freebsd-dev/sys/dev/usb/usb_device.h
Andrew Thompson 495f25cedc MFp4 //depot/projects/usb@160413
Use direct reference to parent high-speed HUB instead of indirect, due to
pointer clearing race at detach of parent USB HUB.

Reported by:	kientzle
Submitted by:	Hans Petter Selasky
PR:		usb/133545
2009-04-22 17:07:53 +00:00

210 lines
7.6 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _USB2_DEVICE_H_
#define _USB2_DEVICE_H_
struct usb2_symlink; /* UGEN */
struct usb_device; /* linux compat */
#define USB_DEFAULT_XFER_MAX 2
/* "usb2_parse_config()" commands */
#define USB_CFG_ALLOC 0
#define USB_CFG_FREE 1
#define USB_CFG_INIT 2
/* "usb2_unconfigure()" flags */
#define USB_UNCFG_FLAG_NONE 0x00
#define USB_UNCFG_FLAG_FREE_SUBDEV 0x01 /* subdevices are freed */
#define USB_UNCFG_FLAG_FREE_EP0 0x02 /* endpoint zero is freed */
struct usb2_clear_stall_msg {
struct usb2_proc_msg hdr;
struct usb2_device *udev;
};
/*
* The following structure defines an USB pipe which is equal to an
* USB endpoint.
*/
struct usb2_pipe {
struct usb2_xfer_queue pipe_q; /* queue of USB transfers */
struct usb2_endpoint_descriptor *edesc;
struct usb2_pipe_methods *methods; /* set by HC driver */
uint16_t isoc_next;
uint16_t refcount;
uint8_t toggle_next:1; /* next data toggle value */
uint8_t is_stalled:1; /* set if pipe is stalled */
uint8_t is_synced:1; /* set if we a synchronised */
uint8_t unused:5;
uint8_t iface_index; /* not used by "default pipe" */
};
/*
* The following structure defines an USB interface.
*/
struct usb2_interface {
struct usb2_interface_descriptor *idesc;
device_t subdev;
uint8_t alt_index;
uint8_t parent_iface_index;
};
/*
* The following structure defines the USB device flags.
*/
struct usb2_device_flags {
uint8_t usb2_mode:1; /* USB mode (see USB_MODE_XXX) */
uint8_t self_powered:1; /* set if USB device is self powered */
uint8_t suspended:1; /* set if USB device is suspended */
uint8_t no_strings:1; /* set if USB device does not support
* strings */
uint8_t remote_wakeup:1; /* set if remote wakeup is enabled */
uint8_t uq_bus_powered:1; /* set if BUS powered quirk is present */
};
/*
* The following structure is used for power-save purposes. The data
* in this structure is protected by the USB BUS lock.
*/
struct usb2_power_save {
usb2_ticks_t last_xfer_time; /* copy of "ticks" */
usb2_size_t type_refs[4]; /* transfer reference count */
usb2_size_t read_refs; /* data read references */
usb2_size_t write_refs; /* data write references */
uint8_t suspended; /* set if USB device is suspended */
};
/*
* The following structure defines an USB device. There exists one of
* these structures for every USB device.
*/
struct usb2_device {
struct usb2_clear_stall_msg cs_msg[2]; /* generic clear stall
* messages */
struct sx default_sx[2];
struct mtx default_mtx[1];
struct cv default_cv[2];
struct usb2_interface *ifaces;
struct usb2_pipe default_pipe; /* Control Endpoint 0 */
struct usb2_pipe *pipes;
struct usb2_power_save pwr_save;/* power save data */
struct usb2_bus *bus; /* our USB BUS */
device_t parent_dev; /* parent device */
struct usb2_device *parent_hub;
struct usb2_device *parent_hs_hub; /* high-speed parent HUB */
struct usb2_config_descriptor *cdesc; /* full config descr */
struct usb2_hub *hub; /* only if this is a hub */
#if USB_HAVE_COMPAT_LINUX
struct usb_device *linux_dev;
#endif
struct usb2_xfer *default_xfer[USB_DEFAULT_XFER_MAX];
struct usb2_temp_data *usb2_template_ptr;
struct usb2_pipe *pipe_curr; /* current clear stall pipe */
#if USB_HAVE_UGEN
struct usb2_fifo *fifo[USB_FIFO_MAX];
struct usb2_symlink *ugen_symlink; /* our generic symlink */
struct cdev *default_dev; /* Control Endpoint 0 device node */
LIST_HEAD(,usb2_fs_privdata) pd_list;
char ugen_name[20]; /* name of ugenX.X device */
#endif
usb2_ticks_t plugtime; /* copy of "ticks" */
uint16_t refcount;
#define USB_DEV_REF_MAX 0xffff
uint16_t power; /* mA the device uses */
uint16_t langid; /* language for strings */
uint8_t address; /* device addess */
uint8_t device_index; /* device index in "bus->devices" */
uint8_t curr_config_index; /* current configuration index */
uint8_t curr_config_no; /* current configuration number */
uint8_t depth; /* distance from root HUB */
uint8_t speed; /* low/full/high speed */
uint8_t port_index; /* parent HUB port index */
uint8_t port_no; /* parent HUB port number */
uint8_t hs_hub_addr; /* high-speed HUB address */
uint8_t hs_port_no; /* high-speed HUB port number */
uint8_t driver_added_refcount; /* our driver added generation count */
uint8_t power_mode; /* see USB_POWER_XXX */
uint8_t ifaces_max; /* number of interfaces present */
uint8_t pipes_max; /* number of pipes present */
/* the "flags" field is write-protected by "bus->mtx" */
struct usb2_device_flags flags;
struct usb2_endpoint_descriptor default_ep_desc; /* for pipe 0 */
struct usb2_device_descriptor ddesc; /* device descriptor */
#if USB_HAVE_STRINGS
char serial[64]; /* serial number */
char manufacturer[64]; /* manufacturer string */
char product[64]; /* product string */
#endif
};
/* globals */
extern int usb2_template;
/* function prototypes */
struct usb2_device *usb2_alloc_device(device_t parent_dev, struct usb2_bus *bus,
struct usb2_device *parent_hub, uint8_t depth,
uint8_t port_index, uint8_t port_no, uint8_t speed,
uint8_t usb2_mode);
struct usb2_pipe *usb2_get_pipe(struct usb2_device *udev, uint8_t iface_index,
const struct usb2_config *setup);
struct usb2_pipe *usb2_get_pipe_by_addr(struct usb2_device *udev, uint8_t ea_val);
usb2_error_t usb2_interface_count(struct usb2_device *udev, uint8_t *count);
usb2_error_t usb2_probe_and_attach(struct usb2_device *udev,
uint8_t iface_index);
usb2_error_t usb2_reset_iface_endpoints(struct usb2_device *udev,
uint8_t iface_index);
usb2_error_t usb2_set_config_index(struct usb2_device *udev, uint8_t index);
usb2_error_t usb2_set_endpoint_stall(struct usb2_device *udev,
struct usb2_pipe *pipe, uint8_t do_stall);
usb2_error_t usb2_suspend_resume(struct usb2_device *udev,
uint8_t do_suspend);
void usb2_devinfo(struct usb2_device *udev, char *dst_ptr, uint16_t dst_len);
void usb2_free_device(struct usb2_device *, uint8_t);
void *usb2_find_descriptor(struct usb2_device *udev, void *id,
uint8_t iface_index, uint8_t type, uint8_t type_mask,
uint8_t subtype, uint8_t subtype_mask);
void usb_linux_free_device(struct usb_device *dev);
uint8_t usb2_peer_can_wakeup(struct usb2_device *udev);
struct usb2_pipe *usb2_pipe_foreach(struct usb2_device *udev, struct usb2_pipe *pipe);
#endif /* _USB2_DEVICE_H_ */