freebsd-dev/sys/arm/samsung/exynos/exynos5_pad.c
Pedro F. Giffuni 74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00

857 lines
20 KiB
C

/*-
* Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Samsung Exynos 5 Pad Control
* Chapter 4, Exynos 5 Dual User's Manual Public Rev 1.00
*/
#ifdef USB_GLOBAL_INCLUDE_FILE
#include USB_GLOBAL_INCLUDE_FILE
#else
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/malloc.h>
#include <sys/rman.h>
#include <sys/timeet.h>
#include <sys/timetc.h>
#include <sys/watchdog.h>
#include <sys/mutex.h>
#include <sys/gpio.h>
#include <dev/gpio/gpiobusvar.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/intr.h>
#include "gpio_if.h"
#endif
#include <arm/samsung/exynos/exynos5_combiner.h>
#include <arm/samsung/exynos/exynos5_pad.h>
#define GPIO_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define GPIO_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define DEFAULT_CAPS (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT)
#define MAX_PORTS 5
#define MAX_NGPIO 253
#define N_EXT_INTS 16
#define EXYNOS5250 1
#define EXYNOS5420 2
#define PIN_IN 0
#define PIN_OUT 1
#define READ4(_sc, _port, _reg) \
bus_space_read_4(_sc->bst[_port], _sc->bsh[_port], _reg)
#define WRITE4(_sc, _port, _reg, _val) \
bus_space_write_4(_sc->bst[_port], _sc->bsh[_port], _reg, _val)
/*
* GPIO interface
*/
static device_t pad_get_bus(device_t);
static int pad_pin_max(device_t, int *);
static int pad_pin_getcaps(device_t, uint32_t, uint32_t *);
static int pad_pin_getname(device_t, uint32_t, char *);
static int pad_pin_getflags(device_t, uint32_t, uint32_t *);
static int pad_pin_setflags(device_t, uint32_t, uint32_t);
static int pad_pin_set(device_t, uint32_t, unsigned int);
static int pad_pin_get(device_t, uint32_t, unsigned int *);
static int pad_pin_toggle(device_t, uint32_t pin);
struct gpio_bank {
char *name;
uint32_t port;
uint32_t con;
uint32_t ngpio;
uint32_t ext_con;
uint32_t ext_flt_con;
uint32_t mask;
uint32_t pend;
};
struct pad_softc {
struct resource *res[MAX_PORTS * 2];
bus_space_tag_t bst[MAX_PORTS];
bus_space_handle_t bsh[MAX_PORTS];
struct mtx sc_mtx;
int gpio_npins;
struct gpio_pin gpio_pins[MAX_NGPIO];
void *gpio_ih[MAX_PORTS];
device_t dev;
device_t busdev;
int model;
struct resource_spec *pad_spec;
struct gpio_bank *gpio_map;
struct interrupt_entry *interrupt_table;
int nports;
};
struct pad_softc *gpio_sc;
static struct resource_spec pad_spec_5250[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_MEMORY, 1, RF_ACTIVE },
{ SYS_RES_MEMORY, 2, RF_ACTIVE },
{ SYS_RES_MEMORY, 3, RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE },
{ SYS_RES_IRQ, 1, RF_ACTIVE },
{ SYS_RES_IRQ, 2, RF_ACTIVE },
{ SYS_RES_IRQ, 3, RF_ACTIVE },
{ -1, 0 }
};
static struct resource_spec pad_spec_5420[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_MEMORY, 1, RF_ACTIVE },
{ SYS_RES_MEMORY, 2, RF_ACTIVE },
{ SYS_RES_MEMORY, 3, RF_ACTIVE },
{ SYS_RES_MEMORY, 4, RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE },
{ SYS_RES_IRQ, 1, RF_ACTIVE },
{ SYS_RES_IRQ, 2, RF_ACTIVE },
{ SYS_RES_IRQ, 3, RF_ACTIVE },
{ SYS_RES_IRQ, 4, RF_ACTIVE },
{ -1, 0 }
};
static struct ofw_compat_data compat_data[] = {
{"samsung,exynos5420-padctrl", EXYNOS5420},
{"samsung,exynos5250-padctrl", EXYNOS5250},
{NULL, 0}
};
struct pad_intr {
uint32_t enabled;
void (*ih) (void *);
void *ih_user;
};
static struct pad_intr intr_map[MAX_NGPIO];
struct interrupt_entry {
int gpio_number;
char *combiner_source_name;
};
struct interrupt_entry interrupt_table_5250[N_EXT_INTS] = {
{ 147, "EINT[15]" },
{ 146, "EINT[14]" },
{ 145, "EINT[13]" },
{ 144, "EINT[12]" },
{ 143, "EINT[11]" },
{ 142, "EINT[10]" },
{ 141, "EINT[9]" },
{ 140, "EINT[8]" },
{ 139, "EINT[7]" },
{ 138, "EINT[6]" },
{ 137, "EINT[5]" },
{ 136, "EINT[4]" },
{ 135, "EINT[3]" },
{ 134, "EINT[2]" },
{ 133, "EINT[1]" },
{ 132, "EINT[0]" },
};
struct interrupt_entry interrupt_table_5420[N_EXT_INTS] = {
{ 23, "EINT[15]" },
{ 22, "EINT[14]" },
{ 21, "EINT[13]" },
{ 20, "EINT[12]" },
{ 19, "EINT[11]" },
{ 18, "EINT[10]" },
{ 17, "EINT[9]" },
{ 16, "EINT[8]" },
{ 15, "EINT[7]" },
{ 14, "EINT[6]" },
{ 13, "EINT[5]" },
{ 12, "EINT[4]" },
{ 11, "EINT[3]" },
{ 10, "EINT[2]" },
{ 9, "EINT[1]" },
{ 8, "EINT[0]" },
};
/*
* 253 multi-functional input/output ports
*/
static struct gpio_bank gpio_map_5250[] = {
/* first 132 gpio */
{ "gpa0", 0, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpa1", 0, 0x020, 6, 0x704, 0x808, 0x904, 0xA04 },
{ "gpa2", 0, 0x040, 8, 0x708, 0x810, 0x908, 0xA08 },
{ "gpb0", 0, 0x060, 5, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpb1", 0, 0x080, 5, 0x710, 0x820, 0x910, 0xA10 },
{ "gpb2", 0, 0x0A0, 4, 0x714, 0x828, 0x914, 0xA14 },
{ "gpb3", 0, 0x0C0, 4, 0x718, 0x830, 0x918, 0xA18 },
{ "gpc0", 0, 0x0E0, 7, 0x71C, 0x838, 0x91C, 0xA1C },
{ "gpc1", 0, 0x100, 4, 0x720, 0x840, 0x920, 0xA20 },
{ "gpc2", 0, 0x120, 7, 0x724, 0x848, 0x924, 0xA24 },
{ "gpc3", 0, 0x140, 7, 0x728, 0x850, 0x928, 0xA28 },
{ "gpd0", 0, 0x160, 4, 0x72C, 0x858, 0x92C, 0xA2C },
{ "gpd1", 0, 0x180, 8, 0x730, 0x860, 0x930, 0xA30 },
{ "gpy0", 0, 0x1A0, 6, 0, 0, 0, 0 },
{ "gpy1", 0, 0x1C0, 4, 0, 0, 0, 0 },
{ "gpy2", 0, 0x1E0, 6, 0, 0, 0, 0 },
{ "gpy3", 0, 0x200, 8, 0, 0, 0, 0 },
{ "gpy4", 0, 0x220, 8, 0, 0, 0, 0 },
{ "gpy5", 0, 0x240, 8, 0, 0, 0, 0 },
{ "gpy6", 0, 0x260, 8, 0, 0, 0, 0 },
{ "gpc4", 0, 0x2E0, 7, 0x734, 0x868, 0x934, 0xA34 },
/* next 32 */
{ "gpx0", 0, 0xC00, 8, 0xE00, 0xE80, 0xF00, 0xF40 },
{ "gpx1", 0, 0xC20, 8, 0xE04, 0xE88, 0xF04, 0xF44 },
{ "gpx2", 0, 0xC40, 8, 0xE08, 0xE90, 0xF08, 0xF48 },
{ "gpx3", 0, 0xC60, 8, 0xE0C, 0xE98, 0xF0C, 0xF4C },
{ "gpe0", 1, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpe1", 1, 0x020, 2, 0x704, 0x808, 0x904, 0xA04 },
{ "gpf0", 1, 0x040, 4, 0x708, 0x810, 0x908, 0xA08 },
{ "gpf1", 1, 0x060, 4, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpg0", 1, 0x080, 8, 0x710, 0x820, 0x910, 0xA10 },
{ "gpg1", 1, 0x0A0, 8, 0x714, 0x828, 0x914, 0xA14 },
{ "gpg2", 1, 0x0C0, 2, 0x718, 0x830, 0x918, 0xA18 },
{ "gph0", 1, 0x0E0, 4, 0x71C, 0x838, 0x91C, 0xA1C },
{ "gph1", 1, 0x100, 8, 0x720, 0x840, 0x920, 0xA20 },
{ "gpv0", 2, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpv1", 2, 0x020, 8, 0x704, 0x808, 0x904, 0xA04 },
{ "gpv2", 2, 0x060, 8, 0x708, 0x810, 0x908, 0xA08 },
{ "gpv3", 2, 0x080, 8, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpv4", 2, 0x0C0, 2, 0x710, 0x820, 0x910, 0xA10 },
{ "gpz", 3, 0x000, 7, 0x700, 0x800, 0x900, 0xA00 },
{ NULL, -1, -1, -1, -1, -1, -1, -1 },
};
static struct gpio_bank gpio_map_5420[] = {
/* First 40 */
{ "gpy7", 0, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpx0", 0, 0xC00, 8, 0x704, 0xE80, 0xF00, 0xF40 },
{ "gpx1", 0, 0xC20, 8, 0x708, 0xE88, 0xF04, 0xF44 },
{ "gpx2", 0, 0xC40, 8, 0x70C, 0xE90, 0xF08, 0xF48 },
{ "gpx3", 0, 0xC60, 8, 0x710, 0xE98, 0xF0C, 0xF4C },
/* Next 85 */
{ "gpc0", 1, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpc1", 1, 0x020, 8, 0x704, 0x808, 0x904, 0xA04 },
{ "gpc2", 1, 0x040, 7, 0x708, 0x810, 0x908, 0xA08 },
{ "gpc3", 1, 0x060, 4, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpc4", 1, 0x080, 2, 0x710, 0x820, 0x910, 0xA10 },
{ "gpd1", 1, 0x0A0, 8, 0x714, 0x828, 0x914, 0xA14 },
{ "gpy0", 1, 0x0C0, 6, 0x718, 0x830, 0x918, 0xA18 },
{ "gpy1", 1, 0x0E0, 4, 0x71C, 0x838, 0x91C, 0xA1C },
{ "gpy2", 1, 0x100, 6, 0x720, 0x840, 0x920, 0xA20 },
{ "gpy3", 1, 0x120, 8, 0x724, 0x848, 0x924, 0xA24 },
{ "gpy4", 1, 0x140, 8, 0x728, 0x850, 0x928, 0xA28 },
{ "gpy5", 1, 0x160, 8, 0x72C, 0x858, 0x92C, 0xA2C },
{ "gpy6", 1, 0x180, 8, 0x730, 0x860, 0x930, 0xA30 },
/* Next 46 */
{ "gpe0", 2, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpe1", 2, 0x020, 2, 0x704, 0x808, 0x904, 0xA04 },
{ "gpf0", 2, 0x040, 6, 0x708, 0x810, 0x908, 0xA08 },
{ "gpf1", 2, 0x060, 8, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpg0", 2, 0x080, 8, 0x710, 0x820, 0x910, 0xA10 },
{ "gpg1", 2, 0x0A0, 8, 0x714, 0x828, 0x914, 0xA14 },
{ "gpg2", 2, 0x0C0, 2, 0x718, 0x830, 0x918, 0xA18 },
{ "gpj4", 2, 0x0E0, 4, 0x71C, 0x838, 0x91C, 0xA1C },
/* Next 54 */
{ "gpa0", 3, 0x000, 8, 0x700, 0x800, 0x900, 0xA00 },
{ "gpa1", 3, 0x020, 6, 0x704, 0x808, 0x904, 0xA04 },
{ "gpa2", 3, 0x040, 8, 0x708, 0x810, 0x908, 0xA08 },
{ "gpb0", 3, 0x060, 5, 0x70C, 0x818, 0x90C, 0xA0C },
{ "gpb1", 3, 0x080, 5, 0x710, 0x820, 0x910, 0xA10 },
{ "gpb2", 3, 0x0A0, 4, 0x714, 0x828, 0x914, 0xA14 },
{ "gpb3", 3, 0x0C0, 8, 0x718, 0x830, 0x918, 0xA18 },
{ "gpb4", 3, 0x0E0, 2, 0x71C, 0x838, 0x91C, 0xA1C },
{ "gph0", 3, 0x100, 8, 0x720, 0x840, 0x920, 0xA20 },
/* Last 7 */
{ "gpz", 4, 0x000, 7, 0x700, 0x800, 0x900, 0xA00 },
{ NULL, -1, -1, -1, -1, -1, -1, -1 },
};
static int
get_bank(struct pad_softc *sc, int gpio_number,
struct gpio_bank *bank, int *pin_shift)
{
int ngpio;
int i;
int n;
n = 0;
for (i = 0; sc->gpio_map[i].ngpio != -1; i++) {
ngpio = sc->gpio_map[i].ngpio;
if ((n + ngpio) > gpio_number) {
*bank = sc->gpio_map[i];
*pin_shift = (gpio_number - n);
return (0);
}
n += ngpio;
}
return (-1);
}
static int
port_intr(void *arg)
{
struct port_softc *sc;
sc = arg;
return (FILTER_HANDLED);
}
static void
ext_intr(void *arg)
{
struct pad_softc *sc;
void (*ih) (void *);
void *ih_user;
int ngpio;
int found;
int reg;
int i,j;
int n,k;
sc = arg;
n = 0;
for (i = 0; sc->gpio_map[i].ngpio != -1; i++) {
found = 0;
ngpio = sc->gpio_map[i].ngpio;
if (sc->gpio_map[i].pend == 0) {
n += ngpio;
continue;
}
reg = READ4(sc, sc->gpio_map[i].port, sc->gpio_map[i].pend);
for (j = 0; j < ngpio; j++) {
if (reg & (1 << j)) {
found = 1;
k = (n + j);
if (intr_map[k].enabled == 1) {
ih = intr_map[k].ih;
ih_user = intr_map[k].ih_user;
ih(ih_user);
}
}
}
if (found) {
/* ACK */
WRITE4(sc, sc->gpio_map[i].port, sc->gpio_map[i].pend, reg);
}
n += ngpio;
}
}
int
pad_setup_intr(int gpio_number, void (*ih)(void *), void *ih_user)
{
struct interrupt_entry *entry;
struct pad_intr *pad_irq;
struct gpio_bank bank;
struct pad_softc *sc;
int pin_shift;
int reg;
int i;
sc = gpio_sc;
if (sc == NULL) {
device_printf(sc->dev, "Error: pad is not attached\n");
return (-1);
}
if (get_bank(sc, gpio_number, &bank, &pin_shift) != 0)
return (-1);
entry = NULL;
for (i = 0; i < N_EXT_INTS; i++)
if (sc->interrupt_table[i].gpio_number == gpio_number)
entry = &(sc->interrupt_table[i]);
if (entry == NULL) {
device_printf(sc->dev, "Cant find interrupt source for %d\n",
gpio_number);
return (-1);
}
#if 0
printf("Request interrupt name %s\n", entry->combiner_source_name);
#endif
pad_irq = &intr_map[gpio_number];
pad_irq->enabled = 1;
pad_irq->ih = ih;
pad_irq->ih_user = ih_user;
/* Setup port as external interrupt source */
reg = READ4(sc, bank.port, bank.con);
reg |= (0xf << (pin_shift * 4));
#if 0
printf("writing 0x%08x to 0x%08x\n", reg, bank.con);
#endif
WRITE4(sc, bank.port, bank.con, reg);
/*
* Configure interrupt pin
*
* 0x0 = Sets Low level
* 0x1 = Sets High level
* 0x2 = Triggers Falling edge
* 0x3 = Triggers Rising edge
* 0x4 = Triggers Both edge
*
* TODO: add parameter. For now configure as 0x0
*/
reg = READ4(sc, bank.port, bank.ext_con);
reg &= ~(0x7 << (pin_shift * 4));
WRITE4(sc, bank.port, bank.ext_con, reg);
/* Unmask */
reg = READ4(sc, bank.port, bank.mask);
reg &= ~(1 << pin_shift);
WRITE4(sc, bank.port, bank.mask, reg);
combiner_setup_intr(entry->combiner_source_name, ext_intr, sc);
return (0);
}
static int
pad_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
device_set_desc(dev, "Exynos Pad Control");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static int
pad_attach(device_t dev)
{
struct gpio_bank bank;
struct pad_softc *sc;
int pin_shift;
int reg;
int i;
sc = device_get_softc(dev);
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
sc->model = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
switch (sc->model) {
case EXYNOS5250:
sc->pad_spec = pad_spec_5250;
sc->gpio_map = gpio_map_5250;
sc->interrupt_table = interrupt_table_5250;
sc->gpio_npins = 253;
sc->nports = 4;
break;
case EXYNOS5420:
sc->pad_spec = pad_spec_5420;
sc->gpio_map = gpio_map_5420;
sc->interrupt_table = interrupt_table_5420;
sc->gpio_npins = 232;
sc->nports = 5;
break;
default:
goto fail;
}
if (bus_alloc_resources(dev, sc->pad_spec, sc->res)) {
device_printf(dev, "could not allocate resources\n");
goto fail;
}
/* Memory interface */
for (i = 0; i < sc->nports; i++) {
sc->bst[i] = rman_get_bustag(sc->res[i]);
sc->bsh[i] = rman_get_bushandle(sc->res[i]);
}
sc->dev = dev;
gpio_sc = sc;
for (i = 0; i < sc->nports; i++) {
if ((bus_setup_intr(dev, sc->res[sc->nports + i],
INTR_TYPE_BIO | INTR_MPSAFE, port_intr,
NULL, sc, &sc->gpio_ih[i]))) {
device_printf(dev,
"ERROR: Unable to register interrupt handler\n");
goto fail;
}
}
for (i = 0; i < sc->gpio_npins; i++) {
sc->gpio_pins[i].gp_pin = i;
sc->gpio_pins[i].gp_caps = DEFAULT_CAPS;
if (get_bank(sc, i, &bank, &pin_shift) != 0)
continue;
pin_shift *= 4;
reg = READ4(sc, bank.port, bank.con);
if (reg & (PIN_OUT << pin_shift))
sc->gpio_pins[i].gp_flags = GPIO_PIN_OUTPUT;
else
sc->gpio_pins[i].gp_flags = GPIO_PIN_INPUT;
/* TODO: add other pin statuses */
snprintf(sc->gpio_pins[i].gp_name, GPIOMAXNAME,
"pad%d.%d", device_get_unit(dev), i);
}
sc->busdev = gpiobus_attach_bus(dev);
if (sc->busdev == NULL)
goto fail;
return (0);
fail:
for (i = 0; i < sc->nports; i++) {
if (sc->gpio_ih[i])
bus_teardown_intr(dev, sc->res[sc->nports + i],
sc->gpio_ih[i]);
}
bus_release_resources(dev, sc->pad_spec, sc->res);
mtx_destroy(&sc->sc_mtx);
return (ENXIO);
}
static device_t
pad_get_bus(device_t dev)
{
struct pad_softc *sc;
sc = device_get_softc(dev);
return (sc->busdev);
}
static int
pad_pin_max(device_t dev, int *maxpin)
{
struct pad_softc *sc;
sc = device_get_softc(dev);
*maxpin = sc->gpio_npins - 1;
return (0);
}
static int
pad_pin_getname(device_t dev, uint32_t pin, char *name)
{
struct pad_softc *sc;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
GPIO_LOCK(sc);
memcpy(name, sc->gpio_pins[i].gp_name, GPIOMAXNAME);
GPIO_UNLOCK(sc);
return (0);
}
static int
pad_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
{
struct pad_softc *sc;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
GPIO_LOCK(sc);
*caps = sc->gpio_pins[i].gp_caps;
GPIO_UNLOCK(sc);
return (0);
}
static int
pad_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags)
{
struct pad_softc *sc;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
GPIO_LOCK(sc);
*flags = sc->gpio_pins[i].gp_flags;
GPIO_UNLOCK(sc);
return (0);
}
static int
pad_pin_get(device_t dev, uint32_t pin, unsigned int *val)
{
struct gpio_bank bank;
struct pad_softc *sc;
int pin_shift;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
if (get_bank(sc, pin, &bank, &pin_shift) != 0)
return (EINVAL);
GPIO_LOCK(sc);
if (READ4(sc, bank.port, bank.con + 0x4) & (1 << pin_shift))
*val = 1;
else
*val = 0;
GPIO_UNLOCK(sc);
return (0);
}
static int
pad_pin_toggle(device_t dev, uint32_t pin)
{
struct gpio_bank bank;
struct pad_softc *sc;
int pin_shift;
int reg;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
if (get_bank(sc, pin, &bank, &pin_shift) != 0)
return (EINVAL);
GPIO_LOCK(sc);
reg = READ4(sc, bank.port, bank.con + 0x4);
if (reg & (1 << pin_shift))
reg &= ~(1 << pin_shift);
else
reg |= (1 << pin_shift);
WRITE4(sc, bank.port, bank.con + 0x4, reg);
GPIO_UNLOCK(sc);
return (0);
}
static void
pad_pin_configure(struct pad_softc *sc, struct gpio_pin *pin,
unsigned int flags)
{
struct gpio_bank bank;
int pin_shift;
int reg;
GPIO_LOCK(sc);
/*
* Manage input/output
*/
if (flags & (GPIO_PIN_INPUT|GPIO_PIN_OUTPUT)) {
pin->gp_flags &= ~(GPIO_PIN_INPUT|GPIO_PIN_OUTPUT);
if (get_bank(sc, pin->gp_pin, &bank, &pin_shift) != 0)
return;
pin_shift *= 4;
#if 0
printf("bank is 0x%08x pin_shift %d\n", bank.con, pin_shift);
#endif
if (flags & GPIO_PIN_OUTPUT) {
pin->gp_flags |= GPIO_PIN_OUTPUT;
reg = READ4(sc, bank.port, bank.con);
reg &= ~(0xf << pin_shift);
reg |= (PIN_OUT << pin_shift);
WRITE4(sc, bank.port, bank.con, reg);
} else {
pin->gp_flags |= GPIO_PIN_INPUT;
reg = READ4(sc, bank.port, bank.con);
reg &= ~(0xf << pin_shift);
WRITE4(sc, bank.port, bank.con, reg);
}
}
GPIO_UNLOCK(sc);
}
static int
pad_pin_setflags(device_t dev, uint32_t pin, uint32_t flags)
{
struct pad_softc *sc;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
pad_pin_configure(sc, &sc->gpio_pins[i], flags);
return (0);
}
static int
pad_pin_set(device_t dev, uint32_t pin, unsigned int value)
{
struct pad_softc *sc;
struct gpio_bank bank;
int pin_shift;
int reg;
int i;
sc = device_get_softc(dev);
for (i = 0; i < sc->gpio_npins; i++) {
if (sc->gpio_pins[i].gp_pin == pin)
break;
}
if (i >= sc->gpio_npins)
return (EINVAL);
if (get_bank(sc, pin, &bank, &pin_shift) != 0)
return (EINVAL);
GPIO_LOCK(sc);
reg = READ4(sc, bank.port, bank.con + 0x4);
reg &= ~(PIN_OUT << pin_shift);
if (value)
reg |= (PIN_OUT << pin_shift);
WRITE4(sc, bank.port, bank.con + 0x4, reg);
GPIO_UNLOCK(sc);
return (0);
}
static device_method_t pad_methods[] = {
DEVMETHOD(device_probe, pad_probe),
DEVMETHOD(device_attach, pad_attach),
/* GPIO protocol */
DEVMETHOD(gpio_get_bus, pad_get_bus),
DEVMETHOD(gpio_pin_max, pad_pin_max),
DEVMETHOD(gpio_pin_getname, pad_pin_getname),
DEVMETHOD(gpio_pin_getcaps, pad_pin_getcaps),
DEVMETHOD(gpio_pin_getflags, pad_pin_getflags),
DEVMETHOD(gpio_pin_get, pad_pin_get),
DEVMETHOD(gpio_pin_toggle, pad_pin_toggle),
DEVMETHOD(gpio_pin_setflags, pad_pin_setflags),
DEVMETHOD(gpio_pin_set, pad_pin_set),
{ 0, 0 }
};
static driver_t pad_driver = {
"gpio",
pad_methods,
sizeof(struct pad_softc),
};
static devclass_t pad_devclass;
DRIVER_MODULE(pad, simplebus, pad_driver, pad_devclass, 0, 0);