freebsd-dev/sys/cam/scsi/scsi_sg.c
Kenneth D. Merry 86d45c7f3b Fix a device departure bug for the the pass(4), enc(4), sg(4) and ch(4)
drivers.

The bug occurrs when a userland process has the driver instance
open and the underlying device goes away.  We get the devfs
callback that the device node has been destroyed, but not all of
the closes necessary to fully decrement the reference count on the
CAM peripheral.

The reason is that once devfs calls back and says the device has
been destroyed, it is moved off to deadfs, and devfs guarantees
that there will be no more open or close calls.  So the solution
is to keep track of how many outstanding open calls there are on
the device, and just release that many references when we get the
callback from devfs.

scsi_pass.c,
scsi_enc.c,
scsi_enc_internal.h:	Add an open count to the softc in these
			drivers.  Increment it on open and
			decrement it on close.

			When we get a devfs callback to say that
			the device node has gone away, decrement
			the peripheral reference count by the
			number of still outstanding opens.

			Make sure we don't access the peripheral
			with cam_periph_unlock() after what might
			be the final call to
			cam_periph_release_locked().  The
			peripheral might have been freed, and we
			will be dereferencing freed memory.

scsi_ch.c,
scsi_sg.c:		For the ch(4) and sg(4) drivers, add the
			same changes described above, and in
			addition, fix another bug that was
			previously fixed in the pass(4) and enc(4)
			drivers.

			These drivers were calling destroy_dev()
			from their cleanup routine, but that could
			cause a deadlock because the cleanup
			routine could be indirectly called from
			the driver's close routine.  This would
			cause a deadlock, because the device node
			is being held open by the active close
			call, and can't be destroyed.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2012-12-08 04:03:04 +00:00

1076 lines
25 KiB
C

/*-
* Copyright (c) 2007 Scott Long
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* scsi_sg peripheral driver. This driver is meant to implement the Linux
* SG passthrough interface for SCSI.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/fcntl.h>
#include <sys/ioccom.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <sys/devicestat.h>
#include <sys/proc.h>
#include <sys/uio.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_periph.h>
#include <cam/cam_queue.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_sg.h>
#include <compat/linux/linux_ioctl.h>
typedef enum {
SG_FLAG_LOCKED = 0x01,
SG_FLAG_INVALID = 0x02
} sg_flags;
typedef enum {
SG_STATE_NORMAL
} sg_state;
typedef enum {
SG_RDWR_FREE,
SG_RDWR_INPROG,
SG_RDWR_DONE
} sg_rdwr_state;
typedef enum {
SG_CCB_RDWR_IO,
SG_CCB_WAITING
} sg_ccb_types;
#define ccb_type ppriv_field0
#define ccb_rdwr ppriv_ptr1
struct sg_rdwr {
TAILQ_ENTRY(sg_rdwr) rdwr_link;
int tag;
int state;
int buf_len;
char *buf;
union ccb *ccb;
union {
struct sg_header hdr;
struct sg_io_hdr io_hdr;
} hdr;
};
struct sg_softc {
sg_state state;
sg_flags flags;
int open_count;
struct devstat *device_stats;
TAILQ_HEAD(, sg_rdwr) rdwr_done;
struct cdev *dev;
int sg_timeout;
int sg_user_timeout;
uint8_t pd_type;
union ccb saved_ccb;
};
static d_open_t sgopen;
static d_close_t sgclose;
static d_ioctl_t sgioctl;
static d_write_t sgwrite;
static d_read_t sgread;
static periph_init_t sginit;
static periph_ctor_t sgregister;
static periph_oninv_t sgoninvalidate;
static periph_dtor_t sgcleanup;
static periph_start_t sgstart;
static void sgasync(void *callback_arg, uint32_t code,
struct cam_path *path, void *arg);
static void sgdone(struct cam_periph *periph, union ccb *done_ccb);
static int sgsendccb(struct cam_periph *periph, union ccb *ccb);
static int sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
static int sgerror(union ccb *ccb, uint32_t cam_flags,
uint32_t sense_flags);
static void sg_scsiio_status(struct ccb_scsiio *csio,
u_short *hoststat, u_short *drvstat);
static int scsi_group_len(u_char cmd);
static struct periph_driver sgdriver =
{
sginit, "sg",
TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
};
PERIPHDRIVER_DECLARE(sg, sgdriver);
static struct cdevsw sg_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT | D_TRACKCLOSE,
.d_open = sgopen,
.d_close = sgclose,
.d_ioctl = sgioctl,
.d_write = sgwrite,
.d_read = sgread,
.d_name = "sg",
};
static int sg_version = 30125;
static void
sginit(void)
{
cam_status status;
/*
* Install a global async callback. This callback will receive aync
* callbacks like "new device found".
*/
status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
if (status != CAM_REQ_CMP) {
printf("sg: Failed to attach master async callbac "
"due to status 0x%x!\n", status);
}
}
static void
sgdevgonecb(void *arg)
{
struct cam_sim *sim;
struct cam_periph *periph;
struct sg_softc *softc;
int i;
periph = (struct cam_periph *)arg;
sim = periph->sim;
softc = (struct sg_softc *)periph->softc;
KASSERT(softc->open_count >= 0, ("Negative open count %d",
softc->open_count));
mtx_lock(sim->mtx);
/*
* When we get this callback, we will get no more close calls from
* devfs. So if we have any dangling opens, we need to release the
* reference held for that particular context.
*/
for (i = 0; i < softc->open_count; i++)
cam_periph_release_locked(periph);
softc->open_count = 0;
/*
* Release the reference held for the device node, it is gone now.
*/
cam_periph_release_locked(periph);
/*
* We reference the SIM lock directly here, instead of using
* cam_periph_unlock(). The reason is that the final call to
* cam_periph_release_locked() above could result in the periph
* getting freed. If that is the case, dereferencing the periph
* with a cam_periph_unlock() call would cause a page fault.
*/
mtx_unlock(sim->mtx);
}
static void
sgoninvalidate(struct cam_periph *periph)
{
struct sg_softc *softc;
softc = (struct sg_softc *)periph->softc;
/*
* Deregister any async callbacks.
*/
xpt_register_async(0, sgasync, periph, periph->path);
softc->flags |= SG_FLAG_INVALID;
/*
* Tell devfs this device has gone away, and ask for a callback
* when it has cleaned up its state.
*/
destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph);
/*
* XXX Return all queued I/O with ENXIO.
* XXX Handle any transactions queued to the card
* with XPT_ABORT_CCB.
*/
if (bootverbose) {
xpt_print(periph->path, "lost device\n");
}
}
static void
sgcleanup(struct cam_periph *periph)
{
struct sg_softc *softc;
softc = (struct sg_softc *)periph->softc;
if (bootverbose)
xpt_print(periph->path, "removing device entry\n");
devstat_remove_entry(softc->device_stats);
free(softc, M_DEVBUF);
}
static void
sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch (code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL)
break;
if (cgd->protocol != PROTO_SCSI)
break;
/*
* Allocate a peripheral instance for this device and
* start the probe process.
*/
status = cam_periph_alloc(sgregister, sgoninvalidate,
sgcleanup, sgstart, "sg",
CAM_PERIPH_BIO, cgd->ccb_h.path,
sgasync, AC_FOUND_DEVICE, cgd);
if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
const struct cam_status_entry *entry;
entry = cam_fetch_status_entry(status);
printf("sgasync: Unable to attach new device "
"due to status %#x: %s\n", status, entry ?
entry->status_text : "Unknown");
}
break;
}
default:
cam_periph_async(periph, code, path, arg);
break;
}
}
static cam_status
sgregister(struct cam_periph *periph, void *arg)
{
struct sg_softc *softc;
struct ccb_getdev *cgd;
struct ccb_pathinq cpi;
int no_tags;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL) {
printf("sgregister: no getdev CCB, can't register device\n");
return (CAM_REQ_CMP_ERR);
}
softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
if (softc == NULL) {
printf("sgregister: Unable to allocate softc\n");
return (CAM_REQ_CMP_ERR);
}
softc->state = SG_STATE_NORMAL;
softc->pd_type = SID_TYPE(&cgd->inq_data);
softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
TAILQ_INIT(&softc->rdwr_done);
periph->softc = softc;
bzero(&cpi, sizeof(cpi));
xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cpi.ccb_h.func_code = XPT_PATH_INQ;
xpt_action((union ccb *)&cpi);
/*
* We pass in 0 for all blocksize, since we don't know what the
* blocksize of the device is, if it even has a blocksize.
*/
cam_periph_unlock(periph);
no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
softc->device_stats = devstat_new_entry("sg",
periph->unit_number, 0,
DEVSTAT_NO_BLOCKSIZE
| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
softc->pd_type |
XPORT_DEVSTAT_TYPE(cpi.transport) |
DEVSTAT_TYPE_PASS,
DEVSTAT_PRIORITY_PASS);
/*
* Acquire a reference to the periph before we create the devfs
* instance for it. We'll release this reference once the devfs
* instance has been freed.
*/
if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
/* Register the device */
softc->dev = make_dev(&sg_cdevsw, periph->unit_number,
UID_ROOT, GID_OPERATOR, 0600, "%s%d",
periph->periph_name, periph->unit_number);
if (periph->unit_number < 26) {
(void)make_dev_alias(softc->dev, "sg%c",
periph->unit_number + 'a');
} else {
(void)make_dev_alias(softc->dev, "sg%c%c",
((periph->unit_number / 26) - 1) + 'a',
(periph->unit_number % 26) + 'a');
}
cam_periph_lock(periph);
softc->dev->si_drv1 = periph;
/*
* Add as async callback so that we get
* notified if this device goes away.
*/
xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
if (bootverbose)
xpt_announce_periph(periph, NULL);
return (CAM_REQ_CMP);
}
static void
sgstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct sg_softc *softc;
softc = (struct sg_softc *)periph->softc;
switch (softc->state) {
case SG_STATE_NORMAL:
start_ccb->ccb_h.ccb_type = SG_CCB_WAITING;
SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
periph_links.sle);
periph->immediate_priority = CAM_PRIORITY_NONE;
wakeup(&periph->ccb_list);
break;
}
}
static void
sgdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct sg_softc *softc;
struct ccb_scsiio *csio;
softc = (struct sg_softc *)periph->softc;
csio = &done_ccb->csio;
switch (csio->ccb_h.ccb_type) {
case SG_CCB_WAITING:
/* Caller will release the CCB */
wakeup(&done_ccb->ccb_h.cbfcnp);
return;
case SG_CCB_RDWR_IO:
{
struct sg_rdwr *rdwr;
int state;
devstat_end_transaction(softc->device_stats,
csio->dxfer_len,
csio->tag_action & 0xf,
((csio->ccb_h.flags & CAM_DIR_MASK) ==
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
(csio->ccb_h.flags & CAM_DIR_OUT) ?
DEVSTAT_WRITE : DEVSTAT_READ,
NULL, NULL);
rdwr = done_ccb->ccb_h.ccb_rdwr;
state = rdwr->state;
rdwr->state = SG_RDWR_DONE;
wakeup(rdwr);
break;
}
default:
panic("unknown sg CCB type");
}
}
static int
sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct sg_softc *softc;
int error = 0;
periph = (struct cam_periph *)dev->si_drv1;
if (periph == NULL)
return (ENXIO);
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
return (ENXIO);
/*
* Don't allow access when we're running at a high securelevel.
*/
error = securelevel_gt(td->td_ucred, 1);
if (error) {
cam_periph_release(periph);
return (error);
}
cam_periph_lock(periph);
softc = (struct sg_softc *)periph->softc;
if (softc->flags & SG_FLAG_INVALID) {
cam_periph_release_locked(periph);
cam_periph_unlock(periph);
return (ENXIO);
}
softc->open_count++;
cam_periph_unlock(periph);
return (error);
}
static int
sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct cam_sim *sim;
struct cam_periph *periph;
struct sg_softc *softc;
periph = (struct cam_periph *)dev->si_drv1;
if (periph == NULL)
return (ENXIO);
sim = periph->sim;
softc = periph->softc;
mtx_lock(sim->mtx);
softc->open_count--;
cam_periph_release_locked(periph);
/*
* We reference the SIM lock directly here, instead of using
* cam_periph_unlock(). The reason is that the call to
* cam_periph_release_locked() above could result in the periph
* getting freed. If that is the case, dereferencing the periph
* with a cam_periph_unlock() call would cause a page fault.
*
* cam_periph_release() avoids this problem using the same method,
* but we're manually acquiring and dropping the lock here to
* protect the open count and avoid another lock acquisition and
* release.
*/
mtx_unlock(sim->mtx);
return (0);
}
static int
sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
{
union ccb *ccb;
struct ccb_scsiio *csio;
struct cam_periph *periph;
struct sg_softc *softc;
struct sg_io_hdr req;
int dir, error;
periph = (struct cam_periph *)dev->si_drv1;
if (periph == NULL)
return (ENXIO);
cam_periph_lock(periph);
softc = (struct sg_softc *)periph->softc;
error = 0;
switch (cmd) {
case LINUX_SCSI_GET_BUS_NUMBER: {
int busno;
busno = xpt_path_path_id(periph->path);
error = copyout(&busno, arg, sizeof(busno));
break;
}
case LINUX_SCSI_GET_IDLUN: {
struct scsi_idlun idlun;
struct cam_sim *sim;
idlun.dev_id = xpt_path_target_id(periph->path);
sim = xpt_path_sim(periph->path);
idlun.host_unique_id = sim->unit_number;
error = copyout(&idlun, arg, sizeof(idlun));
break;
}
case SG_GET_VERSION_NUM:
case LINUX_SG_GET_VERSION_NUM:
error = copyout(&sg_version, arg, sizeof(sg_version));
break;
case SG_SET_TIMEOUT:
case LINUX_SG_SET_TIMEOUT: {
u_int user_timeout;
error = copyin(arg, &user_timeout, sizeof(u_int));
if (error == 0) {
softc->sg_user_timeout = user_timeout;
softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
}
break;
}
case SG_GET_TIMEOUT:
case LINUX_SG_GET_TIMEOUT:
/*
* The value is returned directly to the syscall.
*/
td->td_retval[0] = softc->sg_user_timeout;
error = 0;
break;
case SG_IO:
case LINUX_SG_IO:
error = copyin(arg, &req, sizeof(req));
if (error)
break;
if (req.cmd_len > IOCDBLEN) {
error = EINVAL;
break;
}
if (req.iovec_count != 0) {
error = EOPNOTSUPP;
break;
}
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
csio = &ccb->csio;
error = copyin(req.cmdp, &csio->cdb_io.cdb_bytes,
req.cmd_len);
if (error) {
xpt_release_ccb(ccb);
break;
}
switch(req.dxfer_direction) {
case SG_DXFER_TO_DEV:
dir = CAM_DIR_OUT;
break;
case SG_DXFER_FROM_DEV:
dir = CAM_DIR_IN;
break;
case SG_DXFER_TO_FROM_DEV:
dir = CAM_DIR_IN | CAM_DIR_OUT;
break;
case SG_DXFER_NONE:
default:
dir = CAM_DIR_NONE;
break;
}
cam_fill_csio(csio,
/*retries*/1,
sgdone,
dir|CAM_DEV_QFRZDIS,
MSG_SIMPLE_Q_TAG,
req.dxferp,
req.dxfer_len,
req.mx_sb_len,
req.cmd_len,
req.timeout);
error = sgsendccb(periph, ccb);
if (error) {
req.host_status = DID_ERROR;
req.driver_status = DRIVER_INVALID;
xpt_release_ccb(ccb);
break;
}
req.status = csio->scsi_status;
req.masked_status = (csio->scsi_status >> 1) & 0x7f;
sg_scsiio_status(csio, &req.host_status, &req.driver_status);
req.resid = csio->resid;
req.duration = csio->ccb_h.timeout;
req.info = 0;
error = copyout(&req, arg, sizeof(req));
if ((error == 0) && (csio->ccb_h.status & CAM_AUTOSNS_VALID)
&& (req.sbp != NULL)) {
req.sb_len_wr = req.mx_sb_len - csio->sense_resid;
error = copyout(&csio->sense_data, req.sbp,
req.sb_len_wr);
}
xpt_release_ccb(ccb);
break;
case SG_GET_RESERVED_SIZE:
case LINUX_SG_GET_RESERVED_SIZE: {
int size = 32768;
error = copyout(&size, arg, sizeof(size));
break;
}
case SG_GET_SCSI_ID:
case LINUX_SG_GET_SCSI_ID:
{
struct sg_scsi_id id;
id.host_no = cam_sim_path(xpt_path_sim(periph->path));
id.channel = xpt_path_path_id(periph->path);
id.scsi_id = xpt_path_target_id(periph->path);
id.lun = xpt_path_lun_id(periph->path);
id.scsi_type = softc->pd_type;
id.h_cmd_per_lun = 1;
id.d_queue_depth = 1;
id.unused[0] = 0;
id.unused[1] = 0;
error = copyout(&id, arg, sizeof(id));
break;
}
case SG_EMULATED_HOST:
case SG_SET_TRANSFORM:
case SG_GET_TRANSFORM:
case SG_GET_NUM_WAITING:
case SG_SCSI_RESET:
case SG_GET_REQUEST_TABLE:
case SG_SET_KEEP_ORPHAN:
case SG_GET_KEEP_ORPHAN:
case SG_GET_ACCESS_COUNT:
case SG_SET_FORCE_LOW_DMA:
case SG_GET_LOW_DMA:
case SG_GET_SG_TABLESIZE:
case SG_SET_FORCE_PACK_ID:
case SG_GET_PACK_ID:
case SG_SET_RESERVED_SIZE:
case SG_GET_COMMAND_Q:
case SG_SET_COMMAND_Q:
case SG_SET_DEBUG:
case SG_NEXT_CMD_LEN:
case LINUX_SG_EMULATED_HOST:
case LINUX_SG_SET_TRANSFORM:
case LINUX_SG_GET_TRANSFORM:
case LINUX_SG_GET_NUM_WAITING:
case LINUX_SG_SCSI_RESET:
case LINUX_SG_GET_REQUEST_TABLE:
case LINUX_SG_SET_KEEP_ORPHAN:
case LINUX_SG_GET_KEEP_ORPHAN:
case LINUX_SG_GET_ACCESS_COUNT:
case LINUX_SG_SET_FORCE_LOW_DMA:
case LINUX_SG_GET_LOW_DMA:
case LINUX_SG_GET_SG_TABLESIZE:
case LINUX_SG_SET_FORCE_PACK_ID:
case LINUX_SG_GET_PACK_ID:
case LINUX_SG_SET_RESERVED_SIZE:
case LINUX_SG_GET_COMMAND_Q:
case LINUX_SG_SET_COMMAND_Q:
case LINUX_SG_SET_DEBUG:
case LINUX_SG_NEXT_CMD_LEN:
default:
#ifdef CAMDEBUG
printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
#endif
error = ENODEV;
break;
}
cam_periph_unlock(periph);
return (error);
}
static int
sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
{
union ccb *ccb;
struct cam_periph *periph;
struct ccb_scsiio *csio;
struct sg_softc *sc;
struct sg_header *hdr;
struct sg_rdwr *rdwr;
u_char cdb_cmd;
char *buf;
int error = 0, cdb_len, buf_len, dir;
periph = dev->si_drv1;
rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
hdr = &rdwr->hdr.hdr;
/* Copy in the header block and sanity check it */
if (uio->uio_resid < sizeof(*hdr)) {
error = EINVAL;
goto out_hdr;
}
error = uiomove(hdr, sizeof(*hdr), uio);
if (error)
goto out_hdr;
ccb = xpt_alloc_ccb();
if (ccb == NULL) {
error = ENOMEM;
goto out_hdr;
}
csio = &ccb->csio;
/*
* Copy in the CDB block. The designers of the interface didn't
* bother to provide a size for this in the header, so we have to
* figure it out ourselves.
*/
if (uio->uio_resid < 1)
goto out_ccb;
error = uiomove(&cdb_cmd, 1, uio);
if (error)
goto out_ccb;
if (hdr->twelve_byte)
cdb_len = 12;
else
cdb_len = scsi_group_len(cdb_cmd);
/*
* We've already read the first byte of the CDB and advanced the uio
* pointer. Just read the rest.
*/
csio->cdb_io.cdb_bytes[0] = cdb_cmd;
error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
if (error)
goto out_ccb;
/*
* Now set up the data block. Again, the designers didn't bother
* to make this reliable.
*/
buf_len = uio->uio_resid;
if (buf_len != 0) {
buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
error = uiomove(buf, buf_len, uio);
if (error)
goto out_buf;
dir = CAM_DIR_OUT;
} else if (hdr->reply_len != 0) {
buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
buf_len = hdr->reply_len;
dir = CAM_DIR_IN;
} else {
buf = NULL;
buf_len = 0;
dir = CAM_DIR_NONE;
}
cam_periph_lock(periph);
sc = periph->softc;
xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cam_fill_csio(csio,
/*retries*/1,
sgdone,
dir|CAM_DEV_QFRZDIS,
MSG_SIMPLE_Q_TAG,
buf,
buf_len,
SG_MAX_SENSE,
cdb_len,
sc->sg_timeout);
/*
* Send off the command and hope that it works. This path does not
* go through sgstart because the I/O is supposed to be asynchronous.
*/
rdwr->buf = buf;
rdwr->buf_len = buf_len;
rdwr->tag = hdr->pack_id;
rdwr->ccb = ccb;
rdwr->state = SG_RDWR_INPROG;
ccb->ccb_h.ccb_rdwr = rdwr;
ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
error = sgsendrdwr(periph, ccb);
cam_periph_unlock(periph);
return (error);
out_buf:
free(buf, M_DEVBUF);
out_ccb:
xpt_free_ccb(ccb);
out_hdr:
free(rdwr, M_DEVBUF);
return (error);
}
static int
sgread(struct cdev *dev, struct uio *uio, int ioflag)
{
struct ccb_scsiio *csio;
struct cam_periph *periph;
struct sg_softc *sc;
struct sg_header *hdr;
struct sg_rdwr *rdwr;
u_short hstat, dstat;
int error, pack_len, reply_len, pack_id;
periph = dev->si_drv1;
/* XXX The pack len field needs to be updated and written out instead
* of discarded. Not sure how to do that.
*/
uio->uio_rw = UIO_WRITE;
if ((error = uiomove(&pack_len, 4, uio)) != 0)
return (error);
if ((error = uiomove(&reply_len, 4, uio)) != 0)
return (error);
if ((error = uiomove(&pack_id, 4, uio)) != 0)
return (error);
uio->uio_rw = UIO_READ;
cam_periph_lock(periph);
sc = periph->softc;
search:
TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
if (rdwr->tag == pack_id)
break;
}
if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
if (msleep(rdwr, periph->sim->mtx, PCATCH, "sgread", 0) == ERESTART)
return (EAGAIN);
goto search;
}
TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
cam_periph_unlock(periph);
hdr = &rdwr->hdr.hdr;
csio = &rdwr->ccb->csio;
sg_scsiio_status(csio, &hstat, &dstat);
hdr->host_status = hstat;
hdr->driver_status = dstat;
hdr->target_status = csio->scsi_status >> 1;
switch (hstat) {
case DID_OK:
case DID_PASSTHROUGH:
case DID_SOFT_ERROR:
hdr->result = 0;
break;
case DID_NO_CONNECT:
case DID_BUS_BUSY:
case DID_TIME_OUT:
hdr->result = EBUSY;
break;
case DID_BAD_TARGET:
case DID_ABORT:
case DID_PARITY:
case DID_RESET:
case DID_BAD_INTR:
case DID_ERROR:
default:
hdr->result = EIO;
break;
}
if (dstat == DRIVER_SENSE) {
bcopy(&csio->sense_data, hdr->sense_buffer,
min(csio->sense_len, SG_MAX_SENSE));
#ifdef CAMDEBUG
scsi_sense_print(csio);
#endif
}
error = uiomove(&hdr->result, sizeof(*hdr) -
offsetof(struct sg_header, result), uio);
if ((error == 0) && (hdr->result == 0))
error = uiomove(rdwr->buf, rdwr->buf_len, uio);
cam_periph_lock(periph);
xpt_free_ccb(rdwr->ccb);
cam_periph_unlock(periph);
free(rdwr->buf, M_DEVBUF);
free(rdwr, M_DEVBUF);
return (error);
}
static int
sgsendccb(struct cam_periph *periph, union ccb *ccb)
{
struct sg_softc *softc;
struct cam_periph_map_info mapinfo;
int error, need_unmap = 0;
softc = periph->softc;
if (((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE)
&& (ccb->csio.data_ptr != NULL)) {
bzero(&mapinfo, sizeof(mapinfo));
/*
* cam_periph_mapmem calls into proc and vm functions that can
* sleep as well as trigger I/O, so we can't hold the lock.
* Dropping it here is reasonably safe.
*/
cam_periph_unlock(periph);
error = cam_periph_mapmem(ccb, &mapinfo);
cam_periph_lock(periph);
if (error)
return (error);
need_unmap = 1;
}
error = cam_periph_runccb(ccb,
sgerror,
CAM_RETRY_SELTO,
SF_RETRY_UA,
softc->device_stats);
if (need_unmap)
cam_periph_unmapmem(ccb, &mapinfo);
return (error);
}
static int
sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
{
struct sg_softc *softc;
softc = periph->softc;
devstat_start_transaction(softc->device_stats, NULL);
xpt_action(ccb);
return (0);
}
static int
sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
{
struct cam_periph *periph;
struct sg_softc *softc;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct sg_softc *)periph->softc;
return (cam_periph_error(ccb, cam_flags, sense_flags,
&softc->saved_ccb));
}
static void
sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
{
int status;
status = csio->ccb_h.status;
switch (status & CAM_STATUS_MASK) {
case CAM_REQ_CMP:
*hoststat = DID_OK;
*drvstat = 0;
break;
case CAM_REQ_CMP_ERR:
*hoststat = DID_ERROR;
*drvstat = 0;
break;
case CAM_REQ_ABORTED:
*hoststat = DID_ABORT;
*drvstat = 0;
break;
case CAM_REQ_INVALID:
*hoststat = DID_ERROR;
*drvstat = DRIVER_INVALID;
break;
case CAM_DEV_NOT_THERE:
*hoststat = DID_BAD_TARGET;
*drvstat = 0;
break;
case CAM_SEL_TIMEOUT:
*hoststat = DID_NO_CONNECT;
*drvstat = 0;
break;
case CAM_CMD_TIMEOUT:
*hoststat = DID_TIME_OUT;
*drvstat = 0;
break;
case CAM_SCSI_STATUS_ERROR:
*hoststat = DID_ERROR;
*drvstat = 0;
break;
case CAM_SCSI_BUS_RESET:
*hoststat = DID_RESET;
*drvstat = 0;
break;
case CAM_UNCOR_PARITY:
*hoststat = DID_PARITY;
*drvstat = 0;
break;
case CAM_SCSI_BUSY:
*hoststat = DID_BUS_BUSY;
*drvstat = 0;
break;
default:
*hoststat = DID_ERROR;
*drvstat = DRIVER_ERROR;
}
if (status & CAM_AUTOSNS_VALID)
*drvstat = DRIVER_SENSE;
}
static int
scsi_group_len(u_char cmd)
{
int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
int group;
group = (cmd >> 5) & 0x7;
return (len[group]);
}