freebsd-dev/lib/libarchive/libarchive_internals.3

.\" Copyright (c) 2003-2007 Tim Kientzle
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd April 16, 2007
.Dt LIBARCHIVE 3
.Os
.Sh NAME
.Nm libarchive_internals
.Nd description of libarchive internal interfaces
.Sh OVERVIEW
The
.Nm libarchive
library provides a flexible interface for reading and writing
streaming archive files such as tar and cpio.
Internally, it follows a modular layered design that should
make it easy to add new archive and compression formats.
.Sh GENERAL ARCHITECTURE
Externally, libarchive exposes most operations through an
opaque, object-style interface.
The
.Xr archive_entry 1
objects store information about a single filesystem object.
The rest of the library provides facilities to write
.Xr archive_entry 1
objects to archive files,
read them from archive files,
and write them to disk.
(There are plans to add a facility to read
.Xr archive_entry 1
objects from disk as well.)
.Pp
The read and write APIs each have four layers: a public API
layer, a format layer that understands the archive file format,
a compression layer, and an I/O layer.
The I/O layer is completely exposed to clients who can replace
it entirely with their own functions.
.Pp
In order to provide as much consistency as possible for clients,
some public functions are virtualized.
Eventually, it should be possible for clients to open
an archive or disk writer, and then use a single set of
code to select and write entries, regardless of the target.
.Sh READ ARCHITECTURE
From the outside, clients use the
.Xr archive_read 3
API to manipulate an
.Nm archive
object to read entries and bodies from an archive stream.
Internally, the
.Nm archive
object is cast to an
.Nm archive_read
object, which holds all read-specific data.
The API has four layers:
The lowest layer is the I/O layer.
This layer can be overridden by clients, but most clients use
the packaged I/O callbacks provided, for example, by
.Xr archive_read_open_memory 3 ,
and
.Xr archive_read_open_fd 3 .
The compression layer calls the I/O layer to
read bytes and decompresses them for the format layer.
The format layer unpacks a stream of uncompressed bytes and
creates
.Nm archive_entry
objects from the incoming data.
The API layer tracks overall state
(for example, it prevents clients from reading data before reading a header)
and invokes the format and compression layer operations
through registered function pointers.
In particular, the API layer drives the format-detection process:
When opening the archive, it reads an initial block of data
and offers it to each registered compression handler.
The one with the highest bid is initialized with the first block.
Similarly, the format handlers are polled to see which handler
is the best for each archive.
(Prior to 2.4.0, the format bidders were invoked for each
entry, but this design hindered error recovery.)
.Ss I/O Layer and Client Callbacks
The read API goes to some lengths to be nice to clients.
As a result, there are few restrictions on the behavior of
the client callbacks.
.Pp
The client read callback is expected to provide a block
of data on each call.
A zero-length return does indicate end of file, but otherwise
blocks may be as small as one byte or as large as the entire file.
In particular, blocks may be of different sizes.
.Pp
The client skip callback returns the number of bytes actually
skipped, which may be much smaller than the skip requested.
The only requirement is that the skip not be larger.
In particular, clients are allowed to return zero for any
skip that they don't want to handle.
The skip callback must never be invoked with a negative value.
.Pp
Keep in mind that not all clients are reading from disk:
clients reading from networks may provide different-sized
blocks on every request and cannot skip at all;
advanced clients may use
.Xr mmap 2
to read the entire file into memory at once and return the
entire file to libarchive as a single block;
other clients may begin asynchronous I/O operations for the
next block on each request.
.Ss Decompresssion Layer
The decompression layer not only handles decompression,
it also buffers data so that the format handlers see a
much nicer I/O model.
The decompression API is a two stage peek/consume model.
A read_ahead request specifies a minimum read amount;
the decompression layer must provide a pointer to at least
that much data.
If more data is immediately available, it should return more:
the format layer handles bulk data reads by asking for a minimum
of one byte and then copying as much data as is available.
.Pp
A subsequent call to the
.Fn consume
function advances the read pointer.
Note that data returned from a
.Fn read_ahead
call is guaranteed to remain in place until
the next call to
.Fn read_ahead .
Intervening calls to
.Fn consume
should not cause the data to move.
.Pp
Skip requests must always be handled exactly.
Decompression handlers that cannot seek forward should
not register a skip handler;
the API layer fills in a generic skip handler that reads and discards data.
.Pp
A decompression handler has a specific lifecycle:
.Bl -tag -compact -width indent
.It Registration/Configuration
When the client invokes the public support function,
the decompression handler invokes the internal
.Fn __archive_read_register_compression
function to provide bid and initialization functions.
This function returns
.Cm NULL
on error or else a pointer to a
.Cm struct decompressor_t .
This structure contains a
.Va void * config
slot that can be used for storing any customization information.
.It Bid
The bid function is invoked with a pointer and size of a block of data.
The decompressor can access its config data
through the
.Va decompressor
element of the
.Cm archive_read
object.
The bid function is otherwise stateless.
In particular, it must not perform any I/O operations.
.Pp
The value returned by the bid function indicates its suitability
for handling this data stream.
A bid of zero will ensure that this decompressor is never invoked.
Return zero if magic number checks fail.
Otherwise, your initial implementation should return the number of bits
actually checked.
For example, if you verify two full bytes and three bits of another
byte, bid 19.
Note that the initial block may be very short;
be careful to only inspect the data you are given.
(The current decompressors require two bytes for correct bidding.)
.It Initialize
The winning bidder will have its init function called.
This function should initialize the remaining slots of the
.Va struct decompressor_t
object pointed to by the
.Va decompressor
element of the
.Va archive_read
object.
In particular, it should allocate any working data it needs
in the
.Va data
slot of that structure.
The init function is called with the block of data that
was used for tasting.
At this point, the decompressor is responsible for all I/O
requests to the client callbacks.
The decompressor is free to read more data as and when
necessary.
.It Satisfy I/O requests
The format handler will invoke the
.Va read_ahead ,
.Va consume ,
and
.Va skip
functions as needed.
.It Finish
The finish method is called only once when the archive is closed.
It should release anything stored in the
.Va data
and
.Va config
slots of the
.Va decompressor
object.
It should not invoke the client close callback.
.El
.Ss Format Layer
The read formats have a similar lifecycle to the decompression handlers:
.Bl -tag -compact -width indent
.It Registration
Allocate your private data and initialize your pointers.
.It Bid
Formats bid by invoking the
.Fn read_ahead
decompression method but not calling the
.Fn consume
method.
This allows each bidder to look ahead in the input stream.
Bidders should not look further ahead than necessary, as long
look aheads put pressure on the decompression layer to buffer
lots of data.
Most formats only require a few hundred bytes of look ahead;
look aheads of a few kilobytes are reasonable.
(The ISO9660 reader sometimes looks ahead by 48k, which
should be considered an upper limit.)
.It Read header
The header read is usually the most complex part of any format.
There are a few strategies worth mentioning:
For formats such as tar or cpio, reading and parsing the header is
straightforward since headers alternate with data.
For formats that store all header data at the beginning of the file,
the first header read request may have to read all headers into
memory and store that data, sorted by the location of the file
data.
Subsequent header read requests will skip forward to the
beginning of the file data and return the corresponding header.
.It Read Data
The read data interface supports sparse files; this requires that
each call return a block of data specifying the file offset and
size.
This may require you to carefully track the location so that you
can return accurate file offsets for each read.
Remember that the decompressor will return as much data as it has.
Generally, you will want to request one byte,
examine the return value to see how much data is available, and
possibly trim that to the amount you can use.
You should invoke consume for each block just before you return it.
.It Skip All Data
The skip data call should skip over all file data and trailing padding.
This is called automatically by the API layer just before each
header read.
It is also called in response to the client calling the public
.Fn data_skip
function.
.It Cleanup
On cleanup, the format should release all of its allocated memory.
.El
.Ss API Layer
XXX to do XXX
.Sh WRITE ARCHITECTURE
The write API has a similar set of four layers:
an API layer, a format layer, a compression layer, and an I/O layer.
The registration here is much simpler because only
one format and one compression can be registered at a time.
.Ss I/O Layer and Client Callbacks
XXX To be written XXX
.Ss Compression Layer
XXX To be written XXX
.Ss Format Layer
XXX To be written XXX
.Ss API Layer
XXX To be written XXX
.Sh WRITE_DISK ARCHITECTURE
The write_disk API is intended to look just like the write API
to clients.
Since it does not handle multiple formats or compression, it
is not layered internally.
.Sh GENERAL SERVICES
The
.Nm archive_read ,
.Nm archive_write ,
and
.Nm archive_write_disk
objects all contain an initial
.Nm archive
object which provides common support for a set of standard services.
(Recall that ANSI/ISO C90 guarantees that you can cast freely between
a pointer to a structure and a pointer to the first element of that
structure.)
The
.Nm archive
object has a magic value that indicates which API this object
is associated with,
slots for storing error information,
and function pointers for virtualized API functions.
.Sh MISCELLANEOUS NOTES
Connecting existing archiving libraries into libarchive is generally
quite difficult.
In particular, many existing libraries strongly assume that you
are reading from a file; they seek forwards and backwards as necessary
to locate various pieces of information.
In contrast, libarchive never seeks backwards in its input, which
sometimes requires very different approaches.
.Pp
For example, libarchive's ISO9660 support operates very differently
from most ISO9660 readers.
The libarchive support utilizes a work-queue design that
keeps a list of known entries sorted by their location in the input.
Whenever libarchive's ISO9660 implementation is asked for the next
header, checks this list to find the next item on the disk.
Directories are parsed when they are encountered and new
items are added to the list.
This design relies heavily on the ISO9660 image being optimized so that
directories always occur earlier on the disk than the files they
describe.
.Pp
Depending on the specific format, such approaches may not be possible.
The ZIP format specification, for example, allows archivers to store
key information only at the end of the file.
In theory, it is possible to create ZIP archives that cannot
be read without seeking.
Fortunately, such archives are very rare, and libarchive can read
most ZIP archives, though it cannot always extract as much information
as a dedicated ZIP program.
.Sh SEE ALSO
.Xr archive 3 ,
.Xr archive_entry 3 ,
.Xr archive_read 3 ,
.Xr archive_write 3 ,
.Xr archive_write_disk 3
.Sh HISTORY
The
.Nm libarchive
library first appeared in
.Fx 5.3 .
.Sh AUTHORS
.An -nosplit
The
.Nm libarchive
library was written by
.An Tim Kientzle Aq kientzle@acm.org .
.Sh BUGS