56a7c4a852
ahc_pci.c: Add detach support. Make use of soft allocated on our behalf by newbus. For PCI devices, disable the mapping type we aren't using for extra protection from rogue code. aic7xxx_93cx6.c: aic7xxx_93cx6.h: Sync perforce IDs. aic7xxx_freebsd.c: Capture the eventhandle returned by EVENTHANDER_REGISTER so we can kill the handler off during detach. Use AHC_* constants instead of hard coded numbers in a few more places. Test PPR option state when deciding to "really" negotiate when the CAM_NEGOTIATE flag is passed in a CCB. Make use of core "ahc_pause_and_flushwork" routine in our timeout handler rather than re-inventing this code. Cleanup all of our resources (really!) in ahc_platform_free(). We should be all set to become a module now. Implement the core ahc_detach() routine shared by all of the FreeBSD front-ends. aic7xxx_freebsd.h: Softc storage for our event handler. Null implementation for the ahc_platform_flushwork() OSM callback. FreeBSD doesn't need this as XPT callbacks are safe from all contexts and are done directly in ahc_done(). aic7xxx_inline.h: Implement new lazy interrupt scheme. To avoid an extra PCI bus read, we first check our completion queues to see if any work has completed. If work is available, we assume that this is the source of the interrupt and skip reading INTSTAT. Any remaining interrupt status will be cleared by a second call to the interrupt handler should the interrupt line still be asserted. This drops the interrupt handler down to a single PCI bus read in the common case of I/O completion. This is the same overhead as in the not so distant past, but the extra sanity of perforning a PCI read after clearing the command complete interrupt and before running the completion queue to avoid missing command complete interrupts added a cycle. aic7xxx.c: During initialization, be sure to initialize all scratch ram locations before they are read to avoid parity errors. In this case, we use a new function, ahc_unbusy_tcl() to initialize the scratch ram busy target table. Replace instances of ahc_index_busy_tcl() used to unbusy a tcl without looking at the old value with ahc_unbusy_tcl(). Modify ahc_sent_msg so that it can find single byte messages. ahc_sent_msg is now used to determine if a transfer negotiation attempt resulted in a bus free. Be more careful in filtering out only the SCSI interrupts of interest in ahc_handle_scsiint. Rearrange interrupt clearing code to ensure that at least one PCI transaction occurrs after hitting CLRSINT1 and writting to CLRINT. CLRSINT1 writes take a bit to take effect, and the re-arrangement provides sufficient delay to ensure the write to CLRINT is effective. The old code might report a spurious interrupt on some "fast" chipsets. export ahc-update_target_msg_request for use by OSM code. If a target does not respond to our ATN request, clear it once we move to a non-message phase. This avoids sending a MSG_NOOP in some later message out phase. Use max lun and max target constants instead of hard-coded values. Use softc storage built into our device_t under FreeBSD. Fix a bug in ahc_free() that caused us to delete resources that were not allocated. Clean up any tstate/lstate info in ahc_free(). Clear the powerdown state in ahc_reset() so that registers can be accessed. Add a preliminary function for pausing the chip and processing any posted work. Add a preliminary suspend and resume functions. aic7xxx.h: Limit the number of supported luns to 64. We don't support information unit transfers, so this is the maximum that makes sense for these chips. Add a new flag AHC_ALL_INTERRUPTS that forces the processing of all interrupt state in a single invokation of ahc_intr(). When the flag is not set, we use the lazy interrupt handling scheme. Add data structures to store controller state while we are suspended. Use constants instead of hard coded values where appropriate. Correct some harmless "unsigned/signed" conflicts. aic7xxx.seq: Only perform the SCSIBUSL fix on ULTRA2 or newer controllers. Older controllers seem to be confused by this. In target mode, ignore PHASEMIS during data phases. This bit seems to be flakey on U160 controllers acting in target mode. aic7xxx_pci.c: Add support for the 29160C CPCI adapter. Add definitions for subvendor ID information available for devices with the "9005" vendor id. We currently use this information to determine if a multi-function device doesn't have the second channel hooked up on a board. Add rudimentary power mode code so we can put the controller into the D0 state. In the future this will be an OSM callback so that in FreeBSD we don't duplicate functionality provided by the PCI code. The powerstate code was added after I'd completed my regression tests on this code. Only capture "left over BIOS state" if the POWRDN setting is not set in HCNTRL. In target mode, don't bother sending incremental CRC data.
454 lines
13 KiB
C
454 lines
13 KiB
C
/*
|
|
* Inline routines shareable across OS platforms.
|
|
*
|
|
* Copyright (c) 1994, 1995, 1996, 1997, 1998, 1999, 2000 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU Public License ("GPL").
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: //depot/src/aic7xxx/aic7xxx_inline.h#12 $
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _AIC7XXX_INLINE_H_
|
|
#define _AIC7XXX_INLINE_H_
|
|
|
|
/************************* Sequencer Execution Control ************************/
|
|
static __inline int sequencer_paused(struct ahc_softc *ahc);
|
|
static __inline void ahc_pause_bug_fix(struct ahc_softc *ahc);
|
|
static __inline void pause_sequencer(struct ahc_softc *ahc);
|
|
static __inline void unpause_sequencer(struct ahc_softc *ahc);
|
|
|
|
/*
|
|
* Work around any chip bugs related to halting sequencer execution.
|
|
* On Ultra2 controllers, we must clear the CIOBUS stretch signal by
|
|
* reading a register that will set this signal and deassert it.
|
|
* Without this workaround, if the chip is paused, by an interrupt or
|
|
* manual pause while accessing scb ram, accesses to certain registers
|
|
* will hang the system (infinite pci retries).
|
|
*/
|
|
static __inline void
|
|
ahc_pause_bug_fix(struct ahc_softc *ahc)
|
|
{
|
|
if ((ahc->features & AHC_ULTRA2) != 0)
|
|
(void)ahc_inb(ahc, CCSCBCTL);
|
|
}
|
|
|
|
/*
|
|
* Determine whether the sequencer has halted code execution.
|
|
* Returns non-zero status if the sequencer is stopped.
|
|
*/
|
|
static __inline int
|
|
sequencer_paused(struct ahc_softc *ahc)
|
|
{
|
|
return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
|
|
}
|
|
|
|
/*
|
|
* Request that the sequencer stop and wait, indefinitely, for it
|
|
* to stop. The sequencer will only acknowledge that it is paused
|
|
* once it has reached an instruction boundary and PAUSEDIS is
|
|
* cleared in the SEQCTL register. The sequencer may use PAUSEDIS
|
|
* for critical sections.
|
|
*/
|
|
static __inline void
|
|
pause_sequencer(struct ahc_softc *ahc)
|
|
{
|
|
ahc_outb(ahc, HCNTRL, ahc->pause);
|
|
|
|
/*
|
|
* Since the sequencer can disable pausing in a critical section, we
|
|
* must loop until it actually stops.
|
|
*/
|
|
while (sequencer_paused(ahc) == 0)
|
|
;
|
|
|
|
ahc_pause_bug_fix(ahc);
|
|
}
|
|
|
|
/*
|
|
* Allow the sequencer to continue program execution.
|
|
* We check here to ensure that no additional interrupt
|
|
* sources that would cause the sequencer to halt have been
|
|
* asserted. If, for example, a SCSI bus reset is detected
|
|
* while we are fielding a different, pausing, interrupt type,
|
|
* we don't want to release the sequencer before going back
|
|
* into our interrupt handler and dealing with this new
|
|
* condition.
|
|
*/
|
|
static __inline void
|
|
unpause_sequencer(struct ahc_softc *ahc)
|
|
{
|
|
if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
|
|
ahc_outb(ahc, HCNTRL, ahc->unpause);
|
|
}
|
|
|
|
/*********************** Untagged Transaction Routines ************************/
|
|
static __inline void ahc_freeze_untagged_queues(struct ahc_softc *ahc);
|
|
static __inline void ahc_release_untagged_queues(struct ahc_softc *ahc);
|
|
|
|
/*
|
|
* Block our completion routine from starting the next untagged
|
|
* transaction for this target or target lun.
|
|
*/
|
|
static __inline void
|
|
ahc_freeze_untagged_queues(struct ahc_softc *ahc)
|
|
{
|
|
if ((ahc->features & AHC_SCB_BTT) == 0)
|
|
ahc->untagged_queue_lock++;
|
|
}
|
|
|
|
/*
|
|
* Allow the next untagged transaction for this target or target lun
|
|
* to be executed. We use a counting semaphore to allow the lock
|
|
* to be acquired recursively. Once the count drops to zero, the
|
|
* transaction queues will be run.
|
|
*/
|
|
static __inline void
|
|
ahc_release_untagged_queues(struct ahc_softc *ahc)
|
|
{
|
|
if ((ahc->features & AHC_SCB_BTT) == 0) {
|
|
ahc->untagged_queue_lock--;
|
|
if (ahc->untagged_queue_lock == 0)
|
|
ahc_run_untagged_queues(ahc);
|
|
}
|
|
}
|
|
|
|
/************************** Memory mapping routines ***************************/
|
|
static __inline struct ahc_dma_seg *
|
|
ahc_sg_bus_to_virt(struct scb *scb,
|
|
uint32_t sg_busaddr);
|
|
static __inline uint32_t
|
|
ahc_sg_virt_to_bus(struct scb *scb,
|
|
struct ahc_dma_seg *sg);
|
|
static __inline uint32_t
|
|
ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index);
|
|
|
|
static __inline struct ahc_dma_seg *
|
|
ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
|
|
{
|
|
int sg_index;
|
|
|
|
sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
|
|
/* sg_list_phys points to entry 1, not 0 */
|
|
sg_index++;
|
|
|
|
return (&scb->sg_list[sg_index]);
|
|
}
|
|
|
|
static __inline uint32_t
|
|
ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
|
|
{
|
|
int sg_index;
|
|
|
|
/* sg_list_phys points to entry 1, not 0 */
|
|
sg_index = sg - &scb->sg_list[1];
|
|
|
|
return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
|
|
}
|
|
|
|
static __inline uint32_t
|
|
ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
|
|
{
|
|
return (ahc->scb_data->hscb_busaddr
|
|
+ (sizeof(struct hardware_scb) * index));
|
|
}
|
|
|
|
/******************************** Debugging ***********************************/
|
|
static __inline char *ahc_name(struct ahc_softc *ahc);
|
|
|
|
static __inline char *
|
|
ahc_name(struct ahc_softc *ahc)
|
|
{
|
|
return (ahc->name);
|
|
}
|
|
|
|
/*********************** Miscelaneous Support Functions ***********************/
|
|
|
|
static __inline int ahc_check_residual(struct scb *scb);
|
|
static __inline struct ahc_initiator_tinfo *
|
|
ahc_fetch_transinfo(struct ahc_softc *ahc,
|
|
char channel, u_int our_id,
|
|
u_int remote_id,
|
|
struct tmode_tstate **tstate);
|
|
static __inline struct scb*
|
|
ahc_get_scb(struct ahc_softc *ahc);
|
|
static __inline void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb);
|
|
static __inline void ahc_swap_with_next_hscb(struct ahc_softc *ahc,
|
|
struct scb *scb);
|
|
static __inline void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb);
|
|
|
|
/*
|
|
* Determine whether the sequencer reported a residual
|
|
* for this SCB/transaction.
|
|
*/
|
|
static __inline int
|
|
ahc_check_residual(struct scb *scb)
|
|
{
|
|
struct status_pkt *sp;
|
|
|
|
sp = &scb->hscb->shared_data.status;
|
|
if ((scb->hscb->sgptr & SG_RESID_VALID) != 0)
|
|
return (1);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Return pointers to the transfer negotiation information
|
|
* for the specified our_id/remote_id pair.
|
|
*/
|
|
static __inline struct ahc_initiator_tinfo *
|
|
ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
|
|
u_int remote_id, struct tmode_tstate **tstate)
|
|
{
|
|
/*
|
|
* Transfer data structures are stored from the perspective
|
|
* of the target role. Since the parameters for a connection
|
|
* in the initiator role to a given target are the same as
|
|
* when the roles are reversed, we pretend we are the target.
|
|
*/
|
|
if (channel == 'B')
|
|
our_id += 8;
|
|
*tstate = ahc->enabled_targets[our_id];
|
|
return (&(*tstate)->transinfo[remote_id]);
|
|
}
|
|
|
|
/*
|
|
* Get a free scb. If there are none, see if we can allocate a new SCB.
|
|
*/
|
|
static __inline struct scb *
|
|
ahc_get_scb(struct ahc_softc *ahc)
|
|
{
|
|
struct scb *scb;
|
|
|
|
if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
|
|
ahc_alloc_scbs(ahc);
|
|
scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
|
|
if (scb == NULL)
|
|
return (NULL);
|
|
}
|
|
SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
|
|
return (scb);
|
|
}
|
|
|
|
/*
|
|
* Return an SCB resource to the free list.
|
|
*/
|
|
static __inline void
|
|
ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
|
|
{
|
|
struct hardware_scb *hscb;
|
|
|
|
hscb = scb->hscb;
|
|
/* Clean up for the next user */
|
|
ahc->scb_data->scbindex[hscb->tag] = NULL;
|
|
scb->flags = SCB_FREE;
|
|
hscb->control = 0;
|
|
|
|
SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
|
|
|
|
/* Notify the OSM that a resource is now available. */
|
|
ahc_platform_scb_free(ahc, scb);
|
|
}
|
|
|
|
static __inline struct scb *
|
|
ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
|
|
{
|
|
return (ahc->scb_data->scbindex[tag]);
|
|
|
|
}
|
|
|
|
static __inline void
|
|
ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
|
|
{
|
|
struct hardware_scb *q_hscb;
|
|
u_int saved_tag;
|
|
|
|
/*
|
|
* Our queuing method is a bit tricky. The card
|
|
* knows in advance which HSCB to download, and we
|
|
* can't disappoint it. To achieve this, the next
|
|
* SCB to download is saved off in ahc->next_queued_scb.
|
|
* When we are called to queue "an arbitrary scb",
|
|
* we copy the contents of the incoming HSCB to the one
|
|
* the sequencer knows about, swap HSCB pointers and
|
|
* finally assign the SCB to the tag indexed location
|
|
* in the scb_array. This makes sure that we can still
|
|
* locate the correct SCB by SCB_TAG.
|
|
*/
|
|
q_hscb = ahc->next_queued_scb->hscb;
|
|
saved_tag = q_hscb->tag;
|
|
memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
|
|
if ((scb->flags & SCB_CDB32_PTR) != 0) {
|
|
q_hscb->shared_data.cdb_ptr =
|
|
ahc_hscb_busaddr(ahc, q_hscb->tag)
|
|
+ offsetof(struct hardware_scb, cdb32);
|
|
}
|
|
q_hscb->tag = saved_tag;
|
|
q_hscb->next = scb->hscb->tag;
|
|
|
|
/* Now swap HSCB pointers. */
|
|
ahc->next_queued_scb->hscb = scb->hscb;
|
|
scb->hscb = q_hscb;
|
|
|
|
/* Now define the mapping from tag to SCB in the scbindex */
|
|
ahc->scb_data->scbindex[scb->hscb->tag] = scb;
|
|
}
|
|
|
|
/*
|
|
* Tell the sequencer about a new transaction to execute.
|
|
*/
|
|
static __inline void
|
|
ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
|
|
{
|
|
ahc_swap_with_next_hscb(ahc, scb);
|
|
|
|
if (scb->hscb->tag == SCB_LIST_NULL
|
|
|| scb->hscb->next == SCB_LIST_NULL)
|
|
panic("Attempt to queue invalid SCB tag %x:%x\n",
|
|
scb->hscb->tag, scb->hscb->next);
|
|
|
|
/*
|
|
* Keep a history of SCBs we've downloaded in the qinfifo.
|
|
*/
|
|
ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
|
|
if ((ahc->features & AHC_QUEUE_REGS) != 0) {
|
|
ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
|
|
} else {
|
|
if ((ahc->features & AHC_AUTOPAUSE) == 0)
|
|
pause_sequencer(ahc);
|
|
ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
|
|
if ((ahc->features & AHC_AUTOPAUSE) == 0)
|
|
unpause_sequencer(ahc);
|
|
}
|
|
}
|
|
|
|
/************************** Interrupt Processing ******************************/
|
|
static __inline u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc);
|
|
static __inline void ahc_intr(struct ahc_softc *ahc);
|
|
|
|
/*
|
|
* See if the firmware has posted any completed commands
|
|
* into our in-core command complete fifos.
|
|
*/
|
|
#define AHC_RUN_QOUTFIFO 0x1
|
|
#define AHC_RUN_TQINFIFO 0x2
|
|
static __inline u_int
|
|
ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
|
|
{
|
|
u_int retval;
|
|
|
|
retval = 0;
|
|
if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
|
|
retval |= AHC_RUN_QOUTFIFO;
|
|
#ifdef AHC_TARGET_MODE
|
|
if ((ahc->flags & AHC_TARGETROLE) != 0
|
|
&& ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
|
|
retval |= AHC_RUN_TQINFIFO;
|
|
#endif
|
|
return (retval);
|
|
}
|
|
|
|
/*
|
|
* Catch an interrupt from the adapter
|
|
*/
|
|
static __inline void
|
|
ahc_intr(struct ahc_softc *ahc)
|
|
{
|
|
u_int intstat;
|
|
u_int queuestat;
|
|
|
|
/*
|
|
* Instead of directly reading the interrupt status register,
|
|
* infer the cause of the interrupt by checking our in-core
|
|
* completion queues. This avoids a costly PCI bus read in
|
|
* most cases.
|
|
*/
|
|
intstat = 0;
|
|
if ((queuestat = ahc_check_cmdcmpltqueues(ahc)) != 0)
|
|
intstat = CMDCMPLT;
|
|
|
|
if ((intstat & INT_PEND) == 0
|
|
|| (ahc->flags & AHC_ALL_INTERRUPTS) != 0) {
|
|
|
|
intstat = ahc_inb(ahc, INTSTAT);
|
|
#if AHC_PCI_CONFIG > 0
|
|
if (ahc->unsolicited_ints > 500
|
|
&& (ahc->chip & AHC_PCI) != 0
|
|
&& (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
|
|
ahc_pci_intr(ahc);
|
|
#endif
|
|
}
|
|
|
|
if (intstat == 0xFF)
|
|
/* Hot eject */
|
|
return;
|
|
|
|
if ((intstat & INT_PEND) == 0) {
|
|
ahc->unsolicited_ints++;
|
|
return;
|
|
}
|
|
ahc->unsolicited_ints = 0;
|
|
|
|
if (intstat & CMDCMPLT) {
|
|
ahc_outb(ahc, CLRINT, CLRCMDINT);
|
|
|
|
/*
|
|
* Ensure that the chip sees that we've cleared
|
|
* this interrupt before we walk the output fifo.
|
|
* Otherwise, we may, due to posted bus writes,
|
|
* clear the interrupt after we finish the scan,
|
|
* and after the sequencer has added new entries
|
|
* and asserted the interrupt again.
|
|
*/
|
|
ahc_flush_device_writes(ahc);
|
|
#ifdef AHC_TARGET_MODE
|
|
if ((queuestat & AHC_RUN_QOUTFIFO) != 0)
|
|
#endif
|
|
ahc_run_qoutfifo(ahc);
|
|
#ifdef AHC_TARGET_MODE
|
|
if ((queuestat & AHC_RUN_TQINFIFO) != 0)
|
|
ahc_run_tqinfifo(ahc, /*paused*/FALSE);
|
|
#endif
|
|
}
|
|
if (intstat & BRKADRINT) {
|
|
ahc_handle_brkadrint(ahc);
|
|
/* Fatal error, no more interrupts to handle. */
|
|
return;
|
|
}
|
|
|
|
if ((intstat & (SEQINT|SCSIINT)) != 0)
|
|
ahc_pause_bug_fix(ahc);
|
|
|
|
if ((intstat & SEQINT) != 0)
|
|
ahc_handle_seqint(ahc, intstat);
|
|
|
|
if ((intstat & SCSIINT) != 0)
|
|
ahc_handle_scsiint(ahc, intstat);
|
|
}
|
|
|
|
#endif /* _AIC7XXX_INLINE_H_ */
|