freebsd-dev/sys/dev/mmc/mmcsd.c
Alexander Motin 58bb626051 Use GB suffix only from 10GB instead of 1GB.
There are lot of cards with uneven sizes and too strong rounding
will lead to very significant rounding errors.

Reviewed by:	imp@
2008-10-12 19:19:26 +00:00

359 lines
10 KiB
C

/*-
* Copyright (c) 2006 Bernd Walter. All rights reserved.
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Portions of this software may have been developed with reference to
* the SD Simplified Specification. The following disclaimer may apply:
*
* The following conditions apply to the release of the simplified
* specification ("Simplified Specification") by the SD Card Association and
* the SD Group. The Simplified Specification is a subset of the complete SD
* Specification which is owned by the SD Card Association and the SD
* Group. This Simplified Specification is provided on a non-confidential
* basis subject to the disclaimers below. Any implementation of the
* Simplified Specification may require a license from the SD Card
* Association, SD Group, SD-3C LLC or other third parties.
*
* Disclaimers:
*
* The information contained in the Simplified Specification is presented only
* as a standard specification for SD Cards and SD Host/Ancillary products and
* is provided "AS-IS" without any representations or warranties of any
* kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD
* Card Association for any damages, any infringements of patents or other
* right of the SD Group, SD-3C LLC, the SD Card Association or any third
* parties, which may result from its use. No license is granted by
* implication, estoppel or otherwise under any patent or other rights of the
* SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing
* herein shall be construed as an obligation by the SD Group, the SD-3C LLC
* or the SD Card Association to disclose or distribute any technical
* information, know-how or other confidential information to any third party.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <geom/geom_disk.h>
#include <dev/mmc/mmcvar.h>
#include <dev/mmc/mmcreg.h>
#include "mmcbus_if.h"
struct mmcsd_softc {
device_t dev;
struct mtx sc_mtx;
struct disk *disk;
struct proc *p;
struct bio_queue_head bio_queue;
int running;
};
#define MULTI_BLOCK_BROKEN
/* bus entry points */
static int mmcsd_probe(device_t dev);
static int mmcsd_attach(device_t dev);
static int mmcsd_detach(device_t dev);
/* disk routines */
static int mmcsd_open(struct disk *dp);
static int mmcsd_close(struct disk *dp);
static void mmcsd_strategy(struct bio *bp);
static void mmcsd_task(void *arg);
static const char *mmcsd_card_name(device_t dev);
static int mmcsd_bus_bit_width(device_t dev);
#define MMCSD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define MMCSD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define MMCSD_LOCK_INIT(_sc) \
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->dev), \
"mmcsd", MTX_DEF)
#define MMCSD_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
#define MMCSD_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
#define MMCSD_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
static int
mmcsd_probe(device_t dev)
{
device_quiet(dev);
device_set_desc(dev, "MMC/SD Memory Card");
return (0);
}
static int
mmcsd_attach(device_t dev)
{
struct mmcsd_softc *sc;
struct disk *d;
intmax_t mb;
char unit;
sc = device_get_softc(dev);
sc->dev = dev;
MMCSD_LOCK_INIT(sc);
d = sc->disk = disk_alloc();
d->d_open = mmcsd_open;
d->d_close = mmcsd_close;
d->d_strategy = mmcsd_strategy;
// d->d_dump = mmcsd_dump; Need polling mmc layer
d->d_name = "mmcsd";
d->d_drv1 = sc;
d->d_maxsize = MAXPHYS; /* Maybe ask bridge? */
d->d_sectorsize = mmc_get_sector_size(dev);
d->d_mediasize = mmc_get_media_size(dev) * d->d_sectorsize;
d->d_unit = device_get_unit(dev);
/*
* Display in most natural units. There's no cards < 1MB.
* The SD standard goes to 2GiB, but the data format supports
* up to 4GiB and some card makers push it up to this limit.
* The SDHC standard only goes to 32GiB (the data format in
* SDHC is good to 2TiB however, which isn't too ugly at
* 2048GiBm, so we note it in passing here and don't add the
* code to print TiB).
*/
mb = d->d_mediasize >> 20; /* 1MiB == 1 << 20 */
unit = 'M';
if (mb >= 10240) { /* 1GiB = 1024 MiB */
unit = 'G';
mb /= 1024;
}
device_printf(dev, "%ju%cB <%s Memory Card>%s at %s %dMHz/%dbit\n",
mb, unit, mmcsd_card_name(dev),
mmc_get_read_only(dev) ? " (read-only)" : "",
device_get_nameunit(device_get_parent(dev)),
mmc_get_tran_speed(dev) / 1000000, mmcsd_bus_bit_width(dev));
disk_create(d, DISK_VERSION);
bioq_init(&sc->bio_queue);
sc->running = 1;
kproc_create(&mmcsd_task, sc, &sc->p, 0, 0, "task: mmc/sd card");
return (0);
}
static int
mmcsd_detach(device_t dev)
{
struct mmcsd_softc *sc = device_get_softc(dev);
/* kill thread */
MMCSD_LOCK(sc);
sc->running = 0;
wakeup(sc);
MMCSD_UNLOCK(sc);
/* wait for thread to finish. XXX probably want timeout. -sorbo */
MMCSD_LOCK(sc);
while (sc->running != -1)
msleep(sc, &sc->sc_mtx, PRIBIO, "detach", 0);
MMCSD_UNLOCK(sc);
/* kill disk */
disk_destroy(sc->disk);
/* XXX destroy anything in queue */
MMCSD_LOCK_DESTROY(sc);
return (0);
}
static int
mmcsd_open(struct disk *dp)
{
return (0);
}
static int
mmcsd_close(struct disk *dp)
{
return (0);
}
static void
mmcsd_strategy(struct bio *bp)
{
struct mmcsd_softc *sc;
sc = (struct mmcsd_softc *)bp->bio_disk->d_drv1;
MMCSD_LOCK(sc);
bioq_disksort(&sc->bio_queue, bp);
wakeup(sc);
MMCSD_UNLOCK(sc);
}
static void
mmcsd_task(void *arg)
{
struct mmcsd_softc *sc = (struct mmcsd_softc*)arg;
struct bio *bp;
int sz;
daddr_t block, end;
struct mmc_command cmd;
struct mmc_command stop;
struct mmc_request req;
struct mmc_data data;
device_t dev;
dev = sc->dev;
while (sc->running) {
MMCSD_LOCK(sc);
do {
bp = bioq_first(&sc->bio_queue);
if (bp == NULL)
msleep(sc, &sc->sc_mtx, PRIBIO, "jobqueue", 0);
} while (bp == NULL && sc->running);
if (bp)
bioq_remove(&sc->bio_queue, bp);
MMCSD_UNLOCK(sc);
if (!sc->running)
break;
// printf("mmc_task: request %p for block %ju\n", bp, bp->bio_pblkno);
if (bp->bio_cmd != BIO_READ && mmc_get_read_only(dev)) {
bp->bio_error = EROFS;
bp->bio_resid = bp->bio_bcount;
bp->bio_flags |= BIO_ERROR;
biodone(bp);
continue;
}
MMCBUS_ACQUIRE_BUS(device_get_parent(dev), dev);
sz = sc->disk->d_sectorsize;
end = bp->bio_pblkno + (bp->bio_bcount / sz);
for (block = bp->bio_pblkno; block < end;) {
char *vaddr = bp->bio_data + (block - bp->bio_pblkno) * sz;
int numblocks;
#ifdef MULTI_BLOCK
numblocks = end - block;
#else
numblocks = 1;
#endif
memset(&req, 0, sizeof(req));
memset(&cmd, 0, sizeof(cmd));
memset(&stop, 0, sizeof(stop));
req.cmd = &cmd;
cmd.data = &data;
if (bp->bio_cmd == BIO_READ) {
if (numblocks > 1)
cmd.opcode = MMC_READ_MULTIPLE_BLOCK;
else
cmd.opcode = MMC_READ_SINGLE_BLOCK;
} else {
if (numblocks > 1)
cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK;
else
cmd.opcode = MMC_WRITE_BLOCK;
}
cmd.arg = block;
if (!mmc_get_high_cap(dev))
cmd.arg <<= 9;
cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
data.data = vaddr;
data.mrq = &req;
if (bp->bio_cmd == BIO_READ)
data.flags = MMC_DATA_READ;
else
data.flags = MMC_DATA_WRITE;
data.len = numblocks * sz;
if (numblocks > 1) {
data.flags |= MMC_DATA_MULTI;
stop.opcode = MMC_STOP_TRANSMISSION;
stop.arg = 0;
stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
req.stop = &stop;
}
// printf("Len %d %lld-%lld flags %#x sz %d\n",
// (int)data.len, (long long)block, (long long)end, data.flags, sz);
MMCBUS_WAIT_FOR_REQUEST(device_get_parent(dev), dev,
&req);
if (req.cmd->error != MMC_ERR_NONE)
break;
block += numblocks;
}
MMCBUS_RELEASE_BUS(device_get_parent(dev), dev);
if (block < end) {
bp->bio_error = EIO;
bp->bio_resid = (end - block) * sz;
bp->bio_flags |= BIO_ERROR;
}
biodone(bp);
}
/* tell parent we're done */
MMCSD_LOCK(sc);
sc->running = -1;
wakeup(sc);
MMCSD_UNLOCK(sc);
kproc_exit(0);
}
static const char *
mmcsd_card_name(device_t dev)
{
if (mmc_get_card_type(dev) == mode_mmc)
return ("MMC");
if (mmc_get_high_cap(dev))
return ("SDHC");
return ("SD");
}
static int
mmcsd_bus_bit_width(device_t dev)
{
if (mmc_get_bus_width(dev) == bus_width_1)
return (1);
if (mmc_get_bus_width(dev) == bus_width_4)
return (4);
return (8);
}
static device_method_t mmcsd_methods[] = {
DEVMETHOD(device_probe, mmcsd_probe),
DEVMETHOD(device_attach, mmcsd_attach),
DEVMETHOD(device_detach, mmcsd_detach),
{0, 0},
};
static driver_t mmcsd_driver = {
"mmcsd",
mmcsd_methods,
sizeof(struct mmcsd_softc),
};
static devclass_t mmcsd_devclass;
DRIVER_MODULE(mmcsd, mmc, mmcsd_driver, mmcsd_devclass, 0, 0);