524da8c0a8
This is the vastly updated cx drvier from Roman Kurakin <rik@cronyx.ru> who has been patiently waiting for this update for sometime. The driver is mostly a rewrite from the version we have in the tree. While some similarities remain, losing the little history that the old driver has is not a big loss, and the re@ felt it was easier this way (less error prone). The userland parts of this update will be committed shortly. The driver is not connected to the build yet. I want to make sure I don't break any platform at any time, so I want to test that with these files in the tree before I continue (on the off chance I'm forgetting a file). I changed the DEBUG macro to CX_DEBUG from the code that was submitted (to not break when we go to building with opt_global.h after the release), as well adding $FreeBSD$. Submitted by: Roman Kurakin Approved by: re@ <scottl>
487 lines
19 KiB
C
487 lines
19 KiB
C
/*
|
|
* Defines for Cronyx-Sigma adapter, based on Cirrus Logic multiprotocol
|
|
* controller RISC processor CL-CD2400/2401.
|
|
*
|
|
* Copyright (C) 1994-2000 Cronyx Engineering.
|
|
* Author: Serge Vakulenko, <vak@cronyx.ru>
|
|
*
|
|
* This software is distributed with NO WARRANTIES, not even the implied
|
|
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Authors grant any other persons or organisations permission to use
|
|
* or modify this software as long as this message is kept with the software,
|
|
* all derivative works or modified versions.
|
|
*
|
|
* Cronyx Id: cxreg.h,v 1.1.2.1 2003/11/12 17:13:41 rik Exp $
|
|
* $FreeBSD$
|
|
*/
|
|
#define REVCL_MIN 7 /* CD2400 min. revision number G */
|
|
#define REVCL_MAX 13 /* CD2400 max. revision number M */
|
|
#define REVCL31_MIN 0x33 /* CD2431 min. revision number C */
|
|
#define REVCL31_MAX 0x34 /* CD2431 max. revision number D */
|
|
|
|
#define BRD_INTR_LEVEL 0x5a /* interrupt level (arbitrary PILR value) */
|
|
|
|
#define CS0(p) ((p) | 0x8000) /* chip select 0 */
|
|
#define CS1(p) ((p) | 0xc000) /* chip select 1 */
|
|
#define CS1A(p) ((p) | 0x8010) /* chip select 1 for agp-compatible models */
|
|
#define BSR(p) (p) /* board status register, read only */
|
|
#define BCR0(p) (p) /* board command register 0, write only */
|
|
#define BCR1(p) ((p) | 0x2000) /* board command register 1, write only */
|
|
|
|
/*
|
|
* For Sigma-800 only.
|
|
*/
|
|
#define BDET(p) ((p) | 0x2000) /* board detection register, read only */
|
|
#define BCR2(p) ((p) | 0x4000) /* board command register 2, write only */
|
|
|
|
/*
|
|
* Chip register address, B is chip base port, R is chip register number.
|
|
*/
|
|
#define R(b,r) ((b) | (((r)<<6 & 0x3c00) | ((r) & 0xf)))
|
|
|
|
/*
|
|
* Interrupt acknowledge register, P is board port, L is interrupt level,
|
|
* as prodrammed in PILR.
|
|
*/
|
|
#define IACK(p,l) (R(p,l) | 0x4000)
|
|
|
|
/*
|
|
* Global registers.
|
|
*/
|
|
#define GFRCR(b) R(b,0x82) /* global firmware revision code register */
|
|
#define CAR(b) R(b,0xec) /* channel access register */
|
|
|
|
/*
|
|
* Option registers.
|
|
*/
|
|
#define CMR(b) R(b,0x18) /* channel mode register */
|
|
#define COR1(b) R(b,0x13) /* channel option register 1 */
|
|
#define COR2(b) R(b,0x14) /* channel option register 2 */
|
|
#define COR3(b) R(b,0x15) /* channel option register 3 */
|
|
#define COR4(b) R(b,0x16) /* channel option register 4 */
|
|
#define COR5(b) R(b,0x17) /* channel option register 5 */
|
|
#define COR6(b) R(b,0x1b) /* channel option register 6 */
|
|
#define COR7(b) R(b,0x04) /* channel option register 7 */
|
|
#define SCHR1(b) R(b,0x1c) /* special character register 1 */
|
|
#define SCHR2(b) R(b,0x1d) /* special character register 2 */
|
|
#define SCHR3(b) R(b,0x1e) /* special character register 3 */
|
|
#define SCHR4(b) R(b,0x1f) /* special character register 4 */
|
|
#define SCRL(b) R(b,0x20) /* special character range low */
|
|
#define SCRH(b) R(b,0x21) /* special character range high */
|
|
#define LNXT(b) R(b,0x2d) /* LNext character */
|
|
#define RFAR1(b) R(b,0x1c) /* receive frame address register 1 */
|
|
#define RFAR2(b) R(b,0x1d) /* receive frame address register 2 */
|
|
#define RFAR3(b) R(b,0x1e) /* receive frame address register 3 */
|
|
#define RFAR4(b) R(b,0x1f) /* receive frame address register 4 */
|
|
#define CPSR(b) R(b,0xd4) /* CRC polynomial select register */
|
|
|
|
/*
|
|
* Bit rate and clock option registers.
|
|
*/
|
|
#define RBPR(b) R(b,0xc9) /* receive baud rate period register */
|
|
#define RCOR(b) R(b,0xca) /* receive clock option register */
|
|
#define TBPR(b) R(b,0xc1) /* transmit baud rate period register */
|
|
#define TCOR(b) R(b,0xc2) /* receive clock option register */
|
|
|
|
/*
|
|
* Channel command and status registers.
|
|
*/
|
|
#define CCR(b) R(b,0x10) /* channel command register */
|
|
#define STCR(b) R(b,0x11) /* special transmit command register */
|
|
#define CSR(b) R(b,0x19) /* channel status register */
|
|
#define MSVR(b) R(b,0xdc) /* modem signal value register */
|
|
#define MSVR_RTS(b) R(b,0xdc) /* modem RTS setup register */
|
|
#define MSVR_DTR(b) R(b,0xdd) /* modem DTR setup register */
|
|
|
|
/*
|
|
* Interrupt registers.
|
|
*/
|
|
#define LIVR(b) R(b,0x0a) /* local interrupt vector register */
|
|
#define IER(b) R(b,0x12) /* interrupt enable register */
|
|
#define LICR(b) R(b,0x25) /* local interrupting channel register */
|
|
#define STK(b) R(b,0xe0) /* stack register */
|
|
|
|
/*
|
|
* Receive interrupt registers.
|
|
*/
|
|
#define RPILR(b) R(b,0xe3) /* receive priority interrupt level register */
|
|
#define RIR(b) R(b,0xef) /* receive interrupt register */
|
|
#define RISR(b) R(b,0x8a) /* receive interrupt status register */
|
|
#define RISRL(b) R(b,0x8a) /* receive interrupt status register low */
|
|
#define RISRH(b) R(b,0x8b) /* receive interrupt status register high */
|
|
#define RFOC(b) R(b,0x33) /* receive FIFO output count */
|
|
#define RDR(b) R(b,0xf8) /* receive data register */
|
|
#define REOIR(b) R(b,0x87) /* receive end of interrupt register */
|
|
|
|
/*
|
|
* Transmit interrupt registers.
|
|
*/
|
|
#define TPILR(b) R(b,0xe2) /* transmit priority interrupt level reg */
|
|
#define TIR(b) R(b,0xee) /* transmit interrupt register */
|
|
#define TISR(b) R(b,0x89) /* transmit interrupt status register */
|
|
#define TFTC(b) R(b,0x83) /* transmit FIFO transfer count */
|
|
#define TDR(b) R(b,0xf8) /* transmit data register */
|
|
#define TEOIR(b) R(b,0x86) /* transmit end of interrupt register */
|
|
|
|
/*
|
|
* Modem interrupt registers.
|
|
*/
|
|
#define MPILR(b) R(b,0xe1) /* modem priority interrupt level register */
|
|
#define MIR(b) R(b,0xed) /* modem interrupt register */
|
|
#define MISR(b) R(b,0x88) /* modem/timer interrupt status register */
|
|
#define MEOIR(b) R(b,0x85) /* modem end of interrupt register */
|
|
|
|
/*
|
|
* DMA registers.
|
|
*/
|
|
#define DMR(b) R(b,0xf4) /* DMA mode register */
|
|
#define BERCNT(b) R(b,0x8d) /* bus error retry count */
|
|
#define DMABSTS(b) R(b,0x1a) /* DMA buffer status */
|
|
|
|
/*
|
|
* DMA receive registers.
|
|
*/
|
|
#define ARBADRL(b) R(b,0x40) /* A receive buffer address lower */
|
|
#define ARBADRU(b) R(b,0x42) /* A receive buffer address upper */
|
|
#define BRBADRL(b) R(b,0x44) /* B receive buffer address lower */
|
|
#define BRBADRU(b) R(b,0x46) /* B receive buffer address upper */
|
|
#define ARBCNT(b) R(b,0x48) /* A receive buffer byte count */
|
|
#define BRBCNT(b) R(b,0x4a) /* B receive buffer byte count */
|
|
#define ARBSTS(b) R(b,0x4c) /* A receive buffer status */
|
|
#define BRBSTS(b) R(b,0x4d) /* B receive buffer status */
|
|
#define RCBADRL(b) R(b,0x3c) /* receive current buffer address lower */
|
|
#define RCBADRU(b) R(b,0x3e) /* receive current buffer address upper */
|
|
|
|
/*
|
|
* DMA transmit registers.
|
|
*/
|
|
#define ATBADRL(b) R(b,0x50) /* A transmit buffer address lower */
|
|
#define ATBADRU(b) R(b,0x52) /* A transmit buffer address upper */
|
|
#define BTBADRL(b) R(b,0x54) /* B transmit buffer address lower */
|
|
#define BTBADRU(b) R(b,0x56) /* B transmit buffer address upper */
|
|
#define ATBCNT(b) R(b,0x58) /* A transmit buffer byte count */
|
|
#define BTBCNT(b) R(b,0x5a) /* B transmit buffer byte count */
|
|
#define ATBSTS(b) R(b,0x5c) /* A transmit buffer status */
|
|
#define BTBSTS(b) R(b,0x5d) /* B transmit buffer status */
|
|
#define TCBADRL(b) R(b,0x38) /* transmit current buffer address lower */
|
|
#define TCBADRU(b) R(b,0x3a) /* transmit current buffer address upper */
|
|
|
|
/*
|
|
* Timer registers.
|
|
*/
|
|
#define TPR(b) R(b,0xd8) /* timer period register */
|
|
#define RTPR(b) R(b,0x26) /* receive timeout period register */
|
|
#define RTPRL(b) R(b,0x26) /* receive timeout period register low */
|
|
#define RTPTH(b) R(b,0x27) /* receive timeout period register high */
|
|
#define GT1(b) R(b,0x28) /* general timer 1 */
|
|
#define GT1L(b) R(b,0x28) /* general timer 1 low */
|
|
#define GT1H(b) R(b,0x29) /* general timer 1 high */
|
|
#define GT2(b) R(b,0x2a) /* general timer 2 */
|
|
#define TTR(b) R(b,0x2a) /* transmit timer register */
|
|
|
|
/*
|
|
* Board status register bits, for all models.
|
|
*/
|
|
#define BSR_NOINTR 0x01 /* no interrupt pending flag */
|
|
#define BSR_NOCHAIN 0x80 /* no daisy chained board, all but Sigma-22 */
|
|
|
|
/*
|
|
* For old Sigmas only.
|
|
*/
|
|
#define BSR_VAR_MASK 0x66 /* adapter variant mask */
|
|
#define BSR_OSC_MASK 0x18 /* oscillator frequency mask */
|
|
#define BSR_OSC_20 0x18 /* 20 MHz */
|
|
#define BSR_OSC_18432 0x10 /* 18.432 MHz */
|
|
|
|
#define BSR_NODSR(n) (0x100 << (n)) /* DSR from channels 0-3, inverted */
|
|
#define BSR_NOCD(n) (0x1000 << (n)) /* CD from channels 0-3, inverted */
|
|
|
|
/*
|
|
* Board status register bits for Sigma-2x.
|
|
*/
|
|
#define BSR2X_OSC_33 0x08 /* oscillator 33/20 MHz bit */
|
|
#define BSR2X_VAR_MASK 0x30 /* Sigma-2x variant mask */
|
|
|
|
/*
|
|
* Board status register bits for Sigma-800.
|
|
*/
|
|
#define BSR800_NU0 0x02 /* no channels 0-3 installed */
|
|
#define BSR800_NU1 0x04 /* no channels 4-7 installed */
|
|
#define BSR800_LERR 0x08 /* firmware load error */
|
|
#define BSR800_MIRQ 0x10 /* modem IRQ active */
|
|
#define BSR800_TIRQ 0x20 /* transmit IRQ active */
|
|
#define BSR800_RIRQ 0x40 /* receive IRQ active */
|
|
|
|
#define BDET_IB 0x08 /* identification bit */
|
|
#define BDET_IB_NEG 0x80 /* negated identification bit */
|
|
|
|
/*
|
|
* Sigma-800 control register 2 bits.
|
|
*/
|
|
#define BCR2_BUS0 0x01 /* bus timing control */
|
|
#define BCR2_BUS1 0x02 /* bus timing control */
|
|
#define BCR2_TMS 0x08 /* firmware download signal */
|
|
#define BCR2_TDI 0x80 /* firmware download signal */
|
|
|
|
/*
|
|
* Board revision mask.
|
|
*/
|
|
#define BSR_REV_MASK (BSR_OSC_MASK|BSR_VAR_MASK|BSR_NOCHAIN)
|
|
#define BSR2X_REV_MASK (BSR_OSC_MASK|BSR_VAR_MASK)
|
|
|
|
/*
|
|
* Sigma-2x variants.
|
|
*/
|
|
#define CRONYX_22 0x20
|
|
#define CRONYX_24 0x00
|
|
|
|
/*
|
|
* Sigma-XXX variants.
|
|
*/
|
|
#define CRONYX_100 0x64
|
|
#define CRONYX_400 0x62
|
|
#define CRONYX_500 0x60
|
|
#define CRONYX_410 0x24
|
|
#define CRONYX_810 0x20
|
|
#define CRONYX_410s 0x04
|
|
#define CRONYX_810s 0x00
|
|
#define CRONYX_440 0x44
|
|
#define CRONYX_840 0x40
|
|
#define CRONYX_401 0x26
|
|
#define CRONYX_801 0x22
|
|
#define CRONYX_401s 0x06
|
|
#define CRONYX_801s 0x02
|
|
#define CRONYX_404 0x46
|
|
#define CRONYX_703 0x42
|
|
|
|
/*
|
|
* Board control register 0 bits.
|
|
*/
|
|
#define BCR0_IRQ_DIS 0x00 /* no interrupt generated */
|
|
#define BCR0_IRQ_3 0x01 /* select IRQ number 3 */
|
|
#define BCR0_IRQ_5 0x02 /* select IRQ number 5 */
|
|
#define BCR0_IRQ_7 0x03 /* select IRQ number 7 */
|
|
#define BCR0_IRQ_10 0x04 /* select IRQ number 10 */
|
|
#define BCR0_IRQ_11 0x05 /* select IRQ number 11 */
|
|
#define BCR0_IRQ_12 0x06 /* select IRQ number 12 */
|
|
#define BCR0_IRQ_15 0x07 /* select IRQ number 15 */
|
|
#define BCR0_IRQ_MASK 0x07 /* irq select mask */
|
|
|
|
#define BCR0_DMA_DIS 0x00 /* no interrupt generated */
|
|
#define BCR0_DMA_5 0x10 /* select DMA channel 5 */
|
|
#define BCR0_DMA_6 0x20 /* select DMA channel 6 */
|
|
#define BCR0_DMA_7 0x30 /* select DMA channel 7 */
|
|
#define BCR0_DMA_MASK 0x30 /* drq select mask */
|
|
|
|
/* For old Sigmas only. */
|
|
#define BCR0_NORESET 0x08 /* CD2400 reset flag (inverted) */
|
|
|
|
#define BCR0_UM_ASYNC 0x00 /* channel 0 mode - async */
|
|
#define BCR0_UM_SYNC 0x80 /* channel 0 mode - sync */
|
|
#define BCR0_UI_RS232 0x00 /* channel 0 interface - RS-232 */
|
|
#define BCR0_UI_RS449 0x40 /* channel 0 interface - RS-449/V.35 */
|
|
#define BCR0_UMASK 0xc0 /* channel 0 interface mask */
|
|
|
|
/* For Sigma-22 only. */
|
|
#define BCR02X_FAST 0x40 /* fast bus timing */
|
|
#define BCR02X_LED 0x80 /* LED control */
|
|
|
|
/* For Sigma-800 only. */
|
|
#define BCR0800_TCK 0x80 /* firmware download signal */
|
|
|
|
/*
|
|
* Board control register 1 bits.
|
|
*/
|
|
/* For old Sigmas only. */
|
|
#define BCR1_DTR(n) (0x100 << (n)) /* DTR for channels 0-3 sync */
|
|
|
|
/* For Sigma-800 only. */
|
|
#define BCR1800_DTR(n) (1 << ((n) & 7)) /* DTR for channels 0-7 sync */
|
|
|
|
/*
|
|
* Channel commands (CCR).
|
|
*/
|
|
#define CCR_CLRCH 0x40 /* clear channel */
|
|
#define CCR_INITCH 0x20 /* initialize channel */
|
|
#define CCR_RSTALL 0x10 /* reset all channels */
|
|
#define CCR_ENTX 0x08 /* enable transmitter */
|
|
#define CCR_DISTX 0x04 /* disable transmitter */
|
|
#define CCR_ENRX 0x02 /* enable receiver */
|
|
#define CCR_DISRX 0x01 /* disable receiver */
|
|
#define CCR_CLRT1 0xc0 /* clear timer 1 */
|
|
#define CCR_CLRT2 0xa0 /* clear timer 2 */
|
|
#define CCR_CLRRCV 0x90 /* clear receiver */
|
|
#define CCR_CLRTX 0x88 /* clear transmitter */
|
|
|
|
/*
|
|
* Interrupt enable register (IER) bits.
|
|
*/
|
|
#define IER_MDM 0x80 /* modem status changed */
|
|
#define IER_RET 0x20 /* receive exception timeout */
|
|
#define IER_RXD 0x08 /* data received */
|
|
#define IER_TIMER 0x04 /* timer expired */
|
|
#define IER_TXMPTY 0x02 /* transmitter empty */
|
|
#define IER_TXD 0x01 /* data transmitted */
|
|
|
|
/*
|
|
* Modem signal values register bits (MSVR).
|
|
*/
|
|
#define MSV_DSR 0x80 /* state of Data Set Ready input */
|
|
#define MSV_CD 0x40 /* state of Carrier Detect input */
|
|
#define MSV_CTS 0x20 /* state of Clear to Send input */
|
|
#define MSV_TXCOUT 0x10 /* TXCout/DTR pin output flag */
|
|
#define MSV_PORTID 0x04 /* device is CL-CD2401 (not 2400) */
|
|
#define MSV_DTR 0x02 /* state of Data Terminal Ready output */
|
|
#define MSV_RTS 0x01 /* state of Request to Send output */
|
|
#define MSV_BITS "\20\1rts\2dtr\3cd2400\5txcout\6cts\7cd\10dsr"
|
|
|
|
/*
|
|
* DMA buffer status register bits (DMABSTS).
|
|
*/
|
|
#define DMABSTS_TDALIGN 0x80 /* internal data alignment in transmit FIFO */
|
|
#define DMABSTS_RSTAPD 0x40 /* reset append mode */
|
|
#define DMABSTS_CRTTBUF 0x20 /* internal current transmit buffer in use */
|
|
#define DMABSTS_APPEND 0x10 /* append buffer is in use */
|
|
#define DMABSTS_NTBUF 0x08 /* next transmit buffer is B (not A) */
|
|
#define DMABSTS_TBUSY 0x04 /* current transmit buffer is in use */
|
|
#define DMABSTS_NRBUF 0x02 /* next receive buffer is B (not A) */
|
|
#define DMABSTS_RBUSY 0x01 /* current receive buffer is in use */
|
|
|
|
/*
|
|
* Buffer status register bits ([AB][RT]BSTS).
|
|
*/
|
|
#define BSTS_BUSERR 0x80 /* bus error */
|
|
#define BSTS_EOFR 0x40 /* end of frame */
|
|
#define BSTS_EOBUF 0x20 /* end of buffer */
|
|
#define BSTS_APPEND 0x08 /* append mode */
|
|
#define BSTS_INTR 0x02 /* interrupt required */
|
|
#define BSTS_OWN24 0x01 /* buffer is (free to be) used by CD2400 */
|
|
#define BSTS_BITS "\20\1own24\2intr\4append\6eobuf\7eofr\10buserr"
|
|
|
|
/*
|
|
* Receive interrupt status register (RISR) bits.
|
|
*/
|
|
#define RIS_OVERRUN 0x0008 /* overrun error */
|
|
#define RIS_BB 0x0800 /* buffer B status (not A) */
|
|
#define RIS_EOBUF 0x2000 /* end of buffer reached */
|
|
#define RIS_EOFR 0x4000 /* frame reception complete */
|
|
#define RIS_BUSERR 0x8000 /* bus error */
|
|
|
|
#define RISH_CLRDCT 0x0001 /* X.21 clear detect */
|
|
#define RISH_RESIND 0x0004 /* residual indication */
|
|
#define RISH_CRCERR 0x0010 /* CRC error */
|
|
#define RISH_RXABORT 0x0020 /* abort sequence received */
|
|
#define RISH_EOFR 0x0040 /* complete frame received */
|
|
#define RISH_BITS "\20\1clrdct\3resind\4overrun\5crcerr\6rxabort\7eofr\14bb\16eobuf\17eofr\20buserr"
|
|
|
|
#define RISA_BREAK 0x0001 /* break signal detected */
|
|
#define RISA_FRERR 0x0002 /* frame error (bad stop bits) */
|
|
#define RISA_PARERR 0x0004 /* parity error */
|
|
#define RISA_SCMASK 0x0070 /* special character detect mask */
|
|
#define RISA_SCHR1 0x0010 /* special character 1 detected */
|
|
#define RISA_SCHR2 0x0020 /* special character 2 detected */
|
|
#define RISA_SCHR3 0x0030 /* special character 3 detected */
|
|
#define RISA_SCHR4 0x0040 /* special character 4 detected */
|
|
#define RISA_SCRANGE 0x0070 /* special character in range detected */
|
|
#define RISA_TIMEOUT 0x0080 /* receive timeout, no data */
|
|
#define RISA_BITS "\20\1break\2frerr\3parerr\4overrun\5schr1\6schr2\7schr4\10timeout\14bb\16eobuf\17eofr\20buserr"
|
|
|
|
#define RISB_CRCERR 0x0010 /* CRC error */
|
|
#define RISB_RXABORT 0x0020 /* abort sequence received */
|
|
#define RISB_EOFR 0x0040 /* complete frame received */
|
|
|
|
#define RISX_LEADCHG 0x0001 /* CTS lead change */
|
|
#define RISX_PARERR 0x0004 /* parity error */
|
|
#define RISX_SCMASK 0x0070 /* special character detect mask */
|
|
#define RISX_SCHR1 0x0010 /* special character 1 detected */
|
|
#define RISX_SCHR2 0x0020 /* special character 2 detected */
|
|
#define RISX_SCHR3 0x0030 /* special character 3 detected */
|
|
#define RISX_ALLZERO 0x0040 /* all 0 condition detected */
|
|
#define RISX_ALLONE 0x0050 /* all 1 condition detected */
|
|
#define RISX_ALTOZ 0x0060 /* alternating 1 0 condition detected */
|
|
#define RISX_SYN 0x0070 /* SYN detected */
|
|
#define RISX_LEAD 0x0080 /* leading value */
|
|
|
|
/*
|
|
* Channel mode register (CMR) bits.
|
|
*/
|
|
#define CMR_RXDMA 0x80 /* DMA receive transfer mode */
|
|
#define CMR_TXDMA 0x40 /* DMA transmit transfer mode */
|
|
#define CMR_HDLC 0x00 /* HDLC protocol mode */
|
|
#define CMR_BISYNC 0x01 /* BISYNC protocol mode */
|
|
#define CMR_ASYNC 0x02 /* ASYNC protocol mode */
|
|
#define CMR_X21 0x03 /* X.21 protocol mode */
|
|
|
|
/*
|
|
* Modem interrupt status register (MISR) bits.
|
|
*/
|
|
#define MIS_CDSR 0x80 /* DSR changed */
|
|
#define MIS_CCD 0x40 /* CD changed */
|
|
#define MIS_CCTS 0x20 /* CTS changed */
|
|
#define MIS_CGT2 0x02 /* GT2 timer expired */
|
|
#define MIS_CGT1 0x01 /* GT1 timer expired */
|
|
#define MIS_BITS "\20\1gt1\2gt2\6ccts\7ccd\10cdsr"
|
|
|
|
/*
|
|
* Transmit interrupt status register (TISR) bits.
|
|
*/
|
|
#define TIS_BUSERR 0x80 /* Bus error */
|
|
#define TIS_EOFR 0x40 /* End of frame */
|
|
#define TIS_EOBUF 0x20 /* end of transmit buffer reached */
|
|
#define TIS_UNDERRUN 0x10 /* transmit underrun */
|
|
#define TIS_BB 0x08 /* buffer B status (not A) */
|
|
#define TIS_TXEMPTY 0x02 /* transmitter empty */
|
|
#define TIS_TXDATA 0x01 /* transmit data below threshold */
|
|
#define TIS_BITS "\20\1txdata\2txempty\4bb\5underrun\6eobuf\7eofr\10buserr"
|
|
|
|
/*
|
|
* Local interrupt vector register (LIVR) bits.
|
|
*/
|
|
#define LIV_EXCEP 0
|
|
#define LIV_MODEM 1
|
|
#define LIV_TXDATA 2
|
|
#define LIV_RXDATA 3
|
|
|
|
/*
|
|
* Transmit end of interrupt registers (TEOIR) bits.
|
|
*/
|
|
#define TEOI_TERMBUFF 0x80 /* force current buffer to be discarded */
|
|
#define TEOI_EOFR 0x40 /* end of frame in interrupt mode */
|
|
#define TEOI_SETTM2 0x20 /* set general timer 2 in sync mode */
|
|
#define TEOI_SETTM1 0x10 /* set general timer 1 in sync mode */
|
|
#define TEOI_NOTRANSF 0x08 /* no transfer of data on this interrupt */
|
|
|
|
/*
|
|
* Receive end of interrupt registers (REOIR) bits.
|
|
*/
|
|
#define REOI_TERMBUFF 0x80 /* force current buffer to be terminated */
|
|
#define REOI_DISCEXC 0x40 /* discard exception character */
|
|
#define REOI_SETTM2 0x20 /* set general timer 2 */
|
|
#define REOI_SETTM1 0x10 /* set general timer 1 */
|
|
#define REOI_NOTRANSF 0x08 /* no transfer of data */
|
|
#define REOI_GAP_MASK 0x07 /* optional gap size to leave in buffer */
|
|
|
|
/*
|
|
* Special transmit command register (STCR) bits.
|
|
*/
|
|
#define STC_ABORTTX 0x40 /* abort transmission (HDLC mode) */
|
|
#define STC_APPDCMP 0x20 /* append complete (async DMA mode) */
|
|
#define STC_SNDSPC 0x08 /* send special characters (async mode) */
|
|
#define STC_SSPC_MASK 0x07 /* special character select */
|
|
#define STC_SSPC_1 0x01 /* send special character #1 */
|
|
#define STC_SSPC_2 0x02 /* send special character #2 */
|
|
#define STC_SSPC_3 0x03 /* send special character #3 */
|
|
#define STC_SSPC_4 0x04 /* send special character #4 */
|
|
|
|
/*
|
|
* Channel status register (CSR) bits, asynchronous mode.
|
|
*/
|
|
#define CSRA_RXEN 0x80 /* receiver enable */
|
|
#define CSRA_RXFLOFF 0x40 /* receiver flow off */
|
|
#define CSRA_RXFLON 0x20 /* receiver flow on */
|
|
#define CSRA_TXEN 0x08 /* transmitter enable */
|
|
#define CSRA_TXFLOFF 0x04 /* transmitter flow off */
|
|
#define CSRA_TXFLON 0x02 /* transmitter flow on */
|
|
#define CSRA_BITS "\20\2txflon\3txfloff\4txen\6rxflon\7rxfloff\10rxen"
|