.. |
apb.c
|
AR9330/AR9331 also needs to ACK the APB interrupt register, same as
|
2013-04-05 00:22:53 +00:00 |
apbvar.h
|
|
|
ar71xx_bus_space_reversed.c
|
|
|
ar71xx_bus_space_reversed.h
|
|
|
ar71xx_chip.c
|
Add the reference clock for each supported chip.
|
2013-03-27 03:33:19 +00:00 |
ar71xx_chip.h
|
MII related infrastructure changes.
|
2012-05-02 01:21:57 +00:00 |
ar71xx_cpudef.h
|
Add the reference clock for each supported chip.
|
2013-03-27 03:33:19 +00:00 |
ar71xx_ehci.c
|
Fix AR933x USB support - this needs the same controller initialisation
|
2013-04-05 02:01:05 +00:00 |
ar71xx_fixup.c
|
Introduce the matching PCI ath(4) fixup code from ar71xx_pci into
|
2012-04-20 08:26:05 +00:00 |
ar71xx_fixup.h
|
Introduce the matching PCI ath(4) fixup code from ar71xx_pci into
|
2012-04-20 08:26:05 +00:00 |
ar71xx_gpio.c
|
The GPIO drivers were initialising their mutexes with type of
|
2012-08-17 04:44:57 +00:00 |
ar71xx_gpiovar.h
|
Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.
|
2011-05-06 02:45:02 +00:00 |
ar71xx_machdep.c
|
Print out the platform reference frequency.
|
2013-03-29 06:31:31 +00:00 |
ar71xx_ohci.c
|
Implement better support for USB controller suspend and resume.
|
2011-12-14 00:28:54 +00:00 |
ar71xx_pci_bus_space.c
|
|
|
ar71xx_pci_bus_space.h
|
|
|
ar71xx_pci.c
|
Mips Atheros AR71XX: make PCI base slot configurable through hints.
|
2013-01-06 20:50:31 +00:00 |
ar71xx_setup.c
|
* Add AR9330/AR9331 to the soc identifier enum;
|
2013-04-05 00:22:17 +00:00 |
ar71xx_setup.h
|
* Add AR9330/AR9331 to the soc identifier enum;
|
2013-04-05 00:22:17 +00:00 |
ar71xx_spi.c
|
|
|
ar71xx_wdog.c
|
Preparation work for supporting the AR91xx and AR724x.
|
2010-08-19 02:03:12 +00:00 |
ar71xxreg.h
|
Add a missing newline.
|
2012-05-02 06:17:16 +00:00 |
ar91xx_chip.c
|
Add the reference clock for each supported chip.
|
2013-03-27 03:33:19 +00:00 |
ar91xx_chip.h
|
Add initial Atheros AR91XX support.
|
2010-08-19 11:40:10 +00:00 |
ar91xxreg.h
|
Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.
|
2011-05-06 02:45:02 +00:00 |
ar724x_chip.c
|
Add the reference clock for each supported chip.
|
2013-03-27 03:33:19 +00:00 |
ar724x_chip.h
|
Add some initial AR724X chipset support.
|
2010-08-19 11:53:55 +00:00 |
ar724x_pci.c
|
Ensure that BAR(0) is set for the PCI slot before the ath(4) PCI registers
|
2012-08-26 04:39:20 +00:00 |
ar724xreg.h
|
Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.
|
2011-05-06 02:45:02 +00:00 |
ar933x_chip.c
|
Implement USB device reset and poweron.
|
2013-04-05 02:02:37 +00:00 |
ar933x_chip.h
|
Commit initial (unfinished!) support for the AR933x series of embedded
|
2013-03-27 03:38:58 +00:00 |
ar933x_uart.h
|
* Fix clock register definitions
|
2013-03-29 06:32:02 +00:00 |
ar933xreg.h
|
Implement the AR933x ethernet support.
|
2013-04-05 01:35:59 +00:00 |
files.ar71xx
|
Tie in the AR933x support into -HEAD.
|
2013-03-28 19:30:56 +00:00 |
if_arge.c
|
Implement the AR933x ethernet support.
|
2013-04-05 01:35:59 +00:00 |
if_argevar.h
|
Implement PLL configuration override support, similar to what openwrt
|
2012-05-02 07:43:11 +00:00 |
pcf2123_rtc.c
|
|
|
pcf2123reg.h
|
|
|
std.ar71xx
|
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
|
2012-03-29 02:54:35 +00:00 |
uart_bus_ar71xx.c
|
Preparation work for supporting the AR91xx and AR724x.
|
2010-08-19 02:03:12 +00:00 |
uart_bus_ar933x.c
|
For the AR933x UART, the serial clock is not the AHB clock, it's the
|
2013-03-29 06:32:39 +00:00 |
uart_cpu_ar71xx.c
|
Preparation work for supporting the AR91xx and AR724x.
|
2010-08-19 02:03:12 +00:00 |
uart_cpu_ar933x.c
|
For the AR933x UART, the serial clock is not the AHB clock, it's the
|
2013-03-29 06:32:39 +00:00 |
uart_dev_ar933x.c
|
Implement the AR933x interrupt driven UART code.
|
2013-04-05 00:26:06 +00:00 |
uart_dev_ar933x.h
|
Bring over the initial, CPU-only UART support for the AR933x SoC.
|
2013-03-28 19:27:06 +00:00 |