freebsd-dev/sys/i386/apm/apm.c
Julian Elischer 53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00

1043 lines
23 KiB
C

/*
* APM (Advanced Power Management) BIOS Device Driver
*
* Copyright (c) 1994 UKAI, Fumitoshi.
* Copyright (c) 1994-1995 by HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*
* This software may be used, modified, copied, and distributed, in
* both source and binary form provided that the above copyright and
* these terms are retained. Under no circumstances is the author
* responsible for the proper functioning of this software, nor does
* the author assume any responsibility for damages incurred with its
* use.
*
* Sep, 1994 Implemented on FreeBSD 1.1.5.1R (Toshiba AVS001WD)
*
* $Id: apm.c,v 1.16 1995/11/28 09:44:42 julian Exp $
*/
#include "apm.h"
#if NAPM > 0
#ifdef __FreeBSD__
#include <sys/param.h>
#include "conf.h"
#ifdef JREMOD
#include <sys/conf.h>
#include <sys/kernel.h>
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /*DEVFS*/
#endif /*JREMOD*/
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/ioctl.h>
#include <sys/file.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include "i386/isa/isa.h"
#include "i386/isa/isa_device.h"
#include <machine/apm_bios.h>
#include <machine/segments.h>
#include <machine/clock.h>
#include <vm/vm.h>
#include <sys/syslog.h>
#include "apm_setup.h"
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
#include <mach/std_types.h>
#include <sys/types.h>
#include <sys/time.h>
#include <device/conf.h>
#include <device/errno.h>
#include <device/tty.h>
#include <device/io_req.h>
#include <kern/time_out.h>
#include <i386/ipl.h>
#include <i386/pio.h>
#include <i386/seg.h>
#include <i386/machspl.h>
#include <chips/busses.h>
#include <i386at/apm_bios.h>
#include <i386at/apm_setup.h>
#include <i386at/apm_segments.h>
#endif /* MACH_KERNEL */
extern int apm_display_off __P((void));
extern int apm_int __P((u_long *eax, u_long *ebx, u_long *ecx));
extern void apm_resume __P((void));
/* static data */
struct apm_softc {
int initialized, active, halt_cpu;
u_int minorversion, majorversion;
u_int cs32_base, cs16_base, ds_base;
u_int cs_limit, ds_limit;
u_int cs_entry;
u_int intversion;
int idle_cpu, disabled, disengaged;
struct apmhook sc_suspend;
struct apmhook sc_resume;
};
static struct apm_softc apm_softc[NAPM];
static struct apm_softc *master_softc = NULL; /* XXX */
struct apmhook *hook[NAPM_HOOK]; /* XXX */
#ifdef APM_SLOWSTART
int apm_slowstart = 0;
int apm_ss_cnt = 0;
static int apm_slowstart_p = 0;
int apm_slowstart_stat = 0;
#endif /* APM_SLOWSTART */
#ifdef MACH_KERNEL
extern struct fake_descriptor gdt[GDTSZ];
extern void fix_desc(struct fake_descriptor *, int);
#endif /* MACH_KERNEL */
#define is_enabled(foo) ((foo) ? "enabled" : "disabled")
/* Map version number to integer (keeps ordering of version numbers) */
#define INTVERSION(major, minor) ((major)*100 + (minor))
#ifdef __FreeBSD__
static timeout_t apm_timeout;
#ifdef JREMOD
#define CDEV_MAJOR 39
#endif /* JREMOD */
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
static void apm_timeout(void *);
#endif /* MACH_KERNEL */
/* setup APM GDT discriptors */
static void
setup_apm_gdt(u_int code32_base, u_int code16_base, u_int data_base, u_int code_limit, u_int data_limit)
{
#ifdef __FreeBSD__
/* setup 32bit code segment */
gdt_segs[GAPMCODE32_SEL].ssd_base = code32_base;
gdt_segs[GAPMCODE32_SEL].ssd_limit = code_limit;
/* setup 16bit code segment */
gdt_segs[GAPMCODE16_SEL].ssd_base = code16_base;
gdt_segs[GAPMCODE16_SEL].ssd_limit = code_limit;
/* setup data segment */
gdt_segs[GAPMDATA_SEL ].ssd_base = data_base;
gdt_segs[GAPMDATA_SEL ].ssd_limit = data_limit;
/* reflect these changes on physical GDT */
ssdtosd(gdt_segs + GAPMCODE32_SEL, &gdt[GAPMCODE32_SEL].sd);
ssdtosd(gdt_segs + GAPMCODE16_SEL, &gdt[GAPMCODE16_SEL].sd);
ssdtosd(gdt_segs + GAPMDATA_SEL , &gdt[GAPMDATA_SEL ].sd);
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
/* setup 32bit code segment */
gdt[sel_idx(GAPMCODE32_SEL)].offset = code32_base;
gdt[sel_idx(GAPMCODE32_SEL)].lim_or_seg = code_limit;
gdt[sel_idx(GAPMCODE32_SEL)].size_or_wdct = SZ_32;
gdt[sel_idx(GAPMCODE32_SEL)].access = ACC_P | ACC_PL_K | ACC_CODE_R;
/* setup 16bit code segment */
gdt[sel_idx(GAPMCODE16_SEL)].offset = code16_base;
gdt[sel_idx(GAPMCODE16_SEL)].lim_or_seg = code_limit;
gdt[sel_idx(GAPMCODE16_SEL)].size_or_wdct = 0;
gdt[sel_idx(GAPMCODE16_SEL)].access = ACC_P | ACC_PL_K | ACC_CODE_R;
/* setup data segment */
gdt[sel_idx(GAPMDATA_SEL )].offset = data_base;
gdt[sel_idx(GAPMDATA_SEL )].lim_or_seg = data_limit;
gdt[sel_idx(GAPMDATA_SEL )].size_or_wdct = 0;
gdt[sel_idx(GAPMDATA_SEL )].access = ACC_P | ACC_PL_K | ACC_DATA_W;
/* reflect these changes on physical GDT */
fix_desc(gdt + sel_idx(GAPMCODE32_SEL), 1);
fix_desc(gdt + sel_idx(GAPMCODE16_SEL), 1);
fix_desc(gdt + sel_idx(GAPMDATA_SEL) , 1);
#endif /* MACH_KERNEL */
}
/* 48bit far pointer */
struct addr48 {
u_long offset;
u_short segment;
} apm_addr;
int apm_errno;
inline
int
apm_int(u_long *eax, u_long *ebx, u_long *ecx)
{
u_long cf;
__asm ("pushl %%ebp
pushl %%edx
pushl %%esi
xorl %3,%3
movl %3,%%esi
lcall _apm_addr
jnc 1f
incl %3
1:
popl %%esi
popl %%edx
popl %%ebp"
: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=D" (cf)
: "0" (*eax), "1" (*ebx), "2" (*ecx)
);
apm_errno = ((*eax) >> 8) & 0xff;
return cf;
}
/* enable/disable power management */
static int
apm_enable_disable_pm(struct apm_softc *sc, int enable)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_ENABLEDISABLEPM;
if (sc->intversion >= INTVERSION(1, 1)) {
ebx = PMDV_ALLDEV;
} else {
ebx = 0xffff; /* APM version 1.0 only */
}
ecx = enable;
return apm_int(&eax, &ebx, &ecx);
}
/* Tell APM-BIOS that WE will do 1.1 and see what they say... */
static void
apm_driver_version(void)
{
u_long eax, ebx, ecx;
#ifdef APM_DEBUG
eax = (APM_BIOS<<8) | APM_INSTCHECK;
ebx = 0x0;
ecx = 0x0101;
i = apm_int(&eax, &ebx, &ecx);
printf("[%04lx %04lx %04lx %ld %02x]\n",
eax, ebx, ecx, i, apm_errno);
#endif
eax = (APM_BIOS << 8) | APM_DRVVERSION;
ebx = 0x0;
ecx = 0x0101;
if(!apm_int(&eax, &ebx, &ecx))
apm_version = eax & 0xffff;
#ifdef APM_DEBUG
eax = (APM_BIOS << 8) | APM_INSTCHECK;
ebx = 0x0;
ecx = 0x0101;
i = apm_int(&eax, &ebx, &ecx);
printf("[%04lx %04lx %04lx %ld %02x]\n",
eax, ebx, ecx, i, apm_errno);
#endif
}
/* engage/disengage power management (APM 1.1 or later) */
static int
apm_engage_disengage_pm(struct apm_softc *sc, int engage)
{
u_long eax, ebx, ecx, i;
eax = (APM_BIOS << 8) | APM_ENGAGEDISENGAGEPM;
ebx = PMDV_ALLDEV;
ecx = engage;
i = apm_int(&eax, &ebx, &ecx);
return i;
}
/* get PM event */
static u_int
apm_getevent(struct apm_softc *sc)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_GETPMEVENT;
ebx = 0;
ecx = 0;
if (apm_int(&eax, &ebx, &ecx))
return PMEV_NOEVENT;
return ebx & 0xffff;
}
/* suspend entire system */
static int
apm_suspend_system(struct apm_softc *sc)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_SETPWSTATE;
ebx = PMDV_ALLDEV;
ecx = PMST_SUSPEND;
__asm("cli");
if (apm_int(&eax, &ebx, &ecx)) {
__asm("sti");
printf("Entire system suspend failure: errcode = %ld\n",
0xff & (eax >> 8));
return 1;
}
__asm("sti");
return 0;
}
/* Display control */
/*
* Experimental implementation: My laptop machine can't handle this function
* If your laptop can control the display via APM, please inform me.
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*/
int
apm_display_off(void)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_SETPWSTATE;
ebx = PMDV_2NDSTORAGE0;
ecx = PMST_STANDBY;
if (apm_int(&eax, &ebx, &ecx)) {
printf("Display off failure: errcode = %ld\n",
0xff & (eax >> 8));
return 1;
}
return 0;
}
/* APM Battery low handler */
static void
apm_battery_low(struct apm_softc *sc)
{
printf("\007\007 * * * BATTERY IS LOW * * * \007\007");
}
/* APM hook manager */
static struct apmhook *
apm_add_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
#if 0
printf("Add hook \"%s\"\n", ah->ah_name);
#endif
s = splhigh();
if (ah == NULL) {
panic("illegal apm_hook!");
}
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next) {
if (p->ah_order > ah->ah_order) {
break;
}
}
if (prev == NULL) {
ah->ah_next = *list;
*list = ah;
} else {
ah->ah_next = prev->ah_next;
prev->ah_next = ah;
}
splx(s);
return ah;
}
static void
apm_del_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
s = splhigh();
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next) {
if (p == ah) {
goto deleteit;
}
}
panic("Tried to delete unregistered apm_hook.");
goto nosuchnode;
deleteit:
if (prev != NULL) {
prev->ah_next = p->ah_next;
} else {
*list = p->ah_next;
}
nosuchnode:
splx(s);
}
/* APM driver calls some functions automatically */
static void
apm_execute_hook(struct apmhook *list)
{
struct apmhook *p;
for (p = list; p != NULL; p = p->ah_next) {
#if 0
printf("Execute APM hook \"%s.\"\n", p->ah_name);
#endif
if ((*(p->ah_fun))(p->ah_arg)) {
printf("Warning: APM hook \"%s\" failed", p->ah_name);
}
}
}
/* establish an apm hook */
struct apmhook *
apm_hook_establish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return NULL;
return apm_add_hook(&hook[apmh], ah);
}
/* disestablish an apm hook */
void
apm_hook_disestablish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return;
apm_del_hook(&hook[apmh], ah);
}
static struct timeval suspend_time;
static struct timeval diff_time;
static int
apm_default_resume(void *arg)
{
#ifdef __FreeBSD__
int pl;
u_int second, minute, hour;
struct timeval resume_time, tmp_time;
/* modified for adjkerntz */
pl = splsoftclock();
inittodr(0); /* adjust time to RTC */
microtime(&resume_time);
tmp_time = time; /* because 'time' is volatile */
timevaladd(&tmp_time, &diff_time);
time = tmp_time;
splx(pl);
second = resume_time.tv_sec - suspend_time.tv_sec;
hour = second / 3600;
second %= 3600;
minute = second / 60;
second %= 60;
log(LOG_NOTICE, "resumed from suspended mode (slept %02d:%02d:%02d)\n",
hour, minute, second);
#endif /* __FreeBSD__ */
return 0;
}
static int
apm_default_suspend(void *arg)
{
#ifdef __FreeBSD__
int pl;
pl = splsoftclock();
microtime(&diff_time);
inittodr(0);
microtime(&suspend_time);
timevalsub(&diff_time, &suspend_time);
splx(pl);
#if 0
printf("diff_time = %d:%d\n", diff_time.tv_sec, diff_time.tv_usec);
#endif
#endif /* __FreeBSD__ */
return 0;
}
static void apm_processevent(struct apm_softc *);
/*
* Public interface to the suspend/resume:
*
* Execute suspend and resume hook before and after sleep, respectively.
*
*/
void
apm_suspend(void)
{
struct apm_softc *sc;
sc = master_softc; /* XXX */
if (!sc)
return;
if (sc->initialized) {
apm_execute_hook(hook[APM_HOOK_SUSPEND]);
apm_suspend_system(sc);
apm_processevent(sc);
}
}
void
apm_resume(void)
{
struct apm_softc *sc;
sc = master_softc; /* XXX */
if (!sc)
return;
if (sc->initialized) {
apm_execute_hook(hook[APM_HOOK_RESUME]);
}
}
/* get APM information */
static int
apm_get_info(struct apm_softc *sc, apm_info_t aip)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_GETPWSTATUS;
ebx = PMDV_ALLDEV;
ecx = 0;
if (apm_int(&eax, &ebx, &ecx))
return 1;
aip->ai_acline = (ebx >> 8) & 0xff;
aip->ai_batt_stat = ebx & 0xff;
aip->ai_batt_life = ecx & 0xff;
aip->ai_major = (u_int)sc->majorversion;
aip->ai_minor = (u_int)sc->minorversion;
return 0;
}
/* inform APM BIOS that CPU is idle */
void
apm_cpu_idle(void)
{
struct apm_softc *sc = master_softc; /* XXX */
if (sc->idle_cpu) {
if (sc->active) {
__asm ("movw $0x5305, %ax; lcall _apm_addr");
}
}
/*
* Some APM implementation halts CPU in BIOS, whenever
* "CPU-idle" function are invoked, but swtch() of
* FreeBSD halts CPU, therefore, CPU is halted twice
* in the sched loop. It makes the interrupt latency
* terribly long and be able to cause a serious problem
* in interrupt processing. We prevent it by removing
* "hlt" operation from swtch() and managed it under
* APM driver.
*/
/*
* UKAI Note: on NetBSD, idle() called from cpu_switch()
* doesn't halt CPU, so halt_cpu may not need on NetBSD/i386
* or only "sti" operation would be needed.
*/
if (!sc->active || sc->halt_cpu) {
__asm("sti ; hlt"); /* wait for interrupt */
}
}
/* inform APM BIOS that CPU is busy */
void
apm_cpu_busy(void)
{
struct apm_softc *sc = master_softc; /* XXX */
if (sc->idle_cpu && sc->active) {
__asm("movw $0x5306, %ax; lcall _apm_addr");
}
}
/*
* APM timeout routine:
*
* This routine is automatically called by timer once per second.
*/
static void
apm_timeout(void *arg)
{
struct apm_softc *sc = arg;
apm_processevent(sc);
timeout(apm_timeout, (void *)sc, hz - 1 ); /* More than 1 Hz */
}
/* enable APM BIOS */
static void
apm_event_enable(struct apm_softc *sc)
{
#ifdef APM_DEBUG
printf("called apm_event_enable()\n");
#endif
if (sc->initialized) {
sc->active = 1;
apm_timeout(sc);
}
}
/* disable APM BIOS */
static void
apm_event_disable(struct apm_softc *sc)
{
#ifdef APM_DEBUG
printf("called apm_event_disable()\n");
#endif
if (sc->initialized) {
untimeout(apm_timeout, NULL);
sc->active = 0;
}
}
/* halt CPU in scheduling loop */
static void
apm_halt_cpu(struct apm_softc *sc)
{
if (sc->initialized) {
sc->halt_cpu = 1;
}
#ifdef APM_SLOWSTART
apm_slowstart = 0;
#endif /* APM_SLOWSTART */
}
/* don't halt CPU in scheduling loop */
static void
apm_not_halt_cpu(struct apm_softc *sc)
{
if (sc->initialized) {
sc->halt_cpu = 0;
}
#ifdef APM_SLOWSTART
apm_slowstart = apm_slowstart_p;
#endif /* APM_SLOWSTART */
}
/* device driver definitions */
#ifdef __FreeBSD__
int apmprobe (struct isa_device *);
int apmattach(struct isa_device *);
struct isa_driver apmdriver = {
apmprobe, apmattach, "apm" };
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int apmprobe(vm_offset_t, struct bus_ctlr *);
void apmattach(struct bus_device *);
static struct bus_device *apminfo[NAPM];
static vm_offset_t apmstd[NAPM] = { 0 };
struct bus_driver apmdriver = {
apmprobe, 0, apmattach, 0, apmstd, "apm", apminfo, 0, 0, 0};
#endif /* MACH_KERNEL */
/*
* probe APM (dummy):
*
* APM probing routine is placed on locore.s and apm_init.S because
* this process forces the CPU to turn to real mode or V86 mode.
* Current version uses real mode, but on future version, we want
* to use V86 mode in APM initialization.
*/
int
#ifdef __FreeBSD__
apmprobe(struct isa_device *dvp)
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
apmprobe(vm_offset_t port, struct bus_ctlr *devc)
#endif /* MACH_KERNEL */
{
#ifdef __FreeBSD__
int unit = dvp->id_unit;
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int unit = devc->unit;
#endif /* MACH_KERNEL */
switch (apm_version) {
case APMINI_CANTFIND:
/* silent */
return 0;
case APMINI_NOT32BIT:
printf("apm%d: 32bit connection is not supported.\n", unit);
return 0;
case APMINI_CONNECTERR:
printf("apm%d: 32-bit connection error.\n", unit);
return 0;
}
return -1;
}
/* Process APM event */
static void
apm_processevent(struct apm_softc *sc)
{
int apm_event;
#ifdef APM_DEBUG
# define OPMEV_DEBUGMESSAGE(symbol) case symbol: \
printf("Original APM Event: " #symbol "\n");
#else
# define OPMEV_DEBUGMESSAGE(symbol) case symbol:
#endif
while (1) {
apm_event = apm_getevent(sc);
if (apm_event == PMEV_NOEVENT)
break;
switch (apm_event) {
OPMEV_DEBUGMESSAGE(PMEV_STANDBYREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_SUSPENDREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_USERSUSPENDREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_CRITSUSPEND);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_NORMRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_CRITRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_STANDBYRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_BATTERYLOW);
apm_battery_low(sc);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_POWERSTATECHANGE);
break;
OPMEV_DEBUGMESSAGE(PMEV_UPDATETIME);
inittodr(0); /* adjust time to RTC */
break;
default:
printf("Unknown Original APM Event 0x%x\n", apm_event);
break;
}
}
}
/*
* Attach APM:
*
* Initialize APM driver (APM BIOS itself has been initialized in locore.s)
*
* Now, unless I'm mad, (not quite ruled out yet), the APM-1.1 spec is bogus:
*
* Appendix C says under the header "APM 1.0/APM 1.1 Modal BIOS Behavior"
* that "When an APM Driver connects with an APM 1.1 BIOS, the APM 1.1 BIOS
* will default to an APM 1.0 connection. After an APM Driver calls the APM
* Driver Version function, specifying that it supports APM 1.1, and [sic!]
* APM BIOS will change its behavior to an APM 1.1 connection. If the APM
* BIOS is an APM 1.0 BIOS, the APM Driver Version function call will fail,
* and the connection will remain an APM 1.0 connection."
*
* OK so I can establish a 1.0 connection, and then tell that I'm a 1.1
* and maybe then the BIOS will tell that it too is a 1.1.
* Fine.
* Now how will I ever get the segment-limits for instance ? There is no
* way I can see that I can get a 1.1 response back from an "APM Protected
* Mode 32-bit Interface Connect" function ???
*
* Who made this, Intel and Microsoft ? -- How did you guess !
*
* /phk
*/
#ifdef __FreeBSD__
int
apmattach(struct isa_device *dvp)
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
void
apmattach(struct bus_device *dvp)
#endif /* MACH_KERNEL */
{
#ifdef __FreeBSD__
int unit = dvp->id_unit;
#define APM_KERNBASE KERNBASE
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int unit = dvp->unit;
#define APM_KERNBASE VM_MIN_KERNEL_ADDRESS
#endif /* MACH_KERNEL */
struct apm_softc *sc = &apm_softc[unit];
master_softc = sc; /* XXX */
sc->initialized = 0;
sc->active = 0;
sc->halt_cpu = 1;
/* setup APM parameters */
sc->cs16_base = (apm_cs32_base << 4) + APM_KERNBASE;
sc->cs32_base = (apm_cs16_base << 4) + APM_KERNBASE;
sc->ds_base = (apm_ds_base << 4) + APM_KERNBASE;
sc->cs_limit = apm_cs_limit;
sc->ds_limit = apm_ds_limit;
sc->cs_entry = apm_cs_entry;
sc->idle_cpu = ((apm_flags & APM_CPUIDLE_SLOW) != 0);
sc->disabled = ((apm_flags & APM_DISABLED) != 0);
sc->disengaged = ((apm_flags & APM_DISENGAGED) != 0);
#ifdef APM_SLOWSTART
if (sc->idle_cpu) {
apm_slowstart = apm_slowstart_p = 1;
}
#endif
/* print bootstrap messages */
#ifdef APM_DEBUG
printf(" found APM BIOS version %04x\n", apm_version);
printf("apm%d: Code32 0x%08x, Code16 0x%08x, Data 0x%08x\n",
unit, sc->cs32_base, sc->cs16_base, sc->ds_base);
printf("apm%d: Code entry 0x%08x, Idling CPU %s, Management %s\n",
unit, sc->cs_entry, is_enabled(sc->idle_cpu),
is_enabled(!sc->disabled));
printf("apm%d: CS_limit=%x, DS_limit=%x\n",
unit, sc->cs_limit, sc->ds_limit);
#endif /* APM_DEBUG */
sc->cs_limit = 0xffff;
sc->ds_limit = 0xffff;
/* setup GDT */
setup_apm_gdt(sc->cs32_base, sc->cs16_base, sc->ds_base,
sc->cs_limit, sc->ds_limit);
/* setup entry point 48bit pointer */
#ifdef __FreeBSD__
apm_addr.segment = GSEL(GAPMCODE32_SEL, SEL_KPL);
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
apm_addr.segment = GAPMCODE32_SEL;
#endif /* MACH_KERNEL */
apm_addr.offset = sc->cs_entry;
/* Try to kick bios into 1.1 mode */
apm_driver_version();
sc->minorversion = ((apm_version & 0x00f0) >> 4) * 10 +
((apm_version & 0x000f) >> 0);
sc->majorversion = ((apm_version & 0xf000) >> 12) * 10 +
((apm_version & 0x0f00) >> 8);
sc->intversion = INTVERSION(sc->majorversion, sc->minorversion);
if (sc->intversion >= INTVERSION(1, 1)) {
printf("apm%d: Engaged control %s\n",
unit, is_enabled(!sc->disengaged));
}
printf(" found APM BIOS version %d.%d\n",
sc->majorversion, sc->minorversion);
printf("apm%d: Idling CPU %s\n", unit, is_enabled(sc->idle_cpu));
/* enable power management */
if (sc->disabled) {
if (apm_enable_disable_pm(sc, 1)) {
printf("Warning: APM enable function failed! [%x]\n",
apm_errno);
}
}
/* engage power managment (APM 1.1 or later) */
if (sc->intversion >= INTVERSION(1, 1) && sc->disengaged) {
if (apm_engage_disengage_pm(sc, 1)) {
printf("Warning: APM engage function failed [%x]\n",
apm_errno);
}
}
/* default suspend hook */
sc->sc_suspend.ah_fun = apm_default_suspend;
sc->sc_suspend.ah_arg = sc;
sc->sc_suspend.ah_name = "default suspend";
sc->sc_suspend.ah_order = APM_MAX_ORDER;
/* default resume hook */
sc->sc_resume.ah_fun = apm_default_resume;
sc->sc_resume.ah_arg = sc;
sc->sc_resume.ah_name = "default resume";
sc->sc_resume.ah_order = APM_MIN_ORDER;
apm_hook_establish(APM_HOOK_SUSPEND, &sc->sc_suspend);
apm_hook_establish(APM_HOOK_RESUME , &sc->sc_resume);
apm_event_enable(sc);
sc->initialized = 1;
#ifdef __FreeBSD__
return 0;
#endif /* __FreeBSD__ */
}
#ifdef __FreeBSD__
int
apmopen(dev_t dev, int flag, int fmt, struct proc *p)
{
struct apm_softc *sc = &apm_softc[minor(dev)];
if (minor(dev) >= NAPM) {
return (ENXIO);
}
if (!sc->initialized) {
return ENXIO;
}
return 0;
}
int
apmclose(dev_t dev, int flag, int fmt, struct proc *p)
{
return 0;
}
int
apmioctl(dev_t dev, int cmd, caddr_t addr, int flag, struct proc *p)
{
struct apm_softc *sc = &apm_softc[minor(dev)];
int error = 0;
#ifdef APM_DEBUG
printf("APM ioctl: minor = %d, cmd = 0x%x\n", minor(dev), cmd);
#endif
if (minor(dev) >= NAPM) {
return ENXIO;
}
if (!sc->initialized) {
return ENXIO;
}
switch (cmd) {
case APMIO_SUSPEND:
apm_suspend();
break;
case APMIO_GETINFO:
if (apm_get_info(sc, (apm_info_t)addr)) {
error = ENXIO;
}
break;
case APMIO_ENABLE:
apm_event_enable(sc);
break;
case APMIO_DISABLE:
apm_event_disable(sc);
break;
case APMIO_HALTCPU:
apm_halt_cpu(sc);
break;
case APMIO_NOTHALTCPU:
apm_not_halt_cpu(sc);
break;
case APMIO_DISPLAYOFF:
if (apm_display_off()) {
error = ENXIO;
}
break;
default:
error = EINVAL;
break;
}
return error;
}
#ifdef JREMOD
struct cdevsw apm_cdevsw =
{ apmopen, apmclose, noread, nowrite, /*39*/
apmioctl, nostop, nullreset, nodevtotty,/* APM */
seltrue, nommap, NULL };
static apm_devsw_installed = 0;
static void apm_drvinit(void *unused)
{
dev_t dev;
if( ! apm_devsw_installed ) {
dev = makedev(CDEV_MAJOR,0);
cdevsw_add(&dev,&apm_cdevsw,NULL);
apm_devsw_installed = 1;
#ifdef DEVFS
{
int x;
/* default for a simple device with no probe routine (usually delete this) */
x=devfs_add_devsw(
/* path name devsw minor type uid gid perm*/
"/", "apm", major(dev), 0, DV_CHR, 0, 0, 0600);
}
}
#endif
}
SYSINIT(apmdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,apm_drvinit,NULL)
#endif /* JREMOD */
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
io_return_t apmopen(dev_t dev, int flag, io_req_t ior)
{
int result;
result = ENXIO;
return result;
}
io_return_t apmclose(dev_t dev, int flag)
{
return 0;
}
io_return_t apmgetstat(dev_t dev, int flavor, int *data, u_int *count)
{
}
io_return_t apmsetstat(dev_t dev, int flavor, int *data, u_int count)
{
}
#endif /* MACH_KERNEL */
#endif /* NAPM > 0 */