freebsd-dev/contrib/gcc/config/i386/i386-interix.h
David E. O'Brien 1952e2e1c1 Enlist the FreeBSD-CURRENT users as testers of what is to become Gcc 3.1.0.
These bits are taken from the FSF anoncvs repo on 1-Feb-2002 08:20 PST.
2002-02-01 18:16:02 +00:00

424 lines
15 KiB
C

/* Target definitions for GNU compiler for Intel 80386 running Interix
Parts Copyright (C) 1991, 1999, 2000 Free Software Foundation, Inc.
Parts:
by Douglas B. Rupp (drupp@cs.washington.edu).
by Ron Guilmette (rfg@netcom.com).
by Donn Terry (donn@softway.com).
by Mumit Khan (khan@xraylith.wisc.edu).
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#define YES_UNDERSCORES
/* YES_UNDERSCORES must precede gas.h */
#include <i386/gas.h>
/* The rest must follow. */
#define DBX_DEBUGGING_INFO
#define SDB_DEBUGGING_INFO
#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
#define HANDLE_SYSV_PRAGMA
#undef HANDLE_PRAGMA_WEAK /* until the link format can handle it */
/* By default, target has a 80387, uses IEEE compatible arithmetic,
and returns float values in the 387 and needs stack probes
We also align doubles to 64-bits for MSVC default compatibility */
#undef TARGET_SUBTARGET_DEFAULT
#define TARGET_SUBTARGET_DEFAULT \
(MASK_80387 | MASK_IEEE_FP | MASK_FLOAT_RETURNS | MASK_STACK_PROBE | \
MASK_ALIGN_DOUBLE)
#undef TARGET_CPU_DEFAULT
#define TARGET_CPU_DEFAULT 2 /* 486 */
#define WCHAR_UNSIGNED 1
#define WCHAR_TYPE_SIZE 16
#define WCHAR_TYPE "short unsigned int"
/* WinNT (and thus Interix) use unsigned int */
#define SIZE_TYPE "unsigned int"
#define ASM_LOAD_ADDR(loc, reg) " leal " #loc "," #reg "\n"
/* cpp handles __STDC__ */
#undef CPP_PREDEFINES
#define CPP_PREDEFINES " \
-D__INTERIX \
-D__OPENNT \
-D_M_IX86=300 -D_X86_=1 \
-D__stdcall=__attribute__((__stdcall__)) \
-D__cdecl=__attribute__((__cdecl__)) \
-Asystem=unix -Asystem=interix"
#undef CPP_SPEC
/* Write out the correct language type definition for the header files.
Unless we have assembler language, write out the symbols for C.
cpp_cpu is an Intel specific variant. See i386.h
mieee is an Alpha specific variant. Cross polination a bad idea.
*/
#define CPP_SPEC "\
%{!.S: -D__LANGUAGE_C__ -D__LANGUAGE_C %{!ansi:-DLANGUAGE_C}} \
%{.S: -D__LANGUAGE_ASSEMBLY__ -D__LANGUAGE_ASSEMBLY %{!ansi:-DLANGUAGE_ASSEMBLY}} \
%{.cc: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
%{.cxx: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
%{.C: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
%{.m: -D__LANGUAGE_OBJECTIVE_C__ -D__LANGUAGE_OBJECTIVE_C} \
-remap \
%(cpp_cpu) \
%{posix:-D_POSIX_SOURCE} \
-isystem %$INTERIX_ROOT/usr/include"
#undef TARGET_VERSION
#define TARGET_VERSION fprintf (stderr, " (i386 Interix)");
/* The global __fltused is necessary to cause the printf/scanf routines
for outputting/inputting floating point numbers to be loaded. Since this
is kind of hard to detect, we just do it all the time. */
#ifdef ASM_FILE_START
#undef ASM_FILE_START
#endif
#define ASM_FILE_START(FILE) \
do { fprintf (FILE, "\t.file\t"); \
output_quoted_string (FILE, dump_base_name); \
fprintf (FILE, "\n"); \
fprintf (FILE, ".global\t__fltused\n"); \
} while (0)
/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
ASM_OUTPUT_LIMITED_STRING macros. Each byte in the table
corresponds to a particular byte value [0..255]. For any
given byte value, if the value in the corresponding table
position is zero, the given character can be output directly.
If the table value is 1, the byte must be output as a \ooo
octal escape. If the tables value is anything else, then the
byte value should be output as a \ followed by the value
in the table. Note that we can use standard UN*X escape
sequences for many control characters, but we don't use
\a to represent BEL because some svr4 assemblers (e.g. on
the i386) don't know about that. Also, we don't use \v
since some versions of gas, such as 2.2 did not accept it. */
#define ESCAPES \
"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1"
/* Some svr4 assemblers have a limit on the number of characters which
can appear in the operand of a .string directive. If your assembler
has such a limitation, you should define STRING_LIMIT to reflect that
limit. Note that at least some svr4 assemblers have a limit on the
actual number of bytes in the double-quoted string, and that they
count each character in an escape sequence as one byte. Thus, an
escape sequence like \377 would count as four bytes.
If your target assembler doesn't support the .string directive, you
should define this to zero.
*/
#define STRING_LIMIT ((unsigned) 256)
#define STRING_ASM_OP "\t.string\t"
/* The routine used to output NUL terminated strings. We use a special
version of this for most svr4 targets because doing so makes the
generated assembly code more compact (and thus faster to assemble)
as well as more readable, especially for targets like the i386
(where the only alternative is to output character sequences as
comma separated lists of numbers). */
#define ASM_OUTPUT_LIMITED_STRING(FILE, STR) \
do \
{ \
register const unsigned char *_limited_str = \
(const unsigned char *) (STR); \
register unsigned ch; \
fprintf ((FILE), "%s\"", STRING_ASM_OP); \
for (; (ch = *_limited_str); _limited_str++) \
{ \
register int escape = ESCAPES[ch]; \
switch (escape) \
{ \
case 0: \
putc (ch, (FILE)); \
break; \
case 1: \
fprintf ((FILE), "\\%03o", ch); \
break; \
default: \
putc ('\\', (FILE)); \
putc (escape, (FILE)); \
break; \
} \
} \
fprintf ((FILE), "\"\n"); \
} \
while (0)
/* The routine used to output sequences of byte values. We use a special
version of this for most svr4 targets because doing so makes the
generated assembly code more compact (and thus faster to assemble)
as well as more readable. Note that if we find subparts of the
character sequence which end with NUL (and which are shorter than
STRING_LIMIT) we output those using ASM_OUTPUT_LIMITED_STRING. */
#undef ASM_OUTPUT_ASCII
#define ASM_OUTPUT_ASCII(FILE, STR, LENGTH) \
do \
{ \
register const unsigned char *_ascii_bytes = \
(const unsigned char *) (STR); \
register const unsigned char *limit = _ascii_bytes + (LENGTH); \
register unsigned bytes_in_chunk = 0; \
for (; _ascii_bytes < limit; _ascii_bytes++) \
{ \
register const unsigned char *p; \
if (bytes_in_chunk >= 64) \
{ \
fputc ('\n', (FILE)); \
bytes_in_chunk = 0; \
} \
for (p = _ascii_bytes; p < limit && *p != '\0'; p++) \
continue; \
if (p < limit && (p - _ascii_bytes) <= (long) STRING_LIMIT) \
{ \
if (bytes_in_chunk > 0) \
{ \
fputc ('\n', (FILE)); \
bytes_in_chunk = 0; \
} \
ASM_OUTPUT_LIMITED_STRING ((FILE), _ascii_bytes); \
_ascii_bytes = p; \
} \
else \
{ \
if (bytes_in_chunk == 0) \
fprintf ((FILE), "\t.byte\t"); \
else \
fputc (',', (FILE)); \
fprintf ((FILE), "0x%02x", *_ascii_bytes); \
bytes_in_chunk += 5; \
} \
} \
if (bytes_in_chunk > 0) \
fprintf ((FILE), "\n"); \
} \
while (0)
/* Emit code to check the stack when allocating more that 4000
bytes in one go. */
#define CHECK_STACK_LIMIT 0x1000
/* the following are OSF linker (not gld) specific... we don't want them */
#undef HAS_INIT_SECTION
#undef LD_INIT_SWITCH
#undef LD_FINI_SWITCH
/* Note that there appears to be two different ways to support const
sections at the moment. You can either #define the symbol
READONLY_DATA_SECTION (giving it some code which switches to the
readonly data section) or else you can #define the symbols
EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and
SELECT_RTX_SECTION. We do both here just to be on the safe side. */
#define USE_CONST_SECTION 1
#define CONST_SECTION_ASM_OP "\t.section\t.rdata,\"r\""
/* A default list of other sections which we might be "in" at any given
time. For targets that use additional sections (e.g. .tdesc) you
should override this definition in the target-specific file which
includes this file. */
#undef EXTRA_SECTIONS
#define EXTRA_SECTIONS in_const
/* A default list of extra section function definitions. For targets
that use additional sections (e.g. .tdesc) you should override this
definition in the target-specific file which includes this file. */
#undef EXTRA_SECTION_FUNCTIONS
#define EXTRA_SECTION_FUNCTIONS \
CONST_SECTION_FUNCTION
#undef READONLY_DATA_SECTION
#define READONLY_DATA_SECTION() const_section ()
#define CONST_SECTION_FUNCTION \
void \
const_section () \
{ \
if (!USE_CONST_SECTION) \
text_section(); \
else if (in_section != in_const) \
{ \
fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP); \
in_section = in_const; \
} \
}
/* The MS compilers take alignment as a number of bytes, so we do as well */
#undef ASM_OUTPUT_ALIGN
#define ASM_OUTPUT_ALIGN(FILE,LOG) \
if ((LOG)!=0) fprintf ((FILE), "\t.balign %d\n", 1<<(LOG))
/* The linker will take care of this, and having them causes problems with
ld -r (specifically -rU). */
#define CTOR_LISTS_DEFINED_EXTERNALLY 1
#define SET_ASM_OP "\t.set\t"
/* Output a definition (implements alias) */
#define ASM_OUTPUT_DEF(FILE,LABEL1,LABEL2) \
do \
{ \
fprintf ((FILE), "%s", SET_ASM_OP); \
assemble_name (FILE, LABEL1); \
fprintf (FILE, ","); \
assemble_name (FILE, LABEL2); \
fprintf (FILE, "\n"); \
} \
while (0)
#define HOST_PTR_PRINTF "%p"
#define HOST_PTR_AS_INT unsigned long
#define PCC_BITFIELD_TYPE_MATTERS 1
#define PCC_BITFIELD_TYPE_TEST TYPE_NATIVE(rec)
#define GROUP_BITFIELDS_BY_ALIGN TYPE_NATIVE(rec)
/* The following two flags are usually "off" for i386, because some non-gnu
tools (for the i386) don't handle them. However, we don't have that
problem, so.... */
/* Forward references to tags are allowed. */
#define SDB_ALLOW_FORWARD_REFERENCES
/* Unknown tags are also allowed. */
#define SDB_ALLOW_UNKNOWN_REFERENCES
/* The integer half of this list needs to be constant. However, there's
a lot of disagreement about what the floating point adjustments should
be. We pick one that works with gdb. (The underlying problem is
what to do about the segment registers. Since we have access to them
from /proc, we'll allow them to be accessed in gdb, even tho the
gcc compiler can't generate them. (There's some evidence that
MSVC does, but possibly only for certain special "canned" sequences.) */
#undef DBX_REGISTER_NUMBER
#define DBX_REGISTER_NUMBER(n) \
(TARGET_64BIT ? dbx64_register_map[n] \
: (n) == 0 ? 0 \
: (n) == 1 ? 2 \
: (n) == 2 ? 1 \
: (n) == 3 ? 3 \
: (n) == 4 ? 6 \
: (n) == 5 ? 7 \
: (n) == 6 ? 5 \
: (n) == 7 ? 4 \
: ((n) >= FIRST_STACK_REG && (n) <= LAST_STACK_REG) ? (n)+8 \
: (-1))
/* Define this macro if references to a symbol must be treated
differently depending on something about the variable or
function named by the symbol (such as what section it is in).
Apply stddef, handle (as yet unimplemented) pic.
stddef renaming does NOT apply to Alpha. */
union tree_node;
const char *gen_stdcall_suffix PARAMS ((union tree_node *));
#undef ENCODE_SECTION_INFO
#define ENCODE_SECTION_INFO(DECL) \
do \
{ \
if (flag_pic) \
{ \
rtx rtl = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
? TREE_CST_RTL (DECL) : DECL_RTL (DECL)); \
SYMBOL_REF_FLAG (XEXP (rtl, 0)) \
= (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
|| ! TREE_PUBLIC (DECL)); \
} \
if (TREE_CODE (DECL) == FUNCTION_DECL) \
if (lookup_attribute ("stdcall", \
TYPE_ATTRIBUTES (TREE_TYPE (DECL)))) \
XEXP (DECL_RTL (DECL), 0) = \
gen_rtx (SYMBOL_REF, Pmode, gen_stdcall_suffix (DECL)); \
} \
while (0)
/* This macro gets just the user-specified name
out of the string in a SYMBOL_REF. Discard
trailing @[NUM] encoded by ENCODE_SECTION_INFO. */
#undef STRIP_NAME_ENCODING
#define STRIP_NAME_ENCODING(VAR,SYMBOL_NAME) \
do { \
const char *_p; \
const char *_name = SYMBOL_NAME; \
for (_p = _name; *_p && *_p != '@'; ++_p) \
; \
if (*_p == '@') \
{ \
int _len = _p - _name; \
char *_new_name = (char *) alloca (_len + 1); \
strncpy (_new_name, _name, _len); \
_new_name[_len] = '\0'; \
(VAR) = _new_name; \
} \
else \
(VAR) = _name; \
} while (0)
#if 0
/* Turn this back on when the linker is updated to handle grouped
.data$ sections correctly. See corresponding note in i386/interix.c.
MK. */
/* Define this macro if in some cases global symbols from one translation
unit may not be bound to undefined symbols in another translation unit
without user intervention. For instance, under Microsoft Windows
symbols must be explicitly imported from shared libraries (DLLs). */
#define MULTIPLE_SYMBOL_SPACES
extern void i386_pe_unique_section ();
#define UNIQUE_SECTION(DECL,RELOC) i386_pe_unique_section (DECL, RELOC)
#define SUPPORTS_ONE_ONLY 1
/* Switch into a generic section. */
#define TARGET_ASM_NAMED_SECTION default_pe_asm_named_section
#endif /* 0 */
/* DWARF2 Unwinding doesn't work with exception handling yet. */
#define DWARF2_UNWIND_INFO 0
/* Don't assume anything about the header files. */
#define NO_IMPLICIT_EXTERN_C