MY_LOCK(sc);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the RX and TX lists.
|
|
*/
|
|
static void
|
|
my_stop(struct my_softc * sc)
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
MY_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
MY_CLRBIT(sc, MY_TCRRCR, (MY_RE | MY_TE));
|
|
CSR_WRITE_4(sc, MY_IMR, 0x00000000);
|
|
CSR_WRITE_4(sc, MY_TXLBA, 0x00000000);
|
|
CSR_WRITE_4(sc, MY_RXLBA, 0x00000000);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < MY_RX_LIST_CNT; i++) {
|
|
if (sc->my_cdata.my_rx_chain[i].my_mbuf != NULL) {
|
|
m_freem(sc->my_cdata.my_rx_chain[i].my_mbuf);
|
|
sc->my_cdata.my_rx_chain[i].my_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->my_ldata->my_rx_list,
|
|
sizeof(sc->my_ldata->my_rx_list));
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < MY_TX_LIST_CNT; i++) {
|
|
if (sc->my_cdata.my_tx_chain[i].my_mbuf != NULL) {
|
|
m_freem(sc->my_cdata.my_tx_chain[i].my_mbuf);
|
|
sc->my_cdata.my_tx_chain[i].my_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->my_ldata->my_tx_list,
|
|
sizeof(sc->my_ldata->my_tx_list));
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
MY_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't get confused
|
|
* by errant DMAs when rebooting.
|
|
*/
|
|
static void
|
|
my_shutdown(device_t dev)
|
|
{
|
|
struct my_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
my_stop(sc);
|
|
return;
|
|
}
|
|
|
|
|