freebsd-dev/sys/sparc64/pci/psycho.c
Marius Strobl 33368e9fe8 Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
  respective device drivers don't need to figure them out of OFW
  themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
  using IVARs for supplying the OFW node and the subset of standard
  properties of its children. Together with the previous change this
  also allows to fully take advantage of newbus in that drivers like
  fhc(4), which attach on multiple parent busses, no longer require
  different bus front-ends as obtaining the OFW node and properties
  as well as resource allocation works the same for all supported
  busses. As such this change also is part 4/4 of allowing creator(4)
  to work in USIII-based machines as it allows this driver to attach
  on both nexus(4) and upa(4). On the other hand removing these IVARs
  breaks API compatibility with the powerpc nexus(4) but which isn't
  that bad as a) sparc64 currently doesn't share any device driver
  hanging off of nexus(4) with powerpc and b) they were no longer
  compatible regarding OFW-related extensions at the pci(4) level
  since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
  order to handle DMA tags in a hierarchical way and get rid of the
  sparc64_root_dma_tag kludge. Together with the previous two items
  this changes also allows to completely get rid of the nexus(4)
  IVAR interface. It also includes:
  - pushing the constraints previously specified by the nexus_dmatag
    down into the DMA tags of psycho(4) and sbus(4) as it's their
    IOMMUs which induce these restrictions (and nothing at the
    nexus(4) or anything that would warrant specifying them there),
  - fixing some obviously wrong constraints of the psycho(4) and
    sbus(4) DMA tags, which happened to not actually be used with
    the sparc64_root_dma_tag kludge in place and therefore didn't
    cause problems so far,
  - replacing magic constants for constraints with macros as far
    as it is obvious as to where they come from.
  This doesn't include taking advantage of the newbus way to get
  the parent DMA tags implemented by this change in order to divorce
  the IOTSBs of the PCI and SBus IOMMUs or for implementing the
  workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
  yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
  by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
  from ofw_upa.h) and renaming its content, which actually applies to
  all of Fireplane/Safari, JBus and UPA (in the host bus case), as
  appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
  allocating the device info for the children of nexus(4). This is
  done in order to not need to export M_NEXUS when deriving drivers
  for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
  we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
  as add 'associations' and 'rsc', which are pseudo-devices without
  resources and therefore of no real interest for nexus(4), to the
  former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
  space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
  Fireplane/Safari- and JBus-based machines use multiple ranges,
  which can't be as easily divided as in the case of UPA (limiting
  the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
  for children of nexus(4) in order to give one less opportunity
  for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
  change them to take advantage of rman_get_rid() instead of caching
  the RIDs assigned to allocated resources, now that the RIDs of
  resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
  actually became outdated in several places, in panic strings and
  status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
  sbus(4) as I changed considerable amounts of these drivers as well
  as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.

Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.

PR:		76052 [1]
Approved by:	re (kensmith)
2007-03-07 21:13:51 +00:00

1333 lines
38 KiB
C

/*-
* Copyright (c) 1999, 2000 Matthew R. Green
* Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>
* Copyright (c) 2005 - 2006 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: psycho.c,v 1.39 2001/10/07 20:30:41 eeh Exp
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Support for `Hummingbird' (UltraSPARC IIe), `Psycho' and `Psycho+'
* (UltraSPARC II) and `Sabre' (UltraSPARC IIi) UPA to PCI bridges.
*/
#include "opt_ofw_pci.h"
#include "opt_psycho.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/pcpu.h>
#include <sys/reboot.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_common.h>
#include <machine/bus_private.h>
#include <machine/iommureg.h>
#include <machine/iommuvar.h>
#include <machine/ofw_bus.h>
#include <machine/resource.h>
#include <machine/ver.h>
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <sparc64/pci/ofw_pci.h>
#include <sparc64/pci/psychoreg.h>
#include <sparc64/pci/psychovar.h>
#include "pcib_if.h"
static const struct psycho_desc *psycho_find_desc(const struct psycho_desc *,
const char *);
static const struct psycho_desc *psycho_get_desc(device_t);
static void psycho_set_intr(struct psycho_softc *, int, bus_addr_t, int,
driver_filter_t);
static int psycho_find_intrmap(struct psycho_softc *, int, bus_addr_t *,
bus_addr_t *, u_long *);
static driver_filter_t psycho_intr_stub;
static bus_space_tag_t psycho_alloc_bus_tag(struct psycho_softc *, int);
/* Interrupt handlers */
static driver_filter_t psycho_ue;
static driver_filter_t psycho_ce;
static driver_filter_t psycho_pci_bus;
static driver_filter_t psycho_powerfail;
static driver_filter_t psycho_overtemp;
#ifdef PSYCHO_MAP_WAKEUP
static driver_filter_t psycho_wakeup;
#endif
/* IOMMU support */
static void psycho_iommu_init(struct psycho_softc *, int, uint32_t);
/*
* Methods
*/
static device_probe_t psycho_probe;
static device_attach_t psycho_attach;
static bus_read_ivar_t psycho_read_ivar;
static bus_setup_intr_t psycho_setup_intr;
static bus_teardown_intr_t psycho_teardown_intr;
static bus_alloc_resource_t psycho_alloc_resource;
static bus_activate_resource_t psycho_activate_resource;
static bus_deactivate_resource_t psycho_deactivate_resource;
static bus_release_resource_t psycho_release_resource;
static bus_get_dma_tag_t psycho_get_dma_tag;
static pcib_maxslots_t psycho_maxslots;
static pcib_read_config_t psycho_read_config;
static pcib_write_config_t psycho_write_config;
static pcib_route_interrupt_t psycho_route_interrupt;
static ofw_pci_intr_pending_t psycho_intr_pending;
static ofw_bus_get_node_t psycho_get_node;
static ofw_pci_adjust_busrange_t psycho_adjust_busrange;
static device_method_t psycho_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, psycho_probe),
DEVMETHOD(device_attach, psycho_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, psycho_read_ivar),
DEVMETHOD(bus_setup_intr, psycho_setup_intr),
DEVMETHOD(bus_teardown_intr, psycho_teardown_intr),
DEVMETHOD(bus_alloc_resource, psycho_alloc_resource),
DEVMETHOD(bus_activate_resource, psycho_activate_resource),
DEVMETHOD(bus_deactivate_resource, psycho_deactivate_resource),
DEVMETHOD(bus_release_resource, psycho_release_resource),
DEVMETHOD(bus_get_dma_tag, psycho_get_dma_tag),
/* pcib interface */
DEVMETHOD(pcib_maxslots, psycho_maxslots),
DEVMETHOD(pcib_read_config, psycho_read_config),
DEVMETHOD(pcib_write_config, psycho_write_config),
DEVMETHOD(pcib_route_interrupt, psycho_route_interrupt),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_node, psycho_get_node),
/* ofw_pci interface */
DEVMETHOD(ofw_pci_intr_pending, psycho_intr_pending),
DEVMETHOD(ofw_pci_adjust_busrange, psycho_adjust_busrange),
{ 0, 0 }
};
static driver_t psycho_driver = {
"pcib",
psycho_methods,
sizeof(struct psycho_softc),
};
static devclass_t psycho_devclass;
DRIVER_MODULE(psycho, nexus, psycho_driver, psycho_devclass, 0, 0);
SLIST_HEAD(, psycho_softc) psycho_softcs =
SLIST_HEAD_INITIALIZER(psycho_softcs);
struct psycho_clr {
struct psycho_softc *pci_sc;
bus_addr_t pci_clr; /* clear register */
driver_filter_t *pci_handler; /* handler to call */
void *pci_arg; /* argument for the handler */
void *pci_cookie; /* parent bus int. cookie */
device_t pci_ppb; /* farest PCI-PCI bridge */
uint8_t pci_bus; /* bus of farest PCI device */
uint8_t pci_slot; /* slot of farest PCI device */
uint8_t pci_func; /* func. of farest PCI device */
};
#define PSYCHO_READ8(sc, off) \
bus_space_read_8((sc)->sc_bustag, (sc)->sc_bushandle, (off))
#define PSYCHO_WRITE8(sc, off, v) \
bus_space_write_8((sc)->sc_bustag, (sc)->sc_bushandle, (off), (v))
#define PCICTL_READ8(sc, off) \
PSYCHO_READ8((sc), (sc)->sc_pcictl + (off))
#define PCICTL_WRITE8(sc, off, v) \
PSYCHO_WRITE8((sc), (sc)->sc_pcictl + (off), (v))
/*
* "Sabre" is the UltraSPARC IIi onboard UPA to PCI bridge. It manages a
* single PCI bus and does not have a streaming buffer. It often has an APB
* (advanced PCI bridge) connected to it, which was designed specifically for
* the IIi. The APB let's the IIi handle two independednt PCI buses, and
* appears as two "Simba"'s underneath the Sabre.
*
* "Hummingbird" is the UltraSPARC IIe onboard UPA to PCI bridge. It's
* basically the same as Sabre but without an APB underneath it.
*
* "Psycho" and "Psycho+" are dual UPA to PCI bridges. They sit on the UPA bus
* and manage two PCI buses. "Psycho" has two 64-bit 33MHz buses, while
* "Psycho+" controls both a 64-bit 33Mhz and a 64-bit 66Mhz PCI bus. You
* will usually find a "Psycho+" since I don't think the original "Psycho"
* ever shipped, and if it did it would be in the U30.
*
* Each "Psycho" PCI bus appears as a separate OFW node, but since they are
* both part of the same IC, they only have a single register space. As such,
* they need to be configured together, even though the autoconfiguration will
* attach them separately.
*
* On UltraIIi machines, "Sabre" itself usually takes pci0, with "Simba" often
* as pci1 and pci2, although they have been implemented with other PCI bus
* numbers on some machines.
*
* On UltraII machines, there can be any number of "Psycho+" ICs, each
* providing two PCI buses.
*/
#define FAST 0x66600000
#ifdef DEBUGGER_ON_POWERFAIL
#define PSYCHO_PWRFAIL_INT_FLAGS FAST
#else
#define PSYCHO_PWRFAIL_INT_FLAGS 0
#endif
#define OFW_PCI_TYPE "pci"
struct psycho_desc {
const char *pd_string;
int pd_mode;
const char *pd_name;
};
static const struct psycho_desc psycho_compats[] = {
{ "pci108e,8000", PSYCHO_MODE_PSYCHO, "Psycho compatible" },
{ "pci108e,a000", PSYCHO_MODE_SABRE, "Sabre compatible" },
{ "pci108e,a001", PSYCHO_MODE_SABRE, "Hummingbird compatible" },
{ NULL, 0, NULL }
};
static const struct psycho_desc psycho_models[] = {
{ "SUNW,psycho", PSYCHO_MODE_PSYCHO, "Psycho" },
{ "SUNW,sabre", PSYCHO_MODE_SABRE, "Sabre" },
{ NULL, 0, NULL }
};
static const struct psycho_desc *
psycho_find_desc(const struct psycho_desc *table, const char *string)
{
const struct psycho_desc *desc;
if (string == NULL)
return (NULL);
for (desc = table; desc->pd_string != NULL; desc++)
if (strcmp(desc->pd_string, string) == 0)
return (desc);
return (NULL);
}
static const struct psycho_desc *
psycho_get_desc(device_t dev)
{
const struct psycho_desc *rv;
rv = psycho_find_desc(psycho_models, ofw_bus_get_model(dev));
if (rv == NULL)
rv = psycho_find_desc(psycho_compats, ofw_bus_get_compat(dev));
return (rv);
}
static int
psycho_probe(device_t dev)
{
const char *dtype;
dtype = ofw_bus_get_type(dev);
if (dtype != NULL && strcmp(dtype, OFW_PCI_TYPE) == 0 &&
psycho_get_desc(dev) != NULL) {
device_set_desc(dev, "U2P UPA-PCI bridge");
return (0);
}
return (ENXIO);
}
static int
psycho_attach(device_t dev)
{
char name[sizeof("pci108e,1000")];
struct psycho_softc *asc, *sc, *osc;
struct ofw_pci_ranges *range;
const struct psycho_desc *desc;
phandle_t child, node;
uint64_t csr, dr;
uint32_t dvmabase, psycho_br[2];
int32_t rev;
u_int ver;
int i, n, nrange, rid;
#ifdef PSYCHO_DEBUG
bus_addr_t map, clr;
uint64_t mr;
#endif
node = ofw_bus_get_node(dev);
sc = device_get_softc(dev);
desc = psycho_get_desc(dev);
sc->sc_node = node;
sc->sc_dev = dev;
sc->sc_mode = desc->pd_mode;
/*
* The Psycho gets three register banks:
* (0) per-PBM configuration and status registers
* (1) per-PBM PCI configuration space, containing only the
* PBM 256-byte PCI header
* (2) the shared Psycho configuration registers
*/
if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
rid = 2;
sc->sc_pcictl =
bus_get_resource_start(dev, SYS_RES_MEMORY, 0) -
bus_get_resource_start(dev, SYS_RES_MEMORY, 2);
switch (sc->sc_pcictl) {
case PSR_PCICTL0:
sc->sc_half = 0;
break;
case PSR_PCICTL1:
sc->sc_half = 1;
break;
default:
panic("%s: bogus PCI control register location",
__func__);
}
} else {
rid = 0;
sc->sc_pcictl = PSR_PCICTL0;
sc->sc_half = 0;
}
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
(sc->sc_mode == PSYCHO_MODE_PSYCHO ? RF_SHAREABLE : 0) |
RF_ACTIVE);
if (sc->sc_mem_res == NULL)
panic("%s: could not allocate registers", __func__);
sc->sc_bustag = rman_get_bustag(sc->sc_mem_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_mem_res);
/*
* Match other Psycho's that are already configured against
* the base physical address. This will be the same for a
* pair of devices that share register space.
*/
osc = NULL;
SLIST_FOREACH(asc, &psycho_softcs, sc_link) {
if (rman_get_start(asc->sc_mem_res) ==
rman_get_start(sc->sc_mem_res)) {
/* Found partner. */
osc = asc;
break;
}
}
/* Clear PCI AFSR. */
PCICTL_WRITE8(sc, PCR_AFS, PCIAFSR_ERRMASK);
csr = PSYCHO_READ8(sc, PSR_CS);
ver = PSYCHO_GCSR_VERS(csr);
sc->sc_ign = 0x7c0; /* Hummingbird/Sabre IGN is always 0x1f. */
if (sc->sc_mode == PSYCHO_MODE_PSYCHO)
sc->sc_ign = PSYCHO_GCSR_IGN(csr) << INTMAP_IGN_SHIFT;
device_printf(dev, "%s, impl %d, version %d, ign %#x, bus %c\n",
desc->pd_name, (u_int)PSYCHO_GCSR_IMPL(csr), ver, sc->sc_ign,
'A' + sc->sc_half);
/* Set up the PCI control and PCI diagnostic registers. */
/*
* Revision 0 EBus bridges have a bug which prevents them from
* working when bus parking is enabled.
*/
rev = -1;
csr = PCICTL_READ8(sc, PCR_CS);
csr &= ~PCICTL_ARB_PARK;
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if (OF_getprop(child, "name", name, sizeof(name)) == -1)
continue;
if ((strcmp(name, "ebus") == 0 ||
strcmp(name, "pci108e,1000") == 0) &&
OF_getprop(child, "revision-id", &rev, sizeof(rev)) > 0 &&
rev == 0)
break;
}
if (rev != 0 && OF_getproplen(node, "no-bus-parking") < 0)
csr |= PCICTL_ARB_PARK;
/* Workarounds for version specific bugs. */
dr = PCICTL_READ8(sc, PCR_DIAG);
switch (ver) {
case 0:
dr |= DIAG_RTRY_DIS;
dr &= ~DIAG_DWSYNC_DIS;
/* XXX need to also disable rerun of the streaming buffers. */
break;
case 1:
csr &= ~PCICTL_ARB_PARK;
dr |= DIAG_RTRY_DIS | DIAG_DWSYNC_DIS;
/* XXX need to also disable rerun of the streaming buffers. */
break;
default:
dr |= DIAG_DWSYNC_DIS;
dr &= ~DIAG_RTRY_DIS;
break;
}
csr |= PCICTL_SERR | PCICTL_ERRINTEN | PCICTL_ARB_4;
csr &= ~(PCICTL_SBHINTEN | PCICTL_WAKEUPEN);
#ifdef PSYCHO_DEBUG
device_printf(dev, "PCI CSR 0x%016llx -> 0x%016llx\n",
(unsigned long long)PCICTL_READ8(sc, PCR_CS),
(unsigned long long)csr);
#endif
PCICTL_WRITE8(sc, PCR_CS, csr);
dr &= ~DIAG_ISYNC_DIS;
#ifdef PSYCHO_DEBUG
device_printf(dev, "PCI DR 0x%016llx -> 0x%016llx\n",
(unsigned long long)PCICTL_READ8(sc, PCR_DIAG),
(unsigned long long)dr);
#endif
PCICTL_WRITE8(sc, PCR_DIAG, dr);
if (sc->sc_mode == PSYCHO_MODE_SABRE) {
/* Use the PROM preset for now. */
csr = PCICTL_READ8(sc, PCR_TAS);
if (csr == 0)
panic("%s: Hummingbird/Sabre TAS not initialized.",
__func__);
dvmabase = (ffs(csr) - 1) << PCITAS_ADDR_SHIFT;
} else
dvmabase = -1;
/* Initialize memory and I/O rmans. */
sc->sc_pci_io_rman.rm_type = RMAN_ARRAY;
sc->sc_pci_io_rman.rm_descr = "Psycho PCI I/O Ports";
if (rman_init(&sc->sc_pci_io_rman) != 0 ||
rman_manage_region(&sc->sc_pci_io_rman, 0, PSYCHO_IO_SIZE) != 0)
panic("%s: failed to set up I/O rman", __func__);
sc->sc_pci_mem_rman.rm_type = RMAN_ARRAY;
sc->sc_pci_mem_rman.rm_descr = "Psycho PCI Memory";
if (rman_init(&sc->sc_pci_mem_rman) != 0 ||
rman_manage_region(&sc->sc_pci_mem_rman, 0, PSYCHO_MEM_SIZE) != 0)
panic("%s: failed to set up memory rman", __func__);
nrange = OF_getprop_alloc(node, "ranges", sizeof(*range),
(void **)&range);
/*
* Make sure that the expected ranges are present. The OFW_PCI_CS_MEM64
* one is not currently used though.
*/
if (nrange != PSYCHO_NRANGE)
panic("%s: unsupported number of ranges", __func__);
/*
* Find the addresses of the various bus spaces.
* There should not be multiple ones of one kind.
* The physical start addresses of the ranges are the configuration,
* memory and I/O handles.
*/
for (n = 0; n < PSYCHO_NRANGE; n++) {
i = OFW_PCI_RANGE_CS(&range[n]);
if (sc->sc_pci_bh[i] != 0)
panic("%s: duplicate range for space %d", __func__, i);
sc->sc_pci_bh[i] = OFW_PCI_RANGE_PHYS(&range[n]);
}
free(range, M_OFWPROP);
/* Register the softc, this is needed for paired Psychos. */
SLIST_INSERT_HEAD(&psycho_softcs, sc, sc_link);
/*
* Register a PCI bus error interrupt handler according to which
* half this is. Hummingbird/Sabre don't have a PCI bus B error
* interrupt but they are also only used for PCI bus A.
*/
psycho_set_intr(sc, 0, sc->sc_half == 0 ? PSR_PCIAERR_INT_MAP :
PSR_PCIBERR_INT_MAP, FAST, psycho_pci_bus);
/*
* If we're a Hummingbird/Sabre or the first of a pair of Psycho's to
* arrive here, start up the IOMMU.
*/
if (osc == NULL) {
/*
* Establish handlers for interesting interrupts...
*
* XXX We need to remember these and remove this to support
* hotplug on the UPA/FHC bus.
*
* XXX Not all controllers have these, but installing them
* is better than trying to sort through this mess.
*/
psycho_set_intr(sc, 1, PSR_UE_INT_MAP, FAST, psycho_ue);
psycho_set_intr(sc, 2, PSR_CE_INT_MAP, 0, psycho_ce);
psycho_set_intr(sc, 3, PSR_POWER_INT_MAP,
PSYCHO_PWRFAIL_INT_FLAGS, psycho_powerfail);
/* Psycho-specific initialization */
if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
/*
* Hummingbirds/Sabres do not have the following two
* interrupts.
*/
/*
* The spare hardware interrupt is used for the
* over-temperature interrupt.
*/
psycho_set_intr(sc, 4, PSR_SPARE_INT_MAP, FAST,
psycho_overtemp);
#ifdef PSYCHO_MAP_WAKEUP
/*
* psycho_wakeup() doesn't do anything useful right
* now.
*/
psycho_set_intr(sc, 5, PSR_PWRMGT_INT_MAP, 0,
psycho_wakeup);
#endif /* PSYCHO_MAP_WAKEUP */
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle,
PSR_TC0);
}
/*
* Set up IOMMU and PCI configuration if we're the first
* of a pair of Psycho's to arrive here.
*
* We should calculate a TSB size based on amount of RAM
* and number of bus controllers and number and type of
* child devices.
*
* For the moment, 32KB should be more than enough.
*/
sc->sc_is = malloc(sizeof(struct iommu_state), M_DEVBUF,
M_NOWAIT);
if (sc->sc_is == NULL)
panic("%s: malloc iommu_state failed", __func__);
sc->sc_is->is_sb[0] = 0;
sc->sc_is->is_sb[1] = 0;
if (OF_getproplen(node, "no-streaming-cache") < 0)
sc->sc_is->is_sb[0] = sc->sc_pcictl + PCR_STRBUF;
psycho_iommu_init(sc, 3, dvmabase);
} else {
/* Just copy IOMMU state, config tag and address. */
sc->sc_is = osc->sc_is;
if (OF_getproplen(node, "no-streaming-cache") < 0)
sc->sc_is->is_sb[1] = sc->sc_pcictl + PCR_STRBUF;
iommu_reset(sc->sc_is);
}
/* Allocate our tags. */
sc->sc_pci_memt = psycho_alloc_bus_tag(sc, PCI_MEMORY_BUS_SPACE);
sc->sc_pci_iot = psycho_alloc_bus_tag(sc, PCI_IO_BUS_SPACE);
sc->sc_pci_cfgt = psycho_alloc_bus_tag(sc, PCI_CONFIG_BUS_SPACE);
if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, IOMMU_MAXADDR, ~0,
NULL, NULL, IOMMU_MAXADDR, 0xff, 0xffffffff, 0, NULL, NULL,
&sc->sc_pci_dmat) != 0)
panic("%s: bus_dma_tag_create failed", __func__);
/* Customize the tag. */
sc->sc_pci_dmat->dt_cookie = sc->sc_is;
sc->sc_pci_dmat->dt_mt = &iommu_dma_methods;
#ifdef PSYCHO_DEBUG
/*
* Enable all interrupts and clear all interrupt states.
* This aids the debugging of interrupt routing problems.
*/
for (map = PSR_PCIA0_INT_MAP, clr = PSR_PCIA0_INT_CLR, n = 0;
map <= PSR_PCIB3_INT_MAP; map += 8, clr += 32, n++) {
mr = PSYCHO_READ8(sc, map);
device_printf(dev, "intr map (pci) %d: %#lx\n", n, (u_long)mr);
PSYCHO_WRITE8(sc, map, mr & ~INTMAP_V);
for (i = 0; i < 4; i++)
PCICTL_WRITE8(sc, clr + i * 8, 0);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
for (map = PSR_SCSI_INT_MAP, clr = PSR_SCSI_INT_CLR, n = 0;
map <= PSR_SERIAL_INT_MAP; map += 8, clr += 8, n++) {
mr = PSYCHO_READ8(sc, map);
device_printf(dev, "intr map (obio) %d: %#lx, clr: %#lx\n", n,
(u_long)mr, (u_long)clr);
PSYCHO_WRITE8(sc, map, mr & ~INTMAP_V);
PSYCHO_WRITE8(sc, clr, 0);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
#endif /* PSYCHO_DEBUG */
/*
* Get the bus range from the firmware; it is used solely for obtaining
* the inital bus number, and cannot be trusted on all machines.
*/
n = OF_getprop(node, "bus-range", (void *)psycho_br, sizeof(psycho_br));
if (n == -1)
panic("%s: could not get bus-range", __func__);
if (n != sizeof(psycho_br))
panic("%s: broken bus-range (%d)", __func__, n);
/* Clear PCI status error bits. */
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC,
PCIR_STATUS, PCIM_STATUS_PERR | PCIM_STATUS_RMABORT |
PCIM_STATUS_RTABORT | PCIM_STATUS_STABORT |
PCIM_STATUS_PERRREPORT, 2);
/*
* Set the latency timer register as this isn't always done by the
* firmware.
*/
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC,
PCIR_LATTIMER, 64, 1);
sc->sc_pci_secbus = sc->sc_pci_subbus = ofw_pci_alloc_busno(node);
/*
* Program the bus range registers.
* NOTE: for the Psycho, the second write changes the bus number the
* Psycho itself uses for it's configuration space, so these
* writes must be kept in this order!
* The Hummingbird/Sabre always uses bus 0, but there only can be one
* Hummingbird/Sabre per machine.
*/
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC, PCSR_SUBBUS,
sc->sc_pci_subbus, 1);
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC, PCSR_SECBUS,
sc->sc_pci_secbus, 1);
ofw_bus_setup_iinfo(node, &sc->sc_pci_iinfo, sizeof(ofw_pci_intr_t));
/*
* On E250 the interrupt map entry for the EBus bridge is wrong,
* causing incorrect interrupts to be assigned to some devices on
* the EBus. Work around it by changing our copy of the interrupt
* map mask to perform a full comparison of the INO. That way
* the interrupt map entry for the EBus bridge won't match at all
* and the INOs specified in the "interrupts" properties of the
* EBus devices will be used directly instead.
*/
if (strcmp(sparc64_model, "SUNW,Ultra-250") == 0 &&
sc->sc_pci_iinfo.opi_imapmsk != NULL)
*(ofw_pci_intr_t *)(&sc->sc_pci_iinfo.opi_imapmsk[
sc->sc_pci_iinfo.opi_addrc]) = INTMAP_INO_MASK;
device_add_child(dev, "pci", sc->sc_pci_secbus);
return (bus_generic_attach(dev));
}
static void
psycho_set_intr(struct psycho_softc *sc, int index, bus_addr_t map, int iflags,
driver_filter_t handler)
{
uint64_t mr;
int res, rid;
res = EINVAL;
rid = index;
mr = PSYCHO_READ8(sc, map);
sc->sc_irq_res[index] = bus_alloc_resource_any(sc->sc_dev, SYS_RES_IRQ,
&rid, RF_ACTIVE);
if (sc->sc_irq_res[index] != NULL &&
rman_get_start(sc->sc_irq_res[index]) == INTVEC(mr)) {
if (iflags & FAST) {
iflags &= ~FAST;
res = bus_setup_intr(sc->sc_dev, sc->sc_irq_res[index],
INTR_TYPE_MISC | iflags, handler, NULL, sc,
&sc->sc_ihand[index]);
} else
res = bus_setup_intr(sc->sc_dev, sc->sc_irq_res[index],
INTR_TYPE_MISC | iflags, NULL,
(driver_intr_t *)handler, sc,
&sc->sc_ihand[index]);
}
if (res)
panic("%s: failed to set up interrupt", __func__);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
static int
psycho_find_intrmap(struct psycho_softc *sc, int ino, bus_addr_t *intrmapptr,
bus_addr_t *intrclrptr, bus_addr_t *intrdiagptr)
{
bus_addr_t intrmap, intrclr;
uint64_t im;
u_long diag;
int found;
found = 0;
/* Hunt thru OBIO first. */
diag = PSYCHO_READ8(sc, PSR_OBIO_INT_DIAG);
for (intrmap = PSR_SCSI_INT_MAP, intrclr = PSR_SCSI_INT_CLR;
intrmap <= PSR_SERIAL_INT_MAP; intrmap += 8, intrclr += 8,
diag >>= 2) {
im = PSYCHO_READ8(sc, intrmap);
if (INTINO(im) == ino) {
diag &= 2;
found = 1;
break;
}
}
if (!found) {
diag = PSYCHO_READ8(sc, PSR_PCI_INT_DIAG);
/* Now do PCI interrupts. */
for (intrmap = PSR_PCIA0_INT_MAP, intrclr = PSR_PCIA0_INT_CLR;
intrmap <= PSR_PCIB3_INT_MAP; intrmap += 8, intrclr += 32,
diag >>= 8) {
if (sc->sc_mode == PSYCHO_MODE_PSYCHO &&
(intrmap == PSR_PCIA2_INT_MAP ||
intrmap == PSR_PCIA3_INT_MAP))
continue;
im = PSYCHO_READ8(sc, intrmap);
if (((im ^ ino) & 0x3c) == 0) {
intrclr += 8 * (ino & 3);
diag = (diag >> ((ino & 3) * 2)) & 2;
found = 1;
break;
}
}
}
if (intrmapptr != NULL)
*intrmapptr = intrmap;
if (intrclrptr != NULL)
*intrclrptr = intrclr;
if (intrdiagptr != NULL)
*intrdiagptr = diag;
return (found);
}
/*
* Interrupt handlers
*/
static int
psycho_ue(void *arg)
{
struct psycho_softc *sc = arg;
uint64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_UE_AFA);
afsr = PSYCHO_READ8(sc, PSR_UE_AFS);
/*
* On the UltraSPARC-IIi/IIe, IOMMU misses/protection faults cause
* the AFAR to be set to the physical address of the TTE entry that
* was invalid/write protected. Call into the iommu code to have
* them decoded to virtual I/O addresses.
*/
if ((afsr & UEAFSR_P_DTE) != 0)
iommu_decode_fault(sc->sc_is, afar);
panic("%s: uncorrectable DMA error AFAR %#lx AFSR %#lx",
device_get_name(sc->sc_dev), (u_long)afar, (u_long)afsr);
return (FILTER_HANDLED);
}
static int
psycho_ce(void *arg)
{
struct psycho_softc *sc = arg;
uint64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_CE_AFA);
afsr = PSYCHO_READ8(sc, PSR_CE_AFS);
device_printf(sc->sc_dev, "correctable DMA error AFAR %#lx "
"AFSR %#lx\n", (u_long)afar, (u_long)afsr);
/* Clear the error bits that we caught. */
PSYCHO_WRITE8(sc, PSR_CE_AFS, afsr & CEAFSR_ERRMASK);
PSYCHO_WRITE8(sc, PSR_CE_INT_CLR, 0);
return (FILTER_HANDLED);
}
static int
psycho_pci_bus(void *arg)
{
struct psycho_softc *sc = arg;
uint64_t afar, afsr;
afar = PCICTL_READ8(sc, PCR_AFA);
afsr = PCICTL_READ8(sc, PCR_AFS);
panic("%s: PCI bus %c error AFAR %#lx AFSR %#lx",
device_get_name(sc->sc_dev), 'A' + sc->sc_half, (u_long)afar,
(u_long)afsr);
return (FILTER_HANDLED);
}
static int
psycho_powerfail(void *arg)
{
#ifdef DEBUGGER_ON_POWERFAIL
struct psycho_softc *sc = arg;
kdb_enter("powerfail");
PSYCHO_WRITE8(sc, PSR_POWER_INT_CLR, 0);
#else
printf("Power Failure Detected: Shutting down NOW.\n");
shutdown_nice(0);
#endif
return (FILTER_HANDLED);
}
static int
psycho_overtemp(void *arg)
{
printf("DANGER: OVER TEMPERATURE detected.\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
return (FILTER_HANDLED);
}
#ifdef PSYCHO_MAP_WAKEUP
static int
psycho_wakeup(void *arg)
{
struct psycho_softc *sc = arg;
PSYCHO_WRITE8(sc, PSR_PWRMGT_INT_CLR, 0);
/* Gee, we don't really have a framework to deal with this properly. */
device_printf(sc->sc_dev, "power management wakeup\n");
return (FILTER_HANDLED);
}
#endif /* PSYCHO_MAP_WAKEUP */
static void
psycho_iommu_init(struct psycho_softc *sc, int tsbsize, uint32_t dvmabase)
{
char *name;
struct iommu_state *is = sc->sc_is;
/* Punch in our copies. */
is->is_bustag = sc->sc_bustag;
is->is_bushandle = sc->sc_bushandle;
is->is_iommu = PSR_IOMMU;
is->is_dtag = PSR_IOMMU_TLB_TAG_DIAG;
is->is_ddram = PSR_IOMMU_TLB_DATA_DIAG;
is->is_dqueue = PSR_IOMMU_QUEUE_DIAG;
is->is_dva = PSR_IOMMU_SVADIAG;
is->is_dtcmp = PSR_IOMMU_TLB_CMP_DIAG;
/* Give us a nice name... */
name = malloc(32, M_DEVBUF, M_NOWAIT);
if (name == NULL)
panic("%s: could not malloc iommu name", __func__);
snprintf(name, 32, "%s dvma", device_get_nameunit(sc->sc_dev));
iommu_init(name, is, tsbsize, dvmabase, 0);
}
static int
psycho_maxslots(device_t dev)
{
/* XXX: is this correct? */
return (PCI_SLOTMAX);
}
static uint32_t
psycho_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
int width)
{
struct psycho_softc *sc;
bus_space_handle_t bh;
u_long offset = 0;
uint8_t byte;
uint16_t shrt;
uint32_t wrd;
uint32_t r;
int i;
sc = device_get_softc(dev);
offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
switch (width) {
case 1:
i = bus_space_peek_1(sc->sc_pci_cfgt, bh, offset, &byte);
r = byte;
break;
case 2:
i = bus_space_peek_2(sc->sc_pci_cfgt, bh, offset, &shrt);
r = shrt;
break;
case 4:
i = bus_space_peek_4(sc->sc_pci_cfgt, bh, offset, &wrd);
r = wrd;
break;
default:
panic("%s: bad width", __func__);
}
if (i) {
#ifdef PSYCHO_DEBUG
printf("%s: read data error reading: %d.%d.%d: 0x%x\n",
__func__, bus, slot, func, reg);
#endif
r = -1;
}
return (r);
}
static void
psycho_write_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
uint32_t val, int width)
{
struct psycho_softc *sc;
bus_space_handle_t bh;
u_long offset = 0;
sc = device_get_softc(dev);
offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
switch (width) {
case 1:
bus_space_write_1(sc->sc_pci_cfgt, bh, offset, val);
break;
case 2:
bus_space_write_2(sc->sc_pci_cfgt, bh, offset, val);
break;
case 4:
bus_space_write_4(sc->sc_pci_cfgt, bh, offset, val);
break;
default:
panic("%s: bad width", __func__);
}
}
static int
psycho_route_interrupt(device_t bridge, device_t dev, int pin)
{
struct psycho_softc *sc;
struct ofw_pci_register reg;
bus_addr_t intrmap;
ofw_pci_intr_t pintr, mintr;
uint8_t maskbuf[sizeof(reg) + sizeof(pintr)];
sc = device_get_softc(bridge);
pintr = pin;
if (ofw_bus_lookup_imap(ofw_bus_get_node(dev), &sc->sc_pci_iinfo, &reg,
sizeof(reg), &pintr, sizeof(pintr), &mintr, sizeof(mintr), maskbuf))
return (mintr);
/*
* If this is outside of the range for an intpin, it's likely a full
* INO, and no mapping is required at all; this happens on the U30,
* where there's no interrupt map at the Psycho node. Fortunately,
* there seem to be no INOs in the intpin range on this boxen, so
* this easy heuristics will do.
*/
if (pin > 4)
return (pin);
/*
* Guess the INO; we always assume that this is a non-OBIO
* device, and that pin is a "real" intpin number. Determine
* the mapping register to be used by the slot number.
* We only need to do this on E450s, it seems; here, the slot numbers
* for bus A are one-based, while those for bus B seemingly have an
* offset of 2 (hence the factor of 3 below).
*/
intrmap = PSR_PCIA0_INT_MAP +
8 * (pci_get_slot(dev) - 1 + 3 * sc->sc_half);
mintr = INTINO(PSYCHO_READ8(sc, intrmap)) + pin - 1;
device_printf(bridge, "guessing interrupt %d for device %d.%d pin %d\n",
(int)mintr, pci_get_slot(dev), pci_get_function(dev), pin);
return (mintr);
}
static int
psycho_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct psycho_softc *sc;
sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
*result = sc->sc_pci_secbus;
return (0);
}
return (ENOENT);
}
/* Write to the correct clr register, and call the actual handler. */
static int
psycho_intr_stub(void *arg)
{
struct psycho_clr *pc = arg;
if (pc->pci_ppb != NULL) {
(void)PCIB_READ_CONFIG(pc->pci_ppb, pc->pci_bus, pc->pci_slot,
pc->pci_func, PCIR_VENDOR, 2);
(void)PSYCHO_READ8(pc->pci_sc, PSR_DMA_WRITE_SYNC);
}
pc->pci_handler(pc->pci_arg);
PSYCHO_WRITE8(pc->pci_sc, pc->pci_clr, 0);
return (FILTER_HANDLED);
}
static int
psycho_setup_intr(device_t dev, device_t child, struct resource *ires,
int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg,
void **cookiep)
{
struct {
int apb:1;
int ppb:1;
} found;
devclass_t pci_devclass;
device_t cdev, pdev, pcidev;
struct psycho_softc *sc;
struct psycho_clr *pc;
bus_addr_t intrmapptr, intrclrptr;
long vec;
uint64_t mr;
int error, ino;
if (filt != NULL && intr != NULL)
return (EINVAL);
sc = device_get_softc(dev);
pc = malloc(sizeof(*pc), M_DEVBUF, M_NOWAIT | M_ZERO);
if (pc == NULL)
return (ENOMEM);
/*
* Hunt through all the interrupt mapping regs to look for our
* interrupt vector.
*
* XXX We only compare INOs rather than IGNs since the firmware may
* not provide the IGN and the IGN is constant for all devices on that
* PCI controller. This could cause problems for the FFB/external
* interrupt which has a full vector that can be set arbitrarily.
*/
vec = rman_get_start(ires);
ino = INTINO(vec);
if (!psycho_find_intrmap(sc, ino, &intrmapptr, &intrclrptr, NULL)) {
device_printf(dev, "cannot find interrupt vector 0x%lx\n", vec);
free(pc, M_DEVBUF);
return (EINVAL);
}
#ifdef PSYCHO_DEBUG
device_printf(dev, "%s: INO %d, map %#lx, clr %#lx\n", __func__, ino,
(u_long)intrmapptr, (u_long)intrclrptr);
#endif
pc->pci_sc = sc;
pc->pci_arg = arg;
pc->pci_handler = (filt != NULL) ? filt : (driver_filter_t *)intr;
pc->pci_clr = intrclrptr;
/*
* The Sabre-APB-combination has a bug where it does not drain
* DMA write data for devices behind additional PCI-PCI bridges
* underneath the APB PCI-PCI bridge. The workaround is to do
* a read on the farest PCI-PCI bridge followed by a read of the
* PCI DMA write sync register of the Sabre.
* XXX installing the workaround for an affected device and the
* actual workaround in psycho_intr_stub() should be moved to
* psycho(4)-specific bus_dma_tag_create() and bus_dmamap_sync()
* methods, respectively, once we make use of BUS_GET_DMA_TAG(),
* so the workaround isn't only applied for interrupt handlers
* but also for polling(4) callbacks.
*/
if (sc->sc_mode == PSYCHO_MODE_SABRE) {
pcidev = NULL;
found.apb = found.ppb = 0;
pci_devclass = devclass_find("pci");
for (cdev = child; cdev != dev; cdev = pdev) {
pdev = device_get_parent(cdev);
if (pcidev == NULL) {
if (device_get_devclass(pdev) != pci_devclass)
continue;
pcidev = cdev;
continue;
}
/*
* NB: APB would also match as PCI-PCI bridges.
*/
if (pci_get_vendor(cdev) == 0x108e &&
pci_get_device(cdev) == 0x5000) {
found.apb = 1;
break;
}
if (pci_get_class(cdev) == PCIC_BRIDGE &&
pci_get_subclass(cdev) == PCIS_BRIDGE_PCI)
found.ppb = 1;
}
if (found.apb && found.ppb && pcidev != NULL) {
pc->pci_ppb =
device_get_parent(device_get_parent(pcidev));
pc->pci_bus = pci_get_bus(pcidev);
pc->pci_slot = pci_get_slot(pcidev);
pc->pci_func = pci_get_function(pcidev);
if (bootverbose)
device_printf(dev, "installed DMA sync "
"workaround for device %d.%d on bus %d\n",
pc->pci_slot, pc->pci_func, pc->pci_bus);
}
}
/* Disable the interrupt while we fiddle with it. */
mr = PSYCHO_READ8(sc, intrmapptr);
PSYCHO_WRITE8(sc, intrmapptr, mr & ~INTMAP_V);
if (filt != NULL)
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
psycho_intr_stub, NULL, pc, cookiep);
else
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
NULL, (driver_intr_t *)psycho_intr_stub, pc, cookiep);
if (error != 0) {
free(pc, M_DEVBUF);
return (error);
}
pc->pci_cookie = *cookiep;
*cookiep = pc;
/*
* Clear the interrupt, it might have been triggered before it was
* set up.
*/
PSYCHO_WRITE8(sc, intrclrptr, 0);
/*
* Enable the interrupt and program the target module now we have the
* handler installed.
*/
PSYCHO_WRITE8(sc, intrmapptr, INTMAP_ENABLE(mr, PCPU_GET(mid)));
return (error);
}
static int
psycho_teardown_intr(device_t dev, device_t child, struct resource *vec,
void *cookie)
{
struct psycho_clr *pc = cookie;
int error;
error = BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec,
pc->pci_cookie);
/*
* Don't disable the interrupt for now, so that stray interupts get
* detected...
*/
if (error != 0)
free(pc, M_DEVBUF);
return (error);
}
static struct resource *
psycho_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct psycho_softc *sc;
struct resource *rv;
struct rman *rm;
bus_space_tag_t bt;
bus_space_handle_t bh;
int needactivate = flags & RF_ACTIVE;
flags &= ~RF_ACTIVE;
sc = device_get_softc(bus);
if (type == SYS_RES_IRQ) {
/*
* XXX: Don't accept blank ranges for now, only single
* interrupts. The other case should not happen with the
* MI PCI code...
* XXX: This may return a resource that is out of the
* range that was specified. Is this correct...?
*/
if (start != end)
panic("%s: XXX: interrupt range", __func__);
start = end |= sc->sc_ign;
return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type,
rid, start, end, count, flags));
}
switch (type) {
case SYS_RES_MEMORY:
rm = &sc->sc_pci_mem_rman;
bt = sc->sc_pci_memt;
bh = sc->sc_pci_bh[OFW_PCI_CS_MEM32];
break;
case SYS_RES_IOPORT:
rm = &sc->sc_pci_io_rman;
bt = sc->sc_pci_iot;
bh = sc->sc_pci_bh[OFW_PCI_CS_IO];
break;
default:
return (NULL);
}
rv = rman_reserve_resource(rm, start, end, count, flags, child);
if (rv == NULL)
return (NULL);
rman_set_rid(rv, *rid);
bh += rman_get_start(rv);
rman_set_bustag(rv, bt);
rman_set_bushandle(rv, bh);
if (needactivate) {
if (bus_activate_resource(child, type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
}
return (rv);
}
static int
psycho_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
void *p;
int error;
if (type == SYS_RES_IRQ)
return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus), child,
type, rid, r));
if (type == SYS_RES_MEMORY) {
/*
* Need to memory-map the device space, as some drivers depend
* on the virtual address being set and useable.
*/
error = sparc64_bus_mem_map(rman_get_bustag(r),
rman_get_bushandle(r), rman_get_size(r), 0, 0, &p);
if (error != 0)
return (error);
rman_set_virtual(r, p);
}
return (rman_activate_resource(r));
}
static int
psycho_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ)
return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus), child,
type, rid, r));
if (type == SYS_RES_MEMORY) {
sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
rman_set_virtual(r, NULL);
}
return (rman_deactivate_resource(r));
}
static int
psycho_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
int error;
if (type == SYS_RES_IRQ)
return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, r));
if (rman_get_flags(r) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type, rid, r);
if (error)
return error;
}
return (rman_release_resource(r));
}
static bus_dma_tag_t
psycho_get_dma_tag(device_t bus, device_t child)
{
struct psycho_softc *sc;
sc = device_get_softc(bus);
return (sc->sc_pci_dmat);
}
static int
psycho_intr_pending(device_t dev, ofw_pci_intr_t intr)
{
struct psycho_softc *sc;
u_long diag;
sc = device_get_softc(dev);
if (!psycho_find_intrmap(sc, intr, NULL, NULL, &diag)) {
device_printf(dev, "%s: mapping not found for %d\n", __func__,
intr);
return (0);
}
return (diag != 0);
}
static phandle_t
psycho_get_node(device_t bus, device_t dev)
{
struct psycho_softc *sc;
sc = device_get_softc(bus);
/* We only have one child, the PCI bus, which needs our own node. */
return (sc->sc_node);
}
static void
psycho_adjust_busrange(device_t dev, u_int subbus)
{
struct psycho_softc *sc;
sc = device_get_softc(dev);
/* If necessary, adjust the subordinate bus number register. */
if (subbus > sc->sc_pci_subbus) {
#ifdef PSYCHO_DEBUG
device_printf(dev,
"adjusting secondary bus number from %d to %d\n",
sc->sc_pci_subbus, subbus);
#endif
sc->sc_pci_subbus = subbus;
PCIB_WRITE_CONFIG(dev, sc->sc_pci_secbus, PCS_DEVICE, PCS_FUNC,
PCSR_SUBBUS, subbus, 1);
}
}
static bus_space_tag_t
psycho_alloc_bus_tag(struct psycho_softc *sc, int type)
{
bus_space_tag_t bt;
bt = malloc(sizeof(struct bus_space_tag), M_DEVBUF, M_NOWAIT | M_ZERO);
if (bt == NULL)
panic("%s: out of memory", __func__);
bt->bst_cookie = sc;
bt->bst_parent = sc->sc_bustag;
bt->bst_type = type;
return (bt);
}