freebsd-dev/share/doc/handbook/booting.sgml
John Fieber 1e30867d53 Start populating the handbook with useful cross reference targets.
All cross reference labels start with name of the file that contains
them.  A label for the top section level is simply the name of the
file (omitting the .sgml).  Other references within the file append a
colon and onother name.  For example, the label on the mailing list
section in the file eresources.sgml is eresources:mail.  This gives
each file its own cross reference namespace.
1995-06-30 17:37:53 +00:00

176 lines
6.0 KiB
Plaintext

<!-- This is a SGML version of the text on FreeBSD boot procedures
made by Poul-Henning Kamp <phk@FreeBSD.ORG>
This conversion has been made by Ollivier Robert.
$Id: booting.sgml,v 1.3 1995/06/14 18:38:50 jfieber Exp $
<!DOCTYPE linuxdoc PUBLIC "-//FreeBSD//DTD linuxdoc//EN">
<article>
<title>Boot overview</title>
<author>Poul-Henning Kamp, <tt/&lt;phk@login.dknet.dk&gt;/</author>
<date>v1.1, April 26th</date>
<abstract>
Booting FreeBSD is essentially a three step: Load the kernel,
determine the root filesystem and initialize user-land things. This
leads to some interesting possibilities as shown below...
</abstract>
<toc>
-->
<chapt><heading>The FreeBSD Booting Process<label id="booting"></heading>
<p><em>Contributed by &a.phk;. v1.1, April 26th.</em>
Booting FreeBSD is essentially a three step: Load the kernel,
determine the root filesystem and initialize user-land things. This
leads to some interesting possibilities shown below.
<sect>Loading a kernel
<p>
We presently have three basic mechanisms for loading the kernel:
<enum>
<item>biosboot
<item>dosboot
<item>netboot
</enum>
Each will be described in detail below. They all pass some
information to the kernel to help the kernel decide what to do
next.
<sect1>Biosboot
<p>
Biosboot is our ``bootblocks'', it consists of two files, which
will be installed in the first 8Kbytes of the floppy or hard-disk
slice to be booted from.
Biosboot can load a kernel from a FreeBSD filesystem.
<sect1>Dosboot
<p>
Dosboot was written by DI. Christian Gusenbauer, and is
unfortunately at this time one of the few pieces of code that
isn't compilable under FreeBSD itself because it is written for
MicroSoft compilers.
Dosboot will boot the kernel from a MS-DOS file or from a FreeBSD
filesystem partition on the disk. It attempts to negotiate with
the various and strange kinds of memory manglers that lurk in
high memory on MS/DOS systems and usually wins them for it's
case.
<sect1>Netboot
<p>
Netboot will try to find a supported ethernet card, and use
BOOTP, TFTP and NFS to find a kernel file to boot.
<sect>Determine the root filesystem
<p>
Once the kernel is loaded and the boot-code jumps to it, the kernel
will initialize itself, trying to determine what hardware is
present and so on, and then it needs to find a root filesystem.
Presently we support the following types of rootfilesystems:
<itemize>
<item>UFS
<item>MSDOS
<item>MFS
<item>CD9660
<item>NFS
</itemize>
<sect1>UFS
<p>
This is the most normal type of root filesystem. It can reside on
a floppy or on harddisk.
<sect1>MSDOS
<p>
While this is technically possible, it isn't particular useful,
because of ``FAT'' filesystems inability to make links, device
nodes and such ``UNIXisms''.
<sect1>MFS
<p>
This is actually a UFS filesystem which has been compiled into
the kernel. That means that the kernel does not really need any
disks/floppies or other HW to function.
<sect1>CD9660
<p>
This is for using a CD-ROM as root filesystem.
<sect1>NFS
<p>
This is for using a fileserver as root filesystem, basically
making it a diskless machine.
<sect>Initialize user-land things
<p>
To get the user-land going, when the kernel has finished
initialization, it will create a with ``<tt/pid == 1/'' and execute
a program on the rootfilesystem, this program is normally
``<tt>/sbin/init</tt>''.
You can substitute any program for /sbin/init, as long as you keep
in mind that:
there is no stdin/out/err unless you open it yourself, if you exit,
the machine panics signal handling is special for ``<tt/pid ==
1/''.
<sect>Interesting combinations
<p>
Boot a kernel with a MFS in it with a special <tt>/sbin/init</tt>
which...
<descrip>
<tag/A -- Using DOS/
<itemize>
<item>mounts your <tt/C:/ as <tt>/C:</tt>
<item>Attaches <tt>C:/freebsd.fs</tt> on <tt>/dev/vn0</tt>
<item>mounts <tt>/dev/vn0</tt> as <tt>/rootfs</tt>
<item>makes symlinks<newline>
<tt>/rootfs/bin -&gt; /bin</tt><newline>
<tt>/rootfs/etc -&gt; /etc</tt><newline>
<tt>/rootfs/sbin -&gt; /sbin</tt><newline>
...<newline>
</itemize>
Now you run FreeBSD without repartitioning your hard disk...
<tag/B -- Using NFS/
NFS mounts your <tt>server:&tilde;you/FreeBSD</tt> as
<tt>/nfs</tt>, chroots to <tt>/nfs</tt> and executes
<tt>/sbin/init</tt> there
Now you run FreeBSD diskless, even though you don't control
the NFS server...
<tag/C -- Start an X-server/
Now you have an Xterminal, which is better than that dingy
X-under-windows-so-slow-you-can-see-what-it-does thing that
your boss insist is better than forking our money on HW.
<tag/D -- Using a tape/
Takes a copy of <tt>/dev/rwd0</tt> and writes it to a remote tape
station or fileserver.
Now you finally got that backup you should have made a year
ago...
<tag>E -- Acts as a firewall/web-server/what do I know...</tag>
This is particular interesting since you can boot from a write-
protected floppy, but still write to your root filesystem...
</descrip>