d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5ad7e64900
freebsd-dev/sys/dev/mps/mpi/mpi2_raid.h
Kenneth D. Merry be4aa869c1 Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version 
14.00.00.01-fbsd.

Their description of the changes is as follows:

1.	Copyright contents has been changed in all respective .c
	and .h files

2.	Support for WRITE12 and READ12 for direct-io (warpdrive only)
	has been added.

3.      Driver has added checks to see if Drive has READ_CAP_16
	support before sending it down to the device.
	If SPC3_SID_PROTECT flag is set in the inquiry data, the
	device supports protection information, and must support
	the 16 byte read capacity command, otherwise continue without
	sending read cap 16. This will optimize driver performance,
	since it will not send READ_CAP_16 to the drive which does
	not have support of READ_CAP_16.

4.      With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
	use DELAY() which is busy loop implementation.
	It will use <msleep> (Better way to sleep without busy
	loop). Also from the HBA reset code path and some other
	places, DELAY() is replaced with msleep() or "pause()",
	which is based on sleep/wakeup style calls.  Driver use
	msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
	flags to avoid busy loop which is not required all the
	time.e.a

	a. While driver is getting loaded, driver calls most of the
	   commands with NO_SLEEP.
	b. When Driver is functional and it needs Reinit of HBA,
	   CAN_SLEEP flag is used.

5.	<mpslsi> driver is not Endian safe. It will not work on Big
	Endian machines	like Sparc and PowerPC platforms because it
	assumes it is running on a Little Endian machine.

	Driver code is modified such way that it does not assume CPU
	arch is Little Endian.
	a. All places where Driver interacts from HBA to Host, it
	   converts Little Endian format to CPU format.
	b. All places where Driver interacts from Host to HBA, it
	   converts CPU format to Little Endian.

6.	Findout memory leaks in FreeBSD Driver and resolve those,
	such as memory leak in targ's luns creation/deletion.
	Also added additional checks to see memory allocation
	success/fail.

7.	Add loginfo prints as debug message, i.e. When FW sends any
	loginfo, Driver should print those as debug message.
	This will help for debugging purpose.

8.	There is possibility to get config request timeout. Current
	driver is able to detect config request timetout, but it does
	not do anything on config_request timeout.  Driver should
	call mps_reinit() if any request_poll (which is called as
	part of config_request) is time out.

9.	cdb length check is required for 32 byte CDB. Add correct mpi
	control value for 32 bit CDB as below while submitting SCSI IO
	Request to controller.
	mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;

10.	Check the actual status of Message unit reset
	(mps_message_unit_reset).Previously FreeBSD Driver just writes
	MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
	(it just wait for 50 millisecond).  So, Driver now check the
	status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
	it to the FW.

	Now it also checking for whether doorbell ack uses msleep with
	proper sleep flags, instead of <DELAY>.

11.	Previously CAM does not detect Multi-Lun Devices. In order to
	detect Multi-Lun Devices by CAM the driver needs following change
	set:
	a. There is "max_lun" field which Driver need to set based on
	   hw/fw support. Currently LSI released driver does not set
	   this field.
	b. Default of "max_lun" should not be 0 in OS, but it is
	   currently set to 0 in CAM layer.
	c. Export max_lun capacity to 255

12.	Driver will not reset target info after port enable complete and
	also do Device removal when Device remove from FW.  The detail
	description is as follows
	a. When Driver receive WD PD add events, it will add all
	   information in driver local data structure.
	b. Only for WD, we have below checks after port enable
	   completes, where driver clear off all information retrieved
	   at #1.
	if ((sc->WD_available &&
             (sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
             (sc->WD_valid_config && (sc->WD_hide_expose ==
                            MPS_WD_HIDE_IF_VOLUME)) {
		  // clear off target data structure.
	}
	It is mainly not to attach PDs to OS.

	FreeBSD does bus rescan as older Parallel scsi style. So Driver
	needs to handle which Drive is visible to OS.  That is a reason
	we have to clear off targ information for PDs.

	Again, above logic was implemented long time ago. Similar concept
	we have for non-wd also. For that, LSI have introduced different
	logic to hide PDs.

	Eventually, because of above gap, when Phy goes offline, we
	observe below failure. That is what Driver is not doing complete
	removal of device with FW. (which was pointed by Scott)
	Apr  5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
	Apr  5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe

	Now Driver will not reset target info after port enable complete
	and also will do Device removal when Device remove from FW.

13.	Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
	error code on request to the Target IDs that have no devices
	conected at that moment.  As if "CAM_TID_INVALID" error code
	is returned to the CAM Layaer then it results in a huge chain
	of errors in verbose kernel messages on boot and every
	hot-plug event.

Submitted by:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after:	3 days
2012-06-28 03:48:54 +00:00

334 lines
15 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011, 2012 LSI Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* LSI MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2000-2012 LSI Corporation.
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
* mpi2_raid.h Version: 02.00.05
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 08-31-07 02.00.01 Modifications to RAID Action request and reply,
* including the Actions and ActionData.
* 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
* can be sized by the build environment.
* 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
* VolumeCreationFlags and marked the old one as obsolete.
* 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_RAID_H
#define MPI2_RAID_H
/*****************************************************************************
*
* Integrated RAID Messages
*
*****************************************************************************/
/****************************************************************************
* RAID Action messages
****************************************************************************/
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001)
/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
typedef struct _MPI2_RAID_ACTION_RATE_DATA
{
U8 RateToChange; /* 0x00 */
U8 RateOrMode; /* 0x01 */
U16 DataScrubDuration; /* 0x02 */
} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA,
Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t;
#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00)
#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01)
#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02)
/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION
{
U8 RAIDFunction; /* 0x00 */
U8 Flags; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_START_RAID_FUNCTION,
MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
Mpi2RaidActionStartRaidFunction_t,
MPI2_POINTER pMpi2RaidActionStartRaidFunction_t;
/* defines for the RAIDFunction field */
#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00)
#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02)
/* defines for the Flags field */
#define MPI2_RAID_ACTION_START_NEW (0x00)
#define MPI2_RAID_ACTION_START_RESUME (0x01)
/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION
{
U8 RAIDFunction; /* 0x00 */
U8 Flags; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
Mpi2RaidActionStopRaidFunction_t,
MPI2_POINTER pMpi2RaidActionStopRaidFunction_t;
/* defines for the RAIDFunction field */
#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00)
#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01)
#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02)
/* defines for the Flags field */
#define MPI2_RAID_ACTION_STOP_ABORT (0x00)
#define MPI2_RAID_ACTION_STOP_PAUSE (0x01)
/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
typedef struct _MPI2_RAID_ACTION_HOT_SPARE
{
U8 HotSparePool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 DevHandle; /* 0x02 */
} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE,
Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t;
/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE
{
U8 Flags; /* 0x00 */
U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_FW_UPDATE_MODE,
MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t;
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00)
#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01)
typedef union _MPI2_RAID_ACTION_DATA
{
U32 Word;
MPI2_RAID_ACTION_RATE_DATA Rates;
MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
MPI2_RAID_ACTION_HOT_SPARE HotSpare;
MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA,
Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t;
/* RAID Action Request Message */
typedef struct _MPI2_RAID_ACTION_REQUEST
{
U8 Action; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 VolDevHandle; /* 0x04 */
U8 PhysDiskNum; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U32 Reserved3; /* 0x0C */
MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */
MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */
} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST,
Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t;
/* RAID Action request Action values */
#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01)
#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02)
#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03)
#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04)
#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05)
#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F)
#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11)
#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17)
#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18)
#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19)
#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C)
#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D)
#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E)
#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20)
#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21)
#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22)
/* RAID Volume Creation Structure */
/*
* The following define can be customized for the targeted product.
*/
#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1)
#endif
typedef struct _MPI2_RAID_VOLUME_PHYSDISK
{
U8 RAIDSetNum; /* 0x00 */
U8 PhysDiskMap; /* 0x01 */
U16 PhysDiskDevHandle; /* 0x02 */
} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK,
Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t;
/* defines for the PhysDiskMap field */
#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01)
#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02)
typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT
{
U8 NumPhysDisks; /* 0x00 */
U8 VolumeType; /* 0x01 */
U16 Reserved1; /* 0x02 */
U32 VolumeCreationFlags; /* 0x04 */
U32 VolumeSettings; /* 0x08 */
U8 Reserved2; /* 0x0C */
U8 ResyncRate; /* 0x0D */
U16 DataScrubDuration; /* 0x0E */
U64 VolumeMaxLBA; /* 0x10 */
U32 StripeSize; /* 0x18 */
U8 Name[16]; /* 0x1C */
MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */
} MPI2_RAID_VOLUME_CREATION_STRUCT,
MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t;
/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
/* defines for the VolumeCreationFlags field */
#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
/* The following is an obsolete define.
* It must be shifted left 24 bits in order to set the proper bit.
*/
#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
/* RAID Online Capacity Expansion Structure */
typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION
{
U32 Flags; /* 0x00 */
U16 DevHandle0; /* 0x04 */
U16 Reserved1; /* 0x06 */
U16 DevHandle1; /* 0x08 */
U16 Reserved2; /* 0x0A */
} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
Mpi2RaidOnlineCapacityExpansion_t,
MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t;
/* RAID Volume Indicator Structure */
typedef struct _MPI2_RAID_VOL_INDICATOR
{
U64 TotalBlocks; /* 0x00 */
U64 BlocksRemaining; /* 0x08 */
U32 Flags; /* 0x10 */
} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR,
Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t;
/* defines for RAID Volume Indicator Flags field */
#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002)
#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003)
#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004)
/* RAID Action Reply ActionData union */
typedef union _MPI2_RAID_ACTION_REPLY_DATA
{
U32 Word[5];
MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
U16 VolDevHandle;
U8 VolumeState;
U8 PhysDiskNum;
} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA,
Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t;
/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
/* RAID Action Reply Message */
typedef struct _MPI2_RAID_ACTION_REPLY
{
U8 Action; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 VolDevHandle; /* 0x04 */
U8 PhysDiskNum; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U16 Reserved3; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */
} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY,
Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t;
#endif
Reference in New Issue View Git Blame Copy Permalink