freebsd-dev/sys/dev/xilinx/axidma.h
Ruslan Bukin a8692c16c9 Fix xae(4) driver attachement on the Government Furnished Equipment (GFE)
riscv cores.

GFE cores come with standard DTS file that lacks standard 'dmas ='
property, which means xae(4) could not find a DMA controller to use.

The 'dmas' property could not be added to the DTS file because the
ethernet controller and DMA engine parts in Linux are implemented
in a single driver.

Instead of 'dmas' property the standard Xilinx 'axistream-connected'
property is provided, so fallback to use it instead.

Suggested by:	James Clarke <jrtc27@jrtc27.com>
Reviewed by:	James Clarke <jrtc27@jrtc27.com>
Sponsored by:	DARPA, AFRL
2020-02-07 14:36:28 +00:00

97 lines
4.1 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2019 Ruslan Bukin <br@bsdpad.com>
*
* This software was developed by SRI International and the University of
* Cambridge Computer Laboratory (Department of Computer Science and
* Technology) under DARPA contract HR0011-18-C-0016 ("ECATS"), as part of the
* DARPA SSITH research programme.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_XILINX_AXIDMA_H_
#define _DEV_XILINX_AXIDMA_H_
#define AXI_DMACR(n) (0x00 + 0x30 * (n)) /* DMA Control register */
#define DMACR_RS (1 << 0) /* Run / Stop. */
#define DMACR_RESET (1 << 2) /* Soft reset the AXI DMA core. */
#define DMACR_IOC_IRQEN (1 << 12) /* Interrupt on Complete (IOC) Interrupt Enable. */
#define DMACR_DLY_IRQEN (1 << 13) /* Interrupt on Delay Timer Interrupt Enable. */
#define DMACR_ERR_IRQEN (1 << 14) /* Interrupt on Error Interrupt Enable. */
#define AXI_DMASR(n) (0x04 + 0x30 * (n)) /* DMA Status register */
#define DMASR_HALTED (1 << 0)
#define DMASR_IDLE (1 << 1)
#define DMASR_SGINCLD (1 << 3) /* Scatter Gather Enabled */
#define DMASR_DMAINTERR (1 << 4) /* DMA Internal Error. */
#define DMASR_DMASLVERR (1 << 5) /* DMA Slave Error. */
#define DMASR_DMADECOREERR (1 << 6) /* Decode Error. */
#define DMASR_SGINTERR (1 << 8) /* Scatter Gather Internal Error. */
#define DMASR_SGSLVERR (1 << 9) /* Scatter Gather Slave Error. */
#define DMASR_SGDECERR (1 << 10) /* Scatter Gather Decode Error. */
#define DMASR_IOC_IRQ (1 << 12) /* Interrupt on Complete. */
#define DMASR_DLY_IRQ (1 << 13) /* Interrupt on Delay. */
#define DMASR_ERR_IRQ (1 << 14) /* Interrupt on Error. */
#define AXI_CURDESC(n) (0x08 + 0x30 * (n)) /* Current Descriptor Pointer. Lower 32 bits of the address. */
#define AXI_CURDESC_MSB(n) (0x0C + 0x30 * (n)) /* Current Descriptor Pointer. Upper 32 bits of address. */
#define AXI_TAILDESC(n) (0x10 + 0x30 * (n)) /* Tail Descriptor Pointer. Lower 32 bits. */
#define AXI_TAILDESC_MSB(n) (0x14 + 0x30 * (n)) /* Tail Descriptor Pointer. Upper 32 bits of address. */
#define AXI_SG_CTL 0x2C /* Scatter/Gather User and Cache */
#define AXIDMA_NCHANNELS 2
#define AXIDMA_DESCS_NUM 512
#define AXIDMA_TX_CHAN 0
#define AXIDMA_RX_CHAN 1
struct axidma_desc {
uint32_t next;
uint32_t reserved1;
uint32_t phys;
uint32_t reserved2;
uint32_t reserved3;
uint32_t reserved4;
uint32_t control;
#define BD_CONTROL_TXSOF (1 << 27) /* Start of Frame. */
#define BD_CONTROL_TXEOF (1 << 26) /* End of Frame. */
#define BD_CONTROL_LEN_S 0 /* Buffer Length. */
#define BD_CONTROL_LEN_M (0x3ffffff << BD_CONTROL_LEN_S)
uint32_t status;
#define BD_STATUS_CMPLT (1 << 31)
#define BD_STATUS_TRANSFERRED_S 0
#define BD_STATUS_TRANSFERRED_M (0x7fffff << BD_STATUS_TRANSFERRED_S)
uint32_t app0;
uint32_t app1;
uint32_t app2;
uint32_t app3;
uint32_t app4;
uint32_t reserved[3];
};
struct axidma_fdt_data {
int id;
};
#endif /* !_DEV_XILINX_AXIDMA_H_ */