freebsd-dev/sys/dev
Justin T. Gibbs c27eebfde8 aic7xxx.c:
Correct the BUILD_TCL macro.  It was placing the target id
	in the wrong bits.  This was only an issue for adapters that
	do not perform SCB paging (aha-3940AUW for instance).

	Don't bother inlining ahc_index_busy_tcl.  It is never
	used in a performance critical path and is a bit chunky.

	Correct ahc_index_busy_tcl to deal with "busy target tables"
	embedded in the latter half of 64byte SCBs.

	Don't initialize the busy target table to its empty state
	until after we have finished extracting configuration
	information from chip SRAM.  In the common case of using
	16 bytes of chip SRAM to do untagged target lookups,
	we were trashing the last 8 targets configuration data.
	(actually only target 8 because of the bug in the
	BUILD_TCL macro).

	Cram the "bus reset delivered" message back under bootverbose.

	Fix the cleanup of the SCB busy target table when aborting
	commands.  If the lun is wildcarded, we must loop through
	all possible luns.

aic7xxx.h:
	Only bother supporting 64 luns right now.  It doesn't seem
	like either this driver or any peripherals will be doing
	information unit transfers (where the lun number is a
	32 bit integer) any time soon.

aic7xxx.seq:
	Fix support for the aic7895.  We must flush the data
	FIFO if performing a manual transfer that is not
	a multiple of 8 bytes.  We were doing this quite
	regularly for embedded cdbs.

	Manaually flush the fifo on earlier adapters when
	dealing with embedded cdbs too.  We were stuffing
	the FIFO with 16 bytes instead, but triggering
	the flush is more efficient and allows us to
	remove two instructions from the "copy_to_fifo"
	routine.
2000-07-24 22:27:40 +00:00
..
advansys Fix typo (accessable --> accessible). 2000-06-14 17:53:40 +00:00
agp Add support for Intel's i810 chipset with integrated graphics. An 2000-07-12 10:13:07 +00:00
aha Fix typo (accessable --> accessible). 2000-06-14 17:53:40 +00:00
ahb Fix typo (accessable --> accessible). 2000-06-14 17:53:40 +00:00
aic Terminate aic_ids[] 2000-06-19 22:16:14 +00:00
aic7xxx aic7xxx.c: 2000-07-24 22:27:40 +00:00
amd Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
amr The AMI MegaRAID's internal memory map conflicts with scatter/gather 2000-06-10 19:22:39 +00:00
an Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
ar Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
ata Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. 2000-07-04 11:25:35 +00:00
atkbdc This is yet another attempt to fix "psmintr out of sync.." problems. 2000-07-22 04:08:12 +00:00
awi Remove the awi(4) manual page from the sys/ hierarchy after a repo- 2000-07-23 09:40:39 +00:00
bktr Update to driver 2.14. Adds new Tuner types for Hauppauge WinTV cards 2000-06-28 15:09:12 +00:00
buslogic Fix typo (accessable --> accessible). 2000-06-14 17:53:40 +00:00
cardbus Sync to latest cardbusdevs file 1999-11-18 07:22:59 +00:00
ccd Move the truncation code out of vn_open and into the open system call 2000-07-04 03:34:11 +00:00
cs Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
cy Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
dc Add the PCI IDs for the Macronix 98727 and 98732 parts. These are 2000-07-17 19:27:41 +00:00
de Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
dec Add missing $FreeBSD$ 2000-05-01 19:54:26 +00:00
dgb Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
dpt Use correct register values. This one was in aic7xxx and advansys too. 2000-05-28 15:50:40 +00:00
ed MFPAO: Add support for AX88190, equipped in MELCO LPC3-TX. 2000-07-23 15:15:43 +00:00
eisa Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
en Ahhrggg. Put the test for the compat shims AFTER the file that includes 2000-03-27 20:24:02 +00:00
ep Properly detect ISA cards in EISA mode and skip them in the ISA identify 2000-07-18 06:37:08 +00:00
ex Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
fb Unused include: #include "fb.h" 2000-06-10 06:41:11 +00:00
fdc Step down a level and issue format requests with a struct bio instead 2000-05-06 07:01:47 +00:00
fe Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
fxp Fix an alpha-only race which causes the transmit side of the chip to 2000-07-19 14:33:52 +00:00
hea Remove un-needed #include's. 2000-01-17 20:49:59 +00:00
hfa Ensure that DMA mappings are freed in error situations. 2000-01-15 21:01:04 +00:00
ic Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
ida Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
ie Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
iicbus Allow these drivers to be detached. 2000-06-16 07:20:29 +00:00
isp Add in some new IN_XXX and CT_XXXX flags in preparation 2000-07-18 07:06:47 +00:00
ispfw Roll back target mode f/w to 7.55- 7.65 hangs when presented with a 2000-07-17 00:34:52 +00:00
joy Add ADS7182 as a known Joystick. 2000-01-18 08:38:35 +00:00
kbd Manipulate with AltGR Led (really CapsLock Led) only in K_XLATE mode, because 2000-05-28 12:43:24 +00:00
lmc Adjust to accomodate recent changes to the rcvdata and rcvmsg 2000-05-01 03:31:58 +00:00
lnc Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
mc146818 Add missing $FreeBSD$ 2000-05-01 19:54:26 +00:00
mca Set the RF_SHAREABLE flage when we allocate an IRQ. 2000-03-13 11:43:53 +00:00
mcd Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
md Rename MDNSECT to MD_NSECT and declare it as something that isn't 2000-07-17 13:13:04 +00:00
mii Added Altima Communications OUI and their AC101 10/100 2000-06-21 19:26:01 +00:00
mlx Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
mse - `Newbus'ified the driver. 2000-03-18 15:13:30 +00:00
musycc Add transmit buffer limitation depending on actual bandwidth. 2000-07-22 17:08:52 +00:00
null Small style change; make function names less likely to clash with 2000-07-09 12:29:24 +00:00
nulldev Small style change; make function names less likely to clash with 2000-07-09 12:29:24 +00:00
pccard Matching commits to pccard for last pcic changes. We now at least to 2000-06-18 05:28:59 +00:00
pcf Remove ~25 unneeded #include <sys/conf.h> 2000-04-19 14:58:28 +00:00
pci Nuke the useless chip driver. It gets in the way when you want to load 2000-06-09 16:00:29 +00:00
pcic Almost make loading work. This is a checkpoint. With these change we 2000-06-18 05:25:30 +00:00
pdq Uh, ya, sure this almost compiled for __bsdi__. NOT! 2000-05-21 05:33:40 +00:00
ppbus Remove an unused variable warning. 2000-07-18 20:16:36 +00:00
ppc Add support for the PC87303 chipset (found on Miata alphas) and add 2000-07-20 09:28:07 +00:00
random Clean this up with some BDE-inspired fixes. 2000-07-23 11:08:16 +00:00
randomdev Clean this up with some BDE-inspired fixes. 2000-07-23 11:08:16 +00:00
ray Add attribute memory setup warnings 2000-07-11 21:31:59 +00:00
rc Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
rp - Eliminate rpread(). Call generic ttyread(). (cf rev 1.33) 2000-06-12 15:21:59 +00:00
scd Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
sf Close PR# 19904: remember to call sf_setmulti() when initializing the 2000-07-14 19:11:02 +00:00
si Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really* 2000-01-25 16:45:54 +00:00
sio Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. 2000-07-04 11:25:35 +00:00
sk Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
smbus Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
sn Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
snp Unstaticize this driver. You can have as many snoop devices as you can 2000-04-02 00:35:37 +00:00
sound make this file suitable for 4-stable as well as 5-current 2000-07-18 21:23:48 +00:00
speaker Add PnP probe methods to some common AT hardware drivers. In each case, 2000-06-23 07:44:33 +00:00
sr Mass update of isa drivers using compatability shims to use 2000-05-28 13:40:48 +00:00
streams Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
sym - Various comment fixes and additions. 2000-07-02 21:26:50 +00:00
syscons Make Reset (ESC c) reset attributes too, not only clear screen 2000-07-21 14:26:31 +00:00
tdfx Studied the tech docs for the Voodoo3 and Banshee, and hopefully fixed the 2000-07-19 05:41:14 +00:00
ti Tweak probe message so that 1000baseSX and 1000baseT cards are 2000-07-20 23:43:45 +00:00
twe Remove some confusing verbosity - we have no idea what RAID level the 2000-07-20 02:31:56 +00:00
tx Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
usb The modem driver for Communication Device Class, ACM compliant devices. 2000-07-17 19:28:29 +00:00
vinum start_object: Set the revive length correctly. 2000-06-07 03:34:18 +00:00
vn Add snapshots to the fast filesystem. Most of the changes support 2000-07-11 22:07:57 +00:00
vr Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
vx Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
wi Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
wl Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
xe Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00