freebsd-dev/usr.sbin/ppp/vars.h
Brian Somers 5b8b8060c1 Move the dial, login and hangup scripts into struct datalink.
Don't set these scripts in -direct mode.
Always set reconnect_tries to zero for -direct mode.
1998-02-16 19:10:03 +00:00

204 lines
7.6 KiB
C

/*
* Written by Toshiharu OHNO (tony-o@iij.ad.jp)
*
* Copyright (C) 1993, Internet Initiative Japan, Inc. All rights reserverd.
*
* Redistribution and use in source and binary forms are permitted
* provided that the above copyright notice and this paragraph are
* duplicated in all such forms and that any documentation,
* advertising materials, and other materials related to such
* distribution and use acknowledge that the software was developed
* by the Internet Initiative Japan. The name of the
* IIJ may not be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* $Id: vars.h,v 1.42.2.4 1998/02/16 00:01:12 brian Exp $
*
* TODO:
*/
struct confdesc {
const char *name;
int myside, hisside;
};
#define CONF_NONE -1
#define CONF_DISABLE 0
#define CONF_ENABLE 1
#define CONF_DENY 0
#define CONF_ACCEPT 1
#define ConfAcfcomp 0
#define ConfChap 1
#define ConfDeflate 2
#define ConfLqr 3
#define ConfPap 4
#define ConfPppdDeflate 5
#define ConfPred1 6
#define ConfProtocomp 7
#define ConfVjcomp 8
#define ConfMSExt 9
#define ConfPasswdAuth 10
#define ConfProxy 11
#define ConfThroughput 12
#define ConfUtmp 13
#define MAXCONFS 14
#define Enabled(x) (pppConfs[x].myside & CONF_ENABLE)
#define Acceptable(x) (pppConfs[x].hisside & CONF_ACCEPT)
extern struct confdesc pppConfs[MAXCONFS + 1];
struct pppvars {
u_short var_mru; /* Initial MRU value */
u_short pref_mtu; /* Preferred MTU value */
int var_accmap; /* Initial ACCMAP value */
int modem_speed; /* Current modem speed */
int modem_parity; /* Parity setting */
int modem_ctsrts; /* Use CTS/RTS on modem port? (boolean) */
int idle_timeout; /* Idle timeout value */
int lqr_timeout; /* LQR timeout value */
int retry_timeout; /* Retry timeout value */
int reconnect_timer; /* Timeout before reconnect on carrier loss */
int reconnect_tries; /* Attempt reconnect on carrier loss */
int redial_timeout; /* Redial timeout value */
int redial_next_timeout; /* Redial next timeout value */
int dial_tries; /* Dial attempts before giving up, 0 == inf */
int loopback; /* Turn around packets addressed to me */
char modem_devlist[LINE_LEN]; /* Comma-separated list of devices */
char modem_dev[40]; /* Name of device / host:port */
const char *base_modem_dev; /* Pointer to base of modem_dev */
int open_mode; /* Delay before first LCP REQ (-1 = passive) */
#define LOCAL_AUTH 0x01
#define LOCAL_NO_AUTH 0x02
#define LOCAL_DENY 0x03
u_char lauth; /* Local Authorized status */
/* The rest are just default initialized in vars.c */
#define DIALUP_REQ 0x01
#define DIALUP_DONE 0x02
char auth_key[50]; /* PAP/CHAP key */
char auth_name[50]; /* PAP/CHAP system name */
char local_auth_key[50]; /* Local auth passwd */
int have_local_auth_key; /* Local auth passwd specified ? */
#ifdef HAVE_DES
int use_MSChap; /* Use MSCHAP encryption */
#endif
char phone_numbers[200]; /* Telephone Numbers */
char phone_copy[200]; /* copy for strsep() */
char *next_phone; /* Next phone from the list */
char *alt_phone; /* Next phone from the list */
char shostname[MAXHOSTNAMELEN]; /* Local short Host Name */
struct aliasHandlers handler; /* Alias function pointers */
};
#define VarAccmap pppVars.var_accmap
#define VarMRU pppVars.var_mru
#define VarPrefMTU pppVars.pref_mtu
#define VarDevice pppVars.modem_dev
#define VarDeviceList pppVars.modem_devlist
#define VarBaseDevice pppVars.base_modem_dev
#if 0
# define VarSpeed pppVars.modem_speed
# define VarParity pppVars.modem_parity
# define VarCtsRts pppVars.modem_ctsrts
#endif
#define VarOpenMode pppVars.open_mode
#define VarLocalAuth pppVars.lauth
#define VarIdleTimeout pppVars.idle_timeout
#define VarLqrTimeout pppVars.lqr_timeout
#define VarRetryTimeout pppVars.retry_timeout
#define VarAuthKey pppVars.auth_key
#define VarAuthName pppVars.auth_name
#define VarLocalAuthKey pppVars.local_auth_key
#define VarHaveLocalAuthKey pppVars.have_local_auth_key
#ifdef HAVE_DES
#define VarMSChap pppVars.use_MSChap
#endif
#define VarPhoneList pppVars.phone_numbers
#define VarPhoneCopy pppVars.phone_copy
#define VarNextPhone pppVars.next_phone
#define VarAltPhone pppVars.alt_phone
#define VarShortHost pppVars.shostname
#define VarReconnectTimer pppVars.reconnect_timer
#define VarReconnectTries pppVars.reconnect_tries
#define VarRedialTimeout pppVars.redial_timeout
#define VarRedialNextTimeout pppVars.redial_next_timeout
#define VarDialTries pppVars.dial_tries
#define VarLoopback pppVars.loopback
#define VarAliasHandlers pppVars.handler
#define VarPacketAliasGetFragment (*pppVars.handler.PacketAliasGetFragment)
#define VarPacketAliasGetFragment (*pppVars.handler.PacketAliasGetFragment)
#define VarPacketAliasInit (*pppVars.handler.PacketAliasInit)
#define VarPacketAliasIn (*pppVars.handler.PacketAliasIn)
#define VarPacketAliasOut (*pppVars.handler.PacketAliasOut)
#define VarPacketAliasRedirectAddr (*pppVars.handler.PacketAliasRedirectAddr)
#define VarPacketAliasRedirectPort (*pppVars.handler.PacketAliasRedirectPort)
#define VarPacketAliasSaveFragment (*pppVars.handler.PacketAliasSaveFragment)
#define VarPacketAliasSetAddress (*pppVars.handler.PacketAliasSetAddress)
#define VarPacketAliasSetMode (*pppVars.handler.PacketAliasSetMode)
#define VarPacketAliasFragmentIn (*pppVars.handler.PacketAliasFragmentIn)
#define DEV_IS_SYNC (VarSpeed == 0)
extern struct pppvars pppVars;
extern char VarVersion[];
extern char VarLocalVersion[];
extern int Utmp; /* Are we in /etc/utmp ? */
extern int ipKeepAlive;
#if 0
extern int reconnectState;
extern int reconnectCount;
#define RECON_TRUE (1)
#define RECON_FALSE (2)
#define RECON_UNKNOWN (3)
#define RECON_ENVOKED (4)
#define reconnect(x) \
do \
if (reconnectState == RECON_UNKNOWN) { \
reconnectState = x; \
if (x == RECON_FALSE) \
reconnectCount = 0; \
} \
while(0)
/*
* This is the logic behind the reconnect variables:
* We have four reconnect "states". We start off not requiring anything
* from the reconnect code (reconnectState == RECON_UNKNOWN). If the
* line is brought down (via LcpClose() or LcpDown()), we have to decide
* whether to set to RECON_TRUE or RECON_FALSE. It's only here that we
* know the correct action. Once we've decided, we don't want that
* decision to be overridden (hence the above reconnect() macro) - If we
* call LcpClose, the ModemTimeout() still gets to "notice" that the line
* is down. When it "notice"s, it should only set RECON_TRUE if a decision
* hasn't already been made.
*
* In main.c, when we notice we have RECON_TRUE, we must only action
* it once. The fourth "state" is where we're bringing the line up,
* but if we call LcpClose for any reason (failed PAP/CHAP etc) we
* don't want to set to RECON_{TRUE,FALSE}.
*
* If we get a connection or give up dialing, we go back to RECON_UNKNOWN.
* If we get give up dialing or reconnecting or if we chose to down the
* connection, we set reconnectCount back to zero.
*
*/
#endif
extern int EnableCommand(struct cmdargs const *);
extern int DisableCommand(struct cmdargs const *);
extern int AcceptCommand(struct cmdargs const *);
extern int DenyCommand(struct cmdargs const *);
extern int LocalAuthCommand(struct cmdargs const *);
extern int DisplayCommand(struct cmdargs const *);