freebsd-dev/sys/dev/rtwn/rtl8812a/r12a_fw_cmd.h
Andriy Voskoboinyk 7453645f2a rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes
2016-10-17 20:38:24 +00:00

124 lines
3.6 KiB
C

/*-
* Copyright (c) 2016 Andriy Voskoboinyk <avos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef R12A_FW_CMD_H
#define R12A_FW_CMD_H
#include <dev/rtwn/rtl8188e/r88e_fw_cmd.h>
/*
* Host to firmware commands.
*/
/* Note: some parts are shared with RTL8188EU. */
#define R12A_CMD_MSR_RPT 0x01
#define R12A_CMD_SET_PWRMODE 0x20
#define R12A_CMD_IQ_CALIBRATE 0x45
/* Structure for R12A_CMD_MSR_RPT. */
struct r12a_fw_cmd_msrrpt {
uint8_t msrb0;
#define R12A_MSRRPT_B0_DISASSOC 0x00
#define R12A_MSRRPT_B0_ASSOC 0x01
#define R12A_MSRRPT_B0_MACID_IND 0x02
uint8_t macid;
uint8_t macid_end;
} __packed;
/* Structure for R12A_CMD_SET_PWRMODE. */
struct r12a_fw_cmd_pwrmode {
uint8_t mode;
uint8_t pwrb1;
uint8_t bcn_pass;
uint8_t queue_uapsd;
uint8_t pwr_state;
uint8_t pwrb5;
#define R12A_PWRMODE_B5_NO_BTCOEX 0x40
} __packed;
/* Structure for R12A_CMD_IQ_CALIBRATE. */
struct r12a_fw_cmd_iq_calib {
uint8_t chan;
uint8_t band_bw;
#define RTWN_CMD_IQ_CHAN_WIDTH_20 0x01
#define RTWN_CMD_IQ_CHAN_WIDTH_40 0x02
#define RTWN_CMD_IQ_CHAN_WIDTH_80 0x04
#define RTWN_CMD_IQ_CHAN_WIDTH_160 0x08
#define RTWN_CMD_IQ_BAND_2GHZ 0x10
#define RTWN_CMD_IQ_BAND_5GHZ 0x20
uint8_t ext_5g_pa_lna;
#define RTWN_CMD_IQ_EXT_PA_5G(pa) (pa)
#define RTWN_CMD_IQ_EXT_LNA_5G(lna) ((lna) << 1)
} __packed;
/*
* C2H event types.
*/
#define R12A_C2H_DEBUG 0x00
#define R12A_C2H_TX_REPORT 0x03
#define R12A_C2H_BT_INFO 0x09
#define R12A_C2H_RA_REPORT 0x0c
#define R12A_C2H_IQK_FINISHED 0x11
/* Structure for R12A_C2H_TX_REPORT event. */
struct r12a_c2h_tx_rpt {
uint8_t txrptb0;
#define R12A_TXRPTB0_QSEL_M 0x1f
#define R12A_TXRPTB0_QSEL_S 0
#define R12A_TXRPTB0_BC 0x20
#define R12A_TXRPTB0_LIFE_EXPIRE 0x40
#define R12A_TXRPTB0_RETRY_OVER 0x80
uint8_t macid;
uint8_t txrptb2;
#define R12A_TXRPTB2_RETRY_CNT_M 0x3f
#define R12A_TXRPTB2_RETRY_CNT_S 0
uint8_t queue_time_low; /* 256 msec unit */
uint8_t queue_time_high;
uint8_t final_rate;
uint16_t reserved;
} __packed;
/* Structure for R12A_C2H_RA_REPORT event. */
struct r12a_c2h_ra_report {
uint8_t rarptb0;
#define R12A_RARPTB0_RATE_M 0x3f
#define R12A_RARPTB0_RATE_S 0
uint8_t macid;
uint8_t rarptb2;
#define R12A_RARPTB0_LDPC 0x01
#define R12A_RARPTB0_TXBF 0x02
#define R12A_RARPTB0_NOISE 0x04
} __packed;
#endif /* R12A_FW_CMD_H */