freebsd-dev/sys/arm/amlogic/aml8726/aml8726_mmc.h
Ganbold Tsagaankhuu 033d737ab5 Update Amlogic MMC driver:
1) Advertise the actual min / max speeds the hardware is capable
       of supporting given the reference clock used by the board.

  2) Rather than attempting to extend the hardware's timeout register
       in software (the hardware doesn't have sufficient bits to directly
            support long timeouts), simply implement the same timeout approach
	         used in the SDXC driver.

  3) Set the timeout for a linked command (e.g. STOP TRANSMISSION) based
       on the previous multiblock read / write.

The changes have been smoke tested on both the ODROID-C1 and the VSATV102-M6
using the following cards:

* PQI 2GB microSD
* SanDisk 2GB microSD
* PQI 8GB SDHC (not a microSD so only tested on the ATV-102)
* PNY 8GB microSDHC
* SanDisk Ultra 32GB microSDHC

Submitted by:  John Wehle
2015-04-28 08:27:44 +00:00

124 lines
4.7 KiB
C

/*-
* Copyright 2013-2015 John Wehle <john@feith.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _ARM_AMLOGIC_AML8726_MMC_H
#define _ARM_AMLOGIC_AML8726_MMC_H
#define AML_MMC_ALIGN_DMA 4
#define AML_MMC_MAX_DMA 4096
/*
* Timeouts are in milliseconds
*
* Read and write are per section 4.6.2 of the:
*
* SD Specifications Part 1
* Physicaly Layer Simplified Specification
* Version 4.10
*/
#define AML_MMC_CMD_TIMEOUT 50
#define AML_MMC_READ_TIMEOUT 100
#define AML_MMC_WRITE_TIMEOUT 500
#define AML_MMC_MAX_TIMEOUT 5000
#define AML_MMC_CMD_ARGUMENT_REG 0
#define AML_MMC_CMD_SEND_REG 4
#define AML_MMC_CMD_REP_PKG_CNT_MASK (0xffU << 24)
#define AML_MMC_CMD_REP_PKG_CNT_SHIFT 24
#define AML_MMC_CMD_CMD_HAS_DATA (1 << 20)
#define AML_MMC_CMD_CHECK_DAT0_BUSY (1 << 19)
#define AML_MMC_CMD_RESP_CRC7_FROM_8 (1 << 18)
#define AML_MMC_CMD_RESP_HAS_DATA (1 << 17)
#define AML_MMC_CMD_RESP_NO_CRC7 (1 << 16)
#define AML_MMC_CMD_RESP_BITS_MASK (0xff << 8)
#define AML_MMC_CMD_RESP_BITS_SHIFT 8
#define AML_MMC_CMD_START_BIT (0 << 7)
#define AML_MMC_CMD_TRANS_BIT_HOST (1 << 6)
#define AML_MMC_CMD_INDEX_MASK 0x3f
#define AML_MMC_CMD_INDEX_SHIFT 0
#define AML_MMC_CONFIG_REG 8
#define AML_MMC_CONFIG_WR_CRC_STAT_MASK (7U << 29)
#define AML_MMC_CONFIG_WR_CRC_STAT_SHIFT 29
#define AML_MMC_CONFIG_WR_DELAY_MASK (0x3f << 23)
#define AML_MMC_CONFIG_WR_DELAY_SHIFT 23
#define AML_MMC_CONFIG_DMA_ENDIAN_MASK (3 << 21)
#define AML_MMC_CONFIG_DMA_ENDIAN_NC (0 << 21)
#define AML_MMC_CONFIG_DMA_ENDIAN_SB (1 << 21)
#define AML_MMC_CONFIG_DMA_ENDIAN_SW (2 << 21)
#define AML_MMC_CONFIG_DMA_ENDIAN_SBW (3 << 21)
#define AML_MMC_CONFIG_BUS_WIDTH_MASK (1 << 20)
#define AML_MMC_CONFIG_BUS_WIDTH_1 (0 << 20)
#define AML_MMC_CONFIG_BUS_WIDTH_4 (1 << 20)
#define AML_MMC_CONFIG_DATA_NEG_EDGE (1 << 19)
#define AML_MMC_CONFIG_DONT_DELAY_DATA (1 << 18)
#define AML_MMC_CONFIG_CMD_ARG_BITS_MASK (0x3f << 12)
#define AML_MMC_CONFIG_CMD_ARG_BITS_SHIFT 12
#define AML_MMC_CONFIG_CMD_POS_EDGE (1 << 11)
#define AML_MMC_CONFIG_CMD_NO_CRC (1 << 10)
#define AML_MMC_CONFIG_CMD_CLK_DIV_MASK 0x3ff
#define AML_MMC_CONFIG_CMD_CLK_DIV_SHIFT 0
#define AML_MMC_IRQ_STATUS_REG 12
#define AML_MMC_IRQ_STATUS_TIMER_CNT_MASK (0x1fffU << 19)
#define AML_MMC_IRQ_STATUS_TIMER_CNT_SHIFT 19
#define AML_MMC_IRQ_STATUS_TIMER_EN (1 << 18)
#define AML_MMC_IRQ_STATUS_TIMEOUT_IRQ (1 << 16)
#define AML_MMC_IRQ_STATUS_CMD_DONE_IRQ (1 << 9)
#define AML_MMC_IRQ_STATUS_WR_CRC16_OK (1 << 7)
#define AML_MMC_IRQ_STATUS_RD_CRC16_OK (1 << 6)
#define AML_MMC_IRQ_STATUS_RESP_CRC7_OK (1 << 5)
#define AML_MMC_IRQ_STATUS_CMD_BUSY (1 << 4)
#define AML_MMC_IRQ_STATUS_CLEAR_IRQ 0x10700
#define AML_MMC_IRQ_CONFIG_REG 16
#define AML_MMC_IRQ_CONFIG_SOFT_RESET (1 << 15)
#define AML_MMC_IRQ_CONFIG_CMD_DONE_EN (1 << 4)
#define AML_MMC_MULT_CONFIG_REG 20
#define AML_MMC_MULT_CONFIG_RESP_INDEX_MASK (0xf << 12)
#define AML_MMC_MULT_CONFIG_RESP_INDEX_SHIFT 12
#define AML_MMC_MULT_CONFIG_RESP_READOUT_EN (1 << 8)
#define AML_MMC_MULT_CONFIG_STREAM_8_MODE (1 << 5)
#define AML_MMC_MULT_CONFIG_STREAM_EN (1 << 4)
#define AML_MMC_MULT_CONFIG_PORT_MASK 3
#define AML_MMC_MULT_CONFIG_PORT_A 0
#define AML_MMC_MULT_CONFIG_PORT_B 1
#define AML_MMC_MULT_CONFIG_PORT_C 2
#define AML_MMC_DMA_ADDR_REG 24
#define AML_MMC_EXTENSION_REG 28
#define AML_MMC_EXTENSION_NO_CRC16 (1 << 30)
#define AML_MMC_EXTENSION_PKT_SIZE_MASK (0x3fff << 16)
#define AML_MMC_EXTENSION_PKT_SIZE_SHIFT 16
#endif /* _ARM_AMLOGIC_AML8726_MMC_H */