b850ecc180
the illusion of a tunable setting but was always turned on regardless. MFC after: 1 week
832 lines
22 KiB
C
832 lines
22 KiB
C
/* $NetBSD: umodem.c,v 1.45 2002/09/23 05:51:23 simonb Exp $ */
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*-
|
|
* Copyright (c) 2003, M. Warner Losh <imp@FreeBSD.org>.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
|
* Carlstedt Research & Technology.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Comm Class spec: http://www.usb.org/developers/devclass_docs/usbccs10.pdf
|
|
* http://www.usb.org/developers/devclass_docs/usbcdc11.pdf
|
|
* http://www.usb.org/developers/devclass_docs/cdc_wmc10.zip
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
* - Add error recovery in various places; the big problem is what
|
|
* to do in a callback if there is an error.
|
|
* - Implement a Call Device for modems without multiplexed commands.
|
|
*
|
|
*/
|
|
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/linker_set.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbhid.h>
|
|
#include <dev/usb/usb_cdc.h>
|
|
#include "usbdevs.h"
|
|
|
|
#include <dev/usb/usb_ioctl.h>
|
|
|
|
#define USB_DEBUG_VAR umodem_debug
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/quirk/usb_quirk.h>
|
|
|
|
#include <dev/usb/serial/usb_serial.h>
|
|
|
|
#ifdef USB_DEBUG
|
|
static int umodem_debug = 0;
|
|
|
|
SYSCTL_NODE(_hw_usb, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem");
|
|
SYSCTL_INT(_hw_usb_umodem, OID_AUTO, debug, CTLFLAG_RW,
|
|
&umodem_debug, 0, "Debug level");
|
|
#endif
|
|
|
|
static const struct usb_device_id umodem_devs[] = {
|
|
/* Generic Modem class match */
|
|
{USB_IFACE_CLASS(UICLASS_CDC),
|
|
USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL),
|
|
USB_IFACE_PROTOCOL(UIPROTO_CDC_AT)},
|
|
/* Kyocera AH-K3001V */
|
|
{USB_VPI(USB_VENDOR_KYOCERA, USB_PRODUCT_KYOCERA_AHK3001V, 1)},
|
|
{USB_VPI(USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720, 1)},
|
|
{USB_VPI(USB_VENDOR_CURITEL, USB_PRODUCT_CURITEL_PC5740, 1)},
|
|
};
|
|
|
|
/*
|
|
* As speeds for umodem deivces increase, these numbers will need to
|
|
* be increased. They should be good for G3 speeds and below.
|
|
*
|
|
* TODO: The TTY buffers should be increased!
|
|
*/
|
|
#define UMODEM_BUF_SIZE 1024
|
|
|
|
enum {
|
|
UMODEM_BULK_WR,
|
|
UMODEM_BULK_RD,
|
|
UMODEM_INTR_RD,
|
|
UMODEM_N_TRANSFER,
|
|
};
|
|
|
|
#define UMODEM_MODVER 1 /* module version */
|
|
|
|
struct umodem_softc {
|
|
struct ucom_super_softc sc_super_ucom;
|
|
struct ucom_softc sc_ucom;
|
|
|
|
struct usb_xfer *sc_xfer[UMODEM_N_TRANSFER];
|
|
struct usb_device *sc_udev;
|
|
struct mtx sc_mtx;
|
|
|
|
uint16_t sc_line;
|
|
|
|
uint8_t sc_lsr; /* local status register */
|
|
uint8_t sc_msr; /* modem status register */
|
|
uint8_t sc_ctrl_iface_no;
|
|
uint8_t sc_data_iface_no;
|
|
uint8_t sc_iface_index[2];
|
|
uint8_t sc_cm_over_data;
|
|
uint8_t sc_cm_cap; /* CM capabilities */
|
|
uint8_t sc_acm_cap; /* ACM capabilities */
|
|
};
|
|
|
|
static device_probe_t umodem_probe;
|
|
static device_attach_t umodem_attach;
|
|
static device_detach_t umodem_detach;
|
|
|
|
static usb_callback_t umodem_intr_callback;
|
|
static usb_callback_t umodem_write_callback;
|
|
static usb_callback_t umodem_read_callback;
|
|
|
|
static void umodem_start_read(struct ucom_softc *);
|
|
static void umodem_stop_read(struct ucom_softc *);
|
|
static void umodem_start_write(struct ucom_softc *);
|
|
static void umodem_stop_write(struct ucom_softc *);
|
|
static void umodem_get_caps(struct usb_attach_arg *, uint8_t *, uint8_t *);
|
|
static void umodem_cfg_get_status(struct ucom_softc *, uint8_t *,
|
|
uint8_t *);
|
|
static int umodem_pre_param(struct ucom_softc *, struct termios *);
|
|
static void umodem_cfg_param(struct ucom_softc *, struct termios *);
|
|
static int umodem_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
|
|
struct thread *);
|
|
static void umodem_cfg_set_dtr(struct ucom_softc *, uint8_t);
|
|
static void umodem_cfg_set_rts(struct ucom_softc *, uint8_t);
|
|
static void umodem_cfg_set_break(struct ucom_softc *, uint8_t);
|
|
static void *umodem_get_desc(struct usb_attach_arg *, uint8_t, uint8_t);
|
|
static usb_error_t umodem_set_comm_feature(struct usb_device *, uint8_t,
|
|
uint16_t, uint16_t);
|
|
static void umodem_poll(struct ucom_softc *ucom);
|
|
|
|
static const struct usb_config umodem_config[UMODEM_N_TRANSFER] = {
|
|
|
|
[UMODEM_BULK_WR] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_OUT,
|
|
.if_index = 0,
|
|
.bufsize = UMODEM_BUF_SIZE,
|
|
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
|
|
.callback = &umodem_write_callback,
|
|
},
|
|
|
|
[UMODEM_BULK_RD] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.if_index = 0,
|
|
.bufsize = UMODEM_BUF_SIZE,
|
|
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
|
|
.callback = &umodem_read_callback,
|
|
},
|
|
|
|
[UMODEM_INTR_RD] = {
|
|
.type = UE_INTERRUPT,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.if_index = 1,
|
|
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,.no_pipe_ok = 1,},
|
|
.bufsize = 0, /* use wMaxPacketSize */
|
|
.callback = &umodem_intr_callback,
|
|
},
|
|
};
|
|
|
|
static const struct ucom_callback umodem_callback = {
|
|
.ucom_cfg_get_status = &umodem_cfg_get_status,
|
|
.ucom_cfg_set_dtr = &umodem_cfg_set_dtr,
|
|
.ucom_cfg_set_rts = &umodem_cfg_set_rts,
|
|
.ucom_cfg_set_break = &umodem_cfg_set_break,
|
|
.ucom_cfg_param = &umodem_cfg_param,
|
|
.ucom_pre_param = &umodem_pre_param,
|
|
.ucom_ioctl = &umodem_ioctl,
|
|
.ucom_start_read = &umodem_start_read,
|
|
.ucom_stop_read = &umodem_stop_read,
|
|
.ucom_start_write = &umodem_start_write,
|
|
.ucom_stop_write = &umodem_stop_write,
|
|
.ucom_poll = &umodem_poll,
|
|
};
|
|
|
|
static device_method_t umodem_methods[] = {
|
|
DEVMETHOD(device_probe, umodem_probe),
|
|
DEVMETHOD(device_attach, umodem_attach),
|
|
DEVMETHOD(device_detach, umodem_detach),
|
|
{0, 0}
|
|
};
|
|
|
|
static devclass_t umodem_devclass;
|
|
|
|
static driver_t umodem_driver = {
|
|
.name = "umodem",
|
|
.methods = umodem_methods,
|
|
.size = sizeof(struct umodem_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(umodem, uhub, umodem_driver, umodem_devclass, NULL, 0);
|
|
MODULE_DEPEND(umodem, ucom, 1, 1, 1);
|
|
MODULE_DEPEND(umodem, usb, 1, 1, 1);
|
|
MODULE_VERSION(umodem, UMODEM_MODVER);
|
|
|
|
static int
|
|
umodem_probe(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
int error;
|
|
|
|
DPRINTFN(11, "\n");
|
|
|
|
if (uaa->usb_mode != USB_MODE_HOST) {
|
|
return (ENXIO);
|
|
}
|
|
error = usbd_lookup_id_by_uaa(umodem_devs, sizeof(umodem_devs), uaa);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
umodem_attach(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
struct umodem_softc *sc = device_get_softc(dev);
|
|
struct usb_cdc_cm_descriptor *cmd;
|
|
struct usb_cdc_union_descriptor *cud;
|
|
uint8_t i;
|
|
int error;
|
|
|
|
device_set_usb_desc(dev);
|
|
mtx_init(&sc->sc_mtx, "umodem", NULL, MTX_DEF);
|
|
|
|
sc->sc_ctrl_iface_no = uaa->info.bIfaceNum;
|
|
sc->sc_iface_index[1] = uaa->info.bIfaceIndex;
|
|
sc->sc_udev = uaa->device;
|
|
|
|
umodem_get_caps(uaa, &sc->sc_cm_cap, &sc->sc_acm_cap);
|
|
|
|
/* get the data interface number */
|
|
|
|
cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
|
|
|
|
if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
|
|
|
|
cud = usbd_find_descriptor(uaa->device, NULL,
|
|
uaa->info.bIfaceIndex, UDESC_CS_INTERFACE,
|
|
0 - 1, UDESCSUB_CDC_UNION, 0 - 1);
|
|
|
|
if ((cud == NULL) || (cud->bLength < sizeof(*cud))) {
|
|
device_printf(dev, "Missing descriptor. "
|
|
"Assuming data interface is next.\n");
|
|
if (sc->sc_ctrl_iface_no == 0xFF)
|
|
goto detach;
|
|
else
|
|
sc->sc_data_iface_no =
|
|
sc->sc_ctrl_iface_no + 1;
|
|
} else {
|
|
sc->sc_data_iface_no = cud->bSlaveInterface[0];
|
|
}
|
|
} else {
|
|
sc->sc_data_iface_no = cmd->bDataInterface;
|
|
}
|
|
|
|
device_printf(dev, "data interface %d, has %sCM over "
|
|
"data, has %sbreak\n",
|
|
sc->sc_data_iface_no,
|
|
sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
|
|
sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
|
|
|
|
/* get the data interface too */
|
|
|
|
for (i = 0;; i++) {
|
|
struct usb_interface *iface;
|
|
struct usb_interface_descriptor *id;
|
|
|
|
iface = usbd_get_iface(uaa->device, i);
|
|
|
|
if (iface) {
|
|
|
|
id = usbd_get_interface_descriptor(iface);
|
|
|
|
if (id && (id->bInterfaceNumber == sc->sc_data_iface_no)) {
|
|
sc->sc_iface_index[0] = i;
|
|
usbd_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex);
|
|
break;
|
|
}
|
|
} else {
|
|
device_printf(dev, "no data interface\n");
|
|
goto detach;
|
|
}
|
|
}
|
|
|
|
if (usb_test_quirk(uaa, UQ_ASSUME_CM_OVER_DATA)) {
|
|
sc->sc_cm_over_data = 1;
|
|
} else {
|
|
if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
|
|
if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE) {
|
|
|
|
error = umodem_set_comm_feature
|
|
(uaa->device, sc->sc_ctrl_iface_no,
|
|
UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED);
|
|
|
|
/* ignore any errors */
|
|
}
|
|
sc->sc_cm_over_data = 1;
|
|
}
|
|
}
|
|
error = usbd_transfer_setup(uaa->device,
|
|
sc->sc_iface_index, sc->sc_xfer,
|
|
umodem_config, UMODEM_N_TRANSFER,
|
|
sc, &sc->sc_mtx);
|
|
if (error) {
|
|
goto detach;
|
|
}
|
|
|
|
/* clear stall at first run */
|
|
mtx_lock(&sc->sc_mtx);
|
|
usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_WR]);
|
|
usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_RD]);
|
|
mtx_unlock(&sc->sc_mtx);
|
|
|
|
error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
|
|
&umodem_callback, &sc->sc_mtx);
|
|
if (error) {
|
|
goto detach;
|
|
}
|
|
return (0);
|
|
|
|
detach:
|
|
umodem_detach(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
static void
|
|
umodem_start_read(struct ucom_softc *ucom)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
|
|
/* start interrupt endpoint, if any */
|
|
usbd_transfer_start(sc->sc_xfer[UMODEM_INTR_RD]);
|
|
|
|
/* start read endpoint */
|
|
usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_RD]);
|
|
}
|
|
|
|
static void
|
|
umodem_stop_read(struct ucom_softc *ucom)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
|
|
/* stop interrupt endpoint, if any */
|
|
usbd_transfer_stop(sc->sc_xfer[UMODEM_INTR_RD]);
|
|
|
|
/* stop read endpoint */
|
|
usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_RD]);
|
|
}
|
|
|
|
static void
|
|
umodem_start_write(struct ucom_softc *ucom)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_WR]);
|
|
}
|
|
|
|
static void
|
|
umodem_stop_write(struct ucom_softc *ucom)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_WR]);
|
|
}
|
|
|
|
static void
|
|
umodem_get_caps(struct usb_attach_arg *uaa, uint8_t *cm, uint8_t *acm)
|
|
{
|
|
struct usb_cdc_cm_descriptor *cmd;
|
|
struct usb_cdc_acm_descriptor *cad;
|
|
|
|
cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
|
|
if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
|
|
DPRINTF("no CM desc (faking one)\n");
|
|
*cm = USB_CDC_CM_DOES_CM | USB_CDC_CM_OVER_DATA;
|
|
} else
|
|
*cm = cmd->bmCapabilities;
|
|
|
|
cad = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM);
|
|
if ((cad == NULL) || (cad->bLength < sizeof(*cad))) {
|
|
DPRINTF("no ACM desc\n");
|
|
*acm = 0;
|
|
} else
|
|
*acm = cad->bmCapabilities;
|
|
}
|
|
|
|
static void
|
|
umodem_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
|
|
DPRINTF("\n");
|
|
|
|
*lsr = sc->sc_lsr;
|
|
*msr = sc->sc_msr;
|
|
}
|
|
|
|
static int
|
|
umodem_pre_param(struct ucom_softc *ucom, struct termios *t)
|
|
{
|
|
return (0); /* we accept anything */
|
|
}
|
|
|
|
static void
|
|
umodem_cfg_param(struct ucom_softc *ucom, struct termios *t)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
struct usb_cdc_line_state ls;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTF("sc=%p\n", sc);
|
|
|
|
bzero(&ls, sizeof(ls));
|
|
|
|
USETDW(ls.dwDTERate, t->c_ospeed);
|
|
|
|
ls.bCharFormat = (t->c_cflag & CSTOPB) ?
|
|
UCDC_STOP_BIT_2 : UCDC_STOP_BIT_1;
|
|
|
|
ls.bParityType = (t->c_cflag & PARENB) ?
|
|
((t->c_cflag & PARODD) ?
|
|
UCDC_PARITY_ODD : UCDC_PARITY_EVEN) : UCDC_PARITY_NONE;
|
|
|
|
switch (t->c_cflag & CSIZE) {
|
|
case CS5:
|
|
ls.bDataBits = 5;
|
|
break;
|
|
case CS6:
|
|
ls.bDataBits = 6;
|
|
break;
|
|
case CS7:
|
|
ls.bDataBits = 7;
|
|
break;
|
|
case CS8:
|
|
ls.bDataBits = 8;
|
|
break;
|
|
}
|
|
|
|
DPRINTF("rate=%d fmt=%d parity=%d bits=%d\n",
|
|
UGETDW(ls.dwDTERate), ls.bCharFormat,
|
|
ls.bParityType, ls.bDataBits);
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = UCDC_SET_LINE_CODING;
|
|
USETW(req.wValue, 0);
|
|
req.wIndex[0] = sc->sc_ctrl_iface_no;
|
|
req.wIndex[1] = 0;
|
|
USETW(req.wLength, sizeof(ls));
|
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, &ls, 0, 1000);
|
|
}
|
|
|
|
static int
|
|
umodem_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
|
|
int flag, struct thread *td)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
int error = 0;
|
|
|
|
DPRINTF("cmd=0x%08x\n", cmd);
|
|
|
|
switch (cmd) {
|
|
case USB_GET_CM_OVER_DATA:
|
|
*(int *)data = sc->sc_cm_over_data;
|
|
break;
|
|
|
|
case USB_SET_CM_OVER_DATA:
|
|
if (*(int *)data != sc->sc_cm_over_data) {
|
|
/* XXX change it */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DPRINTF("unknown\n");
|
|
error = ENOIOCTL;
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
umodem_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTF("onoff=%d\n", onoff);
|
|
|
|
if (onoff)
|
|
sc->sc_line |= UCDC_LINE_DTR;
|
|
else
|
|
sc->sc_line &= ~UCDC_LINE_DTR;
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
|
|
USETW(req.wValue, sc->sc_line);
|
|
req.wIndex[0] = sc->sc_ctrl_iface_no;
|
|
req.wIndex[1] = 0;
|
|
USETW(req.wLength, 0);
|
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
static void
|
|
umodem_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTF("onoff=%d\n", onoff);
|
|
|
|
if (onoff)
|
|
sc->sc_line |= UCDC_LINE_RTS;
|
|
else
|
|
sc->sc_line &= ~UCDC_LINE_RTS;
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
|
|
USETW(req.wValue, sc->sc_line);
|
|
req.wIndex[0] = sc->sc_ctrl_iface_no;
|
|
req.wIndex[1] = 0;
|
|
USETW(req.wLength, 0);
|
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
static void
|
|
umodem_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
struct usb_device_request req;
|
|
uint16_t temp;
|
|
|
|
DPRINTF("onoff=%d\n", onoff);
|
|
|
|
if (sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK) {
|
|
|
|
temp = onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF;
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = UCDC_SEND_BREAK;
|
|
USETW(req.wValue, temp);
|
|
req.wIndex[0] = sc->sc_ctrl_iface_no;
|
|
req.wIndex[1] = 0;
|
|
USETW(req.wLength, 0);
|
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
}
|
|
|
|
static void
|
|
umodem_intr_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct usb_cdc_notification pkt;
|
|
struct umodem_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_page_cache *pc;
|
|
uint16_t wLen;
|
|
int actlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
|
|
if (actlen < 8) {
|
|
DPRINTF("received short packet, "
|
|
"%d bytes\n", actlen);
|
|
goto tr_setup;
|
|
}
|
|
if (actlen > sizeof(pkt)) {
|
|
DPRINTF("truncating message\n");
|
|
actlen = sizeof(pkt);
|
|
}
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
usbd_copy_out(pc, 0, &pkt, actlen);
|
|
|
|
actlen -= 8;
|
|
|
|
wLen = UGETW(pkt.wLength);
|
|
if (actlen > wLen) {
|
|
actlen = wLen;
|
|
}
|
|
if (pkt.bmRequestType != UCDC_NOTIFICATION) {
|
|
DPRINTF("unknown message type, "
|
|
"0x%02x, on notify pipe!\n",
|
|
pkt.bmRequestType);
|
|
goto tr_setup;
|
|
}
|
|
switch (pkt.bNotification) {
|
|
case UCDC_N_SERIAL_STATE:
|
|
/*
|
|
* Set the serial state in ucom driver based on
|
|
* the bits from the notify message
|
|
*/
|
|
if (actlen < 2) {
|
|
DPRINTF("invalid notification "
|
|
"length, %d bytes!\n", actlen);
|
|
break;
|
|
}
|
|
DPRINTF("notify bytes = %02x%02x\n",
|
|
pkt.data[0],
|
|
pkt.data[1]);
|
|
|
|
/* Currently, lsr is always zero. */
|
|
sc->sc_lsr = 0;
|
|
sc->sc_msr = 0;
|
|
|
|
if (pkt.data[0] & UCDC_N_SERIAL_RI) {
|
|
sc->sc_msr |= SER_RI;
|
|
}
|
|
if (pkt.data[0] & UCDC_N_SERIAL_DSR) {
|
|
sc->sc_msr |= SER_DSR;
|
|
}
|
|
if (pkt.data[0] & UCDC_N_SERIAL_DCD) {
|
|
sc->sc_msr |= SER_DCD;
|
|
}
|
|
ucom_status_change(&sc->sc_ucom);
|
|
break;
|
|
|
|
default:
|
|
DPRINTF("unknown notify message: 0x%02x\n",
|
|
pkt.bNotification);
|
|
break;
|
|
}
|
|
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
return;
|
|
|
|
default: /* Error */
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
|
|
}
|
|
}
|
|
|
|
static void
|
|
umodem_write_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct umodem_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_page_cache *pc;
|
|
uint32_t actlen;
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_SETUP:
|
|
case USB_ST_TRANSFERRED:
|
|
tr_setup:
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
if (ucom_get_data(&sc->sc_ucom, pc, 0,
|
|
UMODEM_BUF_SIZE, &actlen)) {
|
|
|
|
usbd_xfer_set_frame_len(xfer, 0, actlen);
|
|
usbd_transfer_submit(xfer);
|
|
}
|
|
return;
|
|
|
|
default: /* Error */
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
umodem_read_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct umodem_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_page_cache *pc;
|
|
int actlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
|
|
DPRINTF("actlen=%d\n", actlen);
|
|
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
|
|
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
return;
|
|
|
|
default: /* Error */
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void *
|
|
umodem_get_desc(struct usb_attach_arg *uaa, uint8_t type, uint8_t subtype)
|
|
{
|
|
return (usbd_find_descriptor(uaa->device, NULL, uaa->info.bIfaceIndex,
|
|
type, 0 - 1, subtype, 0 - 1));
|
|
}
|
|
|
|
static usb_error_t
|
|
umodem_set_comm_feature(struct usb_device *udev, uint8_t iface_no,
|
|
uint16_t feature, uint16_t state)
|
|
{
|
|
struct usb_device_request req;
|
|
struct usb_cdc_abstract_state ast;
|
|
|
|
DPRINTF("feature=%d state=%d\n",
|
|
feature, state);
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = UCDC_SET_COMM_FEATURE;
|
|
USETW(req.wValue, feature);
|
|
req.wIndex[0] = iface_no;
|
|
req.wIndex[1] = 0;
|
|
USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH);
|
|
USETW(ast.wState, state);
|
|
|
|
return (usbd_do_request(udev, NULL, &req, &ast));
|
|
}
|
|
|
|
static int
|
|
umodem_detach(device_t dev)
|
|
{
|
|
struct umodem_softc *sc = device_get_softc(dev);
|
|
|
|
DPRINTF("sc=%p\n", sc);
|
|
|
|
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom, 1);
|
|
usbd_transfer_unsetup(sc->sc_xfer, UMODEM_N_TRANSFER);
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
umodem_poll(struct ucom_softc *ucom)
|
|
{
|
|
struct umodem_softc *sc = ucom->sc_parent;
|
|
usbd_transfer_poll(sc->sc_xfer, UMODEM_N_TRANSFER);
|
|
}
|