freebsd-dev/sys/kern/kern_cpu.c
Colin Percival 760f4dec67 In cf_get_method, when we don't already know what clock speed the CPU is
running at, guess the nearest value instead of looking for a value within
25 MHz of the observed frequency.

Prior to this change, if a system booted with Intel Turbo Boost enabled,
the dev.cpu.0.freq sysctl is nonfunctional, since the ACPI-reported
frequency for Turbo Boost states does not match the actual clock frequency
(and thus no levels are within 25 MHz of the observed frequency) and the
current performance level is read before a new level is set.

MFC after:	3 days
Relnotes:	Bug fix in power management on CPUs with Intel Turbo Boost
2014-05-11 10:32:58 +00:00

1066 lines
29 KiB
C

/*-
* Copyright (c) 2004-2007 Nate Lawson (SDG)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/sbuf.h>
#include <sys/sched.h>
#include <sys/smp.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/sx.h>
#include <sys/timetc.h>
#include <sys/taskqueue.h>
#include "cpufreq_if.h"
/*
* Common CPU frequency glue code. Drivers for specific hardware can
* attach this interface to allow users to get/set the CPU frequency.
*/
/*
* Number of levels we can handle. Levels are synthesized from settings
* so for M settings and N drivers, there may be M*N levels.
*/
#define CF_MAX_LEVELS 64
struct cf_saved_freq {
struct cf_level level;
int priority;
SLIST_ENTRY(cf_saved_freq) link;
};
struct cpufreq_softc {
struct sx lock;
struct cf_level curr_level;
int curr_priority;
SLIST_HEAD(, cf_saved_freq) saved_freq;
struct cf_level_lst all_levels;
int all_count;
int max_mhz;
device_t dev;
struct sysctl_ctx_list sysctl_ctx;
struct task startup_task;
struct cf_level *levels_buf;
};
struct cf_setting_array {
struct cf_setting sets[MAX_SETTINGS];
int count;
TAILQ_ENTRY(cf_setting_array) link;
};
TAILQ_HEAD(cf_setting_lst, cf_setting_array);
#define CF_MTX_INIT(x) sx_init((x), "cpufreq lock")
#define CF_MTX_LOCK(x) sx_xlock((x))
#define CF_MTX_UNLOCK(x) sx_xunlock((x))
#define CF_MTX_ASSERT(x) sx_assert((x), SX_XLOCKED)
#define CF_DEBUG(msg...) do { \
if (cf_verbose) \
printf("cpufreq: " msg); \
} while (0)
static int cpufreq_attach(device_t dev);
static void cpufreq_startup_task(void *ctx, int pending);
static int cpufreq_detach(device_t dev);
static int cf_set_method(device_t dev, const struct cf_level *level,
int priority);
static int cf_get_method(device_t dev, struct cf_level *level);
static int cf_levels_method(device_t dev, struct cf_level *levels,
int *count);
static int cpufreq_insert_abs(struct cpufreq_softc *sc,
struct cf_setting *sets, int count);
static int cpufreq_expand_set(struct cpufreq_softc *sc,
struct cf_setting_array *set_arr);
static struct cf_level *cpufreq_dup_set(struct cpufreq_softc *sc,
struct cf_level *dup, struct cf_setting *set);
static int cpufreq_curr_sysctl(SYSCTL_HANDLER_ARGS);
static int cpufreq_levels_sysctl(SYSCTL_HANDLER_ARGS);
static int cpufreq_settings_sysctl(SYSCTL_HANDLER_ARGS);
static device_method_t cpufreq_methods[] = {
DEVMETHOD(device_probe, bus_generic_probe),
DEVMETHOD(device_attach, cpufreq_attach),
DEVMETHOD(device_detach, cpufreq_detach),
DEVMETHOD(cpufreq_set, cf_set_method),
DEVMETHOD(cpufreq_get, cf_get_method),
DEVMETHOD(cpufreq_levels, cf_levels_method),
{0, 0}
};
static driver_t cpufreq_driver = {
"cpufreq", cpufreq_methods, sizeof(struct cpufreq_softc)
};
static devclass_t cpufreq_dc;
DRIVER_MODULE(cpufreq, cpu, cpufreq_driver, cpufreq_dc, 0, 0);
static int cf_lowest_freq;
static int cf_verbose;
TUNABLE_INT("debug.cpufreq.lowest", &cf_lowest_freq);
TUNABLE_INT("debug.cpufreq.verbose", &cf_verbose);
static SYSCTL_NODE(_debug, OID_AUTO, cpufreq, CTLFLAG_RD, NULL,
"cpufreq debugging");
SYSCTL_INT(_debug_cpufreq, OID_AUTO, lowest, CTLFLAG_RW, &cf_lowest_freq, 1,
"Don't provide levels below this frequency.");
SYSCTL_INT(_debug_cpufreq, OID_AUTO, verbose, CTLFLAG_RW, &cf_verbose, 1,
"Print verbose debugging messages");
static int
cpufreq_attach(device_t dev)
{
struct cpufreq_softc *sc;
struct pcpu *pc;
device_t parent;
uint64_t rate;
int numdevs;
CF_DEBUG("initializing %s\n", device_get_nameunit(dev));
sc = device_get_softc(dev);
parent = device_get_parent(dev);
sc->dev = dev;
sysctl_ctx_init(&sc->sysctl_ctx);
TAILQ_INIT(&sc->all_levels);
CF_MTX_INIT(&sc->lock);
sc->curr_level.total_set.freq = CPUFREQ_VAL_UNKNOWN;
SLIST_INIT(&sc->saved_freq);
/* Try to get nominal CPU freq to use it as maximum later if needed */
sc->max_mhz = cpu_get_nominal_mhz(dev);
/* If that fails, try to measure the current rate */
if (sc->max_mhz <= 0) {
pc = cpu_get_pcpu(dev);
if (cpu_est_clockrate(pc->pc_cpuid, &rate) == 0)
sc->max_mhz = rate / 1000000;
else
sc->max_mhz = CPUFREQ_VAL_UNKNOWN;
}
/*
* Only initialize one set of sysctls for all CPUs. In the future,
* if multiple CPUs can have different settings, we can move these
* sysctls to be under every CPU instead of just the first one.
*/
numdevs = devclass_get_count(cpufreq_dc);
if (numdevs > 1)
return (0);
CF_DEBUG("initializing one-time data for %s\n",
device_get_nameunit(dev));
sc->levels_buf = malloc(CF_MAX_LEVELS * sizeof(*sc->levels_buf),
M_DEVBUF, M_WAITOK);
SYSCTL_ADD_PROC(&sc->sysctl_ctx,
SYSCTL_CHILDREN(device_get_sysctl_tree(parent)),
OID_AUTO, "freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
cpufreq_curr_sysctl, "I", "Current CPU frequency");
SYSCTL_ADD_PROC(&sc->sysctl_ctx,
SYSCTL_CHILDREN(device_get_sysctl_tree(parent)),
OID_AUTO, "freq_levels", CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
cpufreq_levels_sysctl, "A", "CPU frequency levels");
/*
* Queue a one-shot broadcast that levels have changed.
* It will run once the system has completed booting.
*/
TASK_INIT(&sc->startup_task, 0, cpufreq_startup_task, dev);
taskqueue_enqueue(taskqueue_thread, &sc->startup_task);
return (0);
}
/* Handle any work to be done for all drivers that attached during boot. */
static void
cpufreq_startup_task(void *ctx, int pending)
{
cpufreq_settings_changed((device_t)ctx);
}
static int
cpufreq_detach(device_t dev)
{
struct cpufreq_softc *sc;
struct cf_saved_freq *saved_freq;
int numdevs;
CF_DEBUG("shutdown %s\n", device_get_nameunit(dev));
sc = device_get_softc(dev);
sysctl_ctx_free(&sc->sysctl_ctx);
while ((saved_freq = SLIST_FIRST(&sc->saved_freq)) != NULL) {
SLIST_REMOVE_HEAD(&sc->saved_freq, link);
free(saved_freq, M_TEMP);
}
/* Only clean up these resources when the last device is detaching. */
numdevs = devclass_get_count(cpufreq_dc);
if (numdevs == 1) {
CF_DEBUG("final shutdown for %s\n", device_get_nameunit(dev));
free(sc->levels_buf, M_DEVBUF);
}
return (0);
}
static int
cf_set_method(device_t dev, const struct cf_level *level, int priority)
{
struct cpufreq_softc *sc;
const struct cf_setting *set;
struct cf_saved_freq *saved_freq, *curr_freq;
struct pcpu *pc;
int error, i;
sc = device_get_softc(dev);
error = 0;
set = NULL;
saved_freq = NULL;
/* We are going to change levels so notify the pre-change handler. */
EVENTHANDLER_INVOKE(cpufreq_pre_change, level, &error);
if (error != 0) {
EVENTHANDLER_INVOKE(cpufreq_post_change, level, error);
return (error);
}
CF_MTX_LOCK(&sc->lock);
#ifdef SMP
/*
* If still booting and secondary CPUs not started yet, don't allow
* changing the frequency until they're online. This is because we
* can't switch to them using sched_bind() and thus we'd only be
* switching the main CPU. XXXTODO: Need to think more about how to
* handle having different CPUs at different frequencies.
*/
if (mp_ncpus > 1 && !smp_started) {
device_printf(dev, "rejecting change, SMP not started yet\n");
error = ENXIO;
goto out;
}
#endif /* SMP */
/*
* If the requested level has a lower priority, don't allow
* the new level right now.
*/
if (priority < sc->curr_priority) {
CF_DEBUG("ignoring, curr prio %d less than %d\n", priority,
sc->curr_priority);
error = EPERM;
goto out;
}
/*
* If the caller didn't specify a level and one is saved, prepare to
* restore the saved level. If none has been saved, return an error.
*/
if (level == NULL) {
saved_freq = SLIST_FIRST(&sc->saved_freq);
if (saved_freq == NULL) {
CF_DEBUG("NULL level, no saved level\n");
error = ENXIO;
goto out;
}
level = &saved_freq->level;
priority = saved_freq->priority;
CF_DEBUG("restoring saved level, freq %d prio %d\n",
level->total_set.freq, priority);
}
/* Reject levels that are below our specified threshold. */
if (level->total_set.freq < cf_lowest_freq) {
CF_DEBUG("rejecting freq %d, less than %d limit\n",
level->total_set.freq, cf_lowest_freq);
error = EINVAL;
goto out;
}
/* If already at this level, just return. */
if (sc->curr_level.total_set.freq == level->total_set.freq) {
CF_DEBUG("skipping freq %d, same as current level %d\n",
level->total_set.freq, sc->curr_level.total_set.freq);
goto skip;
}
/* First, set the absolute frequency via its driver. */
set = &level->abs_set;
if (set->dev) {
if (!device_is_attached(set->dev)) {
error = ENXIO;
goto out;
}
/* Bind to the target CPU before switching. */
pc = cpu_get_pcpu(set->dev);
thread_lock(curthread);
sched_bind(curthread, pc->pc_cpuid);
thread_unlock(curthread);
CF_DEBUG("setting abs freq %d on %s (cpu %d)\n", set->freq,
device_get_nameunit(set->dev), PCPU_GET(cpuid));
error = CPUFREQ_DRV_SET(set->dev, set);
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
if (error) {
goto out;
}
}
/* Next, set any/all relative frequencies via their drivers. */
for (i = 0; i < level->rel_count; i++) {
set = &level->rel_set[i];
if (!device_is_attached(set->dev)) {
error = ENXIO;
goto out;
}
/* Bind to the target CPU before switching. */
pc = cpu_get_pcpu(set->dev);
thread_lock(curthread);
sched_bind(curthread, pc->pc_cpuid);
thread_unlock(curthread);
CF_DEBUG("setting rel freq %d on %s (cpu %d)\n", set->freq,
device_get_nameunit(set->dev), PCPU_GET(cpuid));
error = CPUFREQ_DRV_SET(set->dev, set);
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
if (error) {
/* XXX Back out any successful setting? */
goto out;
}
}
skip:
/*
* Before recording the current level, check if we're going to a
* higher priority. If so, save the previous level and priority.
*/
if (sc->curr_level.total_set.freq != CPUFREQ_VAL_UNKNOWN &&
priority > sc->curr_priority) {
CF_DEBUG("saving level, freq %d prio %d\n",
sc->curr_level.total_set.freq, sc->curr_priority);
curr_freq = malloc(sizeof(*curr_freq), M_TEMP, M_NOWAIT);
if (curr_freq == NULL) {
error = ENOMEM;
goto out;
}
curr_freq->level = sc->curr_level;
curr_freq->priority = sc->curr_priority;
SLIST_INSERT_HEAD(&sc->saved_freq, curr_freq, link);
}
sc->curr_level = *level;
sc->curr_priority = priority;
/* If we were restoring a saved state, reset it to "unused". */
if (saved_freq != NULL) {
CF_DEBUG("resetting saved level\n");
sc->curr_level.total_set.freq = CPUFREQ_VAL_UNKNOWN;
SLIST_REMOVE_HEAD(&sc->saved_freq, link);
free(saved_freq, M_TEMP);
}
out:
CF_MTX_UNLOCK(&sc->lock);
/*
* We changed levels (or attempted to) so notify the post-change
* handler of new frequency or error.
*/
EVENTHANDLER_INVOKE(cpufreq_post_change, level, error);
if (error && set)
device_printf(set->dev, "set freq failed, err %d\n", error);
return (error);
}
static int
cf_get_method(device_t dev, struct cf_level *level)
{
struct cpufreq_softc *sc;
struct cf_level *levels;
struct cf_setting *curr_set, set;
struct pcpu *pc;
device_t *devs;
int bdiff, count, diff, error, i, n, numdevs;
uint64_t rate;
sc = device_get_softc(dev);
error = 0;
levels = NULL;
/* If we already know the current frequency, we're done. */
CF_MTX_LOCK(&sc->lock);
curr_set = &sc->curr_level.total_set;
if (curr_set->freq != CPUFREQ_VAL_UNKNOWN) {
CF_DEBUG("get returning known freq %d\n", curr_set->freq);
goto out;
}
CF_MTX_UNLOCK(&sc->lock);
/*
* We need to figure out the current level. Loop through every
* driver, getting the current setting. Then, attempt to get a best
* match of settings against each level.
*/
count = CF_MAX_LEVELS;
levels = malloc(count * sizeof(*levels), M_TEMP, M_NOWAIT);
if (levels == NULL)
return (ENOMEM);
error = CPUFREQ_LEVELS(sc->dev, levels, &count);
if (error) {
if (error == E2BIG)
printf("cpufreq: need to increase CF_MAX_LEVELS\n");
free(levels, M_TEMP);
return (error);
}
error = device_get_children(device_get_parent(dev), &devs, &numdevs);
if (error) {
free(levels, M_TEMP);
return (error);
}
/*
* Reacquire the lock and search for the given level.
*
* XXX Note: this is not quite right since we really need to go
* through each level and compare both absolute and relative
* settings for each driver in the system before making a match.
* The estimation code below catches this case though.
*/
CF_MTX_LOCK(&sc->lock);
for (n = 0; n < numdevs && curr_set->freq == CPUFREQ_VAL_UNKNOWN; n++) {
if (!device_is_attached(devs[n]))
continue;
if (CPUFREQ_DRV_GET(devs[n], &set) != 0)
continue;
for (i = 0; i < count; i++) {
if (set.freq == levels[i].total_set.freq) {
sc->curr_level = levels[i];
break;
}
}
}
free(devs, M_TEMP);
if (curr_set->freq != CPUFREQ_VAL_UNKNOWN) {
CF_DEBUG("get matched freq %d from drivers\n", curr_set->freq);
goto out;
}
/*
* We couldn't find an exact match, so attempt to estimate and then
* match against a level.
*/
pc = cpu_get_pcpu(dev);
if (pc == NULL) {
error = ENXIO;
goto out;
}
cpu_est_clockrate(pc->pc_cpuid, &rate);
rate /= 1000000;
bdiff = 1 << 30;
for (i = 0; i < count; i++) {
diff = abs(levels[i].total_set.freq - rate);
if (diff < bdiff) {
bdiff = diff;
sc->curr_level = levels[i];
}
}
CF_DEBUG("get estimated freq %d\n", curr_set->freq);
out:
if (error == 0)
*level = sc->curr_level;
CF_MTX_UNLOCK(&sc->lock);
if (levels)
free(levels, M_TEMP);
return (error);
}
static int
cf_levels_method(device_t dev, struct cf_level *levels, int *count)
{
struct cf_setting_array *set_arr;
struct cf_setting_lst rel_sets;
struct cpufreq_softc *sc;
struct cf_level *lev;
struct cf_setting *sets;
struct pcpu *pc;
device_t *devs;
int error, i, numdevs, set_count, type;
uint64_t rate;
if (levels == NULL || count == NULL)
return (EINVAL);
TAILQ_INIT(&rel_sets);
sc = device_get_softc(dev);
error = device_get_children(device_get_parent(dev), &devs, &numdevs);
if (error)
return (error);
sets = malloc(MAX_SETTINGS * sizeof(*sets), M_TEMP, M_NOWAIT);
if (sets == NULL) {
free(devs, M_TEMP);
return (ENOMEM);
}
/* Get settings from all cpufreq drivers. */
CF_MTX_LOCK(&sc->lock);
for (i = 0; i < numdevs; i++) {
/* Skip devices that aren't ready. */
if (!device_is_attached(devs[i]))
continue;
/*
* Get settings, skipping drivers that offer no settings or
* provide settings for informational purposes only.
*/
error = CPUFREQ_DRV_TYPE(devs[i], &type);
if (error || (type & CPUFREQ_FLAG_INFO_ONLY)) {
if (error == 0) {
CF_DEBUG("skipping info-only driver %s\n",
device_get_nameunit(devs[i]));
}
continue;
}
set_count = MAX_SETTINGS;
error = CPUFREQ_DRV_SETTINGS(devs[i], sets, &set_count);
if (error || set_count == 0)
continue;
/* Add the settings to our absolute/relative lists. */
switch (type & CPUFREQ_TYPE_MASK) {
case CPUFREQ_TYPE_ABSOLUTE:
error = cpufreq_insert_abs(sc, sets, set_count);
break;
case CPUFREQ_TYPE_RELATIVE:
CF_DEBUG("adding %d relative settings\n", set_count);
set_arr = malloc(sizeof(*set_arr), M_TEMP, M_NOWAIT);
if (set_arr == NULL) {
error = ENOMEM;
goto out;
}
bcopy(sets, set_arr->sets, set_count * sizeof(*sets));
set_arr->count = set_count;
TAILQ_INSERT_TAIL(&rel_sets, set_arr, link);
break;
default:
error = EINVAL;
}
if (error)
goto out;
}
/*
* If there are no absolute levels, create a fake one at 100%. We
* then cache the clockrate for later use as our base frequency.
*/
if (TAILQ_EMPTY(&sc->all_levels)) {
if (sc->max_mhz == CPUFREQ_VAL_UNKNOWN) {
sc->max_mhz = cpu_get_nominal_mhz(dev);
/*
* If the CPU can't report a rate for 100%, hope
* the CPU is running at its nominal rate right now,
* and use that instead.
*/
if (sc->max_mhz <= 0) {
pc = cpu_get_pcpu(dev);
cpu_est_clockrate(pc->pc_cpuid, &rate);
sc->max_mhz = rate / 1000000;
}
}
memset(&sets[0], CPUFREQ_VAL_UNKNOWN, sizeof(*sets));
sets[0].freq = sc->max_mhz;
sets[0].dev = NULL;
error = cpufreq_insert_abs(sc, sets, 1);
if (error)
goto out;
}
/* Create a combined list of absolute + relative levels. */
TAILQ_FOREACH(set_arr, &rel_sets, link)
cpufreq_expand_set(sc, set_arr);
/* If the caller doesn't have enough space, return the actual count. */
if (sc->all_count > *count) {
*count = sc->all_count;
error = E2BIG;
goto out;
}
/* Finally, output the list of levels. */
i = 0;
TAILQ_FOREACH(lev, &sc->all_levels, link) {
/* Skip levels that have a frequency that is too low. */
if (lev->total_set.freq < cf_lowest_freq) {
sc->all_count--;
continue;
}
levels[i] = *lev;
i++;
}
*count = sc->all_count;
error = 0;
out:
/* Clear all levels since we regenerate them each time. */
while ((lev = TAILQ_FIRST(&sc->all_levels)) != NULL) {
TAILQ_REMOVE(&sc->all_levels, lev, link);
free(lev, M_TEMP);
}
sc->all_count = 0;
CF_MTX_UNLOCK(&sc->lock);
while ((set_arr = TAILQ_FIRST(&rel_sets)) != NULL) {
TAILQ_REMOVE(&rel_sets, set_arr, link);
free(set_arr, M_TEMP);
}
free(devs, M_TEMP);
free(sets, M_TEMP);
return (error);
}
/*
* Create levels for an array of absolute settings and insert them in
* sorted order in the specified list.
*/
static int
cpufreq_insert_abs(struct cpufreq_softc *sc, struct cf_setting *sets,
int count)
{
struct cf_level_lst *list;
struct cf_level *level, *search;
int i;
CF_MTX_ASSERT(&sc->lock);
list = &sc->all_levels;
for (i = 0; i < count; i++) {
level = malloc(sizeof(*level), M_TEMP, M_NOWAIT | M_ZERO);
if (level == NULL)
return (ENOMEM);
level->abs_set = sets[i];
level->total_set = sets[i];
level->total_set.dev = NULL;
sc->all_count++;
if (TAILQ_EMPTY(list)) {
CF_DEBUG("adding abs setting %d at head\n",
sets[i].freq);
TAILQ_INSERT_HEAD(list, level, link);
continue;
}
TAILQ_FOREACH_REVERSE(search, list, cf_level_lst, link) {
if (sets[i].freq <= search->total_set.freq) {
CF_DEBUG("adding abs setting %d after %d\n",
sets[i].freq, search->total_set.freq);
TAILQ_INSERT_AFTER(list, search, level, link);
break;
}
}
}
return (0);
}
/*
* Expand a group of relative settings, creating derived levels from them.
*/
static int
cpufreq_expand_set(struct cpufreq_softc *sc, struct cf_setting_array *set_arr)
{
struct cf_level *fill, *search;
struct cf_setting *set;
int i;
CF_MTX_ASSERT(&sc->lock);
/*
* Walk the set of all existing levels in reverse. This is so we
* create derived states from the lowest absolute settings first
* and discard duplicates created from higher absolute settings.
* For instance, a level of 50 Mhz derived from 100 Mhz + 50% is
* preferable to 200 Mhz + 25% because absolute settings are more
* efficient since they often change the voltage as well.
*/
TAILQ_FOREACH_REVERSE(search, &sc->all_levels, cf_level_lst, link) {
/* Add each setting to the level, duplicating if necessary. */
for (i = 0; i < set_arr->count; i++) {
set = &set_arr->sets[i];
/*
* If this setting is less than 100%, split the level
* into two and add this setting to the new level.
*/
fill = search;
if (set->freq < 10000) {
fill = cpufreq_dup_set(sc, search, set);
/*
* The new level was a duplicate of an existing
* level or its absolute setting is too high
* so we freed it. For example, we discard a
* derived level of 1000 MHz/25% if a level
* of 500 MHz/100% already exists.
*/
if (fill == NULL)
break;
}
/* Add this setting to the existing or new level. */
KASSERT(fill->rel_count < MAX_SETTINGS,
("cpufreq: too many relative drivers (%d)",
MAX_SETTINGS));
fill->rel_set[fill->rel_count] = *set;
fill->rel_count++;
CF_DEBUG(
"expand set added rel setting %d%% to %d level\n",
set->freq / 100, fill->total_set.freq);
}
}
return (0);
}
static struct cf_level *
cpufreq_dup_set(struct cpufreq_softc *sc, struct cf_level *dup,
struct cf_setting *set)
{
struct cf_level_lst *list;
struct cf_level *fill, *itr;
struct cf_setting *fill_set, *itr_set;
int i;
CF_MTX_ASSERT(&sc->lock);
/*
* Create a new level, copy it from the old one, and update the
* total frequency and power by the percentage specified in the
* relative setting.
*/
fill = malloc(sizeof(*fill), M_TEMP, M_NOWAIT);
if (fill == NULL)
return (NULL);
*fill = *dup;
fill_set = &fill->total_set;
fill_set->freq =
((uint64_t)fill_set->freq * set->freq) / 10000;
if (fill_set->power != CPUFREQ_VAL_UNKNOWN) {
fill_set->power = ((uint64_t)fill_set->power * set->freq)
/ 10000;
}
if (set->lat != CPUFREQ_VAL_UNKNOWN) {
if (fill_set->lat != CPUFREQ_VAL_UNKNOWN)
fill_set->lat += set->lat;
else
fill_set->lat = set->lat;
}
CF_DEBUG("dup set considering derived setting %d\n", fill_set->freq);
/*
* If we copied an old level that we already modified (say, at 100%),
* we need to remove that setting before adding this one. Since we
* process each setting array in order, we know any settings for this
* driver will be found at the end.
*/
for (i = fill->rel_count; i != 0; i--) {
if (fill->rel_set[i - 1].dev != set->dev)
break;
CF_DEBUG("removed last relative driver: %s\n",
device_get_nameunit(set->dev));
fill->rel_count--;
}
/*
* Insert the new level in sorted order. If it is a duplicate of an
* existing level (1) or has an absolute setting higher than the
* existing level (2), do not add it. We can do this since any such
* level is guaranteed use less power. For example (1), a level with
* one absolute setting of 800 Mhz uses less power than one composed
* of an absolute setting of 1600 Mhz and a relative setting at 50%.
* Also for example (2), a level of 800 Mhz/75% is preferable to
* 1600 Mhz/25% even though the latter has a lower total frequency.
*/
list = &sc->all_levels;
KASSERT(!TAILQ_EMPTY(list), ("all levels list empty in dup set"));
TAILQ_FOREACH_REVERSE(itr, list, cf_level_lst, link) {
itr_set = &itr->total_set;
if (CPUFREQ_CMP(fill_set->freq, itr_set->freq)) {
CF_DEBUG("dup set rejecting %d (dupe)\n",
fill_set->freq);
itr = NULL;
break;
} else if (fill_set->freq < itr_set->freq) {
if (fill->abs_set.freq <= itr->abs_set.freq) {
CF_DEBUG(
"dup done, inserting new level %d after %d\n",
fill_set->freq, itr_set->freq);
TAILQ_INSERT_AFTER(list, itr, fill, link);
sc->all_count++;
} else {
CF_DEBUG("dup set rejecting %d (abs too big)\n",
fill_set->freq);
itr = NULL;
}
break;
}
}
/* We didn't find a good place for this new level so free it. */
if (itr == NULL) {
CF_DEBUG("dup set freeing new level %d (not optimal)\n",
fill_set->freq);
free(fill, M_TEMP);
fill = NULL;
}
return (fill);
}
static int
cpufreq_curr_sysctl(SYSCTL_HANDLER_ARGS)
{
struct cpufreq_softc *sc;
struct cf_level *levels;
int best, count, diff, bdiff, devcount, error, freq, i, n;
device_t *devs;
devs = NULL;
sc = oidp->oid_arg1;
levels = sc->levels_buf;
error = CPUFREQ_GET(sc->dev, &levels[0]);
if (error)
goto out;
freq = levels[0].total_set.freq;
error = sysctl_handle_int(oidp, &freq, 0, req);
if (error != 0 || req->newptr == NULL)
goto out;
/*
* While we only call cpufreq_get() on one device (assuming all
* CPUs have equal levels), we call cpufreq_set() on all CPUs.
* This is needed for some MP systems.
*/
error = devclass_get_devices(cpufreq_dc, &devs, &devcount);
if (error)
goto out;
for (n = 0; n < devcount; n++) {
count = CF_MAX_LEVELS;
error = CPUFREQ_LEVELS(devs[n], levels, &count);
if (error) {
if (error == E2BIG)
printf(
"cpufreq: need to increase CF_MAX_LEVELS\n");
break;
}
best = 0;
bdiff = 1 << 30;
for (i = 0; i < count; i++) {
diff = abs(levels[i].total_set.freq - freq);
if (diff < bdiff) {
bdiff = diff;
best = i;
}
}
error = CPUFREQ_SET(devs[n], &levels[best], CPUFREQ_PRIO_USER);
}
out:
if (devs)
free(devs, M_TEMP);
return (error);
}
static int
cpufreq_levels_sysctl(SYSCTL_HANDLER_ARGS)
{
struct cpufreq_softc *sc;
struct cf_level *levels;
struct cf_setting *set;
struct sbuf sb;
int count, error, i;
sc = oidp->oid_arg1;
sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND);
/* Get settings from the device and generate the output string. */
count = CF_MAX_LEVELS;
levels = sc->levels_buf;
if (levels == NULL) {
sbuf_delete(&sb);
return (ENOMEM);
}
error = CPUFREQ_LEVELS(sc->dev, levels, &count);
if (error) {
if (error == E2BIG)
printf("cpufreq: need to increase CF_MAX_LEVELS\n");
goto out;
}
if (count) {
for (i = 0; i < count; i++) {
set = &levels[i].total_set;
sbuf_printf(&sb, "%d/%d ", set->freq, set->power);
}
} else
sbuf_cpy(&sb, "0");
sbuf_trim(&sb);
sbuf_finish(&sb);
error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
out:
sbuf_delete(&sb);
return (error);
}
static int
cpufreq_settings_sysctl(SYSCTL_HANDLER_ARGS)
{
device_t dev;
struct cf_setting *sets;
struct sbuf sb;
int error, i, set_count;
dev = oidp->oid_arg1;
sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND);
/* Get settings from the device and generate the output string. */
set_count = MAX_SETTINGS;
sets = malloc(set_count * sizeof(*sets), M_TEMP, M_NOWAIT);
if (sets == NULL) {
sbuf_delete(&sb);
return (ENOMEM);
}
error = CPUFREQ_DRV_SETTINGS(dev, sets, &set_count);
if (error)
goto out;
if (set_count) {
for (i = 0; i < set_count; i++)
sbuf_printf(&sb, "%d/%d ", sets[i].freq, sets[i].power);
} else
sbuf_cpy(&sb, "0");
sbuf_trim(&sb);
sbuf_finish(&sb);
error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
out:
free(sets, M_TEMP);
sbuf_delete(&sb);
return (error);
}
int
cpufreq_register(device_t dev)
{
struct cpufreq_softc *sc;
device_t cf_dev, cpu_dev;
/* Add a sysctl to get each driver's settings separately. */
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "freq_settings", CTLTYPE_STRING | CTLFLAG_RD, dev, 0,
cpufreq_settings_sysctl, "A", "CPU frequency driver settings");
/*
* Add only one cpufreq device to each CPU. Currently, all CPUs
* must offer the same levels and be switched at the same time.
*/
cpu_dev = device_get_parent(dev);
if ((cf_dev = device_find_child(cpu_dev, "cpufreq", -1))) {
sc = device_get_softc(cf_dev);
sc->max_mhz = CPUFREQ_VAL_UNKNOWN;
return (0);
}
/* Add the child device and possibly sysctls. */
cf_dev = BUS_ADD_CHILD(cpu_dev, 0, "cpufreq", -1);
if (cf_dev == NULL)
return (ENOMEM);
device_quiet(cf_dev);
return (device_probe_and_attach(cf_dev));
}
int
cpufreq_unregister(device_t dev)
{
device_t cf_dev, *devs;
int cfcount, devcount, error, i, type;
/*
* If this is the last cpufreq child device, remove the control
* device as well. We identify cpufreq children by calling a method
* they support.
*/
error = device_get_children(device_get_parent(dev), &devs, &devcount);
if (error)
return (error);
cf_dev = device_find_child(device_get_parent(dev), "cpufreq", -1);
if (cf_dev == NULL) {
device_printf(dev,
"warning: cpufreq_unregister called with no cpufreq device active\n");
free(devs, M_TEMP);
return (0);
}
cfcount = 0;
for (i = 0; i < devcount; i++) {
if (!device_is_attached(devs[i]))
continue;
if (CPUFREQ_DRV_TYPE(devs[i], &type) == 0)
cfcount++;
}
if (cfcount <= 1)
device_delete_child(device_get_parent(cf_dev), cf_dev);
free(devs, M_TEMP);
return (0);
}
int
cpufreq_settings_changed(device_t dev)
{
EVENTHANDLER_INVOKE(cpufreq_levels_changed,
device_get_unit(device_get_parent(dev)));
return (0);
}