freebsd-dev/sys/pc98/pc98/pc98_machdep.c

/*
 * Copyright (c) KATO Takenori, 1996, 1997.
 *
 * All rights reserved.  Unpublished rights reserved under the copyright
 * laws of Japan.
 *
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer as
 *    the first lines of this file unmodified.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#include "opt_pc98.h"

#include <sys/param.h>
#include <sys/systm.h>

#include <cam/cam.h>
#include <cam/cam_ccb.h>
#ifdef EPSON_MEMWIN
#include <pc98/pc98/pc98.h>
#endif
#include <pc98/pc98/pc98_machdep.h>

/*
 * Initialize DMA controller
 */
void
pc98_init_dmac(void)
{
	outb(0x439, (inb(0x439) & 0xfb));	/* DMA Accsess Control over 1MB */
	outb(0x29, (0x0c | 0));				/* Bank Mode Reg. 16M mode */
	outb(0x29, (0x0c | 1));				/* Bank Mode Reg. 16M mode */
	outb(0x29, (0x0c | 2));				/* Bank Mode Reg. 16M mode */
	outb(0x29, (0x0c | 3));				/* Bank Mode Reg. 16M mode */
	outb(0x11, 0x50);
}

#ifdef EPSON_MEMWIN
/*
 * Disconnect phisical memory in 15-16MB region.
 *
 * EPSON PC-486GR, P, SR, SE, HX, HG and HA only.  Other system support
 * this feature with software DIP switch.
 */
static void
init_epson_memwin(void)
{
	/* Disable 15MB-16MB caching. */
	switch (epson_machine_id) {
	case 0x34:	/* PC486HX */
	case 0x35:	/* PC486HG */
	case 0x3B:	/* PC486HA */
		/* Cache control start. */
		outb(0x43f, 0x42);
		outw(0xc40, 0x0033);

		/* Disable 0xF00000-0xFFFFFF. */
		outb(0xc48, 0x49);
		outb(0xc4c, 0x00);
		outb(0xc48, 0x48);
		outb(0xc4c, 0xf0);
		outb(0xc48, 0x4d);
		outb(0xc4c, 0x00);
		outb(0xc48, 0x4c);
		outb(0xc4c, 0xff);
		outb(0xc48, 0x4f);
		outb(0xc4c, 0x00);

		/* Cache control end. */
		outb(0x43f, 0x40);
		break;

	case 0x2B:	/* PC486GR/GF */
	case 0x30:	/* PC486P */
	case 0x31:	/* PC486GRSuper */
	case 0x32:	/* PC486GR+ */
	case 0x37:	/* PC486SE */
	case 0x38:	/* PC486SR */
		/* Disable 0xF00000-0xFFFFFF. */
		outb(0x43f, 0x42);
		outb(0x467, 0xe0);
		outb(0x567, 0xd8);

		outb(0x43f, 0x40);
		outb(0x467, 0xe0);
		outb(0x567, 0xe0);
		break;
	}

	/* Disable 15MB-16MB RAM and enable memory window. */
	outb(0x43b, inb(0x43b) & 0xfd);	/* Clear bit1. */
}
#endif

/*
 * Get physical memory size
 */
unsigned int
pc98_getmemsize(unsigned int *base, unsigned int *ext)
{
	unsigned int under16, over16;

	/* available conventional memory size */
	*base = ((PC98_SYSTEM_PARAMETER(0x501) & 7) + 1) * 128;

	/* available protected memory size under 16MB */
	under16 = PC98_SYSTEM_PARAMETER(0x401) * 128 + 1024;
#ifdef EPSON_MEMWIN
	if (pc98_machine_type & M_EPSON_PC98) {
		if (under16 > (15 * 1024)) {
			/* chop under16 memory to 15MB */
			under16 = 15 * 1024;
		}
		init_epson_memwin();
	}
#endif

	/* available protected memory size over 16MB / 1MB */
	over16  = PC98_SYSTEM_PARAMETER(0x594);
	over16 += PC98_SYSTEM_PARAMETER(0x595) * 256;

	if (over16 > 0) {
		*ext = (16 + over16) * 1024 - 1024;
	} else {
		*ext = under16 - 1024;
	}

	return under16;
}

/*
 * Read a geometry information of SCSI HDD from BIOS work area.
 *
 * XXX - Before reading BIOS work area, we should check whether
 * host adapter support it.
 */
int
scsi_da_bios_params(struct ccb_calc_geometry *ccg)
{
	u_char *tmp;
	int	target;
	int	bus;

	target = ccg->ccb_h.target_id;
	bus    = 0;  /* If your really need to know, send a PathInq CCB */

	tmp = (u_char *)&PC98_SYSTEM_PARAMETER(0x460 + target*4);
	if ((PC98_SYSTEM_PARAMETER(0x482) & ((1 << target)&0xff)) != 0) {
		ccg->secs_per_track = *tmp;
		ccg->cylinders = ((*(tmp+3)<<8)|*(tmp+2))&0xfff;
#if 0
		switch (*(tmp + 3) & 0x30) {
		case 0x00:
			disk_parms->secsiz = 256;
			printf("Warning!: not supported.\n");
			break;
		case 0x10:
			disk_parms->secsiz = 512;
			break;
		case 0x20:
			disk_parms->secsiz = 1024;
			break;
		default:
			disk_parms->secsiz = 512;
			printf("Warning!: not supported. But force to 512\n");
			break;
		}
#endif
		if (*(tmp+3) & 0x40) {
			ccg->cylinders += (*(tmp+1)&0xf0)<<8;
			ccg->heads = *(tmp+1)&0x0f;
		} else {
			ccg->heads = *(tmp+1);
		}
		return 1;
	}

	return 0;
}