Adrian Chadd 8d6235fb66 Add in an initial WB225 (AR9485 + AR3012 BT) combo profile. ... This hasn't yet been tested as unfortunately the AR3012 I have doesn't have the "real" firmware on it; it shipped with the cut down HCI firmware that only understands enough to accept a new firmware image. * Linux ath9k (GPIO constants)		2013-06-14 08:18:17 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Set the antenna "config group" field.	2013-06-12 15:18:10 +00:00
ath_rate	I give up - just throw the EWMA update into the normal update_stats()	2013-02-27 04:33:06 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Support sending ATH_ALQ messages with no payload.	2013-05-13 21:17:27 +00:00
if_ath_alq.h	Add ALQ beacon debugging.	2013-05-13 21:18:00 +00:00
if_ath_beacon.c	Be (very) careful about how to add more TX DMA work.	2013-05-18 18:27:53 +00:00
if_ath_beacon.h	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_btcoex.c	Add in an initial WB225 (AR9485 + AR3012 BT) combo profile.	2013-06-14 08:18:17 +00:00
if_ath_btcoex.h	Bring over the initial static bluetooth coexistence configuration	2013-06-07 09:02:02 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_lna_div.c	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_lna_div.h	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_misc.h	Migrate ath(4) to now use if_transmit instead of the legacy if_start	2013-05-26 22:23:39 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx_edma.c	Use a per-RX-queue deferred list, rather than a single deferred list for	2013-04-16 20:21:02 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Enable the use of TDMA on an 802.11n channel (with aggregation disabled,	2013-05-21 18:02:54 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Make sure the holding descriptor and link pointer are both freed during	2013-05-10 10:06:45 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx.c	Shuffle around the cleanup unpause calls a bit.	2013-05-29 01:40:13 +00:00
if_ath_tx.h	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath.c	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00