freebsd-dev/sys/mips/include/pte.h
Pedro F. Giffuni 19d3b47b92 sys/mips: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:07:26 +00:00

210 lines
7.9 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2004-2010 Juli Mallett <jmallett@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_PTE_H_
#define _MACHINE_PTE_H_
#ifndef _LOCORE
#if defined(__mips_n64) || defined(__mips_n32) /* PHYSADDR_64_BIT */
typedef uint64_t pt_entry_t;
#else
typedef uint32_t pt_entry_t;
#endif
typedef pt_entry_t *pd_entry_t;
#endif
/*
* TLB and PTE management. Most things operate within the context of
* EntryLo0,1, and begin with TLBLO_. Things which work with EntryHi
* start with TLBHI_. PTE bits begin with PTE_.
*
* Note that we use the same size VM and TLB pages.
*/
#define TLB_PAGE_SHIFT (PAGE_SHIFT)
#define TLB_PAGE_SIZE (1 << TLB_PAGE_SHIFT)
#define TLB_PAGE_MASK (TLB_PAGE_SIZE - 1)
/*
* TLB PageMask register. Has mask bits set above the default, 4K, page mask.
*/
#define TLBMASK_SHIFT (13)
#define TLBMASK_MASK ((PAGE_MASK >> TLBMASK_SHIFT) << TLBMASK_SHIFT)
/*
* FreeBSD/mips page-table entries take a near-identical format to MIPS TLB
* entries, each consisting of two 32-bit or 64-bit values ("EntryHi" and
* "EntryLo"). MIPS4k and MIPS64 both define certain bits in TLB entries as
* reserved, and these must be zero-filled by software. We overload these
* bits in PTE entries to hold PTE_ flags such as RO, W, and MANAGED.
* However, we must mask these out when writing to TLB entries to ensure that
* they do not become visible to hardware -- especially on MIPS64r2 which has
* an extended physical memory space.
*
* When using n64 and n32, shift software-defined bits into the MIPS64r2
* reserved range, which runs from bit 55 ... 63. In other configurations
* (32-bit MIPS4k and compatible), shift them out to bits 29 ... 31.
*
* NOTE: This means that for 32-bit use of CP0, we aren't able to set the top
* bit of PFN to a non-zero value, as software is using it! This physical
* memory size limit may not be sufficiently enforced elsewhere.
*/
#if defined(__mips_n64) || defined(__mips_n32) /* PHYSADDR_64_BIT */
#define TLBLO_SWBITS_SHIFT (55)
#define TLBLO_SWBITS_CLEAR_SHIFT (9)
#define TLBLO_PFN_MASK 0x3FFFFFFC0ULL
#else
#define TLBLO_SWBITS_SHIFT (29)
#define TLBLO_SWBITS_CLEAR_SHIFT (3)
#define TLBLO_PFN_MASK (0x1FFFFFC0)
#endif
#define TLBLO_PFN_SHIFT (6)
#define TLBLO_SWBITS_MASK ((pt_entry_t)0x7 << TLBLO_SWBITS_SHIFT)
#define TLBLO_PA_TO_PFN(pa) ((((pa) >> TLB_PAGE_SHIFT) << TLBLO_PFN_SHIFT) & TLBLO_PFN_MASK)
#define TLBLO_PFN_TO_PA(pfn) ((vm_paddr_t)((pfn) >> TLBLO_PFN_SHIFT) << TLB_PAGE_SHIFT)
#define TLBLO_PTE_TO_PFN(pte) ((pte) & TLBLO_PFN_MASK)
#define TLBLO_PTE_TO_PA(pte) (TLBLO_PFN_TO_PA(TLBLO_PTE_TO_PFN((pte))))
/*
* XXX This comment is not correct for anything more modern than R4K.
*
* VPN for EntryHi register. Upper two bits select user, supervisor,
* or kernel. Bits 61 to 40 copy bit 63. VPN2 is bits 39 and down to
* as low as 13, down to PAGE_SHIFT, to index 2 TLB pages*. From bit 12
* to bit 8 there is a 5-bit 0 field. Low byte is ASID.
*
* XXX This comment is not correct for FreeBSD.
* Note that in FreeBSD, we map 2 TLB pages is equal to 1 VM page.
*/
#define TLBHI_ASID_MASK (0xff)
#if defined(__mips_n64)
#define TLBHI_R_SHIFT 62
#define TLBHI_R_USER (0x00UL << TLBHI_R_SHIFT)
#define TLBHI_R_SUPERVISOR (0x01UL << TLBHI_R_SHIFT)
#define TLBHI_R_KERNEL (0x03UL << TLBHI_R_SHIFT)
#define TLBHI_R_MASK (0x03UL << TLBHI_R_SHIFT)
#define TLBHI_VA_R(va) ((va) & TLBHI_R_MASK)
#define TLBHI_FILL_SHIFT 40
#define TLBHI_VPN2_SHIFT (TLB_PAGE_SHIFT + 1)
#define TLBHI_VPN2_MASK (((~((1UL << TLBHI_VPN2_SHIFT) - 1)) << (63 - TLBHI_FILL_SHIFT)) >> (63 - TLBHI_FILL_SHIFT))
#define TLBHI_VA_TO_VPN2(va) ((va) & TLBHI_VPN2_MASK)
#define TLBHI_ENTRY(va, asid) ((TLBHI_VA_R((va))) /* Region. */ | \
(TLBHI_VA_TO_VPN2((va))) /* VPN2. */ | \
((asid) & TLBHI_ASID_MASK))
#else /* !defined(__mips_n64) */
#define TLBHI_PAGE_MASK (2 * PAGE_SIZE - 1)
#define TLBHI_ENTRY(va, asid) (((va) & ~TLBHI_PAGE_MASK) | ((asid) & TLBHI_ASID_MASK))
#endif /* defined(__mips_n64) */
/*
* TLB flags managed in hardware:
* C: Cache attribute.
* D: Dirty bit. This means a page is writable. It is not
* set at first, and a write is trapped, and the dirty
* bit is set. See also PTE_RO.
* V: Valid bit. Obvious, isn't it?
* G: Global bit. This means that this mapping is present
* in EVERY address space, and to ignore the ASID when
* it is matched.
*/
#define PTE_C(attr) ((attr & 0x07) << 3)
#define PTE_C_MASK (PTE_C(0x07))
#define PTE_C_UNCACHED (PTE_C(MIPS_CCA_UNCACHED))
#define PTE_C_CACHE (PTE_C(MIPS_CCA_CACHED))
#define PTE_C_WC (PTE_C(MIPS_CCA_WC))
#define PTE_D 0x04
#define PTE_V 0x02
#define PTE_G 0x01
/*
* VM flags managed in software:
* RO: Read only. Never set PTE_D on this page, and don't
* listen to requests to write to it.
* W: Wired. ???
* MANAGED:Managed. This PTE maps a managed page.
*
* These bits should not be written into the TLB, so must first be masked out
* explicitly in C, or using CLEAR_PTE_SWBITS() in assembly.
*/
#define PTE_RO ((pt_entry_t)0x01 << TLBLO_SWBITS_SHIFT)
#define PTE_W ((pt_entry_t)0x02 << TLBLO_SWBITS_SHIFT)
#define PTE_MANAGED ((pt_entry_t)0x04 << TLBLO_SWBITS_SHIFT)
/*
* PTE management functions for bits defined above.
*/
#define pte_clear(pte, bit) (*(pte) &= ~(bit))
#define pte_set(pte, bit) (*(pte) |= (bit))
#define pte_test(pte, bit) ((*(pte) & (bit)) == (bit))
#define pte_cache_bits(pte) ((*(pte) >> 3) & 0x07)
/* Assembly support for PTE access*/
#ifdef LOCORE
#if defined(__mips_n64) || defined(__mips_n32) /* PHYSADDR_64_BIT */
#define PTESHIFT 3
#define PTE2MASK 0xff0 /* for the 2-page lo0/lo1 */
#define PTEMASK 0xff8
#define PTESIZE 8
#define PTE_L ld
#define PTE_MTC0 dmtc0
#define CLEAR_PTE_SWBITS(pr)
#else
#define PTESHIFT 2
#define PTE2MASK 0xff8 /* for the 2-page lo0/lo1 */
#define PTEMASK 0xffc
#define PTESIZE 4
#define PTE_L lw
#define PTE_MTC0 mtc0
#define CLEAR_PTE_SWBITS(r) LONG_SLL r, TLBLO_SWBITS_CLEAR_SHIFT; LONG_SRL r, TLBLO_SWBITS_CLEAR_SHIFT /* remove swbits */
#endif /* defined(__mips_n64) || defined(__mips_n32) */
#if defined(__mips_n64)
#define PTRSHIFT 3
#define PDEPTRMASK 0xff8
#else
#define PTRSHIFT 2
#define PDEPTRMASK 0xffc
#endif
#endif /* LOCORE */
/* PageMask Register (CP0 Register 5, Select 0) Values */
#define MIPS3_PGMASK_MASKX 0x00001800
#define MIPS3_PGMASK_4K 0x00000000
#define MIPS3_PGMASK_16K 0x00006000
#define MIPS3_PGMASK_64K 0x0001e000
#define MIPS3_PGMASK_256K 0x0007e000
#define MIPS3_PGMASK_1M 0x001fe000
#define MIPS3_PGMASK_4M 0x007fe000
#define MIPS3_PGMASK_16M 0x01ffe000
#define MIPS3_PGMASK_64M 0x07ffe000
#define MIPS3_PGMASK_256M 0x1fffe000
#endif /* !_MACHINE_PTE_H_ */