4f3d818c12
(1) Bug fix (pass boot drive):
pc98/boot/biosboot/boot2.S
(2) Delete code for unsupported high-resolution modes and move old
Epson notebook code to epsonio.h:
pc98/boot/biosboot/io.c
pc98/i386/vm_machdep.c
pc98/pc98/fd.c
pc98/pc98/pc98.c
pc98/pc98/pc98.h
pc98/pc98/epsonio.h (new)
(3) Change aic driver so that PCMCIA cards (I/O port same as PC/AT)
and PC-9801-100 cards can be selected with a flag in kernel config
file:
pc98/pc98/aic6360.c
pc98/pc98/aic_98.h (new)
(4) Fix wcd entry (it was broken). Delete mcd, it doesn't work on
98. Change aic entry according to above:
pc98/conf/GENERIC98
(5) Move pc98_machdep.c to top of files in pc98/pc98:
pc98/conf/files.pc98
(6) Delete empty lines:
pc98/i386/locore.s
(7) Fix (it didn't work if I586 was specified):
pc98/pc98/clock.c
(8) Staticize:
pc98/pc98/pc98_machdep.c
(9) Enable workaround for Cyrix bug for 5x86 also:
pc98/i386/machdep.c
pc98/i386/trap.c
All the above deletes this file too:
pc98/i386/pmap.c
(phew!)
Submitted by: The FreeBSD(98) Development Team
118 lines
3.5 KiB
Makefile
118 lines
3.5 KiB
Makefile
# $Id: Makefile,v 1.3 1996/09/12 11:08:41 asami Exp $
|
|
#
|
|
|
|
PROG= boot
|
|
# Order is very important on the SRCS line for this prog
|
|
SRCS= start.S table.c boot2.S boot.c asm.S bios.S serial.S
|
|
SRCS+= probe_keyboard.c io.c disk.c sys.c
|
|
|
|
BINDIR= /usr/mdec
|
|
BINMODE= 444
|
|
CFLAGS= -O2 -malign-functions=0 -malign-jumps=0 -malign-loops=0 \
|
|
-DPC98 -DBOOTWAIT=${BOOTWAIT} -DTIMEOUT=${TIMEOUT}
|
|
CFLAGS+= -DBOOTSEG=${BOOTSEG} -DBOOTSTACK=${BOOTSTACK}
|
|
CFLAGS+= ${CWARNFLAGS}
|
|
|
|
# Probe the keyboard and use the serial console if the keyboard isn't found.
|
|
.if defined(BOOT_PROBE_KEYBOARD)
|
|
CFLAGS+= -DPROBE_KEYBOARD
|
|
.endif
|
|
|
|
# Probe the keyboard lock and use the serial console if the keyboard is locked.
|
|
.if defined(BOOT_PROBE_KEYBOARD_LOCK)
|
|
CFLAGS+= -DPROBE_KEYBOARD_LOCK
|
|
.endif
|
|
|
|
# Force use of the serial console.
|
|
.if defined(BOOT_FORCE_COMCONSOLE)
|
|
CFLAGS+= -DFORCE_COMCONSOLE
|
|
.endif
|
|
|
|
# By default, if a serial port is going to be used as console, use COM1
|
|
# (aka /dev/ttyd0).
|
|
BOOT_COMCONSOLE_PORT?=0x30
|
|
BOOT_COMCONSOLE_CLK?=16
|
|
BOOT_COMCONSOLE_MODE=0x0c
|
|
CFLAGS+= -DCOMCONSOLE=${BOOT_COMCONSOLE_PORT} \
|
|
-DCOMCONSOLE_CLK=${BOOT_COMCONSOLE_CLK} \
|
|
-DCOMCONSOLE_MODE=${BOOT_COMCONSOLE_MODE}
|
|
|
|
# Enable code to take the default boot string from a fixed location on the
|
|
# disk. See nextboot(8) and README.386BSD for more info.
|
|
#CFLAGS+= -DNAMEBLOCK
|
|
#CFLAGS+= -DNAMEBLOCK_WRITEBACK
|
|
|
|
# Bias the conversion from the BIOS drive number to the FreeBSD unit number
|
|
# for hard disks. This may be useful for people booting in a mixed IDE/SCSI
|
|
# environment (set BOOT_HD_BIAS to the number of IDE drives).
|
|
#CFLAGS+= -DBOOT_HD_BIAS=1
|
|
#
|
|
# Details: this only applies if BOOT_HD_BIAS > 0. If the BIOS drive number
|
|
# for the boot drive is >= BOOT_HD_BIAS, then the boot drive is assumed to
|
|
# be SCSI and have unit number (BIOS_drive_number - BOOT_HD_BIAS). E.g.,
|
|
# BOOT_HD_BIAS=1 makes BIOS drive 1 correspond to 1:sd(0,a) instead of
|
|
# 1:wd(1,a). If `sd' is given explicitly, then the drive is assumed to be
|
|
# SCSI and have BIOS drive number (sd_unit_number + BOOT_HD_BIAS). E.g.,
|
|
# BOOT_HD_BIAS=1 makes sd(0,a) correspond to 1:sd(0,a) instead of 0:sd(0,a).
|
|
|
|
CLEANFILES+= boot.nohdr boot.strip boot1 boot2 sizetest
|
|
DPADD= ${LIBC}
|
|
LDFLAGS+= -N -T 0 -nostdlib
|
|
LDADD= -lc
|
|
#LINKS= ${BINDIR}/sdboot ${BINDIR}/wdboot\
|
|
# ${BINDIR}/sdboot ${BINDIR}/fdboot\
|
|
# ${BINDIR}/bootsd ${BINDIR}/bootwd\
|
|
# ${BINDIR}/bootsd ${BINDIR}/bootfd
|
|
NOSHARED= YES
|
|
NOMAN=
|
|
STRIP=
|
|
|
|
# tunable timeout parameter, waiting for keypress, calibrated in ms
|
|
BOOTWAIT?= 5000
|
|
# tunable timeout during string input, calibrated in ms
|
|
#TIMEOUT?= 30000
|
|
|
|
# Location that boot2 is loaded at
|
|
BOOTSEG= 0x9000
|
|
|
|
# Offset in BOOTSEG for the top of the stack, keep this 16 byte aligned
|
|
BOOTSTACK= 0xFFF0
|
|
|
|
boot.strip: boot
|
|
cp -p boot boot.strip
|
|
strip boot.strip
|
|
size boot.strip
|
|
|
|
boot.nohdr: boot.strip
|
|
dd if=boot.strip of=boot.nohdr ibs=32 skip=1 obs=1024b
|
|
ls -l boot.nohdr
|
|
|
|
boot1: boot.nohdr
|
|
dd if=boot.nohdr of=boot1 bs=512 count=1
|
|
|
|
boot2: boot.nohdr
|
|
dd if=boot.nohdr of=boot2 bs=512 skip=1
|
|
@dd if=boot2 skip=14 of=sizetest 2> /dev/null
|
|
@if [ -s sizetest ] ; then \
|
|
echo "boot2 is too big" >&2 ; \
|
|
rm boot2 ; \
|
|
exit 2 ; \
|
|
fi
|
|
|
|
all: boot1 boot2
|
|
|
|
install:
|
|
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}\
|
|
boot1 ${DESTDIR}${BINDIR}/boot1
|
|
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}\
|
|
boot2 ${DESTDIR}${BINDIR}/boot2
|
|
for i in sd fd wd od vn ; do \
|
|
( cd ${DESTDIR}${BINDIR} ; \
|
|
rm -f boot$${i} $${i}boot ; \
|
|
ln -s boot1 $${i}boot ; \
|
|
ln -s boot2 boot$${i} ; ) \
|
|
done
|
|
|
|
.include <bsd.kern.mk>
|
|
.include <bsd.prog.mk>
|