..
common
cxgbe(4): Completely ignore all top level interrupts that are not enabled.
2019-07-12 20:59:10 +00:00
crypto
Add support for AES-CCM to ccr(4).
2019-04-24 23:31:46 +00:00
cudbg
cxgbe(4): Fix unsafe mailbox access in cudbg.
2017-11-21 01:18:58 +00:00
cxgbei
cxgbe/t4_tom: adjust the hardware receive window to match changes to the
2019-06-01 03:03:48 +00:00
firmware
cxgbe(4): Treat the viid as an opaque identifier.
2019-03-20 17:27:11 +00:00
iw_cxgbe
cxgbe/iw_cxgbe: Remove unused field from the endpoint structure.
2019-06-28 02:21:42 +00:00
tom
Fix gcc build for cxgbe(4)
2019-07-08 19:59:15 +00:00
adapter.h
This adds the third step in getting BBR into the tree. BBR and
2019-08-01 14:17:31 +00:00
if_cc.c
cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will
2016-09-16 00:08:37 +00:00
if_ccv.c
cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will
2016-09-16 00:08:37 +00:00
if_cxl.c
if_cxlv.c
Chelsio T4/T5 VF driver.
2016-09-07 18:13:57 +00:00
offload.h
cxgbe/t4_tom: Catch up with r344433, which removed tcb_autorcvbuf_inc.
2019-03-29 16:43:24 +00:00
osdep.h
cxgbe(4): Add adapter information to messages logged by the OS-agnostic
2019-01-29 00:49:12 +00:00
t4_clip.c
cxgbe(4): Do not issue mbox commands after t4_fw_bye.
2018-12-19 19:21:29 +00:00
t4_clip.h
Move CLIP table handling out of TOM and into the base driver.
2018-11-29 01:15:53 +00:00
t4_filter.c
cxgbe(4): Clear the reply-pending status of a hashfilter when the reply
2019-01-20 23:30:16 +00:00
t4_if.m
t4_ioctl.h
cxgbe(4): Allow "pass" filters to distribute matching traffic using a
2018-10-25 14:37:26 +00:00
t4_iov.c
cxgbe(4): Update the VF device ids too. This should have been part
2017-05-05 16:52:25 +00:00
t4_l2t.c
cxgbe(4): Reuse existing "switching" L2T entries when possible.
2018-09-22 01:24:30 +00:00
t4_l2t.h
cxgbe(4): Reuse existing "switching" L2T entries when possible.
2018-09-22 01:24:30 +00:00
t4_main.c
This adds the third step in getting BBR into the tree. BBR and
2019-08-01 14:17:31 +00:00
t4_mp_ring.c
cxgbe(4): Use fcmpset instead of cmpset when appropriate.
2018-08-23 16:24:27 +00:00
t4_mp_ring.h
t4_netmap.c
cxgbe: revert r309725
2018-11-28 15:29:58 +00:00
t4_sched.c
This adds the third step in getting BBR into the tree. BBR and
2019-08-01 14:17:31 +00:00
t4_sge.c
Add support for IFCAP_NOMAP to cxgbe(4).
2019-06-29 00:52:21 +00:00
t4_smt.c
cxgbe(4): Move all control queues to the adapter.
2018-08-11 21:10:08 +00:00
t4_smt.h
cxgbe(4): Retire an old check.
2018-06-01 01:05:34 +00:00
t4_tracer.c
sys/dev: further adoption of SPDX licensing ID tags.
2017-11-27 14:52:40 +00:00
t4_vf.c
cxgbev(4): Enable 32b port capabilities in the VF driver.
2019-03-02 04:39:59 +00:00