freebsd-dev/tests/sys/net/if_bridge_test.sh
Kristof Provost 4ae3a97e12 bridge tests: Test STP config BPDU validation
PR:		254924
Reviewed by:	donner
Differential Revision:	https://reviews.freebsd.org/D29783
2021-04-19 12:09:35 +02:00

467 lines
11 KiB
Bash
Executable File

# $FreeBSD$
#
# SPDX-License-Identifier: BSD-2-Clause-FreeBSD
#
# Copyright (c) 2020 The FreeBSD Foundation
#
# This software was developed by Kristof Provost under sponsorship
# from the FreeBSD Foundation.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
. $(atf_get_srcdir)/../common/vnet.subr
atf_test_case "bridge_transmit_ipv4_unicast" "cleanup"
bridge_transmit_ipv4_unicast_head()
{
atf_set descr 'bridge_transmit_ipv4_unicast bridging test'
atf_set require.user root
}
bridge_transmit_ipv4_unicast_body()
{
vnet_init
epair_alcatraz=$(vnet_mkepair)
epair_singsing=$(vnet_mkepair)
vnet_mkjail alcatraz ${epair_alcatraz}b
vnet_mkjail singsing ${epair_singsing}b
jexec alcatraz ifconfig ${epair_alcatraz}b 192.0.2.1/24 up
jexec singsing ifconfig ${epair_singsing}b 192.0.2.2/24 up
bridge=$(vnet_mkbridge)
ifconfig ${bridge} up
ifconfig ${epair_alcatraz}a up
ifconfig ${epair_singsing}a up
ifconfig ${bridge} addm ${epair_alcatraz}a
ifconfig ${bridge} addm ${epair_singsing}a
atf_check -s exit:0 -o ignore jexec alcatraz ping -c 3 -t 1 192.0.2.2
atf_check -s exit:0 -o ignore jexec singsing ping -c 3 -t 1 192.0.2.1
}
bridge_transmit_ipv4_unicast_cleanup()
{
vnet_cleanup
}
atf_test_case "stp" "cleanup"
stp_head()
{
atf_set descr 'Spanning tree test'
atf_set require.user root
}
stp_body()
{
vnet_init
epair_one=$(vnet_mkepair)
epair_two=$(vnet_mkepair)
bridge_a=$(vnet_mkbridge)
bridge_b=$(vnet_mkbridge)
vnet_mkjail a ${bridge_a} ${epair_one}a ${epair_two}a
vnet_mkjail b ${bridge_b} ${epair_one}b ${epair_two}b
jexec a ifconfig ${epair_one}a up
jexec a ifconfig ${epair_two}a up
jexec a ifconfig ${bridge_a} addm ${epair_one}a
jexec a ifconfig ${bridge_a} addm ${epair_two}a
jexec b ifconfig ${epair_one}b up
jexec b ifconfig ${epair_two}b up
jexec b ifconfig ${bridge_b} addm ${epair_one}b
jexec b ifconfig ${bridge_b} addm ${epair_two}b
jexec a ifconfig ${bridge_a} 192.0.2.1/24
# Enable spanning tree
jexec a ifconfig ${bridge_a} stp ${epair_one}a
jexec a ifconfig ${bridge_a} stp ${epair_two}a
jexec b ifconfig ${bridge_b} stp ${epair_one}b
jexec b ifconfig ${bridge_b} stp ${epair_two}b
jexec b ifconfig ${bridge_b} up
jexec a ifconfig ${bridge_a} up
# Give STP time to do its thing
sleep 5
a_discard=$(jexec a ifconfig ${bridge_a} | grep discarding)
b_discard=$(jexec b ifconfig ${bridge_b} | grep discarding)
if [ -z "${a_discard}" ] && [ -z "${b_discard}" ]
then
atf_fail "STP failed to detect bridging loop"
fi
# We must also have at least some forwarding interfaces
a_forwarding=$(jexec a ifconfig ${bridge_a} | grep forwarding)
b_forwarding=$(jexec b ifconfig ${bridge_b} | grep forwarding)
if [ -z "${a_forwarding}" ] && [ -z "${b_forwarding}" ]
then
atf_fail "STP failed to detect bridging loop"
fi
}
stp_cleanup()
{
vnet_cleanup
}
atf_test_case "stp_vlan" "cleanup"
stp_vlan_head()
{
atf_set descr 'Spanning tree on VLAN test'
atf_set require.user root
}
stp_vlan_body()
{
vnet_init
epair_one=$(vnet_mkepair)
epair_two=$(vnet_mkepair)
bridge_a=$(vnet_mkbridge)
bridge_b=$(vnet_mkbridge)
vnet_mkjail a ${bridge_a} ${epair_one}a ${epair_two}a
vnet_mkjail b ${bridge_b} ${epair_one}b ${epair_two}b
jexec a ifconfig ${epair_one}a up
jexec a ifconfig ${epair_two}a up
vlan_a_one=$(jexec a ifconfig vlan create vlandev ${epair_one}a vlan 42)
vlan_a_two=$(jexec a ifconfig vlan create vlandev ${epair_two}a vlan 42)
jexec a ifconfig ${vlan_a_one} up
jexec a ifconfig ${vlan_a_two} up
jexec a ifconfig ${bridge_a} addm ${vlan_a_one}
jexec a ifconfig ${bridge_a} addm ${vlan_a_two}
jexec b ifconfig ${epair_one}b up
jexec b ifconfig ${epair_two}b up
vlan_b_one=$(jexec b ifconfig vlan create vlandev ${epair_one}b vlan 42)
vlan_b_two=$(jexec b ifconfig vlan create vlandev ${epair_two}b vlan 42)
jexec b ifconfig ${vlan_b_one} up
jexec b ifconfig ${vlan_b_two} up
jexec b ifconfig ${bridge_b} addm ${vlan_b_one}
jexec b ifconfig ${bridge_b} addm ${vlan_b_two}
jexec a ifconfig ${bridge_a} 192.0.2.1/24
# Enable spanning tree
jexec a ifconfig ${bridge_a} stp ${vlan_a_one}
jexec a ifconfig ${bridge_a} stp ${vlan_a_two}
jexec b ifconfig ${bridge_b} stp ${vlan_b_one}
jexec b ifconfig ${bridge_b} stp ${vlan_b_two}
jexec b ifconfig ${bridge_b} up
jexec a ifconfig ${bridge_a} up
# Give STP time to do its thing
sleep 5
a_discard=$(jexec a ifconfig ${bridge_a} | grep discarding)
b_discard=$(jexec b ifconfig ${bridge_b} | grep discarding)
if [ -z "${a_discard}" ] && [ -z "${b_discard}" ]
then
atf_fail "STP failed to detect bridging loop"
fi
# We must also have at least some forwarding interfaces
a_forwarding=$(jexec a ifconfig ${bridge_a} | grep forwarding)
b_forwarding=$(jexec b ifconfig ${bridge_b} | grep forwarding)
if [ -z "${a_forwarding}" ] && [ -z "${b_forwarding}" ]
then
atf_fail "STP failed to detect bridging loop"
fi
}
stp_vlan_cleanup()
{
vnet_cleanup
}
atf_test_case "static" "cleanup"
static_head()
{
atf_set descr 'Bridge static address test'
atf_set require.user root
}
static_body()
{
vnet_init
epair=$(vnet_mkepair)
bridge=$(vnet_mkbridge)
vnet_mkjail one ${bridge} ${epair}a
ifconfig ${epair}b up
jexec one ifconfig ${bridge} up
jexec one ifconfig ${epair}a up
jexec one ifconfig ${bridge} addm ${epair}a
# Wrong interface
atf_check -s exit:1 -o ignore -e ignore \
jexec one ifconfig ${bridge} static ${epair}b 00:01:02:03:04:05
# Bad address format
atf_check -s exit:1 -o ignore -e ignore \
jexec one ifconfig ${bridge} static ${epair}a 00:01:02:03:04
# Correct add
atf_check -s exit:0 -o ignore \
jexec one ifconfig ${bridge} static ${epair}a 00:01:02:03:04:05
# List addresses
atf_check -s exit:0 -o ignore \
jexec one ifconfig ${bridge} addr
# Delete with bad address format
atf_check -s exit:1 -o ignore -e ignore \
jexec one ifconfig ${bridge} deladdr 00:01:02:03:04
# Delete with unlisted address
atf_check -s exit:1 -o ignore -e ignore \
jexec one ifconfig ${bridge} deladdr 00:01:02:03:04:06
# Correct delete
atf_check -s exit:0 -o ignore \
jexec one ifconfig ${bridge} deladdr 00:01:02:03:04:05
}
static_cleanup()
{
vnet_cleanup
}
atf_test_case "span" "cleanup"
span_head()
{
atf_set descr 'Bridge span test'
atf_set require.user root
}
span_body()
{
set -x
vnet_init
epair=$(vnet_mkepair)
epair_span=$(vnet_mkepair)
bridge=$(vnet_mkbridge)
vnet_mkjail one ${bridge} ${epair}a ${epair_span}a
ifconfig ${epair}b up
ifconfig ${epair_span}b up
jexec one ifconfig ${bridge} up
jexec one ifconfig ${epair}a up
jexec one ifconfig ${epair_span}a up
jexec one ifconfig ${bridge} addm ${epair}a
jexec one ifconfig ${bridge} span ${epair_span}a
jexec one ifconfig ${bridge} 192.0.2.1/24
# Send some traffic through the span
jexec one ping -c 1 -t 1 192.0.2.2
# Check that we see the traffic on the span interface
atf_check -s exit:0 \
$(atf_get_srcdir)/../netpfil/common/pft_ping.py \
--sendif ${epair}b \
--to 192.0.2.2 \
--recvif ${epair_span}b
jexec one ifconfig ${bridge} -span ${epair_span}a
# And no more traffic after we remove the span
atf_check -s exit:1 \
$(atf_get_srcdir)/../netpfil/common/pft_ping.py \
--sendif ${epair}b \
--to 192.0.2.2 \
--recvif ${epair_span}b
}
span_cleanup()
{
vnet_cleanup
}
atf_test_case "delete_with_members" "cleanup"
delete_with_members_head()
{
atf_set descr 'Delete a bridge which still has member interfaces'
atf_set require.user root
}
delete_with_members_body()
{
vnet_init
bridge=$(vnet_mkbridge)
epair=$(vnet_mkepair)
ifconfig ${bridge} 192.0.2.1/24 up
ifconfig ${epair}a up
ifconfig ${bridge} addm ${epair}a
ifconfig ${bridge} destroy
}
delete_with_members_cleanup()
{
vnet_cleanup
}
atf_test_case "mac_conflict" "cleanup"
mac_conflict_head()
{
atf_set descr 'Ensure that bridges in different jails get different mac addresses'
atf_set require.user root
}
mac_conflict_body()
{
vnet_init
epair=$(vnet_mkepair)
# Ensure the bridge module is loaded so jails can use it.
tmpbridge=$(vnet_mkbridge)
vnet_mkjail bridge_mac_conflict_one ${epair}a
vnet_mkjail bridge_mac_conflict_two ${epair}b
jexec bridge_mac_conflict_one ifconfig bridge create
jexec bridge_mac_conflict_one ifconfig bridge0 192.0.2.1/24 up \
addm ${epair}a
jexec bridge_mac_conflict_one ifconfig ${epair}a up
jexec bridge_mac_conflict_two ifconfig bridge create
jexec bridge_mac_conflict_two ifconfig bridge0 192.0.2.2/24 up \
addm ${epair}b
jexec bridge_mac_conflict_two ifconfig ${epair}b up
atf_check -s exit:0 -o ignore \
jexec bridge_mac_conflict_one ping -c 3 192.0.2.2
}
mac_conflict_cleanup()
{
vnet_cleanup
}
atf_test_case "inherit_mac" "cleanup"
inherit_mac_head()
{
atf_set descr 'Bridge inherit_mac test, #216510'
atf_set require.user root
}
inherit_mac_body()
{
vnet_init
bridge=$(vnet_mkbridge)
epair=$(vnet_mkepair)
vnet_mkjail one ${bridge} ${epair}a
jexec one sysctl net.link.bridge.inherit_mac=1
# Attempt to provoke the panic described in #216510
jexec one ifconfig ${bridge} 192.0.0.1/24 up
jexec one ifconfig ${bridge} addm ${epair}a
}
inherit_mac_cleanup()
{
vnet_cleanup
}
atf_test_case "stp_validation" "cleanup"
stp_validation_head()
{
atf_set descr 'Check STP validation'
atf_set require.user root
atf_set require.progs scapy
}
stp_validation_body()
{
vnet_init
epair_one=$(vnet_mkepair)
epair_two=$(vnet_mkepair)
bridge=$(vnet_mkbridge)
ifconfig ${bridge} up
ifconfig ${bridge} addm ${epair_one}a addm ${epair_two}a
ifconfig ${bridge} stp ${epair_one}a stp ${epair_two}a
ifconfig ${epair_one}a up
ifconfig ${epair_one}b up
ifconfig ${epair_two}a up
ifconfig ${epair_two}b up
# Wait until the interfaces are no longer discarding
while ifconfig ${bridge} | grep 'state discarding' >/dev/null
do
sleep 1
done
# Now inject invalid STP BPDUs on epair_one and see if they're repeated
# on epair_two
atf_check -s exit:0 \
$(atf_get_srcdir)/stp.py \
--sendif ${epair_one}b \
--recvif ${epair_two}b
}
stp_validation_cleanup()
{
vnet_cleanup
}
atf_init_test_cases()
{
atf_add_test_case "bridge_transmit_ipv4_unicast"
atf_add_test_case "stp"
atf_add_test_case "stp_vlan"
atf_add_test_case "static"
atf_add_test_case "span"
atf_add_test_case "inherit_mac"
atf_add_test_case "delete_with_members"
atf_add_test_case "mac_conflict"
atf_add_test_case "stp_validation"
}