freebsd-dev/sys/i386/isa/sound/sbcard.h
Seigo Tanimura fdba49eb7e Add support of SB for PC98 into VoxWare 3.5, and more $FreeBSD$.
Submitted by:		T.Yamaoka <taka@windows.squares.net>
Pressed to review by:	nyan
1999-12-27 04:37:19 +00:00

73 lines
2.0 KiB
C

/*
* file: sbcard.h
*
* $FreeBSD$
*
*/
extern int sbc_major, sbc_minor ;
/*
* sound blaster registers
*/
#ifdef PC98
#define DSP_RESET (sbc_base + 0x600)
#define DSP_READ (sbc_base + 0xA00)
#define DSP_WRITE (sbc_base + 0xC00)
#define DSP_COMMAND (sbc_base + 0xC00)
#define DSP_STATUS (sbc_base + 0xC00)
#define DSP_DATA_AVAIL (sbc_base + 0xE00)
#define DSP_DATA_AVL16 (sbc_base + 0xF00)
#define MIXER_ADDR (sbc_base + 0x400)
#define MIXER_DATA (sbc_base + 0x500)
#define OPL3_LEFT (sbc_base + 0x000)
#define OPL3_RIGHT (sbc_base + 0x200)
#define OPL3_BOTH (sbc_base + 0x800)
#else
#define DSP_RESET (sbc_base + 0x6)
#define DSP_READ (sbc_base + 0xA)
#define DSP_WRITE (sbc_base + 0xC)
#define DSP_COMMAND (sbc_base + 0xC)
#define DSP_STATUS (sbc_base + 0xC)
#define DSP_DATA_AVAIL (sbc_base + 0xE)
#define DSP_DATA_AVL16 (sbc_base + 0xF)
#define MIXER_ADDR (sbc_base + 0x4)
#define MIXER_DATA (sbc_base + 0x5)
#define OPL3_LEFT (sbc_base + 0x0)
#define OPL3_RIGHT (sbc_base + 0x2)
#define OPL3_BOTH (sbc_base + 0x8)
#endif
/*
* DSP Commands. There are many, and in many cases they are used explicitly
*/
#define DSP_CMD_SPKON 0xD1
#define DSP_CMD_SPKOFF 0xD3
#define DSP_CMD_DMAON 0xD0 /* ??? the comment says Halt DMA */
#define DSP_CMD_DMAOFF 0xD4 /* ??? comment says continue dma */
#define DSP_CMD_DMAHALT 0xD0
#define DSP_CMD_TCONST 0x40 /* set time constant */
#define DSP_CMD_HSSIZE 0x48 /* high speed dma count */
#define DSP_CMD_HSDAC 0x91 /* high speed dac */
#define DSP_CMD_HSADC 0x99 /* high speed adc */
#define DSP_CMD_DAC8 0x14 /* 8-bit dac (dma count) */
#define DSP_CMD_ADC8 0x24 /* 8-bit adc (dma count) */
#define DSP_CMD_GETVER 0xE1
#define DSP_CMD_GETID 0xE7 /* return id bytes */
#if 0 /*** unknown ***/
#endif
#define IMODE_NONE 0
#define IMODE_OUTPUT PCM_ENABLE_OUTPUT
#define IMODE_INPUT PCM_ENABLE_INPUT
#define IMODE_INIT 3
#define IMODE_MIDI 4
#define NORMAL_MIDI 0
#define UART_MIDI 1