94 lines
3.2 KiB
Plaintext
94 lines
3.2 KiB
Plaintext
|
|
HARP and FORE Systems Microcode
|
|
===============================
|
|
|
|
ATM adapters from FORE Systems use Intel i960 embedded processors and
|
|
require that application software (herein called "microcode") be downloaded
|
|
and executed on the adapter. The interface between the microcode and the host
|
|
device driver is specified in the FORE ATM Adaptation Layer Interface (AALI)
|
|
(available from ftp.fore.com:/pub/docs/port). HARP uses microcode supplied
|
|
by FORE Systems. The HARP device driver for the FORE adapter (hfa) conforms
|
|
to the AALI specification.
|
|
|
|
As part of the HARP ATM initialization procedure, the HARP 'fore_dnld' utility
|
|
must be invoked in order to load the microcode file into each FORE adapter.
|
|
However, the microcode file is NOT included in the FreeBSD distribution. It is
|
|
the user's responsibility to obtain and install the FORE microcode file. Below
|
|
are notes to assist users in finding and installing microcode known to work
|
|
with HARP.
|
|
|
|
FORE microcode files can be obtained from either FORE's web site
|
|
(http://www.fore.com) or the CD distributed with new FORE adapters.
|
|
When using FORE's web site, you must have a valid login to access the
|
|
TACtics Online section of the site. The software download section is
|
|
available via the 'Services & Support'->'TACtics Online'->Software links.
|
|
|
|
If you are currently using HARP and already have a working microcode file,
|
|
that microcode will continue to work with this release of HARP.
|
|
|
|
|
|
PCA200E
|
|
-------
|
|
|
|
From the FORE web pages, the following PCA200E adapter distributions
|
|
are known to have microcode which will work with HARP:
|
|
|
|
pc_adapter->OS/2->archive->os2_4.0.2_1.20.200.zip
|
|
unzip the file and execute the command:
|
|
|
|
cp -p <unzip_directory>/Drivers/PCA200E.BIN /etc/pca200e.bin
|
|
|
|
pc_adapter->'Windows NT'->archive->pca2e_12.zip
|
|
unzip the file and execute the command:
|
|
|
|
cp -p <unzip_directory>/NT/I386/PCA200E.BIN /etc/pca200e.bin
|
|
|
|
|
|
The following distributions from the FORE web pages are known to have
|
|
microcode which will NOT work with HARP:
|
|
|
|
pc_adapter:
|
|
OS/2:
|
|
release:
|
|
os2_4.1.0_1.74.zip
|
|
Windows95:
|
|
archive:
|
|
pc-w95_5.0.0.16432.zip
|
|
win95_4.0.3_1.04.200.zip
|
|
win95_4.1.6_1.16.zip
|
|
release:
|
|
pc-w95_4.1.6_27.zip
|
|
Windows NT:
|
|
archive:
|
|
pc-nt_5.0.0_16342.zip
|
|
winnt_4.0.3_1.05.200.zip
|
|
winnt_4.1.2_1.27.zip
|
|
winnt_4.1.6_1.16.zip
|
|
release:
|
|
pc-nt_4.1.6_27.zip
|
|
pc-nt_i386_5.0.0_25096.zip
|
|
|
|
|
|
From the "ForeRunner 200E for PC/Mac" distribution CD-ROM, the following
|
|
PCA200E adapter distributions are known to have microcode which will work
|
|
with HARP (assuming the CD-ROM is mounted on /cdrom):
|
|
|
|
/cdrom/rel4.0/os2/
|
|
execute the command:
|
|
|
|
cp -p /cdrom/rel4.0/os2/drivers/pca200e.bin /etc/pca200e.bin
|
|
|
|
|
|
Note: Windows-based files are supplied in a compressed form. If the
|
|
'fore_dnld' command complains about an unrecognized header format, you should
|
|
try to uncompress the microcode file. To do so, move the file in binary mode
|
|
to a DOS/Windows machine and use the DOS command 'expand' to uncompress the
|
|
file. The command syntax is:
|
|
|
|
expand <in-file> <out-file>
|
|
|
|
Move the resulting <out-file> in binary mode back to the HARP machine as
|
|
/etc/pca200e.bin and try to initialize the ATM system again.
|
|
|
|
@(#) $FreeBSD$
|