freebsd-dev/usr.sbin/bluetooth/hccontrol/hccontrol.8
Markus Brueffer a9f8b02b01 - Document the new Read_Node_List command, autodetection of HCI nodes and
that the '-n' parameter is now optional
- Grammar fixes

Reviewed by:	emax
Approved by:	emax
MFC after:	1 week
2006-05-22 17:58:19 +00:00

185 lines
5.4 KiB
Groff

.\" Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $Id: hccontrol.8,v 1.6 2003/08/06 21:26:38 max Exp $
.\" $FreeBSD$
.\"
.Dd June 14, 2002
.Dt HCCONTROL 8
.Os
.Sh NAME
.Nm hccontrol
.Nd HCI configuration utility
.Sh SYNOPSIS
.Nm
.Op Fl hN
.Op Fl n Ar HCI_node_name
.Ar command
.Op Ar parameters ...
.Sh DESCRIPTION
The
.Nm
utility connects to the specified Netgraph node of type
.Dv HCI
or the first one found if none is specified and attempts to send the specified
command to the HCI Netgraph node or to the associated Bluetooth device.
The
.Nm
utility will print results to the standard output and error messages to
the standard error.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl h
Display usage message and exit.
.It Fl N
Show Bluetooth addresses as numbers.
Normally
.Nm
attempts to resolve Bluetooth addresses, and display them symbolically.
.It Fl n Ar HCI_node_name
Connect to the specified HCI Netgraph node.
.It Ar command
One of the supported commands (see below).
The special command
.Cm help
can be used to obtain the list of all supported commands.
To get more information about a specific command use
.Cm help Ar command .
.It Ar parameters
One or more optional space separated command parameters.
Many commands require a remote device address as one of the parameters.
The remote device address can be specified as BD_ADDR or a name.
If a name was specified then the
.Nm
utility will attempt to resolve the name via
.Xr bt_gethostbyname 3 .
.El
.Sh COMMANDS
The currently supported HCI commands in
.Nm
are:
.Pp
.Bl -tag -offset indent -compact
.It Cm Inquiry
.It Cm Create_Connection
.It Cm Disconnect
.It Cm Add_SCO_Connection
.It Cm Change_Connection_Packet_Type
.It Cm Remote_Name_Request
.It Cm Read_Remote_Supported_Features
.It Cm Read_Remote_Version_Information
.It Cm Read_Clock_Offset
.It Cm Role_Discovery
.It Cm Switch_Role
.It Cm Read_Link_Policy_Settings
.It Cm Write_Link_Policy_Settings
.It Cm Reset
.It Cm Read_Pin_Type
.It Cm Write_Pin_Type
.It Cm Read_Stored_Link_Key
.It Cm Write_Stored_Link_Key
.It Cm Delete_Stored_Link_Key
.It Cm Change_Local_Name
.It Cm Read_Local_Name
.It Cm Read_Connection_Accept_Timeout
.It Cm Write_Connection_Accept_Timeout
.It Cm Read_Page_Timeout
.It Cm Write_Page_Timeout
.It Cm Read_Scan_Enable
.It Cm Write_Scan_Enable
.It Cm Read_Page_Scan_Activity
.It Cm Write_Page_Scan_Activity
.It Cm Read_Inquiry_Scan_Activity
.It Cm Write_Inquiry_Scan_Activity
.It Cm Read_Authentication_Enable
.It Cm Write_Authentication_Enable
.It Cm Read_Encryption_Mode
.It Cm Write_Encryption_Mode
.It Cm Read_Class_Of_Device
.It Cm Write_Class_Of_Device
.It Cm Read_Voice_Settings
.It Cm Write_Voice_Settings
.It Cm Read_Number_Broadcast_Retransmissions
.It Cm Write_Number_Broadcast_Retransmissions
.It Cm Read_Hold_Mode_Activity
.It Cm Write_Hold_Mode_Activity
.It Cm Read_SCO_Flow_Control_Enable
.It Cm Write_SCO_Flow_Control_Enable
.It Cm Read_Link_Supervision_Timeout
.It Cm Write_Link_Supervision_Timeout
.It Cm Read_Page_Scan_Period_Mode
.It Cm Write_Page_Scan_Period_Mode
.It Cm Read_Page_Scan_Mode
.It Cm Write_Page_Scan_Mode
.It Cm Read_Local_Version_Information
.It Cm Read_Local_Supported_Features
.It Cm Read_Buffer_Size
.It Cm Read_Country_Code
.It Cm Read_BD_ADDR
.It Cm Read_Failed_Contact_Counter
.It Cm Reset_Failed_Contact_Counter
.It Cm Get_Link_Quality
.It Cm Read_RSSI
.El
.Pp
The currently supported node commands in
.Nm
are:
.Pp
.Bl -tag -offset indent -compact
.It Cm Read_Node_State
.It Cm Initialize
.It Cm Read_Debug_Level
.It Cm Write_Debug_Level
.It Cm Read_Node_Buffer_Size
.It Cm Read_Node_BD_ADDR
.It Cm Read_Node_Features
.It Cm Read_Node_Stat
.It Cm Reset_Node_Stat
.It Cm Flush_Neighbor_Cache
.It Cm Read_Neighbor_Cache
.It Cm Read_Connection_List
.It Cm Read_Node_Link_Policy_Settings_Mask
.It Cm Write_Node_Link_Policy_Settings_Mask
.It Cm Read_Node_Packet_Mask
.It Cm Write_Node_Packet_Mask
.It Cm Read_Node_Role_Switch
.It Cm Write_Node_Role_Switch
.It Cm Read_Node_List
.El
.Sh EXIT STATUS
.Ex -std
.Sh SEE ALSO
.Xr bluetooth 3 ,
.Xr netgraph 3 ,
.Xr netgraph 4 ,
.Xr ng_hci 4 ,
.Xr hcseriald 8
.Sh AUTHORS
.An Maksim Yevmenkin Aq m_evmenkin@yahoo.com
.Sh BUGS
Most likely.
Please report if found.