7a79cebfba
connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
294 lines
7.4 KiB
C
294 lines
7.4 KiB
C
/*-
|
|
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2007-2009 Marvell Semiconductor, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
|
|
* redistribution must be conditioned upon including a substantially
|
|
* similar Disclaimer requirement for further binary redistribution.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
#ifdef __FreeBSD__
|
|
__FBSDID("$FreeBSD$");
|
|
#endif
|
|
|
|
/*
|
|
* PCI front-end for the Marvell Wireless LAN controller driver.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/module.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/errno.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/route.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <dev/mwl/if_mwlvar.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
/*
|
|
* PCI glue.
|
|
*/
|
|
|
|
struct mwl_pci_softc {
|
|
struct mwl_softc sc_sc;
|
|
struct resource *sc_sr0; /* BAR0 memory resource */
|
|
struct resource *sc_sr1; /* BAR1 memory resource */
|
|
struct resource *sc_irq; /* irq resource */
|
|
void *sc_ih; /* interrupt handler */
|
|
};
|
|
|
|
#define BS_BAR0 0x10
|
|
#define BS_BAR1 0x14
|
|
|
|
struct mwl_pci_ident {
|
|
uint16_t vendor;
|
|
uint16_t device;
|
|
const char *name;
|
|
};
|
|
|
|
static const struct mwl_pci_ident mwl_pci_ids[] = {
|
|
{ 0x11ab, 0x2a02, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a03, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a0a, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a0b, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a0c, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a21, "Marvell 88W8363" },
|
|
{ 0x11ab, 0x2a24, "Marvell 88W8363" },
|
|
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
const static struct mwl_pci_ident *
|
|
mwl_pci_lookup(int vendor, int device)
|
|
{
|
|
const struct mwl_pci_ident *ident;
|
|
|
|
for (ident = mwl_pci_ids; ident->name != NULL; ident++)
|
|
if (vendor == ident->vendor && device == ident->device)
|
|
return ident;
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
mwl_pci_probe(device_t dev)
|
|
{
|
|
const struct mwl_pci_ident *ident;
|
|
|
|
ident = mwl_pci_lookup(pci_get_vendor(dev), pci_get_device(dev));
|
|
if (ident != NULL) {
|
|
device_set_desc(dev, ident->name);
|
|
return BUS_PROBE_DEFAULT;
|
|
}
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
mwl_pci_attach(device_t dev)
|
|
{
|
|
struct mwl_pci_softc *psc = device_get_softc(dev);
|
|
struct mwl_softc *sc = &psc->sc_sc;
|
|
int rid, error = ENXIO;
|
|
|
|
sc->sc_dev = dev;
|
|
|
|
pci_enable_busmaster(dev);
|
|
|
|
/*
|
|
* Setup memory-mapping of PCI registers.
|
|
*/
|
|
rid = BS_BAR0;
|
|
psc->sc_sr0 = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (psc->sc_sr0 == NULL) {
|
|
device_printf(dev, "cannot map BAR0 register space\n");
|
|
goto bad;
|
|
}
|
|
rid = BS_BAR1;
|
|
psc->sc_sr1 = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (psc->sc_sr1 == NULL) {
|
|
device_printf(dev, "cannot map BAR1 register space\n");
|
|
goto bad1;
|
|
}
|
|
sc->sc_invalid = 1;
|
|
|
|
/*
|
|
* Arrange interrupt line.
|
|
*/
|
|
rid = 0;
|
|
psc->sc_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE|RF_ACTIVE);
|
|
if (psc->sc_irq == NULL) {
|
|
device_printf(dev, "could not map interrupt\n");
|
|
goto bad2;
|
|
}
|
|
if (bus_setup_intr(dev, psc->sc_irq,
|
|
INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, mwl_intr, sc, &psc->sc_ih)) {
|
|
device_printf(dev, "could not establish interrupt\n");
|
|
goto bad3;
|
|
}
|
|
|
|
/*
|
|
* Setup DMA descriptor area.
|
|
*/
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
BUS_SPACE_MAXSIZE, /* maxsize */
|
|
MWL_TXDESC, /* nsegments */
|
|
BUS_SPACE_MAXSIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockarg */
|
|
&sc->sc_dmat)) {
|
|
device_printf(dev, "cannot allocate DMA tag\n");
|
|
goto bad4;
|
|
}
|
|
|
|
/*
|
|
* Finish off the attach.
|
|
*/
|
|
MWL_LOCK_INIT(sc);
|
|
sc->sc_io0t = rman_get_bustag(psc->sc_sr0);
|
|
sc->sc_io0h = rman_get_bushandle(psc->sc_sr0);
|
|
sc->sc_io1t = rman_get_bustag(psc->sc_sr1);
|
|
sc->sc_io1h = rman_get_bushandle(psc->sc_sr1);
|
|
if (mwl_attach(pci_get_device(dev), sc) == 0)
|
|
return (0);
|
|
|
|
MWL_LOCK_DESTROY(sc);
|
|
bus_dma_tag_destroy(sc->sc_dmat);
|
|
bad4:
|
|
bus_teardown_intr(dev, psc->sc_irq, psc->sc_ih);
|
|
bad3:
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, psc->sc_irq);
|
|
bad2:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR1, psc->sc_sr1);
|
|
bad1:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR0, psc->sc_sr0);
|
|
bad:
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
mwl_pci_detach(device_t dev)
|
|
{
|
|
struct mwl_pci_softc *psc = device_get_softc(dev);
|
|
struct mwl_softc *sc = &psc->sc_sc;
|
|
|
|
/* check if device was removed */
|
|
sc->sc_invalid = !bus_child_present(dev);
|
|
|
|
mwl_detach(sc);
|
|
|
|
bus_generic_detach(dev);
|
|
bus_teardown_intr(dev, psc->sc_irq, psc->sc_ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, psc->sc_irq);
|
|
|
|
bus_dma_tag_destroy(sc->sc_dmat);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR1, psc->sc_sr1);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR0, psc->sc_sr0);
|
|
|
|
MWL_LOCK_DESTROY(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mwl_pci_shutdown(device_t dev)
|
|
{
|
|
struct mwl_pci_softc *psc = device_get_softc(dev);
|
|
|
|
mwl_shutdown(&psc->sc_sc);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mwl_pci_suspend(device_t dev)
|
|
{
|
|
struct mwl_pci_softc *psc = device_get_softc(dev);
|
|
|
|
mwl_suspend(&psc->sc_sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mwl_pci_resume(device_t dev)
|
|
{
|
|
struct mwl_pci_softc *psc = device_get_softc(dev);
|
|
|
|
pci_enable_busmaster(dev);
|
|
|
|
mwl_resume(&psc->sc_sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t mwl_pci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mwl_pci_probe),
|
|
DEVMETHOD(device_attach, mwl_pci_attach),
|
|
DEVMETHOD(device_detach, mwl_pci_detach),
|
|
DEVMETHOD(device_shutdown, mwl_pci_shutdown),
|
|
DEVMETHOD(device_suspend, mwl_pci_suspend),
|
|
DEVMETHOD(device_resume, mwl_pci_resume),
|
|
|
|
{ 0,0 }
|
|
};
|
|
static driver_t mwl_pci_driver = {
|
|
"mwl",
|
|
mwl_pci_methods,
|
|
sizeof (struct mwl_pci_softc)
|
|
};
|
|
static devclass_t mwl_devclass;
|
|
DRIVER_MODULE(mwl, pci, mwl_pci_driver, mwl_devclass, 0, 0);
|
|
MODULE_VERSION(mwl, 1);
|
|
MODULE_DEPEND(mwl, wlan, 1, 1, 1); /* 802.11 media layer */
|
|
MODULE_DEPEND(mwl, firmware, 1, 1, 1);
|