76039bc84f
to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
1504 lines
40 KiB
C
1504 lines
40 KiB
C
/*-
|
|
* Copyright (c) 1997, 1998, 1999, 2000-2003
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* ASIX Electronics AX88172/AX88178/AX88778 USB 2.0 ethernet driver.
|
|
* Used in the LinkSys USB200M and various other adapters.
|
|
*
|
|
* Manuals available from:
|
|
* http://www.asix.com.tw/datasheet/mac/Ax88172.PDF
|
|
* Note: you need the manual for the AX88170 chip (USB 1.x ethernet
|
|
* controller) to find the definitions for the RX control register.
|
|
* http://www.asix.com.tw/datasheet/mac/Ax88170.PDF
|
|
*
|
|
* Written by Bill Paul <wpaul@windriver.com>
|
|
* Senior Engineer
|
|
* Wind River Systems
|
|
*/
|
|
|
|
/*
|
|
* The AX88172 provides USB ethernet supports at 10 and 100Mbps.
|
|
* It uses an external PHY (reference designs use a RealTek chip),
|
|
* and has a 64-bit multicast hash filter. There is some information
|
|
* missing from the manual which one needs to know in order to make
|
|
* the chip function:
|
|
*
|
|
* - You must set bit 7 in the RX control register, otherwise the
|
|
* chip won't receive any packets.
|
|
* - You must initialize all 3 IPG registers, or you won't be able
|
|
* to send any packets.
|
|
*
|
|
* Note that this device appears to only support loading the station
|
|
* address via autload from the EEPROM (i.e. there's no way to manaully
|
|
* set it).
|
|
*
|
|
* (Adam Weinberger wanted me to name this driver if_gir.c.)
|
|
*/
|
|
|
|
/*
|
|
* Ax88178 and Ax88772 support backported from the OpenBSD driver.
|
|
* 2007/02/12, J.R. Oldroyd, fbsd@opal.com
|
|
*
|
|
* Manual here:
|
|
* http://www.asix.com.tw/FrootAttach/datasheet/AX88178_datasheet_Rev10.pdf
|
|
* http://www.asix.com.tw/FrootAttach/datasheet/AX88772_datasheet_Rev10.pdf
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include "usbdevs.h"
|
|
|
|
#define USB_DEBUG_VAR axe_debug
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_process.h>
|
|
|
|
#include <dev/usb/net/usb_ethernet.h>
|
|
#include <dev/usb/net/if_axereg.h>
|
|
|
|
/*
|
|
* AXE_178_MAX_FRAME_BURST
|
|
* max frame burst size for Ax88178 and Ax88772
|
|
* 0 2048 bytes
|
|
* 1 4096 bytes
|
|
* 2 8192 bytes
|
|
* 3 16384 bytes
|
|
* use the largest your system can handle without USB stalling.
|
|
*
|
|
* NB: 88772 parts appear to generate lots of input errors with
|
|
* a 2K rx buffer and 8K is only slightly faster than 4K on an
|
|
* EHCI port on a T42 so change at your own risk.
|
|
*/
|
|
#define AXE_178_MAX_FRAME_BURST 1
|
|
|
|
#define AXE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
|
|
#ifdef USB_DEBUG
|
|
static int axe_debug = 0;
|
|
|
|
static SYSCTL_NODE(_hw_usb, OID_AUTO, axe, CTLFLAG_RW, 0, "USB axe");
|
|
SYSCTL_INT(_hw_usb_axe, OID_AUTO, debug, CTLFLAG_RW, &axe_debug, 0,
|
|
"Debug level");
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/products.
|
|
*/
|
|
static const STRUCT_USB_HOST_ID axe_devs[] = {
|
|
#define AXE_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) }
|
|
AXE_DEV(ABOCOM, UF200, 0),
|
|
AXE_DEV(ACERCM, EP1427X2, 0),
|
|
AXE_DEV(APPLE, ETHERNET, AXE_FLAG_772),
|
|
AXE_DEV(ASIX, AX88172, 0),
|
|
AXE_DEV(ASIX, AX88178, AXE_FLAG_178),
|
|
AXE_DEV(ASIX, AX88772, AXE_FLAG_772),
|
|
AXE_DEV(ASIX, AX88772A, AXE_FLAG_772A),
|
|
AXE_DEV(ASIX, AX88772B, AXE_FLAG_772B),
|
|
AXE_DEV(ASIX, AX88772B_1, AXE_FLAG_772B),
|
|
AXE_DEV(ATEN, UC210T, 0),
|
|
AXE_DEV(BELKIN, F5D5055, AXE_FLAG_178),
|
|
AXE_DEV(BILLIONTON, USB2AR, 0),
|
|
AXE_DEV(CISCOLINKSYS, USB200MV2, AXE_FLAG_772A),
|
|
AXE_DEV(COREGA, FETHER_USB2_TX, 0),
|
|
AXE_DEV(DLINK, DUBE100, 0),
|
|
AXE_DEV(DLINK, DUBE100B1, AXE_FLAG_772),
|
|
AXE_DEV(DLINK, DUBE100C1, AXE_FLAG_772B),
|
|
AXE_DEV(GOODWAY, GWUSB2E, 0),
|
|
AXE_DEV(IODATA, ETGUS2, AXE_FLAG_178),
|
|
AXE_DEV(JVC, MP_PRX1, 0),
|
|
AXE_DEV(LENOVO, ETHERNET, AXE_FLAG_772B),
|
|
AXE_DEV(LINKSYS2, USB200M, 0),
|
|
AXE_DEV(LINKSYS4, USB1000, AXE_FLAG_178),
|
|
AXE_DEV(LOGITEC, LAN_GTJU2A, AXE_FLAG_178),
|
|
AXE_DEV(MELCO, LUAU2KTX, 0),
|
|
AXE_DEV(MELCO, LUA3U2AGT, AXE_FLAG_178),
|
|
AXE_DEV(NETGEAR, FA120, 0),
|
|
AXE_DEV(OQO, ETHER01PLUS, AXE_FLAG_772),
|
|
AXE_DEV(PLANEX3, GU1000T, AXE_FLAG_178),
|
|
AXE_DEV(SITECOM, LN029, 0),
|
|
AXE_DEV(SITECOMEU, LN028, AXE_FLAG_178),
|
|
AXE_DEV(SYSTEMTALKS, SGCX2UL, 0),
|
|
#undef AXE_DEV
|
|
};
|
|
|
|
static device_probe_t axe_probe;
|
|
static device_attach_t axe_attach;
|
|
static device_detach_t axe_detach;
|
|
|
|
static usb_callback_t axe_bulk_read_callback;
|
|
static usb_callback_t axe_bulk_write_callback;
|
|
|
|
static miibus_readreg_t axe_miibus_readreg;
|
|
static miibus_writereg_t axe_miibus_writereg;
|
|
static miibus_statchg_t axe_miibus_statchg;
|
|
|
|
static uether_fn_t axe_attach_post;
|
|
static uether_fn_t axe_init;
|
|
static uether_fn_t axe_stop;
|
|
static uether_fn_t axe_start;
|
|
static uether_fn_t axe_tick;
|
|
static uether_fn_t axe_setmulti;
|
|
static uether_fn_t axe_setpromisc;
|
|
|
|
static int axe_attach_post_sub(struct usb_ether *);
|
|
static int axe_ifmedia_upd(struct ifnet *);
|
|
static void axe_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
static int axe_cmd(struct axe_softc *, int, int, int, void *);
|
|
static void axe_ax88178_init(struct axe_softc *);
|
|
static void axe_ax88772_init(struct axe_softc *);
|
|
static void axe_ax88772_phywake(struct axe_softc *);
|
|
static void axe_ax88772a_init(struct axe_softc *);
|
|
static void axe_ax88772b_init(struct axe_softc *);
|
|
static int axe_get_phyno(struct axe_softc *, int);
|
|
static int axe_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static int axe_rx_frame(struct usb_ether *, struct usb_page_cache *, int);
|
|
static int axe_rxeof(struct usb_ether *, struct usb_page_cache *,
|
|
unsigned int offset, unsigned int, struct axe_csum_hdr *);
|
|
static void axe_csum_cfg(struct usb_ether *);
|
|
|
|
static const struct usb_config axe_config[AXE_N_TRANSFER] = {
|
|
|
|
[AXE_BULK_DT_WR] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_OUT,
|
|
.frames = 16,
|
|
.bufsize = 16 * MCLBYTES,
|
|
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
|
|
.callback = axe_bulk_write_callback,
|
|
.timeout = 10000, /* 10 seconds */
|
|
},
|
|
|
|
[AXE_BULK_DT_RD] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = 16384, /* bytes */
|
|
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
|
|
.callback = axe_bulk_read_callback,
|
|
.timeout = 0, /* no timeout */
|
|
},
|
|
};
|
|
|
|
static const struct ax88772b_mfb ax88772b_mfb_table[] = {
|
|
{ 0x8000, 0x8001, 2048 },
|
|
{ 0x8100, 0x8147, 4096},
|
|
{ 0x8200, 0x81EB, 6144},
|
|
{ 0x8300, 0x83D7, 8192},
|
|
{ 0x8400, 0x851E, 16384},
|
|
{ 0x8500, 0x8666, 20480},
|
|
{ 0x8600, 0x87AE, 24576},
|
|
{ 0x8700, 0x8A3D, 32768}
|
|
};
|
|
|
|
static device_method_t axe_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, axe_probe),
|
|
DEVMETHOD(device_attach, axe_attach),
|
|
DEVMETHOD(device_detach, axe_detach),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, axe_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, axe_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, axe_miibus_statchg),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t axe_driver = {
|
|
.name = "axe",
|
|
.methods = axe_methods,
|
|
.size = sizeof(struct axe_softc),
|
|
};
|
|
|
|
static devclass_t axe_devclass;
|
|
|
|
DRIVER_MODULE(axe, uhub, axe_driver, axe_devclass, NULL, 0);
|
|
DRIVER_MODULE(miibus, axe, miibus_driver, miibus_devclass, 0, 0);
|
|
MODULE_DEPEND(axe, uether, 1, 1, 1);
|
|
MODULE_DEPEND(axe, usb, 1, 1, 1);
|
|
MODULE_DEPEND(axe, ether, 1, 1, 1);
|
|
MODULE_DEPEND(axe, miibus, 1, 1, 1);
|
|
MODULE_VERSION(axe, 1);
|
|
|
|
static const struct usb_ether_methods axe_ue_methods = {
|
|
.ue_attach_post = axe_attach_post,
|
|
.ue_attach_post_sub = axe_attach_post_sub,
|
|
.ue_start = axe_start,
|
|
.ue_init = axe_init,
|
|
.ue_stop = axe_stop,
|
|
.ue_tick = axe_tick,
|
|
.ue_setmulti = axe_setmulti,
|
|
.ue_setpromisc = axe_setpromisc,
|
|
.ue_mii_upd = axe_ifmedia_upd,
|
|
.ue_mii_sts = axe_ifmedia_sts,
|
|
};
|
|
|
|
static int
|
|
axe_cmd(struct axe_softc *sc, int cmd, int index, int val, void *buf)
|
|
{
|
|
struct usb_device_request req;
|
|
usb_error_t err;
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
req.bmRequestType = (AXE_CMD_IS_WRITE(cmd) ?
|
|
UT_WRITE_VENDOR_DEVICE :
|
|
UT_READ_VENDOR_DEVICE);
|
|
req.bRequest = AXE_CMD_CMD(cmd);
|
|
USETW(req.wValue, val);
|
|
USETW(req.wIndex, index);
|
|
USETW(req.wLength, AXE_CMD_LEN(cmd));
|
|
|
|
err = uether_do_request(&sc->sc_ue, &req, buf, 1000);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
axe_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct axe_softc *sc = device_get_softc(dev);
|
|
uint16_t val;
|
|
int locked;
|
|
|
|
locked = mtx_owned(&sc->sc_mtx);
|
|
if (!locked)
|
|
AXE_LOCK(sc);
|
|
|
|
axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL);
|
|
axe_cmd(sc, AXE_CMD_MII_READ_REG, reg, phy, &val);
|
|
axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL);
|
|
|
|
val = le16toh(val);
|
|
if (AXE_IS_772(sc) && reg == MII_BMSR) {
|
|
/*
|
|
* BMSR of AX88772 indicates that it supports extended
|
|
* capability but the extended status register is
|
|
* revered for embedded ethernet PHY. So clear the
|
|
* extended capability bit of BMSR.
|
|
*/
|
|
val &= ~BMSR_EXTCAP;
|
|
}
|
|
|
|
if (!locked)
|
|
AXE_UNLOCK(sc);
|
|
return (val);
|
|
}
|
|
|
|
static int
|
|
axe_miibus_writereg(device_t dev, int phy, int reg, int val)
|
|
{
|
|
struct axe_softc *sc = device_get_softc(dev);
|
|
int locked;
|
|
|
|
val = htole32(val);
|
|
locked = mtx_owned(&sc->sc_mtx);
|
|
if (!locked)
|
|
AXE_LOCK(sc);
|
|
|
|
axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL);
|
|
axe_cmd(sc, AXE_CMD_MII_WRITE_REG, reg, phy, &val);
|
|
axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL);
|
|
|
|
if (!locked)
|
|
AXE_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
axe_miibus_statchg(device_t dev)
|
|
{
|
|
struct axe_softc *sc = device_get_softc(dev);
|
|
struct mii_data *mii = GET_MII(sc);
|
|
struct ifnet *ifp;
|
|
uint16_t val;
|
|
int err, locked;
|
|
|
|
locked = mtx_owned(&sc->sc_mtx);
|
|
if (!locked)
|
|
AXE_LOCK(sc);
|
|
|
|
ifp = uether_getifp(&sc->sc_ue);
|
|
if (mii == NULL || ifp == NULL ||
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
goto done;
|
|
|
|
sc->sc_flags &= ~AXE_FLAG_LINK;
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
case IFM_100_TX:
|
|
sc->sc_flags |= AXE_FLAG_LINK;
|
|
break;
|
|
case IFM_1000_T:
|
|
if ((sc->sc_flags & AXE_FLAG_178) == 0)
|
|
break;
|
|
sc->sc_flags |= AXE_FLAG_LINK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Lost link, do nothing. */
|
|
if ((sc->sc_flags & AXE_FLAG_LINK) == 0)
|
|
goto done;
|
|
|
|
val = 0;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
|
|
val |= AXE_MEDIA_FULL_DUPLEX;
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
if ((IFM_OPTIONS(mii->mii_media_active) &
|
|
IFM_ETH_TXPAUSE) != 0)
|
|
val |= AXE_178_MEDIA_TXFLOW_CONTROL_EN;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) &
|
|
IFM_ETH_RXPAUSE) != 0)
|
|
val |= AXE_178_MEDIA_RXFLOW_CONTROL_EN;
|
|
}
|
|
}
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
val |= AXE_178_MEDIA_RX_EN | AXE_178_MEDIA_MAGIC;
|
|
if ((sc->sc_flags & AXE_FLAG_178) != 0)
|
|
val |= AXE_178_MEDIA_ENCK;
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_1000_T:
|
|
val |= AXE_178_MEDIA_GMII | AXE_178_MEDIA_ENCK;
|
|
break;
|
|
case IFM_100_TX:
|
|
val |= AXE_178_MEDIA_100TX;
|
|
break;
|
|
case IFM_10_T:
|
|
/* doesn't need to be handled */
|
|
break;
|
|
}
|
|
}
|
|
err = axe_cmd(sc, AXE_CMD_WRITE_MEDIA, 0, val, NULL);
|
|
if (err)
|
|
device_printf(dev, "media change failed, error %d\n", err);
|
|
done:
|
|
if (!locked)
|
|
AXE_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
axe_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct axe_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii = GET_MII(sc);
|
|
struct mii_softc *miisc;
|
|
int error;
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
PHY_RESET(miisc);
|
|
error = mii_mediachg(mii);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
axe_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct axe_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii = GET_MII(sc);
|
|
|
|
AXE_LOCK(sc);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
AXE_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
axe_setmulti(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
struct ifnet *ifp = uether_getifp(ue);
|
|
struct ifmultiaddr *ifma;
|
|
uint32_t h = 0;
|
|
uint16_t rxmode;
|
|
uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, &rxmode);
|
|
rxmode = le16toh(rxmode);
|
|
|
|
if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
|
|
rxmode |= AXE_RXCMD_ALLMULTI;
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL);
|
|
return;
|
|
}
|
|
rxmode &= ~AXE_RXCMD_ALLMULTI;
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link)
|
|
{
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
|
|
hashtbl[h / 8] |= 1 << (h % 8);
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
axe_cmd(sc, AXE_CMD_WRITE_MCAST, 0, 0, (void *)&hashtbl);
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL);
|
|
}
|
|
|
|
static int
|
|
axe_get_phyno(struct axe_softc *sc, int sel)
|
|
{
|
|
int phyno;
|
|
|
|
switch (AXE_PHY_TYPE(sc->sc_phyaddrs[sel])) {
|
|
case PHY_TYPE_100_HOME:
|
|
case PHY_TYPE_GIG:
|
|
phyno = AXE_PHY_NO(sc->sc_phyaddrs[sel]);
|
|
break;
|
|
case PHY_TYPE_SPECIAL:
|
|
/* FALLTHROUGH */
|
|
case PHY_TYPE_RSVD:
|
|
/* FALLTHROUGH */
|
|
case PHY_TYPE_NON_SUP:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
phyno = -1;
|
|
break;
|
|
}
|
|
|
|
return (phyno);
|
|
}
|
|
|
|
#define AXE_GPIO_WRITE(x, y) do { \
|
|
axe_cmd(sc, AXE_CMD_WRITE_GPIO, 0, (x), NULL); \
|
|
uether_pause(ue, (y)); \
|
|
} while (0)
|
|
|
|
static void
|
|
axe_ax88178_init(struct axe_softc *sc)
|
|
{
|
|
struct usb_ether *ue;
|
|
int gpio0, ledmode, phymode;
|
|
uint16_t eeprom, val;
|
|
|
|
ue = &sc->sc_ue;
|
|
axe_cmd(sc, AXE_CMD_SROM_WR_ENABLE, 0, 0, NULL);
|
|
/* XXX magic */
|
|
axe_cmd(sc, AXE_CMD_SROM_READ, 0, 0x0017, &eeprom);
|
|
eeprom = le16toh(eeprom);
|
|
axe_cmd(sc, AXE_CMD_SROM_WR_DISABLE, 0, 0, NULL);
|
|
|
|
/* if EEPROM is invalid we have to use to GPIO0 */
|
|
if (eeprom == 0xffff) {
|
|
phymode = AXE_PHY_MODE_MARVELL;
|
|
gpio0 = 1;
|
|
ledmode = 0;
|
|
} else {
|
|
phymode = eeprom & 0x7f;
|
|
gpio0 = (eeprom & 0x80) ? 0 : 1;
|
|
ledmode = eeprom >> 8;
|
|
}
|
|
|
|
if (bootverbose)
|
|
device_printf(sc->sc_ue.ue_dev,
|
|
"EEPROM data : 0x%04x, phymode : 0x%02x\n", eeprom,
|
|
phymode);
|
|
/* Program GPIOs depending on PHY hardware. */
|
|
switch (phymode) {
|
|
case AXE_PHY_MODE_MARVELL:
|
|
if (gpio0 == 1) {
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO0_EN,
|
|
hz / 32);
|
|
AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2 | AXE_GPIO2_EN,
|
|
hz / 32);
|
|
AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2_EN, hz / 4);
|
|
AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2 | AXE_GPIO2_EN,
|
|
hz / 32);
|
|
} else {
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 |
|
|
AXE_GPIO1_EN, hz / 3);
|
|
if (ledmode == 1) {
|
|
AXE_GPIO_WRITE(AXE_GPIO1_EN, hz / 3);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN,
|
|
hz / 3);
|
|
} else {
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN |
|
|
AXE_GPIO2 | AXE_GPIO2_EN, hz / 32);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN |
|
|
AXE_GPIO2_EN, hz / 4);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN |
|
|
AXE_GPIO2 | AXE_GPIO2_EN, hz / 32);
|
|
}
|
|
}
|
|
break;
|
|
case AXE_PHY_MODE_CICADA:
|
|
case AXE_PHY_MODE_CICADA_V2:
|
|
case AXE_PHY_MODE_CICADA_V2_ASIX:
|
|
if (gpio0 == 1)
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO0 |
|
|
AXE_GPIO0_EN, hz / 32);
|
|
else
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 |
|
|
AXE_GPIO1_EN, hz / 32);
|
|
break;
|
|
case AXE_PHY_MODE_AGERE:
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 |
|
|
AXE_GPIO1_EN, hz / 32);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2 |
|
|
AXE_GPIO2_EN, hz / 32);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2_EN, hz / 4);
|
|
AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2 |
|
|
AXE_GPIO2_EN, hz / 32);
|
|
break;
|
|
case AXE_PHY_MODE_REALTEK_8211CL:
|
|
case AXE_PHY_MODE_REALTEK_8211BN:
|
|
case AXE_PHY_MODE_REALTEK_8251CL:
|
|
val = gpio0 == 1 ? AXE_GPIO0 | AXE_GPIO0_EN :
|
|
AXE_GPIO1 | AXE_GPIO1_EN;
|
|
AXE_GPIO_WRITE(val, hz / 32);
|
|
AXE_GPIO_WRITE(val | AXE_GPIO2 | AXE_GPIO2_EN, hz / 32);
|
|
AXE_GPIO_WRITE(val | AXE_GPIO2_EN, hz / 4);
|
|
AXE_GPIO_WRITE(val | AXE_GPIO2 | AXE_GPIO2_EN, hz / 32);
|
|
if (phymode == AXE_PHY_MODE_REALTEK_8211CL) {
|
|
axe_miibus_writereg(ue->ue_dev, sc->sc_phyno,
|
|
0x1F, 0x0005);
|
|
axe_miibus_writereg(ue->ue_dev, sc->sc_phyno,
|
|
0x0C, 0x0000);
|
|
val = axe_miibus_readreg(ue->ue_dev, sc->sc_phyno,
|
|
0x0001);
|
|
axe_miibus_writereg(ue->ue_dev, sc->sc_phyno,
|
|
0x01, val | 0x0080);
|
|
axe_miibus_writereg(ue->ue_dev, sc->sc_phyno,
|
|
0x1F, 0x0000);
|
|
}
|
|
break;
|
|
default:
|
|
/* Unknown PHY model or no need to program GPIOs. */
|
|
break;
|
|
}
|
|
|
|
/* soft reset */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_CLEAR, NULL);
|
|
uether_pause(ue, hz / 4);
|
|
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0,
|
|
AXE_SW_RESET_PRL | AXE_178_RESET_MAGIC, NULL);
|
|
uether_pause(ue, hz / 4);
|
|
/* Enable MII/GMII/RGMII interface to work with external PHY. */
|
|
axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 0, NULL);
|
|
uether_pause(ue, hz / 4);
|
|
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
axe_ax88772_init(struct axe_softc *sc)
|
|
{
|
|
axe_cmd(sc, AXE_CMD_WRITE_GPIO, 0, 0x00b0, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 16);
|
|
|
|
if (sc->sc_phyno == AXE_772_PHY_NO_EPHY) {
|
|
/* ask for the embedded PHY */
|
|
axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 0x01, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 64);
|
|
|
|
/* power down and reset state, pin reset state */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0,
|
|
AXE_SW_RESET_CLEAR, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 16);
|
|
|
|
/* power down/reset state, pin operating state */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0,
|
|
AXE_SW_RESET_IPPD | AXE_SW_RESET_PRL, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 4);
|
|
|
|
/* power up, reset */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_PRL, NULL);
|
|
|
|
/* power up, operating */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0,
|
|
AXE_SW_RESET_IPRL | AXE_SW_RESET_PRL, NULL);
|
|
} else {
|
|
/* ask for external PHY */
|
|
axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 0x00, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 64);
|
|
|
|
/* power down internal PHY */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0,
|
|
AXE_SW_RESET_IPPD | AXE_SW_RESET_PRL, NULL);
|
|
}
|
|
|
|
uether_pause(&sc->sc_ue, hz / 4);
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
axe_ax88772_phywake(struct axe_softc *sc)
|
|
{
|
|
struct usb_ether *ue;
|
|
|
|
ue = &sc->sc_ue;
|
|
if (sc->sc_phyno == AXE_772_PHY_NO_EPHY) {
|
|
/* Manually select internal(embedded) PHY - MAC mode. */
|
|
axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, AXE_SW_PHY_SELECT_SS_ENB |
|
|
AXE_SW_PHY_SELECT_EMBEDDED | AXE_SW_PHY_SELECT_SS_MII,
|
|
NULL);
|
|
uether_pause(&sc->sc_ue, hz / 32);
|
|
} else {
|
|
/*
|
|
* Manually select external PHY - MAC mode.
|
|
* Reverse MII/RMII is for AX88772A PHY mode.
|
|
*/
|
|
axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, AXE_SW_PHY_SELECT_SS_ENB |
|
|
AXE_SW_PHY_SELECT_EXT | AXE_SW_PHY_SELECT_SS_MII, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 32);
|
|
}
|
|
/* Take PHY out of power down. */
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPPD |
|
|
AXE_SW_RESET_IPRL, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 4);
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPRL, NULL);
|
|
uether_pause(&sc->sc_ue, hz);
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_CLEAR, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 32);
|
|
axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPRL, NULL);
|
|
uether_pause(&sc->sc_ue, hz / 32);
|
|
}
|
|
|
|
static void
|
|
axe_ax88772a_init(struct axe_softc *sc)
|
|
{
|
|
struct usb_ether *ue;
|
|
|
|
ue = &sc->sc_ue;
|
|
/* Reload EEPROM. */
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM, hz / 32);
|
|
axe_ax88772_phywake(sc);
|
|
/* Stop MAC. */
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
axe_ax88772b_init(struct axe_softc *sc)
|
|
{
|
|
struct usb_ether *ue;
|
|
uint16_t eeprom;
|
|
uint8_t *eaddr;
|
|
int i;
|
|
|
|
ue = &sc->sc_ue;
|
|
/* Reload EEPROM. */
|
|
AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM, hz / 32);
|
|
/*
|
|
* Save PHY power saving configuration(high byte) and
|
|
* clear EEPROM checksum value(low byte).
|
|
*/
|
|
axe_cmd(sc, AXE_CMD_SROM_READ, 0, AXE_EEPROM_772B_PHY_PWRCFG, &eeprom);
|
|
sc->sc_pwrcfg = le16toh(eeprom) & 0xFF00;
|
|
|
|
/*
|
|
* Auto-loaded default station address from internal ROM is
|
|
* 00:00:00:00:00:00 such that an explicit access to EEPROM
|
|
* is required to get real station address.
|
|
*/
|
|
eaddr = ue->ue_eaddr;
|
|
for (i = 0; i < ETHER_ADDR_LEN / 2; i++) {
|
|
axe_cmd(sc, AXE_CMD_SROM_READ, 0, AXE_EEPROM_772B_NODE_ID + i,
|
|
&eeprom);
|
|
eeprom = le16toh(eeprom);
|
|
*eaddr++ = (uint8_t)(eeprom & 0xFF);
|
|
*eaddr++ = (uint8_t)((eeprom >> 8) & 0xFF);
|
|
}
|
|
/* Wakeup PHY. */
|
|
axe_ax88772_phywake(sc);
|
|
/* Stop MAC. */
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL);
|
|
}
|
|
|
|
#undef AXE_GPIO_WRITE
|
|
|
|
static void
|
|
axe_reset(struct axe_softc *sc)
|
|
{
|
|
struct usb_config_descriptor *cd;
|
|
usb_error_t err;
|
|
|
|
cd = usbd_get_config_descriptor(sc->sc_ue.ue_udev);
|
|
|
|
err = usbd_req_set_config(sc->sc_ue.ue_udev, &sc->sc_mtx,
|
|
cd->bConfigurationValue);
|
|
if (err)
|
|
DPRINTF("reset failed (ignored)\n");
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
uether_pause(&sc->sc_ue, hz / 100);
|
|
|
|
/* Reinitialize controller to achieve full reset. */
|
|
if (sc->sc_flags & AXE_FLAG_178)
|
|
axe_ax88178_init(sc);
|
|
else if (sc->sc_flags & AXE_FLAG_772)
|
|
axe_ax88772_init(sc);
|
|
else if (sc->sc_flags & AXE_FLAG_772A)
|
|
axe_ax88772a_init(sc);
|
|
else if (sc->sc_flags & AXE_FLAG_772B)
|
|
axe_ax88772b_init(sc);
|
|
}
|
|
|
|
static void
|
|
axe_attach_post(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
|
|
/*
|
|
* Load PHY indexes first. Needed by axe_xxx_init().
|
|
*/
|
|
axe_cmd(sc, AXE_CMD_READ_PHYID, 0, 0, sc->sc_phyaddrs);
|
|
if (bootverbose)
|
|
device_printf(sc->sc_ue.ue_dev, "PHYADDR 0x%02x:0x%02x\n",
|
|
sc->sc_phyaddrs[0], sc->sc_phyaddrs[1]);
|
|
sc->sc_phyno = axe_get_phyno(sc, AXE_PHY_SEL_PRI);
|
|
if (sc->sc_phyno == -1)
|
|
sc->sc_phyno = axe_get_phyno(sc, AXE_PHY_SEL_SEC);
|
|
if (sc->sc_phyno == -1) {
|
|
device_printf(sc->sc_ue.ue_dev,
|
|
"no valid PHY address found, assuming PHY address 0\n");
|
|
sc->sc_phyno = 0;
|
|
}
|
|
|
|
/* Initialize controller and get station address. */
|
|
if (sc->sc_flags & AXE_FLAG_178) {
|
|
axe_ax88178_init(sc);
|
|
axe_cmd(sc, AXE_178_CMD_READ_NODEID, 0, 0, ue->ue_eaddr);
|
|
} else if (sc->sc_flags & AXE_FLAG_772) {
|
|
axe_ax88772_init(sc);
|
|
axe_cmd(sc, AXE_178_CMD_READ_NODEID, 0, 0, ue->ue_eaddr);
|
|
} else if (sc->sc_flags & AXE_FLAG_772A) {
|
|
axe_ax88772a_init(sc);
|
|
axe_cmd(sc, AXE_178_CMD_READ_NODEID, 0, 0, ue->ue_eaddr);
|
|
} else if (sc->sc_flags & AXE_FLAG_772B) {
|
|
axe_ax88772b_init(sc);
|
|
} else
|
|
axe_cmd(sc, AXE_172_CMD_READ_NODEID, 0, 0, ue->ue_eaddr);
|
|
|
|
/*
|
|
* Fetch IPG values.
|
|
*/
|
|
if (sc->sc_flags & (AXE_FLAG_772A | AXE_FLAG_772B)) {
|
|
/* Set IPG values. */
|
|
sc->sc_ipgs[0] = 0x15;
|
|
sc->sc_ipgs[1] = 0x16;
|
|
sc->sc_ipgs[2] = 0x1A;
|
|
} else
|
|
axe_cmd(sc, AXE_CMD_READ_IPG012, 0, 0, sc->sc_ipgs);
|
|
}
|
|
|
|
static int
|
|
axe_attach_post_sub(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int adv_pause;
|
|
int error;
|
|
|
|
sc = uether_getsc(ue);
|
|
ifp = ue->ue_ifp;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_start = uether_start;
|
|
ifp->if_ioctl = axe_ioctl;
|
|
ifp->if_init = uether_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
|
|
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
if (AXE_IS_178_FAMILY(sc))
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU;
|
|
if (sc->sc_flags & AXE_FLAG_772B) {
|
|
ifp->if_capabilities |= IFCAP_TXCSUM | IFCAP_RXCSUM;
|
|
ifp->if_hwassist = AXE_CSUM_FEATURES;
|
|
/*
|
|
* Checksum offloading of AX88772B also works with VLAN
|
|
* tagged frames but there is no way to take advantage
|
|
* of the feature because vlan(4) assumes
|
|
* IFCAP_VLAN_HWTAGGING is prerequisite condition to
|
|
* support checksum offloading with VLAN. VLAN hardware
|
|
* tagging support of AX88772B is very limited so it's
|
|
* not possible to announce IFCAP_VLAN_HWTAGGING.
|
|
*/
|
|
}
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
if (sc->sc_flags & (AXE_FLAG_772A | AXE_FLAG_772B | AXE_FLAG_178))
|
|
adv_pause = MIIF_DOPAUSE;
|
|
else
|
|
adv_pause = 0;
|
|
mtx_lock(&Giant);
|
|
error = mii_attach(ue->ue_dev, &ue->ue_miibus, ifp,
|
|
uether_ifmedia_upd, ue->ue_methods->ue_mii_sts,
|
|
BMSR_DEFCAPMASK, sc->sc_phyno, MII_OFFSET_ANY, adv_pause);
|
|
mtx_unlock(&Giant);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Probe for a AX88172 chip.
|
|
*/
|
|
static int
|
|
axe_probe(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
|
|
if (uaa->usb_mode != USB_MODE_HOST)
|
|
return (ENXIO);
|
|
if (uaa->info.bConfigIndex != AXE_CONFIG_IDX)
|
|
return (ENXIO);
|
|
if (uaa->info.bIfaceIndex != AXE_IFACE_IDX)
|
|
return (ENXIO);
|
|
|
|
return (usbd_lookup_id_by_uaa(axe_devs, sizeof(axe_devs), uaa));
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
axe_attach(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
struct axe_softc *sc = device_get_softc(dev);
|
|
struct usb_ether *ue = &sc->sc_ue;
|
|
uint8_t iface_index;
|
|
int error;
|
|
|
|
sc->sc_flags = USB_GET_DRIVER_INFO(uaa);
|
|
|
|
device_set_usb_desc(dev);
|
|
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
|
|
|
|
iface_index = AXE_IFACE_IDX;
|
|
error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer,
|
|
axe_config, AXE_N_TRANSFER, sc, &sc->sc_mtx);
|
|
if (error) {
|
|
device_printf(dev, "allocating USB transfers failed\n");
|
|
goto detach;
|
|
}
|
|
|
|
ue->ue_sc = sc;
|
|
ue->ue_dev = dev;
|
|
ue->ue_udev = uaa->device;
|
|
ue->ue_mtx = &sc->sc_mtx;
|
|
ue->ue_methods = &axe_ue_methods;
|
|
|
|
error = uether_ifattach(ue);
|
|
if (error) {
|
|
device_printf(dev, "could not attach interface\n");
|
|
goto detach;
|
|
}
|
|
return (0); /* success */
|
|
|
|
detach:
|
|
axe_detach(dev);
|
|
return (ENXIO); /* failure */
|
|
}
|
|
|
|
static int
|
|
axe_detach(device_t dev)
|
|
{
|
|
struct axe_softc *sc = device_get_softc(dev);
|
|
struct usb_ether *ue = &sc->sc_ue;
|
|
|
|
usbd_transfer_unsetup(sc->sc_xfer, AXE_N_TRANSFER);
|
|
uether_ifdetach(ue);
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if (AXE_BULK_BUF_SIZE >= 0x10000)
|
|
#error "Please update axe_bulk_read_callback()!"
|
|
#endif
|
|
|
|
static void
|
|
axe_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct axe_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_ether *ue = &sc->sc_ue;
|
|
struct usb_page_cache *pc;
|
|
int actlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
axe_rx_frame(ue, pc, actlen);
|
|
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
uether_rxflush(ue);
|
|
return;
|
|
|
|
default: /* Error */
|
|
DPRINTF("bulk read error, %s\n", usbd_errstr(error));
|
|
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
|
|
}
|
|
}
|
|
|
|
static int
|
|
axe_rx_frame(struct usb_ether *ue, struct usb_page_cache *pc, int actlen)
|
|
{
|
|
struct axe_softc *sc;
|
|
struct axe_sframe_hdr hdr;
|
|
struct axe_csum_hdr csum_hdr;
|
|
int error, len, pos;
|
|
|
|
sc = uether_getsc(ue);
|
|
pos = 0;
|
|
len = 0;
|
|
error = 0;
|
|
if ((sc->sc_flags & AXE_FLAG_STD_FRAME) != 0) {
|
|
while (pos < actlen) {
|
|
if ((int)(pos + sizeof(hdr)) > actlen) {
|
|
/* too little data */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
usbd_copy_out(pc, pos, &hdr, sizeof(hdr));
|
|
|
|
if ((hdr.len ^ hdr.ilen) != sc->sc_lenmask) {
|
|
/* we lost sync */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
pos += sizeof(hdr);
|
|
len = le16toh(hdr.len);
|
|
if (pos + len > actlen) {
|
|
/* invalid length */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
axe_rxeof(ue, pc, pos, len, NULL);
|
|
pos += len + (len % 2);
|
|
}
|
|
} else if ((sc->sc_flags & AXE_FLAG_CSUM_FRAME) != 0) {
|
|
while (pos < actlen) {
|
|
if ((int)(pos + sizeof(csum_hdr)) > actlen) {
|
|
/* too little data */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
usbd_copy_out(pc, pos, &csum_hdr, sizeof(csum_hdr));
|
|
|
|
csum_hdr.len = le16toh(csum_hdr.len);
|
|
csum_hdr.ilen = le16toh(csum_hdr.ilen);
|
|
csum_hdr.cstatus = le16toh(csum_hdr.cstatus);
|
|
if ((AXE_CSUM_RXBYTES(csum_hdr.len) ^
|
|
AXE_CSUM_RXBYTES(csum_hdr.ilen)) !=
|
|
sc->sc_lenmask) {
|
|
/* we lost sync */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
/*
|
|
* Get total transferred frame length including
|
|
* checksum header. The length should be multiple
|
|
* of 4.
|
|
*/
|
|
len = sizeof(csum_hdr) + AXE_CSUM_RXBYTES(csum_hdr.len);
|
|
len = (len + 3) & ~3;
|
|
if (pos + len > actlen) {
|
|
/* invalid length */
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
axe_rxeof(ue, pc, pos + sizeof(csum_hdr),
|
|
AXE_CSUM_RXBYTES(csum_hdr.len), &csum_hdr);
|
|
pos += len;
|
|
}
|
|
} else
|
|
axe_rxeof(ue, pc, 0, actlen, NULL);
|
|
|
|
if (error != 0)
|
|
ue->ue_ifp->if_ierrors++;
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
axe_rxeof(struct usb_ether *ue, struct usb_page_cache *pc, unsigned int offset,
|
|
unsigned int len, struct axe_csum_hdr *csum_hdr)
|
|
{
|
|
struct ifnet *ifp = ue->ue_ifp;
|
|
struct mbuf *m;
|
|
|
|
if (len < ETHER_HDR_LEN || len > MCLBYTES - ETHER_ALIGN) {
|
|
ifp->if_ierrors++;
|
|
return (EINVAL);
|
|
}
|
|
|
|
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL) {
|
|
ifp->if_iqdrops++;
|
|
return (ENOMEM);
|
|
}
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
m_adj(m, ETHER_ALIGN);
|
|
|
|
usbd_copy_out(pc, offset, mtod(m, uint8_t *), len);
|
|
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = len;
|
|
|
|
if (csum_hdr != NULL && csum_hdr->cstatus & AXE_CSUM_HDR_L3_TYPE_IPV4) {
|
|
if ((csum_hdr->cstatus & (AXE_CSUM_HDR_L4_CSUM_ERR |
|
|
AXE_CSUM_HDR_L3_CSUM_ERR)) == 0) {
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED |
|
|
CSUM_IP_VALID;
|
|
if ((csum_hdr->cstatus & AXE_CSUM_HDR_L4_TYPE_MASK) ==
|
|
AXE_CSUM_HDR_L4_TYPE_TCP ||
|
|
(csum_hdr->cstatus & AXE_CSUM_HDR_L4_TYPE_MASK) ==
|
|
AXE_CSUM_HDR_L4_TYPE_UDP) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
}
|
|
|
|
_IF_ENQUEUE(&ue->ue_rxq, m);
|
|
return (0);
|
|
}
|
|
|
|
#if ((AXE_BULK_BUF_SIZE >= 0x10000) || (AXE_BULK_BUF_SIZE < (MCLBYTES+4)))
|
|
#error "Please update axe_bulk_write_callback()!"
|
|
#endif
|
|
|
|
static void
|
|
axe_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct axe_softc *sc = usbd_xfer_softc(xfer);
|
|
struct axe_sframe_hdr hdr;
|
|
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
|
|
struct usb_page_cache *pc;
|
|
struct mbuf *m;
|
|
int nframes, pos;
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
DPRINTFN(11, "transfer complete\n");
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
if ((sc->sc_flags & AXE_FLAG_LINK) == 0 ||
|
|
(ifp->if_drv_flags & IFF_DRV_OACTIVE) != 0) {
|
|
/*
|
|
* Don't send anything if there is no link or
|
|
* controller is busy.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
for (nframes = 0; nframes < 16 &&
|
|
!IFQ_DRV_IS_EMPTY(&ifp->if_snd); nframes++) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
|
|
if (m == NULL)
|
|
break;
|
|
usbd_xfer_set_frame_offset(xfer, nframes * MCLBYTES,
|
|
nframes);
|
|
pos = 0;
|
|
pc = usbd_xfer_get_frame(xfer, nframes);
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
hdr.len = htole16(m->m_pkthdr.len);
|
|
hdr.ilen = ~hdr.len;
|
|
/*
|
|
* If upper stack computed checksum, driver
|
|
* should tell controller not to insert
|
|
* computed checksum for checksum offloading
|
|
* enabled controller.
|
|
*/
|
|
if (ifp->if_capabilities & IFCAP_TXCSUM) {
|
|
if ((m->m_pkthdr.csum_flags &
|
|
AXE_CSUM_FEATURES) != 0)
|
|
hdr.len |= htole16(
|
|
AXE_TX_CSUM_PSEUDO_HDR);
|
|
else
|
|
hdr.len |= htole16(
|
|
AXE_TX_CSUM_DIS);
|
|
}
|
|
usbd_copy_in(pc, pos, &hdr, sizeof(hdr));
|
|
pos += sizeof(hdr);
|
|
usbd_m_copy_in(pc, pos, m, 0, m->m_pkthdr.len);
|
|
pos += m->m_pkthdr.len;
|
|
if ((pos % 512) == 0) {
|
|
hdr.len = 0;
|
|
hdr.ilen = 0xffff;
|
|
usbd_copy_in(pc, pos, &hdr,
|
|
sizeof(hdr));
|
|
pos += sizeof(hdr);
|
|
}
|
|
} else {
|
|
usbd_m_copy_in(pc, pos, m, 0, m->m_pkthdr.len);
|
|
pos += m->m_pkthdr.len;
|
|
}
|
|
|
|
/*
|
|
* XXX
|
|
* Update TX packet counter here. This is not
|
|
* correct way but it seems that there is no way
|
|
* to know how many packets are sent at the end
|
|
* of transfer because controller combines
|
|
* multiple writes into single one if there is
|
|
* room in TX buffer of controller.
|
|
*/
|
|
ifp->if_opackets++;
|
|
|
|
/*
|
|
* if there's a BPF listener, bounce a copy
|
|
* of this frame to him:
|
|
*/
|
|
BPF_MTAP(ifp, m);
|
|
|
|
m_freem(m);
|
|
|
|
/* Set frame length. */
|
|
usbd_xfer_set_frame_len(xfer, nframes, pos);
|
|
}
|
|
if (nframes != 0) {
|
|
usbd_xfer_set_frames(xfer, nframes);
|
|
usbd_transfer_submit(xfer);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
}
|
|
return;
|
|
/* NOTREACHED */
|
|
default: /* Error */
|
|
DPRINTFN(11, "transfer error, %s\n",
|
|
usbd_errstr(error));
|
|
|
|
ifp->if_oerrors++;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
|
|
}
|
|
}
|
|
|
|
static void
|
|
axe_tick(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
struct mii_data *mii = GET_MII(sc);
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
mii_tick(mii);
|
|
if ((sc->sc_flags & AXE_FLAG_LINK) == 0) {
|
|
axe_miibus_statchg(ue->ue_dev);
|
|
if ((sc->sc_flags & AXE_FLAG_LINK) != 0)
|
|
axe_start(ue);
|
|
}
|
|
}
|
|
|
|
static void
|
|
axe_start(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
|
|
/*
|
|
* start the USB transfers, if not already started:
|
|
*/
|
|
usbd_transfer_start(sc->sc_xfer[AXE_BULK_DT_RD]);
|
|
usbd_transfer_start(sc->sc_xfer[AXE_BULK_DT_WR]);
|
|
}
|
|
|
|
static void
|
|
axe_csum_cfg(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint16_t csum1, csum2;
|
|
|
|
sc = uether_getsc(ue);
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
if ((sc->sc_flags & AXE_FLAG_772B) != 0) {
|
|
ifp = uether_getifp(ue);
|
|
csum1 = 0;
|
|
csum2 = 0;
|
|
if ((ifp->if_capenable & IFCAP_TXCSUM) != 0)
|
|
csum1 |= AXE_TXCSUM_IP | AXE_TXCSUM_TCP |
|
|
AXE_TXCSUM_UDP;
|
|
axe_cmd(sc, AXE_772B_CMD_WRITE_TXCSUM, csum2, csum1, NULL);
|
|
csum1 = 0;
|
|
csum2 = 0;
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
|
|
csum1 |= AXE_RXCSUM_IP | AXE_RXCSUM_IPVE |
|
|
AXE_RXCSUM_TCP | AXE_RXCSUM_UDP | AXE_RXCSUM_ICMP |
|
|
AXE_RXCSUM_IGMP;
|
|
axe_cmd(sc, AXE_772B_CMD_WRITE_RXCSUM, csum2, csum1, NULL);
|
|
}
|
|
}
|
|
|
|
static void
|
|
axe_init(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
struct ifnet *ifp = uether_getifp(ue);
|
|
uint16_t rxmode;
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
return;
|
|
|
|
/* Cancel pending I/O */
|
|
axe_stop(ue);
|
|
|
|
axe_reset(sc);
|
|
|
|
/* Set MAC address and transmitter IPG values. */
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
axe_cmd(sc, AXE_178_CMD_WRITE_NODEID, 0, 0, IF_LLADDR(ifp));
|
|
axe_cmd(sc, AXE_178_CMD_WRITE_IPG012, sc->sc_ipgs[2],
|
|
(sc->sc_ipgs[1] << 8) | (sc->sc_ipgs[0]), NULL);
|
|
} else {
|
|
axe_cmd(sc, AXE_172_CMD_WRITE_NODEID, 0, 0, IF_LLADDR(ifp));
|
|
axe_cmd(sc, AXE_172_CMD_WRITE_IPG0, 0, sc->sc_ipgs[0], NULL);
|
|
axe_cmd(sc, AXE_172_CMD_WRITE_IPG1, 0, sc->sc_ipgs[1], NULL);
|
|
axe_cmd(sc, AXE_172_CMD_WRITE_IPG2, 0, sc->sc_ipgs[2], NULL);
|
|
}
|
|
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
sc->sc_flags &= ~(AXE_FLAG_STD_FRAME | AXE_FLAG_CSUM_FRAME);
|
|
if ((sc->sc_flags & AXE_FLAG_772B) != 0 &&
|
|
(ifp->if_capenable & IFCAP_RXCSUM) != 0) {
|
|
sc->sc_lenmask = AXE_CSUM_HDR_LEN_MASK;
|
|
sc->sc_flags |= AXE_FLAG_CSUM_FRAME;
|
|
} else {
|
|
sc->sc_lenmask = AXE_HDR_LEN_MASK;
|
|
sc->sc_flags |= AXE_FLAG_STD_FRAME;
|
|
}
|
|
}
|
|
|
|
/* Configure TX/RX checksum offloading. */
|
|
axe_csum_cfg(ue);
|
|
|
|
if (sc->sc_flags & AXE_FLAG_772B) {
|
|
/* AX88772B uses different maximum frame burst configuration. */
|
|
axe_cmd(sc, AXE_772B_CMD_RXCTL_WRITE_CFG,
|
|
ax88772b_mfb_table[AX88772B_MFB_16K].threshold,
|
|
ax88772b_mfb_table[AX88772B_MFB_16K].byte_cnt, NULL);
|
|
}
|
|
|
|
/* Enable receiver, set RX mode. */
|
|
rxmode = (AXE_RXCMD_MULTICAST | AXE_RXCMD_ENABLE);
|
|
if (AXE_IS_178_FAMILY(sc)) {
|
|
if (sc->sc_flags & AXE_FLAG_772B) {
|
|
/*
|
|
* Select RX header format type 1. Aligning IP
|
|
* header on 4 byte boundary is not needed when
|
|
* checksum offloading feature is not used
|
|
* because we always copy the received frame in
|
|
* RX handler. When RX checksum offloading is
|
|
* active, aligning IP header is required to
|
|
* reflect actual frame length including RX
|
|
* header size.
|
|
*/
|
|
rxmode |= AXE_772B_RXCMD_HDR_TYPE_1;
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
|
|
rxmode |= AXE_772B_RXCMD_IPHDR_ALIGN;
|
|
} else {
|
|
/*
|
|
* Default Rx buffer size is too small to get
|
|
* maximum performance.
|
|
*/
|
|
rxmode |= AXE_178_RXCMD_MFB_16384;
|
|
}
|
|
} else {
|
|
rxmode |= AXE_172_RXCMD_UNICAST;
|
|
}
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
rxmode |= AXE_RXCMD_PROMISC;
|
|
|
|
if (ifp->if_flags & IFF_BROADCAST)
|
|
rxmode |= AXE_RXCMD_BROADCAST;
|
|
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL);
|
|
|
|
/* Load the multicast filter. */
|
|
axe_setmulti(ue);
|
|
|
|
usbd_xfer_set_stall(sc->sc_xfer[AXE_BULK_DT_WR]);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
/* Switch to selected media. */
|
|
axe_ifmedia_upd(ifp);
|
|
}
|
|
|
|
static void
|
|
axe_setpromisc(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
struct ifnet *ifp = uether_getifp(ue);
|
|
uint16_t rxmode;
|
|
|
|
axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, &rxmode);
|
|
|
|
rxmode = le16toh(rxmode);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
rxmode |= AXE_RXCMD_PROMISC;
|
|
} else {
|
|
rxmode &= ~AXE_RXCMD_PROMISC;
|
|
}
|
|
|
|
axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL);
|
|
|
|
axe_setmulti(ue);
|
|
}
|
|
|
|
static void
|
|
axe_stop(struct usb_ether *ue)
|
|
{
|
|
struct axe_softc *sc = uether_getsc(ue);
|
|
struct ifnet *ifp = uether_getifp(ue);
|
|
|
|
AXE_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
sc->sc_flags &= ~AXE_FLAG_LINK;
|
|
|
|
/*
|
|
* stop all the transfers, if not already stopped:
|
|
*/
|
|
usbd_transfer_stop(sc->sc_xfer[AXE_BULK_DT_WR]);
|
|
usbd_transfer_stop(sc->sc_xfer[AXE_BULK_DT_RD]);
|
|
}
|
|
|
|
static int
|
|
axe_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct usb_ether *ue = ifp->if_softc;
|
|
struct axe_softc *sc;
|
|
struct ifreq *ifr;
|
|
int error, mask, reinit;
|
|
|
|
sc = uether_getsc(ue);
|
|
ifr = (struct ifreq *)data;
|
|
error = 0;
|
|
reinit = 0;
|
|
if (cmd == SIOCSIFCAP) {
|
|
AXE_LOCK(sc);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
if ((mask & IFCAP_TXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_TXCSUM) != 0) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if ((ifp->if_capenable & IFCAP_TXCSUM) != 0)
|
|
ifp->if_hwassist |= AXE_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist &= ~AXE_CSUM_FEATURES;
|
|
reinit++;
|
|
}
|
|
if ((mask & IFCAP_RXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_RXCSUM) != 0) {
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
reinit++;
|
|
}
|
|
if (reinit > 0 && ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
else
|
|
reinit = 0;
|
|
AXE_UNLOCK(sc);
|
|
if (reinit > 0)
|
|
uether_init(ue);
|
|
} else
|
|
error = uether_ioctl(ifp, cmd, data);
|
|
|
|
return (error);
|
|
}
|