7a79cebfba
connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
3583 lines
93 KiB
C
3583 lines
93 KiB
C
/*-
|
|
* Copyright (c) 2004, 2005
|
|
* Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
|
|
* Copyright (c) 2005-2006 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2007 Andrew Thompson <thompsa@FreeBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*-
|
|
* Intel(R) PRO/Wireless 2200BG/2225BG/2915ABG driver
|
|
* http://www.intel.com/network/connectivity/products/wireless/prowireless_mobile.htm
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/namei.h>
|
|
#include <sys/linker.h>
|
|
#include <sys/firmware.h>
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
#include <net80211/ieee80211_input.h>
|
|
#include <net80211/ieee80211_regdomain.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_ether.h>
|
|
|
|
#include <dev/iwi/if_iwireg.h>
|
|
#include <dev/iwi/if_iwivar.h>
|
|
#include <dev/iwi/if_iwi_ioctl.h>
|
|
|
|
#define IWI_DEBUG
|
|
#ifdef IWI_DEBUG
|
|
#define DPRINTF(x) do { if (iwi_debug > 0) printf x; } while (0)
|
|
#define DPRINTFN(n, x) do { if (iwi_debug >= (n)) printf x; } while (0)
|
|
int iwi_debug = 0;
|
|
SYSCTL_INT(_debug, OID_AUTO, iwi, CTLFLAG_RW, &iwi_debug, 0, "iwi debug level");
|
|
|
|
static const char *iwi_fw_states[] = {
|
|
"IDLE", /* IWI_FW_IDLE */
|
|
"LOADING", /* IWI_FW_LOADING */
|
|
"ASSOCIATING", /* IWI_FW_ASSOCIATING */
|
|
"DISASSOCIATING", /* IWI_FW_DISASSOCIATING */
|
|
"SCANNING", /* IWI_FW_SCANNING */
|
|
};
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n, x)
|
|
#endif
|
|
|
|
MODULE_DEPEND(iwi, pci, 1, 1, 1);
|
|
MODULE_DEPEND(iwi, wlan, 1, 1, 1);
|
|
MODULE_DEPEND(iwi, firmware, 1, 1, 1);
|
|
|
|
enum {
|
|
IWI_LED_TX,
|
|
IWI_LED_RX,
|
|
IWI_LED_POLL,
|
|
};
|
|
|
|
struct iwi_ident {
|
|
uint16_t vendor;
|
|
uint16_t device;
|
|
const char *name;
|
|
};
|
|
|
|
static const struct iwi_ident iwi_ident_table[] = {
|
|
{ 0x8086, 0x4220, "Intel(R) PRO/Wireless 2200BG" },
|
|
{ 0x8086, 0x4221, "Intel(R) PRO/Wireless 2225BG" },
|
|
{ 0x8086, 0x4223, "Intel(R) PRO/Wireless 2915ABG" },
|
|
{ 0x8086, 0x4224, "Intel(R) PRO/Wireless 2915ABG" },
|
|
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static struct ieee80211vap *iwi_vap_create(struct ieee80211com *,
|
|
const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
static void iwi_vap_delete(struct ieee80211vap *);
|
|
static void iwi_dma_map_addr(void *, bus_dma_segment_t *, int, int);
|
|
static int iwi_alloc_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *,
|
|
int);
|
|
static void iwi_reset_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *);
|
|
static void iwi_free_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *);
|
|
static int iwi_alloc_tx_ring(struct iwi_softc *, struct iwi_tx_ring *,
|
|
int, bus_addr_t, bus_addr_t);
|
|
static void iwi_reset_tx_ring(struct iwi_softc *, struct iwi_tx_ring *);
|
|
static void iwi_free_tx_ring(struct iwi_softc *, struct iwi_tx_ring *);
|
|
static int iwi_alloc_rx_ring(struct iwi_softc *, struct iwi_rx_ring *,
|
|
int);
|
|
static void iwi_reset_rx_ring(struct iwi_softc *, struct iwi_rx_ring *);
|
|
static void iwi_free_rx_ring(struct iwi_softc *, struct iwi_rx_ring *);
|
|
static struct ieee80211_node *iwi_node_alloc(struct ieee80211vap *,
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
static void iwi_node_free(struct ieee80211_node *);
|
|
static void iwi_media_status(struct ifnet *, struct ifmediareq *);
|
|
static int iwi_newstate(struct ieee80211vap *, enum ieee80211_state, int);
|
|
static void iwi_wme_init(struct iwi_softc *);
|
|
static int iwi_wme_setparams(struct iwi_softc *);
|
|
static void iwi_update_wme(void *, int);
|
|
static int iwi_wme_update(struct ieee80211com *);
|
|
static uint16_t iwi_read_prom_word(struct iwi_softc *, uint8_t);
|
|
static void iwi_frame_intr(struct iwi_softc *, struct iwi_rx_data *, int,
|
|
struct iwi_frame *);
|
|
static void iwi_notification_intr(struct iwi_softc *, struct iwi_notif *);
|
|
static void iwi_rx_intr(struct iwi_softc *);
|
|
static void iwi_tx_intr(struct iwi_softc *, struct iwi_tx_ring *);
|
|
static void iwi_intr(void *);
|
|
static int iwi_cmd(struct iwi_softc *, uint8_t, void *, uint8_t);
|
|
static void iwi_write_ibssnode(struct iwi_softc *, const u_int8_t [], int);
|
|
static int iwi_tx_start(struct iwi_softc *, struct mbuf *,
|
|
struct ieee80211_node *, int);
|
|
static int iwi_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
const struct ieee80211_bpf_params *);
|
|
static void iwi_start(struct iwi_softc *);
|
|
static int iwi_transmit(struct ieee80211com *, struct mbuf *);
|
|
static void iwi_watchdog(void *);
|
|
static int iwi_ioctl(struct ieee80211com *, u_long, void *);
|
|
static void iwi_parent(struct ieee80211com *);
|
|
static void iwi_stop_master(struct iwi_softc *);
|
|
static int iwi_reset(struct iwi_softc *);
|
|
static int iwi_load_ucode(struct iwi_softc *, const struct iwi_fw *);
|
|
static int iwi_load_firmware(struct iwi_softc *, const struct iwi_fw *);
|
|
static void iwi_release_fw_dma(struct iwi_softc *sc);
|
|
static int iwi_config(struct iwi_softc *);
|
|
static int iwi_get_firmware(struct iwi_softc *, enum ieee80211_opmode);
|
|
static void iwi_put_firmware(struct iwi_softc *);
|
|
static void iwi_monitor_scan(void *, int);
|
|
static int iwi_scanchan(struct iwi_softc *, unsigned long, int);
|
|
static void iwi_scan_start(struct ieee80211com *);
|
|
static void iwi_scan_end(struct ieee80211com *);
|
|
static void iwi_set_channel(struct ieee80211com *);
|
|
static void iwi_scan_curchan(struct ieee80211_scan_state *, unsigned long maxdwell);
|
|
static void iwi_scan_mindwell(struct ieee80211_scan_state *);
|
|
static int iwi_auth_and_assoc(struct iwi_softc *, struct ieee80211vap *);
|
|
static void iwi_disassoc(void *, int);
|
|
static int iwi_disassociate(struct iwi_softc *, int quiet);
|
|
static void iwi_init_locked(struct iwi_softc *);
|
|
static void iwi_init(void *);
|
|
static int iwi_init_fw_dma(struct iwi_softc *, int);
|
|
static void iwi_stop_locked(void *);
|
|
static void iwi_stop(struct iwi_softc *);
|
|
static void iwi_restart(void *, int);
|
|
static int iwi_getrfkill(struct iwi_softc *);
|
|
static void iwi_radio_on(void *, int);
|
|
static void iwi_radio_off(void *, int);
|
|
static void iwi_sysctlattach(struct iwi_softc *);
|
|
static void iwi_led_event(struct iwi_softc *, int);
|
|
static void iwi_ledattach(struct iwi_softc *);
|
|
|
|
static int iwi_probe(device_t);
|
|
static int iwi_attach(device_t);
|
|
static int iwi_detach(device_t);
|
|
static int iwi_shutdown(device_t);
|
|
static int iwi_suspend(device_t);
|
|
static int iwi_resume(device_t);
|
|
|
|
static device_method_t iwi_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, iwi_probe),
|
|
DEVMETHOD(device_attach, iwi_attach),
|
|
DEVMETHOD(device_detach, iwi_detach),
|
|
DEVMETHOD(device_shutdown, iwi_shutdown),
|
|
DEVMETHOD(device_suspend, iwi_suspend),
|
|
DEVMETHOD(device_resume, iwi_resume),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t iwi_driver = {
|
|
"iwi",
|
|
iwi_methods,
|
|
sizeof (struct iwi_softc)
|
|
};
|
|
|
|
static devclass_t iwi_devclass;
|
|
|
|
DRIVER_MODULE(iwi, pci, iwi_driver, iwi_devclass, NULL, NULL);
|
|
|
|
MODULE_VERSION(iwi, 1);
|
|
|
|
static __inline uint8_t
|
|
MEM_READ_1(struct iwi_softc *sc, uint32_t addr)
|
|
{
|
|
CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr);
|
|
return CSR_READ_1(sc, IWI_CSR_INDIRECT_DATA);
|
|
}
|
|
|
|
static __inline uint32_t
|
|
MEM_READ_4(struct iwi_softc *sc, uint32_t addr)
|
|
{
|
|
CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr);
|
|
return CSR_READ_4(sc, IWI_CSR_INDIRECT_DATA);
|
|
}
|
|
|
|
static int
|
|
iwi_probe(device_t dev)
|
|
{
|
|
const struct iwi_ident *ident;
|
|
|
|
for (ident = iwi_ident_table; ident->name != NULL; ident++) {
|
|
if (pci_get_vendor(dev) == ident->vendor &&
|
|
pci_get_device(dev) == ident->device) {
|
|
device_set_desc(dev, ident->name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
}
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
iwi_attach(device_t dev)
|
|
{
|
|
struct iwi_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint16_t val;
|
|
int i, error;
|
|
uint8_t bands;
|
|
|
|
sc->sc_dev = dev;
|
|
|
|
IWI_LOCK_INIT(sc);
|
|
mbufq_init(&sc->sc_snd, ifqmaxlen);
|
|
|
|
sc->sc_unr = new_unrhdr(1, IWI_MAX_IBSSNODE-1, &sc->sc_mtx);
|
|
|
|
TASK_INIT(&sc->sc_radiontask, 0, iwi_radio_on, sc);
|
|
TASK_INIT(&sc->sc_radiofftask, 0, iwi_radio_off, sc);
|
|
TASK_INIT(&sc->sc_restarttask, 0, iwi_restart, sc);
|
|
TASK_INIT(&sc->sc_disassoctask, 0, iwi_disassoc, sc);
|
|
TASK_INIT(&sc->sc_wmetask, 0, iwi_update_wme, sc);
|
|
TASK_INIT(&sc->sc_monitortask, 0, iwi_monitor_scan, sc);
|
|
|
|
callout_init_mtx(&sc->sc_wdtimer, &sc->sc_mtx, 0);
|
|
callout_init_mtx(&sc->sc_rftimer, &sc->sc_mtx, 0);
|
|
|
|
pci_write_config(dev, 0x41, 0, 1);
|
|
|
|
/* enable bus-mastering */
|
|
pci_enable_busmaster(dev);
|
|
|
|
i = PCIR_BAR(0);
|
|
sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i, RF_ACTIVE);
|
|
if (sc->mem == NULL) {
|
|
device_printf(dev, "could not allocate memory resource\n");
|
|
goto fail;
|
|
}
|
|
|
|
sc->sc_st = rman_get_bustag(sc->mem);
|
|
sc->sc_sh = rman_get_bushandle(sc->mem);
|
|
|
|
i = 0;
|
|
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
|
|
RF_ACTIVE | RF_SHAREABLE);
|
|
if (sc->irq == NULL) {
|
|
device_printf(dev, "could not allocate interrupt resource\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (iwi_reset(sc) != 0) {
|
|
device_printf(dev, "could not reset adapter\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Allocate rings.
|
|
*/
|
|
if (iwi_alloc_cmd_ring(sc, &sc->cmdq, IWI_CMD_RING_COUNT) != 0) {
|
|
device_printf(dev, "could not allocate Cmd ring\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
error = iwi_alloc_tx_ring(sc, &sc->txq[i], IWI_TX_RING_COUNT,
|
|
IWI_CSR_TX1_RIDX + i * 4,
|
|
IWI_CSR_TX1_WIDX + i * 4);
|
|
if (error != 0) {
|
|
device_printf(dev, "could not allocate Tx ring %d\n",
|
|
i+i);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (iwi_alloc_rx_ring(sc, &sc->rxq, IWI_RX_RING_COUNT) != 0) {
|
|
device_printf(dev, "could not allocate Rx ring\n");
|
|
goto fail;
|
|
}
|
|
|
|
iwi_wme_init(sc);
|
|
|
|
ic->ic_softc = sc;
|
|
ic->ic_name = device_get_nameunit(dev);
|
|
ic->ic_opmode = IEEE80211_M_STA;
|
|
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
|
|
|
/* set device capabilities */
|
|
ic->ic_caps =
|
|
IEEE80211_C_STA /* station mode supported */
|
|
| IEEE80211_C_IBSS /* IBSS mode supported */
|
|
| IEEE80211_C_MONITOR /* monitor mode supported */
|
|
| IEEE80211_C_PMGT /* power save supported */
|
|
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
|
|
| IEEE80211_C_WPA /* 802.11i */
|
|
| IEEE80211_C_WME /* 802.11e */
|
|
#if 0
|
|
| IEEE80211_C_BGSCAN /* capable of bg scanning */
|
|
#endif
|
|
;
|
|
|
|
/* read MAC address from EEPROM */
|
|
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 0);
|
|
ic->ic_macaddr[0] = val & 0xff;
|
|
ic->ic_macaddr[1] = val >> 8;
|
|
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 1);
|
|
ic->ic_macaddr[2] = val & 0xff;
|
|
ic->ic_macaddr[3] = val >> 8;
|
|
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 2);
|
|
ic->ic_macaddr[4] = val & 0xff;
|
|
ic->ic_macaddr[5] = val >> 8;
|
|
|
|
bands = 0;
|
|
setbit(&bands, IEEE80211_MODE_11B);
|
|
setbit(&bands, IEEE80211_MODE_11G);
|
|
if (pci_get_device(dev) >= 0x4223)
|
|
setbit(&bands, IEEE80211_MODE_11A);
|
|
ieee80211_init_channels(ic, NULL, &bands);
|
|
|
|
ieee80211_ifattach(ic);
|
|
/* override default methods */
|
|
ic->ic_node_alloc = iwi_node_alloc;
|
|
sc->sc_node_free = ic->ic_node_free;
|
|
ic->ic_node_free = iwi_node_free;
|
|
ic->ic_raw_xmit = iwi_raw_xmit;
|
|
ic->ic_scan_start = iwi_scan_start;
|
|
ic->ic_scan_end = iwi_scan_end;
|
|
ic->ic_set_channel = iwi_set_channel;
|
|
ic->ic_scan_curchan = iwi_scan_curchan;
|
|
ic->ic_scan_mindwell = iwi_scan_mindwell;
|
|
ic->ic_wme.wme_update = iwi_wme_update;
|
|
|
|
ic->ic_vap_create = iwi_vap_create;
|
|
ic->ic_vap_delete = iwi_vap_delete;
|
|
ic->ic_ioctl = iwi_ioctl;
|
|
ic->ic_transmit = iwi_transmit;
|
|
ic->ic_parent = iwi_parent;
|
|
|
|
ieee80211_radiotap_attach(ic,
|
|
&sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
|
|
IWI_TX_RADIOTAP_PRESENT,
|
|
&sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
|
|
IWI_RX_RADIOTAP_PRESENT);
|
|
|
|
iwi_sysctlattach(sc);
|
|
iwi_ledattach(sc);
|
|
|
|
/*
|
|
* Hook our interrupt after all initialization is complete.
|
|
*/
|
|
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, iwi_intr, sc, &sc->sc_ih);
|
|
if (error != 0) {
|
|
device_printf(dev, "could not set up interrupt\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (bootverbose)
|
|
ieee80211_announce(ic);
|
|
|
|
return 0;
|
|
fail:
|
|
/* XXX fix */
|
|
iwi_detach(dev);
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
iwi_detach(device_t dev)
|
|
{
|
|
struct iwi_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
bus_teardown_intr(dev, sc->irq, sc->sc_ih);
|
|
|
|
/* NB: do early to drain any pending tasks */
|
|
ieee80211_draintask(ic, &sc->sc_radiontask);
|
|
ieee80211_draintask(ic, &sc->sc_radiofftask);
|
|
ieee80211_draintask(ic, &sc->sc_restarttask);
|
|
ieee80211_draintask(ic, &sc->sc_disassoctask);
|
|
ieee80211_draintask(ic, &sc->sc_monitortask);
|
|
|
|
iwi_stop(sc);
|
|
|
|
ieee80211_ifdetach(ic);
|
|
|
|
iwi_put_firmware(sc);
|
|
iwi_release_fw_dma(sc);
|
|
|
|
iwi_free_cmd_ring(sc, &sc->cmdq);
|
|
iwi_free_tx_ring(sc, &sc->txq[0]);
|
|
iwi_free_tx_ring(sc, &sc->txq[1]);
|
|
iwi_free_tx_ring(sc, &sc->txq[2]);
|
|
iwi_free_tx_ring(sc, &sc->txq[3]);
|
|
iwi_free_rx_ring(sc, &sc->rxq);
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), sc->irq);
|
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem),
|
|
sc->mem);
|
|
|
|
delete_unrhdr(sc->sc_unr);
|
|
mbufq_drain(&sc->sc_snd);
|
|
|
|
IWI_LOCK_DESTROY(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ieee80211vap *
|
|
iwi_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
|
|
enum ieee80211_opmode opmode, int flags,
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
const uint8_t mac[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
struct iwi_vap *ivp;
|
|
struct ieee80211vap *vap;
|
|
int i;
|
|
|
|
if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
|
|
return NULL;
|
|
/*
|
|
* Get firmware image (and possibly dma memory) on mode change.
|
|
*/
|
|
if (iwi_get_firmware(sc, opmode))
|
|
return NULL;
|
|
/* allocate DMA memory for mapping firmware image */
|
|
i = sc->fw_fw.size;
|
|
if (sc->fw_boot.size > i)
|
|
i = sc->fw_boot.size;
|
|
/* XXX do we dma the ucode as well ? */
|
|
if (sc->fw_uc.size > i)
|
|
i = sc->fw_uc.size;
|
|
if (iwi_init_fw_dma(sc, i))
|
|
return NULL;
|
|
|
|
ivp = malloc(sizeof(struct iwi_vap), M_80211_VAP, M_WAITOK | M_ZERO);
|
|
vap = &ivp->iwi_vap;
|
|
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
|
|
/* override the default, the setting comes from the linux driver */
|
|
vap->iv_bmissthreshold = 24;
|
|
/* override with driver methods */
|
|
ivp->iwi_newstate = vap->iv_newstate;
|
|
vap->iv_newstate = iwi_newstate;
|
|
|
|
/* complete setup */
|
|
ieee80211_vap_attach(vap, ieee80211_media_change, iwi_media_status,
|
|
mac);
|
|
ic->ic_opmode = opmode;
|
|
return vap;
|
|
}
|
|
|
|
static void
|
|
iwi_vap_delete(struct ieee80211vap *vap)
|
|
{
|
|
struct iwi_vap *ivp = IWI_VAP(vap);
|
|
|
|
ieee80211_vap_detach(vap);
|
|
free(ivp, M_80211_VAP);
|
|
}
|
|
|
|
static void
|
|
iwi_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
if (error != 0)
|
|
return;
|
|
|
|
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
|
|
|
|
*(bus_addr_t *)arg = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
iwi_alloc_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring, int count)
|
|
{
|
|
int error;
|
|
|
|
ring->count = count;
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = 0;
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
count * IWI_CMD_DESC_SIZE, 1, count * IWI_CMD_DESC_SIZE, 0,
|
|
NULL, NULL, &ring->desc_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
|
|
count * IWI_CMD_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not load desc DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail: iwi_free_cmd_ring(sc, ring);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
iwi_reset_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring)
|
|
{
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = 0;
|
|
}
|
|
|
|
static void
|
|
iwi_free_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring)
|
|
{
|
|
if (ring->desc != NULL) {
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
|
|
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
|
|
}
|
|
|
|
if (ring->desc_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->desc_dmat);
|
|
}
|
|
|
|
static int
|
|
iwi_alloc_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring, int count,
|
|
bus_addr_t csr_ridx, bus_addr_t csr_widx)
|
|
{
|
|
int i, error;
|
|
|
|
ring->count = count;
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = 0;
|
|
ring->csr_ridx = csr_ridx;
|
|
ring->csr_widx = csr_widx;
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
count * IWI_TX_DESC_SIZE, 1, count * IWI_TX_DESC_SIZE, 0, NULL,
|
|
NULL, &ring->desc_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
|
|
count * IWI_TX_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not load desc DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
ring->data = malloc(count * sizeof (struct iwi_tx_data), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (ring->data == NULL) {
|
|
device_printf(sc->sc_dev, "could not allocate soft data\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
|
|
IWI_MAX_NSEG, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create data DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < count; i++) {
|
|
error = bus_dmamap_create(ring->data_dmat, 0,
|
|
&ring->data[i].map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail: iwi_free_tx_ring(sc, ring);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
iwi_reset_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring)
|
|
{
|
|
struct iwi_tx_data *data;
|
|
int i;
|
|
|
|
for (i = 0; i < ring->count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
data->m = NULL;
|
|
}
|
|
|
|
if (data->ni != NULL) {
|
|
ieee80211_free_node(data->ni);
|
|
data->ni = NULL;
|
|
}
|
|
}
|
|
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = 0;
|
|
}
|
|
|
|
static void
|
|
iwi_free_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring)
|
|
{
|
|
struct iwi_tx_data *data;
|
|
int i;
|
|
|
|
if (ring->desc != NULL) {
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
|
|
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
|
|
}
|
|
|
|
if (ring->desc_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->desc_dmat);
|
|
|
|
if (ring->data != NULL) {
|
|
for (i = 0; i < ring->count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
}
|
|
|
|
if (data->ni != NULL)
|
|
ieee80211_free_node(data->ni);
|
|
|
|
if (data->map != NULL)
|
|
bus_dmamap_destroy(ring->data_dmat, data->map);
|
|
}
|
|
|
|
free(ring->data, M_DEVBUF);
|
|
}
|
|
|
|
if (ring->data_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->data_dmat);
|
|
}
|
|
|
|
static int
|
|
iwi_alloc_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring, int count)
|
|
{
|
|
struct iwi_rx_data *data;
|
|
int i, error;
|
|
|
|
ring->count = count;
|
|
ring->cur = 0;
|
|
|
|
ring->data = malloc(count * sizeof (struct iwi_rx_data), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (ring->data == NULL) {
|
|
device_printf(sc->sc_dev, "could not allocate soft data\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
|
|
1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create data DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (data->m == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate rx mbuf\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->data_dmat, data->map,
|
|
mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr,
|
|
&data->physaddr, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load rx buf DMA map");
|
|
goto fail;
|
|
}
|
|
|
|
data->reg = IWI_CSR_RX_BASE + i * 4;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail: iwi_free_rx_ring(sc, ring);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
iwi_reset_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring)
|
|
{
|
|
ring->cur = 0;
|
|
}
|
|
|
|
static void
|
|
iwi_free_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring)
|
|
{
|
|
struct iwi_rx_data *data;
|
|
int i;
|
|
|
|
if (ring->data != NULL) {
|
|
for (i = 0; i < ring->count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
}
|
|
|
|
if (data->map != NULL)
|
|
bus_dmamap_destroy(ring->data_dmat, data->map);
|
|
}
|
|
|
|
free(ring->data, M_DEVBUF);
|
|
}
|
|
|
|
if (ring->data_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->data_dmat);
|
|
}
|
|
|
|
static int
|
|
iwi_shutdown(device_t dev)
|
|
{
|
|
struct iwi_softc *sc = device_get_softc(dev);
|
|
|
|
iwi_stop(sc);
|
|
iwi_put_firmware(sc); /* ??? XXX */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
iwi_suspend(device_t dev)
|
|
{
|
|
struct iwi_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
ieee80211_suspend_all(ic);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
iwi_resume(device_t dev)
|
|
{
|
|
struct iwi_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
pci_write_config(dev, 0x41, 0, 1);
|
|
|
|
ieee80211_resume_all(ic);
|
|
return 0;
|
|
}
|
|
|
|
static struct ieee80211_node *
|
|
iwi_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct iwi_node *in;
|
|
|
|
in = malloc(sizeof (struct iwi_node), M_80211_NODE, M_NOWAIT | M_ZERO);
|
|
if (in == NULL)
|
|
return NULL;
|
|
/* XXX assign sta table entry for adhoc */
|
|
in->in_station = -1;
|
|
|
|
return &in->in_node;
|
|
}
|
|
|
|
static void
|
|
iwi_node_free(struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
struct iwi_node *in = (struct iwi_node *)ni;
|
|
|
|
if (in->in_station != -1) {
|
|
DPRINTF(("%s mac %6D station %u\n", __func__,
|
|
ni->ni_macaddr, ":", in->in_station));
|
|
free_unr(sc->sc_unr, in->in_station);
|
|
}
|
|
|
|
sc->sc_node_free(ni);
|
|
}
|
|
|
|
/*
|
|
* Convert h/w rate code to IEEE rate code.
|
|
*/
|
|
static int
|
|
iwi_cvtrate(int iwirate)
|
|
{
|
|
switch (iwirate) {
|
|
case IWI_RATE_DS1: return 2;
|
|
case IWI_RATE_DS2: return 4;
|
|
case IWI_RATE_DS5: return 11;
|
|
case IWI_RATE_DS11: return 22;
|
|
case IWI_RATE_OFDM6: return 12;
|
|
case IWI_RATE_OFDM9: return 18;
|
|
case IWI_RATE_OFDM12: return 24;
|
|
case IWI_RATE_OFDM18: return 36;
|
|
case IWI_RATE_OFDM24: return 48;
|
|
case IWI_RATE_OFDM36: return 72;
|
|
case IWI_RATE_OFDM48: return 96;
|
|
case IWI_RATE_OFDM54: return 108;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The firmware automatically adapts the transmit speed. We report its current
|
|
* value here.
|
|
*/
|
|
static void
|
|
iwi_media_status(struct ifnet *ifp, struct ifmediareq *imr)
|
|
{
|
|
struct ieee80211vap *vap = ifp->if_softc;
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
struct ieee80211_node *ni;
|
|
|
|
/* read current transmission rate from adapter */
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
ni->ni_txrate =
|
|
iwi_cvtrate(CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE));
|
|
ieee80211_free_node(ni);
|
|
ieee80211_media_status(ifp, imr);
|
|
}
|
|
|
|
static int
|
|
iwi_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct iwi_vap *ivp = IWI_VAP(vap);
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
IWI_LOCK_DECL;
|
|
|
|
DPRINTF(("%s: %s -> %s flags 0x%x\n", __func__,
|
|
ieee80211_state_name[vap->iv_state],
|
|
ieee80211_state_name[nstate], sc->flags));
|
|
|
|
IEEE80211_UNLOCK(ic);
|
|
IWI_LOCK(sc);
|
|
switch (nstate) {
|
|
case IEEE80211_S_INIT:
|
|
/*
|
|
* NB: don't try to do this if iwi_stop_master has
|
|
* shutdown the firmware and disabled interrupts.
|
|
*/
|
|
if (vap->iv_state == IEEE80211_S_RUN &&
|
|
(sc->flags & IWI_FLAG_FW_INITED))
|
|
iwi_disassociate(sc, 0);
|
|
break;
|
|
case IEEE80211_S_AUTH:
|
|
iwi_auth_and_assoc(sc, vap);
|
|
break;
|
|
case IEEE80211_S_RUN:
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS &&
|
|
vap->iv_state == IEEE80211_S_SCAN) {
|
|
/*
|
|
* XXX when joining an ibss network we are called
|
|
* with a SCAN -> RUN transition on scan complete.
|
|
* Use that to call iwi_auth_and_assoc. On completing
|
|
* the join we are then called again with an
|
|
* AUTH -> RUN transition and we want to do nothing.
|
|
* This is all totally bogus and needs to be redone.
|
|
*/
|
|
iwi_auth_and_assoc(sc, vap);
|
|
} else if (vap->iv_opmode == IEEE80211_M_MONITOR)
|
|
ieee80211_runtask(ic, &sc->sc_monitortask);
|
|
break;
|
|
case IEEE80211_S_ASSOC:
|
|
/*
|
|
* If we are transitioning from AUTH then just wait
|
|
* for the ASSOC status to come back from the firmware.
|
|
* Otherwise we need to issue the association request.
|
|
*/
|
|
if (vap->iv_state == IEEE80211_S_AUTH)
|
|
break;
|
|
iwi_auth_and_assoc(sc, vap);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
IWI_UNLOCK(sc);
|
|
IEEE80211_LOCK(ic);
|
|
return ivp->iwi_newstate(vap, nstate, arg);
|
|
}
|
|
|
|
/*
|
|
* WME parameters coming from IEEE 802.11e specification. These values are
|
|
* already declared in ieee80211_proto.c, but they are static so they can't
|
|
* be reused here.
|
|
*/
|
|
static const struct wmeParams iwi_wme_cck_params[WME_NUM_AC] = {
|
|
{ 0, 3, 5, 7, 0 }, /* WME_AC_BE */
|
|
{ 0, 3, 5, 10, 0 }, /* WME_AC_BK */
|
|
{ 0, 2, 4, 5, 188 }, /* WME_AC_VI */
|
|
{ 0, 2, 3, 4, 102 } /* WME_AC_VO */
|
|
};
|
|
|
|
static const struct wmeParams iwi_wme_ofdm_params[WME_NUM_AC] = {
|
|
{ 0, 3, 4, 6, 0 }, /* WME_AC_BE */
|
|
{ 0, 3, 4, 10, 0 }, /* WME_AC_BK */
|
|
{ 0, 2, 3, 4, 94 }, /* WME_AC_VI */
|
|
{ 0, 2, 2, 3, 47 } /* WME_AC_VO */
|
|
};
|
|
#define IWI_EXP2(v) htole16((1 << (v)) - 1)
|
|
#define IWI_USEC(v) htole16(IEEE80211_TXOP_TO_US(v))
|
|
|
|
static void
|
|
iwi_wme_init(struct iwi_softc *sc)
|
|
{
|
|
const struct wmeParams *wmep;
|
|
int ac;
|
|
|
|
memset(sc->wme, 0, sizeof sc->wme);
|
|
for (ac = 0; ac < WME_NUM_AC; ac++) {
|
|
/* set WME values for CCK modulation */
|
|
wmep = &iwi_wme_cck_params[ac];
|
|
sc->wme[1].aifsn[ac] = wmep->wmep_aifsn;
|
|
sc->wme[1].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
|
|
sc->wme[1].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
|
|
sc->wme[1].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
|
|
sc->wme[1].acm[ac] = wmep->wmep_acm;
|
|
|
|
/* set WME values for OFDM modulation */
|
|
wmep = &iwi_wme_ofdm_params[ac];
|
|
sc->wme[2].aifsn[ac] = wmep->wmep_aifsn;
|
|
sc->wme[2].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
|
|
sc->wme[2].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
|
|
sc->wme[2].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
|
|
sc->wme[2].acm[ac] = wmep->wmep_acm;
|
|
}
|
|
}
|
|
|
|
static int
|
|
iwi_wme_setparams(struct iwi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
const struct wmeParams *wmep;
|
|
int ac;
|
|
|
|
for (ac = 0; ac < WME_NUM_AC; ac++) {
|
|
/* set WME values for current operating mode */
|
|
wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
|
|
sc->wme[0].aifsn[ac] = wmep->wmep_aifsn;
|
|
sc->wme[0].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
|
|
sc->wme[0].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
|
|
sc->wme[0].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
|
|
sc->wme[0].acm[ac] = wmep->wmep_acm;
|
|
}
|
|
|
|
DPRINTF(("Setting WME parameters\n"));
|
|
return iwi_cmd(sc, IWI_CMD_SET_WME_PARAMS, sc->wme, sizeof sc->wme);
|
|
}
|
|
#undef IWI_USEC
|
|
#undef IWI_EXP2
|
|
|
|
static void
|
|
iwi_update_wme(void *arg, int npending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
(void) iwi_wme_setparams(sc);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
iwi_wme_update(struct ieee80211com *ic)
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
|
|
/*
|
|
* We may be called to update the WME parameters in
|
|
* the adapter at various places. If we're already
|
|
* associated then initiate the request immediately;
|
|
* otherwise we assume the params will get sent down
|
|
* to the adapter as part of the work iwi_auth_and_assoc
|
|
* does.
|
|
*/
|
|
if (vap->iv_state == IEEE80211_S_RUN)
|
|
ieee80211_runtask(ic, &sc->sc_wmetask);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
iwi_wme_setie(struct iwi_softc *sc)
|
|
{
|
|
struct ieee80211_wme_info wme;
|
|
|
|
memset(&wme, 0, sizeof wme);
|
|
wme.wme_id = IEEE80211_ELEMID_VENDOR;
|
|
wme.wme_len = sizeof (struct ieee80211_wme_info) - 2;
|
|
wme.wme_oui[0] = 0x00;
|
|
wme.wme_oui[1] = 0x50;
|
|
wme.wme_oui[2] = 0xf2;
|
|
wme.wme_type = WME_OUI_TYPE;
|
|
wme.wme_subtype = WME_INFO_OUI_SUBTYPE;
|
|
wme.wme_version = WME_VERSION;
|
|
wme.wme_info = 0;
|
|
|
|
DPRINTF(("Setting WME IE (len=%u)\n", wme.wme_len));
|
|
return iwi_cmd(sc, IWI_CMD_SET_WMEIE, &wme, sizeof wme);
|
|
}
|
|
|
|
/*
|
|
* Read 16 bits at address 'addr' from the serial EEPROM.
|
|
*/
|
|
static uint16_t
|
|
iwi_read_prom_word(struct iwi_softc *sc, uint8_t addr)
|
|
{
|
|
uint32_t tmp;
|
|
uint16_t val;
|
|
int n;
|
|
|
|
/* clock C once before the first command */
|
|
IWI_EEPROM_CTL(sc, 0);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
|
|
/* write start bit (1) */
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C);
|
|
|
|
/* write READ opcode (10) */
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
|
|
|
|
/* write address A7-A0 */
|
|
for (n = 7; n >= 0; n--) {
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S |
|
|
(((addr >> n) & 1) << IWI_EEPROM_SHIFT_D));
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S |
|
|
(((addr >> n) & 1) << IWI_EEPROM_SHIFT_D) | IWI_EEPROM_C);
|
|
}
|
|
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
|
|
/* read data Q15-Q0 */
|
|
val = 0;
|
|
for (n = 15; n >= 0; n--) {
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
tmp = MEM_READ_4(sc, IWI_MEM_EEPROM_CTL);
|
|
val |= ((tmp & IWI_EEPROM_Q) >> IWI_EEPROM_SHIFT_Q) << n;
|
|
}
|
|
|
|
IWI_EEPROM_CTL(sc, 0);
|
|
|
|
/* clear Chip Select and clock C */
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
|
|
IWI_EEPROM_CTL(sc, 0);
|
|
IWI_EEPROM_CTL(sc, IWI_EEPROM_C);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
iwi_setcurchan(struct iwi_softc *sc, int chan)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
sc->curchan = chan;
|
|
ieee80211_radiotap_chan_change(ic);
|
|
}
|
|
|
|
static void
|
|
iwi_frame_intr(struct iwi_softc *sc, struct iwi_rx_data *data, int i,
|
|
struct iwi_frame *frame)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct mbuf *mnew, *m;
|
|
struct ieee80211_node *ni;
|
|
int type, error, framelen;
|
|
int8_t rssi, nf;
|
|
IWI_LOCK_DECL;
|
|
|
|
framelen = le16toh(frame->len);
|
|
if (framelen < IEEE80211_MIN_LEN || framelen > MCLBYTES) {
|
|
/*
|
|
* XXX >MCLBYTES is bogus as it means the h/w dma'd
|
|
* out of bounds; need to figure out how to limit
|
|
* frame size in the firmware
|
|
*/
|
|
/* XXX stat */
|
|
DPRINTFN(1,
|
|
("drop rx frame len=%u chan=%u rssi=%u rssi_dbm=%u\n",
|
|
le16toh(frame->len), frame->chan, frame->rssi,
|
|
frame->rssi_dbm));
|
|
return;
|
|
}
|
|
|
|
DPRINTFN(5, ("received frame len=%u chan=%u rssi=%u rssi_dbm=%u\n",
|
|
le16toh(frame->len), frame->chan, frame->rssi, frame->rssi_dbm));
|
|
|
|
if (frame->chan != sc->curchan)
|
|
iwi_setcurchan(sc, frame->chan);
|
|
|
|
/*
|
|
* Try to allocate a new mbuf for this ring element and load it before
|
|
* processing the current mbuf. If the ring element cannot be loaded,
|
|
* drop the received packet and reuse the old mbuf. In the unlikely
|
|
* case that the old mbuf can't be reloaded either, explicitly panic.
|
|
*/
|
|
mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (mnew == NULL) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return;
|
|
}
|
|
|
|
bus_dmamap_unload(sc->rxq.data_dmat, data->map);
|
|
|
|
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
|
|
mtod(mnew, void *), MCLBYTES, iwi_dma_map_addr, &data->physaddr,
|
|
0);
|
|
if (error != 0) {
|
|
m_freem(mnew);
|
|
|
|
/* try to reload the old mbuf */
|
|
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
|
|
mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr,
|
|
&data->physaddr, 0);
|
|
if (error != 0) {
|
|
/* very unlikely that it will fail... */
|
|
panic("%s: could not load old rx mbuf",
|
|
device_get_name(sc->sc_dev));
|
|
}
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* New mbuf successfully loaded, update Rx ring and continue
|
|
* processing.
|
|
*/
|
|
m = data->m;
|
|
data->m = mnew;
|
|
CSR_WRITE_4(sc, data->reg, data->physaddr);
|
|
|
|
/* finalize mbuf */
|
|
m->m_pkthdr.len = m->m_len = sizeof (struct iwi_hdr) +
|
|
sizeof (struct iwi_frame) + framelen;
|
|
|
|
m_adj(m, sizeof (struct iwi_hdr) + sizeof (struct iwi_frame));
|
|
|
|
rssi = frame->rssi_dbm;
|
|
nf = -95;
|
|
if (ieee80211_radiotap_active(ic)) {
|
|
struct iwi_rx_radiotap_header *tap = &sc->sc_rxtap;
|
|
|
|
tap->wr_flags = 0;
|
|
tap->wr_antsignal = rssi;
|
|
tap->wr_antnoise = nf;
|
|
tap->wr_rate = iwi_cvtrate(frame->rate);
|
|
tap->wr_antenna = frame->antenna;
|
|
}
|
|
IWI_UNLOCK(sc);
|
|
|
|
ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *));
|
|
if (ni != NULL) {
|
|
type = ieee80211_input(ni, m, rssi, nf);
|
|
ieee80211_free_node(ni);
|
|
} else
|
|
type = ieee80211_input_all(ic, m, rssi, nf);
|
|
|
|
IWI_LOCK(sc);
|
|
if (sc->sc_softled) {
|
|
/*
|
|
* Blink for any data frame. Otherwise do a
|
|
* heartbeat-style blink when idle. The latter
|
|
* is mainly for station mode where we depend on
|
|
* periodic beacon frames to trigger the poll event.
|
|
*/
|
|
if (type == IEEE80211_FC0_TYPE_DATA) {
|
|
sc->sc_rxrate = frame->rate;
|
|
iwi_led_event(sc, IWI_LED_RX);
|
|
} else if (ticks - sc->sc_ledevent >= sc->sc_ledidle)
|
|
iwi_led_event(sc, IWI_LED_POLL);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check for an association response frame to see if QoS
|
|
* has been negotiated. We parse just enough to figure
|
|
* out if we're supposed to use QoS. The proper solution
|
|
* is to pass the frame up so ieee80211_input can do the
|
|
* work but that's made hard by how things currently are
|
|
* done in the driver.
|
|
*/
|
|
static void
|
|
iwi_checkforqos(struct ieee80211vap *vap,
|
|
const struct ieee80211_frame *wh, int len)
|
|
{
|
|
#define SUBTYPE(wh) ((wh)->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK)
|
|
const uint8_t *frm, *efrm, *wme;
|
|
struct ieee80211_node *ni;
|
|
uint16_t capinfo, status, associd;
|
|
|
|
/* NB: +8 for capinfo, status, associd, and first ie */
|
|
if (!(sizeof(*wh)+8 < len && len < IEEE80211_MAX_LEN) ||
|
|
SUBTYPE(wh) != IEEE80211_FC0_SUBTYPE_ASSOC_RESP)
|
|
return;
|
|
/*
|
|
* asresp frame format
|
|
* [2] capability information
|
|
* [2] status
|
|
* [2] association ID
|
|
* [tlv] supported rates
|
|
* [tlv] extended supported rates
|
|
* [tlv] WME
|
|
*/
|
|
frm = (const uint8_t *)&wh[1];
|
|
efrm = ((const uint8_t *) wh) + len;
|
|
|
|
capinfo = le16toh(*(const uint16_t *)frm);
|
|
frm += 2;
|
|
status = le16toh(*(const uint16_t *)frm);
|
|
frm += 2;
|
|
associd = le16toh(*(const uint16_t *)frm);
|
|
frm += 2;
|
|
|
|
wme = NULL;
|
|
while (efrm - frm > 1) {
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
|
|
switch (*frm) {
|
|
case IEEE80211_ELEMID_VENDOR:
|
|
if (iswmeoui(frm))
|
|
wme = frm;
|
|
break;
|
|
}
|
|
frm += frm[1] + 2;
|
|
}
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
ni->ni_capinfo = capinfo;
|
|
ni->ni_associd = associd & 0x3fff;
|
|
if (wme != NULL)
|
|
ni->ni_flags |= IEEE80211_NODE_QOS;
|
|
else
|
|
ni->ni_flags &= ~IEEE80211_NODE_QOS;
|
|
ieee80211_free_node(ni);
|
|
#undef SUBTYPE
|
|
}
|
|
|
|
static void
|
|
iwi_notif_link_quality(struct iwi_softc *sc, struct iwi_notif *notif)
|
|
{
|
|
struct iwi_notif_link_quality *lq;
|
|
int len;
|
|
|
|
len = le16toh(notif->len);
|
|
|
|
DPRINTFN(5, ("Notification (%u) - len=%d, sizeof=%zu\n",
|
|
notif->type,
|
|
len,
|
|
sizeof(struct iwi_notif_link_quality)
|
|
));
|
|
|
|
/* enforce length */
|
|
if (len != sizeof(struct iwi_notif_link_quality)) {
|
|
DPRINTFN(5, ("Notification: (%u) too short (%d)\n",
|
|
notif->type,
|
|
len));
|
|
return;
|
|
}
|
|
|
|
lq = (struct iwi_notif_link_quality *)(notif + 1);
|
|
memcpy(&sc->sc_linkqual, lq, sizeof(sc->sc_linkqual));
|
|
sc->sc_linkqual_valid = 1;
|
|
}
|
|
|
|
/*
|
|
* Task queue callbacks for iwi_notification_intr used to avoid LOR's.
|
|
*/
|
|
|
|
static void
|
|
iwi_notification_intr(struct iwi_softc *sc, struct iwi_notif *notif)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
struct iwi_notif_scan_channel *chan;
|
|
struct iwi_notif_scan_complete *scan;
|
|
struct iwi_notif_authentication *auth;
|
|
struct iwi_notif_association *assoc;
|
|
struct iwi_notif_beacon_state *beacon;
|
|
|
|
switch (notif->type) {
|
|
case IWI_NOTIF_TYPE_SCAN_CHANNEL:
|
|
chan = (struct iwi_notif_scan_channel *)(notif + 1);
|
|
|
|
DPRINTFN(3, ("Scan of channel %u complete (%u)\n",
|
|
ieee80211_ieee2mhz(chan->nchan, 0), chan->nchan));
|
|
|
|
/* Reset the timer, the scan is still going */
|
|
sc->sc_state_timer = 3;
|
|
break;
|
|
|
|
case IWI_NOTIF_TYPE_SCAN_COMPLETE:
|
|
scan = (struct iwi_notif_scan_complete *)(notif + 1);
|
|
|
|
DPRINTFN(2, ("Scan completed (%u, %u)\n", scan->nchan,
|
|
scan->status));
|
|
|
|
IWI_STATE_END(sc, IWI_FW_SCANNING);
|
|
|
|
/*
|
|
* Monitor mode works by doing a passive scan to set
|
|
* the channel and enable rx. Because we don't want
|
|
* to abort a scan lest the firmware crash we scan
|
|
* for a short period of time and automatically restart
|
|
* the scan when notified the sweep has completed.
|
|
*/
|
|
if (vap->iv_opmode == IEEE80211_M_MONITOR) {
|
|
ieee80211_runtask(ic, &sc->sc_monitortask);
|
|
break;
|
|
}
|
|
|
|
if (scan->status == IWI_SCAN_COMPLETED) {
|
|
/* NB: don't need to defer, net80211 does it for us */
|
|
ieee80211_scan_next(vap);
|
|
}
|
|
break;
|
|
|
|
case IWI_NOTIF_TYPE_AUTHENTICATION:
|
|
auth = (struct iwi_notif_authentication *)(notif + 1);
|
|
switch (auth->state) {
|
|
case IWI_AUTH_SUCCESS:
|
|
DPRINTFN(2, ("Authentication succeeeded\n"));
|
|
ieee80211_new_state(vap, IEEE80211_S_ASSOC, -1);
|
|
break;
|
|
case IWI_AUTH_FAIL:
|
|
/*
|
|
* These are delivered as an unsolicited deauth
|
|
* (e.g. due to inactivity) or in response to an
|
|
* associate request.
|
|
*/
|
|
sc->flags &= ~IWI_FLAG_ASSOCIATED;
|
|
if (vap->iv_state != IEEE80211_S_RUN) {
|
|
DPRINTFN(2, ("Authentication failed\n"));
|
|
vap->iv_stats.is_rx_auth_fail++;
|
|
IWI_STATE_END(sc, IWI_FW_ASSOCIATING);
|
|
} else {
|
|
DPRINTFN(2, ("Deauthenticated\n"));
|
|
vap->iv_stats.is_rx_deauth++;
|
|
}
|
|
ieee80211_new_state(vap, IEEE80211_S_SCAN, -1);
|
|
break;
|
|
case IWI_AUTH_SENT_1:
|
|
case IWI_AUTH_RECV_2:
|
|
case IWI_AUTH_SEQ1_PASS:
|
|
break;
|
|
case IWI_AUTH_SEQ1_FAIL:
|
|
DPRINTFN(2, ("Initial authentication handshake failed; "
|
|
"you probably need shared key\n"));
|
|
vap->iv_stats.is_rx_auth_fail++;
|
|
IWI_STATE_END(sc, IWI_FW_ASSOCIATING);
|
|
/* XXX retry shared key when in auto */
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev,
|
|
"unknown authentication state %u\n", auth->state);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case IWI_NOTIF_TYPE_ASSOCIATION:
|
|
assoc = (struct iwi_notif_association *)(notif + 1);
|
|
switch (assoc->state) {
|
|
case IWI_AUTH_SUCCESS:
|
|
/* re-association, do nothing */
|
|
break;
|
|
case IWI_ASSOC_SUCCESS:
|
|
DPRINTFN(2, ("Association succeeded\n"));
|
|
sc->flags |= IWI_FLAG_ASSOCIATED;
|
|
IWI_STATE_END(sc, IWI_FW_ASSOCIATING);
|
|
iwi_checkforqos(vap,
|
|
(const struct ieee80211_frame *)(assoc+1),
|
|
le16toh(notif->len) - sizeof(*assoc) - 1);
|
|
ieee80211_new_state(vap, IEEE80211_S_RUN, -1);
|
|
break;
|
|
case IWI_ASSOC_INIT:
|
|
sc->flags &= ~IWI_FLAG_ASSOCIATED;
|
|
switch (sc->fw_state) {
|
|
case IWI_FW_ASSOCIATING:
|
|
DPRINTFN(2, ("Association failed\n"));
|
|
IWI_STATE_END(sc, IWI_FW_ASSOCIATING);
|
|
ieee80211_new_state(vap, IEEE80211_S_SCAN, -1);
|
|
break;
|
|
|
|
case IWI_FW_DISASSOCIATING:
|
|
DPRINTFN(2, ("Dissassociated\n"));
|
|
IWI_STATE_END(sc, IWI_FW_DISASSOCIATING);
|
|
vap->iv_stats.is_rx_disassoc++;
|
|
ieee80211_new_state(vap, IEEE80211_S_SCAN, -1);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev,
|
|
"unknown association state %u\n", assoc->state);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case IWI_NOTIF_TYPE_BEACON:
|
|
/* XXX check struct length */
|
|
beacon = (struct iwi_notif_beacon_state *)(notif + 1);
|
|
|
|
DPRINTFN(5, ("Beacon state (%u, %u)\n",
|
|
beacon->state, le32toh(beacon->number)));
|
|
|
|
if (beacon->state == IWI_BEACON_MISS) {
|
|
/*
|
|
* The firmware notifies us of every beacon miss
|
|
* so we need to track the count against the
|
|
* configured threshold before notifying the
|
|
* 802.11 layer.
|
|
* XXX try to roam, drop assoc only on much higher count
|
|
*/
|
|
if (le32toh(beacon->number) >= vap->iv_bmissthreshold) {
|
|
DPRINTF(("Beacon miss: %u >= %u\n",
|
|
le32toh(beacon->number),
|
|
vap->iv_bmissthreshold));
|
|
vap->iv_stats.is_beacon_miss++;
|
|
/*
|
|
* It's pointless to notify the 802.11 layer
|
|
* as it'll try to send a probe request (which
|
|
* we'll discard) and then timeout and drop us
|
|
* into scan state. Instead tell the firmware
|
|
* to disassociate and then on completion we'll
|
|
* kick the state machine to scan.
|
|
*/
|
|
ieee80211_runtask(ic, &sc->sc_disassoctask);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case IWI_NOTIF_TYPE_CALIBRATION:
|
|
case IWI_NOTIF_TYPE_NOISE:
|
|
/* XXX handle? */
|
|
DPRINTFN(5, ("Notification (%u)\n", notif->type));
|
|
break;
|
|
case IWI_NOTIF_TYPE_LINK_QUALITY:
|
|
iwi_notif_link_quality(sc, notif);
|
|
break;
|
|
|
|
default:
|
|
DPRINTF(("unknown notification type %u flags 0x%x len %u\n",
|
|
notif->type, notif->flags, le16toh(notif->len)));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
iwi_rx_intr(struct iwi_softc *sc)
|
|
{
|
|
struct iwi_rx_data *data;
|
|
struct iwi_hdr *hdr;
|
|
uint32_t hw;
|
|
|
|
hw = CSR_READ_4(sc, IWI_CSR_RX_RIDX);
|
|
|
|
for (; sc->rxq.cur != hw;) {
|
|
data = &sc->rxq.data[sc->rxq.cur];
|
|
|
|
bus_dmamap_sync(sc->rxq.data_dmat, data->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
hdr = mtod(data->m, struct iwi_hdr *);
|
|
|
|
switch (hdr->type) {
|
|
case IWI_HDR_TYPE_FRAME:
|
|
iwi_frame_intr(sc, data, sc->rxq.cur,
|
|
(struct iwi_frame *)(hdr + 1));
|
|
break;
|
|
|
|
case IWI_HDR_TYPE_NOTIF:
|
|
iwi_notification_intr(sc,
|
|
(struct iwi_notif *)(hdr + 1));
|
|
break;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev, "unknown hdr type %u\n",
|
|
hdr->type);
|
|
}
|
|
|
|
DPRINTFN(15, ("rx done idx=%u\n", sc->rxq.cur));
|
|
|
|
sc->rxq.cur = (sc->rxq.cur + 1) % IWI_RX_RING_COUNT;
|
|
}
|
|
|
|
/* tell the firmware what we have processed */
|
|
hw = (hw == 0) ? IWI_RX_RING_COUNT - 1 : hw - 1;
|
|
CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, hw);
|
|
}
|
|
|
|
static void
|
|
iwi_tx_intr(struct iwi_softc *sc, struct iwi_tx_ring *txq)
|
|
{
|
|
struct iwi_tx_data *data;
|
|
uint32_t hw;
|
|
|
|
hw = CSR_READ_4(sc, txq->csr_ridx);
|
|
|
|
while (txq->next != hw) {
|
|
data = &txq->data[txq->next];
|
|
DPRINTFN(15, ("tx done idx=%u\n", txq->next));
|
|
bus_dmamap_sync(txq->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txq->data_dmat, data->map);
|
|
ieee80211_tx_complete(data->ni, data->m, 0);
|
|
data->ni = NULL;
|
|
data->m = NULL;
|
|
txq->queued--;
|
|
txq->next = (txq->next + 1) % IWI_TX_RING_COUNT;
|
|
}
|
|
sc->sc_tx_timer = 0;
|
|
if (sc->sc_softled)
|
|
iwi_led_event(sc, IWI_LED_TX);
|
|
iwi_start(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_fatal_error_intr(struct iwi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
|
|
device_printf(sc->sc_dev, "firmware error\n");
|
|
if (vap != NULL)
|
|
ieee80211_cancel_scan(vap);
|
|
ieee80211_runtask(ic, &sc->sc_restarttask);
|
|
|
|
sc->flags &= ~IWI_FLAG_BUSY;
|
|
sc->sc_busy_timer = 0;
|
|
wakeup(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_radio_off_intr(struct iwi_softc *sc)
|
|
{
|
|
|
|
ieee80211_runtask(&sc->sc_ic, &sc->sc_radiofftask);
|
|
}
|
|
|
|
static void
|
|
iwi_intr(void *arg)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
uint32_t r;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
|
|
if ((r = CSR_READ_4(sc, IWI_CSR_INTR)) == 0 || r == 0xffffffff) {
|
|
IWI_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* acknowledge interrupts */
|
|
CSR_WRITE_4(sc, IWI_CSR_INTR, r);
|
|
|
|
if (r & IWI_INTR_FATAL_ERROR) {
|
|
iwi_fatal_error_intr(sc);
|
|
goto done;
|
|
}
|
|
|
|
if (r & IWI_INTR_FW_INITED) {
|
|
if (!(r & (IWI_INTR_FATAL_ERROR | IWI_INTR_PARITY_ERROR)))
|
|
wakeup(sc);
|
|
}
|
|
|
|
if (r & IWI_INTR_RADIO_OFF)
|
|
iwi_radio_off_intr(sc);
|
|
|
|
if (r & IWI_INTR_CMD_DONE) {
|
|
sc->flags &= ~IWI_FLAG_BUSY;
|
|
sc->sc_busy_timer = 0;
|
|
wakeup(sc);
|
|
}
|
|
|
|
if (r & IWI_INTR_TX1_DONE)
|
|
iwi_tx_intr(sc, &sc->txq[0]);
|
|
|
|
if (r & IWI_INTR_TX2_DONE)
|
|
iwi_tx_intr(sc, &sc->txq[1]);
|
|
|
|
if (r & IWI_INTR_TX3_DONE)
|
|
iwi_tx_intr(sc, &sc->txq[2]);
|
|
|
|
if (r & IWI_INTR_TX4_DONE)
|
|
iwi_tx_intr(sc, &sc->txq[3]);
|
|
|
|
if (r & IWI_INTR_RX_DONE)
|
|
iwi_rx_intr(sc);
|
|
|
|
if (r & IWI_INTR_PARITY_ERROR) {
|
|
/* XXX rate-limit */
|
|
device_printf(sc->sc_dev, "parity error\n");
|
|
}
|
|
done:
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
iwi_cmd(struct iwi_softc *sc, uint8_t type, void *data, uint8_t len)
|
|
{
|
|
struct iwi_cmd_desc *desc;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
if (sc->flags & IWI_FLAG_BUSY) {
|
|
device_printf(sc->sc_dev, "%s: cmd %d not sent, busy\n",
|
|
__func__, type);
|
|
return EAGAIN;
|
|
}
|
|
sc->flags |= IWI_FLAG_BUSY;
|
|
sc->sc_busy_timer = 2;
|
|
|
|
desc = &sc->cmdq.desc[sc->cmdq.cur];
|
|
|
|
desc->hdr.type = IWI_HDR_TYPE_COMMAND;
|
|
desc->hdr.flags = IWI_HDR_FLAG_IRQ;
|
|
desc->type = type;
|
|
desc->len = len;
|
|
memcpy(desc->data, data, len);
|
|
|
|
bus_dmamap_sync(sc->cmdq.desc_dmat, sc->cmdq.desc_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
DPRINTFN(2, ("sending command idx=%u type=%u len=%u\n", sc->cmdq.cur,
|
|
type, len));
|
|
|
|
sc->cmdq.cur = (sc->cmdq.cur + 1) % IWI_CMD_RING_COUNT;
|
|
CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur);
|
|
|
|
return msleep(sc, &sc->sc_mtx, 0, "iwicmd", hz);
|
|
}
|
|
|
|
static void
|
|
iwi_write_ibssnode(struct iwi_softc *sc,
|
|
const u_int8_t addr[IEEE80211_ADDR_LEN], int entry)
|
|
{
|
|
struct iwi_ibssnode node;
|
|
|
|
/* write node information into NIC memory */
|
|
memset(&node, 0, sizeof node);
|
|
IEEE80211_ADDR_COPY(node.bssid, addr);
|
|
|
|
DPRINTF(("%s mac %6D station %u\n", __func__, node.bssid, ":", entry));
|
|
|
|
CSR_WRITE_REGION_1(sc,
|
|
IWI_CSR_NODE_BASE + entry * sizeof node,
|
|
(uint8_t *)&node, sizeof node);
|
|
}
|
|
|
|
static int
|
|
iwi_tx_start(struct iwi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
|
|
int ac)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct iwi_node *in = (struct iwi_node *)ni;
|
|
const struct ieee80211_frame *wh;
|
|
struct ieee80211_key *k;
|
|
const struct chanAccParams *cap;
|
|
struct iwi_tx_ring *txq = &sc->txq[ac];
|
|
struct iwi_tx_data *data;
|
|
struct iwi_tx_desc *desc;
|
|
struct mbuf *mnew;
|
|
bus_dma_segment_t segs[IWI_MAX_NSEG];
|
|
int error, nsegs, hdrlen, i;
|
|
int ismcast, flags, xflags, staid;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
wh = mtod(m0, const struct ieee80211_frame *);
|
|
/* NB: only data frames use this path */
|
|
hdrlen = ieee80211_hdrsize(wh);
|
|
ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1);
|
|
flags = xflags = 0;
|
|
|
|
if (!ismcast)
|
|
flags |= IWI_DATA_FLAG_NEED_ACK;
|
|
if (vap->iv_flags & IEEE80211_F_SHPREAMBLE)
|
|
flags |= IWI_DATA_FLAG_SHPREAMBLE;
|
|
if (IEEE80211_QOS_HAS_SEQ(wh)) {
|
|
xflags |= IWI_DATA_XFLAG_QOS;
|
|
cap = &ic->ic_wme.wme_chanParams;
|
|
if (!cap->cap_wmeParams[ac].wmep_noackPolicy)
|
|
flags &= ~IWI_DATA_FLAG_NEED_ACK;
|
|
}
|
|
|
|
/*
|
|
* This is only used in IBSS mode where the firmware expect an index
|
|
* in a h/w table instead of a destination address.
|
|
*/
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS) {
|
|
if (!ismcast) {
|
|
if (in->in_station == -1) {
|
|
in->in_station = alloc_unr(sc->sc_unr);
|
|
if (in->in_station == -1) {
|
|
/* h/w table is full */
|
|
if_inc_counter(ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
m_freem(m0);
|
|
ieee80211_free_node(ni);
|
|
return 0;
|
|
}
|
|
iwi_write_ibssnode(sc,
|
|
ni->ni_macaddr, in->in_station);
|
|
}
|
|
staid = in->in_station;
|
|
} else {
|
|
/*
|
|
* Multicast addresses have no associated node
|
|
* so there will be no station entry. We reserve
|
|
* entry 0 for one mcast address and use that.
|
|
* If there are many being used this will be
|
|
* expensive and we'll need to do a better job
|
|
* but for now this handles the broadcast case.
|
|
*/
|
|
if (!IEEE80211_ADDR_EQ(wh->i_addr1, sc->sc_mcast)) {
|
|
IEEE80211_ADDR_COPY(sc->sc_mcast, wh->i_addr1);
|
|
iwi_write_ibssnode(sc, sc->sc_mcast, 0);
|
|
}
|
|
staid = 0;
|
|
}
|
|
} else
|
|
staid = 0;
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
|
|
k = ieee80211_crypto_encap(ni, m0);
|
|
if (k == NULL) {
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* packet header may have moved, reset our local pointer */
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
}
|
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
|
struct iwi_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
|
|
ieee80211_radiotap_tx(vap, m0);
|
|
}
|
|
|
|
data = &txq->data[txq->cur];
|
|
desc = &txq->desc[txq->cur];
|
|
|
|
/* save and trim IEEE802.11 header */
|
|
m_copydata(m0, 0, hdrlen, (caddr_t)&desc->wh);
|
|
m_adj(m0, hdrlen);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs,
|
|
&nsegs, 0);
|
|
if (error != 0 && error != EFBIG) {
|
|
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
|
|
error);
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
if (error != 0) {
|
|
mnew = m_defrag(m0, M_NOWAIT);
|
|
if (mnew == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not defragment mbuf\n");
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
m0 = mnew;
|
|
|
|
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map,
|
|
m0, segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not map mbuf (error %d)\n", error);
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
data->m = m0;
|
|
data->ni = ni;
|
|
|
|
desc->hdr.type = IWI_HDR_TYPE_DATA;
|
|
desc->hdr.flags = IWI_HDR_FLAG_IRQ;
|
|
desc->station = staid;
|
|
desc->cmd = IWI_DATA_CMD_TX;
|
|
desc->len = htole16(m0->m_pkthdr.len);
|
|
desc->flags = flags;
|
|
desc->xflags = xflags;
|
|
|
|
#if 0
|
|
if (vap->iv_flags & IEEE80211_F_PRIVACY)
|
|
desc->wep_txkey = vap->iv_def_txkey;
|
|
else
|
|
#endif
|
|
desc->flags |= IWI_DATA_FLAG_NO_WEP;
|
|
|
|
desc->nseg = htole32(nsegs);
|
|
for (i = 0; i < nsegs; i++) {
|
|
desc->seg_addr[i] = htole32(segs[i].ds_addr);
|
|
desc->seg_len[i] = htole16(segs[i].ds_len);
|
|
}
|
|
|
|
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
DPRINTFN(5, ("sending data frame txq=%u idx=%u len=%u nseg=%u\n",
|
|
ac, txq->cur, le16toh(desc->len), nsegs));
|
|
|
|
txq->queued++;
|
|
txq->cur = (txq->cur + 1) % IWI_TX_RING_COUNT;
|
|
CSR_WRITE_4(sc, txq->csr_widx, txq->cur);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
iwi_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
|
|
const struct ieee80211_bpf_params *params)
|
|
{
|
|
/* no support; just discard */
|
|
m_freem(m);
|
|
ieee80211_free_node(ni);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
iwi_transmit(struct ieee80211com *ic, struct mbuf *m)
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
int error;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
if (!sc->sc_running) {
|
|
IWI_UNLOCK(sc);
|
|
return (ENXIO);
|
|
}
|
|
error = mbufq_enqueue(&sc->sc_snd, m);
|
|
if (error) {
|
|
IWI_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
iwi_start(sc);
|
|
IWI_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
iwi_start(struct iwi_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ieee80211_node *ni;
|
|
int ac;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
|
|
ac = M_WME_GETAC(m);
|
|
if (sc->txq[ac].queued > IWI_TX_RING_COUNT - 8) {
|
|
/* there is no place left in this ring; tail drop */
|
|
/* XXX tail drop */
|
|
mbufq_prepend(&sc->sc_snd, m);
|
|
break;
|
|
}
|
|
ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
|
|
if (iwi_tx_start(sc, m, ni, ac) != 0) {
|
|
ieee80211_free_node(ni);
|
|
if_inc_counter(ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
break;
|
|
}
|
|
sc->sc_tx_timer = 5;
|
|
}
|
|
}
|
|
|
|
static void
|
|
iwi_watchdog(void *arg)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
if (sc->sc_tx_timer > 0) {
|
|
if (--sc->sc_tx_timer == 0) {
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
counter_u64_add(ic->ic_oerrors, 1);
|
|
ieee80211_runtask(ic, &sc->sc_restarttask);
|
|
}
|
|
}
|
|
if (sc->sc_state_timer > 0) {
|
|
if (--sc->sc_state_timer == 0) {
|
|
device_printf(sc->sc_dev,
|
|
"firmware stuck in state %d, resetting\n",
|
|
sc->fw_state);
|
|
if (sc->fw_state == IWI_FW_SCANNING)
|
|
ieee80211_cancel_scan(TAILQ_FIRST(&ic->ic_vaps));
|
|
ieee80211_runtask(ic, &sc->sc_restarttask);
|
|
sc->sc_state_timer = 3;
|
|
}
|
|
}
|
|
if (sc->sc_busy_timer > 0) {
|
|
if (--sc->sc_busy_timer == 0) {
|
|
device_printf(sc->sc_dev,
|
|
"firmware command timeout, resetting\n");
|
|
ieee80211_runtask(ic, &sc->sc_restarttask);
|
|
}
|
|
}
|
|
callout_reset(&sc->sc_wdtimer, hz, iwi_watchdog, sc);
|
|
}
|
|
|
|
static void
|
|
iwi_parent(struct ieee80211com *ic)
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
int startall = 0;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
if (ic->ic_nrunning > 0) {
|
|
if (!sc->sc_running) {
|
|
iwi_init_locked(sc);
|
|
startall = 1;
|
|
}
|
|
} else if (sc->sc_running)
|
|
iwi_stop_locked(sc);
|
|
IWI_UNLOCK(sc);
|
|
if (startall)
|
|
ieee80211_start_all(ic);
|
|
}
|
|
|
|
static int
|
|
iwi_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
|
|
{
|
|
struct ifreq *ifr = data;
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
int error;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
switch (cmd) {
|
|
case SIOCGIWISTATS:
|
|
/* XXX validate permissions/memory/etc? */
|
|
error = copyout(&sc->sc_linkqual, ifr->ifr_data,
|
|
sizeof(struct iwi_notif_link_quality));
|
|
break;
|
|
case SIOCZIWISTATS:
|
|
memset(&sc->sc_linkqual, 0,
|
|
sizeof(struct iwi_notif_link_quality));
|
|
error = 0;
|
|
break;
|
|
default:
|
|
error = ENOTTY;
|
|
break;
|
|
}
|
|
IWI_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
iwi_stop_master(struct iwi_softc *sc)
|
|
{
|
|
uint32_t tmp;
|
|
int ntries;
|
|
|
|
/* disable interrupts */
|
|
CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, 0);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_STOP_MASTER);
|
|
for (ntries = 0; ntries < 5; ntries++) {
|
|
if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
if (ntries == 5)
|
|
device_printf(sc->sc_dev, "timeout waiting for master\n");
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_RST);
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_PRINCETON_RESET);
|
|
|
|
sc->flags &= ~IWI_FLAG_FW_INITED;
|
|
}
|
|
|
|
static int
|
|
iwi_reset(struct iwi_softc *sc)
|
|
{
|
|
uint32_t tmp;
|
|
int i, ntries;
|
|
|
|
iwi_stop_master(sc);
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
|
|
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_READ_INT, IWI_READ_INT_INIT_HOST);
|
|
|
|
/* wait for clock stabilization */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (CSR_READ_4(sc, IWI_CSR_CTL) & IWI_CTL_CLOCK_READY)
|
|
break;
|
|
DELAY(200);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for clock stabilization\n");
|
|
return EIO;
|
|
}
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_RST);
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_SOFT_RESET);
|
|
|
|
DELAY(10);
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
|
|
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT);
|
|
|
|
/* clear NIC memory */
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0);
|
|
for (i = 0; i < 0xc000; i++)
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iwi_firmware_ohdr *
|
|
iwi_setup_ofw(struct iwi_softc *sc, struct iwi_fw *fw)
|
|
{
|
|
const struct firmware *fp = fw->fp;
|
|
const struct iwi_firmware_ohdr *hdr;
|
|
|
|
if (fp->datasize < sizeof (struct iwi_firmware_ohdr)) {
|
|
device_printf(sc->sc_dev, "image '%s' too small\n", fp->name);
|
|
return NULL;
|
|
}
|
|
hdr = (const struct iwi_firmware_ohdr *)fp->data;
|
|
if ((IWI_FW_GET_MAJOR(le32toh(hdr->version)) != IWI_FW_REQ_MAJOR) ||
|
|
(IWI_FW_GET_MINOR(le32toh(hdr->version)) != IWI_FW_REQ_MINOR)) {
|
|
device_printf(sc->sc_dev, "version for '%s' %d.%d != %d.%d\n",
|
|
fp->name, IWI_FW_GET_MAJOR(le32toh(hdr->version)),
|
|
IWI_FW_GET_MINOR(le32toh(hdr->version)), IWI_FW_REQ_MAJOR,
|
|
IWI_FW_REQ_MINOR);
|
|
return NULL;
|
|
}
|
|
fw->data = ((const char *) fp->data) + sizeof(struct iwi_firmware_ohdr);
|
|
fw->size = fp->datasize - sizeof(struct iwi_firmware_ohdr);
|
|
fw->name = fp->name;
|
|
return hdr;
|
|
}
|
|
|
|
static const struct iwi_firmware_ohdr *
|
|
iwi_setup_oucode(struct iwi_softc *sc, struct iwi_fw *fw)
|
|
{
|
|
const struct iwi_firmware_ohdr *hdr;
|
|
|
|
hdr = iwi_setup_ofw(sc, fw);
|
|
if (hdr != NULL && le32toh(hdr->mode) != IWI_FW_MODE_UCODE) {
|
|
device_printf(sc->sc_dev, "%s is not a ucode image\n",
|
|
fw->name);
|
|
hdr = NULL;
|
|
}
|
|
return hdr;
|
|
}
|
|
|
|
static void
|
|
iwi_getfw(struct iwi_fw *fw, const char *fwname,
|
|
struct iwi_fw *uc, const char *ucname)
|
|
{
|
|
if (fw->fp == NULL)
|
|
fw->fp = firmware_get(fwname);
|
|
/* NB: pre-3.0 ucode is packaged separately */
|
|
if (uc->fp == NULL && fw->fp != NULL && fw->fp->version < 300)
|
|
uc->fp = firmware_get(ucname);
|
|
}
|
|
|
|
/*
|
|
* Get the required firmware images if not already loaded.
|
|
* Note that we hold firmware images so long as the device
|
|
* is marked up in case we need to reload them on device init.
|
|
* This is necessary because we re-init the device sometimes
|
|
* from a context where we cannot read from the filesystem
|
|
* (e.g. from the taskqueue thread when rfkill is re-enabled).
|
|
* XXX return 0 on success, 1 on error.
|
|
*
|
|
* NB: the order of get'ing and put'ing images here is
|
|
* intentional to support handling firmware images bundled
|
|
* by operating mode and/or all together in one file with
|
|
* the boot firmware as "master".
|
|
*/
|
|
static int
|
|
iwi_get_firmware(struct iwi_softc *sc, enum ieee80211_opmode opmode)
|
|
{
|
|
const struct iwi_firmware_hdr *hdr;
|
|
const struct firmware *fp;
|
|
|
|
/* invalidate cached firmware on mode change */
|
|
if (sc->fw_mode != opmode)
|
|
iwi_put_firmware(sc);
|
|
|
|
switch (opmode) {
|
|
case IEEE80211_M_STA:
|
|
iwi_getfw(&sc->fw_fw, "iwi_bss", &sc->fw_uc, "iwi_ucode_bss");
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
iwi_getfw(&sc->fw_fw, "iwi_ibss", &sc->fw_uc, "iwi_ucode_ibss");
|
|
break;
|
|
case IEEE80211_M_MONITOR:
|
|
iwi_getfw(&sc->fw_fw, "iwi_monitor",
|
|
&sc->fw_uc, "iwi_ucode_monitor");
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "unknown opmode %d\n", opmode);
|
|
return EINVAL;
|
|
}
|
|
fp = sc->fw_fw.fp;
|
|
if (fp == NULL) {
|
|
device_printf(sc->sc_dev, "could not load firmware\n");
|
|
goto bad;
|
|
}
|
|
if (fp->version < 300) {
|
|
/*
|
|
* Firmware prior to 3.0 was packaged as separate
|
|
* boot, firmware, and ucode images. Verify the
|
|
* ucode image was read in, retrieve the boot image
|
|
* if needed, and check version stamps for consistency.
|
|
* The version stamps in the data are also checked
|
|
* above; this is a bit paranoid but is a cheap
|
|
* safeguard against mis-packaging.
|
|
*/
|
|
if (sc->fw_uc.fp == NULL) {
|
|
device_printf(sc->sc_dev, "could not load ucode\n");
|
|
goto bad;
|
|
}
|
|
if (sc->fw_boot.fp == NULL) {
|
|
sc->fw_boot.fp = firmware_get("iwi_boot");
|
|
if (sc->fw_boot.fp == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load boot firmware\n");
|
|
goto bad;
|
|
}
|
|
}
|
|
if (sc->fw_boot.fp->version != sc->fw_fw.fp->version ||
|
|
sc->fw_boot.fp->version != sc->fw_uc.fp->version) {
|
|
device_printf(sc->sc_dev,
|
|
"firmware version mismatch: "
|
|
"'%s' is %d, '%s' is %d, '%s' is %d\n",
|
|
sc->fw_boot.fp->name, sc->fw_boot.fp->version,
|
|
sc->fw_uc.fp->name, sc->fw_uc.fp->version,
|
|
sc->fw_fw.fp->name, sc->fw_fw.fp->version
|
|
);
|
|
goto bad;
|
|
}
|
|
/*
|
|
* Check and setup each image.
|
|
*/
|
|
if (iwi_setup_oucode(sc, &sc->fw_uc) == NULL ||
|
|
iwi_setup_ofw(sc, &sc->fw_boot) == NULL ||
|
|
iwi_setup_ofw(sc, &sc->fw_fw) == NULL)
|
|
goto bad;
|
|
} else {
|
|
/*
|
|
* Check and setup combined image.
|
|
*/
|
|
if (fp->datasize < sizeof(struct iwi_firmware_hdr)) {
|
|
device_printf(sc->sc_dev, "image '%s' too small\n",
|
|
fp->name);
|
|
goto bad;
|
|
}
|
|
hdr = (const struct iwi_firmware_hdr *)fp->data;
|
|
if (fp->datasize < sizeof(*hdr) + le32toh(hdr->bsize) + le32toh(hdr->usize)
|
|
+ le32toh(hdr->fsize)) {
|
|
device_printf(sc->sc_dev, "image '%s' too small (2)\n",
|
|
fp->name);
|
|
goto bad;
|
|
}
|
|
sc->fw_boot.data = ((const char *) fp->data) + sizeof(*hdr);
|
|
sc->fw_boot.size = le32toh(hdr->bsize);
|
|
sc->fw_boot.name = fp->name;
|
|
sc->fw_uc.data = sc->fw_boot.data + sc->fw_boot.size;
|
|
sc->fw_uc.size = le32toh(hdr->usize);
|
|
sc->fw_uc.name = fp->name;
|
|
sc->fw_fw.data = sc->fw_uc.data + sc->fw_uc.size;
|
|
sc->fw_fw.size = le32toh(hdr->fsize);
|
|
sc->fw_fw.name = fp->name;
|
|
}
|
|
#if 0
|
|
device_printf(sc->sc_dev, "boot %d ucode %d fw %d bytes\n",
|
|
sc->fw_boot.size, sc->fw_uc.size, sc->fw_fw.size);
|
|
#endif
|
|
|
|
sc->fw_mode = opmode;
|
|
return 0;
|
|
bad:
|
|
iwi_put_firmware(sc);
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
iwi_put_fw(struct iwi_fw *fw)
|
|
{
|
|
if (fw->fp != NULL) {
|
|
firmware_put(fw->fp, FIRMWARE_UNLOAD);
|
|
fw->fp = NULL;
|
|
}
|
|
fw->data = NULL;
|
|
fw->size = 0;
|
|
fw->name = NULL;
|
|
}
|
|
|
|
/*
|
|
* Release any cached firmware images.
|
|
*/
|
|
static void
|
|
iwi_put_firmware(struct iwi_softc *sc)
|
|
{
|
|
iwi_put_fw(&sc->fw_uc);
|
|
iwi_put_fw(&sc->fw_fw);
|
|
iwi_put_fw(&sc->fw_boot);
|
|
}
|
|
|
|
static int
|
|
iwi_load_ucode(struct iwi_softc *sc, const struct iwi_fw *fw)
|
|
{
|
|
uint32_t tmp;
|
|
const uint16_t *w;
|
|
const char *uc = fw->data;
|
|
size_t size = fw->size;
|
|
int i, ntries, error;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
error = 0;
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, CSR_READ_4(sc, IWI_CSR_RST) |
|
|
IWI_RST_STOP_MASTER);
|
|
for (ntries = 0; ntries < 5; ntries++) {
|
|
if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
if (ntries == 5) {
|
|
device_printf(sc->sc_dev, "timeout waiting for master\n");
|
|
error = EIO;
|
|
goto fail;
|
|
}
|
|
|
|
MEM_WRITE_4(sc, 0x3000e0, 0x80000000);
|
|
DELAY(5000);
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_RST);
|
|
tmp &= ~IWI_RST_PRINCETON_RESET;
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, tmp);
|
|
|
|
DELAY(5000);
|
|
MEM_WRITE_4(sc, 0x3000e0, 0);
|
|
DELAY(1000);
|
|
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 1);
|
|
DELAY(1000);
|
|
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 0);
|
|
DELAY(1000);
|
|
MEM_WRITE_1(sc, 0x200000, 0x00);
|
|
MEM_WRITE_1(sc, 0x200000, 0x40);
|
|
DELAY(1000);
|
|
|
|
/* write microcode into adapter memory */
|
|
for (w = (const uint16_t *)uc; size > 0; w++, size -= 2)
|
|
MEM_WRITE_2(sc, 0x200010, htole16(*w));
|
|
|
|
MEM_WRITE_1(sc, 0x200000, 0x00);
|
|
MEM_WRITE_1(sc, 0x200000, 0x80);
|
|
|
|
/* wait until we get an answer */
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
if (MEM_READ_1(sc, 0x200000) & 1)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for ucode to initialize\n");
|
|
error = EIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* read the answer or the firmware will not initialize properly */
|
|
for (i = 0; i < 7; i++)
|
|
MEM_READ_4(sc, 0x200004);
|
|
|
|
MEM_WRITE_1(sc, 0x200000, 0x00);
|
|
|
|
fail:
|
|
return error;
|
|
}
|
|
|
|
/* macro to handle unaligned little endian data in firmware image */
|
|
#define GETLE32(p) ((p)[0] | (p)[1] << 8 | (p)[2] << 16 | (p)[3] << 24)
|
|
|
|
static int
|
|
iwi_load_firmware(struct iwi_softc *sc, const struct iwi_fw *fw)
|
|
{
|
|
u_char *p, *end;
|
|
uint32_t sentinel, ctl, src, dst, sum, len, mlen, tmp;
|
|
int ntries, error;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
/* copy firmware image to DMA memory */
|
|
memcpy(sc->fw_virtaddr, fw->data, fw->size);
|
|
|
|
/* make sure the adapter will get up-to-date values */
|
|
bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* tell the adapter where the command blocks are stored */
|
|
MEM_WRITE_4(sc, 0x3000a0, 0x27000);
|
|
|
|
/*
|
|
* Store command blocks into adapter's internal memory using register
|
|
* indirections. The adapter will read the firmware image through DMA
|
|
* using information stored in command blocks.
|
|
*/
|
|
src = sc->fw_physaddr;
|
|
p = sc->fw_virtaddr;
|
|
end = p + fw->size;
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0x27000);
|
|
|
|
while (p < end) {
|
|
dst = GETLE32(p); p += 4; src += 4;
|
|
len = GETLE32(p); p += 4; src += 4;
|
|
p += len;
|
|
|
|
while (len > 0) {
|
|
mlen = min(len, IWI_CB_MAXDATALEN);
|
|
|
|
ctl = IWI_CB_DEFAULT_CTL | mlen;
|
|
sum = ctl ^ src ^ dst;
|
|
|
|
/* write a command block */
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, ctl);
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, src);
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, dst);
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, sum);
|
|
|
|
src += mlen;
|
|
dst += mlen;
|
|
len -= mlen;
|
|
}
|
|
}
|
|
|
|
/* write a fictive final command block (sentinel) */
|
|
sentinel = CSR_READ_4(sc, IWI_CSR_AUTOINC_ADDR);
|
|
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0);
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_RST);
|
|
tmp &= ~(IWI_RST_MASTER_DISABLED | IWI_RST_STOP_MASTER);
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, tmp);
|
|
|
|
/* tell the adapter to start processing command blocks */
|
|
MEM_WRITE_4(sc, 0x3000a4, 0x540100);
|
|
|
|
/* wait until the adapter reaches the sentinel */
|
|
for (ntries = 0; ntries < 400; ntries++) {
|
|
if (MEM_READ_4(sc, 0x3000d0) >= sentinel)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
/* sync dma, just in case */
|
|
bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_POSTWRITE);
|
|
if (ntries == 400) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout processing command blocks for %s firmware\n",
|
|
fw->name);
|
|
return EIO;
|
|
}
|
|
|
|
/* we're done with command blocks processing */
|
|
MEM_WRITE_4(sc, 0x3000a4, 0x540c00);
|
|
|
|
/* allow interrupts so we know when the firmware is ready */
|
|
CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, IWI_INTR_MASK);
|
|
|
|
/* tell the adapter to initialize the firmware */
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, 0);
|
|
|
|
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
|
|
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_ALLOW_STANDBY);
|
|
|
|
/* wait at most one second for firmware initialization to complete */
|
|
if ((error = msleep(sc, &sc->sc_mtx, 0, "iwiinit", hz)) != 0) {
|
|
device_printf(sc->sc_dev, "timeout waiting for %s firmware "
|
|
"initialization to complete\n", fw->name);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
iwi_setpowermode(struct iwi_softc *sc, struct ieee80211vap *vap)
|
|
{
|
|
uint32_t data;
|
|
|
|
if (vap->iv_flags & IEEE80211_F_PMGTON) {
|
|
/* XXX set more fine-grained operation */
|
|
data = htole32(IWI_POWER_MODE_MAX);
|
|
} else
|
|
data = htole32(IWI_POWER_MODE_CAM);
|
|
|
|
DPRINTF(("Setting power mode to %u\n", le32toh(data)));
|
|
return iwi_cmd(sc, IWI_CMD_SET_POWER_MODE, &data, sizeof data);
|
|
}
|
|
|
|
static int
|
|
iwi_setwepkeys(struct iwi_softc *sc, struct ieee80211vap *vap)
|
|
{
|
|
struct iwi_wep_key wepkey;
|
|
struct ieee80211_key *wk;
|
|
int error, i;
|
|
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
wk = &vap->iv_nw_keys[i];
|
|
|
|
wepkey.cmd = IWI_WEP_KEY_CMD_SETKEY;
|
|
wepkey.idx = i;
|
|
wepkey.len = wk->wk_keylen;
|
|
memset(wepkey.key, 0, sizeof wepkey.key);
|
|
memcpy(wepkey.key, wk->wk_key, wk->wk_keylen);
|
|
DPRINTF(("Setting wep key index %u len %u\n", wepkey.idx,
|
|
wepkey.len));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_WEP_KEY, &wepkey,
|
|
sizeof wepkey);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
iwi_config(struct iwi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct iwi_configuration config;
|
|
struct iwi_rateset rs;
|
|
struct iwi_txpower power;
|
|
uint32_t data;
|
|
int error, i;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
DPRINTF(("Setting MAC address to %6D\n", ic->ic_macaddr, ":"));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_MAC_ADDRESS, ic->ic_macaddr,
|
|
IEEE80211_ADDR_LEN);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
memset(&config, 0, sizeof config);
|
|
config.bluetooth_coexistence = sc->bluetooth;
|
|
config.silence_threshold = 0x1e;
|
|
config.antenna = sc->antenna;
|
|
config.multicast_enabled = 1;
|
|
config.answer_pbreq = (ic->ic_opmode == IEEE80211_M_IBSS) ? 1 : 0;
|
|
config.disable_unicast_decryption = 1;
|
|
config.disable_multicast_decryption = 1;
|
|
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
|
|
config.allow_invalid_frames = 1;
|
|
config.allow_beacon_and_probe_resp = 1;
|
|
config.allow_mgt = 1;
|
|
}
|
|
DPRINTF(("Configuring adapter\n"));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config);
|
|
if (error != 0)
|
|
return error;
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS) {
|
|
power.mode = IWI_MODE_11B;
|
|
power.nchan = 11;
|
|
for (i = 0; i < 11; i++) {
|
|
power.chan[i].chan = i + 1;
|
|
power.chan[i].power = IWI_TXPOWER_MAX;
|
|
}
|
|
DPRINTF(("Setting .11b channels tx power\n"));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
power.mode = IWI_MODE_11G;
|
|
DPRINTF(("Setting .11g channels tx power\n"));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
memset(&rs, 0, sizeof rs);
|
|
rs.mode = IWI_MODE_11G;
|
|
rs.type = IWI_RATESET_TYPE_SUPPORTED;
|
|
rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11G].rs_nrates;
|
|
memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11G].rs_rates,
|
|
rs.nrates);
|
|
DPRINTF(("Setting .11bg supported rates (%u)\n", rs.nrates));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
memset(&rs, 0, sizeof rs);
|
|
rs.mode = IWI_MODE_11A;
|
|
rs.type = IWI_RATESET_TYPE_SUPPORTED;
|
|
rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11A].rs_nrates;
|
|
memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11A].rs_rates,
|
|
rs.nrates);
|
|
DPRINTF(("Setting .11a supported rates (%u)\n", rs.nrates));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
data = htole32(arc4random());
|
|
DPRINTF(("Setting initialization vector to %u\n", le32toh(data)));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_IV, &data, sizeof data);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
/* enable adapter */
|
|
DPRINTF(("Enabling adapter\n"));
|
|
return iwi_cmd(sc, IWI_CMD_ENABLE, NULL, 0);
|
|
}
|
|
|
|
static __inline void
|
|
set_scan_type(struct iwi_scan_ext *scan, int ix, int scan_type)
|
|
{
|
|
uint8_t *st = &scan->scan_type[ix / 2];
|
|
if (ix % 2)
|
|
*st = (*st & 0xf0) | ((scan_type & 0xf) << 0);
|
|
else
|
|
*st = (*st & 0x0f) | ((scan_type & 0xf) << 4);
|
|
}
|
|
|
|
static int
|
|
scan_type(const struct ieee80211_scan_state *ss,
|
|
const struct ieee80211_channel *chan)
|
|
{
|
|
/* We can only set one essid for a directed scan */
|
|
if (ss->ss_nssid != 0)
|
|
return IWI_SCAN_TYPE_BDIRECTED;
|
|
if ((ss->ss_flags & IEEE80211_SCAN_ACTIVE) &&
|
|
(chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0)
|
|
return IWI_SCAN_TYPE_BROADCAST;
|
|
return IWI_SCAN_TYPE_PASSIVE;
|
|
}
|
|
|
|
static __inline int
|
|
scan_band(const struct ieee80211_channel *c)
|
|
{
|
|
return IEEE80211_IS_CHAN_5GHZ(c) ? IWI_CHAN_5GHZ : IWI_CHAN_2GHZ;
|
|
}
|
|
|
|
static void
|
|
iwi_monitor_scan(void *arg, int npending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
(void) iwi_scanchan(sc, 2000, 0);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Start a scan on the current channel or all channels.
|
|
*/
|
|
static int
|
|
iwi_scanchan(struct iwi_softc *sc, unsigned long maxdwell, int allchan)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_channel *chan;
|
|
struct ieee80211_scan_state *ss;
|
|
struct iwi_scan_ext scan;
|
|
int error = 0;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
if (sc->fw_state == IWI_FW_SCANNING) {
|
|
/*
|
|
* This should not happen as we only trigger scan_next after
|
|
* completion
|
|
*/
|
|
DPRINTF(("%s: called too early - still scanning\n", __func__));
|
|
return (EBUSY);
|
|
}
|
|
IWI_STATE_BEGIN(sc, IWI_FW_SCANNING);
|
|
|
|
ss = ic->ic_scan;
|
|
|
|
memset(&scan, 0, sizeof scan);
|
|
scan.full_scan_index = htole32(++sc->sc_scangen);
|
|
scan.dwell_time[IWI_SCAN_TYPE_PASSIVE] = htole16(maxdwell);
|
|
if (ic->ic_flags_ext & IEEE80211_FEXT_BGSCAN) {
|
|
/*
|
|
* Use very short dwell times for when we send probe request
|
|
* frames. Without this bg scans hang. Ideally this should
|
|
* be handled with early-termination as done by net80211 but
|
|
* that's not feasible (aborting a scan is problematic).
|
|
*/
|
|
scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(30);
|
|
scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(30);
|
|
} else {
|
|
scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(maxdwell);
|
|
scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(maxdwell);
|
|
}
|
|
|
|
/* We can only set one essid for a directed scan */
|
|
if (ss->ss_nssid != 0) {
|
|
error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ss->ss_ssid[0].ssid,
|
|
ss->ss_ssid[0].len);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
|
|
if (allchan) {
|
|
int i, next, band, b, bstart;
|
|
/*
|
|
* Convert scan list to run-length encoded channel list
|
|
* the firmware requires (preserving the order setup by
|
|
* net80211). The first entry in each run specifies the
|
|
* band and the count of items in the run.
|
|
*/
|
|
next = 0; /* next open slot */
|
|
bstart = 0; /* NB: not needed, silence compiler */
|
|
band = -1; /* NB: impossible value */
|
|
KASSERT(ss->ss_last > 0, ("no channels"));
|
|
for (i = 0; i < ss->ss_last; i++) {
|
|
chan = ss->ss_chans[i];
|
|
b = scan_band(chan);
|
|
if (b != band) {
|
|
if (band != -1)
|
|
scan.channels[bstart] =
|
|
(next - bstart) | band;
|
|
/* NB: this allocates a slot for the run-len */
|
|
band = b, bstart = next++;
|
|
}
|
|
if (next >= IWI_SCAN_CHANNELS) {
|
|
DPRINTF(("truncating scan list\n"));
|
|
break;
|
|
}
|
|
scan.channels[next] = ieee80211_chan2ieee(ic, chan);
|
|
set_scan_type(&scan, next, scan_type(ss, chan));
|
|
next++;
|
|
}
|
|
scan.channels[bstart] = (next - bstart) | band;
|
|
} else {
|
|
/* Scan the current channel only */
|
|
chan = ic->ic_curchan;
|
|
scan.channels[0] = 1 | scan_band(chan);
|
|
scan.channels[1] = ieee80211_chan2ieee(ic, chan);
|
|
set_scan_type(&scan, 1, scan_type(ss, chan));
|
|
}
|
|
#ifdef IWI_DEBUG
|
|
if (iwi_debug > 0) {
|
|
static const char *scantype[8] =
|
|
{ "PSTOP", "PASV", "DIR", "BCAST", "BDIR", "5", "6", "7" };
|
|
int i;
|
|
printf("Scan request: index %u dwell %d/%d/%d\n"
|
|
, le32toh(scan.full_scan_index)
|
|
, le16toh(scan.dwell_time[IWI_SCAN_TYPE_PASSIVE])
|
|
, le16toh(scan.dwell_time[IWI_SCAN_TYPE_BROADCAST])
|
|
, le16toh(scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED])
|
|
);
|
|
i = 0;
|
|
do {
|
|
int run = scan.channels[i];
|
|
if (run == 0)
|
|
break;
|
|
printf("Scan %d %s channels:", run & 0x3f,
|
|
run & IWI_CHAN_2GHZ ? "2.4GHz" : "5GHz");
|
|
for (run &= 0x3f, i++; run > 0; run--, i++) {
|
|
uint8_t type = scan.scan_type[i/2];
|
|
printf(" %u/%s", scan.channels[i],
|
|
scantype[(i & 1 ? type : type>>4) & 7]);
|
|
}
|
|
printf("\n");
|
|
} while (i < IWI_SCAN_CHANNELS);
|
|
}
|
|
#endif
|
|
|
|
return (iwi_cmd(sc, IWI_CMD_SCAN_EXT, &scan, sizeof scan));
|
|
}
|
|
|
|
static int
|
|
iwi_set_sensitivity(struct iwi_softc *sc, int8_t rssi_dbm)
|
|
{
|
|
struct iwi_sensitivity sens;
|
|
|
|
DPRINTF(("Setting sensitivity to %d\n", rssi_dbm));
|
|
|
|
memset(&sens, 0, sizeof sens);
|
|
sens.rssi = htole16(rssi_dbm);
|
|
return iwi_cmd(sc, IWI_CMD_SET_SENSITIVITY, &sens, sizeof sens);
|
|
}
|
|
|
|
static int
|
|
iwi_auth_and_assoc(struct iwi_softc *sc, struct ieee80211vap *vap)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
struct ieee80211_node *ni;
|
|
struct iwi_configuration config;
|
|
struct iwi_associate *assoc = &sc->assoc;
|
|
struct iwi_rateset rs;
|
|
uint16_t capinfo;
|
|
uint32_t data;
|
|
int error, mode;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
|
|
if (sc->flags & IWI_FLAG_ASSOCIATED) {
|
|
DPRINTF(("Already associated\n"));
|
|
return (-1);
|
|
}
|
|
|
|
IWI_STATE_BEGIN(sc, IWI_FW_ASSOCIATING);
|
|
error = 0;
|
|
mode = 0;
|
|
|
|
if (IEEE80211_IS_CHAN_A(ic->ic_curchan))
|
|
mode = IWI_MODE_11A;
|
|
else if (IEEE80211_IS_CHAN_G(ic->ic_curchan))
|
|
mode = IWI_MODE_11G;
|
|
if (IEEE80211_IS_CHAN_B(ic->ic_curchan))
|
|
mode = IWI_MODE_11B;
|
|
|
|
if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
|
|
memset(&config, 0, sizeof config);
|
|
config.bluetooth_coexistence = sc->bluetooth;
|
|
config.antenna = sc->antenna;
|
|
config.multicast_enabled = 1;
|
|
if (mode == IWI_MODE_11G)
|
|
config.use_protection = 1;
|
|
config.answer_pbreq =
|
|
(vap->iv_opmode == IEEE80211_M_IBSS) ? 1 : 0;
|
|
config.disable_unicast_decryption = 1;
|
|
config.disable_multicast_decryption = 1;
|
|
DPRINTF(("Configuring adapter\n"));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config);
|
|
if (error != 0)
|
|
goto done;
|
|
}
|
|
|
|
#ifdef IWI_DEBUG
|
|
if (iwi_debug > 0) {
|
|
printf("Setting ESSID to ");
|
|
ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ni->ni_essid, ni->ni_esslen);
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
error = iwi_setpowermode(sc, vap);
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
data = htole32(vap->iv_rtsthreshold);
|
|
DPRINTF(("Setting RTS threshold to %u\n", le32toh(data)));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_RTS_THRESHOLD, &data, sizeof data);
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
data = htole32(vap->iv_fragthreshold);
|
|
DPRINTF(("Setting fragmentation threshold to %u\n", le32toh(data)));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_FRAG_THRESHOLD, &data, sizeof data);
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
/* the rate set has already been "negotiated" */
|
|
memset(&rs, 0, sizeof rs);
|
|
rs.mode = mode;
|
|
rs.type = IWI_RATESET_TYPE_NEGOTIATED;
|
|
rs.nrates = ni->ni_rates.rs_nrates;
|
|
if (rs.nrates > IWI_RATESET_SIZE) {
|
|
DPRINTF(("Truncating negotiated rate set from %u\n",
|
|
rs.nrates));
|
|
rs.nrates = IWI_RATESET_SIZE;
|
|
}
|
|
memcpy(rs.rates, ni->ni_rates.rs_rates, rs.nrates);
|
|
DPRINTF(("Setting negotiated rates (%u)\n", rs.nrates));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
memset(assoc, 0, sizeof *assoc);
|
|
|
|
if ((vap->iv_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) {
|
|
/* NB: don't treat WME setup as failure */
|
|
if (iwi_wme_setparams(sc) == 0 && iwi_wme_setie(sc) == 0)
|
|
assoc->policy |= htole16(IWI_POLICY_WME);
|
|
/* XXX complain on failure? */
|
|
}
|
|
|
|
if (vap->iv_appie_wpa != NULL) {
|
|
struct ieee80211_appie *ie = vap->iv_appie_wpa;
|
|
|
|
DPRINTF(("Setting optional IE (len=%u)\n", ie->ie_len));
|
|
error = iwi_cmd(sc, IWI_CMD_SET_OPTIE, ie->ie_data, ie->ie_len);
|
|
if (error != 0)
|
|
goto done;
|
|
}
|
|
|
|
error = iwi_set_sensitivity(sc, ic->ic_node_getrssi(ni));
|
|
if (error != 0)
|
|
goto done;
|
|
|
|
assoc->mode = mode;
|
|
assoc->chan = ic->ic_curchan->ic_ieee;
|
|
/*
|
|
* NB: do not arrange for shared key auth w/o privacy
|
|
* (i.e. a wep key); it causes a firmware error.
|
|
*/
|
|
if ((vap->iv_flags & IEEE80211_F_PRIVACY) &&
|
|
ni->ni_authmode == IEEE80211_AUTH_SHARED) {
|
|
assoc->auth = IWI_AUTH_SHARED;
|
|
/*
|
|
* It's possible to have privacy marked but no default
|
|
* key setup. This typically is due to a user app bug
|
|
* but if we blindly grab the key the firmware will
|
|
* barf so avoid it for now.
|
|
*/
|
|
if (vap->iv_def_txkey != IEEE80211_KEYIX_NONE)
|
|
assoc->auth |= vap->iv_def_txkey << 4;
|
|
|
|
error = iwi_setwepkeys(sc, vap);
|
|
if (error != 0)
|
|
goto done;
|
|
}
|
|
if (vap->iv_flags & IEEE80211_F_WPA)
|
|
assoc->policy |= htole16(IWI_POLICY_WPA);
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS && ni->ni_tstamp.tsf == 0)
|
|
assoc->type = IWI_HC_IBSS_START;
|
|
else
|
|
assoc->type = IWI_HC_ASSOC;
|
|
memcpy(assoc->tstamp, ni->ni_tstamp.data, 8);
|
|
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS)
|
|
capinfo = IEEE80211_CAPINFO_IBSS;
|
|
else
|
|
capinfo = IEEE80211_CAPINFO_ESS;
|
|
if (vap->iv_flags & IEEE80211_F_PRIVACY)
|
|
capinfo |= IEEE80211_CAPINFO_PRIVACY;
|
|
if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) &&
|
|
IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan))
|
|
capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE;
|
|
if (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)
|
|
capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME;
|
|
assoc->capinfo = htole16(capinfo);
|
|
|
|
assoc->lintval = htole16(ic->ic_lintval);
|
|
assoc->intval = htole16(ni->ni_intval);
|
|
IEEE80211_ADDR_COPY(assoc->bssid, ni->ni_bssid);
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS)
|
|
IEEE80211_ADDR_COPY(assoc->dst, ifp->if_broadcastaddr);
|
|
else
|
|
IEEE80211_ADDR_COPY(assoc->dst, ni->ni_bssid);
|
|
|
|
DPRINTF(("%s bssid %6D dst %6D channel %u policy 0x%x "
|
|
"auth %u capinfo 0x%x lintval %u bintval %u\n",
|
|
assoc->type == IWI_HC_IBSS_START ? "Start" : "Join",
|
|
assoc->bssid, ":", assoc->dst, ":",
|
|
assoc->chan, le16toh(assoc->policy), assoc->auth,
|
|
le16toh(assoc->capinfo), le16toh(assoc->lintval),
|
|
le16toh(assoc->intval)));
|
|
error = iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc);
|
|
done:
|
|
ieee80211_free_node(ni);
|
|
if (error)
|
|
IWI_STATE_END(sc, IWI_FW_ASSOCIATING);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
iwi_disassoc(void *arg, int pending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
iwi_disassociate(sc, 0);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
iwi_disassociate(struct iwi_softc *sc, int quiet)
|
|
{
|
|
struct iwi_associate *assoc = &sc->assoc;
|
|
|
|
if ((sc->flags & IWI_FLAG_ASSOCIATED) == 0) {
|
|
DPRINTF(("Not associated\n"));
|
|
return (-1);
|
|
}
|
|
|
|
IWI_STATE_BEGIN(sc, IWI_FW_DISASSOCIATING);
|
|
|
|
if (quiet)
|
|
assoc->type = IWI_HC_DISASSOC_QUIET;
|
|
else
|
|
assoc->type = IWI_HC_DISASSOC;
|
|
|
|
DPRINTF(("Trying to disassociate from %6D channel %u\n",
|
|
assoc->bssid, ":", assoc->chan));
|
|
return iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc);
|
|
}
|
|
|
|
/*
|
|
* release dma resources for the firmware
|
|
*/
|
|
static void
|
|
iwi_release_fw_dma(struct iwi_softc *sc)
|
|
{
|
|
if (sc->fw_flags & IWI_FW_HAVE_PHY)
|
|
bus_dmamap_unload(sc->fw_dmat, sc->fw_map);
|
|
if (sc->fw_flags & IWI_FW_HAVE_MAP)
|
|
bus_dmamem_free(sc->fw_dmat, sc->fw_virtaddr, sc->fw_map);
|
|
if (sc->fw_flags & IWI_FW_HAVE_DMAT)
|
|
bus_dma_tag_destroy(sc->fw_dmat);
|
|
|
|
sc->fw_flags = 0;
|
|
sc->fw_dma_size = 0;
|
|
sc->fw_dmat = NULL;
|
|
sc->fw_map = NULL;
|
|
sc->fw_physaddr = 0;
|
|
sc->fw_virtaddr = NULL;
|
|
}
|
|
|
|
/*
|
|
* allocate the dma descriptor for the firmware.
|
|
* Return 0 on success, 1 on error.
|
|
* Must be called unlocked, protected by IWI_FLAG_FW_LOADING.
|
|
*/
|
|
static int
|
|
iwi_init_fw_dma(struct iwi_softc *sc, int size)
|
|
{
|
|
if (sc->fw_dma_size >= size)
|
|
return 0;
|
|
if (bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
size, 1, size, 0, NULL, NULL, &sc->fw_dmat) != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not create firmware DMA tag\n");
|
|
goto error;
|
|
}
|
|
sc->fw_flags |= IWI_FW_HAVE_DMAT;
|
|
if (bus_dmamem_alloc(sc->fw_dmat, &sc->fw_virtaddr, 0,
|
|
&sc->fw_map) != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate firmware DMA memory\n");
|
|
goto error;
|
|
}
|
|
sc->fw_flags |= IWI_FW_HAVE_MAP;
|
|
if (bus_dmamap_load(sc->fw_dmat, sc->fw_map, sc->fw_virtaddr,
|
|
size, iwi_dma_map_addr, &sc->fw_physaddr, 0) != 0) {
|
|
device_printf(sc->sc_dev, "could not load firmware DMA map\n");
|
|
goto error;
|
|
}
|
|
sc->fw_flags |= IWI_FW_HAVE_PHY;
|
|
sc->fw_dma_size = size;
|
|
return 0;
|
|
|
|
error:
|
|
iwi_release_fw_dma(sc);
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
iwi_init_locked(struct iwi_softc *sc)
|
|
{
|
|
struct iwi_rx_data *data;
|
|
int i;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
if (sc->fw_state == IWI_FW_LOADING) {
|
|
device_printf(sc->sc_dev, "%s: already loading\n", __func__);
|
|
return; /* XXX: condvar? */
|
|
}
|
|
|
|
iwi_stop_locked(sc);
|
|
|
|
IWI_STATE_BEGIN(sc, IWI_FW_LOADING);
|
|
|
|
if (iwi_reset(sc) != 0) {
|
|
device_printf(sc->sc_dev, "could not reset adapter\n");
|
|
goto fail;
|
|
}
|
|
if (iwi_load_firmware(sc, &sc->fw_boot) != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load boot firmware %s\n", sc->fw_boot.name);
|
|
goto fail;
|
|
}
|
|
if (iwi_load_ucode(sc, &sc->fw_uc) != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load microcode %s\n", sc->fw_uc.name);
|
|
goto fail;
|
|
}
|
|
|
|
iwi_stop_master(sc);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_CMD_BASE, sc->cmdq.physaddr);
|
|
CSR_WRITE_4(sc, IWI_CSR_CMD_SIZE, sc->cmdq.count);
|
|
CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_TX1_BASE, sc->txq[0].physaddr);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX1_SIZE, sc->txq[0].count);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX1_WIDX, sc->txq[0].cur);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_TX2_BASE, sc->txq[1].physaddr);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX2_SIZE, sc->txq[1].count);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX2_WIDX, sc->txq[1].cur);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_TX3_BASE, sc->txq[2].physaddr);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX3_SIZE, sc->txq[2].count);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX3_WIDX, sc->txq[2].cur);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_TX4_BASE, sc->txq[3].physaddr);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX4_SIZE, sc->txq[3].count);
|
|
CSR_WRITE_4(sc, IWI_CSR_TX4_WIDX, sc->txq[3].cur);
|
|
|
|
for (i = 0; i < sc->rxq.count; i++) {
|
|
data = &sc->rxq.data[i];
|
|
CSR_WRITE_4(sc, data->reg, data->physaddr);
|
|
}
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, sc->rxq.count - 1);
|
|
|
|
if (iwi_load_firmware(sc, &sc->fw_fw) != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load main firmware %s\n", sc->fw_fw.name);
|
|
goto fail;
|
|
}
|
|
sc->flags |= IWI_FLAG_FW_INITED;
|
|
|
|
IWI_STATE_END(sc, IWI_FW_LOADING);
|
|
|
|
if (iwi_config(sc) != 0) {
|
|
device_printf(sc->sc_dev, "unable to enable adapter\n");
|
|
goto fail2;
|
|
}
|
|
|
|
callout_reset(&sc->sc_wdtimer, hz, iwi_watchdog, sc);
|
|
sc->sc_running = 1;
|
|
return;
|
|
fail:
|
|
IWI_STATE_END(sc, IWI_FW_LOADING);
|
|
fail2:
|
|
iwi_stop_locked(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_init(void *priv)
|
|
{
|
|
struct iwi_softc *sc = priv;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
iwi_init_locked(sc);
|
|
IWI_UNLOCK(sc);
|
|
|
|
if (sc->sc_running)
|
|
ieee80211_start_all(ic);
|
|
}
|
|
|
|
static void
|
|
iwi_stop_locked(void *priv)
|
|
{
|
|
struct iwi_softc *sc = priv;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
sc->sc_running = 0;
|
|
|
|
if (sc->sc_softled) {
|
|
callout_stop(&sc->sc_ledtimer);
|
|
sc->sc_blinking = 0;
|
|
}
|
|
callout_stop(&sc->sc_wdtimer);
|
|
callout_stop(&sc->sc_rftimer);
|
|
|
|
iwi_stop_master(sc);
|
|
|
|
CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_SOFT_RESET);
|
|
|
|
/* reset rings */
|
|
iwi_reset_cmd_ring(sc, &sc->cmdq);
|
|
iwi_reset_tx_ring(sc, &sc->txq[0]);
|
|
iwi_reset_tx_ring(sc, &sc->txq[1]);
|
|
iwi_reset_tx_ring(sc, &sc->txq[2]);
|
|
iwi_reset_tx_ring(sc, &sc->txq[3]);
|
|
iwi_reset_rx_ring(sc, &sc->rxq);
|
|
|
|
sc->sc_tx_timer = 0;
|
|
sc->sc_state_timer = 0;
|
|
sc->sc_busy_timer = 0;
|
|
sc->flags &= ~(IWI_FLAG_BUSY | IWI_FLAG_ASSOCIATED);
|
|
sc->fw_state = IWI_FW_IDLE;
|
|
wakeup(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_stop(struct iwi_softc *sc)
|
|
{
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
iwi_stop_locked(sc);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_restart(void *arg, int npending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
|
|
iwi_init(sc);
|
|
}
|
|
|
|
/*
|
|
* Return whether or not the radio is enabled in hardware
|
|
* (i.e. the rfkill switch is "off").
|
|
*/
|
|
static int
|
|
iwi_getrfkill(struct iwi_softc *sc)
|
|
{
|
|
return (CSR_READ_4(sc, IWI_CSR_IO) & IWI_IO_RADIO_ENABLED) == 0;
|
|
}
|
|
|
|
static void
|
|
iwi_radio_on(void *arg, int pending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
device_printf(sc->sc_dev, "radio turned on\n");
|
|
|
|
iwi_init(sc);
|
|
ieee80211_notify_radio(ic, 1);
|
|
}
|
|
|
|
static void
|
|
iwi_rfkill_poll(void *arg)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
|
|
IWI_LOCK_ASSERT(sc);
|
|
|
|
/*
|
|
* Check for a change in rfkill state. We get an
|
|
* interrupt when a radio is disabled but not when
|
|
* it is enabled so we must poll for the latter.
|
|
*/
|
|
if (!iwi_getrfkill(sc)) {
|
|
ieee80211_runtask(&sc->sc_ic, &sc->sc_radiontask);
|
|
return;
|
|
}
|
|
callout_reset(&sc->sc_rftimer, 2*hz, iwi_rfkill_poll, sc);
|
|
}
|
|
|
|
static void
|
|
iwi_radio_off(void *arg, int pending)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
IWI_LOCK_DECL;
|
|
|
|
device_printf(sc->sc_dev, "radio turned off\n");
|
|
|
|
ieee80211_notify_radio(ic, 0);
|
|
|
|
IWI_LOCK(sc);
|
|
iwi_stop_locked(sc);
|
|
iwi_rfkill_poll(sc);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
iwi_sysctl_stats(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct iwi_softc *sc = arg1;
|
|
uint32_t size, buf[128];
|
|
|
|
memset(buf, 0, sizeof buf);
|
|
|
|
if (!(sc->flags & IWI_FLAG_FW_INITED))
|
|
return SYSCTL_OUT(req, buf, sizeof buf);
|
|
|
|
size = min(CSR_READ_4(sc, IWI_CSR_TABLE0_SIZE), 128 - 1);
|
|
CSR_READ_REGION_4(sc, IWI_CSR_TABLE0_BASE, &buf[1], size);
|
|
|
|
return SYSCTL_OUT(req, buf, size);
|
|
}
|
|
|
|
static int
|
|
iwi_sysctl_radio(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct iwi_softc *sc = arg1;
|
|
int val = !iwi_getrfkill(sc);
|
|
|
|
return SYSCTL_OUT(req, &val, sizeof val);
|
|
}
|
|
|
|
/*
|
|
* Add sysctl knobs.
|
|
*/
|
|
static void
|
|
iwi_sysctlattach(struct iwi_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "radio",
|
|
CTLTYPE_INT | CTLFLAG_RD, sc, 0, iwi_sysctl_radio, "I",
|
|
"radio transmitter switch state (0=off, 1=on)");
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "stats",
|
|
CTLTYPE_OPAQUE | CTLFLAG_RD, sc, 0, iwi_sysctl_stats, "S",
|
|
"statistics");
|
|
|
|
sc->bluetooth = 0;
|
|
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "bluetooth",
|
|
CTLFLAG_RW, &sc->bluetooth, 0, "bluetooth coexistence");
|
|
|
|
sc->antenna = IWI_ANTENNA_AUTO;
|
|
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "antenna",
|
|
CTLFLAG_RW, &sc->antenna, 0, "antenna (0=auto)");
|
|
}
|
|
|
|
/*
|
|
* LED support.
|
|
*
|
|
* Different cards have different capabilities. Some have three
|
|
* led's while others have only one. The linux ipw driver defines
|
|
* led's for link state (associated or not), band (11a, 11g, 11b),
|
|
* and for link activity. We use one led and vary the blink rate
|
|
* according to the tx/rx traffic a la the ath driver.
|
|
*/
|
|
|
|
static __inline uint32_t
|
|
iwi_toggle_event(uint32_t r)
|
|
{
|
|
return r &~ (IWI_RST_STANDBY | IWI_RST_GATE_ODMA |
|
|
IWI_RST_GATE_IDMA | IWI_RST_GATE_ADMA);
|
|
}
|
|
|
|
static uint32_t
|
|
iwi_read_event(struct iwi_softc *sc)
|
|
{
|
|
return MEM_READ_4(sc, IWI_MEM_EEPROM_EVENT);
|
|
}
|
|
|
|
static void
|
|
iwi_write_event(struct iwi_softc *sc, uint32_t v)
|
|
{
|
|
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, v);
|
|
}
|
|
|
|
static void
|
|
iwi_led_done(void *arg)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
|
|
sc->sc_blinking = 0;
|
|
}
|
|
|
|
/*
|
|
* Turn the activity LED off: flip the pin and then set a timer so no
|
|
* update will happen for the specified duration.
|
|
*/
|
|
static void
|
|
iwi_led_off(void *arg)
|
|
{
|
|
struct iwi_softc *sc = arg;
|
|
uint32_t v;
|
|
|
|
v = iwi_read_event(sc);
|
|
v &= ~sc->sc_ledpin;
|
|
iwi_write_event(sc, iwi_toggle_event(v));
|
|
callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, iwi_led_done, sc);
|
|
}
|
|
|
|
/*
|
|
* Blink the LED according to the specified on/off times.
|
|
*/
|
|
static void
|
|
iwi_led_blink(struct iwi_softc *sc, int on, int off)
|
|
{
|
|
uint32_t v;
|
|
|
|
v = iwi_read_event(sc);
|
|
v |= sc->sc_ledpin;
|
|
iwi_write_event(sc, iwi_toggle_event(v));
|
|
sc->sc_blinking = 1;
|
|
sc->sc_ledoff = off;
|
|
callout_reset(&sc->sc_ledtimer, on, iwi_led_off, sc);
|
|
}
|
|
|
|
static void
|
|
iwi_led_event(struct iwi_softc *sc, int event)
|
|
{
|
|
#define N(a) (sizeof(a)/sizeof(a[0]))
|
|
/* NB: on/off times from the Atheros NDIS driver, w/ permission */
|
|
static const struct {
|
|
u_int rate; /* tx/rx iwi rate */
|
|
u_int16_t timeOn; /* LED on time (ms) */
|
|
u_int16_t timeOff; /* LED off time (ms) */
|
|
} blinkrates[] = {
|
|
{ IWI_RATE_OFDM54, 40, 10 },
|
|
{ IWI_RATE_OFDM48, 44, 11 },
|
|
{ IWI_RATE_OFDM36, 50, 13 },
|
|
{ IWI_RATE_OFDM24, 57, 14 },
|
|
{ IWI_RATE_OFDM18, 67, 16 },
|
|
{ IWI_RATE_OFDM12, 80, 20 },
|
|
{ IWI_RATE_DS11, 100, 25 },
|
|
{ IWI_RATE_OFDM9, 133, 34 },
|
|
{ IWI_RATE_OFDM6, 160, 40 },
|
|
{ IWI_RATE_DS5, 200, 50 },
|
|
{ 6, 240, 58 }, /* XXX 3Mb/s if it existed */
|
|
{ IWI_RATE_DS2, 267, 66 },
|
|
{ IWI_RATE_DS1, 400, 100 },
|
|
{ 0, 500, 130 }, /* unknown rate/polling */
|
|
};
|
|
uint32_t txrate;
|
|
int j = 0; /* XXX silence compiler */
|
|
|
|
sc->sc_ledevent = ticks; /* time of last event */
|
|
if (sc->sc_blinking) /* don't interrupt active blink */
|
|
return;
|
|
switch (event) {
|
|
case IWI_LED_POLL:
|
|
j = N(blinkrates)-1;
|
|
break;
|
|
case IWI_LED_TX:
|
|
/* read current transmission rate from adapter */
|
|
txrate = CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE);
|
|
if (blinkrates[sc->sc_txrix].rate != txrate) {
|
|
for (j = 0; j < N(blinkrates)-1; j++)
|
|
if (blinkrates[j].rate == txrate)
|
|
break;
|
|
sc->sc_txrix = j;
|
|
} else
|
|
j = sc->sc_txrix;
|
|
break;
|
|
case IWI_LED_RX:
|
|
if (blinkrates[sc->sc_rxrix].rate != sc->sc_rxrate) {
|
|
for (j = 0; j < N(blinkrates)-1; j++)
|
|
if (blinkrates[j].rate == sc->sc_rxrate)
|
|
break;
|
|
sc->sc_rxrix = j;
|
|
} else
|
|
j = sc->sc_rxrix;
|
|
break;
|
|
}
|
|
/* XXX beware of overflow */
|
|
iwi_led_blink(sc, (blinkrates[j].timeOn * hz) / 1000,
|
|
(blinkrates[j].timeOff * hz) / 1000);
|
|
#undef N
|
|
}
|
|
|
|
static int
|
|
iwi_sysctl_softled(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct iwi_softc *sc = arg1;
|
|
int softled = sc->sc_softled;
|
|
int error;
|
|
|
|
error = sysctl_handle_int(oidp, &softled, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
softled = (softled != 0);
|
|
if (softled != sc->sc_softled) {
|
|
if (softled) {
|
|
uint32_t v = iwi_read_event(sc);
|
|
v &= ~sc->sc_ledpin;
|
|
iwi_write_event(sc, iwi_toggle_event(v));
|
|
}
|
|
sc->sc_softled = softled;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
iwi_ledattach(struct iwi_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
|
|
|
|
sc->sc_blinking = 0;
|
|
sc->sc_ledstate = 1;
|
|
sc->sc_ledidle = (2700*hz)/1000; /* 2.7sec */
|
|
callout_init_mtx(&sc->sc_ledtimer, &sc->sc_mtx, 0);
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"softled", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
iwi_sysctl_softled, "I", "enable/disable software LED support");
|
|
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"ledpin", CTLFLAG_RW, &sc->sc_ledpin, 0,
|
|
"pin setting to turn activity LED on");
|
|
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"ledidle", CTLFLAG_RW, &sc->sc_ledidle, 0,
|
|
"idle time for inactivity LED (ticks)");
|
|
/* XXX for debugging */
|
|
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"nictype", CTLFLAG_RD, &sc->sc_nictype, 0,
|
|
"NIC type from EEPROM");
|
|
|
|
sc->sc_ledpin = IWI_RST_LED_ACTIVITY;
|
|
sc->sc_softled = 1;
|
|
|
|
sc->sc_nictype = (iwi_read_prom_word(sc, IWI_EEPROM_NIC) >> 8) & 0xff;
|
|
if (sc->sc_nictype == 1) {
|
|
/*
|
|
* NB: led's are reversed.
|
|
*/
|
|
sc->sc_ledpin = IWI_RST_LED_ASSOCIATED;
|
|
}
|
|
}
|
|
|
|
static void
|
|
iwi_scan_start(struct ieee80211com *ic)
|
|
{
|
|
/* ignore */
|
|
}
|
|
|
|
static void
|
|
iwi_set_channel(struct ieee80211com *ic)
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
|
|
if (sc->fw_state == IWI_FW_IDLE)
|
|
iwi_setcurchan(sc, ic->ic_curchan->ic_ieee);
|
|
}
|
|
|
|
static void
|
|
iwi_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell)
|
|
{
|
|
struct ieee80211vap *vap = ss->ss_vap;
|
|
struct iwi_softc *sc = vap->iv_ic->ic_softc;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
if (iwi_scanchan(sc, maxdwell, 0))
|
|
ieee80211_cancel_scan(vap);
|
|
IWI_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
iwi_scan_mindwell(struct ieee80211_scan_state *ss)
|
|
{
|
|
/* NB: don't try to abort scan; wait for firmware to finish */
|
|
}
|
|
|
|
static void
|
|
iwi_scan_end(struct ieee80211com *ic)
|
|
{
|
|
struct iwi_softc *sc = ic->ic_softc;
|
|
IWI_LOCK_DECL;
|
|
|
|
IWI_LOCK(sc);
|
|
sc->flags &= ~IWI_FLAG_CHANNEL_SCAN;
|
|
/* NB: make sure we're still scanning */
|
|
if (sc->fw_state == IWI_FW_SCANNING)
|
|
iwi_cmd(sc, IWI_CMD_ABORT_SCAN, NULL, 0);
|
|
IWI_UNLOCK(sc);
|
|
}
|