d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4c42496690
freebsd-dev/sys/pci/tek390.c
eivind 86354cd8fc Staticize.
1998-02-09 06:11:36 +00:00

1710 lines
37 KiB
C
Raw Blame History

/***********************************************************************
* FILE NAME : TEK390.C *
* BY : C.L. Huang (ching@tekram.com.tw) *
* Description: Device Driver for Tekram DC-390(T) PCI SCSI *
* Bus Master Host Adapter *
* (C)Copyright 1995-1996 Tekram Technology Co., Ltd. *
***********************************************************************/
/***********************************************************************
* HISTORY: *
* *
* REV# DATE NAME DESCRIPTION *
* 1.00 07/02/96 CLH First release for RELEASE-2.1.0 *
* 1.01 08/20/96 CLH Update for RELEASE-2.1.5 *
* *
***********************************************************************/
/**************************************************************************
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************/
/* Imported into FreeBSD source repository, and updated to compile under */
/* FreeBSD-3.0-DEVELOPMENT, by Stefan Esser <se@FreeBSD.Org>, 1996-12-17 */
/**************************************************************************/
/* #define REL_2_1_0 */
#define REL_2_1_5
#define DC390_DEBUG
#include <sys/param.h>
/* XXX this doesn't actually compile unless KERNEL is defined. */
#ifdef KERNEL
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#endif /* KERNEL */
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <scsi/scsiconf.h>
#include <machine/clock.h>
#include <pci/tek390.h>
#define INT32 int32
#define U_INT32 u_int32
#define OutB(val, port) outb(port, val)
#define OutW(val, port) outw(port, val)
#define OutL(val, port) outl(port, val)
#define PCI_DEVICE_ID_AMD53C974 0x20201022ul
#define PCI_BASE_ADDR0 0x10
#ifdef REL_2_1_0
static int DC390_Interrupt (PACB pACB);
#endif
#ifdef REL_2_1_5
static void DC390_Interrupt (PACB pACB);
#endif
static USHORT DC390_StartSCSI( PACB pACB, PDCB pDCB, PSRB pSRB );
static void DC390_DataOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_DataIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_Command_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_Status_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_MsgOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_MsgIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_DataOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_DataInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_CommandPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_StatusPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_MsgOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_MsgInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_Nop_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void DC390_Nop_1( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void SetXferRate( PACB pACB, PDCB pDCB );
static void DC390_Disconnect( PACB pACB );
static void DC390_Reselect( PACB pACB );
static void SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB );
static void DoingSRB_Done( PACB pACB );
static void DC390_ScsiRstDetect( PACB pACB );
static void DC390_ResetSCSIBus( PACB pACB );
static void RequestSense( PACB pACB, PDCB pDCB, PSRB pSRB );
static void EnableMsgOut2( PACB pACB, PSRB pSRB );
static void EnableMsgOut( PACB pACB, PSRB pSRB );
static void DC390_InvalidCmd( PACB pACB );
/*
* XXX No timeouts are scheduled in this driver as the timeout handler
* doesn't do anything yet!!!
*/
static void DC390_reset (PACB pACB);
static PUCHAR phystovirt( PSRB pSRB, ULONG xferCnt );
static void DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd );
static void DC390_initSRB( PSRB psrb );
static void DC390_linkSRB( PACB pACB );
static void DC390_initACB( PACB pACB, ULONG io_port, UCHAR Irq,
USHORT index );
static int DC390_initAdapter( PACB pACB, ULONG io_port, UCHAR Irq,
USHORT index, pcici_t config_id );
void DC390_EnableCfg( USHORT mechnum, UCHAR regval );
void DC390_DisableCfg( USHORT mechnum );
UCHAR DC390_inByte( USHORT mechnum, UCHAR regval );
USHORT DC390_inWord( USHORT mechnum, UCHAR regval );
ULONG DC390_inDword(USHORT mechnum, UCHAR regval );
void DC390_OutB(USHORT mechnum, UCHAR regval, UCHAR bval );
static void DC390_EnDisableCE( UCHAR mode, USHORT mechnum, PUCHAR regval );
static void DC390_EEpromOutDI( USHORT mechnum, PUCHAR regval, USHORT Carry );
static UCHAR DC390_EEpromInDO( USHORT mechnum );
static USHORT EEpromGetData1( USHORT mechnum );
static void DC390_Prepare( USHORT mechnum, PUCHAR regval, UCHAR EEpromCmd );
static void DC390_ReadEEprom( USHORT mechnum, USHORT index );
static USHORT DC390_DefaultEEprom( USHORT mechnum, USHORT index );
static USHORT DC390_CheckEEpromCheckSum( USHORT MechNum, USHORT index );
static USHORT DC390_ToMech( USHORT Mechnum, pcici_t config_id );
#ifdef KERNEL
static char* trmamd_probe( pcici_t tag, pcidi_t type);
static void trmamd_attach( pcici_t tag, int unit);
#ifdef REL_2_1_0
static int32 trmamd_scsi_cmd( struct scsi_xfer *sx);
#endif
#ifdef REL_2_1_5
static int32_t trmamd_scsi_cmd( struct scsi_xfer *sx);
#endif
static void trmamd_min_phys( struct buf *pbuf);
#ifdef REL_2_1_0
static u_int32 trmamd_info( int unit );
#endif
#endif /* KERNEL */
static u_long trmamd_count;
static struct pci_device trmamd_device = {
"amd",
trmamd_probe,
trmamd_attach,
&trmamd_count,
NULL
};
DATA_SET (pcidevice_set, trmamd_device);
static struct scsi_adapter trmamd_switch =
{
trmamd_scsi_cmd,
trmamd_min_phys,
0,
0,
#ifdef REL_2_1_0
trmamd_info,
#endif
#ifdef REL_2_1_5
0,
#endif
"amd",
};
static struct scsi_device trmamd_dev =
{
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
"amd",
};
static PACB pACB0[MAX_ADAPTER_NUM]={0};
static PACB pACB_start= NULL;
static PACB pACB_current = NULL;
static PDCB pPrevDCB = NULL;
static USHORT adapterCnt = 0;
static USHORT CurrSyncOffset = 0;
static UCHAR CurrentID, CurrentLUN;
static PVOID DC390_phase0[]={
DC390_DataOut_0,
DC390_DataIn_0,
DC390_Command_0,
DC390_Status_0,
DC390_Nop_0,
DC390_Nop_0,
DC390_MsgOut_0,
DC390_MsgIn_0,
DC390_Nop_1
};
static PVOID DC390_phase1[]={
DC390_DataOutPhase,
DC390_DataInPhase,
DC390_CommandPhase,
DC390_StatusPhase,
DC390_Nop_0,
DC390_Nop_0,
DC390_MsgOutPhase,
DC390_MsgInPhase,
DC390_Nop_1,
};
static UCHAR eepromBuf[MAX_ADAPTER_NUM][128];
static UCHAR clock_period1[] = {4, 5, 6, 7 ,8, 10, 13, 20};
static UCHAR baddevname1[2][28] ={
"SEAGATE ST3390N ??? 9546",
"HP C3323-300 4269"};
#define BADDEVCNT 2
/***********************************************************************
*
*
*
**********************************************************************/
static PSRB
GetSRB( PACB pACB )
{
int flags;
PSRB pSRB;
flags = splbio();
pSRB = pACB->pFreeSRB;
if( pSRB )
{
pACB->pFreeSRB = pSRB->pNextSRB;
pSRB->pNextSRB = NULL;
}
splx(flags);
return( pSRB );
}
static void
RewaitSRB0( PDCB pDCB, PSRB pSRB )
{
PSRB psrb1;
int flags;
flags = splbio();
if( (psrb1 = pDCB->pWaitingSRB) )
{
pSRB->pNextSRB = psrb1;
pDCB->pWaitingSRB = pSRB;
}
else
{
pSRB->pNextSRB = NULL;
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitLast = pSRB;
}
splx(flags);
}
static void
RewaitSRB( PDCB pDCB, PSRB pSRB )
{
PSRB psrb1;
int flags;
UCHAR bval;
flags = splbio();
pDCB->GoingSRBCnt--;
psrb1 = pDCB->pGoingSRB;
if( pSRB == psrb1 )
{
pDCB->pGoingSRB = psrb1->pNextSRB;
}
else
{
while( pSRB != psrb1->pNextSRB )
psrb1 = psrb1->pNextSRB;
psrb1->pNextSRB = pSRB->pNextSRB;
if( pSRB == pDCB->pGoingLast )
pDCB->pGoingLast = psrb1;
}
if( (psrb1 = pDCB->pWaitingSRB) )
{
pSRB->pNextSRB = psrb1;
pDCB->pWaitingSRB = pSRB;
}
else
{
pSRB->pNextSRB = NULL;
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitLast = pSRB;
}
bval = pSRB->TagNumber;
pDCB->TagMask &= (~(1 << bval)); /* Free TAG number */
splx(flags);
}
static void
DoWaitingSRB( PACB pACB )
{
int flags;
PDCB ptr, ptr1;
PSRB pSRB;
flags = splbio();
if( !(pACB->pActiveDCB) && !(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV) ) )
{
ptr = pACB->pDCBRunRobin;
if( !ptr )
{
ptr = pACB->pLinkDCB;
pACB->pDCBRunRobin = ptr;
}
ptr1 = ptr;
for( ;ptr1; )
{
pACB->pDCBRunRobin = ptr1->pNextDCB;
if( !( ptr1->MaxCommand > ptr1->GoingSRBCnt ) ||
!( pSRB = ptr1->pWaitingSRB ) )
{
if(pACB->pDCBRunRobin == ptr)
break;
ptr1 = ptr1->pNextDCB;
}
else
{
if( !DC390_StartSCSI(pACB, ptr1, pSRB) )
{
ptr1->GoingSRBCnt++;
if( ptr1->pWaitLast == pSRB )
{
ptr1->pWaitingSRB = NULL;
ptr1->pWaitLast = NULL;
}
else
{
ptr1->pWaitingSRB = pSRB->pNextSRB;
}
pSRB->pNextSRB = NULL;
if( ptr1->pGoingSRB )
ptr1->pGoingLast->pNextSRB = pSRB;
else
ptr1->pGoingSRB = pSRB;
ptr1->pGoingLast = pSRB;
}
break;
}
}
}
splx(flags);
return;
}
static void
SRBwaiting( PDCB pDCB, PSRB pSRB)
{
if( pDCB->pWaitingSRB )
{
pDCB->pWaitLast->pNextSRB = pSRB;
pDCB->pWaitLast = pSRB;
pSRB->pNextSRB = NULL;
}
else
{
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitLast = pSRB;
}
}
static void
SendSRB( PSCSICMD pcmd, PACB pACB, PSRB pSRB )
{
int flags;
PDCB pDCB;
flags = splbio();
pDCB = pSRB->pSRBDCB;
if( !(pDCB->MaxCommand > pDCB->GoingSRBCnt) || (pACB->pActiveDCB) ||
(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV)) )
{
SRBwaiting(pDCB, pSRB);
goto SND_EXIT;
}
if( pDCB->pWaitingSRB )
{
SRBwaiting(pDCB, pSRB);
/* pSRB = GetWaitingSRB(pDCB); */
pSRB = pDCB->pWaitingSRB;
pDCB->pWaitingSRB = pSRB->pNextSRB;
pSRB->pNextSRB = NULL;
}
if( !DC390_StartSCSI(pACB, pDCB, pSRB) )
{
pDCB->GoingSRBCnt++;
if( pDCB->pGoingSRB )
{
pDCB->pGoingLast->pNextSRB = pSRB;
pDCB->pGoingLast = pSRB;
}
else
{
pDCB->pGoingSRB = pSRB;
pDCB->pGoingLast = pSRB;
}
}
else
RewaitSRB0( pDCB, pSRB );
SND_EXIT:
splx(flags);
return;
}
/***********************************************************************
* Function : static int32 dc390_scsi_cmd (struct scsi_xfer *cmd)
* Purpose : enqueues a SCSI command
***********************************************************************/
#ifdef REL_2_1_0
int32
#endif
#ifdef REL_2_1_5
int32_t
#endif
trmamd_scsi_cmd ( PSCSICMD cmd )
{
USHORT ioport, i;
PSCSICMD pcmd;
PSCLINK plink;
PACB pACB;
PDCB pDCB;
PSRB pSRB;
int flags, cflags, unit, CurrPgVaddr;
ULONG sglen, pglen, datalen, CurrPgPaddr, NextPgPaddr;
PUCHAR ptr,ptr1;
PSEG psg;
UCHAR sgc, sstatus;
plink = cmd->sc_link;
unit = plink->adapter_unit;
pACB = pACB0[unit];
ioport = pACB->IOPortBase;
#ifdef DC390_DEBUG0
printf("Cmd=%2x,ID=%d,LUN=%d,",cmd->cmd->opcode,
plink->target, plink->lun);
#endif
if( pACB->scan_devices )
{
if( (plink->target > CurrentID) ||
(plink->target == CurrentID) && (plink->lun >= CurrentLUN) )
{
CurrentID = plink->target;
CurrentLUN = plink->lun;
}
else
{
pACB->scan_devices = 0;
pPrevDCB->pNextDCB = pACB->pLinkDCB;
}
}
if ( ( plink->target > pACB->max_id ) || ( plink->lun > pACB->max_lun ) )
{
#ifdef DC390_DEBUG0
printf("DC390: Ignore target %d lun %d\n",
plink->target, plink->lun);
#endif
cmd->error = XS_DRIVER_STUFFUP;
return( COMPLETE );
}
if( (pACB->scan_devices) && !(pACB->DCBmap[plink->target] & (1 << plink->lun)) )
{
if( pACB->DeviceCnt < MAX_DEVICES )
{
pACB->DCBmap[plink->target] |= (1 << plink->lun);
pDCB = pACB->pDCB_free;
#ifdef DC390_DEBUG0
printf("pDCB=%8x,ID=%2x,", (UINT) pDCB, plink->target);
#endif
DC390_initDCB( pACB, pDCB, cmd );
}
else /* ???? */
{
#ifdef DC390_DEBUG0
printf("DC390: Ignore target %d lun %d\n",
plink->target, plink->lun);
#endif
cmd->error = XS_DRIVER_STUFFUP;
return( COMPLETE );
}
}
else if( !(pACB->scan_devices) && !(pACB->DCBmap[plink->target] & (1 << plink->lun)) )
{
#ifdef DC390_DEBUG0
printf("DC390: Ignore target %d lun %d\n",
plink->target, plink->lun);
#endif
cmd->error = XS_DRIVER_STUFFUP;
return( COMPLETE );
}
else
{
pDCB = pACB->pLinkDCB;
while( (pDCB->UnitSCSIID != plink->target) ||
(pDCB->UnitSCSILUN != plink->lun) )
{
pDCB = pDCB->pNextDCB;
}
#ifdef DC390_DEBUG0
printf("pDCB=%8x,ID=%2x,", (UINT) pDCB, plink->target);
#endif
}
cflags = cmd->flags;
if(cflags & SCSI_RESET)
{
DC390_reset (pACB);
cmd->error = XS_NOERROR;
return(COMPLETE);
}
if( cflags & ITSDONE )
{
printf("DC390: Is it done?\n");
cmd->flags &= ~ITSDONE;
}
if( !(cflags & INUSE) )
{
printf("DC390: In Use?\n");
cmd->flags |= INUSE;
}
cmd->error = 0;
cmd->resid = 0;
flags = splbio();
pcmd = cmd;
pSRB = GetSRB( pACB );
if( !pSRB )
{
pcmd->error = XS_DRIVER_STUFFUP;
splx(flags);
return( TRY_AGAIN_LATER);
}
/* BuildSRB(pSRB); */
pSRB->pSRBDCB = pDCB;
pSRB->pcmd = pcmd;
ptr = (PUCHAR) pSRB->CmdBlock;
ptr1 = (PUCHAR) pcmd->cmd;
pSRB->ScsiCmdLen = pcmd->cmdlen;
for(i=0; i< pcmd->cmdlen; i++)
{
*ptr = *ptr1;
ptr++;
ptr1++;
}
if( pcmd->datalen )
{
psg = (PSEG) &pSRB->SGsegment[0];
pSRB->pSegmentList = psg;
sgc = 0;
/* Set up the scatter gather list */
datalen = pcmd->datalen;
CurrPgVaddr = (int) pcmd->data;
CurrPgPaddr = vtophys(CurrPgVaddr);
while ((datalen) && (sgc < MAX_SG_ENTRY))
{
sglen = 0;
psg->SGXPtr = CurrPgPaddr;
NextPgPaddr = CurrPgPaddr;
while ((datalen) && (CurrPgPaddr == NextPgPaddr))
{
/*
* This page is contiguous (physically) with the the last,
* just extend the length
*/
NextPgPaddr = (CurrPgPaddr & (~(PAGELEN - 1))) + PAGELEN;
pglen = NextPgPaddr - CurrPgPaddr;
if( datalen < pglen )
pglen = datalen;
sglen += pglen;
datalen -= pglen;
CurrPgVaddr = (CurrPgVaddr & (~(PAGELEN - 1))) + PAGELEN;
if( datalen )
CurrPgPaddr = vtophys(CurrPgVaddr);
}
/*
next page isn't contiguous, finish this segment
*/
psg->SGXLen = sglen;
psg++;
sgc++;
}
pSRB->SGcount = sgc;
if (datalen)
{
printf("DC390: Out Of Segment Buffer!\n");
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
pcmd->error = XS_DRIVER_STUFFUP;
splx(flags);
return (HAD_ERROR);
}
}
else
pSRB->SGcount = 0;
pSRB->SGIndex = 0;
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = 0;
pSRB->MsgCnt = 0;
if( pDCB->DevType != SCSI_SEQACESS )
pSRB->RetryCnt = 1;
else
pSRB->RetryCnt = 0;
pSRB->SRBStatus = 0;
pSRB->SRBFlag = 0;
pSRB->SRBState = 0;
pSRB->TotalXferredLen = 0;
pSRB->SGPhysAddr = 0;
pSRB->SGToBeXferLen = 0;
pSRB->ScsiPhase = 0;
pSRB->EndMessage = 0;
splx(flags);
if( !(cflags & SCSI_NOMASK) )
{
flags = splbio();
SendSRB( pcmd, pACB, pSRB );
splx(flags);
return( SUCCESSFULLY_QUEUED);
}
else
{
SendSRB( pcmd, pACB, pSRB );
do
{
while(--pcmd->timeout)
{
DELAY(1000);
sstatus = inb( ioport+Scsi_Status );
if( sstatus & INTERRUPT )
break;
}
if( pcmd->timeout == 0 )
{
return(HAD_ERROR);
}
else
{
DC390_Interrupt( pACB );
}
}
while( !(pcmd->flags & ITSDONE) );
if( pcmd->error == XS_TIMEOUT)
return(HAD_ERROR);
else
return(COMPLETE);
}
}
void
trmamd_min_phys( struct buf *bp )
{
if (bp->b_bcount > ((MAX_SG_ENTRY - 1) * PAGELEN))
bp->b_bcount = ((MAX_SG_ENTRY - 1) * PAGELEN);
}
#ifdef REL_2_1_0
u_int32
trmamd_info( int unit )
{
return (MAX_CMD_PER_LUN); /* outstanding requests at a time per device */
}
#endif
static PUCHAR phystovirt( PSRB pSRB, ULONG xferCnt )
{
int dataPtr;
PSCSICMD pcmd;
UCHAR i;
PSEG pseg;
pcmd = pSRB->pcmd;
dataPtr = (int) pcmd->data;
pseg = pSRB->SGsegment;
for(i=0; i < pSRB->SGIndex; i++)
{
dataPtr += (int) pseg->SGXLen;
pseg++;
}
dataPtr += (int) xferCnt;
return( (PUCHAR) dataPtr);
}
/***********************************************************************
* Function : int DC390_abort (SCSICMD *cmd)
*
* Purpose : Abort an errant SCSI command
*
* Inputs : cmd - command to abort
*
* Returns : 0 on success, -1 on failure.
***********************************************************************/
/*
int
DC390_abort (SCSICMD *cmd)
{
int flags;
PACB pACB;
PDCB pDCB, pdcb;
PSRB pSRB, psrb;
USHORT count, i;
PSCSICMD pcmd, pcmd1;
int status;
#ifdef DC390_DEBUG0
printf("DC390 : Abort Cmd.");
#endif
flags = splbio();
pACB = (PACB) cmd->host->hostdata;
pDCB = pACB->pLinkDCB;
pdcb = pDCB;
while( (pDCB->UnitSCSIID != cmd->sc_link->target) ||
(pDCB->UnitSCSILUN != cmd->sc_link->lun) )
{
pDCB = pDCB->pNextDCB;
if( pDCB == pdcb )
goto NOT_RUN;
}
pSRB = pDCB->pWaitingSRB;
if( !pSRB )
goto ON_GOING;
if( pSRB->pcmd == cmd )
{
pDCB->pWaitingSRB = pSRB->pNextSRB;
goto IN_WAIT;
}
else
{
psrb = pSRB;
while( psrb->pNextSRB->pcmd != cmd )
{
psrb = psrb->pNextSRB;
if( !psrb )
goto ON_GOING;
}
pSRB = psrb->pNextSRB;
psrb->pNextSRB = pSRB->pNextSRB;
if( pSRB == pDCB->pWaitLast )
pDCB->pWaitLast = psrb;
IN_WAIT:
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
cmd->next = NULL;
status = SCSI_ABORT_SUCCESS;
goto ABO_X;
}
ON_GOING:
pSRB = pDCB->pGoingSRB;
for( count = pDCB->GoingSRBCnt, i=0; i<count; i++)
{
if( pSRB->pcmd != cmd )
pSRB = pSRB->pNextSRB;
else
{
if( (pACB->pActiveDCB == pDCB) && (pDCB->pActiveSRB == pSRB) )
{
status = SCSI_ABORT_BUSY;
goto ABO_X;
}
else
{
status = SCSI_ABORT_SNOOZE;
goto ABO_X;
}
}
}
NOT_RUN:
status = SCSI_ABORT_NOT_RUNNING;
ABO_X:
cmd->error = XS_NOERROR;
scsi_done(cmd);
splx(flags);
return( status );
}
*/
static void
ResetDevParam( PACB pACB )
{
PDCB pDCB, pdcb;
pDCB = pACB->pLinkDCB;
if( pDCB == NULL )
return;
pdcb = pDCB;
do
{
pDCB->SyncMode &= ~SYNC_NEGO_DONE;
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
pDCB->CtrlR3 = FAST_CLK;
pDCB->CtrlR4 &= NEGATE_REQACKDATA;
pDCB->CtrlR4 |= EATER_25NS;
pDCB = pDCB->pNextDCB;
}
while( pdcb != pDCB );
}
static void
RecoverSRB( PACB pACB )
{
PDCB pDCB, pdcb;
PSRB psrb, psrb2;
USHORT cnt, i;
pDCB = pACB->pLinkDCB;
if( pDCB == NULL )
return;
pdcb = pDCB;
do
{
cnt = pdcb->GoingSRBCnt;
psrb = pdcb->pGoingSRB;
for (i=0; i<cnt; i++)
{
psrb2 = psrb;
psrb = psrb->pNextSRB;
/* RewaitSRB( pDCB, psrb ); */
if( pdcb->pWaitingSRB )
{
psrb2->pNextSRB = pdcb->pWaitingSRB;
pdcb->pWaitingSRB = psrb2;
}
else
{
pdcb->pWaitingSRB = psrb2;
pdcb->pWaitLast = psrb2;
psrb2->pNextSRB = NULL;
}
}
pdcb->GoingSRBCnt = 0;
pdcb->pGoingSRB = NULL;
pdcb->TagMask = 0;
pdcb = pdcb->pNextDCB;
}
while( pdcb != pDCB );
}
/***********************************************************************
* Function : DC390_reset (PACB pACB)
*
* Purpose : perform a hard reset on the SCSI bus( and AMD chip).
*
* Inputs : cmd - command which caused the SCSI RESET
*
***********************************************************************/
static void
DC390_reset (PACB pACB)
{
USHORT ioport;
int flags;
UCHAR bval;
USHORT i;
#ifdef DC390_DEBUG0
printf("DC390: RESET,");
#endif
flags = splbio();
ioport = pACB->IOPortBase;
bval = inb(ioport+CtrlReg1);
bval |= DIS_INT_ON_SCSI_RST;
OutB(bval,ioport+CtrlReg1); /* disable interrupt */
DC390_ResetSCSIBus( pACB );
for( i=0; i<500; i++ )
DELAY(1000);
bval = inb(ioport+CtrlReg1);
bval &= ~DIS_INT_ON_SCSI_RST;
OutB(bval,ioport+CtrlReg1); /* re-enable interrupt */
bval = DMA_IDLE_CMD;
OutB(bval,ioport+DMA_Cmd);
bval = CLEAR_FIFO_CMD;
OutB(bval,ioport+ScsiCmd);
ResetDevParam( pACB );
DoingSRB_Done( pACB );
pACB->pActiveDCB = NULL;
pACB->ACBFlag = 0;
DoWaitingSRB( pACB );
splx(flags);
return;
}
#include <pci/scsiiom.c>
/***********************************************************************
* Function : static void DC390_initDCB
*
* Purpose : initialize the internal structures for a given DCB
*
* Inputs : cmd - pointer to this scsi cmd request block structure
*
***********************************************************************/
static void
DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd )
{
PEEprom prom;
UCHAR bval;
USHORT index;
PSCLINK plink;
if( pACB->DeviceCnt == 0 )
{
pACB->pLinkDCB = pDCB;
pACB->pDCBRunRobin = pDCB;
pDCB->pNextDCB = pDCB;
pPrevDCB = pDCB;
}
else
pPrevDCB->pNextDCB = pDCB;
plink = cmd->sc_link;
pDCB->pDCBACB = pACB;
pDCB->UnitSCSIID = plink->target;
pDCB->UnitSCSILUN = plink->lun;
pDCB->pWaitingSRB = NULL;
pDCB->pGoingSRB = NULL;
pDCB->GoingSRBCnt = 0;
pDCB->pActiveSRB = NULL;
pDCB->TagMask = 0;
pDCB->MaxCommand = 1;
pDCB->AdaptIndex = pACB->AdapterIndex;
index = pACB->AdapterIndex;
pDCB->DCBFlag = 0;
prom = (PEEprom) &eepromBuf[index][plink->target << 2];
pDCB->DevMode = prom->EE_MODE1;
pDCB->AdpMode = eepromBuf[index][EE_MODE2];
if( pDCB->DevMode & EN_DISCONNECT_ )
bval = 0xC0;
else
bval = 0x80;
bval |= plink->lun;
pDCB->IdentifyMsg = bval;
pDCB->SyncMode = 0;
if( pDCB->DevMode & SYNC_NEGO_ )
{
if( !(plink->lun) || CurrSyncOffset )
pDCB->SyncMode = SYNC_ENABLE;
}
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
pDCB->NegoPeriod = (clock_period1[prom->EE_SPEED] * 25) >> 2;
pDCB->CtrlR1 = pACB->AdaptSCSIID;
if( pDCB->DevMode & PARITY_CHK_ )
pDCB->CtrlR1 |= PARITY_ERR_REPO;
pDCB->CtrlR3 = FAST_CLK;
pDCB->CtrlR4 = EATER_25NS;
if( pDCB->AdpMode & ACTIVE_NEGATION)
pDCB->CtrlR4 |= NEGATE_REQACKDATA;
}
/***********************************************************************
* Function : static void DC390_initSRB
*
* Purpose : initialize the internal structures for a given SRB
*
* Inputs : psrb - pointer to this scsi request block structure
*
***********************************************************************/
static void
DC390_initSRB( PSRB psrb )
{
psrb->PhysSRB = vtophys( psrb );
}
static void
DC390_linkSRB( PACB pACB )
{
USHORT count, i;
PSRB psrb;
count = pACB->SRBCount;
for( i=0; i< count; i++)
{
if( i != count - 1)
pACB->SRB_array[i].pNextSRB = &pACB->SRB_array[i+1];
else
pACB->SRB_array[i].pNextSRB = NULL;
psrb = (PSRB) &pACB->SRB_array[i];
DC390_initSRB( psrb );
}
}
/***********************************************************************
* Function : static void DC390_initACB
*
* Purpose : initialize the internal structures for a given SCSI host
*
* Inputs : psh - pointer to this host adapter's structure
*
***********************************************************************/
static void
DC390_initACB( PACB pACB, ULONG io_port, UCHAR Irq, USHORT index )
{
USHORT i;
pACB->max_id = 7;
if( pACB->max_id == eepromBuf[index][EE_ADAPT_SCSI_ID] )
pACB->max_id--;
if( eepromBuf[index][EE_MODE2] & LUN_CHECK )
pACB->max_lun = 7;
else
pACB->max_lun = 0;
pACB->IOPortBase = (USHORT) io_port;
pACB->pLinkDCB = NULL;
pACB->pDCBRunRobin = NULL;
pACB->pActiveDCB = NULL;
pACB->pFreeSRB = pACB->SRB_array;
pACB->SRBCount = MAX_SRB_CNT;
pACB->AdapterIndex = index;
pACB->status = 0;
pACB->AdaptSCSIID = eepromBuf[index][EE_ADAPT_SCSI_ID];
pACB->HostID_Bit = (1 << pACB->AdaptSCSIID);
pACB->AdaptSCSILUN = 0;
pACB->DeviceCnt = 0;
pACB->IRQLevel = Irq;
pACB->TagMaxNum = (eepromBuf[index][EE_TAG_CMD_NUM]) << 2;
pACB->ACBFlag = 0;
pACB->scan_devices = 1;
pACB->Gmode2 = eepromBuf[index][EE_MODE2];
if( eepromBuf[index][EE_MODE2] & LUN_CHECK )
pACB->LUNchk = 1;
pACB->pDCB_free = &pACB->DCB_array[0];
DC390_linkSRB( pACB );
pACB->pTmpSRB = &pACB->TmpSRB;
DC390_initSRB( pACB->pTmpSRB );
for(i=0; i<MAX_SCSI_ID; i++)
pACB->DCBmap[i] = 0;
pACB->ScsiLink.adapter_unit = index;
pACB->ScsiLink.adapter_targ = pACB->AdaptSCSIID;
pACB->ScsiLink.fordriver = 0;
pACB->ScsiLink.opennings = 2;
pACB->ScsiLink.adapter = &trmamd_switch;
pACB->ScsiLink.device = &trmamd_dev;
pACB->ScsiLink.flags = 0;
}
/***********************************************************************
* Function : static int DC390_initAdapter
*
* Purpose : initialize the SCSI chip ctrl registers
*
* Inputs : psh - pointer to this host adapter's structure
*
***********************************************************************/
static int DC390_initAdapter( PACB pACB, ULONG io_port, UCHAR Irq,
USHORT index,
pcici_t config_id )
{
USHORT ioport;
UCHAR bval;
#ifdef CHECK_SHARE_INT
PACB pacb;
USHORT used_irq = 0;
pacb = pACB_start;
if( pacb != NULL )
{
for ( ; (pacb != (PACB) -1) ; )
{
if( pacb->IRQLevel == Irq )
{
used_irq = 1;
break;
}
else
pacb = pacb->pNextACB;
}
}
if( !used_irq )
{
#endif
if( !pci_map_int (config_id, (PVOID)DC390_Interrupt, pACB, &bio_imask) )
{
if(bootverbose)
printf("DC390: register Interrupt handler error!\n");
return( -1 );
}
#ifdef CHECK_SHARE_INT
}
#endif
ioport = (USHORT) io_port;
bval = 153; /* 250ms selection timeout */
OutB(bval,ioport+Scsi_TimeOut);
bval = CLK_FREQ_40MHZ; /* Conversion factor = 0 , 40MHz clock */
OutB(bval,ioport+Clk_Factor);
bval = NOP_CMD; /* NOP cmd - clear command register */
OutB(bval,ioport+ScsiCmd);
bval = EN_FEATURE+EN_SCSI2_CMD; /* Enable Feature and SCSI-2 */
OutB(bval,ioport+CtrlReg2);
bval = FAST_CLK; /* fast clock */
OutB(bval,ioport+CtrlReg3);
bval = EATER_25NS;
if( eepromBuf[index][EE_MODE2] & ACTIVE_NEGATION )
bval |= NEGATE_REQACKDATA;
OutB(bval,ioport+CtrlReg4);
bval = DIS_INT_ON_SCSI_RST; /* Disable SCSI bus reset interrupt */
OutB(bval,ioport+CtrlReg1);
return(0);
}
#ifdef PCI_COMPAT
static pcicfgregs *cfg;
#define DC390_EnableCfg(a,b)
#define DC390_DisableCfg(a)
#define DC390_inByte(a,reg) pci_cfgread(cfg,reg,1)
#define DC390_inWord(a,reg) pci_cfgread(cfg,reg,2)
#define DC390_inDword(a,reg) pci_cfgread(cfg,reg,4)
#define DC390_OutB(a,reg,val) pci_cfgwrite(cfg,reg,val,1)
#else
void
DC390_EnableCfg( USHORT mechnum, UCHAR regval )
{
ULONG wlval;
if(mechnum == 2)
{
OutB(mech2bus, PCI_CFG2_FORWARD_REG);
OutB(mech2CfgSPenR, PCI_CFG2_ENABLE_REG);
}
else
{
regval &= 0xFC;
wlval = mech1addr;
wlval |= (((ULONG)regval) & 0xff);
OutL(wlval, PCI_CFG1_ADDRESS_REG);
}
}
void
DC390_DisableCfg( USHORT mechnum )
{
if(mechnum == 2)
OutB(0, PCI_CFG2_ENABLE_REG);
else
OutL(0, PCI_CFG1_ADDRESS_REG);
}
UCHAR
DC390_inByte( USHORT mechnum, UCHAR regval )
{
UCHAR bval;
USHORT wval;
int flags;
flags = splbio();
DC390_EnableCfg( mechnum, regval );
if(mechnum == 2)
{
wval = mech2Agent;
wval <<= 8;
wval |= ((USHORT) regval) & 0xff;
bval = inb(wval);
}
else
{
regval &= 3;
bval = inb(PCI_CFG1_DATA_REG | regval);
}
DC390_DisableCfg(mechnum);
splx(flags);
return(bval);
}
USHORT
DC390_inWord( USHORT mechnum, UCHAR regval )
{
USHORT wval;
int flags;
flags = splbio();
DC390_EnableCfg(mechnum,regval);
if(mechnum == 2)
{
wval = mech2Agent;
wval <<= 8;
wval |= regval;
wval = inw(wval);
}
else
{
regval &= 3;
wval = inw(PCI_CFG1_DATA_REG | regval);
}
DC390_DisableCfg(mechnum);
splx(flags);
return(wval);
}
ULONG
DC390_inDword(USHORT mechnum, UCHAR regval )
{
ULONG wlval;
int flags;
USHORT wval;
flags = splbio();
DC390_EnableCfg(mechnum,regval);
if(mechnum == 2)
{
wval = mech2Agent;
wval <<= 8;
wval |= regval;
wlval = inl(wval);
}
else
{
wlval = inl(PCI_CFG1_DATA_REG);
}
DC390_DisableCfg(mechnum);
splx(flags);
return(wlval);
}
void
DC390_OutB(USHORT mechnum, UCHAR regval, UCHAR bval )
{
USHORT wval;
int flags;
flags = splbio();
DC390_EnableCfg(mechnum,regval);
if(mechnum == 2)
{
wval = mech2Agent;
wval <<= 8;
wval |= regval;
OutB(bval, wval);
}
else
{
regval &= 3;
OutB(bval, PCI_CFG1_DATA_REG | regval);
}
DC390_DisableCfg(mechnum);
splx(flags);
}
#endif /PCI_COMPAT */
static void
DC390_EnDisableCE( UCHAR mode, USHORT mechnum, PUCHAR regval )
{
UCHAR bval;
bval = 0;
if(mode == ENABLE_CE)
*regval = 0xc0;
else
*regval = 0x80;
DC390_OutB(mechnum,*regval,bval);
if(mode == DISABLE_CE)
DC390_OutB(mechnum,*regval,bval);
DELAY(160);
}
static void
DC390_EEpromOutDI( USHORT mechnum, PUCHAR regval, USHORT Carry )
{
UCHAR bval;
bval = 0;
if(Carry)
{
bval = 0x40;
*regval = 0x80;
DC390_OutB(mechnum,*regval,bval);
}
DELAY(160);
bval |= 0x80;
DC390_OutB(mechnum,*regval,bval);
DELAY(160);
bval = 0;
DC390_OutB(mechnum,*regval,bval);
DELAY(160);
}
static UCHAR
DC390_EEpromInDO( USHORT mechnum )
{
UCHAR bval,regval;
regval = 0x80;
bval = 0x80;
DC390_OutB(mechnum,regval,bval);
DELAY(160);
bval = 0x40;
DC390_OutB(mechnum,regval,bval);
DELAY(160);
regval = 0x0;
bval = DC390_inByte(mechnum,regval);
if(bval == 0x22)
return(1);
else
return(0);
}
static USHORT
EEpromGetData1( USHORT mechnum )
{
UCHAR i;
UCHAR carryFlag;
USHORT wval;
wval = 0;
for(i=0; i<16; i++)
{
wval <<= 1;
carryFlag = DC390_EEpromInDO(mechnum);
wval |= carryFlag;
}
return(wval);
}
static void
DC390_Prepare( USHORT mechnum, PUCHAR regval, UCHAR EEpromCmd )
{
UCHAR i,j;
USHORT carryFlag;
carryFlag = 1;
j = 0x80;
for(i=0; i<9; i++)
{
DC390_EEpromOutDI(mechnum,regval,carryFlag);
carryFlag = (EEpromCmd & j) ? 1 : 0;
j >>= 1;
}
}
static void
DC390_ReadEEprom( USHORT mechnum, USHORT index )
{
UCHAR regval,cmd;
PUSHORT ptr;
USHORT i;
ptr = (PUSHORT) &eepromBuf[index][0];
cmd = EEPROM_READ;
for(i=0; i<0x40; i++)
{
DC390_EnDisableCE(ENABLE_CE, mechnum, &regval);
DC390_Prepare(mechnum, &regval, cmd);
*ptr = EEpromGetData1(mechnum);
ptr++;
cmd++;
DC390_EnDisableCE(DISABLE_CE,mechnum,&regval);
}
}
static USHORT
DC390_DefaultEEprom( USHORT mechnum, USHORT index )
{
PUCHAR ptr;
USHORT i;
ptr = (PUCHAR) &eepromBuf[index][0];
bzero (ptr, sizeof eepromBuf[index]);
for(i=0; i<0x40; i++)
{
*ptr = (TAG_QUEUING_|EN_DISCONNECT_|SYNC_NEGO_|PARITY_CHK_);
ptr += 4;
}
eepromBuf[index][EE_ADAPT_SCSI_ID] = 7;
eepromBuf[index][EE_MODE2] = (LUN_CHECK|ACTIVE_NEGATION);
eepromBuf[index][EE_TAG_CMD_NUM] = 4;
return 0;
}
static USHORT
DC390_CheckEEpromCheckSum( USHORT MechNum, USHORT index )
{
USHORT wval, rc, *ptr;
UCHAR i;
DC390_ReadEEprom( MechNum, index );
wval = 0;
ptr = (PUSHORT) &eepromBuf[index][0];
for(i=0; i<128 ;i+=2, ptr++)
wval += *ptr;
if( wval == 0x1234 )
rc = 0;
else
rc = DC390_DefaultEEprom( MechNum, index);
return( rc );
}
static USHORT
DC390_ToMech( USHORT Mechnum, pcici_t config_id )
{
#ifdef PCI_COMPAT
cfg = config_id;
#else
if(Mechnum == 2)
{
mech2bus = config_id.cfg2.forward; /* Bus num */
mech2Agent = config_id.cfg2.port >> 8; /* Dev num */
mech2CfgSPenR = config_id.cfg2.enable; /* Fun num */
}
else /* use mech #1 method */
{
mech1addr = config_id.cfg1;
}
#endif /* PCI_COMPAT */
return(0);
}
/***********************************************************************
* Function : static int DC390_init (struct Scsi_Host *host)
*
* Purpose : initialize the internal structures for a given SCSI host
*
* Inputs : host - pointer to this host adapter's structure/
*
* Preconditions : when this function is called, the chip_type
* field of the pACB structure MUST have been set.
***********************************************************************/
static int
DC390_init( ULONG io_port, UCHAR Irq, USHORT index, USHORT MechNum,
pcici_t config_id)
{
PACB pACB;
if( !DC390_CheckEEpromCheckSum( MechNum, index) )
{
pACB = (PACB) malloc (sizeof (struct _ACB), M_DEVBUF, M_WAITOK);
if( !pACB )
{
printf("DC390%d: cannot allocate ACB !\n", index);
return( -1 );
}
bzero (pACB, sizeof (struct _ACB));
DC390_initACB( pACB, io_port, Irq, index );
if( !DC390_initAdapter( pACB, io_port, Irq, index, config_id) )
{
if( !pACB_start )
{
pACB_start = pACB;
pACB_current = pACB;
pACB->pNextACB = (PACB) -1;
}
else
{
pACB_current->pNextACB = pACB;
pACB_current = pACB;
pACB->pNextACB = (PACB) -1;
}
pACB0[index] = pACB;
#ifdef DC390_DEBUG0
printf("DC390: pACB = %8x, pDCB_array = %8x, pSRB_array = %8x\n",
(UINT) pACB, (UINT) pACB->DCB_array, (UINT) pACB->SRB_array);
printf("DC390: ACB size= %4x, DCB size= %4x, SRB size= %4x\n",
sizeof(DC390_ACB), sizeof(DC390_DCB), sizeof(DC390_SRB) );
#endif
return( 0 );
}
else
{
free( pACB, M_DEVBUF);
return( -1 );
}
}
else
{
printf("DC390_init: EEPROM reading error!\n");
return( -1 );
}
}
void
trmamd_attach (pcici_t config_id, int unit)
{
struct scsibus_data *scbus;
UCHAR irq;
USHORT MechNum;
ULONG io_port, wlval;
PACB pACB = 0;
int flags;
if( unit >= MAX_ADAPTER_NUM )
return;
if( pACB0[unit] )
return;
CurrentID = 0;
CurrentLUN = 0;
MechNum = pci_mechanism;
#ifdef DC390_DEBUG0
if(bootverbose)
printf("DC390: Mech=%2x,\n",(UCHAR) MechNum);
#endif
if( !DC390_ToMech( MechNum, config_id ) )
{
wlval = DC390_inDword( MechNum, PCI_ID_REG);
if(wlval == PCI_DEVICE_ID_AMD53C974 )
{
io_port =DC390_inDword(MechNum,PCI_BASE_ADDR0) & 0xFFFE;
irq = DC390_inByte( MechNum, PCI_INTERRUPT_REG);
#ifdef DC390_DEBUG0
if(bootverbose)
printf("DC390: IO_PORT=%4x,IRQ=%x,\n",(UINT) io_port, irq);
#endif
if( !DC390_init( io_port, irq, (USHORT) unit, MechNum, config_id) )
{
adapterCnt++;
}
else
return;
}
}
pACB = pACB0[unit];
/*
Now let the generic SCSI driver look for the SCSI devices on the bus
*/
flags = splbio();
scbus = scsi_alloc_bus();
if(!scbus)
{
splx(flags);
return;
}
scbus->adapter_link = &pACB->ScsiLink;
scbus->maxtarg = pACB->max_id;
#ifdef DC390_DEBUG
if(bootverbose)
printf("\nDC390: scanning for devices ...\n\n");
#endif
scsi_attachdevs (scbus);
scbus = NULL; /* Upper-level SCSI code owns this now */
#ifdef DC390_DEBUG
if(bootverbose)
printf("\n\nDC390: Attach devices return\n");
#endif
splx(flags);
}
static char*
trmamd_probe (pcici_t tag, pcidi_t type)
{
if( type == PCI_DEVICE_ID_AMD53C974 )
return ("amd 53c974 scsi");
else
return (NULL);
}
Reference in New Issue View Git Blame Copy Permalink